Eagle Bulk® Material HD Hose - Heavy-Duty Bulk Transfer Hose - Material Handling hose
•
0 likes•33 views
Heavy-Duty Bulk Transfer Hose - Material Handling hose. Material handling hose used for the pneumatic transport of abrasive materials such as cement, sand and other dry abrasive bulk materials. Its anti-static tube liner compound makes this hose a great choice for the anti-static transfer of materials that create static buildup. 4" ID
Report
Share
Report
Share
Download to read offline
Recommended
Vacuum bag molding
Vacuum bag molding is an open mold technique used for thermoset composites involving hand layup and vacuum bagging. Vacuum bagging uses a vacuum bag to apply even pressure over composite materials to consolidate them. It involves placing release fabrics, breather materials, and vacuum bags over molds with resin-coated components. Applying vacuum pressure draws air out and uses atmospheric pressure to hold components in place until the resin cures.
Nonlinear FEA analysis Rubber gasket
This document summarizes the nonlinear finite element analysis of a silicone rubber gasket conducted using Solidworks Simulation 2015. The analysis used nonlinear material properties and geometric nonlinearity to model the incompressible and bulging behavior of rubber under compression. The model was meshed and subjected to a 0.035 inch displacement in the -Z direction. The results showed a maximum displacement including sliding and buckling, and a maximum stress of 234 psi, which is below the material strength of 700-800 psi. Revision A changed the material to a 70 durometer silicone rubber.
06.presentation on coating methods
The document summarizes several coating methods used in manufacturing coated products, including gravure coating, comma coating, reverse roll coating, hot melt coating, metering rod/Meyer bar coating, knife over roll coating, slot orifice coating, immersion/dip coating, and curtain coating. It provides details on some key methods, such as how gravure coating uses an engraved roller to apply coating from a bath, and how Meyer bar coating uses a wire-wound rod to meter the desired amount of coating applied by a bath roller.
Automotive CV joint rubber boot stress analysis
The document describes a nonlinear finite element analysis of an automotive CV joint rubber boot. The analysis used Solidworks Simulation 2017 to model the rubber material's incompressible behavior and applied torsion and tension loads. The 150,000 degree of freedom mesh predicted a maximum stress of 5,500 psi and deformation of 0.095 inch, exceeding the material's 3,000 psi tensile strength and indicating local tearing failure.
Prepreg
Prepreg is reinforcing fabric pre-impregnated with epoxy resin and curing agent. It requires heat and pressure to cure the laminate. Prepregs offer advantages like maximum strength, uniform thickness, less mess and waste, and shorter curing times compared to hand-layup. However, prepregs cost more and have a limited shelf life requiring storage at cooler temperatures. Proper curing requires a heat source like an oven to reach 270F and sustain it for 4 hours under vacuum bagging.
Creating material flow highways in Forging Dies
This document summarizes research into optimizing material flow in forging dies. Experiments were conducted using dies with "speed breakers" or bumps inside impressions to channelize material flow. Deeper extrusion depths were achieved compared to plain dies without locks. Groove depths were reduced to avoid folds. Differential surface finishes and localized lubrication can further control material flow. Simulation tools can optimize flow and add localized lubrication features to design the most efficient forging processes.
Resin Transfer Molding
My presentation on resin transfer molding. Not much description included. For reference i would recommend
" Composite manufacturing by Sanjay Mazumdar".
Abrasive and impact-abrasive wear testing of steels for mining, transporting,...
Presentation given at Hard rock tribology seminar 4-5.11.2014 at Tampere University of Technology, Finland
Information about the equiopment can be found at http://www.tut.fi/twc/en
Articles including measurement data can be found at https://www.researchgate.net/profile/Vilma_Ratia
Recommended
Vacuum bag molding
Vacuum bag molding is an open mold technique used for thermoset composites involving hand layup and vacuum bagging. Vacuum bagging uses a vacuum bag to apply even pressure over composite materials to consolidate them. It involves placing release fabrics, breather materials, and vacuum bags over molds with resin-coated components. Applying vacuum pressure draws air out and uses atmospheric pressure to hold components in place until the resin cures.
Nonlinear FEA analysis Rubber gasket
This document summarizes the nonlinear finite element analysis of a silicone rubber gasket conducted using Solidworks Simulation 2015. The analysis used nonlinear material properties and geometric nonlinearity to model the incompressible and bulging behavior of rubber under compression. The model was meshed and subjected to a 0.035 inch displacement in the -Z direction. The results showed a maximum displacement including sliding and buckling, and a maximum stress of 234 psi, which is below the material strength of 700-800 psi. Revision A changed the material to a 70 durometer silicone rubber.
06.presentation on coating methods
The document summarizes several coating methods used in manufacturing coated products, including gravure coating, comma coating, reverse roll coating, hot melt coating, metering rod/Meyer bar coating, knife over roll coating, slot orifice coating, immersion/dip coating, and curtain coating. It provides details on some key methods, such as how gravure coating uses an engraved roller to apply coating from a bath, and how Meyer bar coating uses a wire-wound rod to meter the desired amount of coating applied by a bath roller.
Automotive CV joint rubber boot stress analysis
The document describes a nonlinear finite element analysis of an automotive CV joint rubber boot. The analysis used Solidworks Simulation 2017 to model the rubber material's incompressible behavior and applied torsion and tension loads. The 150,000 degree of freedom mesh predicted a maximum stress of 5,500 psi and deformation of 0.095 inch, exceeding the material's 3,000 psi tensile strength and indicating local tearing failure.
Prepreg
Prepreg is reinforcing fabric pre-impregnated with epoxy resin and curing agent. It requires heat and pressure to cure the laminate. Prepregs offer advantages like maximum strength, uniform thickness, less mess and waste, and shorter curing times compared to hand-layup. However, prepregs cost more and have a limited shelf life requiring storage at cooler temperatures. Proper curing requires a heat source like an oven to reach 270F and sustain it for 4 hours under vacuum bagging.
Creating material flow highways in Forging Dies
This document summarizes research into optimizing material flow in forging dies. Experiments were conducted using dies with "speed breakers" or bumps inside impressions to channelize material flow. Deeper extrusion depths were achieved compared to plain dies without locks. Groove depths were reduced to avoid folds. Differential surface finishes and localized lubrication can further control material flow. Simulation tools can optimize flow and add localized lubrication features to design the most efficient forging processes.
Resin Transfer Molding
My presentation on resin transfer molding. Not much description included. For reference i would recommend
" Composite manufacturing by Sanjay Mazumdar".
Abrasive and impact-abrasive wear testing of steels for mining, transporting,...
