Shandong Vibasia Import & Export Co., Ltd specializes in manufacturing and supplying a range of industrial rubber and plastic products. The company is based in Qingdao, China, and has a significant operational footprint with over 1,200 employees. Additionally, Vibasia is dedicated to social responsibility, pledging 10% of profits to support clean water initiatives for children in developing countries.

1. Vibasia
Shandong Vibasia Import &Export CO.,LTD
Add: No.33 Hai'er Road, Laoshan district,Qingdao 266100 China
Office:0086-532-67785857
Fax: 0086-532-67785857
Web: www.sdzytrade.en.alibaba.com
www.shandongvibasia.com

2. About us
For years, Shandong Vibasia import and export company has gain great reputation in supplying
industrial rubber and plastic products,Serving 10,500 customers and selling serial of industrial
items.Located in Hebei,Our factory covers 100000 square meters and has 1,200 employees.
We are professional producer of PTFE,PVC,POM,HDPE,UHMWPE and Nylon products.We have many
years of knowledge and experience in manufacturing and supplying plastic . During this time we
have created a diverse, high quality product range of plastic solutions fitting to meet the needs of
today's application demands.
To make ordering quick and easy,we employ friendly and experienced worker for international
trading department.In addition ,we offer call service with Specifications of our products. Our foreign
trading department proved we are serious with our customers time.
www.sdzytrade.en.alibaba.com continues to be the most popular way to shop rubber and plastic.Our
website is all our rubber and plastic products including updated invention and mail space for any
questions.
Vibasia is a different type of company,our founder placed 10% profit in a foundation that devoted to
provide pure waters for third world countries children.
For more information about our mission or our company. Please visit www.sdzytrade.en.alibaba.com.

3. Catalogue
1
2
3
4
POM products
HDPE/UHMWPE
Nylon
PTFE products
5
PVC film

4. PTFE
PTFE provides excellent thermal insulation and
is the most chemically resistant plastic known.
It is unaffected by most corrosive liquids, vapors
and gases, and conforms to both FDA and AMS
specifications. PTFE will insulate to 500 volts per mil
and does not melt. Because of these properties, PTFE
gaskets, washers and seals are used in the following
industries:
• Electrical Applications
• Food, Beverage & Pharmaceutical
• Laboratories
• Petrochemical & Chemical Processing
• Semi-Conductor

5. Carbon/graphite filled PTFE
Smooth surface,black
100% Virgin PTFE
Ultra smooth surface,no stain
Meet all
your
need
Design
available
Different PTFE Proportion
bronze filled PTFE
Smooth surface,brown
Super
precise
Glass filled Virgin PTFE
Customized PTFE proportion

6. Virgin PTFE rod
Virgin PTFE
sheet
Virgin PTFE
tube
Mold rod
Dia 200-500mm
Standard length
0.1m 0.3m
Extruded rod
Dia 5-200mm
Standard length 1m
Mold sheet
Thickness10mm-
120mm
Standard
size1mX1m
Skived sheet
Thickness0.08mm-
10mm
Mold tube
OD 200-500mm
Wall thicknes 5mm-
200mm
Extruded tube
OD 14-458mm
Wall thicknes 1.5mm-
10mm
Mold gasket
as standard size
list
Machining
gasket
as drawing
PTFE products
Virgin PTFE parts
Mold parts
as drawing
Machining
gasket
as drawing
Virgin PTFE
gasket

7. 25% carbon filled
(23%carbon+2%graphite)
35% carbon filled
(33%carbon+2%graphite)
40% broze filled
55% broze filled
60% broze filled
10% glass filled
15% glass filled
25% glass filled
70%virgin
50%virgin
20%virgin
100%recycled
PTFE products
Carbon filled
PTFE
Broze filled
PTFE
Glass filled
Virgin PTFE
Customized PTFE
proportion

8. 25% carbon filled
(23%carbon+2%graphite)
35% carbon filled
(33%carbon+2%graphite)
40% broze filled
55% broze filled
60% broze filled
10% glass filled
15% glass filled
25% glass filled
70%virgin
50%virgin
20%virgin
100%recycled
PTFE data sheet
Carbon filled
PTFE
Broze filled
PTFE
Glass filled
Virgin PTFE
Customized PTFE
proportion

9. 1 2
3 4
• For ball valves used
in chemical handling
• PTFE components
used by the Gas & Oil
Industry
• PTFE Parts used for
electrical generation &
distribution
•PTFE Wafer Dippers & custom
containers for semiconductor
and a variety of other R&D
applications
Applications

10. PVC film
Super clear Electrostatic protective film
PVC static film doesn’t have adhesive, it's a protective
film that sticks on surface by electrostatic adsorption.
These items are widely used for the surface of smooth
products, such as glass, mirror, shining plastic, acrylic etc.
The backing of PVC static film is Polyvinyl Chlo-ride,
abbreviated PVC, with static finish.

