This document contains a resume for Domiciano L. Bejer, a Filipino mechanical engineer seeking a position in power plant operations. It lists his contact information, education credentials including a master's degree in business management and bachelor's degree in mechanical engineering. It details over 15 years of experience in various engineering roles in Qatar and the Philippines, including over 7 years as a Shift Charge Engineer at Qatar Power Company and 6 years in similar roles at KEPCO Ilijan Corporation in the Philippines. It provides descriptions of his responsibilities and achievements in each role.
The document contains a resume for Nilanjan Das, who is seeking a senior management position. He has over 7 years of experience managing production planning, quality management, and process improvement as Manager of Control Room at Essar Steel Limited's iron ore beneficiation plant in Chhattisgarh, India. His responsibilities include overseeing plant operations, production planning, maintenance coordination, training personnel, and ensuring quality standards are met. He has a Bachelor's degree in Electronics and Telecommunication Engineering and additional vocational and management training.
The document is a 3-page curriculum vitae for Karlo Berania Reyes that outlines his personal and contact details, work experience, education, trainings, and references. It details his experience as a Commissioning Engineer and Shift Charge Engineer on various power plant projects in Russia, India, and Singapore. It also outlines his experience operating and maintaining combined cycle power plants in Saudi Arabia, the Philippines, and Malaysia.
LOOKING FOR NEW CHALLENGES,
I would like to apply for a position as MEP, facilities manager/Engineer, or other position vacancies in the engineering department in your company. I have been working in UAE 10 years with IBN Battuta Mall, Adnoc Technical Institute and with Legend Middle East LLC. All total experience 10 years. I am now looking for further opportunities.
Nathaniel Bong is seeking a new challenging mechanical engineering position. He has over 4 years of experience as a senior control engineer and plant equipment operator in power generation. His skills include operating and maintaining boiler, turbine, and auxiliary equipment, performing inspections, troubleshooting issues, and ensuring safe and reliable plant operations. He is proficient in safety procedures and maintenance management software.
Nazarrudin Somad has over 20 years of experience in maintenance planning and inventory management for oil and gas facilities in Qatar and Indonesia. He currently works as an Inventory Senior Planner at QAPCO in Qatar, where he is responsible for procurement, inventory analysis, and master data management. Previously, he held roles as a Mechanical Maintenance Planner and Technician in Qatar and Indonesia, where he gained experience planning maintenance activities, managing contractors, and supporting plant shutdowns and overhauls. He holds a Diploma in Mechanical Engineering and a Bachelor's degree in Mechanical Engineering.
- The document contains contact and professional details for Amanulla Fayaz Ahmed Valangar, including over 23 years of experience as an operator monitoring and controlling sewage treatment plants in Qatar and Saudi Arabia. Some of his responsibilities include ensuring treated sewage meets quality standards, managing safety procedures, and handling emergency situations. He has qualifications in mechanical engineering and various technical certifications.
This document is a resume for Jack E. Allmendinger Jr. that summarizes his experience as a Senior Utilities Mechanical Technician with extensive experience operating, maintaining, and repairing boilers, turbines, chillers and other equipment. Some of his accomplishments include doubling steam production capacity at a plant and reducing operating costs through efficient operations. He is currently a Utility Plant Operator at Grifols Therapeutics where he operates boiler, compressor and waste water equipment.
Tejinder has over 10 years of experience as a boiler operator and maintenance technician. He holds a 4th Class Power Engineering Certificate from SAIT Polytechnic as well as certification in Gas Process Operations. Tejinder is skilled in operating and maintaining boilers, pumps, compressors and refrigeration systems. He aims to obtain a position utilizing his experience and education.
The document contains a resume for Nilanjan Das, who is seeking a senior management position. He has over 7 years of experience managing production planning, quality management, and process improvement as Manager of Control Room at Essar Steel Limited's iron ore beneficiation plant in Chhattisgarh, India. His responsibilities include overseeing plant operations, production planning, maintenance coordination, training personnel, and ensuring quality standards are met. He has a Bachelor's degree in Electronics and Telecommunication Engineering and additional vocational and management training.
The document is a 3-page curriculum vitae for Karlo Berania Reyes that outlines his personal and contact details, work experience, education, trainings, and references. It details his experience as a Commissioning Engineer and Shift Charge Engineer on various power plant projects in Russia, India, and Singapore. It also outlines his experience operating and maintaining combined cycle power plants in Saudi Arabia, the Philippines, and Malaysia.
LOOKING FOR NEW CHALLENGES,
I would like to apply for a position as MEP, facilities manager/Engineer, or other position vacancies in the engineering department in your company. I have been working in UAE 10 years with IBN Battuta Mall, Adnoc Technical Institute and with Legend Middle East LLC. All total experience 10 years. I am now looking for further opportunities.
Nathaniel Bong is seeking a new challenging mechanical engineering position. He has over 4 years of experience as a senior control engineer and plant equipment operator in power generation. His skills include operating and maintaining boiler, turbine, and auxiliary equipment, performing inspections, troubleshooting issues, and ensuring safe and reliable plant operations. He is proficient in safety procedures and maintenance management software.
Nazarrudin Somad has over 20 years of experience in maintenance planning and inventory management for oil and gas facilities in Qatar and Indonesia. He currently works as an Inventory Senior Planner at QAPCO in Qatar, where he is responsible for procurement, inventory analysis, and master data management. Previously, he held roles as a Mechanical Maintenance Planner and Technician in Qatar and Indonesia, where he gained experience planning maintenance activities, managing contractors, and supporting plant shutdowns and overhauls. He holds a Diploma in Mechanical Engineering and a Bachelor's degree in Mechanical Engineering.
- The document contains contact and professional details for Amanulla Fayaz Ahmed Valangar, including over 23 years of experience as an operator monitoring and controlling sewage treatment plants in Qatar and Saudi Arabia. Some of his responsibilities include ensuring treated sewage meets quality standards, managing safety procedures, and handling emergency situations. He has qualifications in mechanical engineering and various technical certifications.
