Dth 1 first page dth
•Download as DOCX, PDF•
0 likes•88 views
This 3 sentence summary provides the high level information from the technical seminar report submitted to Mewar University, Chittorgarh towards the partial fulfillment of a Bachelor of Technology degree in Electronics and Communication Engineering. The report was guided by Mr. Rohit Giri and submitted by Sudhir Kumar Choudhri, a 3rd year B.Tech student in ECE with a roll number of 101305008013 from the Department of Electronics and Communication Engineering at Mewar University's Faculty of Engineering & Technology. The report was submitted in April 2016.
Report
Share
Report
Share
Recommended
5 g 1 first page 5g
This 3 sentence summary provides the high level information from the document:
The document is a technical seminar report submitted to Mewar University in Chittorgarh, India by Tahir Mohi-ud-din Rather towards partial fulfillment of a Bachelor of Technology degree in Electronics and Communication Engineering for the 2015-2016 session, with Mr. Rohit Giri as the guiding associate lecturer.
1 first page wpt
This 3-page technical seminar report was submitted by Rameez Raja to Mewar University's Department of Electronics and Communication Engineering in partial fulfillment of the requirements for a Bachelor of Technology degree. The report, guided by Associate Lecturer Mr. Rohit Giri, provides an overview of wireless power transmission technology.
Camera surveilance 1 front pg
This document is a technical seminar report submitted to Mewar University in Chitorgarh, India by Salman Javid towards the partial fulfillment of a Bachelor of Technology degree in Electronics and Communication Engineering. The report, guided by Associate Lecturer Mr. Rohit Giri, focuses on camera surveillance and was submitted in April 2016 to the Department of Electronics and Communication Engineering at Mewar University.
Mwe part 1
This certificate is for a student who completed their bonafide record work in the Microwave Engineering Lab during the third semester of their Bachelor of Technology degree in Electronics and Communication Engineering at CMR Institute of Technology. The certificate details the student's name, hall ticket number, academic year, and is signed by the faculty in charge of the lab and the course coordinator to confirm the student satisfactorily completed the lab work.
Nano technology 0 front
This 3 page seminar report was submitted by Nitika Sharma to Mewar University in partial fulfillment of the requirements for a B.Tech degree. The report, guided by Assistant Professor Rohit Giri, provides an overview of nano technology. It discusses nano technology and its applications in various fields like electronics, energy, and medicine.
NIT Trichy Recruitment 2015-16 Nitt.edu Job Opportunities Apply
job seekers who want to apply for NIT Trichy jobs may get information about essential qualification, age limit, selection process, applying process, salary structure, important dates, etc. from the below section of this page which is well modified by the dedicated team of http://www.recruitmentinboxx.com/nit-trichy-recruitment/5644/
sk me (1)
Shailesh Vishnu Kumbhar is seeking a position that allows him to utilize his skills in electronics and telecommunications. He has a M.E. in electronics from Shah and Anchor Kutchhi Engineering College and a B.E. in electronics and telecommunications from DR. Daulatrao Aher College of Engineering. His work experience includes system and network testing and support as a trainee at Reliance Jio Infocomm. He has published papers on cognitive radio sensor networks and a zigbee-based home patient monitoring system. His interests include sports, music, traveling and reading.
Dth 2certificate
This certificate confirms that Sudhir Kumar Choudhri, with roll number 101305008013, submitted a technical seminar report titled "DHT TECHNOLOGY" to partially fulfill the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report was reviewed by Mr. Rohit Giri and found to meet the prescribed format and be satisfactory. The report was approved for presentation by the head of the Electronics and Communication Engineering department, Ms. Shilpa Jangid.
Recommended
5 g 1 first page 5g
This 3 sentence summary provides the high level information from the document:
The document is a technical seminar report submitted to Mewar University in Chittorgarh, India by Tahir Mohi-ud-din Rather towards partial fulfillment of a Bachelor of Technology degree in Electronics and Communication Engineering for the 2015-2016 session, with Mr. Rohit Giri as the guiding associate lecturer.
1 first page wpt
This 3-page technical seminar report was submitted by Rameez Raja to Mewar University's Department of Electronics and Communication Engineering in partial fulfillment of the requirements for a Bachelor of Technology degree. The report, guided by Associate Lecturer Mr. Rohit Giri, provides an overview of wireless power transmission technology.
Camera surveilance 1 front pg
This document is a technical seminar report submitted to Mewar University in Chitorgarh, India by Salman Javid towards the partial fulfillment of a Bachelor of Technology degree in Electronics and Communication Engineering. The report, guided by Associate Lecturer Mr. Rohit Giri, focuses on camera surveillance and was submitted in April 2016 to the Department of Electronics and Communication Engineering at Mewar University.
