Friul Filiere S.p.a. operates in the field of
plastic materials at the international level
since more than 40 years. Known as the only
Italian Company able to supply complete lines
and toolings for the extrusion of all
thermoplastic materials, accompanies
customers throughout the development of
personalized projects, from the initial request
to the delivery of a “Turnkey Project”.
This document provides information about pipes and fittings produced by aquatechnik, including multi-calor pipes, multi-eco pipes, and polipert pipes. It describes the materials and layers that make up each type of pipe, their specifications, intended uses, dimensions, and certifications. The document also discusses advantages of the pipe systems, installation guidelines, and competence and responsibility of the manufacturer.
Gumiimpex was founded in 1970 as an independent tire repair shop in Croatia. It has since expanded to produce various rubber and polyurethane products using advanced technologies like Seal Jet and Gasket Jet systems. The company now operates out of a 4,800 square meter facility and was certified to ISO 9001 and ISO 14001 standards in 2004. A new subsidiary, GRP, was founded in 2005 to specialize in tire recycling and production of goods from recycled tire granulates.
We are one of the fastest growing Manufacturer, service provider and Supplier firms providing added value in its offered superior quality HVAC & Clean Room Solutions. Apart from the industry proven design of our products.
Vibration test assembly with Environmental Test Chamber is designed and manufactured as per specific requirement of the customers meeting various international standards.
Suyog Engineers take this opportunity in introducing ourselves as a manufacturing and trading company based in Pune, Maharashtra, India. The company is established to serve the different types of products to battery industries. We are submitting the Introduction along with product details.
The document discusses Rittal's Hygienic Design features for enclosures used in food production facilities. Rittal's Hygienic Design is based on international standards for food machinery design and aims to reduce contamination risks through easy-clean surfaces without crevices. Key features highlighted include sloped roofs, large overhangs, chamfered edges, and seals that prevent gaps. Rittal's Hygienic Design enclosures and accessories are said to improve hygiene, increase productivity by reducing cleaning times, and help avoid production losses from contamination.
The document is a brochure from Rittal that describes their line of stainless steel enclosures and accessories. It includes specifications and dimensions for their range of compact enclosures, including terminal boxes, bus enclosures, electronic kombi systems, and more. The brochure also discusses Rittal's integrated system solutions, production capabilities, product combinations, and certifications.
This document provides information about pipes and fittings produced by aquatechnik, including multi-calor pipes, multi-eco pipes, and polipert pipes. It describes the materials and layers that make up each type of pipe, their specifications, intended uses, dimensions, and certifications. The document also discusses advantages of the pipe systems, installation guidelines, and competence and responsibility of the manufacturer.
Gumiimpex was founded in 1970 as an independent tire repair shop in Croatia. It has since expanded to produce various rubber and polyurethane products using advanced technologies like Seal Jet and Gasket Jet systems. The company now operates out of a 4,800 square meter facility and was certified to ISO 9001 and ISO 14001 standards in 2004. A new subsidiary, GRP, was founded in 2005 to specialize in tire recycling and production of goods from recycled tire granulates.
We are one of the fastest growing Manufacturer, service provider and Supplier firms providing added value in its offered superior quality HVAC & Clean Room Solutions. Apart from the industry proven design of our products.
Vibration test assembly with Environmental Test Chamber is designed and manufactured as per specific requirement of the customers meeting various international standards.
Suyog Engineers take this opportunity in introducing ourselves as a manufacturing and trading company based in Pune, Maharashtra, India. The company is established to serve the different types of products to battery industries. We are submitting the Introduction along with product details.
The document discusses Rittal's Hygienic Design features for enclosures used in food production facilities. Rittal's Hygienic Design is based on international standards for food machinery design and aims to reduce contamination risks through easy-clean surfaces without crevices. Key features highlighted include sloped roofs, large overhangs, chamfered edges, and seals that prevent gaps. Rittal's Hygienic Design enclosures and accessories are said to improve hygiene, increase productivity by reducing cleaning times, and help avoid production losses from contamination.
The document is a brochure from Rittal that describes their line of stainless steel enclosures and accessories. It includes specifications and dimensions for their range of compact enclosures, including terminal boxes, bus enclosures, electronic kombi systems, and more. The brochure also discusses Rittal's integrated system solutions, production capabilities, product combinations, and certifications.
The document describes plans for a new medical facility in Tripoli, Libya. It will include:
1. A PET department
2. Cyclotron laboratory
3. Technical rooms
The building will be approximately 68.7m x 20m with an interior height of 4.55m. It will have foundations, pillars, and slab covering made of reinforced concrete. Interior finishes will include plaster, stoneware tiles, and raised floors. The facility will also include mechanical, electrical, and security systems. The goal is to realize a new medical facility that meets the highest international standards.
Feniks produces shrinkable label application machines and accessories. Their machines are customized for each customer's needs and designed for quick payback, self-maintenance, and minimal label waste. Feniks machines are made of stainless steel and aluminum and use components from brands like Panasonic, Siemens, and Sick for automation and controls. The document provides details on various Feniks machine models, including shrink label applicators, steam tunnels, drying tunnels, and conveyors, along with the materials and components used.