11. Machine Cutting
super precise
Ultral clear,
no odour
Air bubbles and
nonuniform
Hand cutting
rough edges
odour
Ultra clear film VS Common film
Feathers
Ultra clear
PVC
Electrostatic
protective
film
Common
PVC
Electrosta
tic
protective
film
Cooling process involved during
production-Ultra smooth and
clear no air bubble.

12. Pictures

13. Thickness:0.01mm, 0.02mm, 0.03mm
0.04mm 0.05mm
0.07mm,0.1mm,0.13mm,0.2mm 1mm,2mm
Width:50cm,1m , Customized size
accepted.free cutting service
length:150m/roll, 200m/roll ,300m/roll
Color:Transparent, white , black,red,
blue,red,yellow or customed
Tensile strengh:16N/mm2
Tearing resistance:50N/mm
meet RoHs standard,glue free
Processing Type:Blow Molding
working condition:-40ºC---+120ºC
Hardness:70-92shoreA
Core material:Paper/PVC/PP
Elogation:350%
Density:1.3g/m3
Specifications

14. • plastic industry: ABM.PP injection products, PVC
plate, acrylic board, instrument, plastic lens, spray oil
surface protection, etc.
•printing industry: PVC.PC board, aluminum plate, film
and other printing inscriptions on the surface
protection.
• hardware industry: computer case, galvanized sheet, aluminum
plate, stainless steel plate, titanium plate, steel plate, plywood etc..
•photoelectric industry: MCD liquid crystal display, car lens,
glass surface, backlight plate, cold light film, film switch,
mobile phone screen and so on.
1
2
3
Application

15. POM
POM rod,sheet,tube machining&moldparts
POM is a white (natural) Polyacetal, commonly
referred to as POM (Polyoxymethylene) or Acetal.
This material has excellent physical and chemical
properties to serve a wide range of applications. POM
is very stable in wet and dry environments and is
recommended for precision and close tolerance parts.
POM has very low moisture absorption compared to
standard nylons and is also FDA approved.

16. POM rod POM sheet POM tube
Mold rod
Dia 250-550mm
Standard length
0.1m 0.2m 0.3m
Extruded rod
Dia 5-300mm
Standard length 1m
Mold sheet
Thickness15mm-
150mm
Standard
size1mX1m
Extruded
sheet
Thickness1mm-
25mm
Mold tube
OD 200-500mm
Wall thicknes 5mm-
200mm
Extruded tube
OD 15-450mm
Wall thicknes 1.5mm-
10mm
POM products
POM parts
Mold parts
as drawing
Machining
Parts
as drawing

17.  Guide rings
 Bushes
 Back up rings
 Scrapers Housings
 High precision parts
 R = Resistance
 S = Suitable
 U = Unsuitable
PHYSICAL
PROPERTIES
KEY TO
CHEMICAL
RESISTANCEMAIN
APPLICATIONS
POM Data
PHYSICAL
PROPERTIES STANDARD UNIT VALUE
Specific Gravity DIN 53479 g/cm³ 1.41
Moisture absorption
at 20°C / 65%
rel.M % 0.2
Tensile Strength DIN 53455 N/mm² 70
Elongation at break DIN 53455 % 40
Ball hardness H358/3 DIN 53456 N/mm² 60
Modulus DIN 53457 N/mm² 3300
Coefficient of sliding µ <0.4
Melting Temperature °C 164-167
Min Service
Temperature °C -60
Max Service
Temperature °C 100
CHEMICAL
RESISTANCE
Water up to 70°C R
Water up to 90°C R
HFA Fluids R
HFB Fluids R
HFC Fluids R
HFD Fluids U
Mineral Oils R
Vegetable Oils R
Fuels R
Ozone U
Air up to 100°C R
Air up to 150°C U
Air up to 200°C U

18. Polyethylene
HDPE/UHMWPE
Tough, Chemical Resistant, Engineering Plastics
• High density PE – (HDPE) or 300 grade
For - transport containers, pump and valve parts
tank construction,components with medical applications, gaskets, slide
profiles, components for the food industry.
• Ultra-high-molecular-weight PE –(UHMW-PE) or 1000 grade
For - pump & valve parts, gaskets, glide profiles, parts for the food
industry.
Product Description:
High-quality general purpose engineering plastic materials;
the chemical name is polyethylene. It’s available in a range
of grades and forms to suit many applications.