Mwe part 1
This certificate is for a student who completed their bonafide record work in the Microwave Engineering Lab during the third semester of their Bachelor of Technology degree in Electronics and Communication Engineering at CMR Institute of Technology. The certificate details the student's name, hall ticket number, academic year, and is signed by the faculty in charge of the lab and the course coordinator to confirm the student satisfactorily completed the lab work.
Nano technology 0 front
This 3 page seminar report was submitted by Nitika Sharma to Mewar University in partial fulfillment of the requirements for a B.Tech degree. The report, guided by Assistant Professor Rohit Giri, provides an overview of nano technology. It discusses nano technology and its applications in various fields like electronics, energy, and medicine.
NIT Trichy Recruitment 2015-16 Nitt.edu Job Opportunities Apply
job seekers who want to apply for NIT Trichy jobs may get information about essential qualification, age limit, selection process, applying process, salary structure, important dates, etc. from the below section of this page which is well modified by the dedicated team of http://www.recruitmentinboxx.com/nit-trichy-recruitment/5644/
sk me (1)
Shailesh Vishnu Kumbhar is seeking a position that allows him to utilize his skills in electronics and telecommunications. He has a M.E. in electronics from Shah and Anchor Kutchhi Engineering College and a B.E. in electronics and telecommunications from DR. Daulatrao Aher College of Engineering. His work experience includes system and network testing and support as a trainee at Reliance Jio Infocomm. He has published papers on cognitive radio sensor networks and a zigbee-based home patient monitoring system. His interests include sports, music, traveling and reading.
Dth 2certificate
This certificate confirms that Sudhir Kumar Choudhri, with roll number 101305008013, submitted a technical seminar report titled "DHT TECHNOLOGY" to partially fulfill the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report was reviewed by Mr. Rohit Giri and found to meet the prescribed format and be satisfactory. The report was approved for presentation by the head of the Electronics and Communication Engineering department, Ms. Shilpa Jangid.
B.tech admission 2017
Here you can know information about B.Tech Admission 2017.
For More information visit:rupinderkalsi13.blogspot.in
Transcript.PDF
- The document is a transcript of academic records for a student named Mohammad Sadrus Salam from Ahsanullah University of Science and Technology in Dhaka, Bangladesh.
- It lists the courses taken each semester over 8 semesters, the credits and grades earned in each course, culminating in the awarding of a Bachelor of Science degree in Electrical and Electronic Engineering.
- The transcript shows the student's cumulative grade point average (CGPA) was 3.058, above the minimum required for award of the degree.
B.Sc Academic Transcript 2
This document is a transcript from Stamford University Bangladesh that shows the courses and grades for Md. Ziaur Rahman who received a Bachelor of Science in Electrical & Electronic Engineering in spring 2009. It lists 33 courses taken between 2005-2009, the credit hours and grades received for each course. The majority of grades received were A- or higher, with the lowest being a D in English 101. The transcript verifies that Md. Ziaur Rahman completed his degree requirements and was awarded his bachelor's degree.
B.Sc Academic Transcript 01
This document is a transcript for Md. Ziaur Rahman that was issued on May 19, 2013. It shows that he earned a Bachelor of Science in Electrical & Electronic Engineering from Stamford University Bangladesh in the Spring 2009 session. It lists the courses he took, the credits for each course, the letter grade received, and the grade points. The transcript is verified by the Controller of Examinations and includes contact information for the university.
Certificate
This certificate certifies that Harshitha C.M, Lavanya S, Meghadarshini M.H, and Vrishab M.L completed their project entitled "IoT Based Wireless Electronic Notice Board" under the guidance of Mrs. Asha K and Mr. Naveen R C M at GM Institute of Technology in partial fulfillment of the requirements for their Bachelor of Engineering degree in Information Science and Engineering. The project was conducted during the 2016-2017 academic year.
How to Become a Robotics Engineer in 5 Steps What Does a Robotics Engineer Do?
Robo Station is a Multi-Disciplinary Robotics program that has been specially tailored to teach young School and College students on Robotics and trains them to Build, Connect, Program and Innovate Robots at our premises.
Electrical engg. sem vii with project teaching scheme
This document outlines the proposed teaching scheme for the 7th semester of an Electrical Engineering degree program. It lists 6 core subjects totaling 16 credit hours and 1 project course totaling 4 credit hours. It also provides 1 elective subject that can be chosen from 3 advanced topics courses totaling 4 credit hours, for a total of 30 credit hours for the semester.
