Thermodynamics
•Download as PPTX, PDF•
2 likes•1,356 views
This document discusses thermodynamic atmospheric energy systems produced by Futurewise Renewables. Thermodynamics creates heat by absorbing energy from the atmosphere using solar panels that work day and night in all weather. The system uses a refrigerant liquid and four-stage process to transfer heat from the panels to hot water. Benefits include providing 100% hot water needs without maintenance or secondary heat source while operating efficiently in all conditions.
Report
Share
Report
Share
Recommended
Limitations of first law of thermodynamics
The document discusses three limitations of the first law of thermodynamics. The first limitation is that the first law does not predict whether a process is possible. The second limitation is that the first law does not specify the direction of processes like heat flow. The third limitation is that the first law does not provide a sufficient condition for a process to occur or specify the percentage of energy conversion between forms.
Boundary layer and heat exchangers
The document summarizes three regimes of boiling - purely convective boiling where liquid slowly rises from the heated surface, nucleate boiling where vapor bubbles form and detach from nucleation sites on the surface, and film boiling where a vapor film covers the entire surface. It also discusses two types of condensation - film wise where a continuous liquid film forms, and drop wise where small liquid droplets form randomly. Finally, it introduces heat exchangers as devices that transfer heat between two fluids through a separating solid barrier.
Engineering Thermodynamics -Basic Concepts 2
This document provides an overview of basic thermodynamics concepts including:
- Systems, boundaries, surroundings, and the types of thermodynamic systems such as closed, open, isolated, and rigid.
- Thermodynamic states, processes, paths, and cycles along with examples of different processes.
- The basic definitions of heat, work, internal energy, and enthalpy along with the sign conventions.
- The zeroth law of thermodynamics regarding thermal equilibrium and temperature.
- The first law of thermodynamics regarding the relationship between heat, work, and changes in internal energy for closed and open systems.
wet bulb temperature presentation[HVAC]
⭐ Are you Core EPC engineer with Big Dreams & Want To Succeed In Life? ⭐
We the SCHOLENBERG INTERNATIONAL wants to help you achieve these dreams with our GLOBAL brand
JOIN NOW: https://sbgblv.com/
With 100+ Chapters on HVAC Basics, HVAC Oil & Gas Design Format, Heat Load Calculations, Psychometric Chart, P-H Diagram, Management Skills, Communication Skills - you can learn from the top most experts of EPC domain
When was the last time you faced with challenges that shook you to the core? Did you give up to the pressure? Or did you fight back and make it the biggest opportunity of your life. Do you know you can transform challenges into your biggest opportunities?
Ours is a story of grit and determination, a story from which you can learn how to leverage the challenges that life throws at you to create opportunities. A story of focus, belief, passion and motivation, Our story is the epitome of one where your self-belief creates opportunities in hard times, making you come out of any depression that you have.
If you are an MEP and EPC Professional looking for your purpose in life, success motivation in times of struggles and challenges, knowledge in time of confirmed resources then you must Join us: www.sbgblv.com
You can know more about us on our website - www.scholenberg.com
We, at Scholenberg International, passionately believes that a "well-defined" animation has power to re-shape the education. We are on a mission to find and showcase the best MEP Learning across the world .
What started as a simple company is now a fast-growing media platform that covers the most innovative MEP success stories with trainers from every conceivable background, including ISHRAE Excellence Award Winners, Ph.D. from IIT & Distinguished Professionals and consultant to Royal Court of Oman
Our goal is to unlock the potential of passionate MEP and EPC Engineers from rural and urban areas by inspiring them to overcome the setbacks they face in their career and helping them discover their true calling in life by means of our innovative approach towards life skills and Courses.
►Scholenberg on Facebook: https://www.facebook.com/scholenberg.3
►Scholenberg on Linkedin: https://www.linkedin.com/in/scholenberg-consulting-2567181b0/
►Scholenberg on Linkedin: https://www.linkedin.com/in/globalhvac/
Simple explanation: Working of HVAC Thermostat:
https://youtu.be/pxNEUGHeNac
Simplified: Working of Packaged Air-cooled AC Plant
https://youtu.be/rJnGwioN2nQ
Simplified: Working of Frost-Free Refrigerator
https://youtu.be/4Afk8M0v1Y8
Trailer-Animated Heat Load Calculations
https://youtu.be/lwfouMDxBvg
5-Mins Course on AHU
https://youtu.be/a1KEEzW31-U
4-Mins Course on Chillers
https://youtu.be/jKeHw2ICDmc
Thermodynamic
Here are the key steps to derive the expression for heat of reaction at constant pressure:
1) For a chemical reaction occurring at constant pressure, the enthalpy change (ΔH) is equal to the heat absorbed or released by the system (qP).
2) Enthalpy change (ΔH) is defined as the change in internal energy (ΔU) plus the product of pressure (P) and change in volume (ΔV).
ΔH = ΔU + PΔV
3) For a reaction at constant pressure, the volume change (ΔV) is small and pressure remains constant.
4) From the first law of thermodynamics, the change in internal energy (Δ
Thermodynamics - Heat and Temperature
Heat and temperature are different concepts. Heat is a form of energy measured in Joules, while temperature is a measure of the average kinetic energy of particles measured in Kelvin or Celsius. Objects can contain various forms of energy including kinetic energy from motion and potential energy from forces between particles. Thermal equilibrium occurs when objects in contact reach the same temperature after heat transfer. Specific heat capacity is the amount of energy required to change an object's temperature and depends on the material. Phase changes from solid to liquid or liquid to gas require latent heat and occur when particles gain enough energy to overcome attractive forces.