Presentation given at Hard rock tribology seminar 4-5.11.2014 at Tampere University of Technology, Finland
Information about the equiopment can be found at http://www.tut.fi/twc/en
Articles including measurement data can be found at https://www.researchgate.net/profile/Vilma_Ratia
prepreg and Resin transfer molding
The document discusses prepreg and resin transfer molding processes for manufacturing textile composites. Prepregs are fibers pre-impregnated with resin that are used to make composites. The processing involves aligning fibers, adding resin-coated backing sheets, and compacting layers. Resin transfer molding injects resin into a closed mold containing fibers to produce near-net shape parts. The process involves pumping resin and catalyst, mixing, injecting the mixture into the mold containing fibers, and curing the part. Both processes produce composites with low void content and control over fiber content and thickness.
High speed slurry-pot type erosion wear tester
The document describes the development of a new high-speed pin mill slurry-pot tester that enables testing materials at speeds up to 20 m/s using large abrasive particles up to 10 mm in size. Previous testers had lower speeds under 10 m/s and used smaller particles under 1 mm. The new pin mill configuration allows for testing of different materials, profiles, and abrasives. Initial tests showed large variability that was addressed through a sample rotation method, reducing standard deviation to under 1%. Tests on wear-resistant rubbers correlated with real-world applications.
Application oriented wear testing of wear resistant steels in mining industry...
Application oriented wear testing aims to simulate real industrial wear processes in the laboratory. Laboratory tests that use similar particle sizes, speeds, and abrasives as actual mining applications provide wear results that better correlate with field tests compared to conventional abrasion tests. The mechanical behavior of wear resistant steels differs in low-stress versus high-stress abrasive conditions, and hardness alone does not determine wear performance. Ductile to brittle transitions can occur on wear surfaces during high-stress abrasion. Application oriented testing is valuable for simulating demanding conditions and improving correlation between laboratory and industrial wear performance.
Laboratory Study on using Waste Glass as Filler in Bituminous Mixes
The document summarizes a study on using waste glass as a filler in bituminous concrete mixes. Bituminous concrete mixes were prepared using three different fillers - cement, lime, and glass powder - at dosages of 4%, 6%, and 8%. Mixes with glass powder displayed similar Marshall and volumetric properties as mixes with conventional fillers. The optimum dosage of glass powder was determined to be 6.2%, at which mixes had higher stability, lower flow values, and density compared to normal mixes. Using glass powder waste as a filler can produce more stable and durable bituminous mixes while providing an environmentally-friendly way to dispose of glass waste from industries.
Learn about the Pultrusion Process Work
Pultrusion is a continuous molding process. It gives a sustainable and long-lasting product. Here present the information about the Pultrusion Process Work. Please visit here.
I cycle
This document describes procedures for determining the Los Angeles abrasion value of aggregates. The test involves placing aggregate samples and steel balls into a rotating steel cylinder. The rotation causes the balls to abrade the aggregate particles. The percentage weight loss of the aggregates after a specified number of rotations is the Los Angeles abrasion value, which indicates the resistance of the aggregates to wear. The test is important because aggregates used in road surfaces need to withstand abrasion from vehicle traffic. The document provides details on the required apparatus, test samples, and step-by-step procedure.
Powder Metallurgy
Powder metallurgy is competitive with other metal forming processes like casting, forging, and machining. It is commonly used to produce parts from metals with high melting points or that are difficult to machine. The basic steps of powder metallurgy are powder production, blending and mixing, powder consolidation through pressing or molding, sintering to strengthen bonds, and optional finishing. Near 70% of powder metallurgy production is for automotive applications due to its ability to produce parts with good dimensional accuracy and control porosity.
2386 1
This document outlines test methods for assessing the particle size and shape of aggregates used in concrete from an Indian Standard published in 1963. It includes procedures for sieve analysis to determine particle size distribution, and tests for materials finer than 75 microns, flakiness index, elongation index, and angularity number. The goal is to assist in evaluating the quality of aggregates used in concrete construction in India by testing relevant properties. Maximum sample weights and sieve sizes are provided for different tests.
Designing silicone molded components for success
The document provides information on designing silicone components for manufacturability. It discusses key rules for success, including understanding capabilities and customer requirements. It also covers material selection and properties, mixing and milling processes, colorants, tolerances, inspections, flash extension allowances, and tooling considerations. The overall message is that designing with manufacturability in mind from the beginning enhances the likelihood of project success.
Company profile SAV Chemicals pvt. ltd.
We are Joint venture with Taiwan based Cartell Chemicals. With technology support from Taiwan, SAV Chemical aims to provide a total Instant Adhesive Solution to Indian market for both consumer and Industrial segments. To supply the increasing demand of instant adhesives in India, SAV Chemicals offers a range of different grades and packaging. It is a solution for a product range from low viscosity to high viscosity for applications like rubber, metal, acrylic, wood, flex and so on. With the international quality and packing standards, SAV Chemicals MXBON branded products have the USPS' of Reusable, Quick and Strong Bonding, Higher Shelf Life and Competitive Prices. We are increasing our footprints to pan India and currently started work in major cities in India.
Test On Bitumen
The document discusses various tests conducted on bitumen, including penetration tests to determine hardness, ductility tests to measure adhesion and ability to stretch, viscosity tests to measure resistance to flow, softening point tests using a ring and ball to determine temperature susceptibility, and flash and fire point tests to identify ignition temperatures. In total, nine different tests are outlined that examine key properties of bitumen like hardness, adhesion, flow resistance, temperature performance, and ignition points.
Frequently Asked Questions about Rotational Moulding
Rotomoulding can be used to create thick-walled plastic products in a variety of sizes and materials. It is a versatile process that allows for complex shapes without seams or joints. While more expensive than blowmoulding for high volumes, rotomoulding is well-suited for low volume or customized parts due to relatively low setup costs. Proper design, material selection, and manufacturing techniques are keys to optimizing the strength and lifespan of rotomoulded products.
Shape tests of aggregate
Shape tests of aggregate for highway material construction. it includes Flakiness Index,Elongation Index and Angularity Number
Optimizing Powder Coating Usage
This document summarizes a project to optimize powder coating usage at a plant in Juarez, Mexico. The project aimed to reduce inconsistencies in paint thickness and consumption by upgrading from a manual to an automatic powder coating system. Key steps included integrating 12 automatic guns into the existing booth, setting recipes for high-volume parts, performing daily thickness checks, and collecting/analyzing the data. Results included a 20% reduction in average paint thickness, more consistent quality between shifts/operators, and reduced waste disposal. Lessons included reviewing available used equipment at other plants first and involving production employees in the process.
