fountry ppt.pptx
•Download as PPTX, PDF•
0 likes•5 views
A foundry is a factory where metal is melted and poured into molds to produce objects. The key activities in a foundry involve molding, melting, and casting metal alloys. The basic steps in sand casting are pattern making, core making, molding, melting and pouring, and cleaning. Foundries produce metal products like engine components, motor parts, pipes, and parts for railroads and heavy machinery through casting processes.
Report
Share
Report
Share
Recommended
Casting and types
This document discusses various casting processes including investment casting, plaster mold casting, ceramic mold casting, permanent mold casting, and die casting. It describes the key steps in each process and notes advantages and limitations. Defects that can occur in castings such as misruns, cold shuts, and shrinkage cavities are also outlined.
Casting and welding technology
Hot forming processes, such as die-casting, investment casting, plaster casting, and sand casting, each provide their own unique manufacturing benefits. Comparing both the advantages and disadvantages of the common types of casting processes can help in selecting the method best suited for a given production run.
WL 112 Ch08 ch08 presentation
This document discusses various methods for producing steel products, including casting, forging, extrusion, and powder metallurgy. It provides details on the casting process, including melting steel, transporting it in ladles, molding techniques, and addressing issues like misruns and porosity. Forging is described as shaping metal through plastic deformation using hammers or presses. The document outlines the forging process and notes that forgings have very high toughness and desirable grain flow. Extrusion and powder metallurgy techniques are also briefly mentioned.
Investment & permanent casting
This document discusses different casting processes and provides information about a group project. It describes investment casting, permanent mold casting, core sand molding, and the construction of a cupola furnace. Investment casting involves creating a ceramic mold from a wax pattern that is then melted out before pouring molten metal. Permanent mold casting uses reusable metal molds. Core sand molding employs specialized baked sand for casting hollow objects. A cupola furnace is a furnace used in foundries to melt scrap iron.
Casting ,,,,,By Bilal Wahla
This document summarizes various casting processes and their requirements. It describes sand casting, die casting, shell mould casting, investment casting, and centrifugal casting. For each process, it provides an overview and the main steps. Some key points include that sand casting uses sand as the mold material and accounts for over 70% of metal castings. Die casting forces molten metal under high pressure into tool steel dies. Shell mould casting uses a resin-covered sand to form expendable molds. Investment casting is also called lost-wax casting, one of the oldest metal forming techniques. Videos are also included to demonstrate each casting process. Mold cavity, melting, pouring, solidification, mold removal, and cleaning are identified
6 Types Of Casting Processes
Continue reading to know more about each stage of the casting process. The product may subsequently be subjected to various finishing processes, depending on its intended use.
Casting & its types in metals
Casting is a process where molten metal is poured into a mold and allowed to solidify. There are several casting methods, including sand casting where a mold is made of sand and discarded after use, investment casting where a wax pattern is used to make a ceramic mold, and die casting where molds called dies are used to produce parts by injecting molten metal under high pressure. Each method has advantages like complexity of parts possible but also disadvantages like costs or surface finish.
U3 p3 special casting methods
This document discusses various molding and casting processes, including:
1. Carbon dioxide molding process, investment casting process, shell molding process, die casting process, full molding process, and vacuum-sealed casting process.
2. It provides details on the steps and advantages/disadvantages of processes like shell molding, investment casting, plaster mold casting, and permanent mold casting.
3. References are made to keywords and websites for additional information on topics like sand casting and carbon dioxide molding.
Recommended
Casting and types
This document discusses various casting processes including investment casting, plaster mold casting, ceramic mold casting, permanent mold casting, and die casting. It describes the key steps in each process and notes advantages and limitations. Defects that can occur in castings such as misruns, cold shuts, and shrinkage cavities are also outlined.
Casting and welding technology
Hot forming processes, such as die-casting, investment casting, plaster casting, and sand casting, each provide their own unique manufacturing benefits. Comparing both the advantages and disadvantages of the common types of casting processes can help in selecting the method best suited for a given production run.