The laws of thermodynamics
This document discusses the connections between heat and work through the laws of thermodynamics. It introduces the three laws of thermodynamics:
1) The zeroth law establishes that thermal equilibrium is transitive.
2) The first law states that the change in internal energy of a system is equal to the heat added minus the work done.
3) The second law establishes that heat cannot spontaneously flow from a cold to a hot body, and limits the maximum possible efficiency of heat engines and refrigerators.
Heat engines and refrigerators/heat pumps are then discussed as examples of applying the laws of thermodynamics to transfer heat from hot to cold reservoirs to produce work or vice versa. Key concepts like
Heat Exchanger (Shell and tubes) by sujan kharel..
Hey! This is the best presentation about Heat exchanger device of shell and tubes type and there is also mentioned their defects and overcome method...
Recommended
Limitations of first law of thermodynamics
The document discusses three limitations of the first law of thermodynamics. The first limitation is that the first law does not predict whether a process is possible. The second limitation is that the first law does not specify the direction of processes like heat flow. The third limitation is that the first law does not provide a sufficient condition for a process to occur or specify the percentage of energy conversion between forms.
Boundary layer and heat exchangers
The document summarizes three regimes of boiling - purely convective boiling where liquid slowly rises from the heated surface, nucleate boiling where vapor bubbles form and detach from nucleation sites on the surface, and film boiling where a vapor film covers the entire surface. It also discusses two types of condensation - film wise where a continuous liquid film forms, and drop wise where small liquid droplets form randomly. Finally, it introduces heat exchangers as devices that transfer heat between two fluids through a separating solid barrier.
Engineering Thermodynamics -Basic Concepts 2
This document provides an overview of basic thermodynamics concepts including:
- Systems, boundaries, surroundings, and the types of thermodynamic systems such as closed, open, isolated, and rigid.
- Thermodynamic states, processes, paths, and cycles along with examples of different processes.
- The basic definitions of heat, work, internal energy, and enthalpy along with the sign conventions.
- The zeroth law of thermodynamics regarding thermal equilibrium and temperature.
- The first law of thermodynamics regarding the relationship between heat, work, and changes in internal energy for closed and open systems.
wet bulb temperature presentation[HVAC]
⭐ Are you Core EPC engineer with Big Dreams & Want To Succeed In Life? ⭐
We the SCHOLENBERG INTERNATIONAL wants to help you achieve these dreams with our GLOBAL brand
JOIN NOW: https://sbgblv.com/
With 100+ Chapters on HVAC Basics, HVAC Oil & Gas Design Format, Heat Load Calculations, Psychometric Chart, P-H Diagram, Management Skills, Communication Skills - you can learn from the top most experts of EPC domain
When was the last time you faced with challenges that shook you to the core? Did you give up to the pressure? Or did you fight back and make it the biggest opportunity of your life. Do you know you can transform challenges into your biggest opportunities?
Ours is a story of grit and determination, a story from which you can learn how to leverage the challenges that life throws at you to create opportunities. A story of focus, belief, passion and motivation, Our story is the epitome of one where your self-belief creates opportunities in hard times, making you come out of any depression that you have.
If you are an MEP and EPC Professional looking for your purpose in life, success motivation in times of struggles and challenges, knowledge in time of confirmed resources then you must Join us: www.sbgblv.com
You can know more about us on our website - www.scholenberg.com
We, at Scholenberg International, passionately believes that a "well-defined" animation has power to re-shape the education. We are on a mission to find and showcase the best MEP Learning across the world .
What started as a simple company is now a fast-growing media platform that covers the most innovative MEP success stories with trainers from every conceivable background, including ISHRAE Excellence Award Winners, Ph.D. from IIT & Distinguished Professionals and consultant to Royal Court of Oman
Our goal is to unlock the potential of passionate MEP and EPC Engineers from rural and urban areas by inspiring them to overcome the setbacks they face in their career and helping them discover their true calling in life by means of our innovative approach towards life skills and Courses.
►Scholenberg on Facebook: https://www.facebook.com/scholenberg.3
►Scholenberg on Linkedin: https://www.linkedin.com/in/scholenberg-consulting-2567181b0/
►Scholenberg on Linkedin: https://www.linkedin.com/in/globalhvac/
Simple explanation: Working of HVAC Thermostat:
https://youtu.be/pxNEUGHeNac
Simplified: Working of Packaged Air-cooled AC Plant
https://youtu.be/rJnGwioN2nQ
Simplified: Working of Frost-Free Refrigerator
https://youtu.be/4Afk8M0v1Y8
Trailer-Animated Heat Load Calculations
https://youtu.be/lwfouMDxBvg
5-Mins Course on AHU
https://youtu.be/a1KEEzW31-U
4-Mins Course on Chillers
https://youtu.be/jKeHw2ICDmc
Thermodynamic
Here are the key steps to derive the expression for heat of reaction at constant pressure:
1) For a chemical reaction occurring at constant pressure, the enthalpy change (ΔH) is equal to the heat absorbed or released by the system (qP).
2) Enthalpy change (ΔH) is defined as the change in internal energy (ΔU) plus the product of pressure (P) and change in volume (ΔV).
