Galil accelera accessories_Spec Sheet
•
1 like•128 views
The document describes Galil's Accelera series motion controllers, highlighting their high processing speeds of up to 40 microseconds and 32 kHz servo loop updates, which is significantly faster than prior generations. It provides details on the standard features of the Accelera controllers like their 1-8 axis models, mix of stepper and servo support, programming memory, and integrated drive options. The Accelera series offers powerful and fully loaded motion control with sizzling speeds.
Report
Share
Report
Share
Download to read offline
Recommended
Galil single axis motion controller brochure
This document summarizes the features and specifications of the Galil DMC-30000 series motion controllers. The controllers offer flexible configurations as card-level or box-level units with Ethernet and RS-232 connectivity. They provide powerful motion control capabilities with integrated amplifiers, multi-axis support over Ethernet, and programming in multiple motion modes. Specifications include encoder rates, I/O, memory, and voltage ranges for the various controller models.
Kannad 406 as
The KANNAD 406 AS is a new generation emergency locator transmitter (ELT) that complies with the latest COSPAS-SARSAT regulations. It transmits on 406 MHz for precise global positioning via satellite, as well as on 121.5 MHz and 243 MHz. The ELT is small, lightweight, and floats, making it suitable for carrying in liferafts. It has a 6-year battery life and transmits identification information to avoid unnecessary search and rescue operations. Optional accessories include a carry case and mounting bracket.
AQYR-ThinPACK-AutoAQYR-Terminal-3-16-WEB
The document describes the ThinPACK AutoAQYR Terminal, a next-generation rapidly deployable satellite communication terminal from AQYR & ThinKom. The terminal features AQYR's AutoAQYR software for fast acquisition and packs into a single rugged case. It provides high-speed broadband Ka-band connectivity for commercial and government users through an ultra-portable, lightweight flat panel antenna. Special operations forces, reporters, medical workers and others can get internet access even in remote locations lacking communications infrastructure.
Project poster: SDR platform elements
This document describes a universal digital modulator board from SagaxSagax Ltd. that contains several technology enhancements. The board includes an FPGA, digital upconverter, CPLD-based cross-connects, and interpolating DACs. It can be used as a mezzanine card on a DSP board for applications such as multichannel and phased array systems. The document also mentions the development of a universal PCI-based analog to digital converter card with one input and output channel, 80MHz sampling, and slave mode PCI interface.
UHP_JUN16E
UHP Networks develops a universal hardware platform (UHP) that provides a carrier-grade VSAT solution for high-throughput satellites. The UHP platform supports multiple modes of operation including SCPC, TDM/TDMA, mesh, and hubless TDMA networks. It offers high efficiency, scalability, reliability and quality of service features to take advantage of increased satellite capacity enabled by high-throughput satellites.
Hardware required to build a basic Robot
This document provides information about hardware components used in a microcontroller project including an ATmega16 microcontroller, L293D motor driver IC, 7805 voltage regulator, and an AVR development board. It describes the ATmega16 architecture and pin configuration, the functions of the L293D for driving motors, specifications of the 7805 voltage regulator for providing 5V power, and briefly mentions the AVR development board.
American Fibertek RR92485SL Data Sheet
Buy the American Fibertek RR92485SL at JMAC Supply.
https://www.jmac.com/American_Fibertek_RR92485SL_p/american-fibertek-rr92485sl.htm?=slideshare
Kannad 406 af compact
The Kannad 406 AF-COMPACT is a small, rugged emergency locator transmitter that transmits on both 406 MHz and 121.5 MHz frequencies. It is approved for use in light aircraft and is designed to be easily installed. The unit has a six-year battery life and automatically activates in a crash via an integrated shock sensor. It can also be manually activated. Programming options allow customization with aircraft data.
Recommended
Galil single axis motion controller brochure
This document summarizes the features and specifications of the Galil DMC-30000 series motion controllers. The controllers offer flexible configurations as card-level or box-level units with Ethernet and RS-232 connectivity. They provide powerful motion control capabilities with integrated amplifiers, multi-axis support over Ethernet, and programming in multiple motion modes. Specifications include encoder rates, I/O, memory, and voltage ranges for the various controller models.
Kannad 406 as
The KANNAD 406 AS is a new generation emergency locator transmitter (ELT) that complies with the latest COSPAS-SARSAT regulations. It transmits on 406 MHz for precise global positioning via satellite, as well as on 121.5 MHz and 243 MHz. The ELT is small, lightweight, and floats, making it suitable for carrying in liferafts. It has a 6-year battery life and transmits identification information to avoid unnecessary search and rescue operations. Optional accessories include a carry case and mounting bracket.
