AWS DS Calibration block
•
0 likes•22 views
This document provides specifications for an AWS-DS calibration block used for straight beam distance, horizontal linearity, and sensitivity calibration. The block is 6 inches by 4 inches by 2 inches made of materials like carbon steel, stainless steel, or aluminum. It can be used for both inch and metric calibration requirements as the AWS standard does not specify a separate metric version.
Report
Share
Report
Share
Download to read offline
Recommended
KAPP Niles CNC Gear Grinders Presents: Generating grinding of small gears
Up to now, gears with interfering contours could only be finished using discontinuous profile grinding or gear honing, which have disadvantages in terms of productivity and cost-effectiveness compared to continuous generating grinding of non-interfering components. A new development from KAPP NILES uses high-speed grinding spindles on their KX machines to allow for the first time the continuous generating grinding of gears with interfering contours, enabling the quality, processing times and costs of serial production previously considered impossible for such complex gears. The KX 160/260 TWIN machines can now process gears requiring a 60mm tool diameter using generating grinding, and achieve the module range of 0.5-4.5mm and tool width of 160
Radiography Film Viewer
Features:
High Luminance.
Energy Saving.
Viewing Area: 12”x4”.
Adjustable Shutter for Viewing Area.
Electronic Brightness Control
Specification:
View Film Density up to 5.0 Density.
Input Voltage: 230Volt (±5%).
Power Consumption: 160W approx.
Heavy Aluminum heat sink.
Cooling Fan: 2 Nos.
Plug in Foot Switch.
Foot Switch & foot Switch Cable is shock Proof.
Mini lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Mini lemo to microdot cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Microdot to lemo Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Bnc to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Recommended
KAPP Niles CNC Gear Grinders Presents: Generating grinding of small gears
Up to now, gears with interfering contours could only be finished using discontinuous profile grinding or gear honing, which have disadvantages in terms of productivity and cost-effectiveness compared to continuous generating grinding of non-interfering components. A new development from KAPP NILES uses high-speed grinding spindles on their KX machines to allow for the first time the continuous generating grinding of gears with interfering contours, enabling the quality, processing times and costs of serial production previously considered impossible for such complex gears. The KX 160/260 TWIN machines can now process gears requiring a 60mm tool diameter using generating grinding, and achieve the module range of 0.5-4.5mm and tool width of 160
Radiography Film Viewer
Features:
High Luminance.
Energy Saving.
Viewing Area: 12”x4”.
Adjustable Shutter for Viewing Area.
Electronic Brightness Control
Specification:
View Film Density up to 5.0 Density.
Input Voltage: 230Volt (±5%).
Power Consumption: 160W approx.
Heavy Aluminum heat sink.
Cooling Fan: 2 Nos.
Plug in Foot Switch.
Foot Switch & foot Switch Cable is shock Proof.
Mini lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Mini lemo to microdot cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Microdot to lemo Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Bnc to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to Microdot Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to LEMO Cable
Lemo to BNC Cable is types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to BNC CABLE
BNC to BNC cable is Cable required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Step wedge calibration block
APPLICATION: Used for Calibration of Ultrasonic Thickness Gauge, Straight Beam Thickness and Linearity Calibration etc.
SPECIFICATIONS: ✓ ASTM E797
Phased array type b block
APPLICATION: Used for beam Characterization and evaluation of system performance characteristics. Use it as baseline block to determine long-term instrument performance changes, generate DAC Curves and Evaluate linear/ Angular resolution , Focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonic capabilities
Phased array type a block
APPLICATION: Phased Array “Type A” Calibration Block is used during the initial setup and calibration of phased array Ultrasonic Unit , This Block can be used to perform task such as beam angle verification , Calibration for Wedge Delay, Sensitivity Calibration, Performing DAC/TCG AND more
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc.
INCH VERSION DIMENSIONS: ✓ 1.000” thick x 4.000” Hight x 12.00” Long ✓ 4.000” and 2.000” Radii, 19 through holes at 0.040” diameter , 1 through hole at0.080” Diameter , 4FBH at 0.80” diameter x0.080”, 0.160”, 0.235” and 0.315” deep, 4FBH at 0.157” Diameter x0.040”, 0.120”, 0.200” and 0.275” Deep, 3FBH at 0.080” Diameter x 0.120 Deep machined into the 2.000” Radious, 4EDM Notches at .004”, .008”,.012” and .016” deep x 0.20” wide x1.00” Long,
METRIC VERSION DIMENSIONS: ✓ 25.0mm thick x 100.0mm Hight x 300.0mm Long ✓ 100.0mm and 50.0mm Radii, 19 through holes at 1.0mm diameter, 1Through hole at 2.0mm diameter , 4FBH AT 2.0mm diameter x2.0mm, 4.0mm, 6.0mm an d8.0mm deep, 4FBH AT 4.0mm diameter x1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3FBH AT 2.0mm diameter x 3.0mmdeep machined into the 50mm radius, 4EDM Notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x25.0mm long
IIW V1 Ultrasonic calibartion block
APPLICATION:
Used for Calibration of Shear and Longitudinal Transducer and Verification of shear wave exit point and refracted angel, Can also be used for resolution and sensitivity checking.
SPECIFICATIONS: ✓ ASTM E164,MIL-STD-2154, IS4904
INCH VERSION DIMENSIONS: ✓ 1.0” x 4.0” x 12.0” With 4” Radious, 2.0” and 0.060” Diameter Hole, 0.240”deep x 0.080” wide slot and 1.0” Radious slot x 0.060” deep x 0.120” wide
METRIC VERSION DIMENSIONS: ✓ 25.0mm x 100mm x 300mm (T x L x H ) With 100mm Radious, 50mm and 1.5mm Diameter Hole, 6.0mm deep x 2.0mm wide slot and 25.0mm Radious slot x 1.5mm deep x 3.0mm wide
MATERIAL: ✓ Carbon steel, Stainless Steel, Aluminum etc.
DAC Calibration blocks
This document describes ASME non-piping DAC blocks used for angle beam calibration. It provides specifications for carbon steel and stainless steel blocks in various dimensions from 1/2" to 3" thick. The blocks contain three or two side-drilled holes at varying diameters and depths located at 1/4, 1/2, and 3/4 of the thickness. They also contain two EDM notches that are 2% of the thickness deep by 1/4" wide and at least 1" long. Contact information is provided for Kirti NDT & Engineering Services.
AWS DSC Calibration Block
This document provides specifications for an AWS DSC BLOCK used to calibrate ultrasonic testing equipment. It describes the block's applications, dimensions for both inch and metric versions, materials it can be made from, and contact information for the manufacturer KIRTI NDT & ENGINEERING SERVICES.
AWS sensitivity block
APPLICATION: Sensitivity Block is AWS Type block also called SC Block used for sensitivity Calibration,
SPECIFICATIONS: ✓ ASTM E164, AWS-D1.1
INCH VERSION DIMENSIONS: ✓ 3.00” x 1.25” x 0.905” (L x W x H), 0.0625”Hole
METRIC VERSION DIMENSIONS: ✓ 75mm x 32mm x 22.6 (T x L x H), 1.6mm Hole
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc
Ball head telescopic gauge
Features: ➢ Used with an outside micrometer for measuring inside diameter of bores. ➢ Extra long for gaging deep and shallow holes, slots and similar work pieces. ➢ Gaging surface is fully hardened to insure long tool life. ➢ 4 sizes of gages are supplied in a fitted case. ➢ Spherical measuring faces hardened, Tool adjustment shaft Satin chrome finish ➢ Measuring Range 3-13mm (1/8"-1/2")
Instructions: ➢ A spring piston that telescopes in the bore enables internal diameter detection, which is measured with a micrometer or caliper. (Knurled locking device at the end.)
Using method: ➢ 1 Loosen the inner hole gauge and place it in the object to be measured. ➢ 2. Tighten clockwise and make one rotation to ensure tightening. ➢ 3. After the measurement is correct, tighten the lock clockwise. ➢ 4. After locking, measure the inner diameter data with a caliper.
Type A B C D ➢ Measuring range (Inch) :1/8"-1/5“, 1/5"-3/10" , 3/10" -2/5" , 2/5"-1/2" ➢ Measuring range (mm) : 3-5mm ,5-7.5mm, 7.5-10mm ,10-13mm ➢ Head diameter: 5mm, 5mm, 5mm, 5mm. ➢ Ball diameter: 3mm, 5mm, 7.5mm, 10mm. ➢ Length: 76mm, 79mm, 88mm, 92mm.
http
Drill gauge
Features: ➢ IDENTIFIES DRILL BITS SIZES- Helpful when working with older, unmarked drill bits and bits too small to fit diameter markings ➢ 29 MEASURING HOLES- Identified drill bits from 1/16 Inch to 1/2 Inch in 1/64th increments ➢ ETCHED MARKINGS- Black graduations to give high contrast and will not wear off ➢ NO MATH- Shows drill sizes in both inches and decimal equivalents ➢ DURABLE- Made from heavy duty, rustproof stainless steel ➢ 2-3/8" x 6-3/4" overall
http
Feeler gauge
The document describes a 32-blade feeler gauge set made of stainless steel. The feeler gauge blades measure thicknesses and gaps in both metric and imperial units, ranging from 0.0015 inches to 0.035 inches and 0.04 mm to 0.88 mm. The sizes are etched onto the blades for easy identification. The feeler gauge set can be used to measure gap widths and thicknesses for applications like machinery maintenance and repair.
Screw pitch gauge
Features: ➢ Fit for : Whitworth 55-Degree Threads & Metric 60-Degree Threads ➢ Material : Stainless Steel ➢ Size(Closed) : ~2 5/8 x 1/2 x 11/16inch(LWH) ➢ 52 folding leaves The leaves are individually stamped with accurately formed thread profiles Measures screw thread pitches between 0.25 6.0mm and 4 - 62 BSW(British Standard Whitworth) ➢ Package Content : 1 x Screw Pitch Gauge
Inch 55 ° specifications:
➢ 4G,4-1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G , 30G, 32G, 36G, 40G, 48G, 60G, 62G
Metric 60 ° specifications:
➢ 0.25,0.3,0.35,0.4,0.45,0.5,0.6,0.7,0.75,0.8,0.9,1.0,1.25,1.5,1.75,2.0, 2.5,3.0,3.5,4.0,4.5,5.0,5.5 6.0
Telescopic gauge
Features: ➢ Spring loaded with locking knurled knob. Range: 5/16" - 6" (8mm to 150mm). ➢ Stainless Steel Construction, Titanium coating finish. ➢ Constant spring tension gives uniform contact pressure. ➢ Double action rigid handle with self centering feature for quick checking of holes, slots and recess up to 6" deep. ➢ Contact points are hardened tool steel and precision ground in the end measuring radius. ➢ Gage expands in a hole to be measured (locks in place and then removed to determine final hole size using a micrometer or calipers).
Tyre depth gauge
Tyre tread is the raised rubber of the Tyre which contacts the road. It is handy tool for passenger car , commercial vehicles as well as light commercial vehicles as timely checking of Tyre wear helps in minimizing errors and maximizing Tyre life Worn rubber can dramatically reduce stopping distances, as well as affecting steering and cornering ability.
Pocket fillet weld gauge
Kirti NDT Manufacture and Supply Pocket Fillet Weld Gauge,
Features: ➢ Pocket Size- Measures 8 Size Fillets ➢ Check Leg Length, Throat Size, Plus allowable Convexity ➢ All Increments Permanently Engraved ➢ Each Welder Can Carry a set for pre-Inspection ➢ Handy Key Chain Hold Set Together
Weld contour profile gauge
Kirti NDT Manufacture and Supply Weld Profile Contour Profile Gauge
Features: ➢ recording the cross-sectional shape of a surface, welding bead width, welding profile test and welding groove Measures Internal Misalignment of pipe before and after tacking ➢ Heavy gauge steel frame with metal pins ➢ Pins are designed not to be removed. ➢ Marking gradations on the body. ➢ Suitable for inspection of welding, flooring, tiling, woodworking and plumbing
V Wac-welding Gauge
Kirti NDT Manufacture and Supply V Wac Weld Gauge
Features: ➢Measure Undercut, Crown Height ➢Measure Porosity & Pitting ➢All required Measurement are made a single gauge, ➢Sturdy Stainless Steel Made ➢Handy Easily carried in pocket
Taper weld gauge
Kirti NDT Manufacture and Supply Taper Gauge
Features: ➢Measured Root Gap ➢Measure Hole Diameter ➢Both Metric and Inch Scale
TAPER WELDING GAUGE
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
More Related Content
More from Kirti NDT
BNC to Microdot Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to LEMO Cable
Lemo to BNC Cable is types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to BNC CABLE
BNC to BNC cable is Cable required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Step wedge calibration block
APPLICATION: Used for Calibration of Ultrasonic Thickness Gauge, Straight Beam Thickness and Linearity Calibration etc.
SPECIFICATIONS: ✓ ASTM E797
Phased array type b block
APPLICATION: Used for beam Characterization and evaluation of system performance characteristics. Use it as baseline block to determine long-term instrument performance changes, generate DAC Curves and Evaluate linear/ Angular resolution , Focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonic capabilities
Phased array type a block
APPLICATION: Phased Array “Type A” Calibration Block is used during the initial setup and calibration of phased array Ultrasonic Unit , This Block can be used to perform task such as beam angle verification , Calibration for Wedge Delay, Sensitivity Calibration, Performing DAC/TCG AND more
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc.
INCH VERSION DIMENSIONS: ✓ 1.000” thick x 4.000” Hight x 12.00” Long ✓ 4.000” and 2.000” Radii, 19 through holes at 0.040” diameter , 1 through hole at0.080” Diameter , 4FBH at 0.80” diameter x0.080”, 0.160”, 0.235” and 0.315” deep, 4FBH at 0.157” Diameter x0.040”, 0.120”, 0.200” and 0.275” Deep, 3FBH at 0.080” Diameter x 0.120 Deep machined into the 2.000” Radious, 4EDM Notches at .004”, .008”,.012” and .016” deep x 0.20” wide x1.00” Long,
METRIC VERSION DIMENSIONS: ✓ 25.0mm thick x 100.0mm Hight x 300.0mm Long ✓ 100.0mm and 50.0mm Radii, 19 through holes at 1.0mm diameter, 1Through hole at 2.0mm diameter , 4FBH AT 2.0mm diameter x2.0mm, 4.0mm, 6.0mm an d8.0mm deep, 4FBH AT 4.0mm diameter x1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3FBH AT 2.0mm diameter x 3.0mmdeep machined into the 50mm radius, 4EDM Notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x25.0mm long
IIW V1 Ultrasonic calibartion block
APPLICATION:
Used for Calibration of Shear and Longitudinal Transducer and Verification of shear wave exit point and refracted angel, Can also be used for resolution and sensitivity checking.
SPECIFICATIONS: ✓ ASTM E164,MIL-STD-2154, IS4904
INCH VERSION DIMENSIONS: ✓ 1.0” x 4.0” x 12.0” With 4” Radious, 2.0” and 0.060” Diameter Hole, 0.240”deep x 0.080” wide slot and 1.0” Radious slot x 0.060” deep x 0.120” wide
METRIC VERSION DIMENSIONS: ✓ 25.0mm x 100mm x 300mm (T x L x H ) With 100mm Radious, 50mm and 1.5mm Diameter Hole, 6.0mm deep x 2.0mm wide slot and 25.0mm Radious slot x 1.5mm deep x 3.0mm wide
MATERIAL: ✓ Carbon steel, Stainless Steel, Aluminum etc.
DAC Calibration blocks
This document describes ASME non-piping DAC blocks used for angle beam calibration. It provides specifications for carbon steel and stainless steel blocks in various dimensions from 1/2" to 3" thick. The blocks contain three or two side-drilled holes at varying diameters and depths located at 1/4, 1/2, and 3/4 of the thickness. They also contain two EDM notches that are 2% of the thickness deep by 1/4" wide and at least 1" long. Contact information is provided for Kirti NDT & Engineering Services.
AWS DSC Calibration Block
This document provides specifications for an AWS DSC BLOCK used to calibrate ultrasonic testing equipment. It describes the block's applications, dimensions for both inch and metric versions, materials it can be made from, and contact information for the manufacturer KIRTI NDT & ENGINEERING SERVICES.
AWS sensitivity block
APPLICATION: Sensitivity Block is AWS Type block also called SC Block used for sensitivity Calibration,
SPECIFICATIONS: ✓ ASTM E164, AWS-D1.1
INCH VERSION DIMENSIONS: ✓ 3.00” x 1.25” x 0.905” (L x W x H), 0.0625”Hole
METRIC VERSION DIMENSIONS: ✓ 75mm x 32mm x 22.6 (T x L x H), 1.6mm Hole
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc
Ball head telescopic gauge
Features: ➢ Used with an outside micrometer for measuring inside diameter of bores. ➢ Extra long for gaging deep and shallow holes, slots and similar work pieces. ➢ Gaging surface is fully hardened to insure long tool life. ➢ 4 sizes of gages are supplied in a fitted case. ➢ Spherical measuring faces hardened, Tool adjustment shaft Satin chrome finish ➢ Measuring Range 3-13mm (1/8"-1/2")
Instructions: ➢ A spring piston that telescopes in the bore enables internal diameter detection, which is measured with a micrometer or caliper. (Knurled locking device at the end.)
Using method: ➢ 1 Loosen the inner hole gauge and place it in the object to be measured. ➢ 2. Tighten clockwise and make one rotation to ensure tightening. ➢ 3. After the measurement is correct, tighten the lock clockwise. ➢ 4. After locking, measure the inner diameter data with a caliper.
Type A B C D ➢ Measuring range (Inch) :1/8"-1/5“, 1/5"-3/10" , 3/10" -2/5" , 2/5"-1/2" ➢ Measuring range (mm) : 3-5mm ,5-7.5mm, 7.5-10mm ,10-13mm ➢ Head diameter: 5mm, 5mm, 5mm, 5mm. ➢ Ball diameter: 3mm, 5mm, 7.5mm, 10mm. ➢ Length: 76mm, 79mm, 88mm, 92mm.
http
Drill gauge
Features: ➢ IDENTIFIES DRILL BITS SIZES- Helpful when working with older, unmarked drill bits and bits too small to fit diameter markings ➢ 29 MEASURING HOLES- Identified drill bits from 1/16 Inch to 1/2 Inch in 1/64th increments ➢ ETCHED MARKINGS- Black graduations to give high contrast and will not wear off ➢ NO MATH- Shows drill sizes in both inches and decimal equivalents ➢ DURABLE- Made from heavy duty, rustproof stainless steel ➢ 2-3/8" x 6-3/4" overall
http
Feeler gauge
The document describes a 32-blade feeler gauge set made of stainless steel. The feeler gauge blades measure thicknesses and gaps in both metric and imperial units, ranging from 0.0015 inches to 0.035 inches and 0.04 mm to 0.88 mm. The sizes are etched onto the blades for easy identification. The feeler gauge set can be used to measure gap widths and thicknesses for applications like machinery maintenance and repair.
Screw pitch gauge
Features: ➢ Fit for : Whitworth 55-Degree Threads & Metric 60-Degree Threads ➢ Material : Stainless Steel ➢ Size(Closed) : ~2 5/8 x 1/2 x 11/16inch(LWH) ➢ 52 folding leaves The leaves are individually stamped with accurately formed thread profiles Measures screw thread pitches between 0.25 6.0mm and 4 - 62 BSW(British Standard Whitworth) ➢ Package Content : 1 x Screw Pitch Gauge
Inch 55 ° specifications:
➢ 4G,4-1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G , 30G, 32G, 36G, 40G, 48G, 60G, 62G
Metric 60 ° specifications:
➢ 0.25,0.3,0.35,0.4,0.45,0.5,0.6,0.7,0.75,0.8,0.9,1.0,1.25,1.5,1.75,2.0, 2.5,3.0,3.5,4.0,4.5,5.0,5.5 6.0
Telescopic gauge
Features: ➢ Spring loaded with locking knurled knob. Range: 5/16" - 6" (8mm to 150mm). ➢ Stainless Steel Construction, Titanium coating finish. ➢ Constant spring tension gives uniform contact pressure. ➢ Double action rigid handle with self centering feature for quick checking of holes, slots and recess up to 6" deep. ➢ Contact points are hardened tool steel and precision ground in the end measuring radius. ➢ Gage expands in a hole to be measured (locks in place and then removed to determine final hole size using a micrometer or calipers).
Tyre depth gauge
Tyre tread is the raised rubber of the Tyre which contacts the road. It is handy tool for passenger car , commercial vehicles as well as light commercial vehicles as timely checking of Tyre wear helps in minimizing errors and maximizing Tyre life Worn rubber can dramatically reduce stopping distances, as well as affecting steering and cornering ability.
Pocket fillet weld gauge
Kirti NDT Manufacture and Supply Pocket Fillet Weld Gauge,
Features: ➢ Pocket Size- Measures 8 Size Fillets ➢ Check Leg Length, Throat Size, Plus allowable Convexity ➢ All Increments Permanently Engraved ➢ Each Welder Can Carry a set for pre-Inspection ➢ Handy Key Chain Hold Set Together
Weld contour profile gauge
Kirti NDT Manufacture and Supply Weld Profile Contour Profile Gauge
Features: ➢ recording the cross-sectional shape of a surface, welding bead width, welding profile test and welding groove Measures Internal Misalignment of pipe before and after tacking ➢ Heavy gauge steel frame with metal pins ➢ Pins are designed not to be removed. ➢ Marking gradations on the body. ➢ Suitable for inspection of welding, flooring, tiling, woodworking and plumbing
V Wac-welding Gauge
Kirti NDT Manufacture and Supply V Wac Weld Gauge
Features: ➢Measure Undercut, Crown Height ➢Measure Porosity & Pitting ➢All required Measurement are made a single gauge, ➢Sturdy Stainless Steel Made ➢Handy Easily carried in pocket
Taper weld gauge
Kirti NDT Manufacture and Supply Taper Gauge
Features: ➢Measured Root Gap ➢Measure Hole Diameter ➢Both Metric and Inch Scale
TAPER WELDING GAUGE
More from Kirti NDT (20)
Recently uploaded
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
The Fourth Industrial Revolution is transforming industries, including healthcare, by integrating digital,
physical, and biological technologies. This study examines the integration of 4.0 technologies into
healthcare, identifying success factors and challenges through interviews with 70 stakeholders from 33
countries. Healthcare is evolving significantly, with varied objectives across nations aiming to improve
population health. The study explores stakeholders' perceptions on critical success factors, identifying
challenges such as insufficiently trained personnel, organizational silos, and structural barriers to data
exchange. Facilitators for integration include cost reduction initiatives and interoperability policies.
Technologies like IoT, Big Data, AI, Machine Learning, and robotics enhance diagnostics, treatment
precision, and real-time monitoring, reducing errors and optimizing resource utilization. Automation
improves employee satisfaction and patient care, while Blockchain and telemedicine drive cost reductions.
Successful integration requires skilled professionals and supportive policies, promising efficient resource
use, lower error rates, and accelerated processes, leading to optimized global healthcare outcomes.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Recently uploaded (20)
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
AWS DS Calibration block
- 1. KIRTI NDT & ENGINEERING SERVICES AWS –DS CALIBRATION BLOCK http://www.kirtindt.in 1 AWS-DSBLOCK APPLICATION: AWS Type block used for Straight Beam Distance Horizontal Linearity and Sensitivity Calibration SPECIFICATIONS: ✓ AWS-D1.5-95 DIMENSIONS: 6.00” x 4” x 2” (152.4mm x 101.6mm x 50.8 mm) MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc. AWS Does not specify a separate metric version of the DS Block, The Metric Block in AWS Shows only the metric equivalents to the standard design , therefore this block can be used for both Inch and Metric requirement
- 2. KIRTI NDT & ENGINEERING SERVICES Add: 707/B-Wing, Shree Sai Raj Park, Rajaji Path Road, Dombivali East, Thane, Maharashtra India-421201 Tel: +918779246578, +917718917422 What Sapp:+918779246578 Email: kirtindt@yahoo.in, kirti@kirtindt.in Website: www.kirtindt.in