ΔH = ΔU + PΔV
3) For a reaction at constant pressure, the volume change (ΔV) is small and pressure remains constant.
4) From the first law of thermodynamics, the change in internal energy (Δ
Thermodynamics - Heat and Temperature
Heat and temperature are different concepts. Heat is a form of energy measured in Joules, while temperature is a measure of the average kinetic energy of particles measured in Kelvin or Celsius. Objects can contain various forms of energy including kinetic energy from motion and potential energy from forces between particles. Thermal equilibrium occurs when objects in contact reach the same temperature after heat transfer. Specific heat capacity is the amount of energy required to change an object's temperature and depends on the material. Phase changes from solid to liquid or liquid to gas require latent heat and occur when particles gain enough energy to overcome attractive forces.
The laws of thermodynamics
This document discusses the connections between heat and work through the laws of thermodynamics. It introduces the three laws of thermodynamics:
1) The zeroth law establishes that thermal equilibrium is transitive.
2) The first law states that the change in internal energy of a system is equal to the heat added minus the work done.
3) The second law establishes that heat cannot spontaneously flow from a cold to a hot body, and limits the maximum possible efficiency of heat engines and refrigerators.
Heat engines and refrigerators/heat pumps are then discussed as examples of applying the laws of thermodynamics to transfer heat from hot to cold reservoirs to produce work or vice versa. Key concepts like
Heat Exchanger (Shell and tubes) by sujan kharel..
Hey! This is the best presentation about Heat exchanger device of shell and tubes type and there is also mentioned their defects and overcome method...
Presentation
Gourav Tiwari's presentation introduces psychrometry, the science of air-water vapor mixtures. It discusses key psychrometric properties like dry bulb temperature, wet bulb temperature, and dew point. It also covers psychrometric processes such as sensible heating and cooling, which change temperature along constant humidity lines; and dehumidification and humidification, which change moisture content. The presentation aims to explain these concepts using a psychrometric chart to illustrate different psychrometric processes and how they affect air temperature and moisture levels.
Liquification of gases
There are three main methods for liquefying gases:
1. Applying sufficient pressure to gases below their critical temperature to cause liquefaction. For example, liquefying carbon dioxide which has a critical temperature of 304K.
2. Making gases do work against an external force, such as in a steam engine, causing them to lose energy and lower in temperature.
3. Forcing gases through a nozzle or porous plug, making them do work against their own internal forces and lose energy, potentially reaching liquefaction after multiple repetitions of expanding through restrictions.
Heat pipes
Heat pipes transfer heat using an evaporation-condensation cycle. They work by evaporating a working fluid in a heated region (evaporator) which transfers heat, then the vapor travels inside the heat pipe to a cooled region (condenser) where it condenses, releasing the latent heat. The condensed liquid then returns to the evaporator via a capillary wick structure. Heat pipes have several advantages like passive operation, long life, flexibility and minimum maintenance, making them useful for applications like electronics cooling and energy recovery.
Introduction of Fluid Mechanics
this unit describes in detail about the Fluid Flow and it have a some example to emphasize the understanding of the entire module.
Condensation
This document discusses different types of condensation and heat transfer during condensation. It describes two types of condensation - dropwise condensation and film condensation. Film condensation can occur as either laminar or turbulent flow on a vertical surface. Equations are provided for calculating the heat transfer coefficient during laminar and turbulent film condensation on a vertical plate based on factors like fluid properties, film thickness, and surface area. The heat transfer rate decreases with increasing plate height as the film thickness and thermal resistance increase along the height.
BOILER DRAUGHT
Boiler draught refers to the pressure difference between the air inside a boiler furnace and the outside air, which causes the flow of air and flue gases through the boiler. This pressure difference is necessary for proper combustion of fuel and removal of flue gases. Draught can be produced naturally through the use of a chimney, or artificially through mechanical fans or steam jets. Forced draught uses a fan before the furnace to push air and gases through, while induced draught uses a fan at the chimney to pull gases through. Balanced draught combines the two. Mechanical draught allows better control of the pressure but has higher costs than natural or steam jet draught.
Geothermal energy
Geothermal energy comes from the natural heat of the Earth. It can be used directly by sending water into wells to be heated and then extracting the heat for uses like heating homes. There are also different types of geothermal power plants that can generate electricity through various processes involving steam or hot water from underground reservoirs. Geothermal energy has advantages over fossil fuels as it produces less emissions and can operate continuously while being a renewable source. Some countries have begun harnessing geothermal energy significantly for electricity production.
basics of thermodynamics- chemical engg.
its the ppt about giving basic information about thermodynamic which is part of the chemical engineering. it includes all the laws and other features related thermodynamics like entropy-temperature and pressure and other things
Fouling effects on boiler
Fouling, in technical language, it is the general term of unwanted material which is accumulating on surfaces, such as inside pipes, machines or heat exchanger.
Second law of thermodynamics
The document discusses the limitations of the first law of thermodynamics and introduces the second law of thermodynamics. It explains that the first law does not account for the direction of energy transfer, while the second law states that heat will only flow spontaneously from hotter to colder bodies and not vice versa. The second law also establishes that it is impossible to convert all heat into work in a thermodynamic cycle. Various applications of the first and second laws are described, including heat engines, refrigerators, heat pumps, and the impossibility of building a perpetual motion machine of the second kind.
