This document provides information about flat jet nozzles. Flat jet nozzles work on the impact principle and provide wide, even coverage with a flat spray pattern and low risk of clogging. They are available in sizes from 1/4" to 3/4" threaded connection with spray angles from 90 to 140 degrees. Application include gravel washing, rinsing, and controlling foam. Flow rates range from 2 to 250 LPM at 2 kg/cm2 pressure or as specified. Materials include stainless steel, brass, PVC, and other plastics.

1. G
L2
L1
HEX
Wide angle flat jet with sharply defined spray pattern. It is available with a threaded connection and for
the sizes from 1/4" to 3/4" as a nozzle assure wide coverage and even distribution.
Characteristics : Flat jet nozzle work on the impact principle, with a high efficiency and an low
plugging risks.
Design : One piece construction, non clogging type
Accurate machined to provide very high impact.
Application : Gravel Washing, Ringing, Control of Foam etc.
Flow rate : 2 LPM to 250 LPM
Pressure : 2.0 Kg/cm² or specified
Spray angle : 90° to 140°
End connection : 1/4" to 3/4 “ BSP/BSPT/NPT(m/f)
M.O.C. : S.S. 316, 304, Brass, PVC, PVCF, PP, Teflon
Flood Jet Nozzles
G L1 L2 HEX
1/4 24 10 14 mm
3/8 42 10.5 19 mm
½ 50 13 22 mm
3/4 72 16 32 mm
ABHIIndustrial Corporation
ABHI
Abhi Industrial Corporation
D-126, sector -7, Noida - 201 301
Uttar Pradesh, India
Mobile : +91-9818679021, 9910940535
e-mail : abhinavmishra13@gmail.com
abhiindustrialcorporation@gmail.com
info@abhiindustrial.com
Web : abhiindustrial.com