SMAC electric actuators are not limited to just air cylinder replacement. With controllable force, velocity, and position, along with SMAC's unique Soft-Land™ Technology these actuators can be used to solve your most challenging packaging process needs and deliver the feedback needed for validating processes. Combine these features with airless operation and they are perfectly suited for pharmaceutical and clean room applications.
4. What is a Moving Coil Actuator?
• DC Linear Servo motor based actuators and accompanying
controllers covered with over 30 issued patents with another 10 in
process.
5. Hydraulic
High force
Pneumatic
Middle - High force
Electric
Low force = Precision force
What is a Moving Coil Actuator?
• Programmable actuators that can do what hands and fingers do.
• Precise work with the ability to verify in real time that the work
was done correctly.
6. What is a Moving Coil Actuator?
F ∝ N I B
• The essential principle is the same as you will find in any
permanent magnet loudspeaker. The voice coil sits in a
strong magnetic field, and by passing a current through
the coil a force is generated in either direction. With
SMAC actuators, the moving coil makes an ideal linear
motor.
• The amount of force generated is governed by the
equation.
• F = the force generated
• N = the number of turns in the winding
• I = the current flowing through the winding
• B = the magnetic flux
7. SMAC Advantages
• Ability to Soft-Land - not damage the
object - and push with a programmed
force and or velocity.
• Ability to cycle at very high rates.
• Ability to repeat move to move within 1
millisecond.
• Ability to cycle 100M times.
• Ability to programmable change
stroke/speed/force.
8. What is Soft-Land?
Unique to SMAC (patented)
Actuator to approach a surface at an unknown
distance and land on it with a programmed
force.
Contact force as low as 10 grams
Detect objects/obstructions
Useful for handling delicate or high value
components
Used in:
Pick and place of delicate objects
Gauging of fragile or pliant materials
Switch / materials testing
Container ejecting / sorting / diverting
Many, many others
9.
10.
11.
12.
13. About SMAC
• Founded in 1990 in Carlsbad, California,
USA with the target of developing
devices that would automate work
done by hands and fingers.
• By combining this capability with
competitive prices SMAC believes it can
eventually replace older technologies
such as pneumatic and ball screw
actuators.
• SMAC now manufactures a wide range
of precision programmable electric
actuators based on its patented moving
coil technology.
14. About SMAC
• These proprietary moving coil linear motor based designs are technically far
ahead of old generation pneumatic and other electric actuators, including
moving magnet linear motors.
• Our technological edge, combined with continuous cost-down/
quality-up process and its worldwide sales basis makes SMAC a leading
mechatronics manufacturer in the world today.
• SMAC Actuators have the ability to perform tasks and verify its quality at the
same time. This makes them “Mechatronic Actuators”.
15. The future of Mechatronics is bright.
SMAC Moving Coil Actuators are leading the way!
• SMAC Moving Coil Actuators are
True Mechatronic devices based
on SMACs proprietary Moving
Coil linear servo motor.
• At this time there are no other
companies making products that
can match the MCA capabilities.
16. Thank you.
SMAC Moving Coil Actuators
5807 Van Allen Way
Carlsbad, Ca
USA
Phone: 760-929-7575
Email: info@smac-mca.com
www.smac-mca.com