EM-Series MINI Environmental Chambers from Envisys Technologies designed for table/desk-mounting use with small foot-prints. Modular design suitable for small component level testing applications and space-constraint laboratories.
We, Ecotone Acoustic Enclosure are India’s most reliable manufacturers of Acoustic products for Noise Control, NVH Test Chambers, Acoustic, Architectural, Auditoriums, Theatres, Conference halls, Gymnasium halls, Offices, Banquet halls, Design and Set-up of Recording Studios, Listening rooms, Home Theatres etc.
Ecotone Systems is the largest manufacturers and providers of Acoustic wall and ceiling products that provide Architects and Building owners an extensive range of products to chose from, which suits their aesthetic as well as acoustic requirements. Ecotone Acoustic Enclosure strives to help its customers enjoy the best ambience, at the same time minimizing its environmental impact as much as possible by providing sustainable, innovative and high-performance solutions for todays and tomorrows noise problems.
Trepko is an international company that produces filling and closing machinery. The document provides information about Trepko's 100 series machines, which are in-line machines for filling and closing pre-formed containers. The 100 series machines can be customized for different hygiene levels and capacities. They offer flexibility and reliability for production.
This document summarizes various pharmaceutical processing equipment from Umang including:
- A high shear granulator and fluid bed dryer for wet granulation and drying.
- A pelletizer and spheronizer for pelletization.
- A pan coater for film coating.
- A mouth dissolving film line for making oral strips.
- A homogenizer for semi-solid processing.
- A spray dryer for drying slurries.
The equipment is designed for small scale pre-formulation, formulation development, process validation, and academic use. Specifications including throughput, standard features, and optional features are provided for each model.
This document describes a drug stability test chamber manufactured by Technocracy Pvt. Ltd. It has programmable microprocessor controls and alarms for out-of-spec conditions. The chamber interior is stainless steel and exterior is powder coated mild steel. It has a temperature range of 0-65°C, humidity range of 20-95%, and precision controls for temperature and humidity. It is used to conduct stability and shelf-life studies on drugs and pharmaceuticals.
This document provides information on various extruder and spheronizer models from Umang Pharmatech Pvt. Ltd. It describes axial, cone, radial, die roller, basket, mixer, and hot melt extruders as well as spheronizers. For each model, it lists standard features such as material types, controls, and throughput capacities. The company aims to provide extrusion and pelletization equipment that builds upon proven technology and ensures consistent processing and validation from one machine to another.
Air Filters Catalog - Concept EngineersRajas Wadekar
Concept Engineers is an Indian manufacturer and exporter of industrial ventilation equipment established in 2000. It produces a wide range of products including fans, air handling units, air pollution control equipment, and industrial air filters. The company aims to provide high quality, reliable products and services at competitive prices. It serves clients in industries such as HVAC, petrochemicals, pharmaceuticals, food processing, and more. Concept Engineers has become a leading supplier of these products in India and has an expanding global export business.
Controlled atmosphere storage involves regulating oxygen, carbon dioxide, nitrogen, temperature and humidity levels to extend the shelf life of stored food products. Controlled atmosphere storage employs lower oxygen and higher carbon dioxide levels than ambient air. Controlled atmosphere storage inhibits bacterial and mould growth, protects against insects, reduces moisture loss and controls biochemical processes to slow ripening. Modern storage facilities include silos and bins of various materials and sizes. Controlled atmosphere storage can be combined with cold storage, which involves maintaining low temperatures to further extend shelf life. The design of a controlled atmosphere cold store involves considerations for insulation, refrigeration equipment, ventilation, storage chambers and maintenance procedures.
This document describes a seed germination chamber. It has a double-walled stainless steel interior and exterior with polyurethane foam insulation. It controls temperature from 5-60°C, humidity from 90-96% RH, and has fans for air circulation. The chamber is used to germinate seeds and support plant, tissue, and microorganism experiments by providing an optimized environment.
The document summarizes AMIPOX GRE pipe systems. It discusses that AMIPOX provides pipe solutions for water, sewage, gas, oil and industrial applications made of glass reinforced epoxy. Their new manufacturing site in Dammam provides pipes and consulting services worldwide. The pipes are corrosion resistant, lightweight, have low pressure loss and good economics. They can transport hundreds of chemicals and are used in industrial, oilfield, marine, utility and other applications.
The Farr Gold Series® cartridge dust and fume extractor combines enhanced performance with ease of service while cleaning the work environment of irritating dust and fumes.
Operating kitchen extraction equipment in a clean state provides several benefits: it greatly enhances fire safety by removing combustion materials, avoids hygiene issues by preventing grease leakage or backwash of fouled air, and controls odors. Regular cleaning is recommended to comply with maintenance codes and ensure reliability by preventing fan breakdown. Deep Clean Service offers an effective kitchen extraction cleaning process using modern bio-chemical techniques like degreasing and steam cleaning of grease filters, canopies, ducting, and extractor fans. Access hatches provide inexpensive and trouble-free access to equipment in ductwork and meet airtight sealing requirements.