WL 112 Ch08 ch08 presentation
This document discusses various methods for producing steel products, including casting, forging, extrusion, and powder metallurgy. It provides details on the casting process, including melting steel, transporting it in ladles, molding techniques, and addressing issues like misruns and porosity. Forging is described as shaping metal through plastic deformation using hammers or presses. The document outlines the forging process and notes that forgings have very high toughness and desirable grain flow. Extrusion and powder metallurgy techniques are also briefly mentioned.
Investment & permanent casting
This document discusses different casting processes and provides information about a group project. It describes investment casting, permanent mold casting, core sand molding, and the construction of a cupola furnace. Investment casting involves creating a ceramic mold from a wax pattern that is then melted out before pouring molten metal. Permanent mold casting uses reusable metal molds. Core sand molding employs specialized baked sand for casting hollow objects. A cupola furnace is a furnace used in foundries to melt scrap iron.
Casting ,,,,,By Bilal Wahla
This document summarizes various casting processes and their requirements. It describes sand casting, die casting, shell mould casting, investment casting, and centrifugal casting. For each process, it provides an overview and the main steps. Some key points include that sand casting uses sand as the mold material and accounts for over 70% of metal castings. Die casting forces molten metal under high pressure into tool steel dies. Shell mould casting uses a resin-covered sand to form expendable molds. Investment casting is also called lost-wax casting, one of the oldest metal forming techniques. Videos are also included to demonstrate each casting process. Mold cavity, melting, pouring, solidification, mold removal, and cleaning are identified
6 Types Of Casting Processes
Continue reading to know more about each stage of the casting process. The product may subsequently be subjected to various finishing processes, depending on its intended use.
Casting & its types in metals
Casting is a process where molten metal is poured into a mold and allowed to solidify. There are several casting methods, including sand casting where a mold is made of sand and discarded after use, investment casting where a wax pattern is used to make a ceramic mold, and die casting where molds called dies are used to produce parts by injecting molten metal under high pressure. Each method has advantages like complexity of parts possible but also disadvantages like costs or surface finish.
U3 p3 special casting methods
This document discusses various molding and casting processes, including:
1. Carbon dioxide molding process, investment casting process, shell molding process, die casting process, full molding process, and vacuum-sealed casting process.
2. It provides details on the steps and advantages/disadvantages of processes like shell molding, investment casting, plaster mold casting, and permanent mold casting.
3. References are made to keywords and websites for additional information on topics like sand casting and carbon dioxide molding.
1. Manufacturing process.pptx
Manufacturing processes can be classified into four main categories: casting, forming, fabrication, and material removal. Casting includes processes like sand casting and die casting that involve pouring molten material into molds. Forming processes shape materials like rolling, forging, and extrusion. Fabrication involves joining processes like various types of welding. Material removal processes remove excess material through techniques like turning, milling, and grinding. Economics is an important consideration in any manufacturing process.
Casting process
Casting is a process where molten metal is poured into a mold and solidifies to form the desired shape. There are two main types of casting processes - those using expendable molds like sand, and those using permanent metal molds. The mold contains the cavity that defines the external shape of the part as well as any internal cores. Direction solidification is important to prevent shrinkage defects and is controlled using features like risers and chills. Properties of the final part are dependent on factors like alloy composition and solidification rate.
dokumen.tips_training-report-on-jyoti-cnc-automation-ltd(1).pptx
This document provides an overview of the industrial training completed at Jyoti CNC Automation Ltd. It describes the various shops within the company including the foundry shop, sheet metal shop, paint shop, machining shop, and assembly shop. It provides details about the casting process, sheet metal working processes, surface coating processes, machining processes, and assembly process for CNC machines. It also lists the machinery and equipment used in each shop.
Metal casting presentation new222
This PPT will let you know about metal casting and more specifically about the type of casting that is, Die casting, types of die casting, Cleaning of castings and inspection of casting
2.casting process
The document describes the casting process and its key terms. It discusses the main steps: pattern making, mould preparation including gating and risering, core making, melting and pouring, and cleaning and inspection. It provides details on each step and describes how a mould is made by packing sand around a pattern. Common components produced by casting are also listed, such as automobile and aircraft parts. Advantages include the ability to make complex shapes easily and economically, while limitations include potential defects and inferior properties compared to other processes.
Special Casting Processes.pptx
Special Casting Processes
Centrifugal Casting
Semi centrifugal casting
Centrifuging
Die Casting
Gravity Die Casting
Pressure die casting
Hot chamber die-casting:
Submerged plunger die casting
Air blown or goose neck die casting machine
Investment Casting
Defects in Casting
Blow holes Casting Defects
Shrinkage
Crack
Inclusions
Lift and shift
Swell
Fins
Misrun and cold shut
Metal Penetration
Hard spot
Run out
Drop
Warpage
Casting Defect.pptx
The document discusses casting quality and defects that can occur during the casting process. It describes general defects that can happen with any casting method as well as defects specific to sand casting. It also covers casting materials, including ferrous alloys like cast iron and steel, and nonferrous alloys such as aluminum, copper, and zinc alloys. Product design considerations for castings are outlined such as simplifying geometry, avoiding sharp corners, and allowing for tolerances and machining.
Special casting Techniques
1. Shell casting involves making a shell mold by applying a mixture of sand and thermosetting resin to a heated metal pattern. This allows for casting of parts with complex shapes and good surface finish tolerance.
2. Investment casting, also called lost-wax casting, involves making a wax pattern that is coated with refractory material to form a ceramic mold, melting out the wax to leave a cavity for molten metal. This enables production of parts with intricate details and close tolerances.
3. Die casting uses high pressure to force molten metal into molds, allowing precise replication of complex shapes. It is well-suited for producing parts from non-ferrous alloys in high volumes.
Investment casting processes, Steps and Applications by polayya chintada
This document provides an overview of the investment casting production technology course. It defines investment casting as a lost wax casting process where a wax or plastic pattern is used to create a ceramic mold, which is then filled with molten metal. The document outlines the key steps in investment casting including pattern making, assembly, shell building, dewaxing, metal casting pouring, knockout, and cutoff. Examples of applications for investment casting include parts for the aerospace, medical, and military industries due to its ability to produce complex and high-precision geometries. The course aims to provide insight into metal casting processes and gating systems.
Lecture 7 steel
Iron ore is mined all over the world and must contain at least 20% iron to be economically viable. Magnetite and hematite ores have high iron content. Approximately 2 billion tons of iron ore are mined annually, with China, Australia and Brazil dominating production. Steel is produced via smelting iron ore in blast furnaces or electric arc furnaces. Rebar, structural sections and nuts/bolts are common steel products. Steel is strong and has properties well-suited for reinforcing concrete. The steelmaking process involves melting scrap, adjusting chemistry, continuous casting and rolling billets. Rebar is tested to ensure it meets specifications for strength, elongation and bending.
WL 112 Ch07 ch07 presentation
The document discusses the process of producing steel from iron ore and scrap metal. It begins with extracting iron oxide from taconite ore and refining it into pig iron in a blast furnace. Scrap metal is also a valuable source of iron. The pig iron and scrap metal are then combined and refined in a basic oxygen furnace to produce steel. Finally, the steel is continuously cast into blocks and shapes for use in various applications.
Manufacturing processes Casting
Concept of Casting are discuss here, with lot of diagram and video clip because of better understanding for the student.
My pd cdrillbitpresentation - copy
The document summarizes the manufacturing process of polycrystalline diamond compact (PDC) drill bits. Key steps include: (1) designing the bit using software, (2) milling and turning the matrix crown and blank, (3) plotting cutter and nozzle placements, (4) loading the mold with tungsten carbide and binder powder, (5) sintering in a furnace, (6) machining and attaching the crown, shank and cutters, and (7) final inspection before shipping. PDC cutters are made of synthetic diamond crystals bonded to a tungsten carbide substrate to provide hardness and durability for drilling applications.
1666442103110_1666248053599_1666247879398_Mechanical Castings ppt-2.ppt
It is a ppt on topic metal casting from production engineering which is very important in many competitive exams.
Wires, Tubes, Pipes, Steel Bars and S.S. Sheets Production with Ferrous Metal...
Wires, Tubes, Pipes, Steel Bars and S.S. Sheets Production with Ferrous Metal Casting & Processing (Hot Rolled Bars, Hot Rolled Bars, Mild Steel Bars, Seamless Tube and Pipe, Laser Beam Welding, Friction Welding, Spot TIG, Hot Wire TIG, Hot Wire MIG, Machine Reamer, Hand Reamers, Hand Reamers)
Ferrous materials have made a major contribution to the development of modern technology; they span a tremendous range of properties and applications. Reflecting the industrial practices, the information provided here offers easy access to reliable processes involved in the manufacturing of Steel products like Steel Bars, Wires, Tubes, Pipes, Sheets etc. that proves to be the backbone of construction and automobile industries booming worldwide.
See more
https://goo.gl/l4cMOK
https://goo.gl/swvOjD
https://goo.gl/hr5zNG
Contact us:
Niir Project Consultancy Services
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
Production of Steel Bars, Steel Bars Manufacturing, Manufacturing Process of Steel Bars, Steel Bars Manufacturing Process, Steel Bar Production Process, Steel Bar Production, Steel Making Process, Steel Production Process, Iron and Steel Manufacturing Process, Steel Bars Manufacturing Plant, Manufacturing of Steel, Production of Wires and Steel Bars, Manufacture of Steel Bars, Steel Making Industry, Ferrous Castings, Casting Ferrous Metals, Sand Casting, Shell-Mold Casting, Expendable-Pattern Casting (Lost Foam Process), Plaster Mold Casting, Ceramic Mold Casting, Investment Casting (Lost Wax Process), Vacuum Casting, Permanent Mold Casting, Metal Stamping, Sheet Metal Stamping, Ferrous Metal Stampings, Forming and Casting of Ferrous Metals, Metal Forming Process, Heat Treatment Process for Ferrous Metals, Ferrous Metal Production, Forming Process of Ferrous Metals, Machining Process of Ferrous Metals, Joining Process of Ferrous Metals, Stainless Steel Wire Manufacturing, Production of Stainless Steel Wires, SS Wire Manufacture in India, Steel Wire Manufacturing Process, Method of Drawing Stainless Steel Wire, Stainless Steel Wire Production Process, Process of Stainless Steel Wire Drawing, Steel Tube and Pipe Manufacturing Process, Stainless Steel Pipe and Tube Manufacturing Process, Methods of Manufacturing Steel Tubes and Pipe, Tube and Pipe Production, Manufacturing Process and Products of Steel Pipes and Tubes, Steel Pipe Manufacturing, Manufacturing of Steel Tubes, Steel Pipes Manufacturing Process, Stainless Steel Tube and Pipe Making Machine, Steel Tubing and Pipe Manufacturing Plant, Steel Tube Production Line, Manufacture of Tubes and Pipes, Spiral Pipe Production, Laser Beam Welding, Friction Welding, Spiral Pipe Manufacturing Process, Spiral Welded Pipe Manufacturing Process
Introduction to mp prathik
This document provides information on casting processes and pattern making. It begins with an introduction and overview of casting classification and types of production systems. It then discusses specific casting processes like sand casting and rolling. Key factors for selecting a production process are outlined. The document also defines important terms in casting, describes the basic steps of making a casting, and lists common products made through casting. It discusses the casting process in detail, provides examples of components produced through casting, and notes advantages and limitations. Finally, it introduces pattern making, comparing patterns to castings, listing pattern functions and materials, and describing common pattern allowances.
