BNC to LEMO Cable
•
0 likes•18 views
Lemo to BNC Cable is types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths. Dual Cables with two connectors at each end to fit dual crystal transducer are also available. Generally all cables are with 2 meters length.
Report
Share
Report
Share
Download to read offline
Recommended
Radiography Film Viewer
Features:
High Luminance.
Energy Saving.
Viewing Area: 12”x4”.
Adjustable Shutter for Viewing Area.
Electronic Brightness Control
Specification:
View Film Density up to 5.0 Density.
Input Voltage: 230Volt (±5%).
Power Consumption: 160W approx.
Heavy Aluminum heat sink.
Cooling Fan: 2 Nos.
Plug in Foot Switch.
Foot Switch & foot Switch Cable is shock Proof.
Mini lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Mini lemo to microdot cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Microdot to lemo Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Bnc to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to Microdot Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Recommended
Radiography Film Viewer
Features:
High Luminance.
Energy Saving.
Viewing Area: 12”x4”.
Adjustable Shutter for Viewing Area.
Electronic Brightness Control
Specification:
View Film Density up to 5.0 Density.
Input Voltage: 230Volt (±5%).
Power Consumption: 160W approx.
Heavy Aluminum heat sink.
Cooling Fan: 2 Nos.
Plug in Foot Switch.
Foot Switch & foot Switch Cable is shock Proof.
Mini lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Mini lemo to microdot cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Microdot to lemo Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Bnc to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to Microdot Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to BNC CABLE
BNC to BNC cable is Cable required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Step wedge calibration block
APPLICATION: Used for Calibration of Ultrasonic Thickness Gauge, Straight Beam Thickness and Linearity Calibration etc.
SPECIFICATIONS: ✓ ASTM E797
Phased array type b block
APPLICATION: Used for beam Characterization and evaluation of system performance characteristics. Use it as baseline block to determine long-term instrument performance changes, generate DAC Curves and Evaluate linear/ Angular resolution , Focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonic capabilities
Phased array type a block
APPLICATION: Phased Array “Type A” Calibration Block is used during the initial setup and calibration of phased array Ultrasonic Unit , This Block can be used to perform task such as beam angle verification , Calibration for Wedge Delay, Sensitivity Calibration, Performing DAC/TCG AND more
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc.
INCH VERSION DIMENSIONS: ✓ 1.000” thick x 4.000” Hight x 12.00” Long ✓ 4.000” and 2.000” Radii, 19 through holes at 0.040” diameter , 1 through hole at0.080” Diameter , 4FBH at 0.80” diameter x0.080”, 0.160”, 0.235” and 0.315” deep, 4FBH at 0.157” Diameter x0.040”, 0.120”, 0.200” and 0.275” Deep, 3FBH at 0.080” Diameter x 0.120 Deep machined into the 2.000” Radious, 4EDM Notches at .004”, .008”,.012” and .016” deep x 0.20” wide x1.00” Long,
METRIC VERSION DIMENSIONS: ✓ 25.0mm thick x 100.0mm Hight x 300.0mm Long ✓ 100.0mm and 50.0mm Radii, 19 through holes at 1.0mm diameter, 1Through hole at 2.0mm diameter , 4FBH AT 2.0mm diameter x2.0mm, 4.0mm, 6.0mm an d8.0mm deep, 4FBH AT 4.0mm diameter x1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3FBH AT 2.0mm diameter x 3.0mmdeep machined into the 50mm radius, 4EDM Notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x25.0mm long
IIW V1 Ultrasonic calibartion block
APPLICATION:
Used for Calibration of Shear and Longitudinal Transducer and Verification of shear wave exit point and refracted angel, Can also be used for resolution and sensitivity checking.
SPECIFICATIONS: ✓ ASTM E164,MIL-STD-2154, IS4904
INCH VERSION DIMENSIONS: ✓ 1.0” x 4.0” x 12.0” With 4” Radious, 2.0” and 0.060” Diameter Hole, 0.240”deep x 0.080” wide slot and 1.0” Radious slot x 0.060” deep x 0.120” wide
METRIC VERSION DIMENSIONS: ✓ 25.0mm x 100mm x 300mm (T x L x H ) With 100mm Radious, 50mm and 1.5mm Diameter Hole, 6.0mm deep x 2.0mm wide slot and 25.0mm Radious slot x 1.5mm deep x 3.0mm wide
MATERIAL: ✓ Carbon steel, Stainless Steel, Aluminum etc.