Exheat Flameproof Hazardous Area Industrial Immersion Heaters, Zone 1 & 2 H...Thorne & Derrick UK
The document describes HFY flanged industrial immersion heaters. The heaters are suitable for heating non-corrosive liquids in commercial and industrial applications like hot water cylinders and process tanks. Each heater has an adjustable thermostat for temperature control and over-temperature protection. Typical applications include calorifier packages, hot water storage tanks, cleaning equipment, and boiler equipment. The heaters have individually replaceable heating elements housed in a corrosion protected steel enclosure with mounting flanges.
The document provides an overview of valve and actuator products from a company that has been developing, producing, and selling industrial valves and actuators for over 40 years. It employs around 1,000 people across multiple production locations and subsidiaries globally. The company offers a wide range of valve types, including resilient seated valves, PTFE valves, high performance valves, knife gate valves, and special application valves. It prides itself on outstanding quality and customized solutions through precise coordination of valves, actuators, and automation technology.
We are experts in the design and production of finned coils. Our innovative team of professionals is geared to meeting the challenges presented by our customers, and every coil we produce is customized to your unique requirements. This is achieved by integrating an extensive range of coil patterns with state-of-the-art technologies.
Your needs are our guidelines to deliver customized thermal and mechanical solutions that cover complete product lifecycles, from planning to design and production.
Acoustic Applications designed and constructed noise control facilities for a steel producer including an upper level control room and amenities area, and a lower level electrical room. The facilities were designed to support existing mill structures, provide safe access via stairwells and platforms, and withstand the noisy and dusty industrial environment. Sound insulation and ventilation systems allowed personnel to communicate comfortably while overseeing production areas. The turnkey project was completed within a limited installation schedule during a two-week plant shutdown.
This document summarizes a commercial aquatic equipment manufacturer called Emaux. In 3 sentences:
Emaux is a global manufacturer of commercial aquatic equipment such as swimming pool filters, water park equipment, and aquaculture systems. They have over 38 years of experience and produce high-quality, durable products made of non-corrosive materials at state-of-the-art facilities. Emaux offers customized commercial filters and other water treatment equipment along with design, manufacturing, installation, and maintenance services to meet customers' needs.
Plastics distributors and fabricators have a wide array of abilities. Emco Industrial Plastics and displays shares a "taste" of some of the services and capabilities offered in this slide presentation. Click on the company logo on the bottom of each page to learn more about each topic
The document discusses various types of equipment for mass and heat transfer, reactions, separation processes, and powder handling in the chemical industry. It describes random packing, internals, structured packing, trays, demisters, coalescers, pressure vessels, columns, heat exchangers, centrifuges, dynamic crossflow filtration, filter presses, rotating vacuum dryers, glass-lined and metal reactors, vibro energy sieves, volumetric and gravimetric feeders, vacuum and pressure conveying technology, emptying and filling stations, milling and sieving, glass-lined and PTFE-lined piping, bellows, compensators, static mixers, bursting discs, and process cartridge filters. Technical
Full range catalogue of Airtecnics air curtains 2015.
New models: Maxwell air curtain, Recessed Dam air curtain, Recessed Compact air curtain and some heat pump air curtains.
The document describes plans for a new medical facility in Tripoli, Libya. It will include:
1. A PET department
2. Cyclotron laboratory
3. Technical rooms
The building will be approximately 68.7m x 20m with an interior height of 4.55m. It will have foundations, pillars, and slab covering made of reinforced concrete. Interior finishes will include plaster, stoneware tiles, and raised floors. The facility will also include mechanical, electrical, and security systems. The goal is to realize a new medical facility that meets the highest international standards.
Feniks produces shrinkable label application machines and accessories. Their machines are customized for each customer's needs and designed for quick payback, self-maintenance, and minimal label waste. Feniks machines are made of stainless steel and aluminum and use components from brands like Panasonic, Siemens, and Sick for automation and controls. The document provides details on various Feniks machine models, including shrink label applicators, steam tunnels, drying tunnels, and conveyors, along with the materials and components used.
EM-Series MINI Environmental Chambers from Envisys Technologies designed for table/desk-mounting use with small foot-prints. Modular design suitable for small component level testing applications and space-constraint laboratories.
We, Ecotone Acoustic Enclosure are India’s most reliable manufacturers of Acoustic products for Noise Control, NVH Test Chambers, Acoustic, Architectural, Auditoriums, Theatres, Conference halls, Gymnasium halls, Offices, Banquet halls, Design and Set-up of Recording Studios, Listening rooms, Home Theatres etc.
Ecotone Systems is the largest manufacturers and providers of Acoustic wall and ceiling products that provide Architects and Building owners an extensive range of products to chose from, which suits their aesthetic as well as acoustic requirements. Ecotone Acoustic Enclosure strives to help its customers enjoy the best ambience, at the same time minimizing its environmental impact as much as possible by providing sustainable, innovative and high-performance solutions for todays and tomorrows noise problems.
Trepko is an international company that produces filling and closing machinery. The document provides information about Trepko's 100 series machines, which are in-line machines for filling and closing pre-formed containers. The 100 series machines can be customized for different hygiene levels and capacities. They offer flexibility and reliability for production.
This document summarizes various pharmaceutical processing equipment from Umang including:
- A high shear granulator and fluid bed dryer for wet granulation and drying.
- A pelletizer and spheronizer for pelletization.
- A pan coater for film coating.
- A mouth dissolving film line for making oral strips.