Rotational Moulding Conference Workshop - Question 1
Material specifications for rotomoulding powders are important because they provide information about properties that affect the molding process. These specifications include the melt flow index, dry flow rate, bulk density, and particle size distribution which influence how easily the powder will flow into all areas of the mold. Variations in these properties between batches of powder supplied can negatively impact the quality of molded parts by causing uneven wall thicknesses, gaps, and voids if not monitored. It is recommended to request and review certificates of analysis which specify these material properties for each batch received.
A Review Tribological analysis of Cast Iron by Advanced Coating
In our engineering system, friction, wear and tribology are not phenomena that most peoples are considering on daily basis. Wear tribological process occurs when two surfaces are in contact and both one are moving relative to each other. The cast iron is widely used in industrial sector. It have high rate of friction. To reduce the friction the various types of coating is analyzed as well as with lubrication the rate of wear decreases. Prof. Matin A. Shaikh | Prof. Ajij A. Shaikh | Prof. Mrs. G. V. Patil ""A Review: Tribological analysis of Cast Iron by Advanced Coating"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29871.pdf
Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/29871/a-review-tribological-analysis-of-cast-iron-by-advanced-coating/prof-matin-a-shaikh
DuraForm Flex Plastic - SLS Systems - Material properties (EN)
A durable, rubber-like material with good tear resistance and burst strength. Address broad applications requiring rubber-like flexibility and durability. For Gaskets, hoses and seals applications, etc.
Hot pressing
Hot pressing is a technique that combines powder compaction and sintering into a single step. Powder is placed in a graphite die and sintered under pressure and heat. This allows densification of materials that otherwise have poor sintering behavior. The process involves placing powder in a die and applying heat and pressure simultaneously. The temperature increases during compaction to allow sintering through mechanisms like plastic deformation and diffusion. Hot pressing produces fully dense materials in less time compared to conventional sintering. It finds applications in advanced ceramics and dispersion strengthened metals.
DRY JET WET, djw, textile, spinning technique
This document presents on dry-jet wet spinning. It discusses that dry-jet wet spinning is a modification of wet spinning where the spinning solution is extruded into air and drawn before being submerged in a coagulation bath. This allows benefits of both dry and wet spinning processes. Key aspects of dry-jet wet spinning covered include the extrusion through an air gap, its use for specific polymers like lyocell, and how post-spinning drawing and heating processes can further improve fiber properties. Factors that influence fiber morphology and properties through this process are also summarized.
Gradation of back fill
The contractor requested gradation specifications for pipe bedding material and selected backfill. The engineer provided:
1) Gradation requirements for crushed aggregate pipe bedding material per IS 383 standard with sieve sizes and acceptable % passing ranges.
2) Requirements for selected backfill material per Nepal standard DOR 2073, specifying the material must be 75mm down gravel with sieve sizes and % passing limits, and a plasticity index below 6.
Eagle EPDM Suction Hose - Suction and Discharge Hose
This document provides information about heavy duty suction and discharge hoses from JGB Enterprises. The hoses are made of EPDM rubber with a plastic helix reinforcement and are suitable for liquid waste handling, septic cleaning, chemical transfer, mining, and marine uses between temperatures of -40°F and +140°F. The document lists various hose sizes with their specifications including ID, OD, working pressure, minimum bend radius, weight, and standard length.
Eaglechem® UHMW Chemical Hose - Suction & Discharge Hose
A lightweight flexible Chemical Transfer Hose designed for almost every common industrial chemical used in industry today. Non-staining UHMW tube. Consult chemical resistant chart. Not for steam service, can be open end steam cleaned.
More Related Content
What's hot
prepreg and Resin transfer molding
The document discusses prepreg and resin transfer molding processes for manufacturing textile composites. Prepregs are fibers pre-impregnated with resin that are used to make composites. The processing involves aligning fibers, adding resin-coated backing sheets, and compacting layers. Resin transfer molding injects resin into a closed mold containing fibers to produce near-net shape parts. The process involves pumping resin and catalyst, mixing, injecting the mixture into the mold containing fibers, and curing the part. Both processes produce composites with low void content and control over fiber content and thickness.
High speed slurry-pot type erosion wear tester
The document describes the development of a new high-speed pin mill slurry-pot tester that enables testing materials at speeds up to 20 m/s using large abrasive particles up to 10 mm in size. Previous testers had lower speeds under 10 m/s and used smaller particles under 1 mm. The new pin mill configuration allows for testing of different materials, profiles, and abrasives. Initial tests showed large variability that was addressed through a sample rotation method, reducing standard deviation to under 1%. Tests on wear-resistant rubbers correlated with real-world applications.
Application oriented wear testing of wear resistant steels in mining industry...
Application oriented wear testing aims to simulate real industrial wear processes in the laboratory. Laboratory tests that use similar particle sizes, speeds, and abrasives as actual mining applications provide wear results that better correlate with field tests compared to conventional abrasion tests. The mechanical behavior of wear resistant steels differs in low-stress versus high-stress abrasive conditions, and hardness alone does not determine wear performance. Ductile to brittle transitions can occur on wear surfaces during high-stress abrasion. Application oriented testing is valuable for simulating demanding conditions and improving correlation between laboratory and industrial wear performance.
Laboratory Study on using Waste Glass as Filler in Bituminous Mixes
The document summarizes a study on using waste glass as a filler in bituminous concrete mixes. Bituminous concrete mixes were prepared using three different fillers - cement, lime, and glass powder - at dosages of 4%, 6%, and 8%. Mixes with glass powder displayed similar Marshall and volumetric properties as mixes with conventional fillers. The optimum dosage of glass powder was determined to be 6.2%, at which mixes had higher stability, lower flow values, and density compared to normal mixes. Using glass powder waste as a filler can produce more stable and durable bituminous mixes while providing an environmentally-friendly way to dispose of glass waste from industries.
Learn about the Pultrusion Process Work
Pultrusion is a continuous molding process. It gives a sustainable and long-lasting product. Here present the information about the Pultrusion Process Work. Please visit here.
I cycle
This document describes procedures for determining the Los Angeles abrasion value of aggregates. The test involves placing aggregate samples and steel balls into a rotating steel cylinder. The rotation causes the balls to abrade the aggregate particles. The percentage weight loss of the aggregates after a specified number of rotations is the Los Angeles abrasion value, which indicates the resistance of the aggregates to wear. The test is important because aggregates used in road surfaces need to withstand abrasion from vehicle traffic. The document provides details on the required apparatus, test samples, and step-by-step procedure.