Civil engineering courses – a complete guidance
Civil Engineering involves planning, designing, constructing, maintaining infrastructure like highways, bridges, buildings, sewage and water treatment facilities. It is a 4-year undergraduate course pursued after 10+2 with subjects like Physics, Maths, English along with Chemistry, Biology or Technical Vocational and minimum 60% marks. The Civil Engineering program at MMDU has highly qualified faculty, latest labs, input from industry professionals, and multidisciplinary curriculum to produce professionals for the 21st century, with job roles like site engineer, construction manager, structural engineer.
Mechanical engineering courses – a complete guidance-MM(DU) Mullana-Ambala
MM(DU) is the one of the leading Engineering College in Haryana which offers courses developed by the most experienced technical experts, teachers, professors and industry leaders. It has trained a large number of brilliant minds and created technical experts in the field of science, IT, technology, engineering, and much more!
Mechanical engineering courses – a complete guidance-MM(DU) Mullana, Ambala
MM(DU) is the one of the leading Engineering College in Haryana which offers courses developed by the most experienced technical experts, teachers, professors and industry leaders. It has trained a large number of brilliant minds and created technical experts in the field of science, IT, technology, engineering, and much more! Young mechanical engineering aspirants from all across the country have shown immense trust in our Department of Mechanical Engineering. This has thus grown to become one of the largest and oldest departments of the MMDU.
Direct to home technology
This document summarizes a seminar on direct-to-home television. It outlines the key components of a DTH system, including the programming source, broadcast center, satellite, satellite dish and receiver. It notes that DTH television delivers over 200 channels to viewers' homes via signals transmitted from satellites. The presentation covers the advantages of DTH such as providing service to remote areas and interactive features, as well as limitations like service disruptions from weather or disturbed dish positioning.
30168069 power-point-presentation-on-direct-to-home-dth
Direct-to-home (DTH) television involves receiving satellite programs directly via a personal dish antenna at home. DTH was first proposed in India in 1996 but was not approved until 2000 due to concerns over security and culture. DTH consists of a broadcasting center, satellites, encoders, multiplexers, modulators and receivers. It allows users to directly access hundreds of channels without cable operators as intermediaries and can provide services even in remote areas.
Silchar paper final
The document provides an overview of bar code technology and its uses and benefits. It discusses how bar codes work by encoding data in varying widths of black and white bars that can be scanned electronically. Bar codes allow for fast, accurate, and efficient data entry. The document outlines common applications of bar codes in retail, warehouses, healthcare, transportation and more. It also discusses the components needed for a bar code system and provides an example of how bar codes have improved operations at a library by streamlining check-in/check-out processes.
DTH
This document discusses direct-to-home (DTH) technology. It describes DTH as involving a broadcasting center, uplink antenna, satellite transponder, mini-dish antenna, and DTH receiver. The main components of a DTH network are the uplink antenna, satellite transponder, mini-dish antenna, and low noise block down converter. A set-top box is then used to demodulate and decode the signal into viewable audio and video. Some advantages of DTH are its cost effectiveness, reliability, and ability to provide thousands of TV and radio channels.
Barcode
This document discusses bar code technology and its applications, specifically in library services. It provides an overview of bar code formats, data entry techniques, benefits such as accuracy and cost efficiency. It also defines bar code terminology and describes different types of bar code scanners. The document outlines various applications of bar codes in areas like inventory control and retail. Finally, it discusses how bar codes can be incorporated in libraries by labeling documents, user cards, and interfacing scanners to track materials and provide benefits like quick and error-free transactions.
Automatic data capture
This document discusses automatic data capture using bar code technology. It defines automatic data capture as inputting data without typing by using bar code readers to scan encoded bar codes. The document describes the basic components of bar codes, including linear and 2D bar codes. It focuses on universal product codes (UPCs), explaining how UPC bar codes work by encoding product information and using a check digit for verification. The benefits of bar codes for accurate and efficient data collection are also summarized.
Nano technology 5 list of figures
This document contains a list of figures for a paper or report on nanotechnology. It includes figures related to smart materials, nanotweezers, nanotubes, nanorods, nanobots, bottom-up and top-down fabrication approaches, and applications of nanotechnology in areas like drugs, fabrics, mobile devices, electronics, computers, and medical technologies like virtual chips and nano surgery. In total, there are 17 figures referenced.
5 g 2 certificate
This certificate certifies that Tahir Mohi-ud-din Rather, with Roll No. 101305008015, submitted his technical seminar report titled "5G TECHNOLOGY" in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report was reviewed and approved by his guide Mr. Rohit Giri and the Head of the Department of Electronics and Communication Engineering Mrs. Shilpa Jangid.
Fpg as 1 first page
This 3 sentence summary provides the key details about the short term training report:
The report describes a short term training on designing an 8 bit ALU using an FPGA that was submitted by Mudasar Sadeeq, a 3rd year BTech ECE student at Mewar University, to his department head Mrs. Shilpa Jangid to fulfill the requirements for his Bachelor of Technology degree in Electronics and Communication Engineering for the 2015-2016 session under the guidance of his professor Mr. Buddhi Prakash Sharma.
2certificate
This certificate confirms that student Rameez Raja, with roll number 101305008011, submitted his technical seminar report titled "WIRELESS POWER TRANSMISSION TECHNOLOGY" in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. Both the student's guide, Mr. Rohit Giri, and the Head of Department, Ms. Shilpa Jangid, approved the report and certified that it satisfies the prescribed format for such reports.
Fpg as 5 contents
This document discusses the implementation of an 8-bit arithmetic logic unit (ALU) using a field programmable gate array (FPGA). Chapter 1 provides an introduction to FPGAs and why they are useful. Chapter 2 describes the FPGA implementation tool Spartan 3. Chapter 3 details the VHDL code and implementation of the 8-bit ALU on the FPGA. Chapter 4 discusses programming and burning the design onto the FPGA. Chapter 5 shows the results of the ALU performing operations like addition, subtraction, and logic functions. Chapter 6 provides a conclusion to the project.
5 g 6 list of figures
This document contains a list of 5 figures related to different generations of mobile networks from 1G to 5G. It provides the page numbers for figures depicting the key technologies and designs of each generation of mobile networks, including their mobile terminals, network layers, functional architectures, and protocols.
More Related Content
What's hot
B.tech admission 2017
Here you can know information about B.Tech Admission 2017.
For More information visit:rupinderkalsi13.blogspot.in
Transcript.PDF
- The document is a transcript of academic records for a student named Mohammad Sadrus Salam from Ahsanullah University of Science and Technology in Dhaka, Bangladesh.
- It lists the courses taken each semester over 8 semesters, the credits and grades earned in each course, culminating in the awarding of a Bachelor of Science degree in Electrical and Electronic Engineering.
- The transcript shows the student's cumulative grade point average (CGPA) was 3.058, above the minimum required for award of the degree.
B.Sc Academic Transcript 2
This document is a transcript from Stamford University Bangladesh that shows the courses and grades for Md. Ziaur Rahman who received a Bachelor of Science in Electrical & Electronic Engineering in spring 2009. It lists 33 courses taken between 2005-2009, the credit hours and grades received for each course. The majority of grades received were A- or higher, with the lowest being a D in English 101. The transcript verifies that Md. Ziaur Rahman completed his degree requirements and was awarded his bachelor's degree.
B.Sc Academic Transcript 01
This document is a transcript for Md. Ziaur Rahman that was issued on May 19, 2013. It shows that he earned a Bachelor of Science in Electrical & Electronic Engineering from Stamford University Bangladesh in the Spring 2009 session. It lists the courses he took, the credits for each course, the letter grade received, and the grade points. The transcript is verified by the Controller of Examinations and includes contact information for the university.
Certificate
This certificate certifies that Harshitha C.M, Lavanya S, Meghadarshini M.H, and Vrishab M.L completed their project entitled "IoT Based Wireless Electronic Notice Board" under the guidance of Mrs. Asha K and Mr. Naveen R C M at GM Institute of Technology in partial fulfillment of the requirements for their Bachelor of Engineering degree in Information Science and Engineering. The project was conducted during the 2016-2017 academic year.
How to Become a Robotics Engineer in 5 Steps What Does a Robotics Engineer Do?
Robo Station is a Multi-Disciplinary Robotics program that has been specially tailored to teach young School and College students on Robotics and trains them to Build, Connect, Program and Innovate Robots at our premises.
Electrical engg. sem vii with project teaching scheme
This document outlines the proposed teaching scheme for the 7th semester of an Electrical Engineering degree program. It lists 6 core subjects totaling 16 credit hours and 1 project course totaling 4 credit hours. It also provides 1 elective subject that can be chosen from 3 advanced topics courses totaling 4 credit hours, for a total of 30 credit hours for the semester.
Civil engineering courses – a complete guidance
Civil Engineering involves planning, designing, constructing, maintaining infrastructure like highways, bridges, buildings, sewage and water treatment facilities. It is a 4-year undergraduate course pursued after 10+2 with subjects like Physics, Maths, English along with Chemistry, Biology or Technical Vocational and minimum 60% marks. The Civil Engineering program at MMDU has highly qualified faculty, latest labs, input from industry professionals, and multidisciplinary curriculum to produce professionals for the 21st century, with job roles like site engineer, construction manager, structural engineer.
Mechanical engineering courses – a complete guidance-MM(DU) Mullana-Ambala
MM(DU) is the one of the leading Engineering College in Haryana which offers courses developed by the most experienced technical experts, teachers, professors and industry leaders. It has trained a large number of brilliant minds and created technical experts in the field of science, IT, technology, engineering, and much more!
Mechanical engineering courses – a complete guidance-MM(DU) Mullana, Ambala
MM(DU) is the one of the leading Engineering College in Haryana which offers courses developed by the most experienced technical experts, teachers, professors and industry leaders. It has trained a large number of brilliant minds and created technical experts in the field of science, IT, technology, engineering, and much more! Young mechanical engineering aspirants from all across the country have shown immense trust in our Department of Mechanical Engineering. This has thus grown to become one of the largest and oldest departments of the MMDU.
What's hot (10)
How to Become a Robotics Engineer in 5 Steps What Does a Robotics Engineer Do?
How to Become a Robotics Engineer in 5 Steps What Does a Robotics Engineer Do?
Electrical engg. sem vii with project teaching scheme
Electrical engg. sem vii with project teaching scheme
Mechanical engineering courses – a complete guidance-MM(DU) Mullana-Ambala
Mechanical engineering courses – a complete guidance-MM(DU) Mullana-Ambala
Mechanical engineering courses – a complete guidance-MM(DU) Mullana, Ambala
Mechanical engineering courses – a complete guidance-MM(DU) Mullana, Ambala
Viewers also liked
Direct to home technology
This document summarizes a seminar on direct-to-home television. It outlines the key components of a DTH system, including the programming source, broadcast center, satellite, satellite dish and receiver. It notes that DTH television delivers over 200 channels to viewers' homes via signals transmitted from satellites. The presentation covers the advantages of DTH such as providing service to remote areas and interactive features, as well as limitations like service disruptions from weather or disturbed dish positioning.
30168069 power-point-presentation-on-direct-to-home-dth
Direct-to-home (DTH) television involves receiving satellite programs directly via a personal dish antenna at home. DTH was first proposed in India in 1996 but was not approved until 2000 due to concerns over security and culture. DTH consists of a broadcasting center, satellites, encoders, multiplexers, modulators and receivers. It allows users to directly access hundreds of channels without cable operators as intermediaries and can provide services even in remote areas.
Silchar paper final
The document provides an overview of bar code technology and its uses and benefits. It discusses how bar codes work by encoding data in varying widths of black and white bars that can be scanned electronically. Bar codes allow for fast, accurate, and efficient data entry. The document outlines common applications of bar codes in retail, warehouses, healthcare, transportation and more. It also discusses the components needed for a bar code system and provides an example of how bar codes have improved operations at a library by streamlining check-in/check-out processes.
DTH
This document discusses direct-to-home (DTH) technology. It describes DTH as involving a broadcasting center, uplink antenna, satellite transponder, mini-dish antenna, and DTH receiver. The main components of a DTH network are the uplink antenna, satellite transponder, mini-dish antenna, and low noise block down converter. A set-top box is then used to demodulate and decode the signal into viewable audio and video. Some advantages of DTH are its cost effectiveness, reliability, and ability to provide thousands of TV and radio channels.
Barcode
This document discusses bar code technology and its applications, specifically in library services. It provides an overview of bar code formats, data entry techniques, benefits such as accuracy and cost efficiency. It also defines bar code terminology and describes different types of bar code scanners. The document outlines various applications of bar codes in areas like inventory control and retail. Finally, it discusses how bar codes can be incorporated in libraries by labeling documents, user cards, and interfacing scanners to track materials and provide benefits like quick and error-free transactions.
Automatic data capture
This document discusses automatic data capture using bar code technology. It defines automatic data capture as inputting data without typing by using bar code readers to scan encoded bar codes. The document describes the basic components of bar codes, including linear and 2D bar codes. It focuses on universal product codes (UPCs), explaining how UPC bar codes work by encoding product information and using a check digit for verification. The benefits of bar codes for accurate and efficient data collection are also summarized.
Nano technology 5 list of figures
This document contains a list of figures for a paper or report on nanotechnology. It includes figures related to smart materials, nanotweezers, nanotubes, nanorods, nanobots, bottom-up and top-down fabrication approaches, and applications of nanotechnology in areas like drugs, fabrics, mobile devices, electronics, computers, and medical technologies like virtual chips and nano surgery. In total, there are 17 figures referenced.
5 g 2 certificate
This certificate certifies that Tahir Mohi-ud-din Rather, with Roll No. 101305008015, submitted his technical seminar report titled "5G TECHNOLOGY" in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report was reviewed and approved by his guide Mr. Rohit Giri and the Head of the Department of Electronics and Communication Engineering Mrs. Shilpa Jangid.
Fpg as 1 first page
This 3 sentence summary provides the key details about the short term training report:
The report describes a short term training on designing an 8 bit ALU using an FPGA that was submitted by Mudasar Sadeeq, a 3rd year BTech ECE student at Mewar University, to his department head Mrs. Shilpa Jangid to fulfill the requirements for his Bachelor of Technology degree in Electronics and Communication Engineering for the 2015-2016 session under the guidance of his professor Mr. Buddhi Prakash Sharma.
2certificate
This certificate confirms that student Rameez Raja, with roll number 101305008011, submitted his technical seminar report titled "WIRELESS POWER TRANSMISSION TECHNOLOGY" in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. Both the student's guide, Mr. Rohit Giri, and the Head of Department, Ms. Shilpa Jangid, approved the report and certified that it satisfies the prescribed format for such reports.
Fpg as 5 contents
This document discusses the implementation of an 8-bit arithmetic logic unit (ALU) using a field programmable gate array (FPGA). Chapter 1 provides an introduction to FPGAs and why they are useful. Chapter 2 describes the FPGA implementation tool Spartan 3. Chapter 3 details the VHDL code and implementation of the 8-bit ALU on the FPGA. Chapter 4 discusses programming and burning the design onto the FPGA. Chapter 5 shows the results of the ALU performing operations like addition, subtraction, and logic functions. Chapter 6 provides a conclusion to the project.
5 g 6 list of figures
This document contains a list of 5 figures related to different generations of mobile networks from 1G to 5G. It provides the page numbers for figures depicting the key technologies and designs of each generation of mobile networks, including their mobile terminals, network layers, functional architectures, and protocols.
Camera surveilance 6 list of figures
This document contains a list of figures and their corresponding page numbers. It includes 9 figures related to a VSAM testbed system, its components like sensors and operator consoles, network architectures for VSAM, packet structures, algorithms for moving target detection from airborne sensors, and examples of an airborne sensor autonomously fixating on and observing multiple target points.
Camera surveilance 3 acknowledgement
The document acknowledges several individuals who provided support and guidance for a project on camera surveillance. It thanks the Chancellor of Mewar University for providing infrastructure, and the guide Rohit Giri for his valuable assistance and continuous support in preparing the seminar report. It also expresses gratitude to the Head of Department Shilpa Jangid and other faculty members for the opportunity to present the seminar.
Fpg as 11 body
An FPGA is described as a reconfigurable integrated circuit containing an array of logic blocks and programmable interconnects. The document discusses an FPGA's architecture, including configurable logic blocks and routing resources. It also provides VHDL code for an 8-bit ALU implementation on an FPGA, including a process to handle data display on an LCD screen.
Camera surveilance 5 contents
This document provides an overview of camera surveillance systems. Chapter 1 introduces definitions of surveillance and public places. Chapter 2 discusses the process of camera surveillance, including collecting personal information, developing surveillance policies, and designing systems. Chapter 3 describes a testbed surveillance system that uses sensor processing units, an operator control unit, and a graphical user interface for communication. Chapter 4 covers video understanding techniques such as moving object detection, object tracking, and airborne surveillance applications. Finally, Chapter 5 discusses the pros and cons of surveillance systems and their security applications.
Nano technology 3 acknowledgement
The student thanks her guide Mr. Rohit Giri for his continuous support and guidance which helped her complete her seminar report. She also thanks all the faculty members of the Electronics And Communication department. The student's name is Nitika Sharma from the Department of Electronics And Communication Engineering with roll number MUR1301582.
Camera surveilance 2certificate
This certificate certifies that Salman Javid, with enrollment number MUR1401380, submitted a technical seminar report titled "CAMERA SURVIVELLANCE" in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report was reviewed by his guide Mr. Rohit Giri and found to meet the prescribed format and be satisfactory. His guide and the Head of Department, Ms. Shilpa Jangid, approved the report for presentation.
Fpg as 3 acknowledgement (2)
Mudasar Sadeeq expresses gratitude to several people for their support and guidance during his short term training. He thanks the Chancellor of Mewar University, Dr. Ashok Kumar Gadhiya, for providing the opportunity to work with companies. He is also grateful to his guide, Mr. Buddhhi Prakash Sharma, for his valuable guidance and support in preparing the training report. Additionally, he thanks his Head of Department, Ms. Shilpa Jangid, for her support and guidance during the short term training.
Nano technology 4 contents
This document discusses nanotechnology, including its definition, properties, tools, approaches, applications, and status in India. Chapter 1 introduces nanotechnology and defines it as technology developed at the nanoscale, between 1 to 100 nanometers. Common tools discussed in Chapter 2 include nanotubes, carbon nanotubes, nanorods, quantum dots, and nanobots. Chapter 3 covers the bottom-up and top-down approaches used in nanotechnology, as well as common materials like nano-composites. Chapter 4 outlines various applications of nanotechnology in areas like drugs and cancer treatment, fabrics, mobile devices, electronics, and computers. The document concludes with a chapter on nanotechnology in India, discussing current possibilities and pitfalls,
Viewers also liked (20)
30168069 power-point-presentation-on-direct-to-home-dth
30168069 power-point-presentation-on-direct-to-home-dth
More from Rameez Raja
Dth 5 contents
This document provides an overview of direct-to-home (DTH) technology. It begins with an introduction to DTH and its history. It then discusses DTH in India, including the major operators and comparisons to cable TV and conditional access systems. The next sections describe the key components of DTH systems, including satellites, broadcast centers, multiplexers, modulators, encoders, antennas, low noise block down converters, and set-top boxes. It then explains the working of DTH through the processes of compression, encryption, transmission and MPEG-2 compression techniques. Later chapters cover an environmental analysis of DTH and its substitutes. The document concludes with a discussion of the advantages and applications of DTH
Dth 4 abstract
DTH is a technology that uses a small dish antenna to transmit digital video channels to home subscribers. It utilizes digital video broadcasting technology to provide high speed internet, voice over internet protocol, and data communication services using a set top box. A return channel is also required via satellite to enable these interactive services. DVB-RCS is an open standard for multimedia satellite networks that allows return data rates of over 2 Mbps using low cost user terminals, while the forward link is usually around 40 Mbps. Today, most satellite TV customers receive digital programming through a direct broadcast satellite provider in a package similar to cable TV, bringing dozens or hundreds of high quality channels to viewers.
Dth 3 acknowledgement
Sudhir Kumar Choudhri expresses gratitude to several individuals who supported his work on a research report about DTH technology. He thanks the Chancellor of Mewar University, Dr. Ashok Kumar Gadhiya, for providing the opportunity to conduct research. He is also grateful to his guide, Mr. Rohit Giri, for his valuable guidance and support in preparing the seminar report. Finally, he acknowledges his Head of Department, Ms. Shilpa Jangid, and other faculty members for allowing him to present his seminar on DTH technology.
Fpg as 9 abstract
This document discusses the construction of an arithmetic logic unit (ALU) using a hardware description language and field programmable gate arrays. Specifically, it simulates and analyzes various parameters of ALUs built using VHDL on the Xilinx ISE 9.2i software and a SPARTAN 3E FPGA board. It also discusses using FPGAs to implement sub-systems for an open-source FPGA-based mobile telephone handset as part of a long-term and complex project. A focus of this project is developing an Ethernet controller and memory mapped I/O interface for an Ethernet PHY.
Fpg as 7 list of figures
This document contains a list of figures for an FPGA project, including figures showing the internal structure of FPGAs, the Spartan 3 FPGA board used, how to connect power and JTAG cables, pin configurations, using impact to program the FPGA, boundary scan, programming and verification processes, and figures demonstrating logic operations like multiplication, addition, subtraction, and, or, nand, nor, xor, xnor and no operation using FPGA logic blocks.
Nano technology 7 smnr report
Nanotechnology involves manipulating matter at the molecular level to build tiny devices and materials with novel properties. It could enable targeted cancer treatment using microscopic robots to detect and destroy cancer cells. Various tools like microscopes and manipulators allow working at the nanoscale. Applications include stronger and lighter materials, drug delivery, stain-resistant fabrics, flexible electronics, and cancer detection chips. While promising benefits, risks include environmental and economic disruption if not properly regulated.
Nano technology 6 abstract
Nanotechnology involves fabricating devices with atomic or molecular precision where features are less than 100 nanometers. At the nanoscale, quantum mechanical effects emerge which could enable revolutionary capabilities. While still in its early stages, nanotechnology is already being used to create non-fogging mirrors, superhydrophobic coatings, gene chips, and fat-soluble vitamins in water. Breakthroughs in computer science and medicine will allow nanotechnology to achieve its full potential. Nanoscience, an interdisciplinary field focusing on the nanoscale, seeks to advance nanotechnology and is rapidly expanding through increased research funding and commercial applications.
Nano technology 2 certificate
This certificate certifies that Nitika Sharma's seminar on "Nano Technology" has been approved to fulfill the degree requirements for a B.Tech in Electronics and Communication Engineering from the Department of Electronics and Communication Engineering at Mewar University in Chittorgarh, Rajasthan, India. The seminar was approved in April 2016 by an internal and external examiner from the university's Faculty of Engineering & Technology.
Nano technology 1 declaration
This document declares that the report titled "Nano Technology" was completed by Nitika Sharma for her B.Tech degree in Electronics and Communication Engineering at Mewar University under the supervision of Mr. Rohit Giri. Nitika declares that the work presented in the report is her own, except where acknowledged, and has not been previously submitted for a degree at another university.
Camera surveilance presentation 150812044730-lva1-app6891
This presentation discusses camera surveillance and CCTV systems. It provides an overview of the purpose of surveillance cameras, which is to monitor areas that need security monitoring. The document outlines the history of CCTV technology and how surveillance cameras work by transmitting video and audio signals. It describes different types of indoor and outdoor cameras and CCTV systems. The uses, advantages, and future of IP-based CCTV are also summarized.
Camera surveilance 7 seminar salman
This document provides guidance for organizations on implementing video surveillance systems in accordance with privacy laws. It discusses factors to consider such as justifying the need for surveillance, minimizing privacy intrusion, developing policies around equipment use and data handling, and consulting stakeholders. Guidelines are provided around designing systems to only collect necessary information for legitimate public safety purposes.
Camera surveilance 4 abstract
This document discusses the design of a surveillance system. It notes that we now live in a surveillance society where cameras monitor our daily lives 24/7. These surveillance systems have become an unremarkable part of everyday life and underpin modern existence. This report aims to provide an understanding of how camera surveillance is integrated into everyday life and how it can help keep people safe in various situations. It will examine the massive surveillance systems that capture people's images hundreds of times per day and underlie contemporary living.
5 g presentation
This document summarizes the evolution of wireless technologies from 1G to 5G. It discusses the key features and limitations of each generation of technology. 1G allowed analog voice calls with speeds up to 2.4 kbps. 2G introduced digital networks and text messaging with speeds up to 64 kbps. 3G enabled broadband connectivity for smartphones and data speeds from 144 kbps to 2 Mbps. 4G provided higher speeds from 100 Mbps to 1 Gbps for video calling and mobile broadband. 5G is expected to offer much higher speeds and capacity for new applications with speeds over 1 Gbps and support for wireless worldwide web. The document compares the technologies and concludes that 5G will provide a reliable wireless solution for the future
5 g 7 tahir saminar
The document provides an overview of the evolution of wireless network technologies from 1G to 5G. It discusses the key characteristics and capabilities of each generation:
- 1G networks were the first analog cellular networks and allowed only voice calling within one country. 2G introduced digital networks and text messaging capabilities.
- 3G networks enabled faster data speeds up to 2 Mbps and services like video calling. 4G aims to provide speeds up to 1 Gbps for multimedia and wireless internet access.
- 5G is envisioned to create a global wireless network with high connectivity speeds of 25 Mbps for advanced applications like integrated personal devices. It aims to overcome limitations of previous generations for a "real wireless world".
5 g 5 page index
The document discusses the evolution of wireless networks from 1G to 5G. It describes each generation including 1G, 2G, 3G, 4G, and the new 5G network. Key aspects of 5G are then outlined such as the views of 5G from industry organizations, the key concepts of 5G, the proposed 5G architecture, hardware and software considerations, features, advantages and applications of 5G technology. Lastly, the document discusses the anticipated effects and impacts of 5G networks on the world.
More from Rameez Raja (15)
Camera surveilance presentation 150812044730-lva1-app6891
Camera surveilance presentation 150812044730-lva1-app6891
Recently uploaded
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaA review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Recently uploaded (20)
2. Operations Strategy in a Global Environment.ppt
2. Operations Strategy in a Global Environment.ppt
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Dth 1 first page dth
- 1. “DTH TECHNOLOGY” A Technical Seminar Report Submitted To Mewar University, Chittorgarh Towards the partial fulfilment of The degree of Bachelor of Technology In Electronics & Communication Engineering Session 2015-2016 Guided By: Submitted By: Mr. Rohit Giri Sudhir Kumar Choudhri Associate Lecturer B.Tech ECE 3rd Yr. Dept. of ECE Roll No:101305008013 Faculty of Engineering & Technology Department of Electronics and Communication Engineering Mewar University Chittorgarh (Raj.) April 2016