This document is a resume for Jack E. Allmendinger Jr. that summarizes his experience as a Senior Utilities Mechanical Technician with extensive experience operating, maintaining, and repairing boilers, turbines, chillers and other equipment. Some of his accomplishments include doubling steam production capacity at a plant and reducing operating costs through efficient operations. He is currently a Utility Plant Operator at Grifols Therapeutics where he operates boiler, compressor and waste water equipment.
Tejinder has over 10 years of experience as a boiler operator and maintenance technician. He holds a 4th Class Power Engineering Certificate from SAIT Polytechnic as well as certification in Gas Process Operations. Tejinder is skilled in operating and maintaining boilers, pumps, compressors and refrigeration systems. He aims to obtain a position utilizing his experience and education.
Instrumentation engineer having 8+ years of exp. in Allen-Bradley PLCs like ControlLogix5000, PLC5/40E, SLC5/04 and DCS YOKOGAWA CENTUM CS3000 & various Field instruments
Anam Bastari is a senior operator at PUSRI, a large fertilizer company in Indonesia, seeking a new challenging position utilizing over 8 years of experience operating utilities equipment including gas turbines, boilers, electrical systems, and water treatment plants. He has a bachelor's degree in civil engineering and various safety and operations certifications.
Hardik Chauhan is an instrumentation engineer with over 7 years of experience in maintenance roles at companies like Apollo Tyres Ltd and Hindalco Industries Ltd. He has expertise in preventative maintenance, predictive maintenance, systems like DCS, PLCs, and field instruments. The resume provides details of his work experience, qualifications, skills, and achievements in instrumentation engineering.
Kamalesh Krishnan has over 15 years of experience working in petrochemical and gas processing industries in India and Saudi Arabia. He currently works as a Lead Process Operator for Saudi International Petrochemical Company in Saudi Arabia, overseeing butane, maleic unhydraide, and butane diol plants. Previously he worked for Chemplast Sanmar in India as a Process Operator and for Thirumalai Chemicals as a Plant Operator. He has extensive experience operating DCS systems like Emerson Delta-V and processes involving distillation columns, reactors, compressors and other equipment. He is trained in safety procedures like issuing work permits and hazardous material handling.
David Camarena has over 2 years of experience as a Water Treatment Operator and is seeking a new position. He has a proven track record of being punctual, reliable, and maintaining a safe and organized work environment. He was recognized by his previous employer for being friendly, personable, and exemplifying company spirit. He is licensed as a Grade 2 water treatment operator and has handled chemicals, operated equipment, and ensured regulatory compliance during his career.
M. Bala Murali Krishna is applying for a senior position requiring experience in operations, maintenance, and project management in the power plant industry. He has over 13 years of experience managing various aspects of power plant projects including erection, operation, maintenance of boilers and turbines, commissioning of equipment, quality control, and safety management. His resume outlines his work history at several companies where he has taken on roles with increasing responsibility such as deputy manager and shift in charge. He believes his qualifications and proven track record make him a strong candidate for the open position.
Jagannath Adki is a mechanical engineer with over 7 years of experience in project operations, installation, commissioning, operation and maintenance at a cement plant. He is currently the Deputy Manager (Mechanical) at Vasavadatta Cement Sedam in Karnataka. He has skills in planning and managing maintenance activities to reduce downtime and enhance equipment effectiveness. Adki is also experienced in managing projects involving equipment erection, commissioning and maintenance.
Senguttavan Shanmugam has over 23 years of experience in refinery operations including as a shift supervisor. He currently works as a Shift Supervisor at Yanbu Aramco Sinopec Refinery in Saudi Arabia where he oversees the operation of various units. Previously he has worked for several refineries in India, holding roles such as Shift Supervisor and Console Operator. He has expertise in commissioning and operating various refinery units including CDUs, hydrotreaters, and sulfur recovery units.
Atul Modi is a senior managerial professional with over 25 years of experience in operations, maintenance, and project management in the pharmaceutical industry. He has expertise in managing utilities, electrical systems, instrumentation, and other facilities. Currently serving as General Manager of Engineering at Hospira Healthcare India Pvt. Ltd., his responsibilities include overseeing the maintenance department and ensuring timely project completion. Previously, he held senior leadership roles at several pharmaceutical companies where he successfully executed multiple brownfield projects worth over $100 million and implemented cost-saving initiatives.
Steven Sleeper is an experienced Shift Supervisor with over 30 years of experience in waste-to-energy plant operations and maintenance. He currently works as a Shift Supervisor at Wheelabrator North Broward in Pompano Beach, FL, where he supervises plant personnel and ensures proper and efficient plant output. Sleeper has extensive skills in safety, leadership, team building, and waste-to-energy systems. He is ASME QRO Provisional and ASME Shift Supervisor Site Specific certified.
Fredric Evans has over 20 years of experience in manufacturing management and supervision, including positions as a Production Supervisor, Industrial Engineer, Quality Engineer, and Production Supervisor. He has hands-on experience in textiles, food processing, and quality assurance. Evans holds a Bachelor's degree in Industrial Engineering and served 15 years in the US Army Reserves, achieving the rank of Major.
Surya Mohan Perumalla is an electrical engineer seeking a position in operations and maintenance with 18 years of experience. He has worked for several renewable energy companies in management roles overseeing the maintenance of wind turbines and electrical equipment. Perumalla has expertise in electrical installation, commissioning, testing, and troubleshooting, as well as managing maintenance budgets and personnel.
Gerald Chaytors has over 30 years of experience in industrial plant maintenance and safety. He has worked as a millwright, supervisor, and predictive maintenance foreman at cement and oil/gas plants. Some of his responsibilities have included implementing vibration analysis and lubrication programs, supervising maintenance crews, and ensuring safety standards are met. He is currently working shutdown jobs through various contracting companies and looking for new opportunities in plant maintenance and safety.