Boiling & condensation
This document discusses boiling and condensation processes. It defines boiling as the transition of a liquid to vapor when heated to the saturation temperature. There are different types of boiling including pool boiling, where fluid motion is from natural convection, and flow boiling, where an external pump forces liquid motion.
The boiling curve is presented, outlining the different boiling regimes of natural convection, nucleate boiling, transition boiling, and film boiling that occur as heat flux increases. Correlations are provided for calculating heat transfer in the nucleate and film boiling regimes.
Condensation occurs when vapor temperature decreases below saturation. It can be dropwise or film condensation, with dropwise having higher heat transfer. The rate of heat transfer
Module (1.2) psychometrics-air parameters-hvac_by ss-eng. juma
Module (1.2) psychometrics-air parameters-hvac_by ss-eng. jumaJuma Yousef J. Saleh جمعة يوسف جمعة صالح
1. The document discusses psychrometrics and the thermodynamic properties of moist air. It explains key concepts like dry bulb temperature, wet bulb temperature, humidity ratio, relative humidity, dew point temperature, and the use of a psychrometer and psychrometric chart to analyze air conditioning processes.
2. Various air conditioning processes are summarized that involve changes in temperature and moisture content of air, including sensible cooling/heating, cooling and dehumidification, heating and humidification, cooling and humidification, and heating and dehumidification.
3. Other topics covered include mixing of air streams, the use of air washers to condition air, and how the mean temperature of water droplets determines the direction ofHeat transfer
Heat transfer occurs in three main ways:
1. Conduction, which is the transfer of heat between substances in direct contact through the vibration of particles.
2. Convection, which involves the transfer of heat by the movement of fluids like liquids and gases. Convection currents in the atmosphere transfer heat globally.
3. Radiation, which allows heat transfer through electromagnetic wave energy even in a vacuum. Radiation can be absorbed, reflected, transmitted, or scattered as it interacts with objects.
2nd law of thermodynamic
this is my presentation about 2nd law of thermodynamic. this is part of engineering thermodynamic in mechanical engineering. here discussed about heat transfer, heat engines, thermal efficiency of heat pumps and refrigerator and its equation for perfect work done with best figure and table wise discription, entropy and change in entropy, isentropic process for turbines and compressor and many more.
heat transfer
1) Heat exchangers are devices that transfer thermal energy between two or more fluids without mixing the fluids. They are commonly used in industries like petroleum refining, power plants, and HVAC systems.
2) Heat exchangers can be classified based on fluid flow patterns (parallel, countercurrent, crossflow) and heat transfer methods. Countercurrent flow is the most efficient as it produces the highest temperature changes in each fluid.
3) Common types of heat exchangers include tubular (shell and tube, concentric tube), plate (flat plate, spiral plate), and extended surface heat exchangers. Tubular heat exchangers involve one fluid flowing inside tubes while another flows
Thermodynamics
This document provides definitions and concepts related to thermodynamics. It discusses microscopic and macroscopic approaches, defines key terms like system, surroundings, boundary, and state. It classifies thermodynamic systems and properties, and describes concepts like equilibrium, path, process, and cycle. It defines different forms of energy specifically work and heat. It also gives the first law of thermodynamics and discusses other thermodynamic processes.
Applied thermodynamics(lecture 1)
This document provides information about a thermodynamics course including:
- Recommended textbooks for the course
- Policies such as prohibiting cell phone disturbances and not accepting late assignments
- How to access the course outline and materials online
- An introduction to concepts in thermodynamics including systems, properties, processes, and the first law of thermodynamics.
Log mean temperature difference
This document discusses different types of heat exchangers, including tube and shell and plate heat exchangers. It describes parallel flow, counter flow, and cross flow configurations. Counter flow heat exchangers are most efficient due to having the highest log mean temperature difference. The effectiveness-NTU method is introduced to calculate heat transfer rate when inlet/outlet temperatures are unknown. Heat exchangers are also classified as regenerative or non-regenerative based on whether the same fluid acts as both the heated and cooled fluid.
Refrigeration & air conditioning
This document provides an overview of refrigeration and air conditioning. It discusses the principles of refrigeration, including refrigerants and their properties, the coefficient of performance, and vapor compression and vapor absorption refrigeration systems. It also discusses air conditioning principles, classifications of air conditioning systems, and common types like window units and split systems. The key components and processes of refrigeration and air conditioning systems are explained.
Lecture 15 first law of thermodynamics
1) The document discusses the first law of thermodynamics and key concepts like internal energy, state variables, work, and heat transfer.
2) Internal energy depends on molecular kinetic and potential energy and can vary for different systems like monoatomic gases, diatomic gases, and monoatomic solids.
3) Work is defined as the area under a pressure-volume curve and can cause a change in the internal energy of a system according to the first law of thermodynamics.
4) For a cyclic process returning a system to its initial state, the total work done and heat transferred can be used to determine if energy was absorbed or released over the full cycle.
Thermodynamic empower energy
Thermodynamic systems provide hot water using heat from the atmosphere through a process involving a refrigerant liquid absorbing heat from panels and transferring it to hot water via a heat exchanger. The systems can provide 100% of hot water needs year-round without sunlight by passing the refrigerant through solar plates to absorb heat, increasing its temperature until it vaporizes and is further heated by a compressor before transferring heat to water. Benefits include continuous hot water without maintenance in all weather down to -15 degrees.