AQYR-ThinPACK-AutoAQYR-Terminal-3-16-WEB
The document describes the ThinPACK AutoAQYR Terminal, a next-generation rapidly deployable satellite communication terminal from AQYR & ThinKom. The terminal features AQYR's AutoAQYR software for fast acquisition and packs into a single rugged case. It provides high-speed broadband Ka-band connectivity for commercial and government users through an ultra-portable, lightweight flat panel antenna. Special operations forces, reporters, medical workers and others can get internet access even in remote locations lacking communications infrastructure.
Project poster: SDR platform elements
This document describes a universal digital modulator board from SagaxSagax Ltd. that contains several technology enhancements. The board includes an FPGA, digital upconverter, CPLD-based cross-connects, and interpolating DACs. It can be used as a mezzanine card on a DSP board for applications such as multichannel and phased array systems. The document also mentions the development of a universal PCI-based analog to digital converter card with one input and output channel, 80MHz sampling, and slave mode PCI interface.
UHP_JUN16E
UHP Networks develops a universal hardware platform (UHP) that provides a carrier-grade VSAT solution for high-throughput satellites. The UHP platform supports multiple modes of operation including SCPC, TDM/TDMA, mesh, and hubless TDMA networks. It offers high efficiency, scalability, reliability and quality of service features to take advantage of increased satellite capacity enabled by high-throughput satellites.
Hardware required to build a basic Robot
This document provides information about hardware components used in a microcontroller project including an ATmega16 microcontroller, L293D motor driver IC, 7805 voltage regulator, and an AVR development board. It describes the ATmega16 architecture and pin configuration, the functions of the L293D for driving motors, specifications of the 7805 voltage regulator for providing 5V power, and briefly mentions the AVR development board.
American Fibertek RR92485SL Data Sheet
Buy the American Fibertek RR92485SL at JMAC Supply.
https://www.jmac.com/American_Fibertek_RR92485SL_p/american-fibertek-rr92485sl.htm?=slideshare
Kannad 406 af compact
The Kannad 406 AF-COMPACT is a small, rugged emergency locator transmitter that transmits on both 406 MHz and 121.5 MHz frequencies. It is approved for use in light aircraft and is designed to be easily installed. The unit has a six-year battery life and automatically activates in a crash via an integrated shock sensor. It can also be manually activated. Programming options allow customization with aircraft data.
American Fibertek MT-89CA-AX Data Sheet
Buy the American Fibertek MT-89CA-AX at JMAC Supply.
https://www.jmac.com/American_Fibertek_MT_89CA_AX_p/american-fibertek-mt-89ca-ax.htm?=slideshare
American Fibertek MTX-91685C-SL Data Sheet
The American Fibertek 91685C-SL Series transmits 16 channels of high-quality 10 Bit digitized video and two channels of multi-protocol data on a single optical fiber using WDM technology. It requires no field adjustments during installation or maintenance thereafter and has diagnostic indicators to provide system status. The equipment consists of a 1 RU housing containing video and WDM passive optics.
Kramer 4x1V
The 4x1V is a high-performance mechanical switcher that switches one of four composite video signals from RCA inputs to a single RCA output. It has a bandwidth of 400MHz and uses mechanical switching without requiring power. The compact device can be rack mounted in 1U of space using an optional rack adapter.
Kannad 406 survival
The KANNAD 406 SURVIVAL is a new generation emergency locator transmitter that complies with the latest 406 MHz COSPAS-SARSAT regulations. It provides precise global positioning when activated in an emergency through multiple satellite detection. The ELT is automatically activated upon contact with water and transmits a unique distress signal with aircraft identification information. It has a 6-year battery life and can be installed inside an aircraft or in an optional carry-off bag.
Intelligent road roller
This document describes an intelligent road roller that uses IR sensors to detect pits in the road. It has two main components:
1. Robo 1 uses IR sensors, a comparator, Arduino, H-bridge and encoder to detect pit holes and transmit the signals via RF link to Robo 2.
2. Robo 2 receives the signals via an RF receiver and decoder connected to a servo motor, DC motor and buzzer. The system allows for real-time monitoring of pit detection on the road surface.
ComNet FVT20 Data Sheet
Buy the ComNet FVT20 at JMAC Supply.
http://www.jmac.com/ComNet_FVT20_p/comnet-fvt20.htm?=slideshare
American Fibertek RT-946C-SL Data Sheet
Buy the American Fibertek RT-946C-SL at JMAC Supply.
https://www.jmac.com/American_Fibertek_RT_946C_SL_p/american-fibertek-rt-946c-sl.htm?=slideshare
High Performance KVM
This document discusses high performance KVM (keyboard, video, mouse) solutions from ATEN for applications such as traffic management centers, command and control centers, and broadcasting. It provides an overview of ATEN's KVM topology and unique features including 4K video resolution over HDMI, SFP optical modules with 10km transmission, and Power over Ethernet compliance. A table compares the specifications of various ATEN KVM switch and extender models.
Advanced motion controls dq111se25a20nac h
The DQ111SE-H Series is a fully digital servo drive for brushed and brushless motors. It features space vector modulation, a 20kHz digital current loop, sine/cosine encoder interface, hall sensor or encoder commutation, and SynqNet network interface. The drive provides motor control along with dedicated digital and analog inputs and outputs.
Advanced motion controls dq111se30a40nac
The DQ111SE30A40NAC is a digital servo drive that controls brushed and brushless motors. It features space vector modulation, programmable gains, encoder feedback support, I/O, and a SynqNet interface for motion control networking. The drive provides motor control, I/O, parameter storage, and protection in a compact size.
Advanced motion controls dq111se25a20nac
The DQ111SE25A20NAC is a fully digital servo drive for brushed and brushless motors. It features space vector modulation, a 20kHz digital current loop, sine/cosine encoder feedback, and SynqNet network interface for configuration. It provides motor control along with dedicated digital and analog inputs/outputs.
Advanced motion controls dq111se15a40nac
The DQ111SE15A40NAC is a fully digital servo drive with space vector modulation and vector control. It features a SynqNet motion control network interface, programmable digital and analog inputs/outputs, and protection against over-voltage, under-voltage, and over-current. Configuration is done through a Windows-based software via the SynqNet interface.
Advanced motion controls dq111se40a8bdc
The DQ111SE Series is a fully digital PWM servo drive designed to control brushed and brushless motors. It features space vector modulation, a SynqNet motion control interface, programmable digital and analog I/O, and protection against overvoltage, undervoltage, and overcurrent. The drive provides torque control of motors and integrated feedback processing from absolute encoders. It is a small, cost-effective solution for networked motion control applications.
500 12
The document provides technical specifications for HR Smith's Series 500-12 Multi Function Personal Locator Beacons. The beacons can be used manually or automatically via ejection seat harness. They transmit homing signals on 121.5MHz, 243MHz and 406.025MHz frequencies and meet various NATO and regulatory standards. The beacons are compact at 150mm x 87.5mm x 37.5mm, weigh 600g, and have a 10-year battery life with replacement every 5 years.
Kramer VA-1DVI
The VA-1DVI is an EDID emulator that can capture an EDID setting from a DVI output and store it in non-volatile memory. It has DVI-D inputs and outputs that support data rates up to 3.3Gbps. The ultra-compact device is small enough to rack mount four units side-by-side using an optional rack adapter.
Advanced motion controls dq111se30a40nac h
The DQ111SE-H Series is a digital servo drive that controls brushed and brushless motors. It features fully digital control using space vector modulation for efficient motor control. It has interfaces for motor feedback, I/O, and SynqNet networking. The drive provides torque control of motors and integrated protection from overvoltage, undervoltage, and overcurrent.
Advanced motion controls dq111se15a40nac h
The DQ111SE-H series digital servo drive is designed to control brushed and brushless motors. It features fully digital control using space vector modulation for high efficiency. The drive includes interfaces for motor feedback such as encoders, inputs and outputs for control, and a SynqNet interface for digital networking. Commissioning and setup are done through Windows software connected via SynqNet.
Scada1
The document provides an overview of SCADA (Supervisory Control and Data Acquisition) systems used in power system management. It discusses:
1) SCADA allows remote monitoring and control of equipment by collecting data from devices in the field and presenting it for user-friendly monitoring and analysis.
2) In power systems, SCADA is used to monitor generation stations, substations, transmission lines to efficiently manage the system.
3) Key components include RTUs (Remote Terminal Units) that interface with field devices to collect data, communication networks to transmit data to control centers, and HMI software for operators.
Multipilot pres-ufficiale last 2
The document summarizes the Multipilot 32 board, which is a flight controller board developed by Laser Navigation for UAV systems. It has an ARM Cortex-M3 processor and supports various sensors, ESCs, servos, and communication protocols. It can be used with various open source autopilot projects and is supported by an online community and commercial partners. It is available for pre-order at a price of $99 or €70.
ACRV Research Fellow Intro/Tutorial [Vision and Action]
A short introduction about me and my work at the Queensland University of Technology (QUT) for the Australian Centre of Excellence for Robotic Vision.
Giving some background in Image Based Visual Servoing (IBVS) and some research goals/ideas/avenues...
Keeping it light and simple (hopefully..)
Multipilot pres-ufficiale def
- The document describes the Multipilot 32, a flight controller board developed by LASER NAVIGATION.
- It has an ARM Cortex-M3 processor, 512KB flash memory, 64KB RAM, and interfaces for sensors, radios, motors and more.
- The board runs ChibiOS or VROS and supports projects like OpenPilot, AutoPilot and Paparazzi. It is compatible with many sensors, radios and brushless ESC/servos.
- Developers can use IDEs like CooCox, Eclipse, or commercial options, with libraries for sensor control, radio control and more.
