Step wedge calibration block
•
0 likes•139 views
APPLICATION: Used for Calibration of Ultrasonic Thickness Gauge, Straight Beam Thickness and Linearity Calibration etc. SPECIFICATIONS: ✓ ASTM E797
Report
Share
Report
Share
Download to read offline
Recommended
AWS DSC Calibration Block
This document provides specifications for an AWS DSC BLOCK used to calibrate ultrasonic testing equipment. It describes the block's applications, dimensions for both inch and metric versions, materials it can be made from, and contact information for the manufacturer KIRTI NDT & ENGINEERING SERVICES.
IIW V1 Ultrasonic calibartion block
APPLICATION:
Used for Calibration of Shear and Longitudinal Transducer and Verification of shear wave exit point and refracted angel, Can also be used for resolution and sensitivity checking.
SPECIFICATIONS: ✓ ASTM E164,MIL-STD-2154, IS4904
INCH VERSION DIMENSIONS: ✓ 1.0” x 4.0” x 12.0” With 4” Radious, 2.0” and 0.060” Diameter Hole, 0.240”deep x 0.080” wide slot and 1.0” Radious slot x 0.060” deep x 0.120” wide
METRIC VERSION DIMENSIONS: ✓ 25.0mm x 100mm x 300mm (T x L x H ) With 100mm Radious, 50mm and 1.5mm Diameter Hole, 6.0mm deep x 2.0mm wide slot and 25.0mm Radious slot x 1.5mm deep x 3.0mm wide
MATERIAL: ✓ Carbon steel, Stainless Steel, Aluminum etc.
On line tire tread profile measurement - why does it matter?
This document discusses the value of online tread profile measurement (OLP) technology for tire production. It argues that periodic offline testing is not sufficient to detect random quality issues, while OLP can monitor the process continuously and detect issues as they occur. Examples are given of problems like die flow interruptions, batch changes affecting die swell, and feed issues that could cause temporary profile dimension changes and be missed by offline testing. OLP is said to improve process capability and uniformity, reducing waste and improving tire quality. Large OLP users are said to use the data mining of OLP records to continuously improve production standards.
DAC Calibration blocks
This document describes ASME non-piping DAC blocks used for angle beam calibration. It provides specifications for carbon steel and stainless steel blocks in various dimensions from 1/2" to 3" thick. The blocks contain three or two side-drilled holes at varying diameters and depths located at 1/4, 1/2, and 3/4 of the thickness. They also contain two EDM notches that are 2% of the thickness deep by 1/4" wide and at least 1" long. Contact information is provided for Kirti NDT & Engineering Services.
Limits Fits and Tolerances ppt.pdf .
This document discusses metrology and measurements. Metrology is defined as the science of measurement, encompassing both experimental and theoretical determinations at any level of uncertainty across science and technology. Metrology includes establishing measurement units and standards, methods of measurement based on agreed units and standards, measuring errors, instruments and devices, instrument accuracy, and industrial inspection techniques. Instrumentation refers to the variety of measuring instruments used to monitor and control processes, and is concerned with measuring physical variables like pressure and temperature. The document outlines parts on measurements and metrology, and discusses reference books on the topics.
Aggregate testing
This document provides an introduction to aggregate testing procedures, including sampling, moisture content testing, sieve analysis, materials finer than 75μm testing, specific gravity and absorption testing, and Los Angeles abrasion testing. It emphasizes the importance of proper sampling techniques and discusses how aggregate testing data can be collected, analyzed, and evaluated using databases and statistical process control methods to monitor quality and identify process changes.
Fine Marketing, Mumbai, Testing Equipments.
Manufacturers and suppliers of testing machines like rubber testing machines, tensile testing machines, universal testing machines, Dynamic Hardness Tester (Model : FM-DHT), Brinell Hardness Testing Machines (Model : B-3000 J ).
Phased array type b block
APPLICATION: Used for beam Characterization and evaluation of system performance characteristics. Use it as baseline block to determine long-term instrument performance changes, generate DAC Curves and Evaluate linear/ Angular resolution , Focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonic capabilities
Recommended
AWS DSC Calibration Block
This document provides specifications for an AWS DSC BLOCK used to calibrate ultrasonic testing equipment. It describes the block's applications, dimensions for both inch and metric versions, materials it can be made from, and contact information for the manufacturer KIRTI NDT & ENGINEERING SERVICES.
IIW V1 Ultrasonic calibartion block
APPLICATION:
Used for Calibration of Shear and Longitudinal Transducer and Verification of shear wave exit point and refracted angel, Can also be used for resolution and sensitivity checking.
SPECIFICATIONS: ✓ ASTM E164,MIL-STD-2154, IS4904
INCH VERSION DIMENSIONS: ✓ 1.0” x 4.0” x 12.0” With 4” Radious, 2.0” and 0.060” Diameter Hole, 0.240”deep x 0.080” wide slot and 1.0” Radious slot x 0.060” deep x 0.120” wide
METRIC VERSION DIMENSIONS: ✓ 25.0mm x 100mm x 300mm (T x L x H ) With 100mm Radious, 50mm and 1.5mm Diameter Hole, 6.0mm deep x 2.0mm wide slot and 25.0mm Radious slot x 1.5mm deep x 3.0mm wide
MATERIAL: ✓ Carbon steel, Stainless Steel, Aluminum etc.
On line tire tread profile measurement - why does it matter?
This document discusses the value of online tread profile measurement (OLP) technology for tire production. It argues that periodic offline testing is not sufficient to detect random quality issues, while OLP can monitor the process continuously and detect issues as they occur. Examples are given of problems like die flow interruptions, batch changes affecting die swell, and feed issues that could cause temporary profile dimension changes and be missed by offline testing. OLP is said to improve process capability and uniformity, reducing waste and improving tire quality. Large OLP users are said to use the data mining of OLP records to continuously improve production standards.
DAC Calibration blocks
This document describes ASME non-piping DAC blocks used for angle beam calibration. It provides specifications for carbon steel and stainless steel blocks in various dimensions from 1/2" to 3" thick. The blocks contain three or two side-drilled holes at varying diameters and depths located at 1/4, 1/2, and 3/4 of the thickness. They also contain two EDM notches that are 2% of the thickness deep by 1/4" wide and at least 1" long. Contact information is provided for Kirti NDT & Engineering Services.
Limits Fits and Tolerances ppt.pdf .
This document discusses metrology and measurements. Metrology is defined as the science of measurement, encompassing both experimental and theoretical determinations at any level of uncertainty across science and technology. Metrology includes establishing measurement units and standards, methods of measurement based on agreed units and standards, measuring errors, instruments and devices, instrument accuracy, and industrial inspection techniques. Instrumentation refers to the variety of measuring instruments used to monitor and control processes, and is concerned with measuring physical variables like pressure and temperature. The document outlines parts on measurements and metrology, and discusses reference books on the topics.
Aggregate testing
This document provides an introduction to aggregate testing procedures, including sampling, moisture content testing, sieve analysis, materials finer than 75μm testing, specific gravity and absorption testing, and Los Angeles abrasion testing. It emphasizes the importance of proper sampling techniques and discusses how aggregate testing data can be collected, analyzed, and evaluated using databases and statistical process control methods to monitor quality and identify process changes.
Fine Marketing, Mumbai, Testing Equipments.
Manufacturers and suppliers of testing machines like rubber testing machines, tensile testing machines, universal testing machines, Dynamic Hardness Tester (Model : FM-DHT), Brinell Hardness Testing Machines (Model : B-3000 J ).
Phased array type b block
APPLICATION: Used for beam Characterization and evaluation of system performance characteristics. Use it as baseline block to determine long-term instrument performance changes, generate DAC Curves and Evaluate linear/ Angular resolution , Focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonic capabilities
Measuring gauge price list 2016
Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global.
We are providing instrument of MESURING PIN SET, LOOSE PIN GAUGE, THREAD MEASURING WIRE SET, REVERSIBLE PLUG GAUGE, PLAIN PLUG GAUGE, PLAIN RING GAUGE, THREAD PLUG GAUGE, THREAD RING GAUGE, SNAP GAUGE, DOWEL PIN & PRECISION GRINDING JOB WORKS.
Measuring Pins are widely used for CHECKING CENTER DISTANCES, GROOVE DIMENSIONS,BORE DIAMETER, GEAR MEASUREMENT, DIAL GAUGE SETTING, STRAIGHTNESS OF HOLES, PARALLEL GUIDES, DOVETAIL GUID, DEPTH OF PROFILES & ANGLES, and
many others.
We also Provide 50 MM TO 300 MM DIA COPPER & ALLUMINIUM WASHER/SEAL Ring. (STD SIZES).
We have team of highly trained staff with experience over 20 Years to
provide accurate measuring instrument to fullest satisfaction of clients. Our more than 850 satisfied industrial clients& traders are our real achievements. By virtue of our experienced team of engineers, technicians, support staff and world class MACHINERIES & MEASURING INSTRUMENTS, We
are able to build a large number of regular customers.
We are always here to help !
Testing instruments
The document describes various tensile testing instruments manufactured by Shanta Engineering, including hand operated, twin column universal, single column universal, and electronic tensile testing machines. The machines can test materials like rubber, plastics, cables, leather, paper, and metals under tension, compression, bending or flexural loads. Key features include digital load and displacement readouts, adjustable speeds, optional load cells and accessories for specific tests. Specifications include load capacities, resolutions, speeds, dimensions and power requirements.
Therma cote air barrier test final report astm e 2178
Architectural Testing was contracted by ThermaCote, Inc. to evaluate the air permeance of their ThermaCote® air barrier coating. Architectural Testing tested five samples of Dens-glass coated with ThermaCote® air barrier coating and one uncoated sample according to ASTM E 2178. The average air permeance of the coated samples was 0.000004 L/Pa·m2·s at 25 Pa increasing to 0.000006 L/Pa·m2·s at 300 Pa, meeting the standard for air barrier materials. The uncoated sample had significantly higher air permeance.
Tooth Preparation.pptx
The document provides step-by-step instructions for tooth preparation for an all-ceramic crown. It lists the necessary armamentarium including diamond burs ranging from 1-2mm in diameter. It then details the procedures for incisal, facial, and lingual reduction, including recommended depth of grooves and reductions of 1-2mm. It emphasizes creating a smooth, continuous 1mm chamfer along the margin with a rounded shoulder and no unsupported enamel. The preparation should be checked for any remaining sharp line angles before completion.
Measuring Pin
GEETA ENGINEERING WORK is leading manufacturing Co. in India, Providing measuring instrument across the global.
We are providing instrument of MEASURING PIN SET, LOOSE PIN, THREAD MEASURING WIRES, GEAR MEASURING WIRES, REVERSIBLE PLUG GAUGE, DOWEL PIN, CENTERLESS GRINDING SERVICE, TRAUB MACHINE JOB WORK, COPPER WASHER.
Measuring Pins are widely used for CHECKING CENTER DISTANCES, GROOVE DIMENSIONS,BORE DIAMETER,GEAR MEASURMENT,
DIAL GAUGE SETTING, STRAIGHTNESS OF HOLES, PARALLEL GUIDES, DOVETAIL GUID, DEPTH OF PROFILES & ANGLES, and many others.
We also Provide 50 MM TO 300 MM DIA COPPER & ALLUMINIUM WASHER/SEAL Ring. (STD SIZES).
We have team of highly trained staff with experience over 20 Years to provide accurate measuring instrument to fullest satisfaction of clients. Our more than 850 satisfied industrial clients & traders are our real achievements. By virtue of our experienced team of engineers, technicians, support staff and world class MACHINERIES & MEASURING INSTRUMENTS, We are able to build a large number of regular customers.
WE ARE ALWAYS HERE TO HELP YOU !
Measuring Pin Price List
GEETA ENGINEERING WORK is leading manufacturing Co. in India, Providing measuring instrument across the global.
We are providing instrument of MEASURING PIN SET, LOOSE PIN, THREAD MEASURING WIRES, GEAR MEASURING WIRES, REVERSIBLE PLUG GAUGE, DOWEL PIN, CENTERLESS GRINDING SERVICE, TRAUB MACHINE JOB WORK.
Measuring Pins are widely used for CHECKING CENTER DISTANCES, GROOVE DIMENSIONS,BORE DIAMETER,GEAR MEASURMENT,
DIAL GAUGE SETTING, STRAIGHTNESS OF HOLES, PARALLEL GUIDES, DOVETAIL GUID, DEPTH OF PROFILES & ANGLES, and many others.
We also Provide 50 MM TO 300 MM DIA COPPER & ALLUMINIUM WASHER/SEAL Ring. (STD SIZES).
We have team of highly trained staff with experience over 20 Years to provide accurate measuring instrument to fullest satisfaction of clients. Our more than 850 satisfied industrial clients & traders are our real achievements. By virtue of our experienced team of engineers, technicians, support staff and world class MACHINERIES & MEASURING INSTRUMENTS, We are able to build a large number of regular customers.
WE ARE ALWAYS HERE TO HELP YOU !
Ni vel zeiss ni
Trimble automatic levels provide precise and reliable height measurement for over 40 years. They offer high accuracy even in extreme conditions, making them suitable for construction sites and engineering surveys. The instruments have convenient controls and features like a gas-filled telescope, adjustable graduated circle, and compensator for automatic leveling, ensuring easy and precise operation.
Presscomps Engineering in Pune
Presscomps Engineering is a leading supplier & manufacturer of heavy duty Dies & Moulds, Forged machined components, patterns, prototype casting, and Aluminum components. It has started its journey way back in 2010-11. We are focus to achieve excellence in product and process.
For More Info: www.presscompsengineering.com
Phased array type a block
APPLICATION: Phased Array “Type A” Calibration Block is used during the initial setup and calibration of phased array Ultrasonic Unit , This Block can be used to perform task such as beam angle verification , Calibration for Wedge Delay, Sensitivity Calibration, Performing DAC/TCG AND more
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc.
INCH VERSION DIMENSIONS: ✓ 1.000” thick x 4.000” Hight x 12.00” Long ✓ 4.000” and 2.000” Radii, 19 through holes at 0.040” diameter , 1 through hole at0.080” Diameter , 4FBH at 0.80” diameter x0.080”, 0.160”, 0.235” and 0.315” deep, 4FBH at 0.157” Diameter x0.040”, 0.120”, 0.200” and 0.275” Deep, 3FBH at 0.080” Diameter x 0.120 Deep machined into the 2.000” Radious, 4EDM Notches at .004”, .008”,.012” and .016” deep x 0.20” wide x1.00” Long,
METRIC VERSION DIMENSIONS: ✓ 25.0mm thick x 100.0mm Hight x 300.0mm Long ✓ 100.0mm and 50.0mm Radii, 19 through holes at 1.0mm diameter, 1Through hole at 2.0mm diameter , 4FBH AT 2.0mm diameter x2.0mm, 4.0mm, 6.0mm an d8.0mm deep, 4FBH AT 4.0mm diameter x1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3FBH AT 2.0mm diameter x 3.0mmdeep machined into the 50mm radius, 4EDM Notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x25.0mm long
Limits fits
This document discusses limits, fits, tolerances and calculations for machined parts. It defines terms like maximum limit, minimum limit, tolerance, deviation, clearance fit and interference fit. It also describes hole basis and shaft basis systems for defining fits. The bilateral tolerance system allows deviations in both directions from the basic size, while the unilateral system only allows deviation in one direction. Different machining processes provide different attainable tolerance values.
DENTAL IMPLANT INSTRUMENTS [SURGICOSE]
This document provides a catalog of dental implant tools from Surgicose International. It lists over 60 different instruments used in dental implant procedures, including bone scrapers, periotome instruments, tissue punches, trephine burs, osteotome elevators, and sinus lift instruments. Each tool is given a catalog number, size, and brief description. The catalog concludes by providing contact information for Surgicose International, an exporter of dental instruments located in Pakistan.
Radiography Film Viewer
Features:
High Luminance.
Energy Saving.
Viewing Area: 12”x4”.
Adjustable Shutter for Viewing Area.
Electronic Brightness Control
Specification:
View Film Density up to 5.0 Density.
Input Voltage: 230Volt (±5%).
Power Consumption: 160W approx.
Heavy Aluminum heat sink.
Cooling Fan: 2 Nos.
Plug in Foot Switch.
Foot Switch & foot Switch Cable is shock Proof.
Mini lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Mini lemo to microdot cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Microdot to lemo Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Bnc to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to Microdot Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to LEMO Cable
Lemo to BNC Cable is types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to BNC CABLE
BNC to BNC cable is Cable required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
AWS DS Calibration block
This document provides specifications for an AWS-DS calibration block used for straight beam distance, horizontal linearity, and sensitivity calibration. The block is 6 inches by 4 inches by 2 inches made of materials like carbon steel, stainless steel, or aluminum. It can be used for both inch and metric calibration requirements as the AWS standard does not specify a separate metric version.
More Related Content
Similar to Step wedge calibration block
Measuring gauge price list 2016
Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global.
We are providing instrument of MESURING PIN SET, LOOSE PIN GAUGE, THREAD MEASURING WIRE SET, REVERSIBLE PLUG GAUGE, PLAIN PLUG GAUGE, PLAIN RING GAUGE, THREAD PLUG GAUGE, THREAD RING GAUGE, SNAP GAUGE, DOWEL PIN & PRECISION GRINDING JOB WORKS.
Measuring Pins are widely used for CHECKING CENTER DISTANCES, GROOVE DIMENSIONS,BORE DIAMETER, GEAR MEASUREMENT, DIAL GAUGE SETTING, STRAIGHTNESS OF HOLES, PARALLEL GUIDES, DOVETAIL GUID, DEPTH OF PROFILES & ANGLES, and
many others.
We also Provide 50 MM TO 300 MM DIA COPPER & ALLUMINIUM WASHER/SEAL Ring. (STD SIZES).
We have team of highly trained staff with experience over 20 Years to
provide accurate measuring instrument to fullest satisfaction of clients. Our more than 850 satisfied industrial clients& traders are our real achievements. By virtue of our experienced team of engineers, technicians, support staff and world class MACHINERIES & MEASURING INSTRUMENTS, We
are able to build a large number of regular customers.
We are always here to help !
Testing instruments
The document describes various tensile testing instruments manufactured by Shanta Engineering, including hand operated, twin column universal, single column universal, and electronic tensile testing machines. The machines can test materials like rubber, plastics, cables, leather, paper, and metals under tension, compression, bending or flexural loads. Key features include digital load and displacement readouts, adjustable speeds, optional load cells and accessories for specific tests. Specifications include load capacities, resolutions, speeds, dimensions and power requirements.
Therma cote air barrier test final report astm e 2178
Architectural Testing was contracted by ThermaCote, Inc. to evaluate the air permeance of their ThermaCote® air barrier coating. Architectural Testing tested five samples of Dens-glass coated with ThermaCote® air barrier coating and one uncoated sample according to ASTM E 2178. The average air permeance of the coated samples was 0.000004 L/Pa·m2·s at 25 Pa increasing to 0.000006 L/Pa·m2·s at 300 Pa, meeting the standard for air barrier materials. The uncoated sample had significantly higher air permeance.
Tooth Preparation.pptx
The document provides step-by-step instructions for tooth preparation for an all-ceramic crown. It lists the necessary armamentarium including diamond burs ranging from 1-2mm in diameter. It then details the procedures for incisal, facial, and lingual reduction, including recommended depth of grooves and reductions of 1-2mm. It emphasizes creating a smooth, continuous 1mm chamfer along the margin with a rounded shoulder and no unsupported enamel. The preparation should be checked for any remaining sharp line angles before completion.
Measuring Pin
GEETA ENGINEERING WORK is leading manufacturing Co. in India, Providing measuring instrument across the global.
We are providing instrument of MEASURING PIN SET, LOOSE PIN, THREAD MEASURING WIRES, GEAR MEASURING WIRES, REVERSIBLE PLUG GAUGE, DOWEL PIN, CENTERLESS GRINDING SERVICE, TRAUB MACHINE JOB WORK, COPPER WASHER.
Measuring Pins are widely used for CHECKING CENTER DISTANCES, GROOVE DIMENSIONS,BORE DIAMETER,GEAR MEASURMENT,
DIAL GAUGE SETTING, STRAIGHTNESS OF HOLES, PARALLEL GUIDES, DOVETAIL GUID, DEPTH OF PROFILES & ANGLES, and many others.
We also Provide 50 MM TO 300 MM DIA COPPER & ALLUMINIUM WASHER/SEAL Ring. (STD SIZES).
We have team of highly trained staff with experience over 20 Years to provide accurate measuring instrument to fullest satisfaction of clients. Our more than 850 satisfied industrial clients & traders are our real achievements. By virtue of our experienced team of engineers, technicians, support staff and world class MACHINERIES & MEASURING INSTRUMENTS, We are able to build a large number of regular customers.
WE ARE ALWAYS HERE TO HELP YOU !
Measuring Pin Price List
GEETA ENGINEERING WORK is leading manufacturing Co. in India, Providing measuring instrument across the global.
We are providing instrument of MEASURING PIN SET, LOOSE PIN, THREAD MEASURING WIRES, GEAR MEASURING WIRES, REVERSIBLE PLUG GAUGE, DOWEL PIN, CENTERLESS GRINDING SERVICE, TRAUB MACHINE JOB WORK.
Measuring Pins are widely used for CHECKING CENTER DISTANCES, GROOVE DIMENSIONS,BORE DIAMETER,GEAR MEASURMENT,
DIAL GAUGE SETTING, STRAIGHTNESS OF HOLES, PARALLEL GUIDES, DOVETAIL GUID, DEPTH OF PROFILES & ANGLES, and many others.
We also Provide 50 MM TO 300 MM DIA COPPER & ALLUMINIUM WASHER/SEAL Ring. (STD SIZES).
We have team of highly trained staff with experience over 20 Years to provide accurate measuring instrument to fullest satisfaction of clients. Our more than 850 satisfied industrial clients & traders are our real achievements. By virtue of our experienced team of engineers, technicians, support staff and world class MACHINERIES & MEASURING INSTRUMENTS, We are able to build a large number of regular customers.
WE ARE ALWAYS HERE TO HELP YOU !
Ni vel zeiss ni
Trimble automatic levels provide precise and reliable height measurement for over 40 years. They offer high accuracy even in extreme conditions, making them suitable for construction sites and engineering surveys. The instruments have convenient controls and features like a gas-filled telescope, adjustable graduated circle, and compensator for automatic leveling, ensuring easy and precise operation.
Presscomps Engineering in Pune
Presscomps Engineering is a leading supplier & manufacturer of heavy duty Dies & Moulds, Forged machined components, patterns, prototype casting, and Aluminum components. It has started its journey way back in 2010-11. We are focus to achieve excellence in product and process.
For More Info: www.presscompsengineering.com
Phased array type a block
APPLICATION: Phased Array “Type A” Calibration Block is used during the initial setup and calibration of phased array Ultrasonic Unit , This Block can be used to perform task such as beam angle verification , Calibration for Wedge Delay, Sensitivity Calibration, Performing DAC/TCG AND more
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc.
INCH VERSION DIMENSIONS: ✓ 1.000” thick x 4.000” Hight x 12.00” Long ✓ 4.000” and 2.000” Radii, 19 through holes at 0.040” diameter , 1 through hole at0.080” Diameter , 4FBH at 0.80” diameter x0.080”, 0.160”, 0.235” and 0.315” deep, 4FBH at 0.157” Diameter x0.040”, 0.120”, 0.200” and 0.275” Deep, 3FBH at 0.080” Diameter x 0.120 Deep machined into the 2.000” Radious, 4EDM Notches at .004”, .008”,.012” and .016” deep x 0.20” wide x1.00” Long,
METRIC VERSION DIMENSIONS: ✓ 25.0mm thick x 100.0mm Hight x 300.0mm Long ✓ 100.0mm and 50.0mm Radii, 19 through holes at 1.0mm diameter, 1Through hole at 2.0mm diameter , 4FBH AT 2.0mm diameter x2.0mm, 4.0mm, 6.0mm an d8.0mm deep, 4FBH AT 4.0mm diameter x1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3FBH AT 2.0mm diameter x 3.0mmdeep machined into the 50mm radius, 4EDM Notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x25.0mm long
Limits fits
This document discusses limits, fits, tolerances and calculations for machined parts. It defines terms like maximum limit, minimum limit, tolerance, deviation, clearance fit and interference fit. It also describes hole basis and shaft basis systems for defining fits. The bilateral tolerance system allows deviations in both directions from the basic size, while the unilateral system only allows deviation in one direction. Different machining processes provide different attainable tolerance values.
DENTAL IMPLANT INSTRUMENTS [SURGICOSE]
This document provides a catalog of dental implant tools from Surgicose International. It lists over 60 different instruments used in dental implant procedures, including bone scrapers, periotome instruments, tissue punches, trephine burs, osteotome elevators, and sinus lift instruments. Each tool is given a catalog number, size, and brief description. The catalog concludes by providing contact information for Surgicose International, an exporter of dental instruments located in Pakistan.
Similar to Step wedge calibration block (11)
Therma cote air barrier test final report astm e 2178
Therma cote air barrier test final report astm e 2178
More from Kirti NDT
Radiography Film Viewer
Features:
High Luminance.
Energy Saving.
Viewing Area: 12”x4”.
Adjustable Shutter for Viewing Area.
Electronic Brightness Control
Specification:
View Film Density up to 5.0 Density.
Input Voltage: 230Volt (±5%).
Power Consumption: 160W approx.
Heavy Aluminum heat sink.
Cooling Fan: 2 Nos.
Plug in Foot Switch.
Foot Switch & foot Switch Cable is shock Proof.
Mini lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Mini lemo to microdot cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Microdot to lemo Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Lemo to lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
Bnc to mini lemo cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to Microdot Cable
We manufactures various types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to LEMO Cable
Lemo to BNC Cable is types of cables required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
BNC to BNC CABLE
BNC to BNC cable is Cable required for connecting transducers to the Flaw Detector. Standard cables are supplied for normal usage. They are available in various connector types and in various lengths.
Dual Cables with two connectors at each end to fit dual crystal transducer are also available.
Generally all cables are with 2 meters length.
AWS DS Calibration block
This document provides specifications for an AWS-DS calibration block used for straight beam distance, horizontal linearity, and sensitivity calibration. The block is 6 inches by 4 inches by 2 inches made of materials like carbon steel, stainless steel, or aluminum. It can be used for both inch and metric calibration requirements as the AWS standard does not specify a separate metric version.
AWS sensitivity block
APPLICATION: Sensitivity Block is AWS Type block also called SC Block used for sensitivity Calibration,
SPECIFICATIONS: ✓ ASTM E164, AWS-D1.1
INCH VERSION DIMENSIONS: ✓ 3.00” x 1.25” x 0.905” (L x W x H), 0.0625”Hole
METRIC VERSION DIMENSIONS: ✓ 75mm x 32mm x 22.6 (T x L x H), 1.6mm Hole
MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc
Ball head telescopic gauge
Features: ➢ Used with an outside micrometer for measuring inside diameter of bores. ➢ Extra long for gaging deep and shallow holes, slots and similar work pieces. ➢ Gaging surface is fully hardened to insure long tool life. ➢ 4 sizes of gages are supplied in a fitted case. ➢ Spherical measuring faces hardened, Tool adjustment shaft Satin chrome finish ➢ Measuring Range 3-13mm (1/8"-1/2")
Instructions: ➢ A spring piston that telescopes in the bore enables internal diameter detection, which is measured with a micrometer or caliper. (Knurled locking device at the end.)
Using method: ➢ 1 Loosen the inner hole gauge and place it in the object to be measured. ➢ 2. Tighten clockwise and make one rotation to ensure tightening. ➢ 3. After the measurement is correct, tighten the lock clockwise. ➢ 4. After locking, measure the inner diameter data with a caliper.
Type A B C D ➢ Measuring range (Inch) :1/8"-1/5“, 1/5"-3/10" , 3/10" -2/5" , 2/5"-1/2" ➢ Measuring range (mm) : 3-5mm ,5-7.5mm, 7.5-10mm ,10-13mm ➢ Head diameter: 5mm, 5mm, 5mm, 5mm. ➢ Ball diameter: 3mm, 5mm, 7.5mm, 10mm. ➢ Length: 76mm, 79mm, 88mm, 92mm.
http
Drill gauge
Features: ➢ IDENTIFIES DRILL BITS SIZES- Helpful when working with older, unmarked drill bits and bits too small to fit diameter markings ➢ 29 MEASURING HOLES- Identified drill bits from 1/16 Inch to 1/2 Inch in 1/64th increments ➢ ETCHED MARKINGS- Black graduations to give high contrast and will not wear off ➢ NO MATH- Shows drill sizes in both inches and decimal equivalents ➢ DURABLE- Made from heavy duty, rustproof stainless steel ➢ 2-3/8" x 6-3/4" overall
http
Feeler gauge
The document describes a 32-blade feeler gauge set made of stainless steel. The feeler gauge blades measure thicknesses and gaps in both metric and imperial units, ranging from 0.0015 inches to 0.035 inches and 0.04 mm to 0.88 mm. The sizes are etched onto the blades for easy identification. The feeler gauge set can be used to measure gap widths and thicknesses for applications like machinery maintenance and repair.
Screw pitch gauge
Features: ➢ Fit for : Whitworth 55-Degree Threads & Metric 60-Degree Threads ➢ Material : Stainless Steel ➢ Size(Closed) : ~2 5/8 x 1/2 x 11/16inch(LWH) ➢ 52 folding leaves The leaves are individually stamped with accurately formed thread profiles Measures screw thread pitches between 0.25 6.0mm and 4 - 62 BSW(British Standard Whitworth) ➢ Package Content : 1 x Screw Pitch Gauge
Inch 55 ° specifications:
➢ 4G,4-1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G , 30G, 32G, 36G, 40G, 48G, 60G, 62G
Metric 60 ° specifications:
➢ 0.25,0.3,0.35,0.4,0.45,0.5,0.6,0.7,0.75,0.8,0.9,1.0,1.25,1.5,1.75,2.0, 2.5,3.0,3.5,4.0,4.5,5.0,5.5 6.0
Telescopic gauge
Features: ➢ Spring loaded with locking knurled knob. Range: 5/16" - 6" (8mm to 150mm). ➢ Stainless Steel Construction, Titanium coating finish. ➢ Constant spring tension gives uniform contact pressure. ➢ Double action rigid handle with self centering feature for quick checking of holes, slots and recess up to 6" deep. ➢ Contact points are hardened tool steel and precision ground in the end measuring radius. ➢ Gage expands in a hole to be measured (locks in place and then removed to determine final hole size using a micrometer or calipers).
Tyre depth gauge
Tyre tread is the raised rubber of the Tyre which contacts the road. It is handy tool for passenger car , commercial vehicles as well as light commercial vehicles as timely checking of Tyre wear helps in minimizing errors and maximizing Tyre life Worn rubber can dramatically reduce stopping distances, as well as affecting steering and cornering ability.
Pocket fillet weld gauge
Kirti NDT Manufacture and Supply Pocket Fillet Weld Gauge,
Features: ➢ Pocket Size- Measures 8 Size Fillets ➢ Check Leg Length, Throat Size, Plus allowable Convexity ➢ All Increments Permanently Engraved ➢ Each Welder Can Carry a set for pre-Inspection ➢ Handy Key Chain Hold Set Together
Weld contour profile gauge
Kirti NDT Manufacture and Supply Weld Profile Contour Profile Gauge
Features: ➢ recording the cross-sectional shape of a surface, welding bead width, welding profile test and welding groove Measures Internal Misalignment of pipe before and after tacking ➢ Heavy gauge steel frame with metal pins ➢ Pins are designed not to be removed. ➢ Marking gradations on the body. ➢ Suitable for inspection of welding, flooring, tiling, woodworking and plumbing
More from Kirti NDT (20)
Recently uploaded
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Recently uploaded (20)
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Step wedge calibration block
- 1. KIRTI NDT & ENGINEERING SERVICES STEP-WEDGE CALIBRATION BLOCKS http://www.kirtindt.in 1 APPLICATION: Used for Calibration of Ultrasonic Thickness Gauge, Straight Beam Thickness and Linearity Calibration etc. SPECIFICATIONS: ✓ ASTM E797 STEP-WEDGEBLOCK INCH VERSION DIMENSIONS: ✓ 0.25”~1.00”inch Four Step, 0.25” inch increment/Step ( 3.00” x 0.75” x 1.00”: L x W x H) ✓ 0.10”~0.50”inch Five Step, 0.10” inch increment/Step ( 3.75” x 0.75” x 0.75”: L x W x H) METRIC VERSION DIMENSIONS: ✓ 1~10mm, Ten Step, 1mm Increment/step (200mm x 20mm x 10mm: L x W x H) ✓ 2~20mm, Ten Step, 2mm Increment/step (200mm x 20mm x 20mm: L x W x H) ✓ 2.5~25mm,Ten Step, 2.5mm Increment/step (200mm x 20mm x 25mm: L x W x H) ✓ 1~10mm, Ten Step, 1mm Increment/step (200mm x 20mm x 10mm: L x W x H) ✓ 6.25~25mm, Four Step (4A), 6.25mm Increment ( 80mm x 20mm x 25mm: L x W x H) ✓ 5~20mm, Four Step (4B), 5mm Increment ( 80mm x 20mm x 20mm: L x W x H) ✓ 2.5~12.5mm, Five Step (5A), 2.5mm Increment ( 100mm x 20mm x 12.5mm: L x W x H) ✓ 2~10mm, Five Step (5B), 2mm Increment ( 100mm x 20mm x 10mm: L x W x H) MATERIAL: ✓ Carbon steel, Stainless Steel, aluminum etc.
- 2. KIRTI NDT & ENGINEERING SERVICES Add: 707/B-Wing, Shree Sai Raj Park, Rajaji Path Road, Dombivali East, Thane, Maharashtra India-421201 Tel: +918779246578, +917718917422 What Sapp:+918779246578 Email: kirtindt@yahoo.in, kirti@kirtindt.in Website: www.kirtindt.in