1. basic solar thermal training v3 robert cooley
This document provides an overview of Module 1 of an installer training course on basic solar thermal technologies. The module covers introductions to solar hot water, the components of SHW systems including different collector types, and types of SHW systems. It also outlines the steps to becoming a HelioPartner installer, including training, certification, insurance, and successful system installation. The goal is to train installers to effectively promote, install, and support Heliodyne solar hot water products.
More Related Content
What's hot
Presentation
Gourav Tiwari's presentation introduces psychrometry, the science of air-water vapor mixtures. It discusses key psychrometric properties like dry bulb temperature, wet bulb temperature, and dew point. It also covers psychrometric processes such as sensible heating and cooling, which change temperature along constant humidity lines; and dehumidification and humidification, which change moisture content. The presentation aims to explain these concepts using a psychrometric chart to illustrate different psychrometric processes and how they affect air temperature and moisture levels.
Liquification of gases
There are three main methods for liquefying gases:
1. Applying sufficient pressure to gases below their critical temperature to cause liquefaction. For example, liquefying carbon dioxide which has a critical temperature of 304K.
2. Making gases do work against an external force, such as in a steam engine, causing them to lose energy and lower in temperature.
3. Forcing gases through a nozzle or porous plug, making them do work against their own internal forces and lose energy, potentially reaching liquefaction after multiple repetitions of expanding through restrictions.
Heat pipes
Heat pipes transfer heat using an evaporation-condensation cycle. They work by evaporating a working fluid in a heated region (evaporator) which transfers heat, then the vapor travels inside the heat pipe to a cooled region (condenser) where it condenses, releasing the latent heat. The condensed liquid then returns to the evaporator via a capillary wick structure. Heat pipes have several advantages like passive operation, long life, flexibility and minimum maintenance, making them useful for applications like electronics cooling and energy recovery.
Introduction of Fluid Mechanics
this unit describes in detail about the Fluid Flow and it have a some example to emphasize the understanding of the entire module.
Condensation
This document discusses different types of condensation and heat transfer during condensation. It describes two types of condensation - dropwise condensation and film condensation. Film condensation can occur as either laminar or turbulent flow on a vertical surface. Equations are provided for calculating the heat transfer coefficient during laminar and turbulent film condensation on a vertical plate based on factors like fluid properties, film thickness, and surface area. The heat transfer rate decreases with increasing plate height as the film thickness and thermal resistance increase along the height.
BOILER DRAUGHT
Boiler draught refers to the pressure difference between the air inside a boiler furnace and the outside air, which causes the flow of air and flue gases through the boiler. This pressure difference is necessary for proper combustion of fuel and removal of flue gases. Draught can be produced naturally through the use of a chimney, or artificially through mechanical fans or steam jets. Forced draught uses a fan before the furnace to push air and gases through, while induced draught uses a fan at the chimney to pull gases through. Balanced draught combines the two. Mechanical draught allows better control of the pressure but has higher costs than natural or steam jet draught.
Geothermal energy
Geothermal energy comes from the natural heat of the Earth. It can be used directly by sending water into wells to be heated and then extracting the heat for uses like heating homes. There are also different types of geothermal power plants that can generate electricity through various processes involving steam or hot water from underground reservoirs. Geothermal energy has advantages over fossil fuels as it produces less emissions and can operate continuously while being a renewable source. Some countries have begun harnessing geothermal energy significantly for electricity production.
basics of thermodynamics- chemical engg.
its the ppt about giving basic information about thermodynamic which is part of the chemical engineering. it includes all the laws and other features related thermodynamics like entropy-temperature and pressure and other things
Fouling effects on boiler
Fouling, in technical language, it is the general term of unwanted material which is accumulating on surfaces, such as inside pipes, machines or heat exchanger.
Second law of thermodynamics
The document discusses the limitations of the first law of thermodynamics and introduces the second law of thermodynamics. It explains that the first law does not account for the direction of energy transfer, while the second law states that heat will only flow spontaneously from hotter to colder bodies and not vice versa. The second law also establishes that it is impossible to convert all heat into work in a thermodynamic cycle. Various applications of the first and second laws are described, including heat engines, refrigerators, heat pumps, and the impossibility of building a perpetual motion machine of the second kind.
Boiling & condensation
This document discusses boiling and condensation processes. It defines boiling as the transition of a liquid to vapor when heated to the saturation temperature. There are different types of boiling including pool boiling, where fluid motion is from natural convection, and flow boiling, where an external pump forces liquid motion.
The boiling curve is presented, outlining the different boiling regimes of natural convection, nucleate boiling, transition boiling, and film boiling that occur as heat flux increases. Correlations are provided for calculating heat transfer in the nucleate and film boiling regimes.
Condensation occurs when vapor temperature decreases below saturation. It can be dropwise or film condensation, with dropwise having higher heat transfer. The rate of heat transfer
Module (1.2) psychometrics-air parameters-hvac_by ss-eng. juma
Module (1.2) psychometrics-air parameters-hvac_by ss-eng. jumaJuma Yousef J. Saleh جمعة يوسف جمعة صالح
1. The document discusses psychrometrics and the thermodynamic properties of moist air. It explains key concepts like dry bulb temperature, wet bulb temperature, humidity ratio, relative humidity, dew point temperature, and the use of a psychrometer and psychrometric chart to analyze air conditioning processes.
