Camera surveilance 3 acknowledgement
•Download as DOCX, PDF•
0 likes•83 views
The document acknowledges several individuals who provided support and guidance for a project on camera surveillance. It thanks the Chancellor of Mewar University for providing infrastructure, and the guide Rohit Giri for his valuable assistance and continuous support in preparing the seminar report. It also expresses gratitude to the Head of Department Shilpa Jangid and other faculty members for the opportunity to present the seminar.
Report
Share
Report
Share
Recommended
Dth 3 acknowledgement
Sudhir Kumar Choudhri expresses gratitude to several individuals who supported his work on a research report about DTH technology. He thanks the Chancellor of Mewar University, Dr. Ashok Kumar Gadhiya, for providing the opportunity to conduct research. He is also grateful to his guide, Mr. Rohit Giri, for his valuable guidance and support in preparing the seminar report. Finally, he acknowledges his Head of Department, Ms. Shilpa Jangid, and other faculty members for allowing him to present his seminar on DTH technology.
3 acknowledgement (2)
The document acknowledges the support provided by several individuals in completing a seminar report on wireless power transmission technology. It thanks the Chancellor of Mewar University for providing the opportunity to conduct research. It also expresses gratitude to the guide for their valuable guidance and continuous support in preparing the report. Finally, it thanks the Head of Department and other faculty members for the opportunity to present the seminar.
Acknowledgement
The authors acknowledge and thank their project manager Mr. Divya Kumar and guide Mr. Sougata Ghosh for their guidance and support during the project. They also thank the faculty members including Mr. Puneet Khanna for their help. Finally, they thank their parents and friends for providing suggestions, support and encouragement.
Fpg as 3 acknowledgement (2)
Mudasar Sadeeq expresses gratitude to several people for their support and guidance during his short term training. He thanks the Chancellor of Mewar University, Dr. Ashok Kumar Gadhiya, for providing the opportunity to work with companies. He is also grateful to his guide, Mr. Buddhhi Prakash Sharma, for his valuable guidance and support in preparing the training report. Additionally, he thanks his Head of Department, Ms. Shilpa Jangid, for her support and guidance during the short term training.
Acknowledgement
The document acknowledges and thanks several people who helped in the successful completion of a task. It expresses gratitude to the principal for guiding students, to the head of the computer science department for allowing the topic to be on LEAP MOTION, and especially to the esteemed guide for their keen interest and valuable advice that led to the seminar's successful completion.
Acknowledgement
The student thanks their physics teacher Mr. Anuj Kumar for encouraging and supporting them with facilities to complete their project work. The teacher provided invaluable guidance, constant encouragement, and motivation that sustained the student's efforts at all stages of the project. The student also thanks their principal and parents for making the project possible.
Acknowledgemen nishika
The student thanks her teacher, Mr. Sanjeev Kumar Singh, for his guidance and valuable suggestions that helped her complete her project work. She also expresses gratitude towards her principal, Mr. Geeta Kaushik, and her parents for providing essential support. Additionally, the student feels obliged to her school, Diamond Public Senior Secondary School Bikanpur Moradabad, which has been a source of strength, knowledge, and self-esteem.
Craft cluster document
The document expresses gratitude to various parties who helped in the documentation process about the craft of weaving in Bijepur. This includes the academic institution, authorities from weaving clusters and societies in Bijepur, course coordinators, subject mentors, and weavers who provided details during interviews. Special thanks are given to the weavers who shared information that made the documentation successful.
Recommended
Dth 3 acknowledgement
Sudhir Kumar Choudhri expresses gratitude to several individuals who supported his work on a research report about DTH technology. He thanks the Chancellor of Mewar University, Dr. Ashok Kumar Gadhiya, for providing the opportunity to conduct research. He is also grateful to his guide, Mr. Rohit Giri, for his valuable guidance and support in preparing the seminar report. Finally, he acknowledges his Head of Department, Ms. Shilpa Jangid, and other faculty members for allowing him to present his seminar on DTH technology.
3 acknowledgement (2)
The document acknowledges the support provided by several individuals in completing a seminar report on wireless power transmission technology. It thanks the Chancellor of Mewar University for providing the opportunity to conduct research. It also expresses gratitude to the guide for their valuable guidance and continuous support in preparing the report. Finally, it thanks the Head of Department and other faculty members for the opportunity to present the seminar.
Acknowledgement
The authors acknowledge and thank their project manager Mr. Divya Kumar and guide Mr. Sougata Ghosh for their guidance and support during the project. They also thank the faculty members including Mr. Puneet Khanna for their help. Finally, they thank their parents and friends for providing suggestions, support and encouragement.
Fpg as 3 acknowledgement (2)
Mudasar Sadeeq expresses gratitude to several people for their support and guidance during his short term training. He thanks the Chancellor of Mewar University, Dr. Ashok Kumar Gadhiya, for providing the opportunity to work with companies. He is also grateful to his guide, Mr. Buddhhi Prakash Sharma, for his valuable guidance and support in preparing the training report. Additionally, he thanks his Head of Department, Ms. Shilpa Jangid, for her support and guidance during the short term training.
Acknowledgement
The document acknowledges and thanks several people who helped in the successful completion of a task. It expresses gratitude to the principal for guiding students, to the head of the computer science department for allowing the topic to be on LEAP MOTION, and especially to the esteemed guide for their keen interest and valuable advice that led to the seminar's successful completion.
Acknowledgement
The student thanks their physics teacher Mr. Anuj Kumar for encouraging and supporting them with facilities to complete their project work. The teacher provided invaluable guidance, constant encouragement, and motivation that sustained the student's efforts at all stages of the project. The student also thanks their principal and parents for making the project possible.
Acknowledgemen nishika
The student thanks her teacher, Mr. Sanjeev Kumar Singh, for his guidance and valuable suggestions that helped her complete her project work. She also expresses gratitude towards her principal, Mr. Geeta Kaushik, and her parents for providing essential support. Additionally, the student feels obliged to her school, Diamond Public Senior Secondary School Bikanpur Moradabad, which has been a source of strength, knowledge, and self-esteem.
Craft cluster document
The document expresses gratitude to various parties who helped in the documentation process about the craft of weaving in Bijepur. This includes the academic institution, authorities from weaving clusters and societies in Bijepur, course coordinators, subject mentors, and weavers who provided details during interviews. Special thanks are given to the weavers who shared information that made the documentation successful.
Nano technology 5 list of figures
This document contains a list of figures for a paper or report on nanotechnology. It includes figures related to smart materials, nanotweezers, nanotubes, nanorods, nanobots, bottom-up and top-down fabrication approaches, and applications of nanotechnology in areas like drugs, fabrics, mobile devices, electronics, computers, and medical technologies like virtual chips and nano surgery. In total, there are 17 figures referenced.
Camera surveilance 6 list of figures
This document contains a list of figures and their corresponding page numbers. It includes 9 figures related to a VSAM testbed system, its components like sensors and operator consoles, network architectures for VSAM, packet structures, algorithms for moving target detection from airborne sensors, and examples of an airborne sensor autonomously fixating on and observing multiple target points.
Camera surveilance 5 contents
This document provides an overview of camera surveillance systems. Chapter 1 introduces definitions of surveillance and public places. Chapter 2 discusses the process of camera surveillance, including collecting personal information, developing surveillance policies, and designing systems. Chapter 3 describes a testbed surveillance system that uses sensor processing units, an operator control unit, and a graphical user interface for communication. Chapter 4 covers video understanding techniques such as moving object detection, object tracking, and airborne surveillance applications. Finally, Chapter 5 discusses the pros and cons of surveillance systems and their security applications.
Nano technology 2 certificate
This certificate certifies that Nitika Sharma's seminar on "Nano Technology" has been approved to fulfill the degree requirements for a B.Tech in Electronics and Communication Engineering from the Department of Electronics and Communication Engineering at Mewar University in Chittorgarh, Rajasthan, India. The seminar was approved in April 2016 by an internal and external examiner from the university's Faculty of Engineering & Technology.
Camera surveilance 1 front pg
This document is a technical seminar report submitted to Mewar University in Chitorgarh, India by Salman Javid towards the partial fulfillment of a Bachelor of Technology degree in Electronics and Communication Engineering. The report, guided by Associate Lecturer Mr. Rohit Giri, focuses on camera surveillance and was submitted in April 2016 to the Department of Electronics and Communication Engineering at Mewar University.
Fpg as 11 body
An FPGA is described as a reconfigurable integrated circuit containing an array of logic blocks and programmable interconnects. The document discusses an FPGA's architecture, including configurable logic blocks and routing resources. It also provides VHDL code for an 8-bit ALU implementation on an FPGA, including a process to handle data display on an LCD screen.
Nano technology 3 acknowledgement
The student thanks her guide Mr. Rohit Giri for his continuous support and guidance which helped her complete her seminar report. She also thanks all the faculty members of the Electronics And Communication department. The student's name is Nitika Sharma from the Department of Electronics And Communication Engineering with roll number MUR1301582.
Fpg as 5 contents
This document discusses the implementation of an 8-bit arithmetic logic unit (ALU) using a field programmable gate array (FPGA). Chapter 1 provides an introduction to FPGAs and why they are useful. Chapter 2 describes the FPGA implementation tool Spartan 3. Chapter 3 details the VHDL code and implementation of the 8-bit ALU on the FPGA. Chapter 4 discusses programming and burning the design onto the FPGA. Chapter 5 shows the results of the ALU performing operations like addition, subtraction, and logic functions. Chapter 6 provides a conclusion to the project.
Plc 1 first page plc
This is a short term training report submitted by Rameez Raja Ganaie, a 3rd year B.Tech student in Electronics and Communication Engineering at Mewar University in Chittorgarh, Rajasthan, India. The report was submitted in August 2016 to Mrs. Shilpa Jangid, the Head of the Department of Electronics and Communication Engineering, as partial fulfillment of the requirements for a Bachelor of Technology degree. The topic covered was "PLC SCADA And HMI".
4 abstract
This document proposes wireless power transfer techniques as an alternative to wired power transmission. It describes using resonating inductive coupling over sustainable moderate ranges with 95% efficiency through strongly coupled resonators. Another technique discussed is transferring power over long distances of kilometers using microwaves and rectennas. These wireless techniques could power devices like phones and robots without batteries, eliminating tangled wiring that is currently used.
Camera surveilance 2certificate
This certificate certifies that Salman Javid, with enrollment number MUR1401380, submitted a technical seminar report titled "CAMERA SURVIVELLANCE" in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report was reviewed by his guide Mr. Rohit Giri and found to meet the prescribed format and be satisfactory. His guide and the Head of Department, Ms. Shilpa Jangid, approved the report for presentation.
5 g 5 page index
The document discusses the evolution of wireless networks from 1G to 5G. It describes each generation including 1G, 2G, 3G, 4G, and the new 5G network. Key aspects of 5G are then outlined such as the views of 5G from industry organizations, the key concepts of 5G, the proposed 5G architecture, hardware and software considerations, features, advantages and applications of 5G technology. Lastly, the document discusses the anticipated effects and impacts of 5G networks on the world.
Dth 2certificate
This certificate confirms that Sudhir Kumar Choudhri, with roll number 101305008013, submitted a technical seminar report titled "DHT TECHNOLOGY" to partially fulfill the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report was reviewed by Mr. Rohit Giri and found to meet the prescribed format and be satisfactory. The report was approved for presentation by the head of the Electronics and Communication Engineering department, Ms. Shilpa Jangid.
Dth 4 abstract
DTH is a technology that uses a small dish antenna to transmit digital video channels to home subscribers. It utilizes digital video broadcasting technology to provide high speed internet, voice over internet protocol, and data communication services using a set top box. A return channel is also required via satellite to enable these interactive services. DVB-RCS is an open standard for multimedia satellite networks that allows return data rates of over 2 Mbps using low cost user terminals, while the forward link is usually around 40 Mbps. Today, most satellite TV customers receive digital programming through a direct broadcast satellite provider in a package similar to cable TV, bringing dozens or hundreds of high quality channels to viewers.
Plc 3 acknowledgement plc
The document acknowledges the support received from various individuals during a short term training program. It thanks the Chancellor for providing the opportunity to work with companies. It also expresses gratitude to the technical guide for his valuable guidance and continuous support in preparing the training report. Finally, it thanks the Head of Department for her great support and guidance during the short term training.
1 first page wpt
This 3-page technical seminar report was submitted by Rameez Raja to Mewar University's Department of Electronics and Communication Engineering in partial fulfillment of the requirements for a Bachelor of Technology degree. The report, guided by Associate Lecturer Mr. Rohit Giri, provides an overview of wireless power transmission technology.
Fpg as 1 first page
This 3 sentence summary provides the key details about the short term training report:
The report describes a short term training on designing an 8 bit ALU using an FPGA that was submitted by Mudasar Sadeeq, a 3rd year BTech ECE student at Mewar University, to his department head Mrs. Shilpa Jangid to fulfill the requirements for his Bachelor of Technology degree in Electronics and Communication Engineering for the 2015-2016 session under the guidance of his professor Mr. Buddhi Prakash Sharma.
2certificate
This certificate confirms that student Rameez Raja, with roll number 101305008011, submitted his technical seminar report titled "WIRELESS POWER TRANSMISSION TECHNOLOGY" in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. Both the student's guide, Mr. Rohit Giri, and the Head of Department, Ms. Shilpa Jangid, approved the report and certified that it satisfies the prescribed format for such reports.
5 g 3 acknowledgement
The document acknowledges the support provided by several individuals in completing a seminar report on 5G technology. It thanks the Chancellor of Mewar University for providing the opportunity to conduct research. It also expresses gratitude to the guide for their valuable guidance and continuous support in preparing the report. Finally, it thanks the Head of Department and other faculty members for the opportunity to present the seminar.
5 g 2 certificate
This certificate certifies that Tahir Mohi-ud-din Rather, with Roll No. 101305008015, submitted his technical seminar report titled "5G TECHNOLOGY" in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report was reviewed and approved by his guide Mr. Rohit Giri and the Head of the Department of Electronics and Communication Engineering Mrs. Shilpa Jangid.
Dth 5 contents
This document provides an overview of direct-to-home (DTH) technology. It begins with an introduction to DTH and its history. It then discusses DTH in India, including the major operators and comparisons to cable TV and conditional access systems. The next sections describe the key components of DTH systems, including satellites, broadcast centers, multiplexers, modulators, encoders, antennas, low noise block down converters, and set-top boxes. It then explains the working of DTH through the processes of compression, encryption, transmission and MPEG-2 compression techniques. Later chapters cover an environmental analysis of DTH and its substitutes. The document concludes with a discussion of the advantages and applications of DTH
Dth 1 first page dth
This 3 sentence summary provides the high level information from the technical seminar report submitted to Mewar University, Chittorgarh towards the partial fulfillment of a Bachelor of Technology degree in Electronics and Communication Engineering. The report was guided by Mr. Rohit Giri and submitted by Sudhir Kumar Choudhri, a 3rd year B.Tech student in ECE with a roll number of 101305008013 from the Department of Electronics and Communication Engineering at Mewar University's Faculty of Engineering & Technology. The report was submitted in April 2016.
More Related Content
Viewers also liked
Nano technology 5 list of figures
This document contains a list of figures for a paper or report on nanotechnology. It includes figures related to smart materials, nanotweezers, nanotubes, nanorods, nanobots, bottom-up and top-down fabrication approaches, and applications of nanotechnology in areas like drugs, fabrics, mobile devices, electronics, computers, and medical technologies like virtual chips and nano surgery. In total, there are 17 figures referenced.
Camera surveilance 6 list of figures
This document contains a list of figures and their corresponding page numbers. It includes 9 figures related to a VSAM testbed system, its components like sensors and operator consoles, network architectures for VSAM, packet structures, algorithms for moving target detection from airborne sensors, and examples of an airborne sensor autonomously fixating on and observing multiple target points.
Camera surveilance 5 contents
This document provides an overview of camera surveillance systems. Chapter 1 introduces definitions of surveillance and public places. Chapter 2 discusses the process of camera surveillance, including collecting personal information, developing surveillance policies, and designing systems. Chapter 3 describes a testbed surveillance system that uses sensor processing units, an operator control unit, and a graphical user interface for communication. Chapter 4 covers video understanding techniques such as moving object detection, object tracking, and airborne surveillance applications. Finally, Chapter 5 discusses the pros and cons of surveillance systems and their security applications.
Nano technology 2 certificate
This certificate certifies that Nitika Sharma's seminar on "Nano Technology" has been approved to fulfill the degree requirements for a B.Tech in Electronics and Communication Engineering from the Department of Electronics and Communication Engineering at Mewar University in Chittorgarh, Rajasthan, India. The seminar was approved in April 2016 by an internal and external examiner from the university's Faculty of Engineering & Technology.
Camera surveilance 1 front pg
This document is a technical seminar report submitted to Mewar University in Chitorgarh, India by Salman Javid towards the partial fulfillment of a Bachelor of Technology degree in Electronics and Communication Engineering. The report, guided by Associate Lecturer Mr. Rohit Giri, focuses on camera surveillance and was submitted in April 2016 to the Department of Electronics and Communication Engineering at Mewar University.
Fpg as 11 body
An FPGA is described as a reconfigurable integrated circuit containing an array of logic blocks and programmable interconnects. The document discusses an FPGA's architecture, including configurable logic blocks and routing resources. It also provides VHDL code for an 8-bit ALU implementation on an FPGA, including a process to handle data display on an LCD screen.
Nano technology 3 acknowledgement
The student thanks her guide Mr. Rohit Giri for his continuous support and guidance which helped her complete her seminar report. She also thanks all the faculty members of the Electronics And Communication department. The student's name is Nitika Sharma from the Department of Electronics And Communication Engineering with roll number MUR1301582.
Fpg as 5 contents
This document discusses the implementation of an 8-bit arithmetic logic unit (ALU) using a field programmable gate array (FPGA). Chapter 1 provides an introduction to FPGAs and why they are useful. Chapter 2 describes the FPGA implementation tool Spartan 3. Chapter 3 details the VHDL code and implementation of the 8-bit ALU on the FPGA. Chapter 4 discusses programming and burning the design onto the FPGA. Chapter 5 shows the results of the ALU performing operations like addition, subtraction, and logic functions. Chapter 6 provides a conclusion to the project.
Plc 1 first page plc
This is a short term training report submitted by Rameez Raja Ganaie, a 3rd year B.Tech student in Electronics and Communication Engineering at Mewar University in Chittorgarh, Rajasthan, India. The report was submitted in August 2016 to Mrs. Shilpa Jangid, the Head of the Department of Electronics and Communication Engineering, as partial fulfillment of the requirements for a Bachelor of Technology degree. The topic covered was "PLC SCADA And HMI".
4 abstract
This document proposes wireless power transfer techniques as an alternative to wired power transmission. It describes using resonating inductive coupling over sustainable moderate ranges with 95% efficiency through strongly coupled resonators. Another technique discussed is transferring power over long distances of kilometers using microwaves and rectennas. These wireless techniques could power devices like phones and robots without batteries, eliminating tangled wiring that is currently used.
Camera surveilance 2certificate
This certificate certifies that Salman Javid, with enrollment number MUR1401380, submitted a technical seminar report titled "CAMERA SURVIVELLANCE" in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report was reviewed by his guide Mr. Rohit Giri and found to meet the prescribed format and be satisfactory. His guide and the Head of Department, Ms. Shilpa Jangid, approved the report for presentation.
5 g 5 page index
The document discusses the evolution of wireless networks from 1G to 5G. It describes each generation including 1G, 2G, 3G, 4G, and the new 5G network. Key aspects of 5G are then outlined such as the views of 5G from industry organizations, the key concepts of 5G, the proposed 5G architecture, hardware and software considerations, features, advantages and applications of 5G technology. Lastly, the document discusses the anticipated effects and impacts of 5G networks on the world.
Dth 2certificate
This certificate confirms that Sudhir Kumar Choudhri, with roll number 101305008013, submitted a technical seminar report titled "DHT TECHNOLOGY" to partially fulfill the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report was reviewed by Mr. Rohit Giri and found to meet the prescribed format and be satisfactory. The report was approved for presentation by the head of the Electronics and Communication Engineering department, Ms. Shilpa Jangid.
Dth 4 abstract
DTH is a technology that uses a small dish antenna to transmit digital video channels to home subscribers. It utilizes digital video broadcasting technology to provide high speed internet, voice over internet protocol, and data communication services using a set top box. A return channel is also required via satellite to enable these interactive services. DVB-RCS is an open standard for multimedia satellite networks that allows return data rates of over 2 Mbps using low cost user terminals, while the forward link is usually around 40 Mbps. Today, most satellite TV customers receive digital programming through a direct broadcast satellite provider in a package similar to cable TV, bringing dozens or hundreds of high quality channels to viewers.
Plc 3 acknowledgement plc
The document acknowledges the support received from various individuals during a short term training program. It thanks the Chancellor for providing the opportunity to work with companies. It also expresses gratitude to the technical guide for his valuable guidance and continuous support in preparing the training report. Finally, it thanks the Head of Department for her great support and guidance during the short term training.
1 first page wpt
This 3-page technical seminar report was submitted by Rameez Raja to Mewar University's Department of Electronics and Communication Engineering in partial fulfillment of the requirements for a Bachelor of Technology degree. The report, guided by Associate Lecturer Mr. Rohit Giri, provides an overview of wireless power transmission technology.
Fpg as 1 first page
This 3 sentence summary provides the key details about the short term training report:
The report describes a short term training on designing an 8 bit ALU using an FPGA that was submitted by Mudasar Sadeeq, a 3rd year BTech ECE student at Mewar University, to his department head Mrs. Shilpa Jangid to fulfill the requirements for his Bachelor of Technology degree in Electronics and Communication Engineering for the 2015-2016 session under the guidance of his professor Mr. Buddhi Prakash Sharma.
2certificate
This certificate confirms that student Rameez Raja, with roll number 101305008011, submitted his technical seminar report titled "WIRELESS POWER TRANSMISSION TECHNOLOGY" in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. Both the student's guide, Mr. Rohit Giri, and the Head of Department, Ms. Shilpa Jangid, approved the report and certified that it satisfies the prescribed format for such reports.
5 g 3 acknowledgement
The document acknowledges the support provided by several individuals in completing a seminar report on 5G technology. It thanks the Chancellor of Mewar University for providing the opportunity to conduct research. It also expresses gratitude to the guide for their valuable guidance and continuous support in preparing the report. Finally, it thanks the Head of Department and other faculty members for the opportunity to present the seminar.
5 g 2 certificate
This certificate certifies that Tahir Mohi-ud-din Rather, with Roll No. 101305008015, submitted his technical seminar report titled "5G TECHNOLOGY" in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. The report was reviewed and approved by his guide Mr. Rohit Giri and the Head of the Department of Electronics and Communication Engineering Mrs. Shilpa Jangid.
Viewers also liked (20)
More from Rameez Raja
Dth 5 contents
This document provides an overview of direct-to-home (DTH) technology. It begins with an introduction to DTH and its history. It then discusses DTH in India, including the major operators and comparisons to cable TV and conditional access systems. The next sections describe the key components of DTH systems, including satellites, broadcast centers, multiplexers, modulators, encoders, antennas, low noise block down converters, and set-top boxes. It then explains the working of DTH through the processes of compression, encryption, transmission and MPEG-2 compression techniques. Later chapters cover an environmental analysis of DTH and its substitutes. The document concludes with a discussion of the advantages and applications of DTH
Dth 1 first page dth
This 3 sentence summary provides the high level information from the technical seminar report submitted to Mewar University, Chittorgarh towards the partial fulfillment of a Bachelor of Technology degree in Electronics and Communication Engineering. The report was guided by Mr. Rohit Giri and submitted by Sudhir Kumar Choudhri, a 3rd year B.Tech student in ECE with a roll number of 101305008013 from the Department of Electronics and Communication Engineering at Mewar University's Faculty of Engineering & Technology. The report was submitted in April 2016.
Fpg as 9 abstract
This document discusses the construction of an arithmetic logic unit (ALU) using a hardware description language and field programmable gate arrays. Specifically, it simulates and analyzes various parameters of ALUs built using VHDL on the Xilinx ISE 9.2i software and a SPARTAN 3E FPGA board. It also discusses using FPGAs to implement sub-systems for an open-source FPGA-based mobile telephone handset as part of a long-term and complex project. A focus of this project is developing an Ethernet controller and memory mapped I/O interface for an Ethernet PHY.
Fpg as 7 list of figures
This document contains a list of figures for an FPGA project, including figures showing the internal structure of FPGAs, the Spartan 3 FPGA board used, how to connect power and JTAG cables, pin configurations, using impact to program the FPGA, boundary scan, programming and verification processes, and figures demonstrating logic operations like multiplication, addition, subtraction, and, or, nand, nor, xor, xnor and no operation using FPGA logic blocks.
Nano technology 7 smnr report
Nanotechnology involves manipulating matter at the molecular level to build tiny devices and materials with novel properties. It could enable targeted cancer treatment using microscopic robots to detect and destroy cancer cells. Various tools like microscopes and manipulators allow working at the nanoscale. Applications include stronger and lighter materials, drug delivery, stain-resistant fabrics, flexible electronics, and cancer detection chips. While promising benefits, risks include environmental and economic disruption if not properly regulated.
Nano technology 6 abstract
Nanotechnology involves fabricating devices with atomic or molecular precision where features are less than 100 nanometers. At the nanoscale, quantum mechanical effects emerge which could enable revolutionary capabilities. While still in its early stages, nanotechnology is already being used to create non-fogging mirrors, superhydrophobic coatings, gene chips, and fat-soluble vitamins in water. Breakthroughs in computer science and medicine will allow nanotechnology to achieve its full potential. Nanoscience, an interdisciplinary field focusing on the nanoscale, seeks to advance nanotechnology and is rapidly expanding through increased research funding and commercial applications.
Nano technology 4 contents
This document discusses nanotechnology, including its definition, properties, tools, approaches, applications, and status in India. Chapter 1 introduces nanotechnology and defines it as technology developed at the nanoscale, between 1 to 100 nanometers. Common tools discussed in Chapter 2 include nanotubes, carbon nanotubes, nanorods, quantum dots, and nanobots. Chapter 3 covers the bottom-up and top-down approaches used in nanotechnology, as well as common materials like nano-composites. Chapter 4 outlines various applications of nanotechnology in areas like drugs and cancer treatment, fabrics, mobile devices, electronics, and computers. The document concludes with a chapter on nanotechnology in India, discussing current possibilities and pitfalls,
Nano technology 0 front
This 3 page seminar report was submitted by Nitika Sharma to Mewar University in partial fulfillment of the requirements for a B.Tech degree. The report, guided by Assistant Professor Rohit Giri, provides an overview of nano technology. It discusses nano technology and its applications in various fields like electronics, energy, and medicine.
Nano technology 1 declaration
This document declares that the report titled "Nano Technology" was completed by Nitika Sharma for her B.Tech degree in Electronics and Communication Engineering at Mewar University under the supervision of Mr. Rohit Giri. Nitika declares that the work presented in the report is her own, except where acknowledged, and has not been previously submitted for a degree at another university.
Camera surveilance presentation 150812044730-lva1-app6891
This presentation discusses camera surveillance and CCTV systems. It provides an overview of the purpose of surveillance cameras, which is to monitor areas that need security monitoring. The document outlines the history of CCTV technology and how surveillance cameras work by transmitting video and audio signals. It describes different types of indoor and outdoor cameras and CCTV systems. The uses, advantages, and future of IP-based CCTV are also summarized.
Camera surveilance 7 seminar salman
This document provides guidance for organizations on implementing video surveillance systems in accordance with privacy laws. It discusses factors to consider such as justifying the need for surveillance, minimizing privacy intrusion, developing policies around equipment use and data handling, and consulting stakeholders. Guidelines are provided around designing systems to only collect necessary information for legitimate public safety purposes.
Camera surveilance 4 abstract
This document discusses the design of a surveillance system. It notes that we now live in a surveillance society where cameras monitor our daily lives 24/7. These surveillance systems have become an unremarkable part of everyday life and underpin modern existence. This report aims to provide an understanding of how camera surveillance is integrated into everyday life and how it can help keep people safe in various situations. It will examine the massive surveillance systems that capture people's images hundreds of times per day and underlie contemporary living.
5 g presentation
This document summarizes the evolution of wireless technologies from 1G to 5G. It discusses the key features and limitations of each generation of technology. 1G allowed analog voice calls with speeds up to 2.4 kbps. 2G introduced digital networks and text messaging with speeds up to 64 kbps. 3G enabled broadband connectivity for smartphones and data speeds from 144 kbps to 2 Mbps. 4G provided higher speeds from 100 Mbps to 1 Gbps for video calling and mobile broadband. 5G is expected to offer much higher speeds and capacity for new applications with speeds over 1 Gbps and support for wireless worldwide web. The document compares the technologies and concludes that 5G will provide a reliable wireless solution for the future
5 g 7 tahir saminar
The document provides an overview of the evolution of wireless network technologies from 1G to 5G. It discusses the key characteristics and capabilities of each generation:
- 1G networks were the first analog cellular networks and allowed only voice calling within one country. 2G introduced digital networks and text messaging capabilities.
- 3G networks enabled faster data speeds up to 2 Mbps and services like video calling. 4G aims to provide speeds up to 1 Gbps for multimedia and wireless internet access.
- 5G is envisioned to create a global wireless network with high connectivity speeds of 25 Mbps for advanced applications like integrated personal devices. It aims to overcome limitations of previous generations for a "real wireless world".
5 g 6 list of figures
This document contains a list of 5 figures related to different generations of mobile networks from 1G to 5G. It provides the page numbers for figures depicting the key technologies and designs of each generation of mobile networks, including their mobile terminals, network layers, functional architectures, and protocols.
More from Rameez Raja (15)
Camera surveilance presentation 150812044730-lva1-app6891
Camera surveilance presentation 150812044730-lva1-app6891
Recently uploaded
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Recently uploaded (20)
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
Camera surveilance 3 acknowledgement
- 1. ii ACKNOWLEDGEMENT I am deeply indebted to our Chancellor, Dr. Ashok Kumar Gadiya, Mewar University, Chittorgarh, for providing us the infrastructural facilities to complete our project work. I would like to express my sense of gratitude of my guide Mr. ROHIT GIRI, Assistant Lecturer, for his valuable guidance, suggestion, and continuous support throughout in preparing the seminar report. I also express my thanks to my Head of Department Ms.SHILPA JANGID and other faculty member for providing me an opportunity to present the seminar on “CAMERA SURVIVELLANCE” Date: SALMAN JAVID Enr.No.:-MUR1401380