Cans Manufacturing is a wide range process that took place recently after the second world war .. It is now occupants more than 70% of our daily life .. Some techniques were discussed in this presentation..
Hope you will enjoy it :)
Presentation of the hot-dip galvanising process and of the different parameters that are important when choosing one product over another.
There are two suggestions for different types of treatment lines: a fully acid line with enhanced protection for rough environments needing passivation and another line with alkaline degreasing for extremely greasy parts.
dental Investment materials/ orthodontic course by indian dental academyIndian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry, Periodontics and General Dentistry.
Hexagonal Boron Nitride Aerosol Spray offers convenient way to apply thin film of coating on any surface as well as in hard to reach places. it spray is high temperature, anti-stick release agent & lubricant.
Features:
•Bonds well with substrates and forms a coating film
•Excellent lubricating properties
•Good chemical inertness
•Electrical insulator
•Thermal conductor (result: better heat dissipation)
•High temperature stability (1000 deg C in air, 1400 deg C in vacuum & 1800 deg C in inert gas)
•Low thermal expansion
•Low dielectric constant
•Non-wetting
•Contains no fluorocarbons or lead
•Not harmful to Ozone
Applications:
•Welding & Brazing: Protects from weld spatter
•Sintering: Eliminates sticking & carbon contamination
•Plastic & Rubber Molds: For release
•Glass making: Improves mold/die life
•Molten metal processing & metal forming: Inhibits corrosion
•Casting, extrusion, forging & stamping
•High temperature protective release coatings
Cans Manufacturing is a wide range process that took place recently after the second world war .. It is now occupants more than 70% of our daily life .. Some techniques were discussed in this presentation..
Hope you will enjoy it :)
Presentation of the hot-dip galvanising process and of the different parameters that are important when choosing one product over another.
There are two suggestions for different types of treatment lines: a fully acid line with enhanced protection for rough environments needing passivation and another line with alkaline degreasing for extremely greasy parts.
dental Investment materials/ orthodontic course by indian dental academyIndian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training center with best faculty and flexible training programs for dental professionals who wish to advance in their dental practice,Offers certified courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry, Prosthetic Dentistry, Periodontics and General Dentistry.
Hexagonal Boron Nitride Aerosol Spray offers convenient way to apply thin film of coating on any surface as well as in hard to reach places. it spray is high temperature, anti-stick release agent & lubricant.
Features:
•Bonds well with substrates and forms a coating film
•Excellent lubricating properties
•Good chemical inertness
•Electrical insulator
•Thermal conductor (result: better heat dissipation)
•High temperature stability (1000 deg C in air, 1400 deg C in vacuum & 1800 deg C in inert gas)
•Low thermal expansion
•Low dielectric constant
•Non-wetting
•Contains no fluorocarbons or lead
•Not harmful to Ozone
Applications:
•Welding & Brazing: Protects from weld spatter
•Sintering: Eliminates sticking & carbon contamination
•Plastic & Rubber Molds: For release
•Glass making: Improves mold/die life
•Molten metal processing & metal forming: Inhibits corrosion
•Casting, extrusion, forging & stamping
•High temperature protective release coatings
Alpha Metal Finishing provided a hardcoat anodizing lunch and learn presentation in May 2014. Special thanks to Rob Pawson from Reliant Aluminum Products for assisting us.
Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify.
this process is must in many industries for production.
i have made all the slide for civil engineering and poly diploma civil.
these are 100% correct but in case of some error comment down or contact me on (laxmans227@gmail.com)
follow me for all updates
if u have any doubt fell free to ask on comment section
so keep calm and follow me(now).
software - power point presentation 2015
High resistance to high and constant temperatures (up to 300°C), Sealing of non porous surfaces, Suitable for industrial use, Suitable for sealing glass, ceramic, metal
Alpha Metal Finishing provided a hardcoat anodizing lunch and learn presentation in May 2014. Special thanks to Rob Pawson from Reliant Aluminum Products for assisting us.
Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify.
this process is must in many industries for production.
i have made all the slide for civil engineering and poly diploma civil.
these are 100% correct but in case of some error comment down or contact me on (laxmans227@gmail.com)
follow me for all updates
if u have any doubt fell free to ask on comment section
so keep calm and follow me(now).
software - power point presentation 2015
High resistance to high and constant temperatures (up to 300°C), Sealing of non porous surfaces, Suitable for industrial use, Suitable for sealing glass, ceramic, metal
Organic binders:
Organic binders are combustible and are destroyed by heat. Hence they contribute a degree of collapsibility to the core and mould sand mixture. The commonly used organic binders are core oil (0.5 to 3 %), cereal (0.5 to 2 %), resins, plastics, pitch, dextrin, molasses, rosin, lignin, casein, gelatin, wood flour etc.
Inorganic binders:
Inorganic binders are not combustible and may have considerable strength at high temperatures, resistance to erosion and relatively non-collapsables depending on their nature. The commonly used inorganic binders in core and mould making are Fire clay (< 2 %), bentonites (0.5 to 2 %), silica flour (< 30 %), iron oxide, sodium silicate etc.
Sri Murugan Paint Company, was established as a prime manufacturer and supplier of Paints and Primers for metallic and non-metallic surfaces in the year, 1980. For over more than three decades.
Best Quality Anode Manufacturer & Supplier Company - Supercon Indiasapna prasad
We are Leading Company for Different Anode Manufacturer and Suppliers Company in India, UAE, Saudi Arabia, Australia. Lead Tin Anode, Chrome Plating Anode, Electroplating Anode, Sacrificial Anode, Nickel Anodes, Zinc Anode, Aluminium Anode, Magnesium Anode Manufacturer.
Supercon India are leading manufacturer and Supplier of Sacrificial Anode in India, UAE, Saudi Arabia, Australia Location. Manufacturer of Sacrificial Anode by using Zinc, Aluminium, magnesium. Visit now for more details - superconindia.com
Supercon India is a leading Chrome Plating Anode manufacturer and supplier offering Good quality products to industries across India, UAE, Saudi Arabia, Australia. With many years of experience in the industry.
Best Plating Chemical, Equipment, Anodes Manufacturer & Suppliersapna prasad
SuperconIndia.com is Leading Manufacturer and Supplier of Plating Equipments, Anode from India, UAE, Saudi Arabia, Australia. And has a good reputation in the market. Plating anode used in different electroplating applications like Copper, cadmium, Tin Plating Anode Avaliable.
Lead Tin Anodes Manufacturer & Supplier - Supercon Indiasapna prasad
We are manufacturer and Supplier of Lead Anode, Lead Tin Anode in India, UAE, Saudi Arabia, Australia Location. We can also provide special-shaped anodes. Visit now for more details - superconindia.com
1. CERAMIC COLOURS
l Enamel Colours : stable unto 900°C.
l Overglaze Colours : stable unto 800°C.
l Pigments for Overglaze colours :
l Stains for Glazes : stable unto 1400°C.
Also:
High Temperature Stable Inorganic
Pigments
Suitable for automobile paints, blow-moulded
plastics, chimney paints, outdoor paints and
wherever light-fast colours re required.
BONDING FRITS
• Organic glues are just not hard enough
to bind the abrasive materials required
for durable grinding wheels. Bonding
Frits are glass-like ceramic materials,
which are powdered and compacted
with the abrasive materials required for
grinding wheels. The frit forms hard
ceramic mass, with the abrasive grains
embedded within it. These grains are
not easily displaced.
• We manufacture bonding frits of
different hardness and melting
temperatures, to suit our customers
needs.
FRITTED TRACES
• As human beings need vitamins to
supplement their diets, plants need trace
quantities of certain elements, such as
cobalt, nickel, zinc, iron. Borax, etc. for full
health and growth. These oxides can be
supplied as metal salts, but these salts will be
washed away with the first rains, and 90-95%
of the metal salts are not only wasted, but go
to areas where they are not required, and
add to chemical pollution of our rivers and
seas.
• The best way to supply plants with these
essential trace elements is by way of 'Fritted
Traces' - i.e. glassy granules which contain
the required essential elements. These frits
are sparingly soluble, so that plants get only
the required quantity of trace elements, and
they are large, heavy grains, which will mix
with the soil, and not wash away easily.