Engine Mapping And Calibration USA
•
2 likes•381 views
MAHLE Powertrain has extensive experience providing engine and vehicle calibrations for all fuel types, from diesel to gaseous, including for high performance race engines. Their facilities and software tools ensure project success even with compressed development timelines. They offer engine mapping, diagnostics, validation, driveability, and emissions testing services using modeling, automated testing, and proprietary data collection tools.
Report
Share
Report
Share
Download to read offline
Recommended
Engine Calibration - General
The document discusses model-based calibration using MathWorks' Model-Based Calibration Toolbox software. It provides an overview of the model-based calibration process and examples of using it to optimize calibrations for diesel and gasoline engines. Customer examples are presented from companies like Ford, Toyota, John Deere, and GM Holden that demonstrate reducing testing needs and developing optimal engine maps.
Diesel Engine Calibration
This document provides an agenda for a calibration tool training course. It discusses designing experiments to collect engine response data, loading and sorting the experimental data, building models of engine responses like brake torque and emissions, and using those models to produce optimized calibration tables through numerical optimization. The goal is to minimize mode-weighted brake specific fuel consumption subject to constraints on emissions and operating limits, by optimizing injection timing, fuel amount, pressure, variable geometry turbocharger position, and exhaust gas recirculation parameters. The results will include optimized main injection timing, fuel amount, fuel pressure, exhaust gas recirculation mass fraction, and variable geometry turbocharger position tables.
Spark Ignition Engine Calibration
The document describes using a model-based calibration toolbox to optimize the calibration of a turbocharged engine with variable cam phasing and intake valve lift. It involves designing experiments to collect engine performance data, building models from the data, and using the models to produce optimized calibration tables that maximize torque while satisfying constraints. The process results in optimal settings for spark timing, cam angles, air-fuel ratio, intake valve lift, and turbocharger vane position across the engine's operating range.
Shanghai Automotive - Application of Process Automation and Optimisation
The Application of Process Automation and Optimisation in the Rapid Development of New Passenger Vehicles at SAIC Motors - a Technical Engineering & Analysis Paper from Altair ProductDesign
KBACE Learning Platform Webinar
View slides from the KBACE Learning Platform Webinar that discusses Oracle Tutor, Oracle UPK, and Oracle Learning Management
IRJET- Enhancing Line Efficiency of Road Machinery Assembly Line at Volvo...
This document discusses enhancing the line efficiency of an assembly line that produces road machinery at Volvo Construction Equipment in Bengaluru, India. It begins by describing the existing assembly line layout, which includes 7 main assembly stations and 9 feeder stations. The objectives are to determine the current efficiency and improve it using line balancing techniques. Time studies were conducted to collect processing times for tasks. Heuristic techniques like Ranked Positional Weight method, Largest Candidate Rule method, and Kilbridge and Wester Column method were then used to rebalance the line and assign tasks in a way that meets precedence and cycle time constraints while minimizing balance delay. The goal is to deliver products to customers faster while maintaining quality.
HTC 2012 Durability Training
The document outlines an agenda for a vehicle durability workshop discussing HyperWorks software applications. The agenda includes introductions to HyperWorks capabilities like MotionView, MotionSolve, and CD-Tire for durability modeling. It also highlights a customer breakout session featuring presentations from Honda and Fraunhofer on full-vehicle simulations and tire modeling. Application examples are provided showing how customers use HyperWorks for fatigue validation of vehicle components through multi-body dynamics simulations that closely match real-world test data.
Vehicle Testing USA
MAHLE Powertrain provides vehicle testing services in the USA, including vehicle preparation, fleet operations, instrumentation, and emissions testing. Their EPA and CARB certified laboratory includes an all-wheel drive dynamometer, emission testing systems, and equipment to perform fuel economy and vehicle development testing. The company aims to help customers meet testing needs for vehicle development, emissions compliance, and fuel economy accuracy.
Recommended
Engine Calibration - General
The document discusses model-based calibration using MathWorks' Model-Based Calibration Toolbox software. It provides an overview of the model-based calibration process and examples of using it to optimize calibrations for diesel and gasoline engines. Customer examples are presented from companies like Ford, Toyota, John Deere, and GM Holden that demonstrate reducing testing needs and developing optimal engine maps.
Diesel Engine Calibration
This document provides an agenda for a calibration tool training course. It discusses designing experiments to collect engine response data, loading and sorting the experimental data, building models of engine responses like brake torque and emissions, and using those models to produce optimized calibration tables through numerical optimization. The goal is to minimize mode-weighted brake specific fuel consumption subject to constraints on emissions and operating limits, by optimizing injection timing, fuel amount, pressure, variable geometry turbocharger position, and exhaust gas recirculation parameters. The results will include optimized main injection timing, fuel amount, fuel pressure, exhaust gas recirculation mass fraction, and variable geometry turbocharger position tables.
Spark Ignition Engine Calibration
The document describes using a model-based calibration toolbox to optimize the calibration of a turbocharged engine with variable cam phasing and intake valve lift. It involves designing experiments to collect engine performance data, building models from the data, and using the models to produce optimized calibration tables that maximize torque while satisfying constraints. The process results in optimal settings for spark timing, cam angles, air-fuel ratio, intake valve lift, and turbocharger vane position across the engine's operating range.
Shanghai Automotive - Application of Process Automation and Optimisation
The Application of Process Automation and Optimisation in the Rapid Development of New Passenger Vehicles at SAIC Motors - a Technical Engineering & Analysis Paper from Altair ProductDesign
KBACE Learning Platform Webinar
View slides from the KBACE Learning Platform Webinar that discusses Oracle Tutor, Oracle UPK, and Oracle Learning Management
IRJET- Enhancing Line Efficiency of Road Machinery Assembly Line at Volvo...
This document discusses enhancing the line efficiency of an assembly line that produces road machinery at Volvo Construction Equipment in Bengaluru, India. It begins by describing the existing assembly line layout, which includes 7 main assembly stations and 9 feeder stations. The objectives are to determine the current efficiency and improve it using line balancing techniques. Time studies were conducted to collect processing times for tasks. Heuristic techniques like Ranked Positional Weight method, Largest Candidate Rule method, and Kilbridge and Wester Column method were then used to rebalance the line and assign tasks in a way that meets precedence and cycle time constraints while minimizing balance delay. The goal is to deliver products to customers faster while maintaining quality.
HTC 2012 Durability Training
The document outlines an agenda for a vehicle durability workshop discussing HyperWorks software applications. The agenda includes introductions to HyperWorks capabilities like MotionView, MotionSolve, and CD-Tire for durability modeling. It also highlights a customer breakout session featuring presentations from Honda and Fraunhofer on full-vehicle simulations and tire modeling. Application examples are provided showing how customers use HyperWorks for fatigue validation of vehicle components through multi-body dynamics simulations that closely match real-world test data.
Vehicle Testing USA
MAHLE Powertrain provides vehicle testing services in the USA, including vehicle preparation, fleet operations, instrumentation, and emissions testing. Their EPA and CARB certified laboratory includes an all-wheel drive dynamometer, emission testing systems, and equipment to perform fuel economy and vehicle development testing. The company aims to help customers meet testing needs for vehicle development, emissions compliance, and fuel economy accuracy.
TenYearsCPOptimizer
The document discusses the history and capabilities of CP Optimizer, a constraint programming engine developed by IBM for scheduling problems. It was first released in 2007 and is now on version 12.8. CP Optimizer is used for scheduling applications across various industries and is part of CPLEX Optimization Studio. The document outlines key features like simplified modeling, automatic search, and interfaces in multiple programming languages.
CPLEX 12.5.1 remote object - June 2013
This presentation discusses advances in CPLEX 12.5.1 with special attention to using the remote object facility for building advanced distributed memory optimization algorithms. Performance improvements in CPLEX 12.5.1 complete the presentation.
ITG whitepaper: Value Proposition for AIX on IBM Power Systems: Ownership Exp...
ITG whitepaper: Value Proposition for AIX on IBM Power Systems: Ownership Exp...IBM India Smarter Computing
This document discusses the value proposition of consolidating SAP workloads onto IBM POWER7-based systems compared to x86 server consolidation using VMware. It finds that for three companies analyzed, three-year IT costs were 14-46% lower when using POWER7, averaging 39% lower costs than x86 servers. It also finds that costs of downtime were 58-77% lower on POWER7, averaging 74% lower. These cost savings are achieved through the higher performance, workload management capabilities, availability features, and consolidation densities of POWER7-based systems for running complex, virtualized SAP workloads.Energen (Energy & Utilities,Oracle/SAP/Power,SUN)
Energen achieved $500,000 in annual savings by migrating its Oracle and SAP software from 20 Sun servers to 2 IBM System p5 570 servers. This reduced hardware costs through lower Oracle licensing fees and consolidation. It also improved performance, cutting batch run times from 24 hours to 2 hours, and improved support with IBM's local presence. The migration virtualized the SAP environment using logical partitions, allowing systems to efficiently share resources.
2013 OTM EU SIG: Integrating SAP with OTM Presentation
The document discusses integrating SAP with OTM. It provides background on SAP and OTM history, highlights key design considerations, and common challenges. The real challenge is to fully understand the end-to-end supply chain business process and requirements to define necessary system support. Clarifying business ownership of supply chain segments and addressing pressures on the IT landscape are also important.
VLSID_2015_DSE_HMP_v3
The document discusses the problem of heterogeneous multicore processor (HMP) composition and configuration selection. Emerging HMPs will contain diverse core types, memories and accelerators. This leads to a very large design space of possible HMP configurations. The goal is to explore this design space and select the optimal configuration for goals like performance maximization or energy efficiency maximization, subject to constraints like area. This is a challenging optimization problem due to the extremely large design space involving different core types and numbers. The paper proposes a cross-layer approach to tackle this problem.
Oracle Transportation Management Customer Case Study
Macsteel Service Centers USA is a leading metals processor and distributor with over 30 locations in North America. They implemented Oracle EBS R12 and Oracle Transportation Management (OTM) to standardize processes, replace legacy systems, and gain efficiencies. Some key benefits seen include better management of shipping costs and carrier rates/contracts. However, challenges included a steep learning curve for their user base and additional labor needs. Next steps include further automating processes and expanding the use of OTM and analytics capabilities.
Otm con8766 pdf_8766_0001
Unilever implemented Oracle Transportation Management (OTM) to standardize and optimize its North American inbound and outbound transportation processes. The multi-year project involved rolling out OTM to 29 plants, 29 distribution centers, 164 co-packers, and over 800 suppliers across the US and Canada. While the implementation faced some challenges around dock scheduling, carrier EDI connectivity, and rate data issues, the initial pilot helped address many of these. Current focus areas include improving system integration between OTM and SAP, setting up EDI for ocean shipments, and leveraging OTM's optimization capabilities.
Recent MIP Performance Improvements in IBM ILOG CPLEX Optimization Studio
This Virtual User Group session, held on 2014-01-22, presents some of the techniques and algorithms used to improve the CPLEX MIP solver in versions 12.5.1 and 12.6.
Mechanical Simulations for Electronic Products
As electronic devices become smaller and more ubiquitous, the printed circuit boards and components that drive them face increasing power densities and evermore complexity. To ensure product reliability and performance, accurate and detailed analysis methodologies are necessary.
Complex Logistics Use Cases - OTM Myths
Traditional TMS has not ventured into the world of more specialist logistics solutions such as Air, Rail networks and Postal services. However more and more we are seeing OTM being delivered in these industries across Europe . In the presentation we will demonstrate with use cases how OTM is being applied in these complex, previously off limits industries.
Accelerating the Development of Efficient CP Optimizer Models
The IBM Constraint Programming optimization system CP Optimizer was designed to provide automatic search and a simple modeling of discrete optimization problems, with a particular focus on scheduling applications. It is used in industry for solving operational planning and scheduling problems. We will give an overview of CP Optimizer and then describe in further detail a set of features such as input/output file format, warm-start or conflict refinement that help accelerate the development of efficient models.
OTM DELIVERED : How Business Process Outsourcing and Preconfigured Solutions...
How to leverage BPO (Business Process Outsourcing) to reduce your OTM (Oracle Transportation Management) implementation costs and focus on your core competencies.
Presented by Samuel Levin at MavenWire.
Objective Determination Of Minimum Engine Mapping Requirements For Optimal SI...
The document discusses determining the minimum number of engine test points needed for optimal spark-ignition direct-injection engine calibration. Results found that approximately 100 spark sweeps were required to optimally calibrate the engine using a 2-stage modeling approach. A problem-solving approach was used that involved designing test matrices, developing 2-stage models, and comparing calibrations from reduced and exhaustive test designs.
Thematic_Mapping_Engine
The document describes the Thematic Mapping Engine (TME), an open source application that allows users to create thematic maps using Keyhole Markup Language (KML). TME takes statistical data, spatial features, and mapping parameters as input and generates KML/KMZ files that can be viewed in geobrowsers like Google Earth. It includes a web interface that allows non-programmers to create thematic maps through an interactive form, and an Application Programming Interface (API) that allows programmers to generate KML/KMZ files from code. The document discusses how TME was implemented and evaluates its capabilities for thematic mapping using open data and open source tools.
Internal combustion engine (ja304) chapter 4
This document discusses various criteria and comparisons of internal combustion engines, including:
1) Indicator power, brake power, friction power, thermal efficiency, specific fuel consumption, indicator mean effective pressure, torque, and volumetric efficiency are analyzed.
2) Graphs show relationships between torque and speed, brake power and indicated power vs speed, and mechanical efficiency vs speed and brake power.
3) Fuel consumption varies with engine speed, with laws enacted to require better vehicle fuel efficiency and decrease air pollution from depletion of fossil fuels.
Testing and performance of IC engine
This document summarizes the testing and performance of diesel and petrol engines. It describes the key components and operating principles of diesel and petrol engines. It then discusses various performance characteristics of internal combustion engines that are used to evaluate engine performance, such as brake thermal efficiency, indicated thermal efficiency, specific fuel consumption, mechanical efficiency, volumetric efficiency, air fuel ratio, and mean effective pressure. The performance of engines is tested by measuring fuel consumption, brake power, and specific power output using various types of dynamometers.
i c engines efficiencies
in this presentation , the different engine inefficiencies has been discussed including all sort of friction losses which affects the brake power of the engine. It includes volumetric efficiency, thermal efficiency, IMEP, BMEP, brake power etc.
How to calculate your Fuel Consumption (FC)
This document provides instructions for calculating a car's fuel consumption (FC) in liters per 100 km through either rough estimation or careful calculation methods. It also explains how to convert FC to other units like miles per gallon or km per liter. Tips are given for improving FC such as driving slower, avoiding excessive idling or air conditioning use, and taking routes with less traffic or better road conditions. Conversion formulas and examples are included to demonstrate the calculation process.
final project
The document describes a project report on the design of a common bending tool for two sheet metal components (left and right). It discusses the history of metal shaping tools and introduces press tools and their types like blanking, piercing, bending, etc. It also covers topics like strip layout, types of strip layout arrangements, factors that affect strip arrangement, die design parameters and calculations. The key objectives are to maximize material utilization, reduce production costs, and increase part output through an efficient strip layout and tool design.
Icengines testing
IC ENGINE TESTING
At a design and development stage an engineer would design an engine with certain aims in his mind. The aims may include the variables like indicated power, brake power,
brake specific fuel consumption, exhaust emissions, cooling of engine, maintenance free operation etc. The other task of the development engineer is to reduce the cost and
improve power output and reliability of an engine. In trying to achieve these goals he has
to try various design concepts. After the design the parts of the engine are manufactured for the dimensions and surface finish and may be with certain tolerances. In order verify the designed and developed engine one has to go for testing and performance evaluation of the engines.
Thus, in general, a development engineer will have to conduct a wide variety of engine
tests starting from simple fuel and air-flow measurements to taking of complicated
injector needle lift diagrams, swirl patterns and photographs of the burning process in
the combustion chamber. The nature and the type of the tests to be conducted depend
upon various factors, some of which are: the degree of development of the particular
design, the accuracy required, the funds available, the nature of the manufacturing
company, and its design strategy. In this chapter, only certain basic tests and
measurements will be considered.
After studying this unit, you should be able to
• understand the performance parameters in evaluation of IC engine
performance,
• calculate the speed of IC engine, fuel consumption, air consumption, etc.,
• evaluate the exhaust smoke and exhaust emission, and
• differentiate between the performance of SI engine and CI engines.
CONDENSERS & COOLING TOWERS
This document discusses different types of condensers and cooling towers used in power plants. It describes steam condensers, which condense steam using water as the cooling media. Surface condensers are also discussed, which use indirect contact between steam and cooling water through tubes. Jet condensers use direct contact between steam and cooling water. The document also covers different types of cooling towers, including natural draft towers which use density differences to circulate air, and mechanical draft towers which use fans to increase air flow and improve evaporation.
More Related Content
What's hot
TenYearsCPOptimizer
The document discusses the history and capabilities of CP Optimizer, a constraint programming engine developed by IBM for scheduling problems. It was first released in 2007 and is now on version 12.8. CP Optimizer is used for scheduling applications across various industries and is part of CPLEX Optimization Studio. The document outlines key features like simplified modeling, automatic search, and interfaces in multiple programming languages.
CPLEX 12.5.1 remote object - June 2013
This presentation discusses advances in CPLEX 12.5.1 with special attention to using the remote object facility for building advanced distributed memory optimization algorithms. Performance improvements in CPLEX 12.5.1 complete the presentation.
ITG whitepaper: Value Proposition for AIX on IBM Power Systems: Ownership Exp...
ITG whitepaper: Value Proposition for AIX on IBM Power Systems: Ownership Exp...IBM India Smarter Computing
This document discusses the value proposition of consolidating SAP workloads onto IBM POWER7-based systems compared to x86 server consolidation using VMware. It finds that for three companies analyzed, three-year IT costs were 14-46% lower when using POWER7, averaging 39% lower costs than x86 servers. It also finds that costs of downtime were 58-77% lower on POWER7, averaging 74% lower. These cost savings are achieved through the higher performance, workload management capabilities, availability features, and consolidation densities of POWER7-based systems for running complex, virtualized SAP workloads.Energen (Energy & Utilities,Oracle/SAP/Power,SUN)
Energen achieved $500,000 in annual savings by migrating its Oracle and SAP software from 20 Sun servers to 2 IBM System p5 570 servers. This reduced hardware costs through lower Oracle licensing fees and consolidation. It also improved performance, cutting batch run times from 24 hours to 2 hours, and improved support with IBM's local presence. The migration virtualized the SAP environment using logical partitions, allowing systems to efficiently share resources.
2013 OTM EU SIG: Integrating SAP with OTM Presentation
The document discusses integrating SAP with OTM. It provides background on SAP and OTM history, highlights key design considerations, and common challenges. The real challenge is to fully understand the end-to-end supply chain business process and requirements to define necessary system support. Clarifying business ownership of supply chain segments and addressing pressures on the IT landscape are also important.
VLSID_2015_DSE_HMP_v3
The document discusses the problem of heterogeneous multicore processor (HMP) composition and configuration selection. Emerging HMPs will contain diverse core types, memories and accelerators. This leads to a very large design space of possible HMP configurations. The goal is to explore this design space and select the optimal configuration for goals like performance maximization or energy efficiency maximization, subject to constraints like area. This is a challenging optimization problem due to the extremely large design space involving different core types and numbers. The paper proposes a cross-layer approach to tackle this problem.
Oracle Transportation Management Customer Case Study
Macsteel Service Centers USA is a leading metals processor and distributor with over 30 locations in North America. They implemented Oracle EBS R12 and Oracle Transportation Management (OTM) to standardize processes, replace legacy systems, and gain efficiencies. Some key benefits seen include better management of shipping costs and carrier rates/contracts. However, challenges included a steep learning curve for their user base and additional labor needs. Next steps include further automating processes and expanding the use of OTM and analytics capabilities.
Otm con8766 pdf_8766_0001
Unilever implemented Oracle Transportation Management (OTM) to standardize and optimize its North American inbound and outbound transportation processes. The multi-year project involved rolling out OTM to 29 plants, 29 distribution centers, 164 co-packers, and over 800 suppliers across the US and Canada. While the implementation faced some challenges around dock scheduling, carrier EDI connectivity, and rate data issues, the initial pilot helped address many of these. Current focus areas include improving system integration between OTM and SAP, setting up EDI for ocean shipments, and leveraging OTM's optimization capabilities.
Recent MIP Performance Improvements in IBM ILOG CPLEX Optimization Studio
This Virtual User Group session, held on 2014-01-22, presents some of the techniques and algorithms used to improve the CPLEX MIP solver in versions 12.5.1 and 12.6.
Mechanical Simulations for Electronic Products
As electronic devices become smaller and more ubiquitous, the printed circuit boards and components that drive them face increasing power densities and evermore complexity. To ensure product reliability and performance, accurate and detailed analysis methodologies are necessary.
Complex Logistics Use Cases - OTM Myths
Traditional TMS has not ventured into the world of more specialist logistics solutions such as Air, Rail networks and Postal services. However more and more we are seeing OTM being delivered in these industries across Europe . In the presentation we will demonstrate with use cases how OTM is being applied in these complex, previously off limits industries.
Accelerating the Development of Efficient CP Optimizer Models
The IBM Constraint Programming optimization system CP Optimizer was designed to provide automatic search and a simple modeling of discrete optimization problems, with a particular focus on scheduling applications. It is used in industry for solving operational planning and scheduling problems. We will give an overview of CP Optimizer and then describe in further detail a set of features such as input/output file format, warm-start or conflict refinement that help accelerate the development of efficient models.
OTM DELIVERED : How Business Process Outsourcing and Preconfigured Solutions...
How to leverage BPO (Business Process Outsourcing) to reduce your OTM (Oracle Transportation Management) implementation costs and focus on your core competencies.
Presented by Samuel Levin at MavenWire.
What's hot (13)
ITG whitepaper: Value Proposition for AIX on IBM Power Systems: Ownership Exp...
ITG whitepaper: Value Proposition for AIX on IBM Power Systems: Ownership Exp...
2013 OTM EU SIG: Integrating SAP with OTM Presentation
2013 OTM EU SIG: Integrating SAP with OTM Presentation
Oracle Transportation Management Customer Case Study
Oracle Transportation Management Customer Case Study
Recent MIP Performance Improvements in IBM ILOG CPLEX Optimization Studio
Recent MIP Performance Improvements in IBM ILOG CPLEX Optimization Studio
Accelerating the Development of Efficient CP Optimizer Models
Accelerating the Development of Efficient CP Optimizer Models
OTM DELIVERED : How Business Process Outsourcing and Preconfigured Solutions...
OTM DELIVERED : How Business Process Outsourcing and Preconfigured Solutions...
Viewers also liked
Objective Determination Of Minimum Engine Mapping Requirements For Optimal SI...
The document discusses determining the minimum number of engine test points needed for optimal spark-ignition direct-injection engine calibration. Results found that approximately 100 spark sweeps were required to optimally calibrate the engine using a 2-stage modeling approach. A problem-solving approach was used that involved designing test matrices, developing 2-stage models, and comparing calibrations from reduced and exhaustive test designs.
Thematic_Mapping_Engine
The document describes the Thematic Mapping Engine (TME), an open source application that allows users to create thematic maps using Keyhole Markup Language (KML). TME takes statistical data, spatial features, and mapping parameters as input and generates KML/KMZ files that can be viewed in geobrowsers like Google Earth. It includes a web interface that allows non-programmers to create thematic maps through an interactive form, and an Application Programming Interface (API) that allows programmers to generate KML/KMZ files from code. The document discusses how TME was implemented and evaluates its capabilities for thematic mapping using open data and open source tools.
Internal combustion engine (ja304) chapter 4
This document discusses various criteria and comparisons of internal combustion engines, including:
1) Indicator power, brake power, friction power, thermal efficiency, specific fuel consumption, indicator mean effective pressure, torque, and volumetric efficiency are analyzed.
2) Graphs show relationships between torque and speed, brake power and indicated power vs speed, and mechanical efficiency vs speed and brake power.
3) Fuel consumption varies with engine speed, with laws enacted to require better vehicle fuel efficiency and decrease air pollution from depletion of fossil fuels.
Testing and performance of IC engine
This document summarizes the testing and performance of diesel and petrol engines. It describes the key components and operating principles of diesel and petrol engines. It then discusses various performance characteristics of internal combustion engines that are used to evaluate engine performance, such as brake thermal efficiency, indicated thermal efficiency, specific fuel consumption, mechanical efficiency, volumetric efficiency, air fuel ratio, and mean effective pressure. The performance of engines is tested by measuring fuel consumption, brake power, and specific power output using various types of dynamometers.
i c engines efficiencies
in this presentation , the different engine inefficiencies has been discussed including all sort of friction losses which affects the brake power of the engine. It includes volumetric efficiency, thermal efficiency, IMEP, BMEP, brake power etc.
How to calculate your Fuel Consumption (FC)
This document provides instructions for calculating a car's fuel consumption (FC) in liters per 100 km through either rough estimation or careful calculation methods. It also explains how to convert FC to other units like miles per gallon or km per liter. Tips are given for improving FC such as driving slower, avoiding excessive idling or air conditioning use, and taking routes with less traffic or better road conditions. Conversion formulas and examples are included to demonstrate the calculation process.
final project
The document describes a project report on the design of a common bending tool for two sheet metal components (left and right). It discusses the history of metal shaping tools and introduces press tools and their types like blanking, piercing, bending, etc. It also covers topics like strip layout, types of strip layout arrangements, factors that affect strip arrangement, die design parameters and calculations. The key objectives are to maximize material utilization, reduce production costs, and increase part output through an efficient strip layout and tool design.
Icengines testing
IC ENGINE TESTING
At a design and development stage an engineer would design an engine with certain aims in his mind. The aims may include the variables like indicated power, brake power,
brake specific fuel consumption, exhaust emissions, cooling of engine, maintenance free operation etc. The other task of the development engineer is to reduce the cost and
improve power output and reliability of an engine. In trying to achieve these goals he has
to try various design concepts. After the design the parts of the engine are manufactured for the dimensions and surface finish and may be with certain tolerances. In order verify the designed and developed engine one has to go for testing and performance evaluation of the engines.
Thus, in general, a development engineer will have to conduct a wide variety of engine
tests starting from simple fuel and air-flow measurements to taking of complicated
injector needle lift diagrams, swirl patterns and photographs of the burning process in
the combustion chamber. The nature and the type of the tests to be conducted depend
upon various factors, some of which are: the degree of development of the particular
design, the accuracy required, the funds available, the nature of the manufacturing
company, and its design strategy. In this chapter, only certain basic tests and
measurements will be considered.
After studying this unit, you should be able to
• understand the performance parameters in evaluation of IC engine
performance,
• calculate the speed of IC engine, fuel consumption, air consumption, etc.,
• evaluate the exhaust smoke and exhaust emission, and
• differentiate between the performance of SI engine and CI engines.
CONDENSERS & COOLING TOWERS
This document discusses different types of condensers and cooling towers used in power plants. It describes steam condensers, which condense steam using water as the cooling media. Surface condensers are also discussed, which use indirect contact between steam and cooling water through tubes. Jet condensers use direct contact between steam and cooling water. The document also covers different types of cooling towers, including natural draft towers which use density differences to circulate air, and mechanical draft towers which use fans to increase air flow and improve evaporation.
Gearless drive report 2014 lst
This document describes the fabrication of a gearless drive. It was submitted by 6 students for their diploma in mechanical engineering. It discusses the planning, design, material selection, fabrication, and assembly of the gearless drive mechanism. The drive transmits power from a motor to a grinding stone through four L-shaped rods without using gears.
Automatic manual transmission
An automated manual transmission (AMT) uses electronic sensors, pneumatics, processors and actuators to execute gear shifts automatically based on driver input or a computer, removing the need for a clutch pedal. An AMT has a clutch but no clutch pedal, and operates like a manual transmission by engaging and disengaging the clutch and gears. It allows drivers to switch between automatic and manual transmission modes. AMTs are more fuel efficient than traditional automatic transmissions, cheaper than an automatic, and prevent stalling in traffic, but are slightly less smooth than an automatic transmission. Car manufacturers are expected to increasingly offer AMT as an alternative to manual and automatic transmissions in India.
James watt and the steam engine
The document provides information about early steam engines and James Watt, who improved the efficiency of the steam engine. It mentions that Watt was born in 1736 in Scotland and worked as an instrument maker before becoming interested in steam engines. Watt introduced improvements like the separate condenser that made steam engines more powerful and efficient. The unit of power known as the watt is named after James Watt.
JA304 chapter 1
The document provides information on different types of internal combustion engines. It describes two-stroke and four-stroke engines, whether spark ignition or compression ignition. For both two-stroke and four-stroke engines, it explains the basic workings of each stroke in the combustion cycle, including intake, compression, power/expansion, and exhaust strokes. Diagrams and animations are included to illustrate the piston movement and valve timing in two-stroke and four-stroke engines.
An Overview of Vehicle Control Systems
The document provides an overview of various vehicle control systems, including antilock braking systems (ABS), traction control systems (TCS), electronic stability programs (ESP), active suspensions, all-wheel drive (AWD), drive-by-wire technologies, active noise and vibration control, cruise control, adaptive cruise control, stop-and-go functions, collision avoidance assists, overtaking warnings, and lane departure warnings. It describes the components and operation of these systems, which use sensors, electronic control units, actuators and other technologies to improve vehicle stability, handling, safety and driver assistance.
Performance parameters
The document discusses engine geometry and piston motion. It defines key terms like cylinder clearance volume, swept volume, compression ratio, and average and instantaneous piston speeds. It then covers topics like engine torque, power, indicated work, mechanical efficiency, power and torque curves, fuel consumption, combustion efficiency, and volumetric efficiency. Key parameters discussed include mean effective pressure, specific fuel consumption, thermal efficiency, and air-fuel ratio.
INTERNAL COMBUSTION ENGINE PERFORMANCE PARAMETERS
The document discusses key performance parameters of engines including thermal efficiencies, power outputs, specific fuel consumption, air-fuel ratios, and volumetric efficiency. It defines indicated thermal efficiency as the ratio of indicated power to fuel energy, and brake thermal efficiency as the ratio of brake power to fuel energy. Mechanical efficiency is the ratio of brake power to indicated power. Volumetric efficiency is the ratio of actual to theoretical air intake. Mean effective pressures and specific power input are also discussed.
AUTOMATED MANUAL TRANSMISSION
Transmission is a part of the car which connects the engine to the wheels. When car speeds up, the engine can not speed up in the same proportion, so there are gears involved which match the engine speed to the wheel speed so that we can drive faster or slower than the engine speed.
Ppt automobile
The document discusses various types of vehicle transmissions including manual, automated manual, automatic, continuously variable, and dual clutch systems. It covers key transmission components like the clutch, gearbox, driveshaft, universal joints, differential, and axle. The stages of the transmission design process are outlined including project setup, concept design, detailed design, drawings and tolerancing. Specific transmission systems like planetary gearsets and torque converters used in automatic transmissions are described in detail. Requirements, working principles, advantages and trends for different transmission types are also summarized.
Gearless transmission system
This document describes the development of a working model of a gearless transmission. It discusses the need for gearless transmission to increase efficiency. The working principle involves using bent links to transmit power between shafts at 90 degrees without using gears. Construction details and materials used are provided. Advantages include lower cost and ability to transmit power at any angle, while limitations include lower torque capacity and fixed speed ratio. Possible future applications are in automation and robotics.
Condenser in thermal power plants
The document discusses condensers used in thermal power plants. It describes the functions of a condenser as condensing exhaust steam from turbines to be reused in the steam cycle, creating a vacuum to improve turbine efficiency, and removing non-condensable gases. Key aspects covered include the condenser's role in the Rankine cycle, operation, materials used for tubes, sources of air leakage, methods for detecting water leakage into tubes, and cleaning and testing of condenser tubes.
Viewers also liked (20)
Objective Determination Of Minimum Engine Mapping Requirements For Optimal SI...
Objective Determination Of Minimum Engine Mapping Requirements For Optimal SI...
Similar to Engine Mapping And Calibration USA
Diesel Engine Testing
MAHLE Powertrain has 29 test cells in Michigan equipped to support diesel engine testing up to 19L in size. They offer specialized testing like friction analysis, oil consumption testing, and slobber assessment. They can support a wide range of engine development projects from performance testing to durability. They also offer calibration support through their alliance with CAV Engineering.
Vehicle Instrumentation
MAHLE Powertrain provides vehicle instrumentation services and facilities for automotive testing groups. They offer experience in a variety of instrumentation projects from simple to complex. Their data collection hardware and analysis software help engineers rapidly identify issues. Their facilities include vehicle hoists, secure engine build rooms, and machining/fabrication capabilities to support countless instrumentation options.
Race Engine Design And Support
MAHLE Powertrain has expertise in modifying street car engines for race use. They utilize their resources from developing production engines and MAHLE Group components to provide race-winning engines. Their engine design, build, and test facilities allow them to undertake engine development work. Their engineering staff also provides calibration and trackside support to ensure optimal engine performance.
Powertrain Design
MAHLE Powertrain has over 25 years of experience designing automotive engines, including designing engines from scratch and modifying existing engine designs. They have experience with high-performance and niche applications, which translates well to today's requirements for downsized engines. Their design experience is complemented by MAHLE's component manufacturing capabilities to provide optimized designs that meet cost and performance objectives. They have experience with a wide range of customers and products, from single cylinder diesel engines to high-performance race car engines.
Venkata Nagupalli _Resume
Venkata Krishna Teja is seeking a full-time position in transmission controls and calibration at FCA. He has over 3 years of experience as a transmission control calibration engineer at Chrysler, where he has led various calibration and testing projects. He has strong software skills including Chrysler diagnostic tools, MATLAB, and ANSYS. Teja holds an MS in Mechanical Engineering from Michigan Technological University and a BE in Mechanical Engineering from Osmania University, India.
Venkateswaran Varatharajan Work Experience
Venkateswaran Varatharajan has over 10 years of experience as a technical specialist engineer working on automotive software and system testing projects. He is currently a functional lead engineer at Bosch working on body control module testing using DSpace tools. Previously he held roles as a senior test engineer at Renault Nissan and Continental Automotive working with NI and Vector tools on instrument cluster, external lights, and wiper systems testing. He has expertise in requirements analysis, test automation, issue tracking, and working in accordance with ASPICE standards.
Enhanced Automation Framework delivers Business Outcomes
STAG evaluates a hybrid keyword-driven automation framework and enhances it for better outcomes to meet the current and future automation needs of one of the largest general insurers in the UK.
Autosar MCAL (Microcontroller Abstraction Layer)
AUTOSAR Migration would enable the Automotive Supplier to leverage following benefits of well-defined layered software architecture of AUTOSAR 4.0. Design and development of AUTOSAR MCAL components for migration to the new hardware platform
Venkata Nagupalli _Resume
Venkata Krishna Teja has over 3 years of experience in powertrain calibration and vehicle testing. He is currently a lead transmission control calibration engineer, where he is responsible for calibrating torque management and releasing transmission software. He has experience testing vehicles in various conditions and analyzing data to improve customer experience. Teja also has a master's degree in mechanical engineering and is proficient in several vehicle simulation and calibration software tools.
Fixture.Tech Presentation (english)
This document describes a company that manufactures precision fixtures for automotive components. They offer world-class quality at lower costs than other suppliers, with over 25 years of experience working with automotive OEMs. Their experienced team can produce fixtures to customer drawings or duplicate existing fixtures. They promise fixtures that are 20% cheaper and delivered 20% faster than competitors while maintaining quality standards.
DamonLacovicresume122016noADDNew
This document provides a summary of an engineering professional's experience including 20 years in vehicle systems and electrical design engineering. Key skills include electrical design, test equipment development, interdisciplinary technical abilities, and business knowledge. Specialized expertise is demonstrated in various communication protocols, sensors, and design/documentation. Professional experience highlights leadership roles managing integration and testing of automotive systems at major automotive suppliers.
Rekha Puppala_SAP
- Rekha Puppala has over 5 years of experience as an SAP CRM Consultant, testing SAP CRM, SAP MM, and other SAP modules. She has expertise in functional, framework, UI, and regression testing.
- She has worked on various projects for clients like Boots UK, Centrica, Johnson & Johnson, and Cummins, testing applications like SAP CRM, Siebel, and other SAP modules.
- Her responsibilities include test case preparation, execution, and defect reporting using tools like HPQC and ClearQuest. She is proficient in various testing techniques and automation.
Sudip Chanda Presentation
Sudip Chanda is applying for the position of Senior Technician at an automotive company in Kolkata. He has over 8 years of experience working with various automobile companies servicing Volvo and Mercedes-Benz vehicles. His skills include diagnosing and repairing engines, transmissions, brakes and other systems. He aims to provide excellent customer service and ensures repairs are completed to a high standard and on budget.
Kollmorgen servo systems_2011_catalog
The document is a catalog from Kollmorgen that describes their line of servo drives, motors, and motion control products. It includes:
- The AKD series of Ethernet-based servo drives that provide high performance and integrate easily into applications. They work seamlessly with Kollmorgen motors.
- A range of scalable programming options for the AKD drives from basic torque/velocity control to multi-axis synchronization with the Automation Suite.
- Other Kollmorgen products like linear motors, gearheads, and servomotors that pair well with the AKD drives for optimized motion control solutions.
Agilis_CorporateBrochure
Agilis provides engineering services to optimize gas turbine engine performance. They work as an extension of client engineering teams using the latest design software. Agilis has over 20 years of experience helping clients develop lighter, more efficient and reliable turbo-machinery. Their services include mechanical design, structural analysis, aerodynamics, and program management. Agilis also provides vibration analysis software called c360 that monitors blade health and efficiency in real-time.
8 reasons why your business should migrate from on premise servers to the cloud
One of our client’s platform was on-premise. They mainly struggled with the maintenance difficulties & lack of scalability of the #infrastructure supporting their operations.
Accommodating the #growth progression of the #business was becoming difficult due to the limitations of the on-premise system.
MarutiTechlabs #DevOps consultants & technical architects were roped in for an end to end #analysis, & subsequent on-premise to cloud migration.
Early load testing & auto-scaling cloud infrastructure helped them to handle peak loads with zero issues, & hasn’t experienced a single outage since migrating to the cloud.
Let us have a look at a detailed #casestudy on On Premise to AWS Cloud Migration.
#cloud #aws
National Windscreens ADAS Report
The mainstream adoption of ADAS (Advanced DriverAssistance Systems) technology is having a dramatic
impact on how windscreens are fixed and replaced. ADAS
are developed to automate, adapt, and enhance vehicle
technology for improved safety and driving. Each leap
forward is creating a safer environment on the road, with
motorists receiving a growing list of active safety support
features.
According to the ADAS scale devised by Society of
Automotive Engineers (SAE), the market is approximately
3/5th of the way to full autonomy. The shift towards
autonomous driving is changing the way that repairs are
conducted. This article aims to explore the current, and
future, influence of ADAS technology across the automotive
industry, and the resulting implications for drivers, fitters,
and insurers.
Aniruddha_More_Resume
Aniruddha More is a software engineer with over 6 years of experience in embedded software development including requirements, design, testing and maintenance. He has skills in C, Assembly, protocols like CAN and Modbus, and microcontrollers like TI and ARM. He held positions at KPIT and Delta Embedded where he developed firmware for projects like hybrid vehicles and HVAC systems. He has a diploma in embedded systems and bachelor's degree in electronics and telecommunications.
Engine Assembly
MAHLE Powertrain has provided low volume engine assembly for over 20 years to major automakers. They support niche performance and end-of-life engine builds, as well as subassembly logistics. Their capacity allows customers to focus on high volume production. MAHLE uses a combination of manual and automated processes tailored to product volume and complexity, with quality control processes to ensure any issues are addressed. They have experience supporting customers from concept to manufacture across engine assembly programs.
Introduction to Automated Electrical Testing
VMC provides automated electrical testing solutions for vehicles and components. Their systems can test continuity, voltage, current, and communication protocols. Tests are completed much faster by their automated systems compared to manual methods. The automated tests also provide detailed digital records and test statistics for quality control. VMC's hardware and software are customizable to perform specific required tests through flexible relay matrices and programmable test sequencing.
Similar to Engine Mapping And Calibration USA (20)
Enhanced Automation Framework delivers Business Outcomes
Enhanced Automation Framework delivers Business Outcomes
8 reasons why your business should migrate from on premise servers to the cloud
8 reasons why your business should migrate from on premise servers to the cloud
More from Brian Trimboli
Piston Telemetry
MAHLE Powertrain has extensive experience instrumenting engine components and capturing measurements during testing to validate engine models. Their telemetry systems can measure temperatures, pressures, strains and displacements in real-time, up to 10,000 RPM, to provide a fundamental understanding of internal engine phenomena. Customers benefit from rapid testing and analysis to support research and development.
Oil Consumption Testing
MAHLE has developed three advanced systems for measuring engine oil consumption: the Radiometric system, Sulfur Trace system, and Mass Spectrometer system. These systems utilize tracer elements in the oil or directly detect oil molecules to accurately measure oil consumption. The Radiometric system uses tritium as a tracer and has excellent repeatability. The Sulfur Trace system detects sulfur dioxide in real time. The Mass Spectrometer system does not require a tracer and can make cylinder-selective measurements with high dynamic response. Accurate oil consumption measurement is important for optimizing engines to meet emissions and fuel efficiency goals.
Downsizing Demo Vehicle
Gasoline engine downsizing uses smaller engines with high boost turbocharging to improve fuel economy while maintaining power. MAHLE Powertrain developed a 1.2L 3-cylinder demonstrator engine using a single turbocharger and direct gasoline injection to achieve fuel economy gains over a 2.0L engine while producing 120kW of power. Testing of the engine showed fuel consumption improvements in both city and highway driving compared to the larger engine. The project collaboration between MAHLE, Bosch, and Bosch MAHLE Turbo Systems demonstrated an understanding of advanced downsizing technologies.
Engine Test USA
MAHLE Powertrain has extensive experience providing engine and vehicle calibrations for all fuel types, from diesel to gaseous, including for high performance race engines. Their facilities and software tools ensure project success even with compressed development timelines. They have capabilities in engine mapping, on-board diagnostics, vehicle emissions and fuel economy testing, driveability, and can provide calibration engineers to support customers.
MAHLE Data Recorder 2 (MDR2)
The MAHLE Data Recorder 2 is a ruggedized Windows PC designed to autonomously collect high-rate powertrain ECU data. It features a large storage capacity, multiple I/O options, low power consumption, and can be remotely accessed. The MDR2 is a solution for autonomous data logging, in-vehicle calibration, and remote vehicle access.
MAHLE's Intelligent Power Controller MIPC
The MAHLE Intelligent Power Controller is a retrofit device that can be used with ETAS ES710 or ES715 Drive Recorders to mitigate boot up delay and ensure reliable engine starts. It features CAN transceiver wake up from CAN bus activity or specific messages, wake up from trigger voltage or predefined time periods, and continuous battery monitoring to protect the vehicle battery from excessive charge depletion. The device provides power outputs for the Drive Recorder and Interface Module and can be configured through a Windows application.
Pro Logiq® IDAA
ProLogiq IDAA is software designed for powertrain control system development. It can process vast amounts of data from tests and generate graphical summaries to identify trends and anomalies. The software automatically analyzes data and presents it in trend plots, allowing engineers to quickly see potential issues. It maximizes the return on expensive test vehicles by facilitating in-depth data analysis.
Single Cylinder Research Engine
The MAHLE Powertrain single cylinder optical access research engine was developed to further understanding of in-cylinder processes like air motion, fuel spray behavior, and mixture formation with new combustion and fuel injection concepts. It allows for detailed analysis of the combustion process through high-speed imaging and optical techniques like PIV and LDA. Current projects are gathering data for thermodynamic analysis and investigating alternative fuels and variable valve actuation systems' effects on efficiency and emissions.
Engine Friction Measurements
Engine friction reduction improves fuel economy, durability, and performance. Accurately measuring friction at the system and component level allows for targeted engineering analysis and optimization of friction-reducing technologies. Measurements establish the true benefits of technologies in a given application. Intelligent test designs and customer input can quickly evaluate optimum combinations of several technologies.
Downsizing Demonstrator Engine
MAHLE has developed an advanced downsized demonstrator engine to investigate how aggressively downsizing can maximize fuel economy benefits. The 1.2L 3-cylinder engine uses a range of technologies including twin sequential turbos, direct injection, advanced valve train, and lightweight materials. Initial simulations show the demonstrator engine could achieve a 29.4 mpg US city/37.7 mpg US highway fuel economy compared to a 2.0L engine's 23.9/31.7 mpg, demonstrating that downsizing can significantly reduce fuel consumption and emissions in a production feasible package.
Controls Engineering
This document summarizes MAHLE Powertrain's capabilities in controls engineering. It discusses their experience developing control systems across various vehicle types and powertrains. It also lists their technical expertise, which includes system engineering, hardware development, quality assurance, and calibration. MAHLE Powertrain offers integrated on-site support or remote support to assist with controls development and validation.
More from Brian Trimboli (11)
Recently uploaded
EV Charging at MFH Properties by Whitaker Jamieson
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(napier毕业证书)英国龙比亚大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(Columbia文凭证书)哥伦比亚大学毕业证如何办理
一模一样【微信：176555708】【(Columbia文凭证书)哥伦比亚大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
EV Charging at Multifamily Properties by Kevin Donnelly
Kevin Donnelly gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一模一样【微信：176555708】【(WashU文凭证书)圣路易斯华盛顿大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Catalytic Converter theft prevention - NYC.pptx
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
AadiShakti Projects ( Asp Cranes ) Raipur
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
学校原件一模一样【微信：741003700 】《(Exeter毕业证书)埃克塞特大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Here's Why Every Semi-Truck Should Have ELDs
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What do the symbols on vehicle dashboard mean?
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Recently uploaded (17)
EV Charging at MFH Properties by Whitaker Jamieson
EV Charging at MFH Properties by Whitaker Jamieson
EV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at Multifamily Properties by Kevin Donnelly
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing.pptx
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
Globalfleet - global fleet survey 2021 full results
Globalfleet - global fleet survey 2021 full results
Engine Mapping And Calibration USA
- 1. Engine Mapping and Calibration MAHLE Powertrain has extensive experience in providing engine Contact Information and vehicle calibrations to the mainstream automotive production MAHLE Powertrain, LLC environment, with all fuel types – from diesel to gaseous. Our Novi, MI 48375 experience is not limited to the mainstream but encompasses powertrain@us.mahle.com everything from high performance race engines and high specific (248) 473-6600 output turbo gasoline direct injection powertrains to hydrogen powered buses and high altitude aerospace engines. Our in-house facilities and proprietary software tools ensure project success even with the highly compressed development time requirements of today’s business environment. MAHLE Product Information 06/2009 1 ©MAHLE Powertrain LLC, 2009
- 2. Engine Mapping and Calibration Engine Mapping On-Board Diagnostics MAHLE Powertrain has extensive experience in engine Diagnostics are an increasingly complicated engineering mapping, particularly with high degree of freedom engine task for both established and emerging market segments. systems. DoE techniques are applied in conjunction with MAHLE Powertrain uses DoE and modeling techniques advanced engine response modeling to quickly optimize extensively to design, implement and optimize OBD even the most complex engine system. Automated monitors in compressed time scales. dynamometer test procedures further reduce test time. Validation MAHLE Powertrain’s proprietary MDR2 data recorder and PROLOGIQ® IDAA software toolset allows rapid evaluation of calibration and OBD robustness under real world driving conditions. Data Collection Services - Automate Repetitive Processing Vehicle Emissions & Fuel Economy test acquire store calculate store report Our in-house AWD vehicle chassis test facility is EPA/CARB certified to SULEV emissions levels. Recent improvements ensure that we have the highest level of capability for accurate fuel economy measurements. Calibration Engineers Our pool of available calibration engineers (for in-house and customer on-site locations) provides a wealth of experience in specialized functions and general vehicle calibrations. Our engineers can contribute to the team immediately with little to no ramp-up time. Diesel Capabilities – CAV Engineering Our alliance with CAV Engineering provides us with the capability to offer experienced diesel engine calibration support to our customers. Driveability MAHLE Powertrain can deliver engine and transmission calibrations that capture the customer's requirements and the vehicle's 'DNA'. Calibrations are developed initially on a transient dynamometer, and then in-vehicle on chassis dynamometers and on the road. Final testing and validation is performed in territories representative of the intended markets. MAHLE Product Information 06/2009 2 ©MAHLE Powertrain LLC, 2009