Powder Metallurgy
Powder metallurgy is competitive with other metal forming processes like casting, forging, and machining. It is commonly used to produce parts from metals with high melting points or that are difficult to machine. The basic steps of powder metallurgy are powder production, blending and mixing, powder consolidation through pressing or molding, sintering to strengthen bonds, and optional finishing. Near 70% of powder metallurgy production is for automotive applications due to its ability to produce parts with good dimensional accuracy and control porosity.
2386 1
This document outlines test methods for assessing the particle size and shape of aggregates used in concrete from an Indian Standard published in 1963. It includes procedures for sieve analysis to determine particle size distribution, and tests for materials finer than 75 microns, flakiness index, elongation index, and angularity number. The goal is to assist in evaluating the quality of aggregates used in concrete construction in India by testing relevant properties. Maximum sample weights and sieve sizes are provided for different tests.
Designing silicone molded components for success
The document provides information on designing silicone components for manufacturability. It discusses key rules for success, including understanding capabilities and customer requirements. It also covers material selection and properties, mixing and milling processes, colorants, tolerances, inspections, flash extension allowances, and tooling considerations. The overall message is that designing with manufacturability in mind from the beginning enhances the likelihood of project success.
Company profile SAV Chemicals pvt. ltd.
We are Joint venture with Taiwan based Cartell Chemicals. With technology support from Taiwan, SAV Chemical aims to provide a total Instant Adhesive Solution to Indian market for both consumer and Industrial segments. To supply the increasing demand of instant adhesives in India, SAV Chemicals offers a range of different grades and packaging. It is a solution for a product range from low viscosity to high viscosity for applications like rubber, metal, acrylic, wood, flex and so on. With the international quality and packing standards, SAV Chemicals MXBON branded products have the USPS' of Reusable, Quick and Strong Bonding, Higher Shelf Life and Competitive Prices. We are increasing our footprints to pan India and currently started work in major cities in India.
Test On Bitumen
The document discusses various tests conducted on bitumen, including penetration tests to determine hardness, ductility tests to measure adhesion and ability to stretch, viscosity tests to measure resistance to flow, softening point tests using a ring and ball to determine temperature susceptibility, and flash and fire point tests to identify ignition temperatures. In total, nine different tests are outlined that examine key properties of bitumen like hardness, adhesion, flow resistance, temperature performance, and ignition points.
Frequently Asked Questions about Rotational Moulding
Rotomoulding can be used to create thick-walled plastic products in a variety of sizes and materials. It is a versatile process that allows for complex shapes without seams or joints. While more expensive than blowmoulding for high volumes, rotomoulding is well-suited for low volume or customized parts due to relatively low setup costs. Proper design, material selection, and manufacturing techniques are keys to optimizing the strength and lifespan of rotomoulded products.
Shape tests of aggregate
Shape tests of aggregate for highway material construction. it includes Flakiness Index,Elongation Index and Angularity Number
Optimizing Powder Coating Usage
This document summarizes a project to optimize powder coating usage at a plant in Juarez, Mexico. The project aimed to reduce inconsistencies in paint thickness and consumption by upgrading from a manual to an automatic powder coating system. Key steps included integrating 12 automatic guns into the existing booth, setting recipes for high-volume parts, performing daily thickness checks, and collecting/analyzing the data. Results included a 20% reduction in average paint thickness, more consistent quality between shifts/operators, and reduced waste disposal. Lessons included reviewing available used equipment at other plants first and involving production employees in the process.
Rotational Moulding Conference Workshop - Question 1
Material specifications for rotomoulding powders are important because they provide information about properties that affect the molding process. These specifications include the melt flow index, dry flow rate, bulk density, and particle size distribution which influence how easily the powder will flow into all areas of the mold. Variations in these properties between batches of powder supplied can negatively impact the quality of molded parts by causing uneven wall thicknesses, gaps, and voids if not monitored. It is recommended to request and review certificates of analysis which specify these material properties for each batch received.
A Review Tribological analysis of Cast Iron by Advanced Coating
In our engineering system, friction, wear and tribology are not phenomena that most peoples are considering on daily basis. Wear tribological process occurs when two surfaces are in contact and both one are moving relative to each other. The cast iron is widely used in industrial sector. It have high rate of friction. To reduce the friction the various types of coating is analyzed as well as with lubrication the rate of wear decreases. Prof. Matin A. Shaikh | Prof. Ajij A. Shaikh | Prof. Mrs. G. V. Patil ""A Review: Tribological analysis of Cast Iron by Advanced Coating"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29871.pdf
Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/29871/a-review-tribological-analysis-of-cast-iron-by-advanced-coating/prof-matin-a-shaikh
DuraForm Flex Plastic - SLS Systems - Material properties (EN)
A durable, rubber-like material with good tear resistance and burst strength. Address broad applications requiring rubber-like flexibility and durability. For Gaskets, hoses and seals applications, etc.
Hot pressing
Hot pressing is a technique that combines powder compaction and sintering into a single step. Powder is placed in a graphite die and sintered under pressure and heat. This allows densification of materials that otherwise have poor sintering behavior. The process involves placing powder in a die and applying heat and pressure simultaneously. The temperature increases during compaction to allow sintering through mechanisms like plastic deformation and diffusion. Hot pressing produces fully dense materials in less time compared to conventional sintering. It finds applications in advanced ceramics and dispersion strengthened metals.
DRY JET WET, djw, textile, spinning technique
This document presents on dry-jet wet spinning. It discusses that dry-jet wet spinning is a modification of wet spinning where the spinning solution is extruded into air and drawn before being submerged in a coagulation bath. This allows benefits of both dry and wet spinning processes. Key aspects of dry-jet wet spinning covered include the extrusion through an air gap, its use for specific polymers like lyocell, and how post-spinning drawing and heating processes can further improve fiber properties. Factors that influence fiber morphology and properties through this process are also summarized.
Gradation of back fill
The contractor requested gradation specifications for pipe bedding material and selected backfill. The engineer provided:
1) Gradation requirements for crushed aggregate pipe bedding material per IS 383 standard with sieve sizes and acceptable % passing ranges.
2) Requirements for selected backfill material per Nepal standard DOR 2073, specifying the material must be 75mm down gravel with sieve sizes and % passing limits, and a plasticity index below 6.
What's hot (20)
Application oriented wear testing of wear resistant steels in mining industry...
Application oriented wear testing of wear resistant steels in mining industry...