19. Machinability
Physiological
Safety
Chemical
Resistance
Machining of polyethylene is uncomplicated
provided component tolerances allow for
polyethylene's relatively high co-efficient of
thermal expansion and tensile elongation
values. Full machining instructions can be
supplied on request.
HD-PE has extremely good resistance to aqueous solutions
of acids, alkalis and salts. Also alcohol and many solvents.
Slight swelling may be caused by permanent contact with
grease, oil and wax, but generally not enough to limit the
use of the material. Aromatics and halogen hydrocarbons
will cause a reduction in useful working life.The material
has no resistance to strong oxidization agents such as nitric
or chromic acids, and halogens
UHMWPE grade has even better chemical resistance;
strong oxidization agents only cause surface swelling
Range of grades available
Able to resist very high impact loads
UHMWPE is resistant to extreme abrasion
Low density - compared with other engineering plastics
Technical Description
Product
Attributes
FDA (US Food & Drug Administration) has approved
raw materials used for both the HD-PE and UHMWPE
grades to allow their use in contact with food – check for
any specific limitations required by the FDA.

20. rod sheet tube
Mold rod
Dia 250-550mm
Standard length
0.1m 0.2m 0.3m
Extruded rod
HDPE 10mm to
700mm dia in black
(to 500mm dia in
natural) ≤ 2m
UHPWPE 20mm to
300mm in natural,
Mold sheet
Thickness15mm-
200mm
Standard
size1mX1m
Extruded
sheet
Thickness1mm-
25mm
Mold tube
From 30mm o/d x
15mm i/d to
200mm o/d x 120mm
i/d in 2m length
Extruded tube
OD 15-450mm
Wall thicknes 1.5mm-
10mm
HDPE&UHMWPE products
parts
Mold parts
as drawing
Machining
Parts
as drawing

21. HDPE/UHMWPE
Tough, Chemical Resistant, Engineering Plastics
• High density PE – (HDPE) or 300 grade
For - transport containers, pump and valve parts
tank construction,components with medical applications, gaskets, slide
profiles, components for the food industry.
• Ultra-high-molecular-weight PE –(UHMW-PE) or 1000 grade
For - pump & valve parts, gaskets, glide profiles, parts for the food
industry.
Product Description:
High-quality general purpose engineering plastic materials;
the chemical name is polyethylene. It’s available in a range
of grades and forms to suit many applications.
HD PE UHMWPE
Mechanical Properties
Density at 20ºC 0.95 0.93 g/cm3
Tensile strength @ yield 27 17 MPa
@ break 35 40 MPa
Elongation @ yield 9 ≥ 20 %
@ break ≥ 700 ≥ 50 %
Tensile modulus of elasticity 1150 600 MPa
Flexural strength 22 27 MPa
Impact strength No break No break kJ/m2
Notched impact strength 29 No break kJ/m2
Ball indentation hardness / Rockwell - 35 N/mm2
Hardness (Shore D) 64 51 -
Electrical Properties
Volume resistivity ≥ 1015 ≤ 1014 Ohm cm
Surface resistivity ≥ 1016 ≤ 1012 Ohm
Dielectric constant @ 1 MHz 2.35 3.0 -
Dielectric loss factor @ 1 MHz 0.0003 0.0001 -
Dielectric strength 17 45 Kv/mm
Tracking resistance – IEC 60112 - KB ≥ 600 V
Thermal Properties
Vicat softening point -VST/B/50 80 80 ºC
-VST/A/50 129 - ºC
Heat deflection temperature -HDT/B 69 65 ºC
-HDT/A - 42 ºC
Coefficient thermal expansion 1.50 2.0 10-4 .K-1
Thermal conductivity at 20ºC 0.42 0.42 W/(m - K)
Service temperatures - upper limit 90 90 ºC
without high mech. load - lower limit -50 -150 ºC
Other Physical Properties
Moisture absorption - ISO 62 0.01 0.001 %
Suitability for bonding + - -
Physiological indifference according to + -
FDA or EEC 90/128 - natural colour
Friction coefficient 0.30 0.25 DIN 53375
Flammability according to UL94 HB HB UL94
UV stability without additives 0 -
Technicaldata

22. Nylon
Nylon6 &Nylon66
Created in 1930 by Wallace Hume Caruthers, Nylon is used for a variety of products because of its heat
resistance and toughness at both high and low temperatures. However, both Nylon 6 and Nylon 6,6 (also
called Nylon 6-6) differ in their uses and chemical properties, making each Nylon suitable for certain
industries and products.
Chemical Compound
Both Nylon 6 and Nylon 6,6's polyamide chains are held together using hydrogen bonds, adding to the
strength and dexterity of the fibers. Nylon 6's crystal structure contains parallel chains with hydrogen bonds
between each chain, forming a more open structure with less internal hydrogen bonding. Compared to Nylon
6's crystal structure, Nylon 6,6 is tighter with less openings, making it the stronger and more resistant to heat
of the two Nylons. Since Nylon 6,6's structure contains no set direction it makes the surface 12 percent
harder and 20 percent more resilient than Nylon 6.
Differences in Properties
Both Nylon 6,6 and Nylon 6 are 100 percent elastic while under an 8 percent extension. However, both differ
in their melting points, with Nylon 6 melting at 216 degrees Celsius and Nylon 6,6 having a melting point of
263 degrees Celsius. This makes Nylon 6,6 the preferred Nylon for temperature performance products. Both
Nylon 6 and 6,6 allow easy dyeing and washing and both provide a chemically stable product.
Preferred Products
Each Nylon is preferred over the other in certain cases due to physical properties. For example, Nylon 6,6 is
preferred over 6 for making carpets because of its higher strength and toughness. Nylon 6 is primarily used in
the textile industry for making clothing, ropes, threads, nets and garments while Nylon 6,6 is used for tire
ropes, gear wheels, friction bearings and plug parts.

23. Rod TubeSheet
Nylon6 & Nylon66 Products
Parts
Cheap Good Fast

24. 2
PROPERTIES
3
MECHANICAL
PROPERTIES
Nylon 6
• Good slide and wear properties
• Resistant to oils, greases and fuels
• High toughness
• Good machinability
• High strength
• Good weldable and bondable
1
MAIN
FEATURES
Typical
value Units Test method
DENSITY 1.14
g/cm
³
WATER
ABSORPTION 0.3/0.6 %
DIN EN ISO
62
FLAMMABILITY
(UL94) HB
DIN IEC
60695-11-10
Typical value Units Test method
MODULUS OF
ELASTICITY 3300 Mpa DIN EN ISO 527-2
TENSILE STRENGTH 79 Mpa DIN EN ISO 527-2
TENSILE STRENGTH AT
YIELD 78 Mpa DIN EN ISO 527-2
ELONGATION AT YIELD 4 % DIN EN ISO 527-2
ELONGATION AT
BREAK 130 % DIN EN ISO 527-2
FLEXURAL STRENGTH 100 MPa DIN EN ISO 178
MODULUS OF
ELASTICITY 2900 Mpa DIN EN ISO 178
COMPRESSION
STRENGTH 24/41 MPa EN ISO 604
COMPRESSION
MODULUS 2700 Mpa EN ISO 604
IMPACT STRENGTH Not broken kJ/m² DIN EN ISO 179-1eU
NOTCHED IMPACT
STRENGTH 7 kJ/m² DIN EN ISO 179-1eA

25. 5
SEMI-FINISHED
PRODUCTS
Nylon 6
4
THERMAL
PROPERTIES
Typical value Units Test method
GLASS TRANSITION
TEMPERATURE 45 °C DIN 53765
MELTING
TEMPERATURE 220 °C DIN 53765
SERVICE
TEMPERATURE
(LONG TERM) 100 °C
SERVICE
TEMPERATURE
(SHORT TERM) 160 °C
• Sheeting:1-150mm*
• Rod:Ø 4 to Ø 300 mm*
• Tube: OD 15-450mm
Wall thicknes 1.5mm-10mm
• Parts:as request

26. PROPERTIES
Test
methods Units VALUES
Colour - - natural (cream)/
black
Density
ISO 1183-
1 g/cm³ 1.14
Water absorption:
- after 24/96 h
immersion in water
of 23 °C (1) ISO 62 mg 40 / 76
ISO 62 % 0.60 / 1.13
- at saturation in air
of 23 °C / 50 % RH - % 2.4
- at saturation in
water
of 23 °C - % 8
Thermal Properties (2)
Melting temperature (DSC, 10 °C/min)
ISO
11357-1/-3 °C 260
Glass transition temperature (DSC, 20
°C/min) - (3)
ISO
11357-1/-2 °C -
Thermal conductivity at 23 °C -
W/(K.
m) 0.28
Coefficient of linear thermal expansion:
- average value between 23 and 60 °C -
m/(m.
K)
- average value between 23 and 100
°C -
m/(m.
K) 95 x 10-6
Temperature of deflection under load:
- method A: 1.8 MPa +
ISO 75-1/-
2 °C 85
Max. allowable service temperature in
air:
- for short periods (4) - °C 180
- continuously : for 5,000 / 20,000 h (5) - °C 95 / 80
Min. service temperature (6) - °C -30
Flammability (7):
- "Oxygen Index"
ISO 4589-
1/-2 % 26
- according to UL 94 (3 / 6 mm
thickness) - - HB / HB
PROPERTITES
Thermal
Properties
Nylon 66

27. Thank for
watching
@
Shandong Vibasia
Import&Export CO.,LTD
Add: No.33 Hai'er Road, Laoshan district,Qingdao 266100 China
Office:0086-532-67785857
Fax: 0086-532-67785857
Web: www.sdzytrade.en.alibaba.com
www.shandongvibasia.com
Scan the code visit
our alibaba website