2. Various air conditioning processes are summarized that involve changes in temperature and moisture content of air, including sensible cooling/heating, cooling and dehumidification, heating and humidification, cooling and humidification, and heating and dehumidification.
3. Other topics covered include mixing of air streams, the use of air washers to condition air, and how the mean temperature of water droplets determines the direction ofHeat transfer
Heat transfer occurs in three main ways:
1. Conduction, which is the transfer of heat between substances in direct contact through the vibration of particles.
2. Convection, which involves the transfer of heat by the movement of fluids like liquids and gases. Convection currents in the atmosphere transfer heat globally.
3. Radiation, which allows heat transfer through electromagnetic wave energy even in a vacuum. Radiation can be absorbed, reflected, transmitted, or scattered as it interacts with objects.
2nd law of thermodynamic
this is my presentation about 2nd law of thermodynamic. this is part of engineering thermodynamic in mechanical engineering. here discussed about heat transfer, heat engines, thermal efficiency of heat pumps and refrigerator and its equation for perfect work done with best figure and table wise discription, entropy and change in entropy, isentropic process for turbines and compressor and many more.
heat transfer
1) Heat exchangers are devices that transfer thermal energy between two or more fluids without mixing the fluids. They are commonly used in industries like petroleum refining, power plants, and HVAC systems.
2) Heat exchangers can be classified based on fluid flow patterns (parallel, countercurrent, crossflow) and heat transfer methods. Countercurrent flow is the most efficient as it produces the highest temperature changes in each fluid.
3) Common types of heat exchangers include tubular (shell and tube, concentric tube), plate (flat plate, spiral plate), and extended surface heat exchangers. Tubular heat exchangers involve one fluid flowing inside tubes while another flows
Thermodynamics
This document provides definitions and concepts related to thermodynamics. It discusses microscopic and macroscopic approaches, defines key terms like system, surroundings, boundary, and state. It classifies thermodynamic systems and properties, and describes concepts like equilibrium, path, process, and cycle. It defines different forms of energy specifically work and heat. It also gives the first law of thermodynamics and discusses other thermodynamic processes.
Applied thermodynamics(lecture 1)
This document provides information about a thermodynamics course including:
- Recommended textbooks for the course
- Policies such as prohibiting cell phone disturbances and not accepting late assignments
- How to access the course outline and materials online
- An introduction to concepts in thermodynamics including systems, properties, processes, and the first law of thermodynamics.
Log mean temperature difference
This document discusses different types of heat exchangers, including tube and shell and plate heat exchangers. It describes parallel flow, counter flow, and cross flow configurations. Counter flow heat exchangers are most efficient due to having the highest log mean temperature difference. The effectiveness-NTU method is introduced to calculate heat transfer rate when inlet/outlet temperatures are unknown. Heat exchangers are also classified as regenerative or non-regenerative based on whether the same fluid acts as both the heated and cooled fluid.
Refrigeration & air conditioning
This document provides an overview of refrigeration and air conditioning. It discusses the principles of refrigeration, including refrigerants and their properties, the coefficient of performance, and vapor compression and vapor absorption refrigeration systems. It also discusses air conditioning principles, classifications of air conditioning systems, and common types like window units and split systems. The key components and processes of refrigeration and air conditioning systems are explained.
Lecture 15 first law of thermodynamics
1) The document discusses the first law of thermodynamics and key concepts like internal energy, state variables, work, and heat transfer.
2) Internal energy depends on molecular kinetic and potential energy and can vary for different systems like monoatomic gases, diatomic gases, and monoatomic solids.
3) Work is defined as the area under a pressure-volume curve and can cause a change in the internal energy of a system according to the first law of thermodynamics.
4) For a cyclic process returning a system to its initial state, the total work done and heat transferred can be used to determine if energy was absorbed or released over the full cycle.
What's hot (20)
Module (1.2) psychometrics-air parameters-hvac_by ss-eng. juma
Module (1.2) psychometrics-air parameters-hvac_by ss-eng. juma
Similar to Thermodynamics
Thermodynamic empower energy
Thermodynamic systems provide hot water using heat from the atmosphere through a process involving a refrigerant liquid absorbing heat from panels and transferring it to hot water via a heat exchanger. The systems can provide 100% of hot water needs year-round without sunlight by passing the refrigerant through solar plates to absorb heat, increasing its temperature until it vaporizes and is further heated by a compressor before transferring heat to water. Benefits include continuous hot water without maintenance in all weather down to -15 degrees.
1. basic solar thermal training v3 robert cooley
This document provides an overview of Module 1 of an installer training course on basic solar thermal technologies. The module covers introductions to solar hot water, the components of SHW systems including different collector types, and types of SHW systems. It also outlines the steps to becoming a HelioPartner installer, including training, certification, insurance, and successful system installation. The goal is to train installers to effectively promote, install, and support Heliodyne solar hot water products.
March5 2009-workshop-slides
The workshop provided information on home heating technologies including solar thermal and geothermal systems. For solar thermal, it discussed the differences between flat plate and evacuated tube collectors and provided case studies showing returns on investment of 16.7-23.7% for domestic hot water and pool heating systems. For geothermal, it outlined the types of systems and discussed installation considerations and costs, noting that while upfront costs are higher, operating costs are reduced by 66% compared to gas systems. A case study compared typical system costs to a geothermal heat pump system.
Technology at work in your facility hvac pre-cooling
This document discusses an evaporative cooling system that uses water spraying and evaporation to cool hot outside air before it reaches condenser coils. On 100 degree days, this system can lower the air temperature to 79 degrees, reducing energy usage. Case studies show energy savings ranging from 15-30% depending on cooling degree days. In addition to energy savings, the system reduces maintenance needs, increases equipment lifespan, and lowers water usage compared to traditional energy production.
The Reliable Renewable - Geothermal HVAC
The reliable renewable when it comes to heating and cooling your home is geothermal. This presentation explores the benefits and costs of geothermal heating and cooling systems.
Basics Overview of Vapour Absorption Machine.pptx
The document provides an overview of refrigeration systems, including:
1) It describes the basic principles and types of refrigeration systems, including vapor compression, absorption, and natural/mechanical refrigeration.
2) It explains common refrigerants used in primary and secondary systems, and discusses factors like thermal conductivity, viscosity, and thermodynamic properties that influence refrigerant selection.
3) It provides an overview of the main components in a typical vapor compression refrigeration system, including the evaporator, compressor, condenser, and expansion valve.
Pearson Star&Alfa District Cooling And Desalination
Couplin up utilities so reduce overall cost and carbon footprint sounds dificult but with NeatDesal it is very simple.
TEI_GEM.PDF
The document discusses Thermal Energy International Inc. and their GEM Condensate Return System product. Some key points:
- The GEM system features GEM steam traps which are more reliable and efficient than traditional mechanical steam traps due to having no moving parts.
- GEM traps come with a 10 year performance guarantee and can typically outlast the systems they serve. They provide benefits like increased production, permanent energy savings of 10-30%, and ultimate reliability.
- Thermal Energy International is an innovative technology company that provides custom energy and emissions reduction solutions using products like their GEM condensate return system and steam traps.
Hera Eenergy All Product
Global warming is being caused by human activities that increase greenhouse gases. The Earth is warming, especially over the last 50 years, causing changes to precipitation patterns and rising sea levels. While technologies exist now to address global warming, individuals also need to take action to protect the environment. Sustainable technologies like solar energy can provide clean power without maintenance costs while saving money over time.
Efficient refrigeration systems and heatpumps pearson
The document discusses key factors to consider for efficient refrigeration system design. It recommends focusing on temperature lift across evaporators and condensers, part-load operation, auxiliary power consumption, and choice of refrigerant. Specific areas of inefficiency or "muda" include application of the system and maintenance after installation. The document emphasizes taking a holistic view of efficiency that considers capital, operating, and maintenance costs over the lifecycle of the system. Designers should aim to minimize waste and maximize reuse of waste heat.
Renewable Energy Based Peltier Refrigeration System
All about Peltier plate refrigerator for project with using renewable energy syatem, like windmill, hand wheel & solar panel
Net Zero heating system. 3700 sq ft two story with full basement
This document discusses steps to make a building net zero and maximize LEED points through energy efficiency improvements. It outlines analyzing shell efficiency, HVAC systems, appliances, lighting and solar to determine energy needs. Integrating these steps can achieve many LEED points through energy reduction and on-site renewable energy. Specific upgrades discussed include high-efficiency insulation, windows, fans, lighting, heat pumps and a standardized solar system.
Untitled
Energy Savings UK introduces Hydromx, a new heating fluid that uses nanoparticle technology to increase heating efficiency by 37% on average. Hydromx transfers heat more effectively than water by increasing the boiling point and decreasing the freezing point. This allows it to heat rooms faster while reducing energy costs by 20-35%. Hydromx has over 12,000 installers worldwide and is used by major international companies due to its proven ability to improve heating system performance and lower energy bills.
DJO Eco Management Solutions Presentation
The document is a presentation overview from DJO Eco Limited about renewable energy solutions. It summarizes several products including a battery storage system, solar panels integrated into rooftops, an energy management system, a heat recovery system, hot water boilers, LED lighting, and electrical contracting services. The presentation provides details on the benefits and specifications of each product, such as reducing energy bills by up to 40% and increasing solar panel warranties.
2015 Catalog
Radiant Supply Group offers in-floor thermal storage heating systems that take advantage of utility companies' reduced off-peak electric rates. These systems store heat in sand above buried heating cables during off-peak hours. This allows heating to continue into on-peak hours from stored thermal energy. Examples saw savings of over 70% on heating costs. Proper installation techniques like increased cable wattage and perimeter insulation are required for effective thermal storage.
Solar Thermal Applications And Technologies Gsespl
The document discusses solar thermal technologies for providing clean energy as an alternative to hydrocarbon sources. It describes technologies such as concentrating solar radiation to generate steam for power generation and various applications. These include cooking, pasteurizing water, space heating, and industrial process heating. The systems offer advantages of being pollution-free, requiring no transmission losses, and having low operating costs.
Gas Networks Ireland Technical Presentations- Part L
In case you missed it !! NuTech gave a presentation at the recent Gas Networks Ireland (GNI) Conference for BER Assessors. The presentation deals mainly with how the NuTech Solar Enhanced Heating and Hot Water system can be used together with a simple and reliable gas boiler system can be used to comply with Part L & achieve an A Rated House. The presentation also gives information on the NuTech Solar Enhanced Ventilation and Hot Water system can be used to satisfy Part L.