Laboratory Study on using Waste Glass as Filler in Bituminous Mixes
Laboratory Study on using Waste Glass as Filler in Bituminous Mixes
Frequently Asked Questions about Rotational Moulding
Frequently Asked Questions about Rotational Moulding
Rotational Moulding Conference Workshop - Question 1
Rotational Moulding Conference Workshop - Question 1
A Review Tribological analysis of Cast Iron by Advanced Coating
A Review Tribological analysis of Cast Iron by Advanced Coating
DuraForm Flex Plastic - SLS Systems - Material properties (EN)
DuraForm Flex Plastic - SLS Systems - Material properties (EN)
Similar to Eagle Bulk® Material HD Hose - Heavy-Duty Bulk Transfer Hose - Material Handling hose
Eagle EPDM Suction Hose - Suction and Discharge Hose
This document provides information about heavy duty suction and discharge hoses from JGB Enterprises. The hoses are made of EPDM rubber with a plastic helix reinforcement and are suitable for liquid waste handling, septic cleaning, chemical transfer, mining, and marine uses between temperatures of -40°F and +140°F. The document lists various hose sizes with their specifications including ID, OD, working pressure, minimum bend radius, weight, and standard length.
Eaglechem® UHMW Chemical Hose - Suction & Discharge Hose
A lightweight flexible Chemical Transfer Hose designed for almost every common industrial chemical used in industry today. Non-staining UHMW tube. Consult chemical resistant chart. Not for steam service, can be open end steam cleaned.
BOPP-Sintered-Wire-Cloth
This document provides information on various sintered wire cloth products from BOPP including Poremet, Absolta, Topmesh, and Poreflo. It describes the materials, layers, and manufacturing process for each product. It also details their applications in filtration and specifications including thickness, pore size, flow rate, and pressure resistance. Custom solutions can be developed to meet specific customer needs.
EAGLE VAC Hose - Material Handling Hose
EAGLE VAC Hose - Special Design Abrasive Suction Hose. Special hose for high performance suction equipment for transport of dry or wet media such as mud, sand or blasting media.
Vibasia plastic catalogue
For years, Shandong Vibasia import and export company has gain great reputation in supplying industrial rubber and plastic products,Serving 10,500 customers and selling serial of industrial items.Located in Hebei,Our factory covers 100000 square meters and has 1,200 employees.
We are professional producer of PTFE,PVC,POM,HDPE,UHMWPE and Nylon products.We have many years of knowledge and experience in manufacturing and supplying plastic . During this time we have created a diverse, high quality product range of plastic solutions fitting to meet the needs of today's application demands.
To make ordering quick and easy,we employ friendly and experienced worker for international trading department.In addition ,we offer call service with Specifications of our products. Our foreign trading department proved we are serious with our customers time.
www.sdzytrade.en.alibaba.com continues to be the most popular way to shop rubber and plastic.Our website is all our rubber and plastic products including updated invention and mail space for any questions.
Vibasia is a different type of company,our founder placed 10% profit in a foundation that devoted to provide pure waters for third world countries children.
For more information about our mission or our company. Please visit www.sdzytrade.en.alibaba.com.
Cp500 eng x3
The CP 500 pneumatic hand tool is ideal for strapping heavy goods for transport, providing a tension force of up to 5,000 N using polyester or polypropylene straps between 12-25mm wide. It allows for easy, high-speed tensioning and sealing of straps with simple insertion and maintenance-friendly design. Key advantages include easy handling, high tension for industrial use, strong seals, and a compact, ergonomic form.
Eagle Honey Bee Liquid Suction & Wastewater Hose
This document provides information on the Eagle Honey Bee Hose from JGB Enterprises for pumping, rental, construction dewatering, trash pumps, septic and wastewater handling applications. It lists specifications for polyethylene tube and rib reinforced hoses in 2-inch and 3-inch diameters with temperature ranges from -40°F to 150°F. Features highlighted include superior flexibility, remaining flexible in sub-zero temperatures, being crush resistant and easy to slide, and having leak proof cuffed ends.
Eagle UREMAT & UREMAT HD Hose - Material Handling Hose
Eagle UREMAT & UREMAT HD Hose - Material Handling Hose - Polyurethane Lined Hose for Abrasives Handling.
For abrasive material handling such as pellets, rocks, sands, chips, grains transfer; sand shot line, bark blow line, lawn/mulch/straw collection; industrial vacuum cleaning.
Pvc oxygen hose - oxygen and acetylene hoses for sale
Pvc oxygen hose - oxygen and acetylene hoses for sale
Construction:
Tube: PVC material
Reinforcement: 1ply or 2ply high tensile polyester braiding.
Cover: PVC,black,blue
Application: Being widely used in welding machine,architeture
and lacquer factory.
Characteristics:
high tensile polyester reinforced.
Work under high pressure 300psi.
Strong peeling adhesion between fibre and pvc.
light,flexible,non-kinking,non-twisting.
UV and ozone resistant,weather resistant..
Can be used for jackhammer hose.
Temperature: -10°C(-50°F) to 65°C（+150°F）
Eagle Heavy Duty Nitrile Hose
A heavy duty layflat hose designed irrigation or pumping sludge and liquid fertilizers, the chemical industry and refineries. Custom Manufactured JGB Frac hose assemblies utilizing Through-the-weave-technology without delamination issues. 660 feet is the standard length.
F1010R PTFE Fitting
Ace Glass manufactures compression fittings, stopcocks, and related products made of chemically resistant PTFE and PVDF materials. Their catalog lists various tube compression fittings, elbows, unions, and stopcocks in a wide range of sizes to connect tubing for use under vacuum or pressure. The wetted surfaces are PTFE to be chemically resistant and the fittings use compression styles to grip the tubing securely.
Technical data about carbon fiber plate
This topic describes the Technical data of carbon fiber plate.
For more question,please visit our page: www.xccarbonfiber.com
Or contact us at: info@xccarbon.com
Pneumatic Tensile Grips from Tinius Olsen
Heavy duty vise grip. It is supplied with three sets of interchangeable jaw faces: crosshatch, flat alloy and corrugated. The depth of corrugation is graduated to reduce the amount
of gripping stress at the front edge of the jaw face. Additional jaw faces are available including rubber faced or grab test jaws.
Web: www.TiniusOlsen.com
Contact Us: info@TiniusOlsen.com
Agricultural Hose / Farm Hose / Agricultural Tubing / Agricultural Hose Assem...
Agricultural Hose / Farm Hose / Agricultural Tubing / Agricultural Hose Assem...JGB Enterprises, Inc.
JGB Enterprises provides a wide range of Agricultural Hose / Farm Hose / Agricultural Tubing solutions, including bulk hose and custom assemblies. JGB meets the needs of both OEM’s and Fertilizer Equipment Parts Dealers through any of our five stocking warehouses and fabrication facilities. We provide Hose Kits, Boxed lengths and Private Branded hose upon request. JGB carries Agricultural Hoses / Farm Hoses and Assemblies for agriculture and farming: Light Agricultural Spraying, Agriculture Liquid Fertilizers, Irrigation, Air Seeder Lines, and Agricultural Weed Spraying. Needle punch nonwoven applications
Needle punch is the second-largest market segment in terms of capacity after the spunbond process segment. It is a continuously growing market with new opportunities and growing demands in its core applications like automotive, geotextiles, filtration, and home products.