- The Multipilot 32 is available for pre-
Vision based autonomous robot navigation
This chapter discusses the development of a low-cost vision-based mobile robot created indigenously in a laboratory. It describes two microcontroller-based sensor systems that were developed for the robot: 1) An IR range finder system with dynamic range enhancement capability using a PIC microcontroller. This system enhances the sensor range from 25-50cm to 10-50cm. 2) An optical proximity detector system utilizing switching-mode synchronous detection to operate accurately under varying ambient light conditions. The chapter provides details on the design and experimental results of these sensor systems.
More Related Content
What's hot
American Fibertek MT-89CA-AX Data Sheet
Buy the American Fibertek MT-89CA-AX at JMAC Supply.
https://www.jmac.com/American_Fibertek_MT_89CA_AX_p/american-fibertek-mt-89ca-ax.htm?=slideshare
American Fibertek MTX-91685C-SL Data Sheet
The American Fibertek 91685C-SL Series transmits 16 channels of high-quality 10 Bit digitized video and two channels of multi-protocol data on a single optical fiber using WDM technology. It requires no field adjustments during installation or maintenance thereafter and has diagnostic indicators to provide system status. The equipment consists of a 1 RU housing containing video and WDM passive optics.
Kramer 4x1V
The 4x1V is a high-performance mechanical switcher that switches one of four composite video signals from RCA inputs to a single RCA output. It has a bandwidth of 400MHz and uses mechanical switching without requiring power. The compact device can be rack mounted in 1U of space using an optional rack adapter.
Kannad 406 survival
The KANNAD 406 SURVIVAL is a new generation emergency locator transmitter that complies with the latest 406 MHz COSPAS-SARSAT regulations. It provides precise global positioning when activated in an emergency through multiple satellite detection. The ELT is automatically activated upon contact with water and transmits a unique distress signal with aircraft identification information. It has a 6-year battery life and can be installed inside an aircraft or in an optional carry-off bag.
Intelligent road roller
This document describes an intelligent road roller that uses IR sensors to detect pits in the road. It has two main components:
1. Robo 1 uses IR sensors, a comparator, Arduino, H-bridge and encoder to detect pit holes and transmit the signals via RF link to Robo 2.
2. Robo 2 receives the signals via an RF receiver and decoder connected to a servo motor, DC motor and buzzer. The system allows for real-time monitoring of pit detection on the road surface.
ComNet FVT20 Data Sheet
Buy the ComNet FVT20 at JMAC Supply.
http://www.jmac.com/ComNet_FVT20_p/comnet-fvt20.htm?=slideshare
American Fibertek RT-946C-SL Data Sheet
Buy the American Fibertek RT-946C-SL at JMAC Supply.
https://www.jmac.com/American_Fibertek_RT_946C_SL_p/american-fibertek-rt-946c-sl.htm?=slideshare
High Performance KVM
This document discusses high performance KVM (keyboard, video, mouse) solutions from ATEN for applications such as traffic management centers, command and control centers, and broadcasting. It provides an overview of ATEN's KVM topology and unique features including 4K video resolution over HDMI, SFP optical modules with 10km transmission, and Power over Ethernet compliance. A table compares the specifications of various ATEN KVM switch and extender models.
Advanced motion controls dq111se25a20nac h
The DQ111SE-H Series is a fully digital servo drive for brushed and brushless motors. It features space vector modulation, a 20kHz digital current loop, sine/cosine encoder interface, hall sensor or encoder commutation, and SynqNet network interface. The drive provides motor control along with dedicated digital and analog inputs and outputs.
Advanced motion controls dq111se30a40nac
The DQ111SE30A40NAC is a digital servo drive that controls brushed and brushless motors. It features space vector modulation, programmable gains, encoder feedback support, I/O, and a SynqNet interface for motion control networking. The drive provides motor control, I/O, parameter storage, and protection in a compact size.
Advanced motion controls dq111se25a20nac
The DQ111SE25A20NAC is a fully digital servo drive for brushed and brushless motors. It features space vector modulation, a 20kHz digital current loop, sine/cosine encoder feedback, and SynqNet network interface for configuration. It provides motor control along with dedicated digital and analog inputs/outputs.
Advanced motion controls dq111se15a40nac
The DQ111SE15A40NAC is a fully digital servo drive with space vector modulation and vector control. It features a SynqNet motion control network interface, programmable digital and analog inputs/outputs, and protection against over-voltage, under-voltage, and over-current. Configuration is done through a Windows-based software via the SynqNet interface.
Advanced motion controls dq111se40a8bdc
The DQ111SE Series is a fully digital PWM servo drive designed to control brushed and brushless motors. It features space vector modulation, a SynqNet motion control interface, programmable digital and analog I/O, and protection against overvoltage, undervoltage, and overcurrent. The drive provides torque control of motors and integrated feedback processing from absolute encoders. It is a small, cost-effective solution for networked motion control applications.
500 12
The document provides technical specifications for HR Smith's Series 500-12 Multi Function Personal Locator Beacons. The beacons can be used manually or automatically via ejection seat harness. They transmit homing signals on 121.5MHz, 243MHz and 406.025MHz frequencies and meet various NATO and regulatory standards. The beacons are compact at 150mm x 87.5mm x 37.5mm, weigh 600g, and have a 10-year battery life with replacement every 5 years.
Kramer VA-1DVI
The VA-1DVI is an EDID emulator that can capture an EDID setting from a DVI output and store it in non-volatile memory. It has DVI-D inputs and outputs that support data rates up to 3.3Gbps. The ultra-compact device is small enough to rack mount four units side-by-side using an optional rack adapter.
Advanced motion controls dq111se30a40nac h
The DQ111SE-H Series is a digital servo drive that controls brushed and brushless motors. It features fully digital control using space vector modulation for efficient motor control. It has interfaces for motor feedback, I/O, and SynqNet networking. The drive provides torque control of motors and integrated protection from overvoltage, undervoltage, and overcurrent.
Advanced motion controls dq111se15a40nac h
The DQ111SE-H series digital servo drive is designed to control brushed and brushless motors. It features fully digital control using space vector modulation for high efficiency. The drive includes interfaces for motor feedback such as encoders, inputs and outputs for control, and a SynqNet interface for digital networking. Commissioning and setup are done through Windows software connected via SynqNet.
Scada1
The document provides an overview of SCADA (Supervisory Control and Data Acquisition) systems used in power system management. It discusses:
1) SCADA allows remote monitoring and control of equipment by collecting data from devices in the field and presenting it for user-friendly monitoring and analysis.
2) In power systems, SCADA is used to monitor generation stations, substations, transmission lines to efficiently manage the system.
3) Key components include RTUs (Remote Terminal Units) that interface with field devices to collect data, communication networks to transmit data to control centers, and HMI software for operators.
What's hot (18)
Viewers also liked
Multipilot pres-ufficiale last 2
The document summarizes the Multipilot 32 board, which is a flight controller board developed by Laser Navigation for UAV systems. It has an ARM Cortex-M3 processor and supports various sensors, ESCs, servos, and communication protocols. It can be used with various open source autopilot projects and is supported by an online community and commercial partners. It is available for pre-order at a price of $99 or €70.
ACRV Research Fellow Intro/Tutorial [Vision and Action]
A short introduction about me and my work at the Queensland University of Technology (QUT) for the Australian Centre of Excellence for Robotic Vision.
Giving some background in Image Based Visual Servoing (IBVS) and some research goals/ideas/avenues...
Keeping it light and simple (hopefully..)
Multipilot pres-ufficiale def
- The document describes the Multipilot 32, a flight controller board developed by LASER NAVIGATION.
- It has an ARM Cortex-M3 processor, 512KB flash memory, 64KB RAM, and interfaces for sensors, radios, motors and more.
- The board runs ChibiOS or VROS and supports projects like OpenPilot, AutoPilot and Paparazzi. It is compatible with many sensors, radios and brushless ESC/servos.
- Developers can use IDEs like CooCox, Eclipse, or commercial options, with libraries for sensor control, radio control and more.
- The Multipilot 32 is available for pre-
Vision based autonomous robot navigation
This chapter discusses the development of a low-cost vision-based mobile robot created indigenously in a laboratory. It describes two microcontroller-based sensor systems that were developed for the robot: 1) An IR range finder system with dynamic range enhancement capability using a PIC microcontroller. This system enhances the sensor range from 25-50cm to 10-50cm. 2) An optical proximity detector system utilizing switching-mode synchronous detection to operate accurately under varying ambient light conditions. The chapter provides details on the design and experimental results of these sensor systems.
Servo drive application for bomb disposal robot
The Tweeter and Whistle Servo Drive Controller were found to be the lightest and most efficient servo controllers with the most intelligence for the remote manipulation and handling system challenge.
Line following bot without using micro controller
This document discusses the key components and design of a basic line-following robot. It describes the main sensory systems as photoresistors, phototransistors, and photodiodes to collect information about the environment. It then explains the data processing and motor control systems that interpret sensor input and decide the robot's actions. Finally, it outlines different drive systems like DC motors, stepper motors and servo motors to implement the motor controller's signals.
Day 2 slides UNO summer 2010 robotics workshop
Day 2 of the robotics workshop focused on designing autonomous intelligence for robots through controllers. The controller acts as the robot's "brain" by reading sensor input, processing that data, and sending output to actuators. Students learned to code simple controllers and reviewed more complex examples, including obstacle avoidance, line following, and state-based object following with a camera. Plans for Day 3 included programming basic behaviors on the e-puck robot.
Arduino Ch3 : Tilt Sensing Servo Motor Controller
Sensors allow us to operate industrial and consumer products that use physical stimuli such as touch, sound, and motion. In this chapter, we will build a device to detect the orientation of an object using a tilt control switch to control the servo motor.
Application of electric and electronic drives in robotics
This document discusses the application of electric and electronic drives in robotics. It provides a brief history of early robots like Elektro from 1939. It describes the main types of electric drives - DC servo motors and DC stepper motors. It includes block diagrams of electric drive systems and components like the ATmega 32 microcontroller. It discusses sensors and potential applications of robots in areas like medical operations, welding, inspection and military. In conclusion, robots allow humans to work more productively while maintaining a high degree of accuracy.
Arduino Presentation
A very basic Arduino presentation with quite old projects, a brief Officine Arduino presentation and Fablab Torino.
These imagines and concepts are related and based over the work of Massimo Banzi and the Arduino Team, Alexandra Dechamps-Sonsino, Enrico Bassi.
Servo Based 5 Axis Robotic Arm Project Report
Robo India presents a project report on servo motor based 5 axis robotic arm.
This project is operated through PC software that is made in Visual Basic. AVR family's Atmel Atmega 8 is used in controller board, it runs on Arduino IDE platform.
Detailed mechnical drawings of all of the parts are also given.
We welcome all of your views and queries.
Thanks & Regards
Team Robo India
www.roboindia.com
info@roboindia.com
Introduction to Arduino
This document introduces Arduino, an open-source electronics prototyping platform. It discusses that Arduino is intended for artists, designers, hobbyists to create interactive objects. It then describes the Arduino hardware, including the microcontroller, I/O pins, and official and third party boards. It also covers the Arduino programming environment and language, and provides examples of common tasks like reading buttons and displaying to serial. Finally, it discusses common sensors, motors, and modules used with Arduino and points to the active Arduino community for support.
Introduction to Arduino and Circuits
Workshop I delivered at Code4LibDC Unconference 2014 on open hardware and arduino for libraries and archives.
Intro to Arduino
The document provides an overview of the Arduino platform, including what it is, what it is used for, and how to get started using it. Key points:
- Arduino is an open-source hardware and software platform for building interactive electronic projects through a simple programming language.
- It is used for physical computing projects, interactive installations, and rapid prototyping. Projects can include sensors and actuators.
- Getting started requires an Arduino board, USB cable, power supply, and downloading the IDE (integrated development environment) to write and upload code. Basic electrical safety knowledge is also important.
Arduino Development For Beginners
18/03/2010 - FTS seminar series @ Cardiff Univesity, Computer Science. Pete Woznowski and Rich Coombs one hour presentation on Arduino. Some info on Arduino and the talk: Arduino is a hardware and software platform for developing electronic devices and applications, aimed at being fun and accessible to everyone. Think Lego Mindstorms, but aimed intentionally at adults (rather than aimed at children and incidentally used by adults :)). The scope and potential for Arduino is huge. It has been used to develop simple applications like pedometers and networked environmental sensors, to art exhibits and remote controlled vehicles. The talk aims to give an overview of the Arduino platform and a brief introduction to designing and programming Arduino applications, along with some demonstrations.
Artificial intelligence Robotics arm & robotics eye
This document discusses the components and functions of robotic arms. It describes that a typical robotic arm is made up of metal segments joined by joints that are connected to servo motors which allow the arm to be positioned accurately. The arm resembles a human arm with equivalent parts like a shoulder, elbow, and wrist. Modern robotic arms are computer controlled and can perform tasks like welding, gripping, and assembly with great precision. Robotic arms have various industrial and military applications.
Outline
Omni-directional Vision and 3D Animation Based Teleoperation of Hydraulically Actuated Hexapod Robot COMET-IV
H. Ohroku and K. Nonami
Graduate School of Science and Technology, Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba-shi, Chiba, 263-8522, Japan
Introduction to arduino
This document provides an introduction to line follower competitions using Arduino microcontrollers. It discusses what a microcontroller is and types of Arduino boards. The coding structure is explained, covering data types, functions, control statements and loop statements. A workshop section describes how to control a DC motor using Arduino to rotate clockwise for 2 seconds and counter-clockwise for 5 seconds in an infinite loop.
Viewers also liked (18)
ACRV Research Fellow Intro/Tutorial [Vision and Action]
ACRV Research Fellow Intro/Tutorial [Vision and Action]
Application of electric and electronic drives in robotics
Application of electric and electronic drives in robotics
Artificial intelligence Robotics arm & robotics eye
Artificial intelligence Robotics arm & robotics eye
Similar to Galil accelera accessories_Spec Sheet
Galil multi axis motion controller brochure
This document summarizes and compares the specifications of two motion controller products from Galil: the DMC-40x0 Accelera Series and DMC-41x3 Econo Series. The Accelera Series offers higher performance capabilities like faster encoder rates and servo updates, along with more communication ports and I/O options. The Econo Series provides more basic motion control with lower costs. Both support multi-axis control of stepper and servo motors with flexible programming and I/O options.
Galil dmc 42x0 catalog
The DMC-42x0 is a high performance motion controller that can control 1-8 axes of motion. It accepts encoder inputs up to 22 MHz and provides fast servo update rates. The controller includes I/O such as isolated inputs, TTL outputs, and analog inputs. It offers advanced motion control features like PID compensation, multitasking, and various motion modes. Options include different communication interfaces, feedback types, accessories like cables, and software.
Galil DMC 42x0 Catalog
The DMC-42x0 is a high performance motion controller that can control 1-8 axes of motion. It features fast encoder inputs up to 22 MHz, servo update rates up to 16 kHz, and fast command processing of 40 microseconds. It includes features like PID control, I/O processing, and motion modes such as point-to-point positioning and interpolation. Options include analog and encoder feedback types, amplifiers, software, and cables.
Galil cat2xx0 catalog
The document describes the DMC-20x0 and DMC-22x0 Optima Series motion controllers from Galil. These are multi-axis motor controllers available with 1 to 8 axes that can be configured for stepper or servo motor control. They differ in their communication interface, with the DMC-20x0 using USB and the DMC-22x0 using Ethernet, but both include two RS232 serial ports. The controllers provide features such as PID compensation, programmable motion modes, and digital and analog I/O. Accessories include amplifier modules and interconnect boards.
Galil dmc12x0 17x0_18x0_catalog
The document describes several motion controller models from Galil: the DMC-12x0, DMC-17x0, and DMC-18x0 series. These controllers differ in their communication interface, with the DMC-12x0 using PC/104, DMC-17x0 using ISA, and DMC-18x0 using PCI. The controllers provide features such as PID compensation, programmable motion modes, and I/O capabilities. They are compatible with a variety of accessories that facilitate motor control and interconnectivity.
Delta ia plc-dvp_tp_c_en_20160922
The document describes Delta's DVP series of programmable logic controllers (PLCs). It provides an overview of Delta's various PLC models targeting different applications and industries, including standard, motion control, analog I/O, and network PLCs. Key features highlighted include processing speed, memory capacity, built-in interfaces and ports, instruction execution time, and support for industrial communication protocols and motion control functions like electronic cam. Application examples for robot arms and high-speed cutting machines are also mentioned.
Galil rio catalog
The RIO-47xxx Pocket PLC is a compact, cost-effective programmable logic controller with Ethernet and RS-232 connectivity. It has 16 analog inputs and outputs as well as up to 48 digital I/O. Programming is done via Galil's 2-letter command language or by converting relay ladder logic programs. Options include expanded memory, additional I/O, and interfacing for temperature sensors and position readers.
Galil dmc40x0 catalog
The Accelera DMC-40x0 is Galil's highest performance multi-axis motion controller, accepting encoder inputs up to 22 MHz and processing commands in as fast as 40 microseconds. It is available in 1 to 8 axis models and is configurable for stepper or servo motors. Standard features include PID control, I/O processing, and multi-axis coordinated motion capabilities like linear interpolation. The DMC-40x0 is designed for demanding motion control applications.
Wecon PLC Introduction 2017
The document summarizes the WECON LX Series PLC products released between 2012-2017. It provides details on the various PLC CPU models including the LX3V, LX3VP, LX3VE, and LX3VM. It also describes the expansion modules, BD modules, naming rules, features, and differences between the CPU series. Examples are given of the LX3V PLC being used in riveting machine and particle packing machine automation applications.
Computer conversions products_catalog
This document describes various products for converting between analog angular position signals and digital values, including synchro/resolver to digital converters, digital to synchro/resolver converters, encoders that provide both absolute and incremental position outputs, and related accessories like indicators and simulators. The products come in a variety of form factors from small modules to rack-mounted systems and support different resolutions, accuracy levels, and interface options.
High-performance PC-based multi-axis motion control cards
PBA Systems designs and manufactures motion control products including linear motor modules, voice coil modules, piezo stages, and large XYZ Theta stages. It aims for technological innovations to deliver high quality products and excellent customer service. The document provides specifications for the MaxMotion PA Series precision motion control card, which offers multi-axis servo and stepper control capabilities.
MaxMotion Motion Control Card - Digital Servo Control
Theontrol Card was de MaxMotion Precision Motion Csigned for high-performance PC-based (PCI-bus ) multi-axis motion control applications, which require up to 4 axes of analog servo control and up to 4 axes of pulse stepper control.