Sunamp Limited
This document discusses Sunamp, a company that produces thermal energy storage systems called Heat Batteries. Some key points:
- Sunamp Heat Batteries can store heat from various renewable energy sources or the grid to provide space heating and hot water on demand. This time-shifts energy use.
- Their systems are more energy efficient and compact than traditional hot water tanks, and can last over 10 years with no performance degradation.
- Sunamp sees opportunities in residential and commercial HVAC applications, electric vehicles, and integrating intermittent renewable energy sources onto the grid.
- The company has raised over £10 million to date and is now raising £7 million more to scale manufacturing and sales globally and develop
Ocean themal energy conversion
This power point presentation deals ocean energy conversion technique. This tells how ocean energy convert in to useful energy i.e. in accessible form.
General Sales Brochure 2016
EcoCooling offers evaporative cooling systems that can save up to 90% on cooling costs compared to air conditioning. Their product ranges include internal compact units and external modular units that can be configured in various ways. The internal ECT range is designed for flexibility inside buildings, with options for ducted or raised floor installation. The external ECP range is proven for industrial use, with over 3,500 global installations. Both product lines use evaporative cooling principles and advanced controls to provide energy-efficient, fresh air cooling for various commercial and industrial spaces.
Similar to Thermodynamics (20)
Technology at work in your facility hvac pre-cooling
Technology at work in your facility hvac pre-cooling
Pearson Star&Alfa District Cooling And Desalination
Pearson Star&Alfa District Cooling And Desalination
Efficient refrigeration systems and heatpumps pearson
Efficient refrigeration systems and heatpumps pearson
Renewable Energy Based Peltier Refrigeration System
Renewable Energy Based Peltier Refrigeration System
Net Zero heating system. 3700 sq ft two story with full basement
Net Zero heating system. 3700 sq ft two story with full basement
Solar Thermal Applications And Technologies Gsespl
Solar Thermal Applications And Technologies Gsespl
Gas Networks Ireland Technical Presentations- Part L
Gas Networks Ireland Technical Presentations- Part L
Recently uploaded
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Recently uploaded (20)
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Thermodynamics
- 1. the future is thermodynamics Thermodynamic Atmospheric Energy Systems By Futurewise Renewables 01202 826000 info@futurewise-renewables.co.uk
- 2. the future is thermodynamics What is Thermodynamics? Thermodynamic creates heat from absorbing energy from the atmosphere The panels absorb heat from the sun, rain, wind and snow 24/7 365 days a year providing 100% of your hot water needs 01202 826000 info@futurewise-renewables.co.uk
- 3. the future is thermodynamics How Does it Work? A refrigerant liquid is passed through a solar plate collector where it absorbs heat from the atmosphere which is then transferred to a hot water system 01202 826000 info@futurewise-renewables.co.uk
- 4. the future is thermodynamics The First Stage of the Process The refrigerant liquid passes through the panels where it absorbs the heat from the surrounding air, as the temperature in the refrigerant liquid increases it vaporises into a gas. 01202 826000 info@futurewise-renewables.co.uk
- 5. the future is thermodynamics The Second Stage of the Process This gas is heated further by a compressor 01202 826000 info@futurewise-renewables.co.uk
- 6. the future is thermodynamics The Third Stage of the Process The compressed gas is then forced through the Thermodynamic block and into the cylinder were the heat is transferred into the water via the heat exchanger 01202 826000 info@futurewise-renewables.co.uk
- 7. the future is thermodynamics The Final Stage of the Process As the gas cools it reverts back to a liquid and returns to the panel were the process is repeated 01202 826000 info@futurewise-renewables.co.uk
- 8. the future is thermodynamics System Benefits • Heats water through the day and night all year round • Operates in all weathers down to -15 • Has a COP of up to 1-7 • Provides 100% of hot water requirements • Virtually no maintenance • Can be used for domestic hot water, swimming pool, large volume water heating and central heating • Fast payback period • New build or retro fit 01202 826000 info@futurewise-renewables.co.uk
- 9. the future is thermodynamics General Questions and Answers General questions and answers Thermodynamic Solar Thermo Will it provide 100% of your hot water needs YES NO Can the panels be fitted anywhere YES NO Does it take up much space NO YES Does it require a secondary heat source NO YES Does it work 24/7 YES NO Does it works at night YES NO Does it work in all weathers YES NO Are they light weight panels YES NO What is the maximum Cop 7 3 Do they require a lot of maintenance NO YES Are they noisy in operation NO NO Are they reliant on the Sun NO YES Do you need scaffolding NO YES
- 10. the future is thermodynamics TDS 200 Complete System The easy to install TDS 200 System comprises of: Solar Panel Hot Water Cylinder Thermodynamic Group A134a Gas Pre-charged Magnesium Anode Split Valves Quick Fixation Kit Safety Valve Pressure Reducing Valve 01202 826000 info@futurewise-renewables.co.uk
- 11. the future is thermodynamics 01202 826000 info@futurewise-renewables.co.uk Accreditation Futurewise Renewables are a company providing new energy efficient innovative products for the domestic and Commercial Markets WRAS are the Water regulations Advisory Scheme, have certified the Thermodynamic system to be used in the UK. Solar Keymark is the main quality label for Solar Thermal in Europe. This allows your customer to qualify for the RHI and RHPP.
Editor's Notes
- alves
- alves