For more information log on to www.ategroup.com.
Techfluid Industrial Hose
This document provides specifications for various industrial hoses from Techfluid including oil delivery hoses, bulk material handling hoses, and air hoses. It lists the hose types with their internal diameter, working pressure, temperature range, and other technical specifications. It also describes optional features like floating hoses and heat tracing for different applications like oil delivery, bulk material handling, potable water, and air.
Rock shield net & fleece
The rockshield net and fleece are alternatives to traditional sand bedding for protecting pipes from damage. The net absorbs impacts and distributes loads to avoid damages from ground settlement. It is shock-absorbing, deforms to limit pressure, and is resistant to tearing, corrosion, water, and soil agents. The fleece also provides protection and is made of compressed polypropylene. Both products are installed by overlapping with flames or pins and protect pipe coatings from earth at high temperatures.
Thomaplast II english
This document provides information on semi-finished products available from Reichelt Chemietechnik GmbH + Co, including tapes, foils, plates, wires, rods, pipes, cords, and profiles made from various materials such as elastomers, plastics, glass fiber, ceramic, metals, and foam rubbers. The document consists of product descriptions, specifications, and ordering information for each type of semi-finished product.
Techfluid rig supply hose
Techfluid Rig Supply Selection Selection
Techfluid offer a comprehensive range rig supply of hoses used for the transfer of products from the supply vessel to offshore platforms and drilling rigs. The hose structure is designed to provide superior load and abrasion resistance suitable for any offshore environment. We also offer custom designed hoses built to individual requirements. Every hose is hydrostatically tested and provided with full certification.
Hdpe ppt
High density polyethylene (HDPE) is a thermoplastic polymer produced from ethylene monomer. HDPE geomembranes are made from polyethylene resin, carbon black, and additives. Although HDPE is less flexible than LLDPE, it provides higher strength and can withstand higher temperatures. Common uses of HDPE include waterproof membranes for basements, roofs, tunnels, pools, and pond liners. HDPE has high elongation, puncture resistance, tensile strength, and resistance to chemicals, corrosion, and UV light. Properties are tested through methods like tensile testing, MVTR, and peel adhesion tests.
Similar to Eagle Bulk® Material HD Hose - Heavy-Duty Bulk Transfer Hose - Material Handling hose (20)
Eagle EPDM Suction Hose - Suction and Discharge Hose
Eagle EPDM Suction Hose - Suction and Discharge Hose
Eaglechem® UHMW Chemical Hose - Suction & Discharge Hose
Eaglechem® UHMW Chemical Hose - Suction & Discharge Hose
Eagle UREMAT & UREMAT HD Hose - Material Handling Hose
Eagle UREMAT & UREMAT HD Hose - Material Handling Hose
Pvc oxygen hose - oxygen and acetylene hoses for sale
Pvc oxygen hose - oxygen and acetylene hoses for sale
Agricultural Hose / Farm Hose / Agricultural Tubing / Agricultural Hose Assem...
Agricultural Hose / Farm Hose / Agricultural Tubing / Agricultural Hose Assem...
More from JGB Enterprises, Inc.
Thunderblast® Sandblast Hose 2/4 Ply - Material Handling Hose - Bulk Transfer...
Thunderblast® Sandblast Hose 2/4 Ply - Material Handling Hose - Bulk Transfer...JGB Enterprises, Inc.
Sandblast hose specifically designed for use in all abrasive blast applications and suitable for all blasting media. Thunderblast® hose features a static conductive natural rubber tube with four ply high tensile steel wire reinforcement, and an abrasion resistant SBR cover. It is available in 200 ft. rolls or 50 assemblies coupled with quick disconnects or nozzle holder ends.
1/2", 3/4", and 1" ID
-22°F to +185°F
Steel NPT Wire Strainer - Hose Accessories
Square Hole Ring Welded Basket Strainer. The Steel NPT Wire Basket Strainer can be fixed to suction lines or non-return valves to filter any large particles that may cause pump damage.
Pressure Wash Hose & Gun Kit - Hose Accessories
Pressure Wash Hose and Gun Kit - Hose Accessories. Designed for use on pressure washer machines with working pressures up to 4000 psi and temperatures up to 300°F. Comes in 100 ft. lengths.
J-FLEX Hydraulic Hose – Specialty Snow Grooming
J-FLEX specialty, medium to high pressure hydraulic hose for snow making.
High Pressure SAE 100R12 hydraulic hose for petroleum and water-based hydraulic fluid. It contains 4 spiral plies of heavy wire wrapped in alternating directions. One braid or ply of material may be used over the inner tube and/or over the wire reinforcement binding the synthetic rubber to the wire. Reinforced with four high tensile steel spirals, this hose is designed for hydraulic systems with high peak pressures and arduous operating conditions. The special synthetic cover is designed to resist hydraulic oil, weather, and abrasion. The synthetic rubber tube is resistant to mineral, vegetable, and glycol based hydraulic oils. A MSHA cover is available.
J-FLEX® 2M 2SN/SAE 100R2AT for medium to high pressure hydraulic systems in industry and agriculture. The synthetic rubber tube is resistant to hydraulic fluids, and the MSHA approved synthetic rubber cover is abrasion and ozone resistant. Various covers are available for this hose.
J-FLEX® Hot Oil 2SC Hose – Hydraulic Oilfield Hose
Hydraulic Oilfield Hose. High Temperature Oil Hose - 2350 PSI - Specially formulated high temperature oil hose.
J-FLEX 16 SAE 100R16 Hose - Hydraulic Hose
Medium - High Pressure Hydraulic Hose. SAE 100R16 hydraulic hose consists of 1 or 2 braids of steel-wire reinforcement, and is used for high-pressure hydraulic applications requiring high flexibility and tight bends. The cover is oil and weather resistant synthetic rubber.
This hose is designed to be used with hydraulic oils, minerals, and vegetable lubricants. It is a medium pressure hydraulic hose with various cover available. It comes standard with an anti-abrasion synthetic rubber cover.
1/4" to 1" ID
-40° to 212°F
J-FLEX 15M SAE 100R15 Hose - Hydraulic Hose
High Peak Pressure Hydraulic Hose with Improved Flexibility. SAE 100R15 hydraulic hose is only for use with petroleum-based hydraulic fluids. The hose has multiple spiral plies of heavy wire wrapped in alternating directions. A braid or ply of material may be used over or within the inner tube and/or over the wire reinforcement to bind the wire and rubber.
