Ernesto Custorio provides his resume detailing his experience as a Mechanical Piping Engineer and Commissioning Engineer over 19 years working on projects in the Philippines, UAE, Qatar, Kazakhstan, and Saudi Arabia. He has experience in piping fabrication, installation, commissioning, and project management. His objective is to secure a position utilizing his skills and expanding his knowledge of innovative technologies.
This document provides a summary of Ariel Awayan's work experience and qualifications. It outlines over 20 years of experience supervising piping and structural fabrication projects for oil and gas companies. Some key responsibilities included coordinating fabrication activities, ensuring safety compliance, and requesting necessary materials. The document then lists various supervisory roles held over the past two decades involving piping and structural work in locations like Kazakhstan, Russia, Saudi Arabia, and the Philippines. Duties in these roles included planning projects, inspecting work, and supervising teams to meet quality and scheduling goals.
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
This document contains a resume and job history for Ahmad Dodo, a piping supervisor with over 18 years of experience in oil and gas pipeline projects. He has worked on numerous projects in Indonesia, primarily as a piping supervisor responsible for tasks like receiving approved drawings, scheduling fabrication, inspecting materials, supervising installation, and ensuring quality control and safety standards. The resume lists 13 past positions with details of employers, projects, dates, locations and responsibilities held. It demonstrates his strong technical skills and experience in piping fabrication, installation, inspection, and project supervision.
This document provides details about an individual seeking employment as a piping engineer or related role. It includes contact information, career objectives, positions applied for, and descriptions of past relevant employment with companies like Adinin Works & Engineering Sdn. Bhd and Hyundai Engineering & Co. Ltd. on projects in Brunei and Oman. Responsibilities included developing job cards, reviewing drawings, coordinating work, supervising piping activities, and ensuring quality and safety standards were met.
Santhosh Kumar has over 20 years of experience as a senior mechanical engineer working on large infrastructure projects in the United Arab Emirates and India. He has managed all mechanical, electrical, and plumbing aspects of projects, including design, procurement, installation, testing, and commissioning. Some of the key projects he has worked on include natural gas pipelines, district cooling systems, and building mechanical systems. He is proficient in project planning, quality control, budgeting, and ensuring code and regulatory compliance.
Resume gede andi- construction piping supervisorandi dipayadnya
A senior construction supervisor (piping mechanical and structural) with more than 10 years experience in supervisory role, with a good knowledge of piping, structural, welding, rigging-lifting, scaffolding, HSE, etc.
A Competent Mechanical Engineer, seeking middle level assignments in Piping Engineering / Commissioning & Pre-Commissioning with an organisation of repute, preferably in Oil & Gas/ Petrochemicals industry Refinery, Chemical Plants.
Wauren Espinoza Cruz provides a summary of their career highlights and work experience over 13 years in construction project management. They have experience supervising site development, structural works, and steel erection on various industrial plants and infrastructure projects in the Philippines, Malaysia, Saudi Arabia, Qatar, and China. Their roles have included project superintendent, building supervisor, BJ/FIN specialist, module lead, and site engineer with responsibilities like scheduling, quality control, safety compliance, and coordinating subcontractors.
This document provides a summary of Ariel Awayan's work experience and qualifications. It outlines over 20 years of experience supervising piping and structural fabrication projects for oil and gas companies. Some key responsibilities included coordinating fabrication activities, ensuring safety compliance, and requesting necessary materials. The document then lists various supervisory roles held over the past two decades involving piping and structural work in locations like Kazakhstan, Russia, Saudi Arabia, and the Philippines. Duties in these roles included planning projects, inspecting work, and supervising teams to meet quality and scheduling goals.
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
This document contains a resume and job history for Ahmad Dodo, a piping supervisor with over 18 years of experience in oil and gas pipeline projects. He has worked on numerous projects in Indonesia, primarily as a piping supervisor responsible for tasks like receiving approved drawings, scheduling fabrication, inspecting materials, supervising installation, and ensuring quality control and safety standards. The resume lists 13 past positions with details of employers, projects, dates, locations and responsibilities held. It demonstrates his strong technical skills and experience in piping fabrication, installation, inspection, and project supervision.
This document provides details about an individual seeking employment as a piping engineer or related role. It includes contact information, career objectives, positions applied for, and descriptions of past relevant employment with companies like Adinin Works & Engineering Sdn. Bhd and Hyundai Engineering & Co. Ltd. on projects in Brunei and Oman. Responsibilities included developing job cards, reviewing drawings, coordinating work, supervising piping activities, and ensuring quality and safety standards were met.
Santhosh Kumar has over 20 years of experience as a senior mechanical engineer working on large infrastructure projects in the United Arab Emirates and India. He has managed all mechanical, electrical, and plumbing aspects of projects, including design, procurement, installation, testing, and commissioning. Some of the key projects he has worked on include natural gas pipelines, district cooling systems, and building mechanical systems. He is proficient in project planning, quality control, budgeting, and ensuring code and regulatory compliance.
Resume gede andi- construction piping supervisorandi dipayadnya
A senior construction supervisor (piping mechanical and structural) with more than 10 years experience in supervisory role, with a good knowledge of piping, structural, welding, rigging-lifting, scaffolding, HSE, etc.
A Competent Mechanical Engineer, seeking middle level assignments in Piping Engineering / Commissioning & Pre-Commissioning with an organisation of repute, preferably in Oil & Gas/ Petrochemicals industry Refinery, Chemical Plants.
Wauren Espinoza Cruz provides a summary of their career highlights and work experience over 13 years in construction project management. They have experience supervising site development, structural works, and steel erection on various industrial plants and infrastructure projects in the Philippines, Malaysia, Saudi Arabia, Qatar, and China. Their roles have included project superintendent, building supervisor, BJ/FIN specialist, module lead, and site engineer with responsibilities like scheduling, quality control, safety compliance, and coordinating subcontractors.
This document is a curriculum vitae for Baron N Bennington. It lists his contact information, qualifications, and extensive experience in instrumentation and engineering roles for oil and gas companies. He has over 30 years of experience in positions including Metering Team Lead, Principal Instrument Engineer, and Senior Instrument Engineer. His experience includes management, design, installation, and support of metering and instrumentation systems for offshore oil and gas facilities.
Bannichan Savier is an Indian piping superintendent with over 20 years of experience supervising piping projects in Saudi Arabia. He has worked on numerous projects for Saudi Arabian Kentz Co. Ltd. supervising all aspects of piping including fabrication, installation, commissioning, and testing. His responsibilities have included supervising instrumentation installation and ensuring all piping and tubing systems pass pressure and leak tests. He holds an ITI qualification in piping and is currently available for new projects.
This document provides a summary of Delfim Jose Moreira's 28 years of experience in piping industries including power, chemical, steel, and shipbuilding. He has worked as a piping supervisor on numerous projects around the world and has strong skills in design, safety procedures, communication, and team leadership. His experience includes overseeing piping installation, ensuring quality and safety standards, and resolving any issues that arise.
