Feeler gauge
•
0 likes•106 views
The document describes a 32-blade feeler gauge set made of stainless steel. The feeler gauge blades measure thicknesses and gaps in both metric and imperial units, ranging from 0.0015 inches to 0.035 inches and 0.04 mm to 0.88 mm. The sizes are etched onto the blades for easy identification. The feeler gauge set can be used to measure gap widths and thicknesses for applications like machinery maintenance and repair.
Report
Share
Report
Share
Download to read offline
Recommended
Dial gauge
TYPES OF DIAL GAUGE
HOW TO USE DIAL GAUGE Mass production
Check the flatness of component
Check the roundness
Use at a temperature range from 10 °F to 170 °F (-12 °C to 75 °C)
Least count is 0.01 mm
CALIBRATION OF DIAL GAUGE
CALIBRATION CERTIFICATE
MAKE , RANGE AND PRICE
DIAL GAUGE AT NUV WORKSHOP
ERROR IN DIAL GAUGE
When we measuring the amplitudes and vibration, the dial gauge is found to be two major errors,
At low frequency
Due to the weakness of hairspring which takes up backlash in the mechanism.
At high frequency
It is produced by jumping of the gauge finger. It is postponed by using stronger gauge spring.
Error = Actual reading – Instrumental reading
% Error = Error x 100 / Actual reading
ADVANTAGE Accuracy is as high as 0.01 mm.
Operating Range up to 100 mm
Easy to Read
Quick in use if only comparison is required.
LIMITATIONS Does not Measure but will only indicate differences in size.
Easily damaged if mishandled.
Loss of Accuracy through number of moving parts.
Metrology
Metrology is the science of measurement and involves establishing measurement units, developing measurement methods, analyzing measurement errors, and ensuring accuracy. Key aspects of metrology include linear and angular measurements using various instruments ranging from simple rules and calipers to high-precision gauges, comparators, and microscopes. Metrology allows for planning, commercial exchange, and quality control through precise quantification.
Using gages
This document provides guidance on proper gage use and calibration procedures. It discusses signing gages in and out, annual calibration checks, field verification techniques, specifications, tolerances, care instructions, and proper use of calipers, micrometers, gage blocks, and pin gages. Gages must be tracked by asset number, calibrated yearly, and verified in the field before use to ensure accurate measurements. Users should clean and store gages properly, take care not to damage devices, and return any dropped gages for recalibration.
Uint 2 linear only
This document provides information about linear and angular measurement devices. It discusses various tools used for linear measurement such as vernier calipers, micrometers, slip gauges, comparators and tools for angular measurement including protractors, spirit levels, clinometers and sine bars. It also explains the working principles, applications and sources of error for some of these measurement devices.
Machine shop notes.pdf
This note I prepared only for my students who are studying in Mechanical Engineering branch at Govt. Polytechnic Kothamangalam in Kerala
Feeler guage
A feeler gauge is a hand-held precision measuring tool used to measure small gaps. It contains several thin metal strips or "leaves" of specified thicknesses, labeled in millimeters or inches. Feeler gauges can measure gaps from 0.02mm to 5.08mm and are useful in tight spaces where other tools won't fit. The most common types are straight, tapered, and offset feeler gauges.
Welding gauge equipments
The document describes various weld inspection gauges and tool kits. Key details include:
- Pocket and bridge cam gauges measure weld parameters like angle of preparation, excess weld metal, undercut depth, pitting depth, fillet weld throat size, and misalignment.
- Adjustable and automatic weld gauges measure fillet weld throat thickness and leg size.
- Combo gauges measure butt weld height, fillet weld leg and throat size, and angle of preparation.
- Skew-T, socket, and mini fillet gauges check fillet welds on pipes and skewed members.
- Tool kits include essential gauges
248608510 calibration-of-dial-gauge
The document describes calibrating a dial gauge using a calibration tester and computerized calibrator. It provides background on dial gauges and their applications. The experimental procedure for manual and computerized calibration is described. Test results are shown in a table with go, return, limit, and average readings recorded at 0.1mm increments from 0-1.5mm. The data will be analyzed to determine errors at each reading point and compare the accuracy of the two calibration methods.
Recommended
Dial gauge
TYPES OF DIAL GAUGE
HOW TO USE DIAL GAUGE Mass production
Check the flatness of component
Check the roundness
Use at a temperature range from 10 °F to 170 °F (-12 °C to 75 °C)
Least count is 0.01 mm
CALIBRATION OF DIAL GAUGE
CALIBRATION CERTIFICATE
MAKE , RANGE AND PRICE
DIAL GAUGE AT NUV WORKSHOP
ERROR IN DIAL GAUGE
When we measuring the amplitudes and vibration, the dial gauge is found to be two major errors,
At low frequency
Due to the weakness of hairspring which takes up backlash in the mechanism.
At high frequency
It is produced by jumping of the gauge finger. It is postponed by using stronger gauge spring.
Error = Actual reading – Instrumental reading
% Error = Error x 100 / Actual reading
ADVANTAGE Accuracy is as high as 0.01 mm.
Operating Range up to 100 mm
Easy to Read
Quick in use if only comparison is required.
LIMITATIONS Does not Measure but will only indicate differences in size.
Easily damaged if mishandled.
Loss of Accuracy through number of moving parts.
Metrology
Metrology is the science of measurement and involves establishing measurement units, developing measurement methods, analyzing measurement errors, and ensuring accuracy. Key aspects of metrology include linear and angular measurements using various instruments ranging from simple rules and calipers to high-precision gauges, comparators, and microscopes. Metrology allows for planning, commercial exchange, and quality control through precise quantification.
Using gages
This document provides guidance on proper gage use and calibration procedures. It discusses signing gages in and out, annual calibration checks, field verification techniques, specifications, tolerances, care instructions, and proper use of calipers, micrometers, gage blocks, and pin gages. Gages must be tracked by asset number, calibrated yearly, and verified in the field before use to ensure accurate measurements. Users should clean and store gages properly, take care not to damage devices, and return any dropped gages for recalibration.
Uint 2 linear only
This document provides information about linear and angular measurement devices. It discusses various tools used for linear measurement such as vernier calipers, micrometers, slip gauges, comparators and tools for angular measurement including protractors, spirit levels, clinometers and sine bars. It also explains the working principles, applications and sources of error for some of these measurement devices.
Machine shop notes.pdf
This note I prepared only for my students who are studying in Mechanical Engineering branch at Govt. Polytechnic Kothamangalam in Kerala
Feeler guage
A feeler gauge is a hand-held precision measuring tool used to measure small gaps. It contains several thin metal strips or "leaves" of specified thicknesses, labeled in millimeters or inches. Feeler gauges can measure gaps from 0.02mm to 5.08mm and are useful in tight spaces where other tools won't fit. The most common types are straight, tapered, and offset feeler gauges.
Welding gauge equipments
The document describes various weld inspection gauges and tool kits. Key details include:
- Pocket and bridge cam gauges measure weld parameters like angle of preparation, excess weld metal, undercut depth, pitting depth, fillet weld throat size, and misalignment.
- Adjustable and automatic weld gauges measure fillet weld throat thickness and leg size.
- Combo gauges measure butt weld height, fillet weld leg and throat size, and angle of preparation.
- Skew-T, socket, and mini fillet gauges check fillet welds on pipes and skewed members.
- Tool kits include essential gauges
248608510 calibration-of-dial-gauge
The document describes calibrating a dial gauge using a calibration tester and computerized calibrator. It provides background on dial gauges and their applications. The experimental procedure for manual and computerized calibration is described. Test results are shown in a table with go, return, limit, and average readings recorded at 0.1mm increments from 0-1.5mm. The data will be analyzed to determine errors at each reading point and compare the accuracy of the two calibration methods.
Kurt pmi 10 08
This document summarizes various precision measuring instruments including outside micrometers, dial calipers, test indicators, dial indicators, electronic dial indicators, magnetic bases, and height gages. It provides specifications and features for different models ranging in measurement capacities from 0-1 inches to 0-12 inches and graduation precision from 0.0001 to 0.001 inches.
UNIT-I PPT EMM.ppt
The document discusses various topics related to metrology. It begins by defining metrology as the science of measurement and dividing it into two main types - industrial metrology and medical metrology. Some key points covered include the importance of length and time measurements, analyzing measurement errors, gauges design and manufacturing, and industrial inspection. It also discusses types of metrology like scientific, industrial, legal and fundamental metrology. Specific measuring instruments like vernier calipers, micrometers, and slip gauges are explained in detail. The document concludes by covering various other metrology topics such as measurement principles, linear measuring instruments, and applications of limit gauges.
Fitting shop
The document discusses tools used in a fitting shop. It describes various measuring tools like calipers and micrometers used to measure dimensions accurately. Marking and layout tools like scriber, center punch and surface plate are used for marking out on workpieces. Holding tools like vices and clamps are used to securely hold workpieces during operations. Cutting tools include files for shaping, hacksaws for cutting, drills for making holes and taps and dies for cutting threads. Measuring, layout, holding, cutting and other operations are performed in the fitting shop to complete projects to the required accuracy and specifications.
S3-S6 Mech.Engg.-Technical Education Kerala-Polytechnic-Machine Shop notes
S3-S6 Mech.Engg.-Technical Education Kerala-Polytechnic-Machine Shop notesDepartment of Technical Education, Kerala, India
This notes may be helpful to the students studying in mechanical engineering branches of polytechnic colleges in Kerala state under technical education.Bore gauges
The document is a catalog from Baty International, a manufacturer of precision measurement instruments since 1932. It provides information on various types of bore gauges and micrometers that Baty produces, including analog bore micrometers, digital bore gauges, bore comparators, telescopic gauges, and electronic plug gauges. It describes the features and specifications of these different products for measuring internal diameters and bores.
UNIT II LINEAR AND ANGULAR MEASUREMENTS
1. The document discusses various types of linear and angular measurement instruments. It provides lists of common measuring devices along with their functions such as calipers, micrometers, height gauges, slip gauges, and comparators.
2. Key linear measurement instruments described include vernier calipers, micrometers, height gauges, depth gauges, and slip gauges. The document explains the basic principles, components, and uses of each tool.
3. Measurement techniques like vernier scales, least count calculations, and wringing of slip gauges are outlined. Different types of comparators - mechanical, electrical, and optical - are also introduced along with their working principles.
Mechanical Engineering Technical Interview Q & A Metrology and precision inst...
This document discusses various metrology and precision instruments used for measurement and inspection. It provides definitions and explanations of nominal size, actual size, basic size, fits, limits, tolerance, allowance and describes instruments like vernier calipers, micrometers, gauges, sine bars and templates. Key points covered are the working principles and uses of these instruments as well as concepts like interchangeability, selective and non-selective assembly, lapping and honing processes.
IIW V1 Ultrasonic calibartion block
APPLICATION:
Used for Calibration of Shear and Longitudinal Transducer and Verification of shear wave exit point and refracted angel, Can also be used for resolution and sensitivity checking.
SPECIFICATIONS: ✓ ASTM E164,MIL-STD-2154, IS4904
INCH VERSION DIMENSIONS: ✓ 1.0” x 4.0” x 12.0” With 4” Radious, 2.0” and 0.060” Diameter Hole, 0.240”deep x 0.080” wide slot and 1.0” Radious slot x 0.060” deep x 0.120” wide
METRIC VERSION DIMENSIONS: ✓ 25.0mm x 100mm x 300mm (T x L x H ) With 100mm Radious, 50mm and 1.5mm Diameter Hole, 6.0mm deep x 2.0mm wide slot and 25.0mm Radious slot x 1.5mm deep x 3.0mm wide
MATERIAL: ✓ Carbon steel, Stainless Steel, Aluminum etc.
005 measurement
This document discusses various tools used for measurement in both metric and English systems. It describes steel rules, outside and inside calipers, combination squares, micrometers, vernier calipers, and bevel protractors. It also provides examples of how to take measurements using a micrometer and vernier caliper in metric units. Finally, it briefly mentions other measuring tools like steel tapes, drill gages, thickness gages, and angle gages.
Basic Metrology Practices Iss1.ppt
The document provides an overview of basic metrology practices and measuring instruments. It discusses principles of measurement using metric and imperial systems. It then describes various measuring tools including rules, calipers, gauges, micrometers, vernier calipers, and height gauges. For each tool, it explains how to use and read the tool, with pictures to illustrate parts and scales. The document aims to teach proper use and reading of common measurement devices.
Bearing & Tools Centre, Ahmedabad, Outside Micrometer
Dealer and Supplier of a wide assortment of precision engineered testing and measuring equipment such as Outside Micrometer, Digimatic Vernier Calipers- Insize And Mituoyo, Screw Thread Micrometer -Mitutoyo, Vernier Caliper - 0.02 MM, Dial Depth Gauge, Plunger Dial Gauge, Lever Dial Gauge, Plunger Dial Gauge1, Angle Plates, Aangular Machine, Bevelled Edge Steel, Machinist Square Workshop, Brass Caliper and Depth Gauge, Signature Series Rules, Stainless Steel Rules Model 201, Stainless Steel Rules Model 401.
Screw pitch gauge
Features: ➢ Fit for : Whitworth 55-Degree Threads & Metric 60-Degree Threads ➢ Material : Stainless Steel ➢ Size(Closed) : ~2 5/8 x 1/2 x 11/16inch(LWH) ➢ 52 folding leaves The leaves are individually stamped with accurately formed thread profiles Measures screw thread pitches between 0.25 6.0mm and 4 - 62 BSW(British Standard Whitworth) ➢ Package Content : 1 x Screw Pitch Gauge
Inch 55 ° specifications:
➢ 4G,4-1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G , 30G, 32G, 36G, 40G, 48G, 60G, 62G
Metric 60 ° specifications:
➢ 0.25,0.3,0.35,0.4,0.45,0.5,0.6,0.7,0.75,0.8,0.9,1.0,1.25,1.5,1.75,2.0, 2.5,3.0,3.5,4.0,4.5,5.0,5.5 6.0
Bearing tools-centre
Bearing & Tools Centre is a supplier and distributor of precision measuring and testing equipment. They have been in business since 1981 and offer calibration services in addition to a wide range of products. Their product catalog includes micrometers, calipers, gauges, microscopes, hardness testers, and more from reputable brands at discounted prices. They also provide maintenance, repair, and ISO calibration for the equipment.
UNIT II MEASUREMENT OF LINEAR, ANGULAR DIMENSIONS, ASSEMBLY AND TRANSMISSION ...
This document provides information on various measurement instruments and gauges used for linear, angular, and dimensional measurements. It discusses different types of measuring instruments like vernier calipers, micrometers, slip gauges, comparators, as well as angular measuring instruments. It also covers limit gauges and their use in checking workpiece tolerances, and concepts of interchangeability and selective assembly in manufacturing.
fititng.pdf
The document provides information about various tools used in a fitting shop for manufacturing processes. It describes marking, measuring, cutting, threading and finishing tools that are commonly used. These include tools like the bench vice, angle plate, try square, calipers, micrometers, hacksaw, taps, dies, files and more. Details are given on how each tool is used and specifications like material, sizes and accuracy levels. The fitting shop tools are important for tasks like layout work, machining, inspection and assembly of components.
Measuring Pin
GEETA ENGINEERING WORK is leading manufacturing Co. in India, Providing measuring instrument across the global.
We are providing instrument of MEASURING PIN SET, LOOSE PIN, THREAD MEASURING WIRES, GEAR MEASURING WIRES, REVERSIBLE PLUG GAUGE, DOWEL PIN, CENTERLESS GRINDING SERVICE, TRAUB MACHINE JOB WORK, COPPER WASHER.
Measuring Pins are widely used for CHECKING CENTER DISTANCES, GROOVE DIMENSIONS,BORE DIAMETER,GEAR MEASURMENT,
DIAL GAUGE SETTING, STRAIGHTNESS OF HOLES, PARALLEL GUIDES, DOVETAIL GUID, DEPTH OF PROFILES & ANGLES, and many others.
We also Provide 50 MM TO 300 MM DIA COPPER & ALLUMINIUM WASHER/SEAL Ring. (STD SIZES).
We have team of highly trained staff with experience over 20 Years to provide accurate measuring instrument to fullest satisfaction of clients. Our more than 850 satisfied industrial clients & traders are our real achievements. By virtue of our experienced team of engineers, technicians, support staff and world class MACHINERIES & MEASURING INSTRUMENTS, We are able to build a large number of regular customers.
WE ARE ALWAYS HERE TO HELP YOU !
Measuring Pin Price List
GEETA ENGINEERING WORK is leading manufacturing Co. in India, Providing measuring instrument across the global.
We are providing instrument of MEASURING PIN SET, LOOSE PIN, THREAD MEASURING WIRES, GEAR MEASURING WIRES, REVERSIBLE PLUG GAUGE, DOWEL PIN, CENTERLESS GRINDING SERVICE, TRAUB MACHINE JOB WORK.
Measuring Pins are widely used for CHECKING CENTER DISTANCES, GROOVE DIMENSIONS,BORE DIAMETER,GEAR MEASURMENT,
DIAL GAUGE SETTING, STRAIGHTNESS OF HOLES, PARALLEL GUIDES, DOVETAIL GUID, DEPTH OF PROFILES & ANGLES, and many others.
We also Provide 50 MM TO 300 MM DIA COPPER & ALLUMINIUM WASHER/SEAL Ring. (STD SIZES).
We have team of highly trained staff with experience over 20 Years to provide accurate measuring instrument to fullest satisfaction of clients. Our more than 850 satisfied industrial clients & traders are our real achievements. By virtue of our experienced team of engineers, technicians, support staff and world class MACHINERIES & MEASURING INSTRUMENTS, We are able to build a large number of regular customers.
WE ARE ALWAYS HERE TO HELP YOU !
Presentation1
This document discusses various linear and angular measurement instruments. It describes scales, calipers, vernier calipers, micrometers, slip gauges, sine bars, bevel protractors, and auto-collimators. Linear measuring instruments are classified as direct or indirect and graduated or non-graduated. Precision is increased with vernier scales and indicators that allow for smaller unit measurements. Angular instruments like protractors and auto-collimators use optical principles to measure small angles. Accessories aid in applications like marking dimensions. Sources of error are also discussed to ensure accuracy.
Gal
The document provides information about various welding gauges used to measure aspects of welds such as internal alignment, misalignment, fit-up gap, bevel preparation, crown height, fillet size, scribe lines, root gap, and undercut depth. It describes gauges that measure these items in both standard and metric units. Gauges are made of durable stainless steel and are designed for ease of use and accuracy down to 1/32 of an inch or less.
Unit II
Linear and angular measurements are fundamental concepts in metrology. There are several precision tools used for linear measurements, including rulers, vernier calipers, and micrometers. Vernier calipers use a vernier scale to measure lengths with an accuracy of 0.02mm or better. Micrometers can measure with an accuracy of 0.01mm or better using a screw mechanism. Other important linear measuring tools discussed include slip gauges, height gauges, and depth gauges. Angular measurements are also important and were historically used for navigation.
Radiography Film Viewer
Features:
High Luminance.
Energy Saving.
Viewing Area: 12”x4”.
Adjustable Shutter for Viewing Area.
Electronic Brightness Control
Specification:
View Film Density up to 5.0 Density.
Input Voltage: 230Volt (±5%).
Power Consumption: 160W approx.
Heavy Aluminum heat sink.
Cooling Fan: 2 Nos.
Plug in Foot Switch.
Foot Switch & foot Switch Cable is shock Proof.
Mini lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
More Related Content
Similar to Feeler gauge
Kurt pmi 10 08
This document summarizes various precision measuring instruments including outside micrometers, dial calipers, test indicators, dial indicators, electronic dial indicators, magnetic bases, and height gages. It provides specifications and features for different models ranging in measurement capacities from 0-1 inches to 0-12 inches and graduation precision from 0.0001 to 0.001 inches.
UNIT-I PPT EMM.ppt
The document discusses various topics related to metrology. It begins by defining metrology as the science of measurement and dividing it into two main types - industrial metrology and medical metrology. Some key points covered include the importance of length and time measurements, analyzing measurement errors, gauges design and manufacturing, and industrial inspection. It also discusses types of metrology like scientific, industrial, legal and fundamental metrology. Specific measuring instruments like vernier calipers, micrometers, and slip gauges are explained in detail. The document concludes by covering various other metrology topics such as measurement principles, linear measuring instruments, and applications of limit gauges.
Fitting shop
The document discusses tools used in a fitting shop. It describes various measuring tools like calipers and micrometers used to measure dimensions accurately. Marking and layout tools like scriber, center punch and surface plate are used for marking out on workpieces. Holding tools like vices and clamps are used to securely hold workpieces during operations. Cutting tools include files for shaping, hacksaws for cutting, drills for making holes and taps and dies for cutting threads. Measuring, layout, holding, cutting and other operations are performed in the fitting shop to complete projects to the required accuracy and specifications.
S3-S6 Mech.Engg.-Technical Education Kerala-Polytechnic-Machine Shop notes
S3-S6 Mech.Engg.-Technical Education Kerala-Polytechnic-Machine Shop notesDepartment of Technical Education, Kerala, India
This notes may be helpful to the students studying in mechanical engineering branches of polytechnic colleges in Kerala state under technical education.Bore gauges
The document is a catalog from Baty International, a manufacturer of precision measurement instruments since 1932. It provides information on various types of bore gauges and micrometers that Baty produces, including analog bore micrometers, digital bore gauges, bore comparators, telescopic gauges, and electronic plug gauges. It describes the features and specifications of these different products for measuring internal diameters and bores.
UNIT II LINEAR AND ANGULAR MEASUREMENTS
1. The document discusses various types of linear and angular measurement instruments. It provides lists of common measuring devices along with their functions such as calipers, micrometers, height gauges, slip gauges, and comparators.
2. Key linear measurement instruments described include vernier calipers, micrometers, height gauges, depth gauges, and slip gauges. The document explains the basic principles, components, and uses of each tool.
3. Measurement techniques like vernier scales, least count calculations, and wringing of slip gauges are outlined. Different types of comparators - mechanical, electrical, and optical - are also introduced along with their working principles.
Mechanical Engineering Technical Interview Q & A Metrology and precision inst...
This document discusses various metrology and precision instruments used for measurement and inspection. It provides definitions and explanations of nominal size, actual size, basic size, fits, limits, tolerance, allowance and describes instruments like vernier calipers, micrometers, gauges, sine bars and templates. Key points covered are the working principles and uses of these instruments as well as concepts like interchangeability, selective and non-selective assembly, lapping and honing processes.
IIW V1 Ultrasonic calibartion block
APPLICATION:
Used for Calibration of Shear and Longitudinal Transducer and Verification of shear wave exit point and refracted angel, Can also be used for resolution and sensitivity checking.
SPECIFICATIONS: ✓ ASTM E164,MIL-STD-2154, IS4904
INCH VERSION DIMENSIONS: ✓ 1.0” x 4.0” x 12.0” With 4” Radious, 2.0” and 0.060” Diameter Hole, 0.240”deep x 0.080” wide slot and 1.0” Radious slot x 0.060” deep x 0.120” wide
METRIC VERSION DIMENSIONS: ✓ 25.0mm x 100mm x 300mm (T x L x H ) With 100mm Radious, 50mm and 1.5mm Diameter Hole, 6.0mm deep x 2.0mm wide slot and 25.0mm Radious slot x 1.5mm deep x 3.0mm wide
MATERIAL: ✓ Carbon steel, Stainless Steel, Aluminum etc.
005 measurement
This document discusses various tools used for measurement in both metric and English systems. It describes steel rules, outside and inside calipers, combination squares, micrometers, vernier calipers, and bevel protractors. It also provides examples of how to take measurements using a micrometer and vernier caliper in metric units. Finally, it briefly mentions other measuring tools like steel tapes, drill gages, thickness gages, and angle gages.
Basic Metrology Practices Iss1.ppt
The document provides an overview of basic metrology practices and measuring instruments. It discusses principles of measurement using metric and imperial systems. It then describes various measuring tools including rules, calipers, gauges, micrometers, vernier calipers, and height gauges. For each tool, it explains how to use and read the tool, with pictures to illustrate parts and scales. The document aims to teach proper use and reading of common measurement devices.
Bearing & Tools Centre, Ahmedabad, Outside Micrometer
Dealer and Supplier of a wide assortment of precision engineered testing and measuring equipment such as Outside Micrometer, Digimatic Vernier Calipers- Insize And Mituoyo, Screw Thread Micrometer -Mitutoyo, Vernier Caliper - 0.02 MM, Dial Depth Gauge, Plunger Dial Gauge, Lever Dial Gauge, Plunger Dial Gauge1, Angle Plates, Aangular Machine, Bevelled Edge Steel, Machinist Square Workshop, Brass Caliper and Depth Gauge, Signature Series Rules, Stainless Steel Rules Model 201, Stainless Steel Rules Model 401.
Screw pitch gauge
Features: ➢ Fit for : Whitworth 55-Degree Threads & Metric 60-Degree Threads ➢ Material : Stainless Steel ➢ Size(Closed) : ~2 5/8 x 1/2 x 11/16inch(LWH) ➢ 52 folding leaves The leaves are individually stamped with accurately formed thread profiles Measures screw thread pitches between 0.25 6.0mm and 4 - 62 BSW(British Standard Whitworth) ➢ Package Content : 1 x Screw Pitch Gauge
Inch 55 ° specifications:
➢ 4G,4-1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G , 30G, 32G, 36G, 40G, 48G, 60G, 62G
Metric 60 ° specifications:
➢ 0.25,0.3,0.35,0.4,0.45,0.5,0.6,0.7,0.75,0.8,0.9,1.0,1.25,1.5,1.75,2.0, 2.5,3.0,3.5,4.0,4.5,5.0,5.5 6.0
Bearing tools-centre
Bearing & Tools Centre is a supplier and distributor of precision measuring and testing equipment. They have been in business since 1981 and offer calibration services in addition to a wide range of products. Their product catalog includes micrometers, calipers, gauges, microscopes, hardness testers, and more from reputable brands at discounted prices. They also provide maintenance, repair, and ISO calibration for the equipment.
UNIT II MEASUREMENT OF LINEAR, ANGULAR DIMENSIONS, ASSEMBLY AND TRANSMISSION ...
This document provides information on various measurement instruments and gauges used for linear, angular, and dimensional measurements. It discusses different types of measuring instruments like vernier calipers, micrometers, slip gauges, comparators, as well as angular measuring instruments. It also covers limit gauges and their use in checking workpiece tolerances, and concepts of interchangeability and selective assembly in manufacturing.
fititng.pdf
The document provides information about various tools used in a fitting shop for manufacturing processes. It describes marking, measuring, cutting, threading and finishing tools that are commonly used. These include tools like the bench vice, angle plate, try square, calipers, micrometers, hacksaw, taps, dies, files and more. Details are given on how each tool is used and specifications like material, sizes and accuracy levels. The fitting shop tools are important for tasks like layout work, machining, inspection and assembly of components.
Measuring Pin
GEETA ENGINEERING WORK is leading manufacturing Co. in India, Providing measuring instrument across the global.
We are providing instrument of MEASURING PIN SET, LOOSE PIN, THREAD MEASURING WIRES, GEAR MEASURING WIRES, REVERSIBLE PLUG GAUGE, DOWEL PIN, CENTERLESS GRINDING SERVICE, TRAUB MACHINE JOB WORK, COPPER WASHER.
Measuring Pins are widely used for CHECKING CENTER DISTANCES, GROOVE DIMENSIONS,BORE DIAMETER,GEAR MEASURMENT,
DIAL GAUGE SETTING, STRAIGHTNESS OF HOLES, PARALLEL GUIDES, DOVETAIL GUID, DEPTH OF PROFILES & ANGLES, and many others.
We also Provide 50 MM TO 300 MM DIA COPPER & ALLUMINIUM WASHER/SEAL Ring. (STD SIZES).
We have team of highly trained staff with experience over 20 Years to provide accurate measuring instrument to fullest satisfaction of clients. Our more than 850 satisfied industrial clients & traders are our real achievements. By virtue of our experienced team of engineers, technicians, support staff and world class MACHINERIES & MEASURING INSTRUMENTS, We are able to build a large number of regular customers.
WE ARE ALWAYS HERE TO HELP YOU !
Measuring Pin Price List
GEETA ENGINEERING WORK is leading manufacturing Co. in India, Providing measuring instrument across the global.
We are providing instrument of MEASURING PIN SET, LOOSE PIN, THREAD MEASURING WIRES, GEAR MEASURING WIRES, REVERSIBLE PLUG GAUGE, DOWEL PIN, CENTERLESS GRINDING SERVICE, TRAUB MACHINE JOB WORK.
Measuring Pins are widely used for CHECKING CENTER DISTANCES, GROOVE DIMENSIONS,BORE DIAMETER,GEAR MEASURMENT,
DIAL GAUGE SETTING, STRAIGHTNESS OF HOLES, PARALLEL GUIDES, DOVETAIL GUID, DEPTH OF PROFILES & ANGLES, and many others.
We also Provide 50 MM TO 300 MM DIA COPPER & ALLUMINIUM WASHER/SEAL Ring. (STD SIZES).
We have team of highly trained staff with experience over 20 Years to provide accurate measuring instrument to fullest satisfaction of clients. Our more than 850 satisfied industrial clients & traders are our real achievements. By virtue of our experienced team of engineers, technicians, support staff and world class MACHINERIES & MEASURING INSTRUMENTS, We are able to build a large number of regular customers.
WE ARE ALWAYS HERE TO HELP YOU !
Presentation1
This document discusses various linear and angular measurement instruments. It describes scales, calipers, vernier calipers, micrometers, slip gauges, sine bars, bevel protractors, and auto-collimators. Linear measuring instruments are classified as direct or indirect and graduated or non-graduated. Precision is increased with vernier scales and indicators that allow for smaller unit measurements. Angular instruments like protractors and auto-collimators use optical principles to measure small angles. Accessories aid in applications like marking dimensions. Sources of error are also discussed to ensure accuracy.
Gal
The document provides information about various welding gauges used to measure aspects of welds such as internal alignment, misalignment, fit-up gap, bevel preparation, crown height, fillet size, scribe lines, root gap, and undercut depth. It describes gauges that measure these items in both standard and metric units. Gauges are made of durable stainless steel and are designed for ease of use and accuracy down to 1/32 of an inch or less.
Unit II
Linear and angular measurements are fundamental concepts in metrology. There are several precision tools used for linear measurements, including rulers, vernier calipers, and micrometers. Vernier calipers use a vernier scale to measure lengths with an accuracy of 0.02mm or better. Micrometers can measure with an accuracy of 0.01mm or better using a screw mechanism. Other important linear measuring tools discussed include slip gauges, height gauges, and depth gauges. Angular measurements are also important and were historically used for navigation.
Similar to Feeler gauge (20)
S3-S6 Mech.Engg.-Technical Education Kerala-Polytechnic-Machine Shop notes
S3-S6 Mech.Engg.-Technical Education Kerala-Polytechnic-Machine Shop notes
Mechanical Engineering Technical Interview Q & A Metrology and precision inst...
Mechanical Engineering Technical Interview Q & A Metrology and precision inst...
Bearing & Tools Centre, Ahmedabad, Outside Micrometer
Bearing & Tools Centre, Ahmedabad, Outside Micrometer
UNIT II MEASUREMENT OF LINEAR, ANGULAR DIMENSIONS, ASSEMBLY AND TRANSMISSION ...
UNIT II MEASUREMENT OF LINEAR, ANGULAR DIMENSIONS, ASSEMBLY AND TRANSMISSION ...
More from Kirti NDT
Radiography Film Viewer
Features:
High Luminance.
Energy Saving.
Viewing Area: 12”x4”.
Adjustable Shutter for Viewing Area.
Electronic Brightness Control
Specification:
View Film Density up to 5.0 Density.
Input Voltage: 230Volt (±5%).
Power Consumption: 160W approx.
Heavy Aluminum heat sink.
Cooling Fan: 2 Nos.
Plug in Foot Switch.
Foot Switch & foot Switch Cable is shock Proof.
Mini lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Mini lemo to microdot cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Microdot to lemo Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Bnc to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to Microdot Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to LEMO Cable
Lemo to BNC Cable is types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to BNC CABLE
BNC to BNC cable is Cable required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Step wedge calibration block
APPLICATION: Used for Calibration of Ultrasonic Thickness Gauge, Straight Beam Thickness and Linearity Calibration etc.
SPECIFICATIONS: ✓ ASTM E797
Phased array type b block
APPLICATION: Used for beam Characterization and evaluation of system performance characteristics. Use it as baseline block to determine long-term instrument performance changes, generate DAC Curves and Evaluate linear/ Angular resolution , Focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonic capabilities
Phased array type a block
APPLICATION: Phased Array “Type A” Calibration Block is used during the initial setup and calibration of phased array Ultrasonic Unit , This Block can be used to perform task such as beam angle verification , Calibration for Wedge Delay, Sensitivity Calibration, Performing DAC/TCG AND more
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc.
INCH VERSION DIMENSIONS: ✓ 1.000” thick x 4.000” Hight x 12.00” Long ✓ 4.000” and 2.000” Radii, 19 through holes at 0.040” diameter , 1 through hole at0.080” Diameter , 4FBH at 0.80” diameter x0.080”, 0.160”, 0.235” and 0.315” deep, 4FBH at 0.157” Diameter x0.040”, 0.120”, 0.200” and 0.275” Deep, 3FBH at 0.080” Diameter x 0.120 Deep machined into the 2.000” Radious, 4EDM Notches at .004”, .008”,.012” and .016” deep x 0.20” wide x1.00” Long,
METRIC VERSION DIMENSIONS: ✓ 25.0mm thick x 100.0mm Hight x 300.0mm Long ✓ 100.0mm and 50.0mm Radii, 19 through holes at 1.0mm diameter, 1Through hole at 2.0mm diameter , 4FBH AT 2.0mm diameter x2.0mm, 4.0mm, 6.0mm an d8.0mm deep, 4FBH AT 4.0mm diameter x1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3FBH AT 2.0mm diameter x 3.0mmdeep machined into the 50mm radius, 4EDM Notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x25.0mm long
DAC Calibration blocks
This document describes ASME non-piping DAC blocks used for angle beam calibration. It provides specifications for carbon steel and stainless steel blocks in various dimensions from 1/2" to 3" thick. The blocks contain three or two side-drilled holes at varying diameters and depths located at 1/4, 1/2, and 3/4 of the thickness. They also contain two EDM notches that are 2% of the thickness deep by 1/4" wide and at least 1" long. Contact information is provided for Kirti NDT & Engineering Services.
AWS DSC Calibration Block
This document provides specifications for an AWS DSC BLOCK used to calibrate ultrasonic testing equipment. It describes the block's applications, dimensions for both inch and metric versions, materials it can be made from, and contact information for the manufacturer KIRTI NDT & ENGINEERING SERVICES.
AWS DS Calibration block
This document provides specifications for an AWS-DS calibration block used for straight beam distance, horizontal linearity, and sensitivity calibration. The block is 6 inches by 4 inches by 2 inches made of materials like carbon steel, stainless steel, or aluminum. It can be used for both inch and metric calibration requirements as the AWS standard does not specify a separate metric version.
AWS sensitivity block
APPLICATION: Sensitivity Block is AWS Type block also called SC Block used for sensitivity Calibration,
SPECIFICATIONS: ✓ ASTM E164, AWS-D1.1
INCH VERSION DIMENSIONS: ✓ 3.00” x 1.25” x 0.905” (L x W x H), 0.0625”Hole
METRIC VERSION DIMENSIONS: ✓ 75mm x 32mm x 22.6 (T x L x H), 1.6mm Hole
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc
Ball head telescopic gauge
Features: ➢ Used with an outside micrometer for measuring inside diameter of bores. ➢ Extra long for gaging deep and shallow holes, slots and similar work pieces. ➢ Gaging surface is fully hardened to insure long tool life. ➢ 4 sizes of gages are supplied in a fitted case. ➢ Spherical measuring faces hardened, Tool adjustment shaft Satin chrome finish ➢ Measuring Range 3-13mm (1/8"-1/2")
Instructions: ➢ A spring piston that telescopes in the bore enables internal diameter detection, which is measured with a micrometer or caliper. (Knurled locking device at the end.)
Using method: ➢ 1 Loosen the inner hole gauge and place it in the object to be measured. ➢ 2. Tighten clockwise and make one rotation to ensure tightening. ➢ 3. After the measurement is correct, tighten the lock clockwise. ➢ 4. After locking, measure the inner diameter data with a caliper.
Type A B C D ➢ Measuring range (Inch) :1/8"-1/5“, 1/5"-3/10" , 3/10" -2/5" , 2/5"-1/2" ➢ Measuring range (mm) : 3-5mm ,5-7.5mm, 7.5-10mm ,10-13mm ➢ Head diameter: 5mm, 5mm, 5mm, 5mm. ➢ Ball diameter: 3mm, 5mm, 7.5mm, 10mm. ➢ Length: 76mm, 79mm, 88mm, 92mm.
http
Drill gauge
Features: ➢ IDENTIFIES DRILL BITS SIZES- Helpful when working with older, unmarked drill bits and bits too small to fit diameter markings ➢ 29 MEASURING HOLES- Identified drill bits from 1/16 Inch to 1/2 Inch in 1/64th increments ➢ ETCHED MARKINGS- Black graduations to give high contrast and will not wear off ➢ NO MATH- Shows drill sizes in both inches and decimal equivalents ➢ DURABLE- Made from heavy duty, rustproof stainless steel ➢ 2-3/8" x 6-3/4" overall
http
Telescopic gauge
Features: ➢ Spring loaded with locking knurled knob. Range: 5/16" - 6" (8mm to 150mm). ➢ Stainless Steel Construction, Titanium coating finish. ➢ Constant spring tension gives uniform contact pressure. ➢ Double action rigid handle with self centering feature for quick checking of holes, slots and recess up to 6" deep. ➢ Contact points are hardened tool steel and precision ground in the end measuring radius. ➢ Gage expands in a hole to be measured (locks in place and then removed to determine final hole size using a micrometer or calipers).
More from Kirti NDT (20)
Recently uploaded
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Feeler gauge
- 1. KIRTI NDT & ENGINEERING SERVICES FEELER GAUGE FEELER GAUGE-32BLADES http://www.kirtindt.in 1 Features: ➢ Feeler gauge Set: Made of stainless steel, each measuring feeler gauge has 32 blades thickness; Foldable feeler gauges, easy and convenient to take and store ➢ Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification ➢ Application: Stainless Steel Metric Master Feeler Gauge SET 32-Piece Blade Dual Marked Metric /Imperial Reading Combination Tool for Measuring Gap Width / Thickness imperial /metric sizes ➢ Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035 ➢ metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88 FEELERGAUGE
- 2. KIRTI NDT & ENGINEERING SERVICES Add: 707/B-Wing, Shree Sai Raj Park, Rajaji Path Road, Dombivali East, Thane, Maharashtra India-421201 Tel: +918779246578, +917718917422 What Sapp:+918779246578 Email: kirtindt@yahoo.in, kirti@kirtindt.in Website: www.kirtindt.in