DAC Calibration blocks
This document describes ASME non-piping DAC blocks used for angle beam calibration. It provides specifications for carbon steel and stainless steel blocks in various dimensions from 1/2" to 3" thick. The blocks contain three or two side-drilled holes at varying diameters and depths located at 1/4, 1/2, and 3/4 of the thickness. They also contain two EDM notches that are 2% of the thickness deep by 1/4" wide and at least 1" long. Contact information is provided for Kirti NDT & Engineering Services.
AWS DSC Calibration Block
This document provides specifications for an AWS DSC BLOCK used to calibrate ultrasonic testing equipment. It describes the block's applications, dimensions for both inch and metric versions, materials it can be made from, and contact information for the manufacturer KIRTI NDT & ENGINEERING SERVICES.
AWS DS Calibration block
This document provides specifications for an AWS-DS calibration block used for straight beam distance, horizontal linearity, and sensitivity calibration. The block is 6 inches by 4 inches by 2 inches made of materials like carbon steel, stainless steel, or aluminum. It can be used for both inch and metric calibration requirements as the AWS standard does not specify a separate metric version.
AWS sensitivity block
APPLICATION: Sensitivity Block is AWS Type block also called SC Block used for sensitivity Calibration,
SPECIFICATIONS: ✓ ASTM E164, AWS-D1.1
INCH VERSION DIMENSIONS: ✓ 3.00” x 1.25” x 0.905” (L x W x H), 0.0625”Hole
METRIC VERSION DIMENSIONS: ✓ 75mm x 32mm x 22.6 (T x L x H), 1.6mm Hole
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc
Ball head telescopic gauge
Features: ➢ Used with an outside micrometer for measuring inside diameter of bores. ➢ Extra long for gaging deep and shallow holes, slots and similar work pieces. ➢ Gaging surface is fully hardened to insure long tool life. ➢ 4 sizes of gages are supplied in a fitted case. ➢ Spherical measuring faces hardened, Tool adjustment shaft Satin chrome finish ➢ Measuring Range 3-13mm (1/8"-1/2")
Instructions: ➢ A spring piston that telescopes in the bore enables internal diameter detection, which is measured with a micrometer or caliper. (Knurled locking device at the end.)
Using method: ➢ 1 Loosen the inner hole gauge and place it in the object to be measured. ➢ 2. Tighten clockwise and make one rotation to ensure tightening. ➢ 3. After the measurement is correct, tighten the lock clockwise. ➢ 4. After locking, measure the inner diameter data with a caliper.
Type A B C D ➢ Measuring range (Inch) :1/8"-1/5“, 1/5"-3/10" , 3/10" -2/5" , 2/5"-1/2" ➢ Measuring range (mm) : 3-5mm ,5-7.5mm, 7.5-10mm ,10-13mm ➢ Head diameter: 5mm, 5mm, 5mm, 5mm. ➢ Ball diameter: 3mm, 5mm, 7.5mm, 10mm. ➢ Length: 76mm, 79mm, 88mm, 92mm.
http
Drill gauge
Features: ➢ IDENTIFIES DRILL BITS SIZES- Helpful when working with older, unmarked drill bits and bits too small to fit diameter markings ➢ 29 MEASURING HOLES- Identified drill bits from 1/16 Inch to 1/2 Inch in 1/64th increments ➢ ETCHED MARKINGS- Black graduations to give high contrast and will not wear off ➢ NO MATH- Shows drill sizes in both inches and decimal equivalents ➢ DURABLE- Made from heavy duty, rustproof stainless steel ➢ 2-3/8" x 6-3/4" overall
http
Feeler gauge
The document describes a 32-blade feeler gauge set made of stainless steel. The feeler gauge blades measure thicknesses and gaps in both metric and imperial units, ranging from 0.0015 inches to 0.035 inches and 0.04 mm to 0.88 mm. The sizes are etched onto the blades for easy identification. The feeler gauge set can be used to measure gap widths and thicknesses for applications like machinery maintenance and repair.
Screw pitch gauge
Features: ➢ Fit for : Whitworth 55-Degree Threads & Metric 60-Degree Threads ➢ Material : Stainless Steel ➢ Size(Closed) : ~2 5/8 x 1/2 x 11/16inch(LWH) ➢ 52 folding leaves The leaves are individually stamped with accurately formed thread profiles Measures screw thread pitches between 0.25 6.0mm and 4 - 62 BSW(British Standard Whitworth) ➢ Package Content : 1 x Screw Pitch Gauge
Inch 55 ° specifications:
➢ 4G,4-1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G , 30G, 32G, 36G, 40G, 48G, 60G, 62G
Metric 60 ° specifications:
➢ 0.25,0.3,0.35,0.4,0.45,0.5,0.6,0.7,0.75,0.8,0.9,1.0,1.25,1.5,1.75,2.0, 2.5,3.0,3.5,4.0,4.5,5.0,5.5 6.0
Telescopic gauge
Features: ➢ Spring loaded with locking knurled knob. Range: 5/16" - 6" (8mm to 150mm). ➢ Stainless Steel Construction, Titanium coating finish. ➢ Constant spring tension gives uniform contact pressure. ➢ Double action rigid handle with self centering feature for quick checking of holes, slots and recess up to 6" deep. ➢ Contact points are hardened tool steel and precision ground in the end measuring radius. ➢ Gage expands in a hole to be measured (locks in place and then removed to determine final hole size using a micrometer or calipers).
Tyre depth gauge
Tyre tread is the raised rubber of the Tyre which contacts the road. It is handy tool for passenger car , commercial vehicles as well as light commercial vehicles as timely checking of Tyre wear helps in minimizing errors and maximizing Tyre life Worn rubber can dramatically reduce stopping distances, as well as affecting steering and cornering ability.
Pocket fillet weld gauge
Kirti NDT Manufacture and Supply Pocket Fillet Weld Gauge,
Features: ➢ Pocket Size- Measures 8 Size Fillets ➢ Check Leg Length, Throat Size, Plus allowable Convexity ➢ All Increments Permanently Engraved ➢ Each Welder Can Carry a set for pre-Inspection ➢ Handy Key Chain Hold Set Together
Weld contour profile gauge
Kirti NDT Manufacture and Supply Weld Profile Contour Profile Gauge
Features: ➢ recording the cross-sectional shape of a surface, welding bead width, welding profile test and welding groove Measures Internal Misalignment of pipe before and after tacking ➢ Heavy gauge steel frame with metal pins ➢ Pins are designed not to be removed. ➢ Marking gradations on the body. ➢ Suitable for inspection of welding, flooring, tiling, woodworking and plumbing
V Wac-welding Gauge
Kirti NDT Manufacture and Supply V Wac Weld Gauge
Features: ➢Measure Undercut, Crown Height ➢Measure Porosity & Pitting ➢All required Measurement are made a single gauge, ➢Sturdy Stainless Steel Made ➢Handy Easily carried in pocket
Taper weld gauge
Kirti NDT Manufacture and Supply Taper Gauge
Features: ➢Measured Root Gap ➢Measure Hole Diameter ➢Both Metric and Inch Scale
TAPER WELDING GAUGE
Skew T-fillet weld gauge
Kirti NDT Manufacture and Supply Skew-T Fillet Weld Gauge
Features: ➢Checking Angle of Vertical Member ➢Checking Weld Acute Side ➢Checking Weld Obtuse Side ➢Replaces all other sets of gauges to measure fillet or groove weld in skewed Member or members at 90 degree ➢A handy compilation of mathematical relationships between leg length, throats, skew angles and inspection dimensions. A must for designers and inspectors
http://www.kirtindt.in 1
SKEW-T-FILLET WLED
More Related Content
More from Kirti NDT
BNC to BNC CABLE
BNC to BNC cable is Cable required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Step wedge calibration block
APPLICATION: Used for Calibration of Ultrasonic Thickness Gauge, Straight Beam Thickness and Linearity Calibration etc.
SPECIFICATIONS: ✓ ASTM E797
Phased array type b block
APPLICATION: Used for beam Characterization and evaluation of system performance characteristics. Use it as baseline block to determine long-term instrument performance changes, generate DAC Curves and Evaluate linear/ Angular resolution , Focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonic capabilities
Phased array type a block
APPLICATION: Phased Array “Type A” Calibration Block is used during the initial setup and calibration of phased array Ultrasonic Unit , This Block can be used to perform task such as beam angle verification , Calibration for Wedge Delay, Sensitivity Calibration, Performing DAC/TCG AND more
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc.
INCH VERSION DIMENSIONS: ✓ 1.000” thick x 4.000” Hight x 12.00” Long ✓ 4.000” and 2.000” Radii, 19 through holes at 0.040” diameter , 1 through hole at0.080” Diameter , 4FBH at 0.80” diameter x0.080”, 0.160”, 0.235” and 0.315” deep, 4FBH at 0.157” Diameter x0.040”, 0.120”, 0.200” and 0.275” Deep, 3FBH at 0.080” Diameter x 0.120 Deep machined into the 2.000” Radious, 4EDM Notches at .004”, .008”,.012” and .016” deep x 0.20” wide x1.00” Long,
METRIC VERSION DIMENSIONS: ✓ 25.0mm thick x 100.0mm Hight x 300.0mm Long ✓ 100.0mm and 50.0mm Radii, 19 through holes at 1.0mm diameter, 1Through hole at 2.0mm diameter , 4FBH AT 2.0mm diameter x2.0mm, 4.0mm, 6.0mm an d8.0mm deep, 4FBH AT 4.0mm diameter x1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3FBH AT 2.0mm diameter x 3.0mmdeep machined into the 50mm radius, 4EDM Notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x25.0mm long
IIW V1 Ultrasonic calibartion block
APPLICATION:
Used for Calibration of Shear and Longitudinal Transducer and Verification of shear wave exit point and refracted angel, Can also be used for resolution and sensitivity checking.
SPECIFICATIONS: ✓ ASTM E164,MIL-STD-2154, IS4904
INCH VERSION DIMENSIONS: ✓ 1.0” x 4.0” x 12.0” With 4” Radious, 2.0” and 0.060” Diameter Hole, 0.240”deep x 0.080” wide slot and 1.0” Radious slot x 0.060” deep x 0.120” wide
METRIC VERSION DIMENSIONS: ✓ 25.0mm x 100mm x 300mm (T x L x H ) With 100mm Radious, 50mm and 1.5mm Diameter Hole, 6.0mm deep x 2.0mm wide slot and 25.0mm Radious slot x 1.5mm deep x 3.0mm wide
MATERIAL: ✓ Carbon steel, Stainless Steel, Aluminum etc.
DAC Calibration blocks
This document describes ASME non-piping DAC blocks used for angle beam calibration. It provides specifications for carbon steel and stainless steel blocks in various dimensions from 1/2" to 3" thick. The blocks contain three or two side-drilled holes at varying diameters and depths located at 1/4, 1/2, and 3/4 of the thickness. They also contain two EDM notches that are 2% of the thickness deep by 1/4" wide and at least 1" long. Contact information is provided for Kirti NDT & Engineering Services.
AWS DSC Calibration Block
This document provides specifications for an AWS DSC BLOCK used to calibrate ultrasonic testing equipment. It describes the block's applications, dimensions for both inch and metric versions, materials it can be made from, and contact information for the manufacturer KIRTI NDT & ENGINEERING SERVICES.
AWS DS Calibration block
This document provides specifications for an AWS-DS calibration block used for straight beam distance, horizontal linearity, and sensitivity calibration. The block is 6 inches by 4 inches by 2 inches made of materials like carbon steel, stainless steel, or aluminum. It can be used for both inch and metric calibration requirements as the AWS standard does not specify a separate metric version.
AWS sensitivity block
APPLICATION: Sensitivity Block is AWS Type block also called SC Block used for sensitivity Calibration,
SPECIFICATIONS: ✓ ASTM E164, AWS-D1.1
INCH VERSION DIMENSIONS: ✓ 3.00” x 1.25” x 0.905” (L x W x H), 0.0625”Hole
METRIC VERSION DIMENSIONS: ✓ 75mm x 32mm x 22.6 (T x L x H), 1.6mm Hole
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc
Ball head telescopic gauge
Features: ➢ Used with an outside micrometer for measuring inside diameter of bores. ➢ Extra long for gaging deep and shallow holes, slots and similar work pieces. ➢ Gaging surface is fully hardened to insure long tool life. ➢ 4 sizes of gages are supplied in a fitted case. ➢ Spherical measuring faces hardened, Tool adjustment shaft Satin chrome finish ➢ Measuring Range 3-13mm (1/8"-1/2")
Instructions: ➢ A spring piston that telescopes in the bore enables internal diameter detection, which is measured with a micrometer or caliper. (Knurled locking device at the end.)
Using method: ➢ 1 Loosen the inner hole gauge and place it in the object to be measured. ➢ 2. Tighten clockwise and make one rotation to ensure tightening. ➢ 3. After the measurement is correct, tighten the lock clockwise. ➢ 4. After locking, measure the inner diameter data with a caliper.
Type A B C D ➢ Measuring range (Inch) :1/8"-1/5“, 1/5"-3/10" , 3/10" -2/5" , 2/5"-1/2" ➢ Measuring range (mm) : 3-5mm ,5-7.5mm, 7.5-10mm ,10-13mm ➢ Head diameter: 5mm, 5mm, 5mm, 5mm. ➢ Ball diameter: 3mm, 5mm, 7.5mm, 10mm. ➢ Length: 76mm, 79mm, 88mm, 92mm.
http
Drill gauge
Features: ➢ IDENTIFIES DRILL BITS SIZES- Helpful when working with older, unmarked drill bits and bits too small to fit diameter markings ➢ 29 MEASURING HOLES- Identified drill bits from 1/16 Inch to 1/2 Inch in 1/64th increments ➢ ETCHED MARKINGS- Black graduations to give high contrast and will not wear off ➢ NO MATH- Shows drill sizes in both inches and decimal equivalents ➢ DURABLE- Made from heavy duty, rustproof stainless steel ➢ 2-3/8" x 6-3/4" overall
http
Feeler gauge
The document describes a 32-blade feeler gauge set made of stainless steel. The feeler gauge blades measure thicknesses and gaps in both metric and imperial units, ranging from 0.0015 inches to 0.035 inches and 0.04 mm to 0.88 mm. The sizes are etched onto the blades for easy identification. The feeler gauge set can be used to measure gap widths and thicknesses for applications like machinery maintenance and repair.
Screw pitch gauge
Features: ➢ Fit for : Whitworth 55-Degree Threads & Metric 60-Degree Threads ➢ Material : Stainless Steel ➢ Size(Closed) : ~2 5/8 x 1/2 x 11/16inch(LWH) ➢ 52 folding leaves The leaves are individually stamped with accurately formed thread profiles Measures screw thread pitches between 0.25 6.0mm and 4 - 62 BSW(British Standard Whitworth) ➢ Package Content : 1 x Screw Pitch Gauge
Inch 55 ° specifications:
➢ 4G,4-1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G , 30G, 32G, 36G, 40G, 48G, 60G, 62G
Metric 60 ° specifications:
➢ 0.25,0.3,0.35,0.4,0.45,0.5,0.6,0.7,0.75,0.8,0.9,1.0,1.25,1.5,1.75,2.0, 2.5,3.0,3.5,4.0,4.5,5.0,5.5 6.0
Telescopic gauge
Features: ➢ Spring loaded with locking knurled knob. Range: 5/16" - 6" (8mm to 150mm). ➢ Stainless Steel Construction, Titanium coating finish. ➢ Constant spring tension gives uniform contact pressure. ➢ Double action rigid handle with self centering feature for quick checking of holes, slots and recess up to 6" deep. ➢ Contact points are hardened tool steel and precision ground in the end measuring radius. ➢ Gage expands in a hole to be measured (locks in place and then removed to determine final hole size using a micrometer or calipers).
Tyre depth gauge
Tyre tread is the raised rubber of the Tyre which contacts the road. It is handy tool for passenger car , commercial vehicles as well as light commercial vehicles as timely checking of Tyre wear helps in minimizing errors and maximizing Tyre life Worn rubber can dramatically reduce stopping distances, as well as affecting steering and cornering ability.
Pocket fillet weld gauge
Kirti NDT Manufacture and Supply Pocket Fillet Weld Gauge,
Features: ➢ Pocket Size- Measures 8 Size Fillets ➢ Check Leg Length, Throat Size, Plus allowable Convexity ➢ All Increments Permanently Engraved ➢ Each Welder Can Carry a set for pre-Inspection ➢ Handy Key Chain Hold Set Together
Weld contour profile gauge
Kirti NDT Manufacture and Supply Weld Profile Contour Profile Gauge
Features: ➢ recording the cross-sectional shape of a surface, welding bead width, welding profile test and welding groove Measures Internal Misalignment of pipe before and after tacking ➢ Heavy gauge steel frame with metal pins ➢ Pins are designed not to be removed. ➢ Marking gradations on the body. ➢ Suitable for inspection of welding, flooring, tiling, woodworking and plumbing
V Wac-welding Gauge
Kirti NDT Manufacture and Supply V Wac Weld Gauge
Features: ➢Measure Undercut, Crown Height ➢Measure Porosity & Pitting ➢All required Measurement are made a single gauge, ➢Sturdy Stainless Steel Made ➢Handy Easily carried in pocket
Taper weld gauge
Kirti NDT Manufacture and Supply Taper Gauge
Features: ➢Measured Root Gap ➢Measure Hole Diameter ➢Both Metric and Inch Scale
TAPER WELDING GAUGE
Skew T-fillet weld gauge
Kirti NDT Manufacture and Supply Skew-T Fillet Weld Gauge
Features: ➢Checking Angle of Vertical Member ➢Checking Weld Acute Side ➢Checking Weld Obtuse Side ➢Replaces all other sets of gauges to measure fillet or groove weld in skewed Member or members at 90 degree ➢A handy compilation of mathematical relationships between leg length, throats, skew angles and inspection dimensions. A must for designers and inspectors
http://www.kirtindt.in 1
SKEW-T-FILLET WLED