Pearson Star&Alfa District Cooling And Desalination
1.
2. DISTRICT COOLING & DESALINATION USING HEATPUMPS & M.E.D. David Pearson Director of Innovation Star Refrigeration Imtiaz Khan Regional Manager, Energy (Power, Oil & Gas) Alfa Laval Middle East Ltd
12. Kansai Electric (KEPCO), Nuclear Power Plant, Takahama, Japan; 2x TVC-4-1000; 2x 1,000 m3/day, 2002
13. High quality water for Prawn production National Prawn, Saudi Arabia MED-5-425 - 475 m 3 /day 2002
14. Binzagr CO-RO produce soft drinks and beverages using freshwater distillated from underground water, which has a higher salinity chemical complexity than the Red Sea Binzagr CoRo, Jeddah, VVC-350 & VVC-125: 475 m 3 /day
19. Plate type Tubular Performance % 1 2 125 100 75 Time Performance through time Alfa Laval Plate type evaporators can be cleaned 100% Tubular evaporators gradually decrease performance because of “irreversible” scaling/fouling CIP cleaning can remove alkaline soft scaling, and hard scaling can also be removed 100% in a PHE type desalination unit. Why use Plate MED?
26. District Cooling and Desalination NeatDesal Proven Turning waste heat from cooling into water.
Editor's Notes
An extensive desalination History
Multi Effect Tube unit Design Capability and Plate design technology => MEP UNIT ! Core product in desalination
Updated map
Project “Iskenderun Bay” Turkey Multi-Effect Plate, Thermo-Vapour Compression, 3 x TVC-4-1750 Powered by 15 bar bleed steam from the power plant turbines Boiler make-up water, flue gas cleaning and other process requirements
Location: Jeddah Saudi Arabia Customer: Binzagr CO-RO New industrial Zone Jeddah Saudi Arabia Brief description: The customer is an industrial plant producing soft drinks and beverages. The systems installed are two Mechanical Vacuum Vapour Compression units desalinating underground water which has a higher salinity chemical complexity than the Red Sea. The produced water is the basis for blending of concentrates in the preparation and bottling of the final product. Main data: Water desalination Capacity: 475 M³/day Raw water source: High salinity underground water Type of desalination units: Vacuum Vapour Compression Number & size of units: 1 x 350 M³/day and 1 x 125 M³/day Specific energy consumption: 11 kWh/m³ of product Heat transfer surface material: Titanium Gr.
Location: Jeddah Saudi Arabia Customer: Binzagr CO-RO New industrial Zone Jeddah Saudi Arabia Brief description: The customer is an industrial plant producing soft drinks and beverages. The systems installed are two Mechanical Vacuum Vapour Compression units desalinating underground water which has a higher salinity chemical complexity than the Red Sea. The produced water is the basis for blending of concentrates in the preparation and bottling of the final product. Main data: Water desalination Capacity: 475 M³/day Raw water source: High salinity underground water Type of desalination units: Vacuum Vapour Compression Number & size of units: 1 x 350 M³/day and 1 x 125 M³/day Specific energy consumption: 11 kWh/m³ of product Heat transfer surface material: Titanium Grade 1. Note: Vessel and compressor is located on ground floor While pumps are located in below basement.