Solution on Handheld Signal Generator
This document discusses signal generators and TI's solutions for them. It provides an overview of signal generators, including what they are, their types and basic block diagrams. It then discusses TI's solutions for digital signal processing, data converters, RF upconversion, power management and other components used in signal generators. Finally, it provides selection guides for microcontrollers, DSPs, FPGAs and other relevant components from TI and other manufacturers.
Galil dmc1410 11_12_catalog
The DMC-1410, DMC-1411, DMC-1412, and DMC-1417 are single-axis motion control cards that provide advanced motion control features like PID compensation and program memory with a simple command language. They are available with ISA, PC/104, RS232, and PCI interfaces and can be configured for stepper or servo motor control. The controllers accept encoder feedback at up to 8MHz and offer digital and analog I/O for controlling motors and synchronizing with external events.
iAT2000 controller sales kit
iAT2000 Controller is part of iAT2000 System. It provide the controller solution in factory automation.
XMC4000 Brochure | Infineon Technologies
Find out more about Infineon on our Homepage: www.infineon.com/xmc
Find here all information about XMC4000 - Advanced Microcontrollers for Industrial Solutions - 32-bit Microcontroller Family based on ARM® Cortex(tm)-M4 from Infineon Technologies.
Applied motion products servo products datasheet
The document discusses servo drive products from Applied Motion, including three drive series (SV7, SVAC3, BLuAC5), common features across the drives, and control options. It provides details on specific drives and motors, including specifications, dimensions, torque curves, and available communications and I/O options. Electromate is listed as the seller and service provider.
Precision microcontrolleroverview
The document discusses several microcontroller products from Analog Devices that combine precision analog functions with ARM or 8051 microcontrollers. It summarizes key features of the ADuC702x ARM7 series that integrate 12-bit ADCs and DACs. It also briefly describes the ADuC7128/9 which add motor control features, and the ADuC703x series designed for automotive battery monitoring.
JVL QuickStep Integrated Stepper Motor MIS34 up to 9 Nm
The document describes an integrated stepper motor called the Quickstep that combines a stepper motor, encoder, driver, controller, and indexer into a single compact unit. Key features include integrated electronics and control logic, compact size, simple installation without external cabling, built-in PLC functionality, and serial interface standards like RS485 and CANopen. The Quickstep offers high resolution, precision control, flexible I/O options, and connectivity to external devices over common industrial fieldbus protocols.
Similar to Galil accelera accessories_Spec Sheet (20)
High-performance PC-based multi-axis motion control cards
High-performance PC-based multi-axis motion control cards
MaxMotion Motion Control Card - Digital Servo Control
MaxMotion Motion Control Card - Digital Servo Control
JVL QuickStep Integrated Stepper Motor MIS34 up to 9 Nm
JVL QuickStep Integrated Stepper Motor MIS34 up to 9 Nm
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Recently uploaded (20)
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Galil accelera accessories_Spec Sheet
- 1. ACCELERACONTROLLERS It’s all about Speed! Galil's ultra high-speed Accelera Series represents its 5th generation motion controllers.Pumped up with a powerful RISC processor,the Accelera series races along at much higher speeds than prior generation controllers. s Processes commands in 40 microseconds—10 times faster than prior generations s Accepts encoder inputs as fast as 22 MHz s Servo loop updates as high as 32 kHz All the Bells and Whistles are Standard s Available in 1- through 8-axis models s Available with Ethernet or PCI: DMC-40x0 Ethernet/RS232 DMC-18x6 PCI s Mix-and-Match steppers and servos s Handles virtually any mode of motion with ease s 2000 lines x 80 char.program memory;16000 element arrays;510 variables s Multitasking for running up to eight programs simultaneously s Optically isolated digital inputs and outputs s 8 uncommitted analog inputs with 12-bit or 16-bit ADC s Accepts two encoders for every servo axis s DMC-40x0 accepts 20–80VDC input and provides D-type connectors s Compact size: 1–4 axis:DMC-4040: 8.1" × 7.25" × 1.72" 5–8 axis:DMC-4080:11.5" × 7.25" × 1.72" Ultimate Power The DMC-40x0 is available with internal,multi-axis drives that minimize space,cost and wiring.Drive options are available for stepper and servo motors.The DMC-40x0 controller can also be easily connected to external drives of any power range. The AMP-195x0 2- and 4-axis packaged drive is available for the DMC-18x6 PCI controller. DMC-40x0 Integrated Drive Options DRIVE MODEL MOTORTYPE # OF AXES CURRENT VOLTAGE AMP-43020 Servo 2 7A cont,10A peak 20–80VDC AMP-43040 Servo 4 7A cont,10A peak 20–80VDC AMP-43140 Servo 4 1A max ±12–30VDC SDM-44040 Stepper 4 1.4A/phase 12–30VDC SDM-44140 Microstep 4 3A/phase 20–60VDC Accelera Series Sizzling Speed.Fully Loaded. ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By: