This document discusses safety measures for construction workers involved in metro tunnel projects. It begins with an introduction to tunnel construction and the safety risks involved. It then outlines the objectives and methodology of the research, which includes a literature review, case studies of metro tunnel projects, and a survey of current safety practices. The literature review identifies common accident causes in excavation work and necessary safety precautions. Case studies of metro tunnel projects in Delhi, Pune, Shanghai and others are presented to analyze safety measures and accidents. A comparative analysis finds that in some cases, limited timeframes have led contractors to violate safety standards. The research aims to develop effective risk management strategies to reduce hazards for tunnel workers.
This article presents a design appraisal for the construction of a water off-take channel following Construction
Design and Management regulations (CDM). Furthermore, a case study to pump water from River Tay near the
village of Luncarty requires the construction of a water off-take channel (abstraction channel). An initial section plan of water abstraction scheme has been conducted. The design will be reviewed by taking into consideration the main concerns regarding Health and Safety concerning Construction Design and Management Regulations (CDM) 2007 and its amendments in 2015. Mostly, the greatest attention will be given to the construction stage of the project where these concerns will be questioned in terms if they can be catered for in designing the water take-off channel.
Implementation of construction safety in reinforced concrete constructions ex...eSAT Journals
Abstract In order to achieve the purpose of this research, a special questionnaire were designed to fulfill the task of this research, exemplified the subject of safety where what is supposed to be present in the workplace and means of prevention that contribute to raising the safety and industrial security degree rate to the highest level, based on the regulations and safety standards followed in Saudi Arabia, compared to what is the case they have both in field sites or within constructions, the questionnaire has been distributed in some construction projects distributed in different places located in Kingdom of Saudi Arabia, and has been narrowed in the building and construction sector category, then study what came in its provisions, for the purpose of the process of analyzing, and to study the causes of accidents, in order to achieve the aim of this research. Keywords – Safety, Constructions and Safety, Minimizing Accident, Construction Management
DEMOLITION OF BUILDINGS: INTEGRATED NOVEL APPROACHA Makwana
Every civil engineering structure is designed for a certain life period generally 100 years. After that the existence of a structure is very dangerous and unstable, which may cause a severe impact and be a cause of many deaths. So removal of such structures with proper safety measures has got great importance. Before any demolition of any type is employed in an area, it is vital that the rescue phase has ended completely. The rescue teams must have given clear information to the contractors that their rescue phase is finished in the selected area, since any demolition work carried out may reveal survivors. Such situations are highly sensitive and must be respected. A major disaster has an economic effect on the local region since the loss of buildings, lifelines and infrastructure results in a slump in the local economy. It is therefore important to boost the economy by employing as much local expertise and workforce as possible. This creates a unity in rehabilitation in the community and results in a more stable recovery. Due to this scenario, the demolition work should be carried out by a consortium, especially set up to do the work rather than commissioning the work to individual companies. This consortium must be set up in regions of high seismic risk to ensure rapid formation after a disaster. This will combat the eventual competitiveness of the large financial investors in the community which could result in a monopoly controlled by certain individuals. It would therefore be preferable to have a local demolition joint-venture to generate the needed local income after a disaster. There will, however, be a certain need for outside managerial and consultancy aid, especially in the developing countries, and this must be acknowledged and respected. The cooperation with the outside aid must be extensive and at a high level in conjunction with the local representatives so as to maintain as much of the local culture and style as possible. The outside consultants must be cautious when introducing major resources, such as machinery, into the post-disaster phases since this may be seen as taking work away from local resources.
This article presents a design appraisal for the construction of a water off-take channel following Construction
Design and Management regulations (CDM). Furthermore, a case study to pump water from River Tay near the
village of Luncarty requires the construction of a water off-take channel (abstraction channel). An initial section plan of water abstraction scheme has been conducted. The design will be reviewed by taking into consideration the main concerns regarding Health and Safety concerning Construction Design and Management Regulations (CDM) 2007 and its amendments in 2015. Mostly, the greatest attention will be given to the construction stage of the project where these concerns will be questioned in terms if they can be catered for in designing the water take-off channel.
Implementation of construction safety in reinforced concrete constructions ex...eSAT Journals
Abstract In order to achieve the purpose of this research, a special questionnaire were designed to fulfill the task of this research, exemplified the subject of safety where what is supposed to be present in the workplace and means of prevention that contribute to raising the safety and industrial security degree rate to the highest level, based on the regulations and safety standards followed in Saudi Arabia, compared to what is the case they have both in field sites or within constructions, the questionnaire has been distributed in some construction projects distributed in different places located in Kingdom of Saudi Arabia, and has been narrowed in the building and construction sector category, then study what came in its provisions, for the purpose of the process of analyzing, and to study the causes of accidents, in order to achieve the aim of this research. Keywords – Safety, Constructions and Safety, Minimizing Accident, Construction Management
DEMOLITION OF BUILDINGS: INTEGRATED NOVEL APPROACHA Makwana
Every civil engineering structure is designed for a certain life period generally 100 years. After that the existence of a structure is very dangerous and unstable, which may cause a severe impact and be a cause of many deaths. So removal of such structures with proper safety measures has got great importance. Before any demolition of any type is employed in an area, it is vital that the rescue phase has ended completely. The rescue teams must have given clear information to the contractors that their rescue phase is finished in the selected area, since any demolition work carried out may reveal survivors. Such situations are highly sensitive and must be respected. A major disaster has an economic effect on the local region since the loss of buildings, lifelines and infrastructure results in a slump in the local economy. It is therefore important to boost the economy by employing as much local expertise and workforce as possible. This creates a unity in rehabilitation in the community and results in a more stable recovery. Due to this scenario, the demolition work should be carried out by a consortium, especially set up to do the work rather than commissioning the work to individual companies. This consortium must be set up in regions of high seismic risk to ensure rapid formation after a disaster. This will combat the eventual competitiveness of the large financial investors in the community which could result in a monopoly controlled by certain individuals. It would therefore be preferable to have a local demolition joint-venture to generate the needed local income after a disaster. There will, however, be a certain need for outside managerial and consultancy aid, especially in the developing countries, and this must be acknowledged and respected. The cooperation with the outside aid must be extensive and at a high level in conjunction with the local representatives so as to maintain as much of the local culture and style as possible. The outside consultants must be cautious when introducing major resources, such as machinery, into the post-disaster phases since this may be seen as taking work away from local resources.
Trenchless Technology is the the science science of installing, repairing and renewing underground pipes, ducts and cables using techniques which minimize or eliminate the need for excavation.
It is basically basically making a tunnel below the surface and installing service lines like water or gas pipes, pipes, electric or tele communication cables etc.,with out any disruption to the public .
Erau webinar january 2017 airport construction ERAUWebinars
Slides from an Embry-Riddle Aeronautical University webinar presented Jan. 12, 2017. Airports are a lot like miniature cities - dynamic, complex and expansive, with lots of moving parts, and disruptive incidents that need to be managed daily. Airports operate 24 hours a day, 7 days a week so terminals and facilities must continue to operate safely while construction work is going on. Construction sites combine powerful mobile equipment and tools, heavy materials, and human beings, all placed within a crowded work space. This is a formula for accidents. This webinar looks at airport safety and security, preventing and controlling accidents and hazards, and keeping airport construction projects on schedule.
International Journal of Computational Engineering Research (IJCER) ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology
A CONSTRUCTION SITE HAS NUMEROUS RISKS ASSOCIATED WITH IT STARTING FROM THE PRELIMINARY STAGE TO ITS FINAL STAGE.
HERE IS AN ASSESSMENT OF RISK & HAZARDS ASSOCIATED WITH AN UNDER-CONSTRUCTION METRO PROJECT WITH PICTURES & ITS DESCRIPTION
Trenchless Technology is the the science science of installing, repairing and renewing underground pipes, ducts and cables using techniques which minimize or eliminate the need for excavation.
It is basically basically making a tunnel below the surface and installing service lines like water or gas pipes, pipes, electric or tele communication cables etc.,with out any disruption to the public .
Erau webinar january 2017 airport construction ERAUWebinars
Slides from an Embry-Riddle Aeronautical University webinar presented Jan. 12, 2017. Airports are a lot like miniature cities - dynamic, complex and expansive, with lots of moving parts, and disruptive incidents that need to be managed daily. Airports operate 24 hours a day, 7 days a week so terminals and facilities must continue to operate safely while construction work is going on. Construction sites combine powerful mobile equipment and tools, heavy materials, and human beings, all placed within a crowded work space. This is a formula for accidents. This webinar looks at airport safety and security, preventing and controlling accidents and hazards, and keeping airport construction projects on schedule.
International Journal of Computational Engineering Research (IJCER) ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology
A CONSTRUCTION SITE HAS NUMEROUS RISKS ASSOCIATED WITH IT STARTING FROM THE PRELIMINARY STAGE TO ITS FINAL STAGE.
HERE IS AN ASSESSMENT OF RISK & HAZARDS ASSOCIATED WITH AN UNDER-CONSTRUCTION METRO PROJECT WITH PICTURES & ITS DESCRIPTION
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.