New-Microsoft-Office-PowerPoint-Presentation.pptx
This document provides information on steel production processes and common defects associated with manufacturing processes. It discusses the basic oxygen process for steel production, which involves blowing oxygen onto molten pig iron to reduce the carbon content. Continuous casting is presented as an alternative to ingot casting. Common defects from steelmaking like pipes, non-metallic inclusions, and segregation of metals are also summarized. Additional wrought production methods like forging, extrusion, and rolling are described along with related defects. Common casting processes and defects are outlined. Finally, welding techniques like electric arc welding and defects like cracks and inclusions are summarized at a high level.
training report on Jyoti cnc automation ltd.
This document provides an overview of Jyoti CNC Automation Ltd., including descriptions of its various production shops. The company operates foundry, sheet metal, paint, machining, and assembly shops. In the foundry shop, the casting process is described, involving sand mixing and mold making, melting and pouring metal, cooling and removing castings. The sheet metal shop uses laser cutting, bending, welding, and grinding equipment. The paint shop provides surface coating using pretreatment and powder coating. The machining shop machines casted parts using techniques like turning, milling, and grinding. The assembly shop assembles CNC machines using a fixed position layout.
Mec welding ppt 1
Casting is a process where molten metal is poured into a mold and solidifies, taking the shape of the mold cavity. It involves melting metal, pouring it into a mold, and allowing it to solidify. Sand casting uses molds made of sand that must be destroyed to remove the casting. The mold contains the cavity shape and may include cores and a gating system to guide the molten metal flow before solidifying.
6 processes of casting production
In this article, some processes the most essential point to keep in mind is that the steel casting process is not easy. This is because steel offers significantly more strength than any other type of metal, can be cast with relative ease and is resistant to corrosion.
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
More Related Content
Similar to fountry ppt.pptx
1. Manufacturing process.pptx
Manufacturing processes can be classified into four main categories: casting, forming, fabrication, and material removal. Casting includes processes like sand casting and die casting that involve pouring molten material into molds. Forming processes shape materials like rolling, forging, and extrusion. Fabrication involves joining processes like various types of welding. Material removal processes remove excess material through techniques like turning, milling, and grinding. Economics is an important consideration in any manufacturing process.
Casting process
Casting is a process where molten metal is poured into a mold and solidifies to form the desired shape. There are two main types of casting processes - those using expendable molds like sand, and those using permanent metal molds. The mold contains the cavity that defines the external shape of the part as well as any internal cores. Direction solidification is important to prevent shrinkage defects and is controlled using features like risers and chills. Properties of the final part are dependent on factors like alloy composition and solidification rate.
dokumen.tips_training-report-on-jyoti-cnc-automation-ltd(1).pptx
This document provides an overview of the industrial training completed at Jyoti CNC Automation Ltd. It describes the various shops within the company including the foundry shop, sheet metal shop, paint shop, machining shop, and assembly shop. It provides details about the casting process, sheet metal working processes, surface coating processes, machining processes, and assembly process for CNC machines. It also lists the machinery and equipment used in each shop.
Metal casting presentation new222
This PPT will let you know about metal casting and more specifically about the type of casting that is, Die casting, types of die casting, Cleaning of castings and inspection of casting
2.casting process
The document describes the casting process and its key terms. It discusses the main steps: pattern making, mould preparation including gating and risering, core making, melting and pouring, and cleaning and inspection. It provides details on each step and describes how a mould is made by packing sand around a pattern. Common components produced by casting are also listed, such as automobile and aircraft parts. Advantages include the ability to make complex shapes easily and economically, while limitations include potential defects and inferior properties compared to other processes.
Special Casting Processes.pptx
Special Casting Processes
Centrifugal Casting
Semi centrifugal casting
Centrifuging
Die Casting
Gravity Die Casting
Pressure die casting
Hot chamber die-casting:
Submerged plunger die casting
Air blown or goose neck die casting machine
Investment Casting
Defects in Casting
Blow holes Casting Defects
Shrinkage
Crack
Inclusions
Lift and shift
Swell
Fins
Misrun and cold shut
Metal Penetration
Hard spot
Run out
Drop
Warpage
Casting Defect.pptx
The document discusses casting quality and defects that can occur during the casting process. It describes general defects that can happen with any casting method as well as defects specific to sand casting. It also covers casting materials, including ferrous alloys like cast iron and steel, and nonferrous alloys such as aluminum, copper, and zinc alloys. Product design considerations for castings are outlined such as simplifying geometry, avoiding sharp corners, and allowing for tolerances and machining.
Special casting Techniques
1. Shell casting involves making a shell mold by applying a mixture of sand and thermosetting resin to a heated metal pattern. This allows for casting of parts with complex shapes and good surface finish tolerance.
2. Investment casting, also called lost-wax casting, involves making a wax pattern that is coated with refractory material to form a ceramic mold, melting out the wax to leave a cavity for molten metal. This enables production of parts with intricate details and close tolerances.
3. Die casting uses high pressure to force molten metal into molds, allowing precise replication of complex shapes. It is well-suited for producing parts from non-ferrous alloys in high volumes.
Investment casting processes, Steps and Applications by polayya chintada
This document provides an overview of the investment casting production technology course. It defines investment casting as a lost wax casting process where a wax or plastic pattern is used to create a ceramic mold, which is then filled with molten metal. The document outlines the key steps in investment casting including pattern making, assembly, shell building, dewaxing, metal casting pouring, knockout, and cutoff. Examples of applications for investment casting include parts for the aerospace, medical, and military industries due to its ability to produce complex and high-precision geometries. The course aims to provide insight into metal casting processes and gating systems.
Lecture 7 steel
Iron ore is mined all over the world and must contain at least 20% iron to be economically viable. Magnetite and hematite ores have high iron content. Approximately 2 billion tons of iron ore are mined annually, with China, Australia and Brazil dominating production. Steel is produced via smelting iron ore in blast furnaces or electric arc furnaces. Rebar, structural sections and nuts/bolts are common steel products. Steel is strong and has properties well-suited for reinforcing concrete. The steelmaking process involves melting scrap, adjusting chemistry, continuous casting and rolling billets. Rebar is tested to ensure it meets specifications for strength, elongation and bending.
WL 112 Ch07 ch07 presentation
The document discusses the process of producing steel from iron ore and scrap metal. It begins with extracting iron oxide from taconite ore and refining it into pig iron in a blast furnace. Scrap metal is also a valuable source of iron. The pig iron and scrap metal are then combined and refined in a basic oxygen furnace to produce steel. Finally, the steel is continuously cast into blocks and shapes for use in various applications.
Manufacturing processes Casting
Concept of Casting are discuss here, with lot of diagram and video clip because of better understanding for the student.
My pd cdrillbitpresentation - copy
The document summarizes the manufacturing process of polycrystalline diamond compact (PDC) drill bits. Key steps include: (1) designing the bit using software, (2) milling and turning the matrix crown and blank, (3) plotting cutter and nozzle placements, (4) loading the mold with tungsten carbide and binder powder, (5) sintering in a furnace, (6) machining and attaching the crown, shank and cutters, and (7) final inspection before shipping. PDC cutters are made of synthetic diamond crystals bonded to a tungsten carbide substrate to provide hardness and durability for drilling applications.
1666442103110_1666248053599_1666247879398_Mechanical Castings ppt-2.ppt
It is a ppt on topic metal casting from production engineering which is very important in many competitive exams.
Wires, Tubes, Pipes, Steel Bars and S.S. Sheets Production with Ferrous Metal...
Wires, Tubes, Pipes, Steel Bars and S.S. Sheets Production with Ferrous Metal Casting & Processing (Hot Rolled Bars, Hot Rolled Bars, Mild Steel Bars, Seamless Tube and Pipe, Laser Beam Welding, Friction Welding, Spot TIG, Hot Wire TIG, Hot Wire MIG, Machine Reamer, Hand Reamers, Hand Reamers)
Ferrous materials have made a major contribution to the development of modern technology; they span a tremendous range of properties and applications. Reflecting the industrial practices, the information provided here offers easy access to reliable processes involved in the manufacturing of Steel products like Steel Bars, Wires, Tubes, Pipes, Sheets etc. that proves to be the backbone of construction and automobile industries booming worldwide.
See more
https://goo.gl/l4cMOK
https://goo.gl/swvOjD
https://goo.gl/hr5zNG
Contact us:
Niir Project Consultancy Services
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
Production of Steel Bars, Steel Bars Manufacturing, Manufacturing Process of Steel Bars, Steel Bars Manufacturing Process, Steel Bar Production Process, Steel Bar Production, Steel Making Process, Steel Production Process, Iron and Steel Manufacturing Process, Steel Bars Manufacturing Plant, Manufacturing of Steel, Production of Wires and Steel Bars, Manufacture of Steel Bars, Steel Making Industry, Ferrous Castings, Casting Ferrous Metals, Sand Casting, Shell-Mold Casting, Expendable-Pattern Casting (Lost Foam Process), Plaster Mold Casting, Ceramic Mold Casting, Investment Casting (Lost Wax Process), Vacuum Casting, Permanent Mold Casting, Metal Stamping, Sheet Metal Stamping, Ferrous Metal Stampings, Forming and Casting of Ferrous Metals, Metal Forming Process, Heat Treatment Process for Ferrous Metals, Ferrous Metal Production, Forming Process of Ferrous Metals, Machining Process of Ferrous Metals, Joining Process of Ferrous Metals, Stainless Steel Wire Manufacturing, Production of Stainless Steel Wires, SS Wire Manufacture in India, Steel Wire Manufacturing Process, Method of Drawing Stainless Steel Wire, Stainless Steel Wire Production Process, Process of Stainless Steel Wire Drawing, Steel Tube and Pipe Manufacturing Process, Stainless Steel Pipe and Tube Manufacturing Process, Methods of Manufacturing Steel Tubes and Pipe, Tube and Pipe Production, Manufacturing Process and Products of Steel Pipes and Tubes, Steel Pipe Manufacturing, Manufacturing of Steel Tubes, Steel Pipes Manufacturing Process, Stainless Steel Tube and Pipe Making Machine, Steel Tubing and Pipe Manufacturing Plant, Steel Tube Production Line, Manufacture of Tubes and Pipes, Spiral Pipe Production, Laser Beam Welding, Friction Welding, Spiral Pipe Manufacturing Process, Spiral Welded Pipe Manufacturing Process
Introduction to mp prathik
This document provides information on casting processes and pattern making. It begins with an introduction and overview of casting classification and types of production systems. It then discusses specific casting processes like sand casting and rolling. Key factors for selecting a production process are outlined. The document also defines important terms in casting, describes the basic steps of making a casting, and lists common products made through casting. It discusses the casting process in detail, provides examples of components produced through casting, and notes advantages and limitations. Finally, it introduces pattern making, comparing patterns to castings, listing pattern functions and materials, and describing common pattern allowances.
New-Microsoft-Office-PowerPoint-Presentation.pptx
This document provides information on steel production processes and common defects associated with manufacturing processes. It discusses the basic oxygen process for steel production, which involves blowing oxygen onto molten pig iron to reduce the carbon content. Continuous casting is presented as an alternative to ingot casting. Common defects from steelmaking like pipes, non-metallic inclusions, and segregation of metals are also summarized. Additional wrought production methods like forging, extrusion, and rolling are described along with related defects. Common casting processes and defects are outlined. Finally, welding techniques like electric arc welding and defects like cracks and inclusions are summarized at a high level.
training report on Jyoti cnc automation ltd.
This document provides an overview of Jyoti CNC Automation Ltd., including descriptions of its various production shops. The company operates foundry, sheet metal, paint, machining, and assembly shops. In the foundry shop, the casting process is described, involving sand mixing and mold making, melting and pouring metal, cooling and removing castings. The sheet metal shop uses laser cutting, bending, welding, and grinding equipment. The paint shop provides surface coating using pretreatment and powder coating. The machining shop machines casted parts using techniques like turning, milling, and grinding. The assembly shop assembles CNC machines using a fixed position layout.
Mec welding ppt 1
Casting is a process where molten metal is poured into a mold and solidifies, taking the shape of the mold cavity. It involves melting metal, pouring it into a mold, and allowing it to solidify. Sand casting uses molds made of sand that must be destroyed to remove the casting. The mold contains the cavity shape and may include cores and a gating system to guide the molten metal flow before solidifying.
6 processes of casting production
In this article, some processes the most essential point to keep in mind is that the steel casting process is not easy. This is because steel offers significantly more strength than any other type of metal, can be cast with relative ease and is resistant to corrosion.
Similar to fountry ppt.pptx (20)
dokumen.tips_training-report-on-jyoti-cnc-automation-ltd(1).pptx
dokumen.tips_training-report-on-jyoti-cnc-automation-ltd(1).pptx
Investment casting processes, Steps and Applications by polayya chintada
Investment casting processes, Steps and Applications by polayya chintada
1666442103110_1666248053599_1666247879398_Mechanical Castings ppt-2.ppt
1666442103110_1666248053599_1666247879398_Mechanical Castings ppt-2.ppt
Wires, Tubes, Pipes, Steel Bars and S.S. Sheets Production with Ferrous Metal...
Wires, Tubes, Pipes, Steel Bars and S.S. Sheets Production with Ferrous Metal...
Recently uploaded
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
Butterfly Valves Manufacturer (LBF Series).pdf
We have designed & manufacture the Lubi Valves LBF series type of Butterfly Valves for General Utility Water applications as well as for HVAC applications.
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
The need for ecofriendly materials as building materials in this century cannot be overemphasized
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
Flow Through Pipe: the analysis of fluid flow within pipes
Flow Through Pipe: This topic covers the analysis of fluid flow within pipes, focusing on laminar and turbulent flow regimes, continuity equation, Bernoulli's equation, Darcy-Weisbach equation, head loss due to friction, and minor losses from fittings and bends. Understanding these principles is crucial for efficient pipe system design and analysis.
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
Impartiality as per ISO /IEC 17025:2017 Standard
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
Recently uploaded (20)
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
Flow Through Pipe: the analysis of fluid flow within pipes
Flow Through Pipe: the analysis of fluid flow within pipes
Literature review for prompt engineering of ChatGPT.pptx
Literature review for prompt engineering of ChatGPT.pptx
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
fountry ppt.pptx
- 1. FOUNDRY Foundry shop: A factory where metal is melted and poured into specially shaped containers to produce objects.
- 2. Activities of Foundry • Foundry technology involves moulding, melting and casting of parts; • that is, producing castings by filling the prepared moulds with molten metal alloys.
- 3. Metal casting processes • Steps: - Making mould cavity. - Material is first liquefied by properly heating it in a suitable furnace. - Liquid is poured into a prepared mould cavity - allowed to solidify. - product is taken out of the mould cavity, trimmed and made to shape.
- 4. The Basic steps in making sand castings • (i) Pattern making, • (ii) Core making, • (iii) Moulding, • (iv) Melting and pouring, • (v) Cleaning.
- 6. Important casting terms • Flask • Pattern • Moulding sand • Core • Pouring basin • Sprue • Runner
- 7. • Gate • Chaplets • Riser • Vent
- 8. Applications of foundry • Foundries are used in producing metal products for the railroad, motor parts, pipes, engine components, and other heavy machines are made of casting. • Almost all metal parts are made of casting.
- 9. Some products of Foundry shop
- 10. DEMO VIDEO FOR FOUNDRY • Foundary workshop training _ Sand casting _ Foundry casting Processes _ Foundry Technology.mp4