The document is a curriculum vitae for Mr. Thian Chen San that outlines his experience in petrochemical and shipyard industries over the past 20 years. It details his roles in project management, construction coordination, engineering, and planning. He has strong skills in coordinating work between various parties, managing health and safety, and resolving engineering issues in the field. The CV highlights qualifications and courses completed to strengthen his expertise in project management and safety.
Vivencio B. Pachoro is applying for a position as a QC Civil Inspector. He has over 14 years of experience in civil engineering and construction in Qatar and the Philippines, including 8 years in QA/QC roles and 6 years in construction supervision. His experience includes projects for Qatar Shell, Barzan Onshore, and various residential, infrastructure, and oil and gas projects. He is seeking to maintain his role in ensuring construction quality and safety.
Hardeo Safi is an experienced construction manager with over 23 years of experience leading construction teams on captive power plant projects. He has expertise in areas such as pipeline erection, general contracting, subcontractor management, and ensuring construction safety. Throughout his career, Safi has successfully completed numerous projects on time and on budget by collaborating well with clients, coordinating contractors and suppliers, and motivating construction teams. He aims to negotiate a competitive compensation package as an innovative construction manager.
This document provides a summary of Ranny Brandino Ancero's personal and professional details. It includes his contact information, educational background of a Bachelor's degree in Civil Engineering from Mindanao State University, and over 15 years of experience in various roles such as site engineer, QA/QC engineer, and survey engineer for major construction projects in Saudi Arabia and the Philippines. His responsibilities have involved ensuring work quality, safety compliance, and accurate surveying, layout, and installation of structures.
This document provides a summary of Ferdinand Tabaco Cabunoc's work experience and qualifications. He has over 22 years of experience working in construction and engineering projects in the Philippines and Saudi Arabia, holding roles such as civil engineer, safety engineer, project engineer, and field engineer. His experience includes managing water drilling, storm drainage, telecommunications, and housing projects. He has a bachelor's degree in civil engineering and professional engineering licenses in the Philippines and Saudi Arabia.
Sunkara Ganga Swaroop Kumar has nearly 10 years of experience in project construction, fabrication, installation, and quality assurance roles in the building and oil & gas industries. He is currently a Project Engineer at Delimax PTE Ltd in Singapore, working on the Kaombo Norte & Sul Turret E&I scope. His areas of expertise include project management, quality management, tendering & procurement, and ensuring high safety standards. He has worked on several key projects in his career.
This document is a resume for Ibekwe Uche Amanze seeking a senior level position in project management, construction management, or operations and maintenance in the oil, gas or energy sector. It summarizes his 10 years of experience in these areas and lists his educational background which includes a Master's degree in Production Engineering. It also provides details on his skills, areas of expertise, work history and projects handled.
Midel C. Dalangin has over 20 years of experience in piping, structural, and welding inspection, supervision, testing, and commissioning. He has worked on numerous projects around the world, holding positions including Lead Piping Supervisor, Piping Supervisor, Piping Engineer, and Piping Inspector. His resume details his extensive work history and qualifications.
This resume is for Babu Kuniyamkottil, who has over 25 years of experience in construction, installation, testing, commissioning, and maintenance of instrumentation, electrical, telecommunications, and other systems for oil, gas, and infrastructure projects. His most recent role since 2007 has been as a Construction Supervisor and Commissioning Coordinator for Qatar Petroleum, where he oversees instrumentation, telecommunications, fire alarm, and other systems. He holds various qualifications and certifications and is seeking a position as a Construction or Commissioning Manager.
D. Venkatesh has over 33 years of experience in plant maintenance, maintenance planning, and managing projects in the oil and gas industry. He currently works as a Rotating Equipment Analyst for Qatargas Operating Co Ltd in Qatar. Previously, he held positions such as Maintenance Manager for Cairn India Ltd and Senior Engineer for Oryx GTL in Qatar. He has extensive experience managing maintenance for various oil and gas facilities including refineries, LNG plants, gas processing facilities, and wells.
The document provides a summary of experience and employment history for MIDEL C. DALANGIN, including over 20 years of experience in piping, structural, and welding inspection, supervision, and field engineering for oil and gas projects in the Philippines, Singapore, Saudi Arabia, Kazakhstan, Qatar, and within the chemical industry. Key responsibilities involved planning and overseeing piping installation, ensuring safety and quality standards, and managing contractor personnel and schedules.
This document is a curriculum vitae for Filemon G. Lim, a civil engineer from the Philippines. It summarizes his contact information, objective, qualifications, work experience, skills and membership. He has over 20 years of experience in civil engineering projects in the Philippines, United Arab Emirates and Qatar. His most recent role was as a civil engineer for Doha Petroleum in Qatar from 2013 to 2014 where he oversaw civil works for pipeline and station construction projects.
Ashish Trivedi has over 5 years of experience in project planning, resource allocation, quality assurance, and operations in the oil and gas industry. He has extensive knowledge of design, quality control systems, and surface preparation. As a senior project engineer, his responsibilities include project planning, scheduling, monitoring, developing plans to ensure timely completion, and maintaining financial data. He has successfully implemented ERP systems and standardized processes to improve efficiency.
This document provides personal and professional details about Asaad Abd AL Razaq. It includes his name, nationality, marital status, education credentials including a B.Sc in Mechanical Engineering and diploma in Mechanical/Production of Minerals. It outlines over 15 years of experience in industrial construction, piping fabrication and erection. Recent project experience from 2014-2009 is provided working on oil fields and maintenance projects in Iraq. Responsibilities and special training courses are also mentioned.
Jordan Hamid has over 15 years of experience in piping supervision, inspection, and project management roles for major oil and gas, petrochemical, and shipbuilding projects in Malaysia, Singapore, and Nigeria. He has a strong safety record and expertise in piping fabrication, installation, testing, commissioning, and quality control. Hamid is seeking a new position as a piping supervisor, inspector, or project manager to utilize his skills and extensive experience.
Paul Johan Pieters has over 21 years of experience in construction project management in the petrochemical, power, and oil and gas industries in South Africa and Qatar. He has held various roles including civil, structural, and mechanical engineering, welding inspection, foreman, supervisor, superintendent, quality control inspector, field engineer, and senior construction manager. As a construction manager, he is responsible for directing all construction activities including coordinating contractors, ensuring work is completed safely according to specifications, and delivering projects on time and on budget. He has extensive experience in construction execution and management.
Shaikh Nooruddin Yaqubali has over 12 years of experience as a piping supervisor for oil and gas projects. He has worked on numerous projects in the UAE and Saudi Arabia, managing fabrication, erection, welding, and quality control activities. He is knowledgeable in codes and standards like ASME and experienced in tasks like preparing test packs and as-built drawings.
This resume is for Joseph Jaiwin Dass applying for the position of Commissioning Supervisor in oil and gas. He has over 16 years of experience in various roles such as Production Operator, Process Operator, Pre-Commissioning and Commissioning Supervisor in India and abroad. He has extensive experience in commissioning and pre-commissioning activities, startup operations, and overseeing plant operations including safety systems. He also has experience in areas such as well testing, pump operations, gas dehydration units, control systems, and utilities.
This document contains information related to performance evaluation forms and methods for commissioning managers. It includes a sample job performance evaluation form with sections for reviewing performance factors, employee strengths and accomplishments, performance areas needing improvement, and signatures. It also provides examples of performance review phrases for various factors like attitude, decision-making, problem-solving, and teamwork. Finally, it lists and describes the top 12 methods for performance appraisal, including management by objectives, critical incident, behaviorally anchored rating scales, and 360-degree feedback. The document aims to provide useful resources and templates for evaluating commissioning manager performance.
This document is a curriculum vitae for Baron N Bennington. It lists his contact information, qualifications, and extensive experience in instrumentation and engineering roles for oil and gas companies. He has over 30 years of experience in positions including Metering Team Lead, Principal Instrument Engineer, and Senior Instrument Engineer. His experience includes management, design, installation, and support of metering and instrumentation systems for offshore oil and gas facilities.
Bannichan Savier is an Indian piping superintendent with over 20 years of experience supervising piping projects in Saudi Arabia. He has worked on numerous projects for Saudi Arabian Kentz Co. Ltd. supervising all aspects of piping including fabrication, installation, commissioning, and testing. His responsibilities have included supervising instrumentation installation and ensuring all piping and tubing systems pass pressure and leak tests. He holds an ITI qualification in piping and is currently available for new projects.
This document provides a summary of Delfim Jose Moreira's 28 years of experience in piping industries including power, chemical, steel, and shipbuilding. He has worked as a piping supervisor on numerous projects around the world and has strong skills in design, safety procedures, communication, and team leadership. His experience includes overseeing piping installation, ensuring quality and safety standards, and resolving any issues that arise.
The document is a curriculum vitae for Mr. Thian Chen San that outlines his experience in petrochemical and shipyard industries over the past 20 years. It details his roles in project management, construction coordination, engineering, and planning. He has strong skills in coordinating work between various parties, managing health and safety, and resolving engineering issues in the field. The CV highlights qualifications and courses completed to strengthen his expertise in project management and safety.
Vivencio B. Pachoro is applying for a position as a QC Civil Inspector. He has over 14 years of experience in civil engineering and construction in Qatar and the Philippines, including 8 years in QA/QC roles and 6 years in construction supervision. His experience includes projects for Qatar Shell, Barzan Onshore, and various residential, infrastructure, and oil and gas projects. He is seeking to maintain his role in ensuring construction quality and safety.
Hardeo Safi is an experienced construction manager with over 23 years of experience leading construction teams on captive power plant projects. He has expertise in areas such as pipeline erection, general contracting, subcontractor management, and ensuring construction safety. Throughout his career, Safi has successfully completed numerous projects on time and on budget by collaborating well with clients, coordinating contractors and suppliers, and motivating construction teams. He aims to negotiate a competitive compensation package as an innovative construction manager.
This document provides a summary of Ranny Brandino Ancero's personal and professional details. It includes his contact information, educational background of a Bachelor's degree in Civil Engineering from Mindanao State University, and over 15 years of experience in various roles such as site engineer, QA/QC engineer, and survey engineer for major construction projects in Saudi Arabia and the Philippines. His responsibilities have involved ensuring work quality, safety compliance, and accurate surveying, layout, and installation of structures.
This document provides a summary of Ferdinand Tabaco Cabunoc's work experience and qualifications. He has over 22 years of experience working in construction and engineering projects in the Philippines and Saudi Arabia, holding roles such as civil engineer, safety engineer, project engineer, and field engineer. His experience includes managing water drilling, storm drainage, telecommunications, and housing projects. He has a bachelor's degree in civil engineering and professional engineering licenses in the Philippines and Saudi Arabia.
Sunkara Ganga Swaroop Kumar has nearly 10 years of experience in project construction, fabrication, installation, and quality assurance roles in the building and oil & gas industries. He is currently a Project Engineer at Delimax PTE Ltd in Singapore, working on the Kaombo Norte & Sul Turret E&I scope. His areas of expertise include project management, quality management, tendering & procurement, and ensuring high safety standards. He has worked on several key projects in his career.
This document is a resume for Ibekwe Uche Amanze seeking a senior level position in project management, construction management, or operations and maintenance in the oil, gas or energy sector. It summarizes his 10 years of experience in these areas and lists his educational background which includes a Master's degree in Production Engineering. It also provides details on his skills, areas of expertise, work history and projects handled.
Midel C. Dalangin has over 20 years of experience in piping, structural, and welding inspection, supervision, testing, and commissioning. He has worked on numerous projects around the world, holding positions including Lead Piping Supervisor, Piping Supervisor, Piping Engineer, and Piping Inspector. His resume details his extensive work history and qualifications.
This resume is for Babu Kuniyamkottil, who has over 25 years of experience in construction, installation, testing, commissioning, and maintenance of instrumentation, electrical, telecommunications, and other systems for oil, gas, and infrastructure projects. His most recent role since 2007 has been as a Construction Supervisor and Commissioning Coordinator for Qatar Petroleum, where he oversees instrumentation, telecommunications, fire alarm, and other systems. He holds various qualifications and certifications and is seeking a position as a Construction or Commissioning Manager.
D. Venkatesh has over 33 years of experience in plant maintenance, maintenance planning, and managing projects in the oil and gas industry. He currently works as a Rotating Equipment Analyst for Qatargas Operating Co Ltd in Qatar. Previously, he held positions such as Maintenance Manager for Cairn India Ltd and Senior Engineer for Oryx GTL in Qatar. He has extensive experience managing maintenance for various oil and gas facilities including refineries, LNG plants, gas processing facilities, and wells.
The document provides a summary of experience and employment history for MIDEL C. DALANGIN, including over 20 years of experience in piping, structural, and welding inspection, supervision, and field engineering for oil and gas projects in the Philippines, Singapore, Saudi Arabia, Kazakhstan, Qatar, and within the chemical industry. Key responsibilities involved planning and overseeing piping installation, ensuring safety and quality standards, and managing contractor personnel and schedules.
This document is a curriculum vitae for Filemon G. Lim, a civil engineer from the Philippines. It summarizes his contact information, objective, qualifications, work experience, skills and membership. He has over 20 years of experience in civil engineering projects in the Philippines, United Arab Emirates and Qatar. His most recent role was as a civil engineer for Doha Petroleum in Qatar from 2013 to 2014 where he oversaw civil works for pipeline and station construction projects.
Ashish Trivedi has over 5 years of experience in project planning, resource allocation, quality assurance, and operations in the oil and gas industry. He has extensive knowledge of design, quality control systems, and surface preparation. As a senior project engineer, his responsibilities include project planning, scheduling, monitoring, developing plans to ensure timely completion, and maintaining financial data. He has successfully implemented ERP systems and standardized processes to improve efficiency.
This document provides personal and professional details about Asaad Abd AL Razaq. It includes his name, nationality, marital status, education credentials including a B.Sc in Mechanical Engineering and diploma in Mechanical/Production of Minerals. It outlines over 15 years of experience in industrial construction, piping fabrication and erection. Recent project experience from 2014-2009 is provided working on oil fields and maintenance projects in Iraq. Responsibilities and special training courses are also mentioned.
Jordan Hamid has over 15 years of experience in piping supervision, inspection, and project management roles for major oil and gas, petrochemical, and shipbuilding projects in Malaysia, Singapore, and Nigeria. He has a strong safety record and expertise in piping fabrication, installation, testing, commissioning, and quality control. Hamid is seeking a new position as a piping supervisor, inspector, or project manager to utilize his skills and extensive experience.
Paul Johan Pieters has over 21 years of experience in construction project management in the petrochemical, power, and oil and gas industries in South Africa and Qatar. He has held various roles including civil, structural, and mechanical engineering, welding inspection, foreman, supervisor, superintendent, quality control inspector, field engineer, and senior construction manager. As a construction manager, he is responsible for directing all construction activities including coordinating contractors, ensuring work is completed safely according to specifications, and delivering projects on time and on budget. He has extensive experience in construction execution and management.
Shaikh Nooruddin Yaqubali has over 12 years of experience as a piping supervisor for oil and gas projects. He has worked on numerous projects in the UAE and Saudi Arabia, managing fabrication, erection, welding, and quality control activities. He is knowledgeable in codes and standards like ASME and experienced in tasks like preparing test packs and as-built drawings.
This resume is for Joseph Jaiwin Dass applying for the position of Commissioning Supervisor in oil and gas. He has over 16 years of experience in various roles such as Production Operator, Process Operator, Pre-Commissioning and Commissioning Supervisor in India and abroad. He has extensive experience in commissioning and pre-commissioning activities, startup operations, and overseeing plant operations including safety systems. He also has experience in areas such as well testing, pump operations, gas dehydration units, control systems, and utilities.
This document contains information related to performance evaluation forms and methods for commissioning managers. It includes a sample job performance evaluation form with sections for reviewing performance factors, employee strengths and accomplishments, performance areas needing improvement, and signatures. It also provides examples of performance review phrases for various factors like attitude, decision-making, problem-solving, and teamwork. Finally, it lists and describes the top 12 methods for performance appraisal, including management by objectives, critical incident, behaviorally anchored rating scales, and 360-degree feedback. The document aims to provide useful resources and templates for evaluating commissioning manager performance.
Abhay Kamalakar Paranjape is a mechanical engineer with over 27 years of experience in rotating equipment. He is currently a senior engineer at CH2M Hill Energy Canada Ltd in Abu Dhabi. Prior to this, he held positions at Petrofac, UHDE India Pvt Ltd, and KSB Pumps Ltd. He has extensive experience selecting, specifying, and managing rotating equipment and packages for oil and gas projects. His areas of expertise include pumps, compressors, chillers, and other rotating equipment.
Madan Gupta has over 23 years of experience in mechanical engineering for the oil and gas industry. He currently works as a Lead Mechanical Engineer for Lukoil Overseas Service BV in Dubai, where he is responsible for engineering projects including basic and detailed design, procurement, and project management. Prior to his current role, Gupta held several mechanical engineering and project management positions with other companies in the United Arab Emirates and Saudi Arabia. He has extensive experience handling various types of rotating equipment and packaging systems.
The document discusses different types of actuators. Actuators are devices that convert energy into motion. Common types include hydraulic actuators, which use fluid power to produce linear or rotational movement, pneumatic actuators, which use compressed air, and electric actuators like solenoids, motors, and piezoelectric actuators. Actuators are selected based on factors such as the required force, speed, precision, and environment. Actuators play an important role in converting control signals into physical motion in machines and devices.
This resume summarizes M. Saravanan's professional experience and qualifications. He has over 22 years of experience in mechanical engineering, primarily in roles involving rotating equipment selection, specification development, vendor evaluation and project management. His areas of expertise include pumps, compressors, turbines, and other rotating equipment. His most recent role is as Chief Mechanical Engineer at Global Process Systems, where he is responsible for mechanical design quality, resource allocation and project execution.
This curriculum vitae summarizes Noel M. Tabong's experience as an Instrument Technician with over 20 years of experience in electrical and instrumentation work, including 8 years of experience abroad in Saudi Arabia, Ghana, Nigeria, and Angola working on various oil, gas and power plant projects. The CV lists his extensive work history with companies like Bechtel, Daewoo, and Gulf Consolidated Contractors on commissioning, calibration and maintenance of instrumentation systems.
Senguttavan Shanmugam has over 23 years of experience in refinery operations including as a shift supervisor. He currently works as a Shift Supervisor at Yanbu Aramco Sinopec Refinery in Saudi Arabia where he oversees the operation of various units. Previously he has worked for several refineries in India, holding roles such as Shift Supervisor and Console Operator. He has expertise in commissioning and operating various refinery units including CDUs, hydrotreaters, and sulfur recovery units.
SUPERVISOR CV for ONSHORE and OFFSHORE MECHANICAL, MANTENANCE, CONSTRUCTION ...Saleem P.P
This document contains the resume of Saleem Puthiya Ponnambath, who has 27 years of experience in the oil and gas industry in Gulf countries from 1989 to 2016. It lists his contact information, current position as a mechanical supervisor for oil and gas refinery and offshore maintenance, previous positions held, qualifications, certifications, skills, responsibilities and experience in areas like safety, maintenance, fabrication, welding, rigging, scaffolding, coating, testing, and more. It provides details of his educational background, nationality, family status and expectations from prospective employers.
Nitin Mohan Mokal is applying for the position of Rotating Equipment Supervisor. He has over 15 years of experience maintaining rotating equipment such as compressors, pumps, blowers, and gears boxes. Some of his responsibilities include providing supervision over maintenance activities, troubleshooting equipment issues, performing pump seal installations, and assisting with shutdowns and preventative maintenance. He is proficient in maintenance practices for many equipment brands and systems. Previously, he worked as a Senior Mechanical Engineer and Trainee gaining experience repairing and maintaining additional equipment.
This curriculum vitae is for Umeshkumar Mohanlal Desai, who has over 31 years of experience in plant construction, commissioning, maintenance, and preservation. He has worked on numerous major projects for companies like Reliance Industries, Petrofac International, National Petrochemical Industries, and Indorama Petrochemical. Desai has extensive experience maintaining both static and rotating equipment across various industries including petrochemical, oil and gas, and manufacturing.
the presentation includes basic ideas about water pumps, various terminology generally used for the pumps, classification of pumps and ideas about the types its construction and working
Devenir histórico de la novela popular en revistasCatalina Ruiz
El formato de la fotonovela surgió a comienzos del siglo XX en Italia como una forma de promover películas usando fotografías e historias breves. Se popularizó en la década de 1940 cuando publicaciones italianas como Grand Hotel comenzaron a encargar guiones originales para sus fotonovelas, lo que llevó a su adopción masiva. A mediados de siglo, la fotonovela se había establecido como un género híbrido entre el cómic y el cine, que se extendió a otros países y se conv
This document summarizes the key features of the Extended Pascal programming language standard, including:
- Modules and separate compilation capabilities for managing program structure and interfaces.
- Schemata for defining collections of similar types that can be selected statically or dynamically.
- Comprehensive string handling capabilities including variable-length strings.
- Binding of variables to external entities like files.
- Direct access file handling with positioning and updating capabilities.
- Additional language features like constant expressions, structured value constructors, generalized function results, and more.
This document contains a series of photo credits from various photographers and ends by encouraging the reader to create their own presentation on SlideShare using Haiku Deck. The photos are credited to photographers with names like Dave_B_, DoctorButtsMD, CyberHades, @sage_solar, Alejandro Castro, dalbera, giuseppe.costantino, wilbertbaan, and Mnoguagolnik.
The document summarizes events from the Institute for the Study of War's (ISW) discussion on national security and reception honoring General Raymond T. Odierno. The ISW held a discussion on strategic threats to the United States with General Odierno, ISW President Kimberly Kagan, and ISW Board member General David Petraeus. General Odierno received ISW's National Security Leadership Award at a reception attended by ISW supporters, donors, and sponsors from organizations like JPMorgan Chase and Alvarez & Marsal.
Zapraszamy do udziału w roli sponsorwa w Ogólnopolskim Programie Edukacji Zdrowotnej kierowanym do 300 tys. dzieci z szkół podstawowych i 600 000 rodziców.
The document reports on observations of an unexpected peak in the intensity of the generated second harmonic signal from Indium Selenide (InSe) crystals as the crystal thickness is varied. Specifically:
1) Measurements on InSe crystals ranging from 9-25 nm in thickness showed a peak in the second harmonic generation (SHG) intensity at a thickness of around 20 nm, in contrast to the expected quadratic increase with thickness.
2) The researchers developed a simple model taking into account interference between surface and bulk nonlinear optical contributions within the InSe crystals.
3) The model is in good agreement with experimental data and explains the unexpected peak as resulting from high-contrast interference between the surface and bulk contributions to
1) Moffitt Cancer Center provides timely access to a multidisciplinary care team for melanoma patients, allowing diagnosis, staging, and treatment planning to occur in one to two visits. The team reviews pathology reports prior to the first visit to ensure consensus on diagnosis and treatment options.
2) Moffitt streamlines care by having oncologists, dermatologists, surgeons, pathologists, and other providers who are teaching faculty all see patients as part of the comprehensive melanoma care team.
3) Moffitt addresses barriers to care like insurance issues, transportation costs, and travel expenses through dedicated social work support staff to help melanoma patients.
Diosdado Dolocanog is applying for the position of Senior Mechanical Engineer/QA/QC Engineer. He has over 25 years of experience in mechanical engineering, quality control, and project management. His experience includes working on oil and gas projects in Qatar, Saudi Arabia, Taiwan, and the Philippines. He has a bachelor's degree in mechanical engineering and multiple professional certifications.
This document is a curriculum vitae for Renato Bebanco Casinillo that provides details about his education, qualifications, skills, and work experience. It summarizes that he has over 28 years of experience in oil and gas projects involving construction, commissioning, piping, mechanical equipment, and related activities. His most recent role from 2015 to present was as a Piping Superintendent for Saipem Singapore on an FPSO conversion project.
Patrick S. Muga has over 33 years of experience in project management, engineering, construction, and commissioning of oil and gas facilities. He has led multi-disciplinary teams on projects around the world. Muga has expertise in safety management, instrumentation and electrical systems, and project controls. He currently works as a senior project engineer focusing on HSSE, commissioning, and training.
Patrick S. Muga has over 33 years of experience in project management, engineering, construction, and commissioning of oil and gas facilities. He has led multi-disciplinary teams on projects in several countries. Some of his responsibilities have included safety management, budget control, contract administration, and ensuring compliance with regulations. He also has experience training engineers and technicians in instrumentation, safety, and project management.
Nailesh Patel has over 25 years of experience in engineering, construction, and project management for major oil and gas projects. He has worked on fabrication, installation, and commissioning of platforms and has experience in piping, structural engineering, and project management. Some of his responsibilities have included planning engineering activities, maintaining schedules, coordinating procurement, and ensuring safety standards. He has a Bachelor's degree in Production Engineering and has worked for several companies in India, Kuwait, UAE, Indonesia, Singapore, and Brazil.
The document provides details on Jiju Janardanan Nair's 15 years of experience in quality control, inspection, mechanical, welding, painting and non-destructive testing. He has worked with various oil and gas companies on projects involving pipelines, fabrication, and offshore structures. His responsibilities included implementing quality procedures, technical support, inspection, non-destructive testing, and reviewing welding procedures to comply with international codes and standards.
This document provides a summary of Pholapatra Inthalohit's background and experience. It includes their contact information, objective of seeking a project manager or construction manager role, over 20 years of experience in oil/gas, power and infrastructure projects, areas of expertise including project management, and recent experience as site manager for a 90 MW wind farm project in Thailand worth 167 million USD. Responsibilities in that role involve organizing inspections, meetings, overseeing construction quality and schedules, and supervising the team.
This document provides a summary of Joedon Bustillos Cunanan's professional experience and qualifications. He has over 14 years of experience in construction projects in Qatar and the UAE as a site supervisor and site engineer. His roles included overseeing civil works, ensuring safety standards, and coordinating project teams. He has a Bachelor's degree in Civil Engineering and relevant training in areas such as scaffold inspection, first aid, and permit to work procedures.
Josefino Lopez Waje is a civil engineer from the Philippines with over 15 years of experience in the construction industry. He currently works as a senior site inspector for WS Atkins & Partners Overseas in Abu Dhabi. Prior to this, he held roles such as QA/QC engineer, project engineer, and site engineer for companies in Abu Dhabi, Dubai, and Qatar. Waje obtained a Bachelor's degree in Civil Engineering from Don Honorio Ventura Technological State University in the Philippines.
Efren R. Molina has over 18 years of experience as a civil engineer working on various infrastructure projects around the world. His experience includes working as a civil engineer for AECOM Middle East in Qatar from 2015 to present where he was responsible for quality control and inspection activities on a road construction project. Prior to that, he worked for Gusan Construction Company in Saudi Arabia from 2011 to 2014 performing quality assurance and quality control inspections on refinery and power plant projects. He also worked for The Zenitaka Corporation in Uganda from 2010 to 2011 as a quality assurance and quality control engineer rehabilitating hospitals and supplying medical equipment.
This document is a resume for Ghufran Ali Khan, a senior project management professional with 14 years of experience in project management, technical operations, and people management. He has extensive experience leading large, multinational project teams and completing complex projects on schedule. His resume highlights leadership of projects in Qatar, the UAE, and India for various industries including commercial, residential, and infrastructure development.
The document is a 3 page curriculum vitae for Jomy Varghese, an HVAC supervisor with over 25 years of experience in HVAC construction, commissioning, and maintenance. It outlines his educational background and qualifications, employment history with various projects in countries like Kuwait, Iraq, UAE, India, Bahrain, and Saudi Arabia. It also lists his areas of expertise, technical skills, and contact information.
Norazlan bin Mohd Noor provides a summary of his qualifications and experience. He has over 18 years of experience in mechanical, piping, and commissioning engineering. He has worked on numerous offshore oil and gas projects in Malaysia and holds qualifications in mechanical engineering and project management.
Muhammad Asif Khan has over 16 years of experience in project management, operations, and maintenance of HVAC systems. He currently works as a Project Manager for Marine Services Company in Jeddah, Saudi Arabia. Previously, he was a Project Engineer for PreCold Private Company in Karachi, Pakistan. His responsibilities have included planning, executing, installing, and commissioning over 20 HVAC projects in Saudi Arabia. He has strong skills in contract management, procurement, scheduling, budgeting, and using software like Elite, E20-II, and AutoCAD.
Zeonn Koh has over 30 years of experience in various construction and engineering roles. His most recent role was from 2011-2013 as Deputy Construction Lead for the Liwan 3-1 Central Platform Project in China, a joint venture between Husky Oil and CNOOC, where he oversaw construction of a 31,640 ton jacket and 35,000 ton topside. Prior to that, he held roles such as Project Engineer, Construction Superintendent, and Commissioning Lead on various oil and gas, petrochemical, and shipbuilding projects throughout Asia. Zeonn has a strong safety record and aims to complete projects on time and on budget while building good team relationships.
Vignesh Kumar C has over 7 years of experience as a project coordinator and technical inspector in the oil and gas industry. He currently works for Intertek Global coordinating inspection activities for multiple projects in the UAE and globally. He holds a Bachelor's degree in Electronics and Instrumentation Engineering and has experience managing diverse projects with strict deadlines. Vignesh is proficient in inspection documentation, contract management, and maintaining relationships with project stakeholders.
Project Engineer Sunil Kumar Mall has over 22 years of experience managing piping and mechanical projects for major construction firms. He has successfully delivered projects with budgets of $9-12 million. He is skilled at managing cross-company teams and possesses strong technical knowledge of piping, structures, and mechanical operations. He has expertise in supervising engineers and teams through all project stages and a proven track record of integrating systems.
Muhammad Ilyas has over 14 years of experience in civil engineering for oil and gas projects. He has expertise in project design, management, construction, health and safety. He held roles such as site manager, site in-charge, and lead civil engineer on projects involving processing plants, pipelines, well heads, and infrastructure development. He has an MSc in Civil Engineering and safety certifications including NEBOSH-IGC.
Noel Nerosa has over 10 years of experience in piping supervision roles. He has a diploma in marine engineering and various safety and technical certifications. His experience includes supervising piping construction for projects in Qatar, inspecting equipment in the Philippines, and supervising piping work for a refinery project in Saudi Arabia. His responsibilities have involved supervising contractors' work to ensure safety, quality, and timely completion of projects.
Sarawut Pakthong is a 36-year-old Thai national with over 15 years of experience in offshore and coastal construction projects. He holds a Bachelor's degree in Mechanical Engineering and has worked in roles such as Project Engineer, Operations Engineer, and Field Engineer. His experience includes planning and executing offshore installation projects, pipeline installation, and ensuring safety and technical requirements are met. He is currently a Company Authorized Representative for Chevron Thailand overseeing offshore construction and installation projects.
Similar to Ernie Engr. Supervisor or Commissioning Engr. - Updated (20)
Ernie Engr. Supervisor or Commissioning Engr. - Updated
1. ERNESTO HOROS COSTORIO JR.
Upper Cogon, Potohan, Tubigon, Bohol, 6329 Philippines
Mobile : (+63) 9202103604 (Smart Philippines)
(+63) 9272648451 (Globe Philippines)
(+63) 9397985509 (Smart Philippines)
(+63) 9394086943 (Smart Philippines)
Email: ernesto_custorio@yahoo.com
ernesto.custorio@gmail.com
MECHANICAL PIPING ENGR. or SUPERVISOR /COMMISSIONING ENGR. or SUPERVISOR
Objective & Summary
To be able to secure a position such that it will serve not only for the purpose of career advancement but also as
challenge to my knowledge and abilities to gain skills and expand comprehensions on innovative technologies, so to
practice more my profession for the enhancement and development of my 19.3 yrs. (4.6 yrs. Local & 14 yrs.& 7 months.
Abroad)of rich, in-depth, varied experiences in the field of Piping Fabrication, Oil and Gas Mechanical and Piping
Installation, Commissioning, Material and equipment specifications, P&ID development, project coordination and
schedule.
Work Background:
PMT – Project Management Team (Operator):
• Assist for preparation of scope of works for FEED ITB/ITT package, basis of design Mechanical & Piping, and
supervision through conceptual designs to full and complete Engineering packages.
• Review and supervise technical requisition packages prepared by EPC contractor for purchase of equipment and
materials, technical bid evaluation and technical supervision after award of order.
• Supervise Mechanical / Piping scope under EPC contractor and to provide technical support to construction
activities and all aspects of the development construction.
• Liaise and assist with commissioning activities, prepare technical documentation as required.
Construction & Installation:
• Strong ability to supervise all discipline for all Mechanical / Rotating Equipment works such as Pumps,
Compressors, Vessel, Air Coolers, Compressor, Air Claus Blowers and Steam Turbines and Piping Systems.
• Piping works such as Piping Fabrication, Mechanical Equipment and Piping Erection and Installation, Line
checking / Punch listing, Tie-In and Pre-Commissioning activities.
• Capable of managing effectively various assignment
• Knowledge of principles and practices of related discipline.
• Skilled in coordinating efforts with others crafts function.
• Strong ability to cope and interact at all level with the client; consultant; vendors and contractors.
• Job duties include planning, scheduling and providing work direction for all work required.
• Abilities to lead small or large engineering projects from pre design stages to completion.
Commissioning background
1. Pre-commissioning:
• Preparation of pre functional check & punch list, developing in installation period and punch list closing for
commissioning handover.
• Supervise sub-contractor for hydro and pneumatic testing of pipe lines to ensure it meets the required pressure.
• Supervise and monitor the equipment for pigging and air blowing provide technical support to sub-contractor
about cleaning procedure.
• Conduct pipeline internal inspection with client by boroscoping for client witness approval.
• Vessels & Column internal cleaning and installation of blind spacer in the inlet and outlet.
________________________________________________________________________________
_ Ernesto Custorio’s Resumè, Page1 of 6
2. ERNESTO HOROS COSTORIO JR.
Upper Cogon, Potohan, Tubigon, Bohol, 6329 Philippines
Mobile : (+63) 9202103604 (Smart Philippines)
(+63) 9272648451 (Globe Philippines)
(+63) 9397985509 (Smart Philippines)
(+63) 9394086943 (Smart Philippines)
Email: ernesto_custorio@yahoo.com
ernesto.custorio@gmail.com
MECHANICAL PIPING ENGR. or SUPERVISOR /COMMISSIONING ENGR. or SUPERVISOR
• Rotating equipment functional tests, preparation of initial check out plan for electrical / Instrument loop &
continuity check in coordination with electrical and instrument departments etc.
2. Commissioning
• Preparation of pre functional check & punch list, developing an enhanced initial startup and system functional
check out plan, operational test procedures
• Pre-commissioning preparation activities water flushing, air-blowing, steam blowing, pigging, re-instatement,
tightness test, inerting, fire water, deluge system functional test, flare header in service
• Fuel oil & gas, air, & steam utilities in service
• Vessels & Column internal inspection & rotating equipment functional tests, preparation of initial check out plan
for electrical / Instrument loop & continuity check in coordination with electrical and instrument departments etc.
• Start Up Operation
• Before initial startup, check the instrumentation control shutdown logic sequences and interlocks, Establishing
cold circulation then hot circulation for Crude, Plat former unit, CCR, MDEA in sweetening unit, Glycol in
dehydration unit
• Establishing propane circulation and refrigeration unit, pressurization of unit with Nitrogen then startup gas,
controllers fine tuning, equipment’s performance test, tuning process units during plant operations with lab
analysis, unit records by adjusting parameters as per plant load
• Involved in well completion and acceptance testing, operations along with well completion crew before
wellhead Hook-up and commissioning
• Well Head Operation
• Wellhead oil & gas production control on wellhead choke valve or manifold
• Line –up flow line to test of Base Oil line loading from Jetty to Plant Tank Farm.
• Line-up flow line to Test Separators to check BSW content of new well & routine test
• Maintain right amount of Chemical Emulsifier injection for good water oil separation
• Injection of Glycol to gas lines to prevent hydrate formation
• Inject corrosion inhibitors to prevent corrosion formation
• Gas lifts injection operation to the depleted wells
• Maintain Gas compression (Dresser- Rand) or driven by Ruston gas Turbine
Gas lift by injecting Natural gas to increase the oil production (To enhance the oil Recovery)
Duties and Responsibilities:
Piping and Mechanical Engineer providing erection/construction planning and engineering execution that supports
contractors/subcontractors on field line management and supervision; Coordinate multidiscipline engineering interaction
and interfaces particularly Electrical/Instrumentation, Civil/Structural, Material Management, Project Engineering, and
Process activities to be certain on timely completion of engineering deliverables, and ensure documentation are in
accordance with contract, and specifications; Manage Piping Project interfaces with other projects and facilities, and
liaise with Operations representatives to ensure requirements are taken into account during project execution; Ensure that
construction is performed in accordance with the Piping FEED specifications and/or approved variations that meets
project contractual, statutory and regularly requirements; Carry out activities associated with Piping construction, pre-
commissioning and commissioning of facilities (e.g. preparation of construction drawing/documents, site construction
and installation, hook-up, pre-start up audits, as-built drawings); Provide proposal inputs and conceptual Piping design
and participate in the preparation of tender documents for EPIC contracts; Direct supervision and motivate the Piping
project team members whilst ensuring that the control procedures are in operation and reporting functions are
established; Stand as a focal point for all communications with the client, and represent the company in all matters during
project execution; Ensure Piping project scope implementation and effective construction management up to project hand
over to the client; Monitor performances of Piping skilled personnel Productivity, and Quality to ensure the achievement
3. ERNESTO HOROS COSTORIO JR
Cogon, Pooc Oriental, Tubigon Bohol, 6329 Philippines
Mobile : (+63) 9202103604 (Smart Philippines)
(+63) 9272648451 (Globe Philippines)
(+63) 9397985509 (Smart Philippines)
(+998) 932036532 (Uzbekistan)
Email: ernesto_custorio@yahoo.com
ernesto.custorio@gmail.com
MECHANICAL PIPING ENGR. or SUPERVISOR /COMMISSIONING ENGR. or SUPERVISOR
of Project Completion Schedule (PCS) on time; Carry out Facilities Engineering activities relating to a project's
multidisciplinary nature, including discipline and inter-discipline review of design deliverables, participation in
HAZOP/HAZID, and design reviews; Promote safety awareness and safe performance among project team members,
including consultants and contractor personnel; Prepare project expenditure, over all planning and budgetary forecast;
Monitoring and coordination approval for all specification/design change controls; Coordinate erection and construction
interfaces with contractor / subcontractor personnel and commissioning, start up and operation teams on site facilities
regarding adherence to contract specifications, field modifications/revisions, safety requirements, planning,
implementation and execution of erection/construction activities; Provide engineering constructability inputs for
technical and execution issues; Provide inputs in review and development of contractor’s detailed plans in sequencing
and completing construction works with emphasis to minimize production shutdowns of lines producing facilities;
Initiate and coordinate audits for the construction team and participate in construction and project engineering related
audits; Keep site management advised of progress, issues and major developments on site; Supervision of material
procurement aspects from Piping material Take-Off, estimates, and ex-works to delivery at site ensuring adequate
monitoring/tracking of materials/equipment usage and reconciliation during and after project execution; Knowledge with
International Codes and practices (API, ASME, ASTM, ANSI, BS, etc.); Provide computer controlled program on
progress and reports that suites on client requirement; Planning for daily, weekly, and monthly activities at the same time
monitoring by providing Data and S-Curve for progress report measurement basing on over all construction plan;
Execution and Control for the mobilization of required materials and equipment for the planned activities; To provide/co-
ordinate responses to Contractors Technical Queries during project conceptual and detail design phases; Initiation of
corrective actions of Site Queries required for anticipated construction delinquent delays; Monitor and ensure adherence
to the quality system for the construction team, including proper handling and maintaining QA/QC documentation in
close cooperation with the QA/QC department; Coordination with QC and Planning inspectors for timely performance of
quality inspection and planning monitoring for the updated resolution of progress measurement.
Education & Professional Affiliation
1990-1995 - BACHELOR OF SCIENCE IN MECHANICAL ENGINEERING
ST. PETER’S COLLEGE, ILIGAN CITY, PHILIPPINES
WORK EXPERIENCE:
• April 2014 – Mar. 2015
PIPING SUPERVISOR
SAMSUNG ENGINEERING COMPANY LIMITED
UGCC (USYURT GAS CHEMICAL COMPLEX) GSP.(GAS SEPARATION PLANT) PP (POLYMER PLANT),
HDPE(HIGH DENSITY POLYETHELANE PANT) & HEXANE RECOVERY PROJECT
ACHALOK, KARAPALPAKISTAN, UZBEKISTAN
• Oct. 2012 - Dec.2013
PIPING SUPERVISOR
TARGET ENGINEERING AND CONSTRUCTION COMPANY
GASCO (NGI PURE CASE PROJECT)
Habshan, Abu Dhabi, UAE.
• Mar. 2011 – Aug. 2012
MECHANICAL &MAINTENANCE SUPERVISOR
Company: ILIGAN CEMENT CORPORATION
KIWALAN, ILIGAN CITY, 9200 PHILIPPINES
• Dec.2007- Dec 2010
KELLOGS BROWN & ROOT/INDUSTRIAL MAINTENANCE INTERNATIONALLTD.
(JK) SHELL PEARL GTL PROJECT
________________________________________________________________________________
_ Ernesto Costorio’s Resumè, Page3 of 6
Dec 2007– Dec2010
4. ERNESTO HOROS COSTORIO JR.
Upper Cogon, Potohan, Tubigon, Bohol, 6329 Philippines
Mobile : (+63) 9202103604 (Smart Philippines)
(+63) 9272648451 (Globe Philippines)
(+63) 9397985509 (Smart Philippines)
(+63) 9394086943 (Smart Philippines)
Email: ernesto_custorio@yahoo.com
ernesto.custorio@gmail.com
MECHANICAL PIPING ENGR. or SUPERVISOR /COMMISSIONING ENGR. or SUPERVISOR
MECHANICAL/ PIPING SUPERVISOR and COMMISSIONING SUPERVISOR
Ras-Laffan Industrial City, State of Qatar
• Sept. 2006 – Sept. 2007
PIPING INSPECTOR / QA-QC ENGINEER
LAFFAN REFINERY PROJECT
GS DAEWOO CONSURTIUM (DAEWOO ENGINEERING & CONSTRUCTION COMPANY)
Ras-Laffan Industrial City,State of Qatar
• June 2004 – July. 2006
MECHANICAL/ PIPING SUPERVISOR and COMMISSIONING SUPERVISOR
FLOUR DANIEL INTERNATIONAL LLC.(TENGIZCHEVROIL) (TCO)
PROJECT: TCO ASSET DEVELOPMENT PROJECTS (SGI) Sour Gas Injection & (SGP) Second Generation
Project, Tengiz, Republic of Kazakhstan
• Nov. 2002 – Mar. 2004
Position: Piping /Mechanical Supervisor
Company: RAYMOND SAUDI ARABIA LTD.
PROJECT: SAFCO IV UREA AND AMMONIA PLANT, Jubail, KSA
Mar, 1998 - Sept 2002
Mechanical / Piping Engineer
Company: MOHAMMED AL-MOJIL GROUP OF COMPANIES
Sept. 2000 - Sept 2002, PROJECT: JUBAIL UNITED PETROCHEMICAL COMPANY, Jubali, KSA
June 1999 – July 2000, PROJECT: KEMYA OLIFINS PETROCHEMICAL COMPANY, Jubail, KSA.
Mar. 1998 – May 1999, PROJECT: YANBU PETROCHEMICAL EXPANSION PROJECT, Yanbu, KSA
• Dec. 1995 – Jan. 1998
Position: Mechanical Supervisor/ Maintenance Supervisor
Company: MINDANAO PORTLAND CEMENT CORPORATION
KIWALAN, ILIGAN CITY, 9200 PHILIPPINES
REFERENCES:
NIELL O’CONNELL
Project Director
JK Shell Pearl GTL (C7)
• DAVID ELLIOT
Senior Construction Manager
JK Shell Pearl GTL (C7)
• Y. T. HWANG
QA/QC Manager Daewoo
GS DAEWOO Consurtium
• N. K. HAN
Piping Department Manager
Samsung Engineering Company Limited
• Y. W. PARK
5. ERNESTO HOROS COSTORIO JR
Cogon, Pooc Oriental, Tubigon Bohol, 6329 Philippines
Mobile : (+63) 9202103604 (Smart Philippines)
(+63) 9272648451 (Globe Philippines)
(+63) 9397985509 (Smart Philippines)
(+998) 932036532 (Uzbekistan)
Email: ernesto_custorio@yahoo.com
ernesto.custorio@gmail.com
MECHANICAL PIPING ENGR. or SUPERVISOR /COMMISSIONING ENGR. or SUPERVISOR
Piping Department Manager
Samsung Engineering Company Limited
TRAINING AND CERTIFICATES
• QATAR GAS COMPANY
H2S /BA CERTIFICATE
March 25 , 2007 to March 24, 2007
• FUTURE PIPE INDUSTRIES
March 8, 2007 to March 31, 2009
JK QATAR SHELL PEARL GTL
Qatar Pearl GTL Leadership Training
Module 1 Introduction to HSE and Leadership (12 Feb., 2009)
Module 2 Supervision within Life Critical Activities (21 Feb., 2009)
Module 3 Train the Trainer (1 Feb., 2009)
Module 4 Incident and injury free, Supervisor skill and knowledge (14 Mar., 2009)
Module 5 Practical Leadership (5 Mar., 2009)
Module 6 Flawless start-up, TSTI, PTW (25 Mar., 2009)
Module 7 Communicating in a Multi-cultural workplace (12 Feb., 2009)
Module 8 Quality Control (30 Mar., 2009)
Module 9 Organizing and Planning (12 Feb., 2009)
QATAR INTERNATIONAL SAFETY CENTRE W.L.L.
Defensive Driving Course
January 19, 2008 to January 18, 2010
DOLPHIN ENERGY (Permit to Work) Performing Authority Signatory
QATAR SHELL PEARL GTL (Permit to Work) Performing Authority Signatory
PERSONAL DATA:
Address: Cogon Pooc Oriental, Tubigon Bohol, 6329 Philippines
Date of Birth: October 18, 1971
Place of Birth Larapan, Linamon, Lanao Del Norte
Height: 5’4
Weight: 70 kgs
Sex: Male
Marital Status: Separated
Religion: Roman Catholic
Passport No: EB3230731
Driver License No: 27160804316 (Qatar)
Driver License No: G03-06-00207 (Phils.)
SKILLSACQUIRE:
Microsoft Excel, Word, Power Point, &Visio
I hereby certify that the above information is true and correct to the best of my knowledge.
________________________________________________________________________________
_ Ernesto Costorio’s Resumè, Page5 of 6