1. Syed Abrar Ul Haq
Electrical Engineer/Safety Officer (Acting)
Mobile Number: +918520076043
E-mail Id: abrarelectrical98@outlook.com
Postal address: 87/1119-d-2, Revenue Colony, Kalyani Nagar
Back side of Vijay Hospital-Kurnool-518002- Andhra Pradesh-India.
OBJECTIVE:
A positions in a result oriented company that seeks an ambitious and carrier conscious person. Where
acquired skills and education will be utilized towards continuous growth and advancement.
PROFESSIONAL PROFILE:
A result oriented professional B.E in Electrical Engineer with Diploma in Advance Industrial Safety , with
over 4 years – 4 Months of experience in Cement Plant and Power Plant with an exposure of Project
Planning, Safety in Electrical systems, Liaison & coordination etc.
Currently seeking a better opportunity.
Astute engineer with a flair for adopting methodologies, systems in compliance with quality
standards.
Executing projects from Concept-to-Launch with focus on Project Scope and rendering end-to-
end solutions along with troubleshooting all type of electrical panels, motors and other electrical
equipment’s.
Adept at enhancing systems and implementing energy conservation initiatives to bring greater
cost efficiency levels & energy / power reductions.
EDUCATION QUALIFICATION:
1. One year Diploma in Advance Industrial safety.(WHEN I CAME ON VACATION FROMSAUDI ARABIA TO
INDIA IN YEAR 2019 AT THAT TIME I COMPLETED MY EXAM)
Year of passing -2019.
Pass Percentage -62.18%
2. Bachelor of Engineering in Electrical
Year of Passing -2016.
Pass Percentage -62.44%
3. Diploma in Electrical Engineering
Year of Passing -2013
Pass Percentage-62.24%.
PROFESSIONAL WORK EXPERIENCE:
1) Worked in Southern Province Cement Company-Power Plant Section of 114MW- Bisha Plant-Bisha-Saudi Arabia.
Designation: Electrical Engineer-Maintenance / Safety officer (Acting)
Working Period: From January -2018 to November -2020.
Chief Responsibilities:
I have been entrusted the responsibility to handle maintenance of wartisla Engines Electrical Equipment and also I
have done as a Safety officer acting member.
Working knowledge in Wartsila 18V38, 20V32 Engines and its auxiliaries (Alfa Laval Separators, Fuel
Heaters, Feed Pumps, Radiators)
Well familiar with UNIC 1, UNIC 2, UNIC 3, UNIC 4 Wartsila control systems.
Working knowledge in 13.8KV Alternators and 110KV Generating transformers.
Working knowledge in 11KV/440V transformers & Auxiliaries.
Working knowledge in AVR DECS system and ABB Unitrol.
Working knowledge in PLC logic control systems and VFD Systems.
Knowledge in Operation and Maintenance of SF6 & Air blast circuit breakers.
Working knowledge in Preparing Plant production records, Maintenance schedule & Reports.
Technical knowledge in Electrical and Energy subjects.
Working knowledge in RTD, Thermocouple, and Proximity sensors calibration.
Major maintenance and testing of 9.1MW and 9.0MW ABB and AVK make alternators, Testing of
Power cables and bus bars.
2. Protection relays – working knowledge in all protection relay operation and maintenance &
secondary injection method of relay testing.( Vamp, ABB, SIEMENS make Generator protection relays
- Earth fault, Over current, Reverse power and Restricted earth fault relay, Generator Differential
protection relays working Vamp 265, Vamp 210, Vamp 265i, vamp 50, SPAD, SPAG, SPAJ, 7SJ61).
Familiar with Test Equipments like SVERKER650, MEGGER SVERKER 780 and MEGGER Test
equipments.
Also involved in HSE/Safety Activities in Plant During Shutdown Time as well as Running Plant and Commissioning
Period .
Participate in risk assessment and planning to update with coordination of execution team.
Make sure of implementation of PTW system.
Update all Safety documents and manuals as per QMS, EMS, OHSAS and client
requirements.
Develop Safety circulation plans for work sites.
Constant monitoring of field jobs
Maintain good housekeeping practice at site.
During Shutdown Periods Safety Officer Activities:
Making sure of proper permit compliance
Report accidents / near miss to client and to Top management of the organization.
Provide appropriate safety and Protective equipment to all employees at work site and to
ensure that the equipment provided must be properly used.
Responsible to correct any, unsafe act and unsafe condition.
Ensure that safe and healthy working environment for employees is to be maintained at all
times, including vehicle safety.
Conduct daily safety meeting with the representative of workmen on a regular basis to
promote safety consciousness among employees.
Ensure all personnel are educated in fire prevention practices and the use of fire
extinguishing equipment.
Responsible to implement safety in every activity at all locations where the work is
performed in such manner, as to avoid any risk or bodily harm to persons or damage to
property.
During Commissioning Period of Second Phase of Diesel Power Plant of 36.4MW I have involved
in Safety /HSE Activities as well as in Electrical Field.
HSE audit and Inspection of work sites.
Inspection of accommodation facilities and living quarters of sub contractors.
Accident Investigation and Reporting with recommendations for prevention.
Monitoring and Implementation of safety procedures.
Carry out monitoring Assessments and Audit activities of sub contractors as per the
company system or as per the requirements, inclusive the planned audit and review
activities.
Perform plant/equipment checks at the site and workshops.
Maintain a Daily, Near Miss, Incident and all safety-related activities at the site.
Analyses of Unsafe acts / Conditions and recommending corrective measures and follow up.
Maintaining HSE statistical data and updating the performance notification records.
Identify the potential hazards and recommend control measures.
Advice management on safety related matters.
Generate monthly/yearly accident investigation analyses reports for management review.
Monitor pre-mechanical /Electrical commissioning/ commissioning activities.
3. 2) Worked in Dalmia Cement (B) Limited-Jammalamadugu-Kadapa district-Andhra Pradesh-India. Under
third party role-Larsen and Toubro Electrical and Automation.
Designation: Junior Engineer-Electrical
Working Period: June-2016 to January-2018.
Chief Responsibilities:
Maintenance of 132/11KV Switchyard.
Maintenance of Power Transformers, Converter duty transformers & Auxiliary transformers.
Maintenance of HT Breakers (11KV and 13.8 KV ) & LT Breakers (800 A TO 3000A) of Siemens
,HT and LT Motors(0.37 KW TO 5200KW).
Maintenance of APFC PANEL .
Maintenance of DC Battery Bank for HT Panel and HT,LT Motors
Looking after job responsibilities like ; Operation and maintenance of 300 TPH VRM
CEMENT MILL 5200 KW 11 KV and above Slipring induction motor. 5500KW and above MV
VFD CEMENT MILL Fan drive,2*150 TPH Dense Phase.
Maintenance of MCC ,PCC,and ESP.
Maintenance and troubleshooting of VFDs.
Maintenance of DOL,RDOL,HDOL,STAR/DELTA,SOFTSTARTER,LRS,GRR Starters.
ELECTRICAL CONTROL SCHEME .LOTOTO System.
Preparation of preventive maintenance schedules for all Electrical equipment such as
Substation Transformer, APFC panel, MV Switchgear, Capacitor Bank, VFdrive,Battery
Bank,HV/LV Motors,LRS.etc.
Making daily power report, power calculation, and taking various steps to reduce the power
consumption from 74 to 71 Kkwh/t.
During working in Dalmia Cement (B) Limted involved in HSE/Safety Activities.
Monitoring workplace activities to ensure the workers comply with company
safety polices and Local safety regulations.
Identify the safety training needs and provide the safety training to employees. Always keep
in touch with all workers to remind safety.
Make daily inspection of the workers if they are in prescribed PPE or not. Like (Safety
Helmet, gloves, shoes, dust mask, goggles and safety harness with tie offetc).
Constantly inspecting the work site for the purpose of discovering the hazardous conditions
and unsafe practices and correct them before they cause accident.
Conduct daily safety inspection in Field Process Area (FPA), Gas Insulated Substation (GIS),
and Air Insulated Substation (AIS) and motivates work force to work with safety.
Liaise regularly with senior HSE Advisor and/or Director of HSE on matter of HSE and Submit
monthly HSE Report at end of each calendar month providing updates on performance
initiatives, safety trainings and other
relevant safety information.
Able to provide safety coaching to the frontline personnel in hazard identification and safety
observation.
Trained Crew members for safety work, delivered lecture on team work and communication
skill.
Planned and conducted site (office) Specific HSE Trainings, (Fire fighting, First Aid, Gas
Testing, lifting, safety Induction, Hazardous Chemical Management etc).
Conduct Risk assessment of different jobs & JSA/TRA (Job safety Analysis/Taskrisk
assessment)for any major jobs at site like Heavylifting, working at Heightsas well as
Confinedspace Entry for any jobs.
Conduct periodic inspection of tools & equipment and ensure right tools are used for right
job.
Conduct investigation of accidents, finding the root causes and
recommending preventive measures to control them from happening again.
Check work permits at site.
Ensuring the gas test carried out for the all confined spaces and inspecting the confined
spacesfor their any deviations
Check the Scaffolding as per the standards and recommending for the corrections if found
with any deviations.
4. Checkproper warning signs, warningtapes andbarricadesinstalledornot where required
toprevent the incident / accidents at the construction site.
Checking the recordsof all heavy equipment and lifting accessories.
Check the fire extinguishers condition and maintain the record of its location andCondition.
Check availability of First Aid Kit.
Check proper clearances are maintained while working below near Power Lines.
Maintain proper housekeeping at thesite.
Conduct the tool box meeting and giving good safety instructions to new persons in job site.
Making daily, weekly and monthly reports and analyzing for the repeated observations so
that the preventive measures can be foundout.
Conducting weekly Site Safety walk through with the company management.
Checking all the documents of the heavy equipment before they are going to be mobilized
to the site forwork.
Conducting mock drills for different scenarios at least once in a three months
Expertise in hazardidentification,risk analysis, riskassessment andjob safety analysis
Create safety awareness by promoting safety meetings, presentations,andopen forum
discussions andby implementingsafety training Etc.
Soft Skill
Highly motivated and enthusiastic
Skills
Managerial Skills
Multitasking
Public speaking
Adaptable
TECHNICAL SKILLS:
1) Power Systems 2) Electrical Machines 3) Switchgear Protection 4) Drives and control.
5) SAP 6) Preventive Maintenance 7) Electrical motor diagnostic 8) Motor Overhauling.
9) Safety.
CERTIFICATION:
A Short Term course on PLC,SCADA,DCS from Larsen and Toubro Electrical and
Automation Navi Mumbai – Maharashtra - India.
5 Days Workshop attended at L&T SwitchGear –Maintenance of LT-Breaker.
INTRESTS:
1) Electrical Engineer
2) Safety Officer
Declaration:
I hereby declare that all information provided here by me is true.
Place :
Date:
(SYED ABRAR UL HAQ)