- A homogenizer for semi-solid processing.
- A spray dryer for drying slurries.
The equipment is designed for small scale pre-formulation, formulation development, process validation, and academic use. Specifications including throughput, standard features, and optional features are provided for each model.
This document describes a drug stability test chamber manufactured by Technocracy Pvt. Ltd. It has programmable microprocessor controls and alarms for out-of-spec conditions. The chamber interior is stainless steel and exterior is powder coated mild steel. It has a temperature range of 0-65°C, humidity range of 20-95%, and precision controls for temperature and humidity. It is used to conduct stability and shelf-life studies on drugs and pharmaceuticals.
This document provides information on various extruder and spheronizer models from Umang Pharmatech Pvt. Ltd. It describes axial, cone, radial, die roller, basket, mixer, and hot melt extruders as well as spheronizers. For each model, it lists standard features such as material types, controls, and throughput capacities. The company aims to provide extrusion and pelletization equipment that builds upon proven technology and ensures consistent processing and validation from one machine to another.
Air Filters Catalog - Concept EngineersRajas Wadekar
Concept Engineers is an Indian manufacturer and exporter of industrial ventilation equipment established in 2000. It produces a wide range of products including fans, air handling units, air pollution control equipment, and industrial air filters. The company aims to provide high quality, reliable products and services at competitive prices. It serves clients in industries such as HVAC, petrochemicals, pharmaceuticals, food processing, and more. Concept Engineers has become a leading supplier of these products in India and has an expanding global export business.
Controlled atmosphere storage involves regulating oxygen, carbon dioxide, nitrogen, temperature and humidity levels to extend the shelf life of stored food products. Controlled atmosphere storage employs lower oxygen and higher carbon dioxide levels than ambient air. Controlled atmosphere storage inhibits bacterial and mould growth, protects against insects, reduces moisture loss and controls biochemical processes to slow ripening. Modern storage facilities include silos and bins of various materials and sizes. Controlled atmosphere storage can be combined with cold storage, which involves maintaining low temperatures to further extend shelf life. The design of a controlled atmosphere cold store involves considerations for insulation, refrigeration equipment, ventilation, storage chambers and maintenance procedures.
This document describes a seed germination chamber. It has a double-walled stainless steel interior and exterior with polyurethane foam insulation. It controls temperature from 5-60°C, humidity from 90-96% RH, and has fans for air circulation. The chamber is used to germinate seeds and support plant, tissue, and microorganism experiments by providing an optimized environment.
The document summarizes AMIPOX GRE pipe systems. It discusses that AMIPOX provides pipe solutions for water, sewage, gas, oil and industrial applications made of glass reinforced epoxy. Their new manufacturing site in Dammam provides pipes and consulting services worldwide. The pipes are corrosion resistant, lightweight, have low pressure loss and good economics. They can transport hundreds of chemicals and are used in industrial, oilfield, marine, utility and other applications.
The Farr Gold Series® cartridge dust and fume extractor combines enhanced performance with ease of service while cleaning the work environment of irritating dust and fumes.
Operating kitchen extraction equipment in a clean state provides several benefits: it greatly enhances fire safety by removing combustion materials, avoids hygiene issues by preventing grease leakage or backwash of fouled air, and controls odors. Regular cleaning is recommended to comply with maintenance codes and ensure reliability by preventing fan breakdown. Deep Clean Service offers an effective kitchen extraction cleaning process using modern bio-chemical techniques like degreasing and steam cleaning of grease filters, canopies, ducting, and extractor fans. Access hatches provide inexpensive and trouble-free access to equipment in ductwork and meet airtight sealing requirements.
Exheat Flameproof Hazardous Area Industrial Immersion Heaters, Zone 1 & 2 H...Thorne & Derrick UK
The document describes HFY flanged industrial immersion heaters. The heaters are suitable for heating non-corrosive liquids in commercial and industrial applications like hot water cylinders and process tanks. Each heater has an adjustable thermostat for temperature control and over-temperature protection. Typical applications include calorifier packages, hot water storage tanks, cleaning equipment, and boiler equipment. The heaters have individually replaceable heating elements housed in a corrosion protected steel enclosure with mounting flanges.
The document provides an overview of valve and actuator products from a company that has been developing, producing, and selling industrial valves and actuators for over 40 years. It employs around 1,000 people across multiple production locations and subsidiaries globally. The company offers a wide range of valve types, including resilient seated valves, PTFE valves, high performance valves, knife gate valves, and special application valves. It prides itself on outstanding quality and customized solutions through precise coordination of valves, actuators, and automation technology.
We are experts in the design and production of finned coils. Our innovative team of professionals is geared to meeting the challenges presented by our customers, and every coil we produce is customized to your unique requirements. This is achieved by integrating an extensive range of coil patterns with state-of-the-art technologies.
Your needs are our guidelines to deliver customized thermal and mechanical solutions that cover complete product lifecycles, from planning to design and production.
Acoustic Applications designed and constructed noise control facilities for a steel producer including an upper level control room and amenities area, and a lower level electrical room. The facilities were designed to support existing mill structures, provide safe access via stairwells and platforms, and withstand the noisy and dusty industrial environment. Sound insulation and ventilation systems allowed personnel to communicate comfortably while overseeing production areas. The turnkey project was completed within a limited installation schedule during a two-week plant shutdown.