This document provides a summary of Surya Mohan Perumalla's work experience and qualifications. He has over 18 years of experience in electrical machinery erection, commissioning, testing, operations and maintenance. Currently he works as a Senior Manager of Operations and Maintenance at Greenko Group. Previous roles include Deputy Manager of Operations and Maintenance at Vestas Wind Technology India and Assistant Manager of Operations and Maintenance at Suzlon Infrastructure Services.
This document contains a summary of Rajeev Sharma's professional experience and qualifications. He has over 22 years of experience in project management, maintenance, and manufacturing. Currently he works as the Maintenance Head at SKF India Ltd in Hardwar, where he leads maintenance operations and energy management initiatives. Previously he has held roles such as Service Manager and Head of Maintenance at other companies. His expertise includes project management, maintenance, manufacturing, and energy efficiency.
I have more than 22 years of extensive experience in HVAC and Refrigeration, Facilities, Split A/C, Supermarket (Rack system) Refrigeration, Refrigerated containers (Reefer), Cold store/rooms, MEP, BMS, VRV Systems, Plumbing, Welding, Electrical, Home and kitchen Appliances installation, maintenance and troubleshooting works.
Ricky Nelson has over 12 years of experience as a board operator and supervisor at oil refineries in Aruba and Suriname. He has expertise operating and supervising units like hydrogen plants, asphalt units, and distillation columns. Currently he works as the Refinery Shift Superintendent at Staatsolie Refinery in Suriname, overseeing all operations.
This curricular vitae provides a summary of Azaman Bin Sukor's professional experience over 30 years working in the petrochemical industry in Saudi Arabia, Sudan, and Malaysia. It details his most recent role as an Operation Day Foreman at Sadara Chemical Company in Saudi Arabia since 2014, as well as previous positions as a Shift Supervisor, Senior Production Executive, and Operation Foreman at other companies. Safety and process optimization were key responsibilities in these roles. The CV also lists Azaman's education qualifications and extensive training courses attended related to operations, safety, and management.
This document is a resume for Agha Muhammad Shuaib, a professional instrument and control engineer with 9 years of experience working for WAPDA and PEPCO in Pakistan. It lists his contact information, objective of seeking a progressive and challenging environment, experience including roles as a junior engineer and shift incharge, skills and training, and education information.
This document contains the resume of Avinash B, an automation engineer with over 6 years of experience in power plant maintenance, commissioning, and operations. He has spearheaded installation, calibration, and maintenance of various instrumentation systems like gas analyzers, weather monitoring systems, and DCS. He is proficient in PLCs, process instrumentation, and has experience working with control systems from manufacturers like Foxboro, Allen Bradley, and Schneider. His career includes roles supporting aircraft simulators, process plants, and serving as a senior engineer at a gas analyzer company. He holds a diploma in electronics and has attended various technical trainings.
Marlowe M. Salenga is applying for an Assistant Instrumentation Engineer position. He has 8 years of experience working in instrumentation for oil, gas and petrochemical plants. He is certified in instrumentation and has experience working with common instrumentation brands. He has worked as an Instrumentation Technician for Maersk Oil Qatar and an Electrical and Instrumentation Supervisor for a steel plant construction in Saudi Arabia. He is proficient in maintenance, calibration, commissioning and installation of instrumentation systems.
This document provides biographical information about Chris Clement, including his name, age, nationality, address, contact information, employment history, education, and qualifications. Chris Clement is a 53-year-old British national who has over 16 years of experience in the operation and maintenance of seawater reverse osmosis and water treatment systems. He currently works as a senior consultant for Fichtner Consulting Engineers in Qatar, where he ensures correct process commissioning practices.
Instrumentation engineer having 8+ years of exp. in Allen-Bradley PLCs like ControlLogix5000, PLC5/40E, SLC5/04 and DCS YOKOGAWA CENTUM CS3000 & various Field instruments
Anam Bastari is a senior operator at PUSRI, a large fertilizer company in Indonesia, seeking a new challenging position utilizing over 8 years of experience operating utilities equipment including gas turbines, boilers, electrical systems, and water treatment plants. He has a bachelor's degree in civil engineering and various safety and operations certifications.
Hardik Chauhan is an instrumentation engineer with over 7 years of experience in maintenance roles at companies like Apollo Tyres Ltd and Hindalco Industries Ltd. He has expertise in preventative maintenance, predictive maintenance, systems like DCS, PLCs, and field instruments. The resume provides details of his work experience, qualifications, skills, and achievements in instrumentation engineering.
Kamalesh Krishnan has over 15 years of experience working in petrochemical and gas processing industries in India and Saudi Arabia. He currently works as a Lead Process Operator for Saudi International Petrochemical Company in Saudi Arabia, overseeing butane, maleic unhydraide, and butane diol plants. Previously he worked for Chemplast Sanmar in India as a Process Operator and for Thirumalai Chemicals as a Plant Operator. He has extensive experience operating DCS systems like Emerson Delta-V and processes involving distillation columns, reactors, compressors and other equipment. He is trained in safety procedures like issuing work permits and hazardous material handling.
David Camarena has over 2 years of experience as a Water Treatment Operator and is seeking a new position. He has a proven track record of being punctual, reliable, and maintaining a safe and organized work environment. He was recognized by his previous employer for being friendly, personable, and exemplifying company spirit. He is licensed as a Grade 2 water treatment operator and has handled chemicals, operated equipment, and ensured regulatory compliance during his career.
M. Bala Murali Krishna is applying for a senior position requiring experience in operations, maintenance, and project management in the power plant industry. He has over 13 years of experience managing various aspects of power plant projects including erection, operation, maintenance of boilers and turbines, commissioning of equipment, quality control, and safety management. His resume outlines his work history at several companies where he has taken on roles with increasing responsibility such as deputy manager and shift in charge. He believes his qualifications and proven track record make him a strong candidate for the open position.
Jagannath Adki is a mechanical engineer with over 7 years of experience in project operations, installation, commissioning, operation and maintenance at a cement plant. He is currently the Deputy Manager (Mechanical) at Vasavadatta Cement Sedam in Karnataka. He has skills in planning and managing maintenance activities to reduce downtime and enhance equipment effectiveness. Adki is also experienced in managing projects involving equipment erection, commissioning and maintenance.
Senguttavan Shanmugam has over 23 years of experience in refinery operations including as a shift supervisor. He currently works as a Shift Supervisor at Yanbu Aramco Sinopec Refinery in Saudi Arabia where he oversees the operation of various units. Previously he has worked for several refineries in India, holding roles such as Shift Supervisor and Console Operator. He has expertise in commissioning and operating various refinery units including CDUs, hydrotreaters, and sulfur recovery units.
Atul Modi is a senior managerial professional with over 25 years of experience in operations, maintenance, and project management in the pharmaceutical industry. He has expertise in managing utilities, electrical systems, instrumentation, and other facilities. Currently serving as General Manager of Engineering at Hospira Healthcare India Pvt. Ltd., his responsibilities include overseeing the maintenance department and ensuring timely project completion. Previously, he held senior leadership roles at several pharmaceutical companies where he successfully executed multiple brownfield projects worth over $100 million and implemented cost-saving initiatives.
Steven Sleeper is an experienced Shift Supervisor with over 30 years of experience in waste-to-energy plant operations and maintenance. He currently works as a Shift Supervisor at Wheelabrator North Broward in Pompano Beach, FL, where he supervises plant personnel and ensures proper and efficient plant output. Sleeper has extensive skills in safety, leadership, team building, and waste-to-energy systems. He is ASME QRO Provisional and ASME Shift Supervisor Site Specific certified.
Fredric Evans has over 20 years of experience in manufacturing management and supervision, including positions as a Production Supervisor, Industrial Engineer, Quality Engineer, and Production Supervisor. He has hands-on experience in textiles, food processing, and quality assurance. Evans holds a Bachelor's degree in Industrial Engineering and served 15 years in the US Army Reserves, achieving the rank of Major.
Surya Mohan Perumalla is an electrical engineer seeking a position in operations and maintenance with 18 years of experience. He has worked for several renewable energy companies in management roles overseeing the maintenance of wind turbines and electrical equipment. Perumalla has expertise in electrical installation, commissioning, testing, and troubleshooting, as well as managing maintenance budgets and personnel.
Gerald Chaytors has over 30 years of experience in industrial plant maintenance and safety. He has worked as a millwright, supervisor, and predictive maintenance foreman at cement and oil/gas plants. Some of his responsibilities have included implementing vibration analysis and lubrication programs, supervising maintenance crews, and ensuring safety standards are met. He is currently working shutdown jobs through various contracting companies and looking for new opportunities in plant maintenance and safety.
This document provides a summary of Surya Mohan Perumalla's work experience and qualifications. He has over 18 years of experience in electrical machinery erection, commissioning, testing, operations and maintenance. Currently he works as a Senior Manager of Operations and Maintenance at Greenko Group. Previous roles include Deputy Manager of Operations and Maintenance at Vestas Wind Technology India and Assistant Manager of Operations and Maintenance at Suzlon Infrastructure Services.
This document contains a summary of Rajeev Sharma's professional experience and qualifications. He has over 22 years of experience in project management, maintenance, and manufacturing. Currently he works as the Maintenance Head at SKF India Ltd in Hardwar, where he leads maintenance operations and energy management initiatives. Previously he has held roles such as Service Manager and Head of Maintenance at other companies. His expertise includes project management, maintenance, manufacturing, and energy efficiency.
I have more than 22 years of extensive experience in HVAC and Refrigeration, Facilities, Split A/C, Supermarket (Rack system) Refrigeration, Refrigerated containers (Reefer), Cold store/rooms, MEP, BMS, VRV Systems, Plumbing, Welding, Electrical, Home and kitchen Appliances installation, maintenance and troubleshooting works.
Ricky Nelson has over 12 years of experience as a board operator and supervisor at oil refineries in Aruba and Suriname. He has expertise operating and supervising units like hydrogen plants, asphalt units, and distillation columns. Currently he works as the Refinery Shift Superintendent at Staatsolie Refinery in Suriname, overseeing all operations.
This curricular vitae provides a summary of Azaman Bin Sukor's professional experience over 30 years working in the petrochemical industry in Saudi Arabia, Sudan, and Malaysia. It details his most recent role as an Operation Day Foreman at Sadara Chemical Company in Saudi Arabia since 2014, as well as previous positions as a Shift Supervisor, Senior Production Executive, and Operation Foreman at other companies. Safety and process optimization were key responsibilities in these roles. The CV also lists Azaman's education qualifications and extensive training courses attended related to operations, safety, and management.
This document is a resume for Agha Muhammad Shuaib, a professional instrument and control engineer with 9 years of experience working for WAPDA and PEPCO in Pakistan. It lists his contact information, objective of seeking a progressive and challenging environment, experience including roles as a junior engineer and shift incharge, skills and training, and education information.
This document contains the resume of Avinash B, an automation engineer with over 6 years of experience in power plant maintenance, commissioning, and operations. He has spearheaded installation, calibration, and maintenance of various instrumentation systems like gas analyzers, weather monitoring systems, and DCS. He is proficient in PLCs, process instrumentation, and has experience working with control systems from manufacturers like Foxboro, Allen Bradley, and Schneider. His career includes roles supporting aircraft simulators, process plants, and serving as a senior engineer at a gas analyzer company. He holds a diploma in electronics and has attended various technical trainings.
Marlowe M. Salenga is applying for an Assistant Instrumentation Engineer position. He has 8 years of experience working in instrumentation for oil, gas and petrochemical plants. He is certified in instrumentation and has experience working with common instrumentation brands. He has worked as an Instrumentation Technician for Maersk Oil Qatar and an Electrical and Instrumentation Supervisor for a steel plant construction in Saudi Arabia. He is proficient in maintenance, calibration, commissioning and installation of instrumentation systems.
This document provides biographical information about Chris Clement, including his name, age, nationality, address, contact information, employment history, education, and qualifications. Chris Clement is a 53-year-old British national who has over 16 years of experience in the operation and maintenance of seawater reverse osmosis and water treatment systems. He currently works as a senior consultant for Fichtner Consulting Engineers in Qatar, where he ensures correct process commissioning practices.
Seeking a challenging career in dynamic & leading organization preferably a large-scale Chemical-Petrochemical\ Fertilizers\ Petroleum Refinery or Oil and Gas that would help me cultivate and nature my skills to the fullest with an opportunity to display my talent and become an asset to any medium\ large national or multinational organization. 11.5 years work experience in utilities & process operation Area in petrochemical, chemical and power.
Shahimulk has 4 years of experience as a Team Lead for Maintenance working on instrumentation and control systems at Attock Refinery Limited in Pakistan. Some of the key tasks he has led include overhauling vibration monitoring systems, maintaining compressors and their instruments, developing SOPs for oxygen analyzers, and installing and calibrating various pressure, flow, temperature and other sensors. He has extensive safety and technical training from companies like Honeywell, Emerson and Siemens. He is willing to accept the offered salary of AED5000+600 plus standard benefits for a Maintenance Officer role in the UAE.
CV Oil and Gas Field Operator Nishanth P JoyNISHANTH JOY
Nishanth P Joy has over 11 years of experience in oil and gas operations, commissioning, and maintenance in the Middle East. He has expertise in plant operations, start-up, troubleshooting, shutdown operations, and equipment maintenance. His skills include communications, safety procedures, testing and inspection. He held roles as a wellhead operator, production operator, and field operator for companies in UAE, Qatar, Saudi Arabia, and Bahrain. He is seeking a position utilizing his strong technical and organizational skills to work in the hydrocarbon process industry.
Tahir Saleem provides his contact information and summarizes his 12 years of experience in maintenance management, industrial automation, project management, and problem solving. He lists his expertise areas and outlines his professional experience managing maintenance as Deputy Manager at Al-Tuwairqi Group and his previous roles as Electronics Engineer and Maintenance Engineer. Tahir Saleem also includes his education background and references.
The document provides a summary of Shahbaz Qasim's career experience and qualifications. It summarizes his 20 years of experience in instrument and control technician roles in oil, gas and petrochemical plants in the UAE and Pakistan. It also lists his educational qualification of a diploma in electronics technology. The document is Shahbaz Qasim's application for an instrument and control technician/foreman/supervisor/trainer role where he outlines his responsibilities and experience in detail.
The document is a resume for a candidate seeking a position in operations and maintenance. It summarizes their 15+ years of experience in managing repair facilities and projects for power equipment like gas turbines, generators, and steam turbines. Their most recent role is as Repair Manager at GE Power Services in Saudi Arabia, where they oversee repairs and manage projects.
Pushpendra Singh is an electrical and electronics engineer with 3 years of experience working for Wind World India Ltd. He has experience operating and maintaining 216 MW of wind farms with 270 wind turbines. He currently works as an engineer overseeing operations and maintenance. He is skilled at troubleshooting issues, leading teams, and ensuring safety standards are followed. He has experience commissioning new projects and improving performance and maintenance processes.
Kenny Alberto is a mechanical engineer and power plant operator seeking a new work opportunity. He has over 7 years of experience in power plant operation and maintenance, mechanical maintenance, and equipment repair. His experience includes operating coal-fired power plants, maintaining generators and engines, and designing maintenance strategies. He is goal-oriented, a strong communicator, and holds degrees in Mechanical and Chemical Engineering.
Samantha Nelson is seeking a position that allows career development through safety-focused team problem solving and continuous improvement. She has over 15 years of experience in power plant maintenance and operations management with a proven track record of safety and project leadership. Nelson holds an AA in Business and will complete her BS in Business Administration in 2016 from the University of Phoenix.
C.P. Johny is a mechanical engineer with over 21 years of experience in power plant operations and maintenance. He currently serves as General Manager of a 150 MW gas-fired power plant in Tamil Nadu, where he oversees daily operations, maintenance activities, regulatory compliance, and performance optimization. Previously, he held leadership roles with several companies, managing projects from inception to commissioning and contributing to capacity expansions. Johny has comprehensive expertise in power generation, process improvement, EHS compliance, and developing professionally managed plant operations.
This document contains the resume of Irshad Ahmed, a chemical engineer from Pakistan with over 23 years of experience in chemical process operations and maintenance engineering. It details his work history managing utilities plants for various companies, and lists his responsibilities overseeing operations, maintenance, and safety. It also provides his education credentials and contact information.
The document is a curriculum vitae for Dipongkar Saha. It includes his personal details, objectives, duties and responsibilities, work experience as an engineer for various power plants in Bangladesh and Singapore, qualifications including a bachelor's degree in electrical engineering, and additional training. His experience spans over 15 years in operations and maintenance roles for power generation facilities.
Mohammad Nadeem Qureshi is a Pakistani national with over 18 years of experience in commissioning and operations of refineries, fertilizer plants, utilities, and power plants. He has a bachelor's degree in chemical engineering and additional professional qualifications. Nadeem is currently a DCS Senior Operator/Acting Supervisor at Takreer Refinery in Abu Dhabi, where he supervises plant operations and ensures safety and quality standards are followed. Prior to this, he gained extensive commissioning experience with PARCO and training from National Refinery Limited. Nadeem seeks to utilize his skills and experience in a company that values career growth and development.
This document contains a resume for Parthasarathy Viswanathan, an Electrical Specialist Engineer with over 2 decades of experience in operations, maintenance, project management, and team leadership. He is currently employed at SABIC-KEMYA in Saudi Arabia, where he provides technical support and oversees maintenance of electrical equipment. His previous experience includes roles as Maintenance Manager and Assistant Manager of Projects & Energy at Tamilnadu Petroproducts Limited in India.
This document provides a summary of an electrical engineer's professional profile. It includes contact information, objective, qualifications, and work experience. Specifically:
- The engineer has over 4 years of experience in cement and power plants and seeks a result-oriented position utilizing their skills.
- Educational qualifications include a Bachelor's in Electrical Engineering, diploma in Industrial Safety, and diploma in Electrical Engineering.
- Recent work experience was as an Electrical Engineer and Safety Officer at a cement company in Saudi Arabia, and previously as a Junior Engineer at a cement plant in India, where safety responsibilities included training, inspections, and reporting.
Joseph Appiah Kodom Effah is an Electrical/Control and Instrumentation Engineer with over 17 years of experience in project management and operations in Ghana. He has held several managerial roles overseeing engineering, process control, energy management, and maintenance functions. Currently he is the Engineering Manager at AngloGold Ashanti, where he develops standards and procedures to improve engineering efficiency and identifies opportunities for improvement.
Hilario C. Dicag is applying for a position as a Senior Rotating Equipment Technician. He has over 22 years of experience as a mechanical technician working on rotating equipment like compressors, pumps, and turbines in oil, gas, and power industries. His resume lists his employment history including his most recent role as a Senior Rotating Equipment Technician for Saudi Aramco Total Refining and Petrochemical Company where he performed maintenance, inspections, and repairs on rotating equipment. He is seeking a similar position where he can utilize his extensive experience maintaining critical rotating equipment.
The document is a cover letter and resume from Deepak Fulpagare applying for the position of Head of Electrical Maintenance Department. In the cover letter, he expresses his interest in the position and highlights his 8.5 years of experience in areas such as commissioning, maintenance, and project management. His resume then provides further details on his relevant work experience at various companies, including his current role as Manager of Rolling Mill Division at Kalika Steel, as well as his educational background and technical skills.
1. Name: Domiciano L. Bejer
Mobile No.: +974 55807837
Home Landline No.: +974 44425767
Email: jomes255@gmail.com
Address in Qatar: Al Nazr, Doha Qatar
Address in Philippines: Brgy. Balete, Batangas City
Age/Sex/Nationality: 39 / Male / Filipino
Height/Weight: 5’ 4” (162cm.) / 145 lbs. (66kg.)
Civil Status: Married with two children
CAREER OBJECTIVE
To further develop a professional career in Power Plant Operation and contribute significantly in
achieving corporate goals of the company that offers opportunity to work and provides avenue to
apply knowledge, talents and ideas showing my integrity, honesty, commitment and excellence
and participating in activities that promote continuous success.
PROFESSIONAL SUMMARY
More than seven (7) years as Shift Charge Engineer in Qatar Power Company
One (1) year as Control Room Engineer in Qatar Power Company
Assistant Manager in KEPCO Ilijan Corporation Production Department
Almost six (6) years as Shift Charge Engineer in KEPCO Ilijan Corp. 1200MW CCGT Plant
Three (3) years as Process Specialist in Stephan Philippines, Inc. Surfactant Chemical Plant
Process Engineer in EEI Corporation Fabrication Yard
Graduate of Master in Business Management (Major in Business Management)
Bachelor Degree in Mechanical Engineering
Licensed Mechanical Engineer (Philippine Professional Regulation Commission)
OTHER KEY TECHNICAL SKILLS
Predictive Maintenance and Condition Monitoring, University of the Philippines 2003
Programmable Logic Control Course, University of the Philippines 1999
AutoCAD, Windows and Microsoft Office, ABCC Philippines, Inc. 1997
Primavera Project Planner
Knowledgeable in CMMS-Maximo
Knowledgeable in Nisoft Eclipse II PTW System
Knowledgeable in Internal Audit-TUV Certificate
Hands-on training on Sr. Operations Engineer position for more than four months
EMPLOYMENT DETAILS
Shift Charge Engineer, Qatar Power Q.S.C (April 1, 2007– present)
Company Description
A joint stock company established on 5th
Jan 2005 to build, operate and maintain a 1025MW Power
and 60MIGD Water Plant in Ras Laffan Industrial City, Qatar. The objective of the company is to
provide water and electricity to the State of Qatar for a period of 25 years from its commercial
operation in 2006 in a safe, environmentally clean, efficient and reliable manner. The company
employs three (3) units Siemens 237MW V94.3A(4) Gas Turbines, three (3) units Ansaldo Heat
Recovery Steam Generators, two (2) units Siemens 221MW M30-40-M2A (M20) Back Pressure
Steam Turbines and four (4) units Doosan’s 15MIGD Multi-Stage Flash Distillers.
CV-Domiciano L. Bejer Page 1 of 6
2. Job Responsibilities:
Responsible for leading the Operations Shift Team to ensure the plant meets the required
availability, reliability, efficiency, generation and cost targets, safely and within strict
environmental limits. This includes responsibility for making accurate and timely decisions on
matters affecting plant processes and performance and consulting with the Production Manager
when necessary.
Provides focused leadership to the shift team to achieve plant performance and ensure optimum
level of power and water export as required by the off taker.
Ensures shifts are well manned and required resources are available for the team to operate the
plant safely, reliably and efficiently.
Understand plant status at shift takeover and exchanges important details to the shift team.
Coordination among the operations and maintenance teams for routine and corrective
maintenance requirements.
Ensures effective implementation of safety rules on a shift by shift basis.
Ensures and oversees routine testing activities.
Oversees and monitors plant start-ups and shutdown as required.
Continuous monitoring and analysis of equipment operating parameters for early prediction of
abnormal condition and initiate appropriate action to prevent unscheduled unit or equipment
outage.
Oversees chemical processes, sampling and water plant control for quality standards and
environmental and safety compliance.
Establish and facilitate training programs for individual development and operational competence.
Coordinate and liaise with Kahramaa, Qatar Petroleum and Common Seawater Facility for the
operational and quality issues.
Prepares reviews and ensure that relevant procedures and instructions are being followed so that
work is carried out in a controlled and consistent manner.
Plays the role of Incident Commander in emergency circumstances.
Communication and cooperation with the Maintenance and Operation, Finance and Accounting,
HR/Administration and HSE Team.
Control Room Engineer, Qatar Power Q.S.C (January 29, 2006– March 31, 2007)
Job Responsibilities:
Responsible for plant operations from the control room to ensure the plant meets the required
availability, reliability, efficiency, generations and cost targets, safely and within strict
environmental limits. This includes regular equipment start-ups, shutdowns, changeovers and
regular operation/monitoring, as well as responding to alarms and emergency conditions.
Ensures optimum performance of the plant at all times and maintains the level of power and water
export as required by off taker control centers.
Performs periodic plant test activities to ensure reliability of trip devices and standby plant
equipment.
Performs safe plant start-up and shutdown activities to maintain optimum reliability of power and
water plant equipment.
Monitors and analyses performance parameters of the plant for change and performs corrective
actions necessary to keep the plant in a safe and efficient running condition.
Planning and controlled changeover/shutdown of plant equipment for maintenance purposes.
Directs and guides field operators to operate plant equipment in the field and conduct routine
plant test/changeover/maintenance activities.
Prepares the following reports: Shift Reports, Shift Production Control Room Log, Other reports
related to equipment operation
Play the role of Incident Commander in case of emergency in the absence of Shift Charge Engineer.
CV-Domiciano L. Bejer Page 2 of 6
3. Adhere, prepare and revise location procedures and work instructions based on accepted
standards for efficient, safe and reliable operations.
Coordinates with the SCE and maintenance staff for planned and unplanned maintenance
activities.
Coordinates with Kahramaa Control Center for power and water export, gas supplier and sea
water supplier.
Assistant Manager, KEPCO Ilijan Corporation (January 2006 )
Company Description
This company built, operates and maintains a 1200MW Combined Cycle Gas Turbine Power Plant
located in Ilijan, Batangas City, Philippines. The plant is composed of two (2) power blocks of
600MW each. Each block comprises of two (2) Mitsubishi Oil-Gas fired 230MW M501G Gas
Turbine Generators, exhausting to two (2) Hitachi HRSGs. The combined cycle is supplying steam
to Mitsubishi 250MW Condensing Steam Turbine at 150bar/540o
C.
Job Responsibilities:
Supports the Plant Reliability Manager in overseeing the Operation Department
Provides necessary inputs and supports in the preparation of budget for the department and track
variances.
Suggests and implements system modifications for more efficient, safe and reliable operation.
Assist in the preparation of monthly department report.
Carry out other operation-related tasks which may be delegated by the Plant Reliability Manager.
Shift Charge Engineer, KEPCO Ilijan Corporation, (March 1, 2000 - December 31, 2005)
Job Responsibilities:
Responsible for the safe and reliable operation of the power station on a shifting basis and will be
supervising the work of Control Room Operators, Switchboard Operator, Gas Turbine Operators
and Steam Turbine Operator.
Responsible to the Plant Reliability Manager for the coordination and execution of all operation-
related activities of the power station during the shift.
Evaluates equipment troubles occurring under his shift and identify operation constraints /
limitations to ensure units availability and reliability.
Involves in troubleshooting activities on all operation-related matters of the power station to
determine the root cause of the problem and execute the most appropriate countermeasure in
accordance with his superiors.
Directly in-charge of all operational activities of the power station provides instructions and
necessary details to Plant Operators for the specific task required.
Resolves operation-related troubles of the power station especially during transient conditions or
emergency situations and implements precautionary measures during critical on-line maintenance
works.
Oversee the execution of lock-out / tag-out for maintenance works to ensure safety of personnel
and equipment.
Preparation, evaluation, implementation and revision (if necessary) of SOP’s based on vendor
requirements and accepted standards for efficient, safe, and reliable operation.
Coordinates with the grid dispatch center and gas receiving facility personnel regarding the power
station load and fuel requirement.
Prepare necessary reports and make correspondence relative to the work.
Responsible for the continuous education and training of personnel in his group.
Awards Received:
Best Employee Award, December 2004
Hall of Fame Awardee for Superior Performance as Shift Charge Engineer, September 2004
Plant Safety Award, September 2004
CV-Domiciano L. Bejer Page 3 of 6
4. Recognition on Contribution to Plant System Modification, September 2004
Process Specialist, Stephan Philippines, Inc. , (January 7, 1997 – February 29, 2000)
Company Description
This company operates and maintains the Surfactant and Specialty Chemical Plant located in
Cocochem Agro-Industrial Park, Bauan, Batangas, Philippines.
Job Responsibilities:
Operates Air/SO3 Plant, Sulfonation/Sulfation Plant, Batching Plant and Dryer Plant.
Operates plant utilities for plant and instrument air, water and air chiller, hot water, cooling water
and soft water.
Monitors chemical and mechanical processes by taking the parameters and make the necessary
adjustment according to applicable System Procedures and Work Instructions.
Prepares production batchlist reports and related documents.
Initiates plant start-up/shutdown according to established Work Instructions (WI).
Recommends system improvement and participates on process developmental study.
Reports equipment abnormalities, applies quick fix, analyzes root causes and determines the most
appropriate corrective/preventive action(s) using the Quality Improvement Tools.
Takes samples and performs in-process material (intermediates and finished) testing and
compares results to criteria specified in the Quality Plan (QP).
Guides/Assists maintenance crew in their repair works on the system.
Coordinates with logistics personnel in matters regarding raw materials and assists them in
sorting finished product.
Takes part in commissioning new equipment/facilities.
Assists in doing Experimental Production Run (EPR) in determining plant capability to run new
product.
Acquaints production temporaries/contractors for their work load.
Prepares procedures and work instructions.
Important Accomplishments:
Established several system procedures; manufacturing, logistics, current good manufacturing
practices work instructions in compliance to the requirements of ISO 9002:1994. Thus, received
award for exemplary participation and contribution in work group and ISO 9000 activities.
Assigned as Internal Quality Auditor after passing the oral and written examinations given by TUV
Rheinland Philippines, Inc. and had conducted several audit activities at the plant.
Process Engineer, EEI Corporation, (November 1996 – May 1997)
Company Description
Construction and Fabrication Yard located in Sta. Maria, Bauan, Batangas, Philippines
Job Responsibilities:
Prepares project documentation on fabrication travelers, Addenda, shop operational procedures
and instructions.
Coordinates with Production Planning Group for production batchlist releases.
Technical code and standard study.
Shop equipment and tooling capacity study.
Responsible in detailing the project highlights, process workflow needed for project de-
briefing/pre-fabrication meeting.
Updates traveler blocks on change notices and latest drawing revision number and change notice
block on affected approved for fabrication drawing.
CV-Domiciano L. Bejer Page 4 of 6
5. Recommends to the immediate superior work simplification scheme of the project.
Reviews/Checks technical sketches/cutting lists prepared by Draftsman.
Initiate drawing review detailing, clarifies drawing vague areas and documents finding via change
notice control.
Undertakes detail shop process developmental study.
Follows/Abides in the company rules and regulations.
Prepares periodic accomplishment reports.
EDUCATIONAL QUALIFICATIONS
Post Graduate: Master in Business Management, University of Batangas, March 2005
College: Bachelor of Science in Mechanical Engineering, Batangas State University, April 1996
TRAININGS ATTENTED
Interpersonal Communication Skills, EuroMaTech, November 2-6, 2014
Radiation Protection Supervisor Training Course, Ionactive Co.
United Kingdom
September 1-2, 2010
Siemens MMI Operation Training
Siemens Energy Sector-Fossil Power Generation
Erlangen, Germany
September 29 – October 2, 2008
ISO 18001:2007 Awareness Training, TUV Middle East, November 26, 2007
ISO 14001:2004 Awareness Training, TUV Middle East, November 27, 2007
ISO 14001:2004 EMS Internal Auditor Training, TUV Middle East, November 29, 2007
OHSAS 18001:2007 Internal Auditor Training, TUV Middle East, November 28-29, 2007
Managing Safely, IOSH, October 29, 2008
Performance Management Course, Vital Impact, September 2008
From Engineer to Manager, VMAC Business Group, September 20-21, 2011
Heat Recovery Steam Generator (HRSG) Operation and Maintenance
Bobcock-Hitachi, Inc.
Kure, Japan
July 21 to August 8, 2000
MHI 501G Gas Turbine & Steam Turbine Operation and Maintenance
Mitsubishi Heavy Industries Inc.
Takasago City, Japan
June 15, 2000 to July 20, 2000
On-the-Job Training of Power Generation Basics
Ulsan Combined Cycle Power Plant
Ulsan City, South Korea
May 20, 2000 to June 5, 2000
Basics of Power Generation, Auxiliary Equipment & Controls
Korea Electric Power Corporation (KEPCO)
Conventional Power Generation Training Center
Seoul City, South Korea
March 5, 2000 to May 19, 2000
People Handling Skills
Chemical Safety Handling Course
Gas Turbine Combustion Pressure Fluctuation Monitoring System
Primavera Project Planner
BHK Site Training for HRSG
Hitachi Site Training for STG & GTG
Oil Spill Response Training
CV-Domiciano L. Bejer Page 5 of 6
6. MHI Site Training for GT/ ST Operations Diasys-Up V & Maintenance
Distributed Control System (DCS) Training
Water Treatment Training
Electrochlorinarion System Training
Continuous Emission Monitoring System Training
Balance of Plant Training
New Technologies for Plant Maintenance
Side Entry Tank Mixers, Snap-On Tools, Packings and Gaskets
Innovations in EHS Management and Proposed Philippine Clean Air Act
First Aid and Basic Life Support Training
A Continuing Challenge: System and Process In Piping, Filtration And Automation Seminar
Welding Technology
Stainless Steel Metallurgy and Applications
Stepan Quality Education
Internet for Mechanical Engineers
Internal/External Auditing Course
Statistical Process Control
Transmation
Self-Contained Breathing Apparatus (SCBA)
Introduction to the Technology of Sulfation/Sulfonation
Instrumentation
Power Plant Operation and Proper Waste Disposal
ISO 9000
I hereby certify that the above information is true & correct to the best of my knowledge and belief.
Domiciano L. Bejer
CV-Domiciano L. Bejer Page 6 of 6
7. MHI Site Training for GT/ ST Operations Diasys-Up V & Maintenance
Distributed Control System (DCS) Training
Water Treatment Training
Electrochlorinarion System Training
Continuous Emission Monitoring System Training
Balance of Plant Training
New Technologies for Plant Maintenance
Side Entry Tank Mixers, Snap-On Tools, Packings and Gaskets
Innovations in EHS Management and Proposed Philippine Clean Air Act
First Aid and Basic Life Support Training
A Continuing Challenge: System and Process In Piping, Filtration And Automation Seminar
Welding Technology
Stainless Steel Metallurgy and Applications
Stepan Quality Education
Internet for Mechanical Engineers
Internal/External Auditing Course
Statistical Process Control
Transmation
Self-Contained Breathing Apparatus (SCBA)
Introduction to the Technology of Sulfation/Sulfonation
Instrumentation
Power Plant Operation and Proper Waste Disposal
ISO 9000
I hereby certify that the above information is true & correct to the best of my knowledge and belief.
Domiciano L. Bejer
CV-Domiciano L. Bejer Page 6 of 6