This hose is compatible with biodegradable hydraulic fluids like vegetable oil as well as mineral and glycol based hydraulic fluids. It consists of an inner tube of oil-resistant special synthetic rubber, 4 or 6 spiral plies of heavy wire wrapped in nating directions, and an oil, abrasion, and weather-resistant special rubber cover. A MSHA cover is available.
3/4" to 1-1/2" ID
-40°F to +248°F (+257 °F discontinuous)
J-FLEX 12M SAE 100R12 Hose - Hydraulic Hose
High Pressure Hydraulic Hose. SAE 100R12 hydraulic hose for petroleum and water-based hydraulic fluid. It contains 4 spiral plies of heavy wire wrapped in alternating directions. One braid or ply of material may be used over the inner tube and/or over the wire reinforcement binding the synthetic rubber to the wire.
Reinforced with four high tensile steel spirals, this hose is designed for hydraulic systems with high peak pressures and arduous operating conditions. The special synthetic cover is designed to resist hydraulic oil, weather, and abrasion. The synthetic rubber tube is resistant to mineral, vegetable, and glycol based hydraulic oils. A MSHA cover is available.
3/8" to 2" ID
-40°F to 248°F (257°F intermittent)
J-FLEX® XFlex Hose - J-FLEX® 4SH XFLEX Hydraulic Hose
J-FLEX® XFlex Hose - J-FLEX® 4SH XFLEX Hydraulic Hose - Hydraulic systems with high peak pressures and arduous operating conditions needing extremely high flexibility. Due to its extreme flexibility, XFlex is perfect for use in extraordinarily tight positions. Tube: Oil-resistant synthetic rubber.
J-FLEX 4 SAE 100R4 Hydraulic Hose - Aromatic Resistant Hydraulic Return Hose
SAE 100R4 hydraulic hose with one or more plies of woven or braided textile fibers and a spiral of body wire. It is used most often for return and suction lines in low pressure and vacuum applications.
This hose is for use in low pressure hydraulic systems to return the oil to tank for reuse. It is resistant to aromatic content less than 40%. Working pressures range from 56 to 300 PSI depending on ID size. It comes in lengths up to 200 feet.
3/4" to 3" ID
-40°F to 212°F
J-FLEX 2SN5K Exceeds 100R2AT Hose - Hydraulic Hose
J-FLEX 2SN5K Exceeds 100R2AT hose was developed to withstand punishing conditions such as pulsating pressures, hose flexing, and temperature fluctuations with petroleum based hydraulic fluids. A MSHA accepted cover is available for this hose cover. This has extraordinary flexibility; excellent bend radii properties; superior performance under flex-impulse conditions; exceptional long life.
J-FLEX® 1 SAE 100R1AT/1SN Hose – Hydraulic Hose
Designed for low to medium pressure hydraulic systems in industry and agriculture. The synthetic rubber tube is resistant to hydraulic fluids, and the MSHA approved synthetic rubber cover is abrasion and ozone resistant. Various covers are available for this hose.
1/4" to 1" ID
-40°F to 212°F (max 248° intermittent)
Eagle Water Jetting Hose – Waterblast Hose
Eagle Water Jetting Hose – High Pressure Water Jetting Hose - Waterblast Hose - Stripping layers from hard surfaces, strip mining and washdown applications.
Eagle Red PVC HD Discharge Hose – Water Discharge Hose
Red heavy duty lay flat water discharge hose for use with higher working pressures in agricultural, quarry, mining, industrial, and construction applications. It is reinforced with two spiral plies and longitudinal synthetic cords for strength, and comes with standard short shank aluminum, malleable, or brass couplings.
1.5" to 8" ID
. Eagle Tank® Truck 300 PSI Hose - Corrugated Hose - Oilfield Hose
Eagle Tank® Truck 300 PSI Hose - a corrugated, oil resistant, petroleum suction & discharge hose designed for the transport off mineral oil products and fuel mixtures with up to 50% aromatic content.
2", 3", 4", 6" & 8" ID
-40°F to 180°F
Eagle Tank® Truck 150 Hose - Petroleum Hose - Petro Transfer Hose
Eagle Tank® Truck 150 Hose - Petroleum Hose - Petro Transfer Hose. The hose is constructed of a black oil and fuel-resistant rubber tube and reinforced with synthetic textile and a twin steel wire helix for heavy-duty suction of petroleum products at 150 psi. It is for use in bulk petroleum stations, tank trucks, and in-plant oil service. The cover is abrasion, ozone, weather, heat & oil resistant.
1-1/2" to 8" ID
Eagle Slim Hole Rotary Hose - Oilfield Drilling Hose - Rotary Drilling Hose
Eagle Slim Hole Rotary Hose - Oilfield Drilling Hose - Rotary Drilling Hose. Specially designed for use in portable, work-over and seismograph drilling rigs, this hose is reinforced with 4 or 6 spiral wires and has a cover that is abrasion, ozone, hydrocarbon and flame resistant. The tube is oil resistant synthetic rubber. It can withstand temperatures up to 200° F (+93° C) in constant operation.
1" to 3" ID
-40°F to 200°F
Eagle PU Vapor Recovery Hose - Tank Truck Vapor Recovery Hose - Petroleum Hose
Eagle PU Vapor Recovery Hose - Tank Truck Vapor Recovery Hose - Petroleum Hose designed for anti-static tank truck vapor recovery.
Features:
Biofuel Compatible - Revolutionary polyurethane compound! Specially designed to handle gasoline, ethanol (Meeting ASTM D5798, D4806 or D6751 criteria.), diesel and biodiesel (Meeting ASTM D5798, D4806 or D6751 criteria.) vapors... and still keeps all the other great features and benefits!
Non-permeable polyurethane construction -won’t swell or become stiff like conventional TPR/rubber hoses.
Long life reduces operating costs.
Lightweight - much lighter than conventional TPR/rubber hoses.
Superior flexibility - especially in sub-zero weather!
“See-through” construction - for visual confirmation if fuel backs up into the vapor recovery system.
Grounding Wire - Durable multi-strand copper wire dissipates static electricity. Physically extract wire from the rigid helix and bond to the metal coupling (or by other means) to ground.
Easy Slide Helix - Rigid counter clockwise helix design protects hose tube from cover wear; allows hose to slide easily over rough surfaces
Eagle Pump® HD 150 PSI Hose - Water Suction & Discharge Hose
This hose is a water suction and discharge hose made of natural and synthetic rubber for use in medium to heavy-duty industrial and construction applications.
2" to 12" ID
Eagle Orange/Clear Suction and Discharge Hose – Water Suction and Discharge Hose
Eagle Orange/Clear Suction and Discharge Hose – Water Suction and Discharge HoseJGB Enterprises, Inc.
JGB Private Brand - Eagle Orange/Clear Suction and Discharge Hose - This suction and discharge hose is constructed of flexible PVC and a rigid PVC helix with synthetic braiding. It is easy to drag, lightweight and flexible, and perfect for fish suctioning or rental/construction pumping. Banding coils for this hose are also available.
1-1/2" to 10" ID
-13°F to 140°FMore from JGB Enterprises, Inc. (20)
Thunderblast® Sandblast Hose 2/4 Ply - Material Handling Hose - Bulk Transfer...
Thunderblast® Sandblast Hose 2/4 Ply - Material Handling Hose - Bulk Transfer...
J-FLEX® Hot Oil 2SC Hose – Hydraulic Oilfield Hose
J-FLEX® Hot Oil 2SC Hose – Hydraulic Oilfield Hose
J-FLEX® XFlex Hose - J-FLEX® 4SH XFLEX Hydraulic Hose
J-FLEX® XFlex Hose - J-FLEX® 4SH XFLEX Hydraulic Hose
J-FLEX 4 SAE 100R4 Hydraulic Hose - Aromatic Resistant Hydraulic Return Hose
J-FLEX 4 SAE 100R4 Hydraulic Hose - Aromatic Resistant Hydraulic Return Hose
J-FLEX 2SN5K Exceeds 100R2AT Hose - Hydraulic Hose
J-FLEX 2SN5K Exceeds 100R2AT Hose - Hydraulic Hose
Eagle Red PVC HD Discharge Hose – Water Discharge Hose
Eagle Red PVC HD Discharge Hose – Water Discharge Hose
. Eagle Tank® Truck 300 PSI Hose - Corrugated Hose - Oilfield Hose
. Eagle Tank® Truck 300 PSI Hose - Corrugated Hose - Oilfield Hose
Eagle Tank® Truck 150 Hose - Petroleum Hose - Petro Transfer Hose
Eagle Tank® Truck 150 Hose - Petroleum Hose - Petro Transfer Hose
Eagle Slim Hole Rotary Hose - Oilfield Drilling Hose - Rotary Drilling Hose
Eagle Slim Hole Rotary Hose - Oilfield Drilling Hose - Rotary Drilling Hose
Eagle PU Vapor Recovery Hose - Tank Truck Vapor Recovery Hose - Petroleum Hose
Eagle PU Vapor Recovery Hose - Tank Truck Vapor Recovery Hose - Petroleum Hose
Eagle Pump® HD 150 PSI Hose - Water Suction & Discharge Hose
Eagle Pump® HD 150 PSI Hose - Water Suction & Discharge Hose
Eagle Orange/Clear Suction and Discharge Hose – Water Suction and Discharge Hose
Eagle Orange/Clear Suction and Discharge Hose – Water Suction and Discharge Hose
Recently uploaded
HOW TO START UP A COMPANY A STEP-BY-STEP GUIDE.pdf
How to Start Up a Company: A Step-by-Step Guide Starting a company is an exciting adventure that combines creativity, strategy, and hard work. It can seem overwhelming at first, but with the right guidance, anyone can transform a great idea into a successful business. Let's dive into how to start up a company, from the initial spark of an idea to securing funding and launching your startup.
Introduction
Have you ever dreamed of turning your innovative idea into a thriving business? Starting a company involves numerous steps and decisions, but don't worry—we're here to help. Whether you're exploring how to start a startup company or wondering how to start up a small business, this guide will walk you through the process, step by step.
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
Leaders who possess self-awareness deeply understand their emotions, strengths, and weaknesses.
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
Understanding User Needs and Satisfying Them
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Easily Verify Compliance and Security with Binance KYC
Use our simple KYC verification guide to make sure your Binance account is safe and compliant. Discover the fundamentals, appreciate the significance of KYC, and trade on one of the biggest cryptocurrency exchanges with confidence.
How to Implement a Real Estate CRM Software
To implement a CRM for real estate, set clear goals, choose a CRM with key real estate features, and customize it to your needs. Migrate your data, train your team, and use automation to save time. Monitor performance, ensure data security, and use the CRM to enhance marketing. Regularly check its effectiveness to improve your business.
Business storytelling: key ingredients to a story
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSBest practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Schedule Unveiled
3 Simple Steps To Buy Verified Payoneer Account In 2024
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Creative Web Design Company in Singapore
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Recently uploaded (20)
HOW TO START UP A COMPANY A STEP-BY-STEP GUIDE.pdf
HOW TO START UP A COMPANY A STEP-BY-STEP GUIDE.pdf
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
Easily Verify Compliance and Security with Binance KYC
Easily Verify Compliance and Security with Binance KYC
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
3 Simple Steps To Buy Verified Payoneer Account In 2024
3 Simple Steps To Buy Verified Payoneer Account In 2024
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Eagle Bulk® Material HD Hose - Heavy-Duty Bulk Transfer Hose - Material Handling hose
- 1. Material Handling JGB Enterprises EAGLE Bulk ® Material HD Heavy-Duty Bulk Transfer Hose Part # ID OD Plies Max WP Tube Contruction Weight in in psi lbs/ft 014-0642-0074I 4 4.49 2 75 1/8” 1.67 014-0642-0075I 4 4.72 2 75 1/4” 2.14 Application: Pneumatic transport of abrasive materials such as cement, sand and other dry abrasive bulk materials. Antistatic transfer of materials that create static buildup on the liner (anti-static com- pound in hose liner protects from static electricity.) Tube: 1/4 inch abrasion resistant layer of synthetic and natural elastomer blend, smooth 1/8 inch abrasion resistant layer of synthetic and natural elastomer blend, smooth Reinforcement: High tensile textile cord Cover: Blend of synthetic and natural elastomers, black, smooth with cloth impression, antistatic, abrasion, weather, and ozone resistant. Black SBR Temperature: -30°F to 185°F Couplings: Contact JGB for proper fitting recommendation and coupling procedure. Lengths: 100 ft. JGB ® Headquarters Liverpool, NY 13088 (315) 451-2770 Buffalo Branch Cheektowaga, NY 14225 (716) 684-8224 Southeast Hub Charlotte, NC 28273 (704) 588-9920 St. Louis Branch St. Louis, MO 63123 (314) 487-3144 Williston Branch Williston, ND 58801 (701) 774-2195 Houston Branch Pasadena, TX 77503 (281) 930-7777 Click for directions: Download the JGB® Mobile App ® Connect with us: www.jgbhose.com ISO 9001:2015 Certified WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov