To study coal based thermal power plant including (a). Site selection (b). Classification (c). Merits and demerits (d). Environmental impacts (e). Basic layout (f). Various parts (g).Working.
Thermal Power Plant - Full Detail About Plant and Parts (Also Contain Animate...Shubham Thakur
A thermal power station is a power plant in which the prime mover is steam driven. Water is heated, turns into steam and spins a steam turbine which drives an electrical generator. After it passes through the turbine, the steam is condensed in a condenser and recycled to where it was heated; this is known as a Rankine cycle. The greatest variation in the design of thermal power stations is due to the different fossil fuel resources generally used to heat the water. Some prefer to use the term energy center because such facilities convert forms of heat energy into electrical energy.[1] Certain thermal power plants also are designed to produce heat energy for industrial purposes of district heating, or desalination of water, in addition to generating electrical power. Globally, fossil fueled thermal power plants produce a large part of man-made CO2 emissions to the atmosphere, and efforts to reduce these are varied and widespread.
For Video on Themal Power Plant (Animated Working Video) :- https://www.youtube.com/watch?v=ouWOhk1INjo
Subscribe To Our Youtube Channel For More Videos:-
https://www.youtube.com/TheEngineeringScienc
Click Here To Subscribe:-
http://www.youtube.com/user/TheEngineeringScienc?sub_confirmation=1
introduction to thermal powerplant,type of thermal powerplant,captive powerplant,rankin cycle,co-generation powerplant,subcritical powerplant,supercritical powerplant,theory of operation,working principle,parts of powerplant,boiler,turbine,etc
Thermal Power Plant - Full Detail About Plant and Parts (Also Contain Animate...Shubham Thakur
A thermal power station is a power plant in which the prime mover is steam driven. Water is heated, turns into steam and spins a steam turbine which drives an electrical generator. After it passes through the turbine, the steam is condensed in a condenser and recycled to where it was heated; this is known as a Rankine cycle. The greatest variation in the design of thermal power stations is due to the different fossil fuel resources generally used to heat the water. Some prefer to use the term energy center because such facilities convert forms of heat energy into electrical energy.[1] Certain thermal power plants also are designed to produce heat energy for industrial purposes of district heating, or desalination of water, in addition to generating electrical power. Globally, fossil fueled thermal power plants produce a large part of man-made CO2 emissions to the atmosphere, and efforts to reduce these are varied and widespread.
For Video on Themal Power Plant (Animated Working Video) :- https://www.youtube.com/watch?v=ouWOhk1INjo
Subscribe To Our Youtube Channel For More Videos:-
https://www.youtube.com/TheEngineeringScienc
Click Here To Subscribe:-
http://www.youtube.com/user/TheEngineeringScienc?sub_confirmation=1
introduction to thermal powerplant,type of thermal powerplant,captive powerplant,rankin cycle,co-generation powerplant,subcritical powerplant,supercritical powerplant,theory of operation,working principle,parts of powerplant,boiler,turbine,etc
Power Plant or Power station? Do you know how electricity can be produced from different power plants and different prime energy sources. There are many types of power plants like - Thermal power plant, Nuclear power plant, Geothermal power plant, Bio gas power plant, Hydro power plant etc. From these power plants the prime moving energy source are different like - Heat, water, air, bio gas heat etc. Different components of power plants are described briefly which are the core of the electricity generation. A complete guidelines are provided regarding power or electricity.
Power Plant or Power station? Do you know how electricity can be produced from different power plants and different prime energy sources. There are many types of power plants like - Thermal power plant, Nuclear power plant, Geothermal power plant, Bio gas power plant, Hydro power plant etc. From these power plants the prime moving energy source are different like - Heat, water, air, bio gas heat etc. Different components of power plants are described briefly which are the core of the electricity generation. A complete guidelines are provided regarding power or electricity.
Este mes en Oil & Gas Magazine:
DCPA: el nuevo modelo de procura y abastecimiento de Pemex, Petróleo, Gas Natural y Electricidad: temas destacados en Mexico Oil & Gas Summit 2014, Foro de Procura de Petroleras Latinoamericanas GPL 10: el diálogo para el desarrollo de cadenas de valor, ¿Qué es la Ronda Uno?
Evidence: Consolidation activity / Evidencia: Actividad de consolidación.
Stage 2: “My checklist” / Etapa 2: “Mi lista de chequeo”.
ENGLISH DOT WORKS 2. semana 4 actividad 4.
ENGLISH DOT WORKS 2. week 4 activity 4.
ENGLISH DOT WORKS 2.SENA.
with this ppt you will learn about what is thermal power plant and construction and working of thermal power plant and also the advantages and disadvantages.
In this modern world, the dependence on
electricity is so much that it has become a
part and parcel of our life. The ever increas-
ing use of electric power for domestic, commer-
cial and industrial purposes necessitates to pro-
vide bulk electric power economically. This is
achieved with the help of suitable power produc-
ing units, known as Power plants or Electric
power generating stations. The design of a power
plant should incorporate two important aspects.
Firstly, the selection and placing of necessary
power-generating equipment should be such so
that a maximum of return will result from a mini-
mum of expenditure over the working life of the
plant. Secondly, the operation of the plant should
be such so as to provide cheap, reliable and
continuous service. In this chapter, we shall
focus our attention on various types of generat-
ing stations with special reference to their advan-
tages and disadvantages.
PROTECTION OF ELECTRICAL EQUIPMENT USING 3D THERMOGRAPHY AND IMAGE PROCESSINGEklavya Sharma
This paper revolves around a thermal imaging technology that enhance the perception and awareness towards the objects we see around us. Here, we are using this technology for the protection and defect detections of electrical power equipment. Starting from the origin of infrared we will go through the development and research on thermography. Then, it is followed by the real-time 3 dimensional thermography using Matlab and thermal imaging camera. Then the systematic procedures for the temperature measurement thereby detecting the faults in the electrical power equipment using 3D thermography. And then taking the corrective action by guiding the automation software’s according to the temperature signatures of the devices. In addition, this paper presents the outline of the previous researches related to the project.
SMART HOME AUTOMATION USING MOBILE APPLICATIONEklavya Sharma
Our smart home automation kit provides smartphone application based solutions for control &
energy optimization in industry, commercial buildings & homes. The kit requires a Arduino
Uno R3 having ATMega328 microcontroller for processing, Bluetooth module HC-06 is
required to transmit and receive data, relays are required to control the AC loads, ULN2003 IC
is used to drive the relays, an Android smartphone with the Smart Home Automation
application installed is required to control the AC loads fixed in the switch board and a power
supply of 12 V is required to power up the relays and Arduino requires the power supply of 7
V. If the DPDT (Double Pole Double Throw) switches are used then the kit can be made to
work manually as well as remotely.
Furthermore, the system can be improved for the door control, the temperature detection, the
light dimmer control etc. Similarly, the application can be improved for voice recognition. The
Smart Home Automation can be improved for receiving and sending signal through ESP8266
Wi-Fi module and can be controlled through mobile or computer via web.
Three-Axis Auto Stabilizing Video Camera PlatformEklavya Sharma
Basically auto-stabilizing platform consists of platform which is balanced by movement of three servo motors in opposite direction to the movement of the platform. Arduino Uno process the tilt angles obtained from MPU-6050 and give instruction to the respective servo motors to rotate by certain angle depending on its previous position to balance or control the platform. The intent of the platform design is to maintain the platform at an initially selected angle while the support structure orientation changes. The software was written with logic to convert the digital data from the accelerometer and gyroscope to an acceleration and gyro magnitude vector and then converted
in degrees. The InvenSense MPU-6050 sensor contains a 3axis MEMS accelerometer and a 3axis MEMS gyro in a single chip whose outputs are calibrated properly by using KALMAN FILTER
to give the precise angle. The magnitude of the angle was then compared to a predetermined mathematical function to infer the angle of tilt of the platform. The angle of tilt is then converted
to angle of rotation for the servos to adjust their current position and bring the platform in balanced condition. Testing showed the platform to perform as expected. Although some error on the final angle was expected, the magnitude of the error observed indicated the platform design has a high sensitivity to low tolerance mechanical joints (slop). Overall the platform design was validated based on the positional accuracy of the platform given the low quality components used to create it. In other words, the platform performed greater than the sum of its parts.
MOBILE CONTROLLED ROBOTIC ARM USING ARDUINO AND HC-06Eklavya Sharma
Design and control of RoboDroid to do monotonous job using a smartphone only. The robot is named ‘RoboDroid’ as it utilizes concept of both Robotics and Android.
It is a mechanical arm with movable base that is controlled by an
application through Android Smartphone via Bluetooth using a
most commonly used Bluetooth module HC-06 and programmed
with Arduino Uno. Research Paper ranked first in BITS apogee in Electronics and instrumentation.
Design a Highly Efficient Push-Pull converter for Photovoltaic ApplicationsEklavya Sharma
Design a schematic to extract maximum obtainable solar power from a PV module and use the energy for a DC application. This project investigates in detail the concept of Maximum Power Point Tracking (MPPT) which significantly increases the efficiency of the solar photovoltaic system.
SMART HOME AUTOMATION USING MOBILE APPLICATIONEklavya Sharma
Concept of Smart Home Automation
Communication with the microcontroller or sensors
Establishing Serial communication between Arduino and Mobile
To design a User Interface for HMI i.e. Mobile Application using MIT App Inventor
To design the hardware connections between Arduino, HC-06, Relay and AC-loads
High efficiency push pull converter for photovoltaic applicationsEklavya Sharma
The object of this project is to design a high efficient DC-DC converter using Push-Pull topology.
A compact Dc-Dc converter with grid connection possibility and less switching losses.
MOBILE CONTROLLED ROBOTIC ARM USING ARDUINO AND HC-06Eklavya Sharma
Design and control of RoboDroid to do monotonous job using a smartphone only. The robot is named ‘RoboDroid’ as it utilizes concept of both Robotics and Android.
It is a mechanical arm with movable base that is controlled by an
application through Android Smartphone via Bluetooth using a
most commonly used Bluetooth module HC-06 and programmed
with Arduino Uno. For more info- www.codevista.net
Three axis auto stabilizing video camera platformEklavya Sharma
It is self made 3 axis auto stabilizing platform project based on Arduino board. and using MPU-6050 gyroscope.
Auto Stabilizing Platform consists of platform which is balanced by movement of three servo motors in opposite direction to the movement of the platform.
To study thermal imaging technology for the protection of power system equipment and to interface FLIR thermal imaging camera with MATLAB for real time thermal imaging of electrical power equipment
Infinite bus bar is one which keeps constant voltage and frequency although the load varies. Thus it may behave like a voltage source with zero internal impedance and infinite rotational inertia.
(a).Evolution of electric grid
(b).Concept of electric grid
(c).Definition of smart grid
(d).Needs of smart grid
(e).Smart grid drivers and function
(f).Opportunities, challenges and benefits of smart grid
(g).Difference between conventional and smart grid
(a).What is smart grid technology?
(b).Role and necessity of smart grid technology
(c).Benefits and application of grid
(d).Various challenge of grid
(e).Best possible location
(a)What do you mean by smart substation, smart feeders & Transmission system?
(b)What is need of smart substation, smart feeders & Transmission system?
(c) What are various merits and benefits of smart substation, smart feeders & Transmission system?
(d) Various technologies to make adjusting system into smart substation, smart distribution & Transmission system?
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
1. EXPERIMENT NO. 2
AIM: To study coal based thermal power plant including (a). Site selection (b). Classification
(c). Merits and demerits (d). Environmental impacts (e). Basic layout (f). Various parts
(g).Working
THEORY:
WHAT IS THERMAL POWER STATION?
A thermal power station is a power plant in which the prime mover is steam driven. Water is
heated, turns into steam and spins a steam turbine which drives an electrical generator. After it
passes through the turbine, the steam is condensed in a condenser and recycled to where it was
heated; this is known as a Rankine cycle. The greatest variation in the design of thermal power
stations is due to the different fuel sources. Some prefer to use the term energy center because such
facilities convert forms of heat energy into electricity. Some thermal power plants also deliver heat
energy for industrial purposes, for district heating, or for desalination of water as well as delivering
electrical power.
Installed thermal power capacity
The installed capacity of Thermal Power in India, as of October 31, 2012, was 140206.18 MW
which is 66.99%of total installed capacity.
Current installed base of Coal Based Thermal Power is 120,103.38 MW which comes to
57.38% of total installed base.
Current installed base of Gas Based Thermal Power is 18,903.05 MW which is 9.03% of
total installed capacity.
Current installed base of Oil Based Thermal Power is 1,199.75 MW which is 0.57% of total
installed capacity.
The state of Maharashtra is the largest producer of thermal power in the country.
In thermal power stations, mechanical power is produced by a heat engine that transforms thermal
energy, often from combustion of a fuel, into rotational energy. Most thermal power stations
2. produce steam, and these are sometimes called steam power stations. Not all thermal energy can
be transformed into mechanical power, according to the second law of thermodynamics. Therefore,
there is always heat lost to the environment. If this loss is employed as useful heat, for industrial
processes or district heating, the power plant is referred to as a cogeneration power plant or CHP
(combined heat-and-power) plant. In countries where district heating is common, there are
dedicated heat plants called heat-only boiler stations. An important class of power stations in the
Middle East uses by-product heat for the desalination of water.
CLASSIFICATION OF THERMAL POWER PLANT
By fuel
• Fossil-fuel power stations may also use a steam turbine generator or in the case of natural
gas-fired plants may use a combustion turbine. A coal-fired power station produces electricity by
burning coal to generate steam, and has the side-effect of producing large amounts of sulfur dioxide
which pollutes air and water and carbon dioxide, which contributes to global warming. About 50%
of electric generation in the USA is produced by coal-fired power plants
• Nuclear power plants use a nuclear reactor's heat to operate a steam turbine generator.
About 20% of electric generation in the USA is produced by nuclear power plants.
• Geothermal power plants use steam extracted from hot underground rocks.
• Biomass-fuelled power plants may be fuelled by waste from sugar cane, municipal solid
waste, landfill methane, or other forms of biomass.
• In integrated steel mills, blast furnace exhaust gas is a low-cost, although low-energy-
density, fuel.
• Waste heat from industrial processes is occasionally concentrated enough to use for power
generation, usually in a steam boiler and turbine.
• Solar thermal electric plants use sunlight to boil water and produce steam which turns the
generator.
By prime mover
3. • Steam turbine plants use the dynamic pressure generated by expanding steam to turn the
blades of a turbine. Almost all large non-hydro plants use this system. About 90% of all electric
power produced in the world is by use of steam turbines.
• Gas turbine plants use the dynamic pressure from flowing gases (air and combustion
products) to directly operate the turbine. Natural-gas fuelled (and oil fueled) combustion turbine
plants can start rapidly and so are used to supply "peak" energy during periods of high demand,
though at higher cost than base-loaded plants. These may be comparatively small units, and
sometimes completely unmanned, being remotely operated. This type was pioneered by the UK,
Prince town being the world's first, commissioned in 1959.
• Combined cycle plants have both a gas turbine fired by natural gas, and a steam boiler and
steam turbine which use the hot exhaust gas from the gas turbine to produce electricity. This greatly
increases the overall efficiency of the plant, and many new base load power plants are combined
cycle plants fired by natural gas.
• Internal combustion reciprocating engines are used to provide power for isolated
communities and are frequently used for small cogeneration plants. Hospitals, office buildings,
industrial plants, and other critical facilities also use them to provide backup power in case of a
power outage. These are usually fuelled by diesel oil, heavy oil, natural gas, and landfill gas.
By duty
Power plants that can be dispatched (scheduled) to provide energy to a system include:
• Base load power plants run nearly continually to provide that component of system load
that doesn't vary during a day or week. Base load plants can be highly optimized for low fuel cost,
but may not start or stop quickly during changes in system load. Examples of base-load plants
would include large modern coal-fired and nuclear generating stations, or hydro plants with a
predictable supply of water.
• Peaking power plants meet the daily peak load, which may only be for a one or two hours
each day. While their incremental operating cost is always higher than base load plants, they are
required to ensure security of the system during load peaks. Peaking plants include simple cycle
gas turbines and sometimes reciprocating internal combustion engines, which can be started up
4. rapidly when system peaks are predicted. Hydroelectric plants may also be designed for peaking
use.
• Load following power plants can economically follow the variations in the daily and
weekly load, at lower cost than peaking plants and with more flexibility than base load plants.
ADVANTAGES OF THERMAL POWER
1. The fuel used is quite cheap.
2. Less initial cost as compared to other generating plants.
3. It can be installed at any place irrespective of the existence of coal. The coal can be
transported to the site of the plant by rail or road.
4. It requires less space as compared to Hydro power plants.
5. Cost of generation is less than that of diesel power plants.
6. They can be located very conveniently near the load centers.
7. Does not require shielding like required in nuclear power plant
8. Unlike nuclear power plants whose power production method is difficult, for thermal
power plants it is easy.
9. Transmission costs are reduced as they can be set up near the industry.
10. The portion of steam generated can be used as process steam in different industries.
11. Steam engines and turbines can work under 25% of overload capacity.
12. Able to respond changing base loads without difficulty.
DISADVANTAGES OF THERMAL POWER
1. It pollutes the atmosphere due to production of large amount of smoke and fumes.
2. Large amounts of water are required.
3. Takes long time to be erected and put into action.
4. Maintenance and operating costs are high.
5. With increase in pressure and temperature, the cost of plant increases.
6. Troubles from smoke and heat from the plant, disposal of ash.
5. 7. The following list corers most of the factors that should be studied and considered in
selection of proper sites for power plant construction:
a) Transportation network: Easy and enough access to transportation network is
required in both power plant construction and operation periods.
b) Gas pipe network: Vicinity to the gas pipes reduces the required expenses.
c) Power transmission network: To transfer the generated electricity to the
consumers, the plant should be connected to electrical transmission system.
Therefore the nearness to the electric network can play a roll.
d) Geology and soil type: The power plant should be built in an area with soil and
rock layers that could stand the weight and vibrations of the power plant.
e) Earthquake and geological faults: Even weak and small earthquakes can damage
many parts of a power plant intensively. Therefore the site should be away enough
from the faults and previous earthquake areas.
f) Topography: It is proved that high elevation has a negative effect on production
efficiency of gas turbines. In addition, changing of a sloping area into a flat site for
the construction of the power plant needs extra budget. Therefore, the parameters
of elevation and slope should be considered.
g) Rivers and floodways: Obviously, the power plant should have a reasonable
distance from permanent and seasonal rivers and floodways.
h) Water resources: For the construction and operating of power plant different
volumes of water are required. This could be supplied from either rivers or
underground water resources. Therefore having enough water supplies in defined
vicinity can be a factor in the selection of the site.
i) Environmental resources: Operation of a power plant has important impacts on
environment. Therefore, priority will be given to the locations that are far enough
from national parks, wildlife, protected areas, etc.
j) Population centers: For the same reasons as above, the site should have an enough
distance from population centers.
6. SCHEMATIC DIAGRAM OF THERMAL POWER PLANT
Fig. Typical diagram of a coal-fired thermal power station
1. Cooling tower 10. Steam Control valve 19. Superheater
2. Cooling water pump 11. High pressure steam turbine 20. Forced draught (draft) fan
3. transmission line (3-phase) 12. Deaerator 21. Reheater
4. Step-up transformer (3-phase) 13. Feedwater heater 22. Combustion air intake
5. Electrical generator (3-phase) 14. Coal conveyor 23. Economiser
6. Low pressure steam turbine 15. Coal hopper 24. Air preheater
7. Condensate pump 16. Coal pulverizer 25. Precipitator
8. Surface condenser 17. Boiler steam drum 26. Induced draught (draft) fan
9. Intermediate pressure steam
turbine
18. Bottom ash hopper 27. Flue gas stack
7. MAIN AND AUXILIARY EQUIPMENTS-
Coal handling plant
• The function of coal handling plant is automatic feeding of coal to the boiler furnace.
• A thermal power plant burns enormous amounts of coal.
• A 200MW plant may require around 2000 tons of coal daily
Pulverizing plant
In modern thermal power plant, coal is pulverised i.e. ground to dust like size and carried to the
furnace in a stream of hot air. Pulverizing is a means of exposing a large surface area to the
action of oxygen and consequently helping combustion.
Pulverizing mills are further classified as:
1. Contact mill
2. Ball mill
3. Impact mill
Draft system
• The circulation of air is caused by a difference in pressure, known as Draft.
• Draft is a differential pressure b/w atmosphere and inside the boiler.
• It is necessary to cause the flow of gases through boiler setting
• It may be –
1. Natural draft
2. Mechanical draft
Boiler
• A boiler or steam generator is a closed vessel in which water under pressure, is converted
into steam.
• It is one of the major components of a thermal power plant
8. • Always designed to absorb maximum amount of heat released in the process of
combustion
Boilers are of two types-
1. Fire tube boiler
2. Water tube boiler
Superheater and reheater
Superheater:
Superheater is a component of a steam-generating unit in which steam, after it has left the boiler
drum, is heated above its saturation temperature. The amount of superheat added to the steam is
influenced by the location, arrangement, and amount of super heater surface installed, as well as
the rating of the boiler. The super heater may consist of one or more stages of tube banks
arranged to effectively transfer heat from the products of combustion. Super heaters are
classified as convection, radiant or combination of these.
Reheater: Some of the heat of superheated steam is used to rotate the turbine where it loses some
of its energy. Reheater is also steam boiler component in which heat is added to this
9. intermediate-pressure steam, which has given up some of its energy in expansion through the
high-pressure turbine. The steam after reheating is used to rotate the second steam turbine where
the heat is converted to mechanical energy. This mechanical energy is used to run the alternator,
which is coupled to turbine, there by generating electrical energy.
Steam turbine
A steam turbine converts heat energy of steam into mechanical energy and drives the generator.
It uses the principle that steam when issuing from a small opening attains a high velocity. This
velocity attained during expansion depends on the initial and final heat content of the steam. This
difference b/w initial and final heat content represents the heat energy converted into kinetic
energy.
These are of two types:-
Impulse turbine
Reaction turbine
Ash handling plant
The percentage of ash in coal varies from 5% in good quality coal to about 40% in
poor quality coal
Power plants generally use poor quality of coal , thus amount of ash produced by it is
pretty large
A modern 2000MW plant produces about 5000 tons of ash daily
The stations use some conveyor arrangement to carry ash to dump sites directly or for
carrying and loading it to trucks and wagons which transport it to the site of disposal
Condenser
Steam after rotating steam turbine comes to condenser. Condenser refers here to the shell and
tube heat exchanger (or surface condenser) installed at the outlet of every steam turbine in
Thermal power stations of utility companies generally.
These condensers are heat exchangers which convert steam from its gaseous to its liquid
state, also known as phase transition.
10. In so doing, the latent heat of steam is given out inside the condenser. Where water is in
short supply an air cooled condenser is often used.
An air cooled condenser is however significantly more expensive and cannot achieve as
low a steam turbine backpressure (and therefore less efficient) as a surface condenser.
The purpose is to condense the outlet (or exhaust) steam from steam turbine to obtain maximum
efficiency and also to get the condensed steam in the form of pure water, otherwise known as
condensate, back to steam generator or (boiler) as boiler feed water.
Cooling towers and ponds
A condenser needs huge quantity of water to condense the steam.
Typically a 2000MW plant needs about 1500MGallon of water.
Most plants use a closed cooling system where warm water coming from condenser is
cooled and reused
Small plants use spray ponds and medium and large plants use cooling towers.
Cooling tower is a steel or concrete hyperbolic structure having a reservoir at the base
for storage of cooled water
11. Height of the cooling tower may be 150 m or so and diameter at the base is 150 m
Feed water heater
Advantages of heating water before feeding back to the boiler:-
a) Feed water heating improves overall plant efficiency.
b) The dissolved oxygen and carbon dioxide which would otherwise cause boiler corrosion
are removed in feed water heater
c) Thermal stresses due to cold water entering the boiler drum are avoided.
d) Quantity of steam produced by the boiler is increased.
Some other impurities carried by the steam and condensate, due to corrosion of boiler and
condenser are precipitated outside the boiler
Economizer
Flue gases coming out of the boiler carry lot of heat. An economizer extracts a part of this heat
from flue gases and uses it for heating feed water. This use of economizer results in saving coal
consumption and higher boiler efficiency
12. Air preheater
After flue gases leave economizer, some further heat can be extracted from them and used to
heat incoming heat. Cooling of flue gases by 20 degree centigrade increases the plant efficiency
by 1%.
Air preheaters may be of three types
Plate type
Tubular type
Regenerative type
WORKING OF THERMAL POWER PLANT
Feed water heater
A feed water heater is a power plant component used to pre-heat water delivered to
a steam generating boiler. Preheating the feed water reduces the irreversibility involved in steam
generation and therefore improves the thermodynamic efficiency of the system. This reduces plant
operating costs and also helps to avoid thermal shock to the boiler metal when the feed water is
introduced back into the steam cycle.
Boiler
A boiler is a closed vessel in which water or other fluid is heated. The heated or vaporized fluid
exits the boiler for use in various processes or heating applications.
Steam condensing
The condenser condenses the steam from the exhaust of the turbine into liquid to allow it to be
pumped. If the condenser can be made cooler, the pressure of the exhaust steam is reduced and
efficiency of the cycle increases.
Electrical Generator
In electricity generation, an electric generator is a device that converts mechanical
energy to electrical energy.
Steam Turbine
13. A steam turbine is a mechanical device that extracts thermal energy from pressurized steam, and
converts it into rotary motion.
Efficiency:
The energy efficiency of a conventional thermal power station, considered as salable energy as a
percent of the heating value of the fuel consumed, is typically 33% to 48%. This efficiency is
limited as all heat engines are governed by the laws of thermodynamics. The rest of the energy
must leave the plant in the form of heat. This waste heat can go through a condenser and be
disposed of with cooling water or in cooling towers. If the waste heat is instead utilized for
district heating, it is called co-generation.
Planning of Power Plant involves decision on two basic parameters:
1. Total power output to be installed (e.g. 1000 MW)
14. Installed capacity is determined from:
• Estimated Demand: - Before setting up a power plant, we need to critically analyze
demand which gives us the idea to determine capacity which needs to be installed.
The installation capacity should match the demand and hence estimation of demand
is the critical fact while setting up a power plant.
• Growth of Demand anticipated: - While determining demand, future prospects needs
to be considered so that the return on capital would be maximized and future demand
could be met easily.
• Reserve Capacity required: - Considering the various type of demand in a market
how much reserve capacity is required to be installed is determined and hence this
will help in determining installation capacity.
2. Size of generating units (e.g. 4 units of 250 MW each)
Size of the generating units will depend on:
• Variation of Load (Load Curve):- During the different hour of the day and in various
seasons the demand varies, so the load curves. Now the number of units has to be
determined to run the operations optimally and meeting the requirement daily.
• Minimum start-up and shut down periods of the units
• Maintenance programme planned
ENVIRONMENTAL IMPACTS OF COAL BASED THERMAL POWER
PLANT
Impact of Thermal PowerPlant on Water Source
Water Intensive
New thermal power plant of 500 MW installed capacity requires – around 14 Million m3
of water per annum.
High impact on river & ground water
15. Water demand for the once-through system is 30 to 50 times that of a closed Cycle system.
Largest emitter of mercury
Typical power plant emits 90 % of its mercury into the air and 10 percent on land
On an average 65 tonnes of mercury released in the atmosphere by Indian Thermal power
plant.
Potential source of water pollution
Cooling Tower Blow Down, Boiler Blow Down, Demineralization (DM)
Plant Effluent, Coal Handling Plant Dust Suppression, Ash handling (Leachate of heavy
metal (ash pond) contaminate groundwater), Effluent from oil handling and transformer
areas, Power House and Turbine Area
Effluent, Domestic waste water
Air pollution due to thermal power plants
Air Pollution from point source:
Particulates matter, Gaseous emission - Sulphur dioxide, oxides of nitrogen, carbon monoxide,
carbon dioxide, Hydrocarbon.
Air Pollution from non-point source:
Transportation of coal, Loading/unloading of fuel, Coal storage yard, Fly ash
Handling & Transportation., Coal storage yard