This document summarizes a commercial aquatic equipment manufacturer called Emaux. In 3 sentences:
Emaux is a global manufacturer of commercial aquatic equipment such as swimming pool filters, water park equipment, and aquaculture systems. They have over 38 years of experience and produce high-quality, durable products made of non-corrosive materials at state-of-the-art facilities. Emaux offers customized commercial filters and other water treatment equipment along with design, manufacturing, installation, and maintenance services to meet customers' needs.
Plastics distributors and fabricators have a wide array of abilities. Emco Industrial Plastics and displays shares a "taste" of some of the services and capabilities offered in this slide presentation. Click on the company logo on the bottom of each page to learn more about each topic
The document discusses various types of equipment for mass and heat transfer, reactions, separation processes, and powder handling in the chemical industry. It describes random packing, internals, structured packing, trays, demisters, coalescers, pressure vessels, columns, heat exchangers, centrifuges, dynamic crossflow filtration, filter presses, rotating vacuum dryers, glass-lined and metal reactors, vibro energy sieves, volumetric and gravimetric feeders, vacuum and pressure conveying technology, emptying and filling stations, milling and sieving, glass-lined and PTFE-lined piping, bellows, compensators, static mixers, bursting discs, and process cartridge filters. Technical
Full range catalogue of Airtecnics air curtains 2015.
New models: Maxwell air curtain, Recessed Dam air curtain, Recessed Compact air curtain and some heat pump air curtains.
Arvihitech is a manufacturer of Ermeto Tube fitting that are built to last. The EO-Plus fitting produces high pressure, leak-free connection of tubes and components in fluid systems.
UNITEK is a leading manufacturer of crosshead technology for the cable extrusion industry. Their product line includes fixed centered crossheads for single, dual, and triple layer extrusion, as well as accessories like automatic color changing systems, cartridges, tools, and bypasses. They have over 800 customers globally and aim to provide innovative solutions to increase productivity for cable manufacturers.
European SprayDry Technologies is a major global supplier of spray drying equipment and systems. They design and build spray dryers in the UK with over 40 years of experience. Spray dryers come in a variety of sizes from portable laboratory machines to large multi-stage industrial plants. European SprayDry specializes in tall form spray dryers with nozzle atomization to give operators precise control over powder properties. Larger systems can use natural gas, thermal oil, or steam heating while smaller laboratory dryers often use electricity.
Cofely Fabricom is a world-leading manufacturer of pipe bends produced through induction bending. They operate 5 production lines capable of bending pipes up to 64" in diameter with a high degree of flexibility. Cofely Fabricom works with all types of pipe materials and can produce single bends, spools, and custom orders. They have various heat treatment and finishing capabilities to ensure pipes meet industry standards for mechanical properties and corrosion resistance. Cofely Fabricom is ISO 9001 certified and prioritizes quality, safety, and environmental protection.
The largest exporters of vacuum bagging and composite tooling materials for prepreg/autoclave, resin infusion, and wet lay-up processes is Airtech Advanced Materials Group. With nearly 50 years of extrusion experience, Airtech is your local source for vacuum bagging materials, composite tooling producers, and 3D Print knowledge. For more details: https://airtech.com/
Tvm termoventilmec 2013-newsletter-17-chemical and pharmaceutics-engtermoventilmec
TVM termoventilmec srl developed a new bag-filter unit for a German chemical company to filter warm air containing explosive acidic powder at a coastal chemical plant. The bag-filter unit was designed using corrosion-resistant stainless steel and an automated bag cleaning system. It was designed to be compact while withstand explosions and filter particles below 5 mg/m3 to safely filter the air within specifications. The bag-filter unit demonstrates TVM's capabilities in developing filtration solutions for the chemical and pharmaceutical industries.
M/s Blue Star Ltd is India's leading air conditioning company with over 3,500 employees across 29 establishments. It provides air conditioning, refrigeration, and engineering services.
AMFA ClimaTech Solutions Pvt Ltd was established in 2010 in Mumbai and focuses on HVAC projects for data centers, clean rooms, and other precision applications. It is headed by two directors with extensive industry experience.
The company provides HVAC design, installation, validation, and maintenance services. It has strategic alliances with other firms to offer additional capabilities including clean room manufacturing.
ACI Company Overview provides information about ACI including that it is a designer and manufacturer of industrial air movement products established in 1969. It has a global presence through distributors worldwide and offers standard and custom engineered solutions across industries. ACI supplies industrial fans, airknife systems, drying solutions and accessories to industries such as food, beverage, automotive, and others.
This document provides information about HT Labor + Hospitaltechnik AG, a company that designs and constructs laboratory and hospital projects. It discusses the company's 50 years of experience and fully automated production facilities. It also outlines the business fields of hospital, laboratory, operating theatre, and other areas. The document details the materials, doors, wall coverings, control panels, and other products and components used in HT's projects. It provides examples of operating theatre, intensive care unit, and research lab projects. Finally, it discusses competence in areas like engineering, project management, hygiene, and infection control.
This document provides information on Gillard Cutting, a leading specialist in extrusion cutting technology. It summarizes their product range including Servo-Torq rotary cutters for cutting various materials from plastics to food, as well as caterpillar belt haul-off machines and circular blade cutters. The document promotes Gillard Cutting's innovation and experience in developing technically advanced cutting machines to provide optimized solutions for their customers' needs.
Headway Chemicals presents its range of fire protection and sealing products for the construction industry. It distributes products from NPT Italy, including one-part polyurethane sealants for joints in concrete and buildings. It also offers polyurethane foam, passive fire protection products, and intumescent fire stopping materials like sealants, mortars, coatings, and putty. Headway has a 20-year production history, fully equipped laboratories for product development and testing, and distributes globally through partnerships like the one with NPT Italy.
OverTec is a low pressure overmoulding system that positions between high pressure short cycle time processes for mass production and gravity fed, long cycle time processes for short runs and prototypes. It is a very cost effective way to seal and protect electronic components. Popular applications include connector potting, overmoulding PCBs, making electric cable glands, providing strain relief on cables and protecting sensors.
Modular operation theater by workspace solutionsAbhishek vyas
We would like to take opportunity to introduce with ADVANCE technology of MODULAR OPERATION THEATER.
WMSPL( India) tied up with a leader AKCmed (CZECH REPUBLIC)
· Design & Manufacture factory made modular operation theatres
· Complying to stringent EU medical norms
· Experience of more than 20 years
· Designed and executed more than 500 OTs in more than 25 countries
WMSPL, is an Indian arm based in Udaipur, Rajasthan with world class manufacturing facility suitable for manufacturing OTs.
· Designed and executed 150 plus modular control rooms in India and overseas
· Advanced sheet metal facility with machines from Germany, Italy and Japan
Contact us:
Abhishek vyas
abhishek@pyrotechworkspace.com
+91 90 12 14 777
This document provides an overview of Techno, an Italian company that specializes in electrical connection solutions. It discusses Techno's mission to explore new solutions through a complete service approach from design to manufacturing. It also outlines Techno's investment in R&D and culture of innovation. The document then summarizes Techno's focus on quality and several of its product lines, including TEETUBE®, TEEPLUG®, TEEBOX®, and others.
C5193 Case Study - Tube Inside Diameter Welding Control CabsChristian Senior
Acoustic Applications designed and manufactured four welding control cabins for a European steel manufacturer. The heavy duty cabins were constructed as single piece units to provide safe and comfortable working environments for operators. Double glazed windows and doors allowed visibility while reducing noise levels by 20dB, below legal exposure limits. The customer was extremely pleased with the quality, fit, and improved working conditions provided by the new cabins.
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
5th LF Energy Power Grid Model Meet-up SlidesDanBrown980551
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Introduction of Cybersecurity with OSS at Code Europe 2024Hiroshi SHIBATA
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-EfficiencyScyllaDB
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
Trusted Execution Environment for Decentralized Process MiningLucaBarbaro3
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...Tatiana Kojar
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...Alex Pruden
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
FRIUL FILIERE SPA COMPANY PROFILE
1.
2. COMPANY PROFILE
FRIUL FILIERE S.p.A. is an Italian company
which, for almost 40 years (1978), has been
manufacturing extruders, extrusion lines and
dies for profiles and pipes in all thermo-plastic
materials.
The company markets its products in Italy and
worldwide through its network of agents.
3. MISSION
To be the leading provider of customized extrusion Turn-Key plants creating
value for our clients, and recognized for our “can do” attitude, professionalism,
flexibility, levels of service and highly motivated people.
6. WHAT WE DO
SUPPORTING IN DEVELOPING CUSTOMERS IDEAS
FEASIBILITY STUDY
DESIGN WORK
ENGINEERING DEVELOPMENT
MATERIALS RESEARCH
PRODUCTION OF MACHINES AND DIES
TESTING OF COMPLETE PLANTS
8. RANGE OF PRODUCTION
1- COEXTRUDERS
2- SINGLE SCREW EXTRUDERS
3- CONICAL TWIN SCREW EXTRUDERS
4- PARALLEL TWIN SCREW EXTRUDERS
5- DOWNSTREAM
6- TOOLINGS FOR PROFILES
8- TOOLINGS FOR PIPES
9. COEXTRUDERS
NEW RANGE! U22 – U30 – U38
UNIVERSAL USE
SIMPLE MOVIMENTATION
ROTATION OF THE CO-EXTRUDING
BARREL
BEST CONNECTION
TECHNOLOGICAL ASSISTANCE
CLEAN AND SAFE
SLIDING SYSTEM FOR
DISCHARGING
POLYCARBONATE HOPPER
EASIER MAINTENANCE
11. DOWNSTREAM NEW
ENERGY SAVING
IMPROVED FUNCTIONAL DESIGN
EASIER MAN-MACHINE INTERFACE
PROCESS DATA CONTROL
SIMPLIFIED MAINTENANCE
REMOTE ASSISTANCE SERVICE
HIGHER SAFETY STANDARDS
NEW!
EXTRUSION LINE
12. TOOLINGS FOR PROFILES
SINGLE-STRAND
MULTIPLE STRAND
POST CO-EXTRUDED
CO-EXTRUDED
WITH INSERTS
LONG LIFE AGAINST MATERIAL ABRASION
13. CASE HISTORY:
THERMAL BREAK
WINDOWS AND DOORS ISOLATION
Friul Filiere has carried out a complete plant for the
extrusion of thermal-break profiles in 8 strands.
The plant ensures the production of 8 profiles at
2mt/min (90 kg/h) and it is composed of a single-screw
extruder Omega80 with PLC and a classical downstream
with insertion of auxiliary machines.
The extruded thermal break profiles present mechanical
characteristics of resistance similar to aluminum.
Long life toolings against material abrasion
High production capacity
Complete extrusion plant and know-how
14. CASE HISTORY:
PU PROFILES
BELTS AND GUIDES FIELD
Friul Filiere has developed comprehensive technology
for full, compact, and abrasion resistant polyurethane
(PU) profiles. A special calibration system ensures profile
control and dimensional accuracy. The controlled
industrial process is more precise than casting
production, and gives high-performance profiles that are
ideal for use on goods conveyor belts, as well as driving
belts or guiding profiles for diamond wire.
Full, compact and abrasion resistant PU profiles
the EXTRUSION process is no doubt the ideal way to
work the PU
Dedicated calibration system
15. CASE HISTORY:
PC PROFILES
LIGHTING SECTOR
Friul Filiere has carried out a complete plant for
the production of PC profiles dedicated to the
lighting sector and in particular to LED lighting.
Smooth, embossed or coextruded profiles for
better connection performances on guides.
Customized plant
High quality product
High production capacity
16. CASE HISTORY:
GASKETS PROFILES
AUTOMOTIVE
In response to the increasingly demanding and
elaborate requests from the automotive sector,
Friul Filiere S.p.A. has taken advantage of the
experience with the more important players in
this highly quality oriented market and has
implemented a special plant for the production of
co-extruded and reinforced gasket profiles.
Programming:
the production process of each profile
Controlling:
the daily production process
Reporting:
the events during the process
History:
of the production data
Self-diagnosis:
of the possible faults
Tele-assistance:
for remote support
17. CASE HISTORY:
DECKING
BUILDING AND CONSTRUCTION
FRIUL FILIERE SPA has carried out complete plants
for the production of decking profiles in different
composite materials
- Omega twin-screw extruder
- Omega evolution downstream
- Auxiliary machines (embossing unit, printing
unit, brushing units, etc.)
The future of decking has began.
Waterproof and weatherproof
Salt and chlorinated water resistant
Shatterproof and barefoot suitable
Non-slip
Resistant to insect and fungal attack
Various designs (texture, color, ...)
Easy Care
Sustainable and recyclable
18. PATENTED TECHNOLOGY:
FFC™
It’s the composite material consisting of the mixture
of thermoplastic material (50%) with vegetal fibers
(50%) and lightened with closed cells expansion.
FRIUL FILIERE SPA filed a patent which protects all
the aspects of this new technology: Formulation;
Plant; Process.
FFC™ is ideal for many applications: decorative door
frames, aluminum-wood frame profiles, skirting, wall
paneling, profiles in general.
Specific weight = 0.65 G./CM3
Economical
Simplified production process
Workable as wood
Recyclable
Self-Extinguishing
Dimensional stability
Resistance to humidity
Flexibility
Thermal and acoustic insulation
19. REFERENCES
FOR PROFILES
«Our vision and know-how give shape to the best extrusion lines and dies for special profiles and pipes.
We carry out your Turn-key projects.»
ALFER (Germany), ANAMET EUROPE BV (Netherlands), DEKORA (Poland), DECEUNINCK (Belgium),
DÖLLKEN (Germany), EXTRUPLESA (Spain), FARAPLAN SPA (Italy) , FORTE S.R.L. (Italy) , GEWISS (Italy),
GRAMAZINI (Brazil), KING WAI (Thailand), KLLT (Malaysia), LAMITECH (Colombia), LANCO WOOD MOULDINGS
(South Africa), OCEPLAST (France), PERTECH (Brazil), PERSONNA (Israel), POLI-ECO (Poland),
PROBOS (Portugal), RUS PLAST (Russia), TERAPLAST (Romania).
20. TOOLINGS FOR PIPES
DIE HEADS, CALIBRATION SYSTEM AND COOLING TANKS
FLEASIBILITY STUDY, DESIGN WORK
AND ENGINEERING DEVELOPMENT
SINGLE AND MULTIPLE STRANDS
COEXTRUDED
POST EXTRUDED
REINFORCED
MULTIPLE LAYERS
THIN INTERNAL LAYERS
21. CASE HISTORY:
DIP TUBING
From its unique position as manufacturer of dies and
equipment for extrusion, Friul Filiere has developed and
implemented a complete line for tubes up to 6 mm.
The component are all interfaced and controlled by one PC.
The production speed from 200 to 250 meters/min is
reachable only with the perfect flow management of the
material and the accurate control of the cooling
temperatures and a fine supervision of the vacuum.
Main functions and machines :
The material GRAVIMETRIC
DOSING and feeding system
The EXTRUDER with the set of
tooling complete with calibration
with a dedicated fine cooling
circuit
The LASER CONTROL for the
diameter
The WINDING UNIT integrated
with storage and cutting device.
The HAUL OFF SPEED
22. CASE HISTORY:
MICRODUCTS AND BUNDLING
TELECOMMUNICATIONS
Complete lines for coextruded Microduct at the
extrusion speed from 100 to 150 m/min depending on
the diameter and wall thickness of the profile.
Complete bundling line at the highest extrusion speed
ever reached: 30 m/min, using the same material for
both types of profiles (Microducts and bundling).
Innovative technology
Totally customized solution
Production performance guaranteed (the highest
extrusion speed ever reached)
Flexible and collaborative approach
Fast delivery time
23. With an under load deflection temperature equal to 207°C
PPS is able to resist to continuous shock and heat exposure
and it is a self-extinguishing material.
Friul Filiere has carried out a dedicated turn-key project
consisting in:
A special solution resistant to extreme
temperatures
a very special tooling due to the flow distributions,
die internal cooling for walls stabilization, the
choice of stainless steel, the heating system;
an innovative calibration system with high
temperature THERMOREGULATED CALIBRATORS.
CASE HISTORY:
PPS CONDUIT
RENEWABLE ENERGY
24. CASE HISTORY:
COATED FLEXIBLE METAL HOSES
In response to the precise technical market demand,
Friul Filiere has taken advantage of the experience with
the more important players in this highly quality
oriented field and has developed a special and specific
complete extrusion plant for the production of co-
extruded flexible metal strip-wound conduits with
thermoplastic layer. This plant features a continuous and
accurate in line control of the production with friendly
use characteristics that allows:
Setting: the production parameters of each
profile
Monitoring: Each step of the process
Controlling: Daily production process
Reporting: all events during the process
Remote-servicing for technical assistance
More in details
25. The several years of experience in designing and
manufacturing extrusion equipment and calibration systems
has given Friul Filiere the required expertise to realize
complete lines and tooling to produce pipes for the electric
field.
Perfect control of the co-extrusion
Minimum internal layer
Toolings in single or twin strand
CASE HISTORY:
COEXTRUDED PIPES
ELECTRIC FIELD
26. The several years of experience in designing and
manufacturing extrusion equipment and calibration systems
has given Friul Filiere the required expertise to realize
complete lines and tooling to produce pipes for the medical
field.
Great control of the pipe dimensions
High performance of the entire extruding
line
Machines suitable for White Room
conditions
CASE HISTORY:
DIP TUBING
MEDICAL FIELD
27. The several years of experience in designing and
manufacturing extrusion equipment and calibration systems
has given Friul Filiere the required expertise to realize
complete lines and tooling to produce pipes for small trees
protectors for agricultural field
Punching unit
Belling machine
Dedicated solution
CASE HISTORY:
PP ALVEOLAR PIPE
AGRICULTURAL FIELD
28. The several years of experience in designing and
manufacturing extrusion equipment and calibration systems
has given Friul Filiere the required expertise to realize
complete lines and tooling to produce pipes for air
compressed applications.
Different diameters
High speed
Customized plant
CASE HISTORY:
PA PIPES
AIR COMPRESSED USE
29. CASE HISTORY:
VARIABLE GEOMETRY
Friul Filiere has also developed extruding line for the
production of pipes in multiple exits and suitable to modify
the combinations of the profiles as number and geometry:
this result is obtained with the post extrusion process.
Variable number of strands (from one
exit to four)
Variable compositions produced by post-
extrusion
30. PATENTED TECHNOLOGY:
TUBEASY
Friul Filiere has dedicated its most recent patent to the
world of pipes, which is now confirming a growing
interest in Tubeasy. In the production start-up phase,
Tubeasy ensures a perfect alignment of the flow and the
desired thicknesses quickly and easily, and it also
reduces waste and costs. International groups have
upgraded their production lines with Tubeasy for process
optimization. Friul Filiere designs and manufactures
complete extrusion die heads for pipes, however also
existing heads can be upgraded with the Tubeasy system.
EASY - Extremely easy and manageable flow regulation
FAST - Very quick starting/setting time
PRECISE - Great accuracy for a perfect pipe
ECONOMICAL - Up to 60% scraps reduction in setting
SIMPLE - Only 2 screws for the perfect centring
32. REFERENCES
FOR PIPES AND TUBING FIELD
AKCES BIS SP. Z.O.O. (Poland), HAKA GERODUR AG (Switzerland), HMC PREMEDICAL SPA (Italy), KWH
PIPE(Danmark) AS, KWH PIPE (Poland), SP. Z.O.O., MWV CALMAR (Germany), OY KWH PIPE AB (Finland) ,
OY PIPELIFE FINLAND (Finland) , OY PRIMO FINLAND AB (Finland), PIPELIFE NETHERLAND (Netherlands),
PIPELIFE NORGE AS (Norway), PIPELIFE SVERIGE (Sweden), PLASOTEC (Spain), TECNOSYSTEMI (Italy), SAMI
PLASTIC (Italy),RELIANCE INDUSTRIES LTD (India), S.I.F.R.A. EST SPA (Italy), UPONOR AS (Norway).
«Our vision and know-how give shape to the best extrusion lines and dies for special profiles and pipes.
We carry out your Turn-key projects.»
33. 33030 - Buia (UD) - Italy
T. +39.0432.961811
Thank you for your kind attention.