In this unit -5, we aim at discussing briefly three important topics related to surface chemistry, Viz., adsorption, catalysis and colloids including emulsion and gels.
Surface chemistry ppt CLASS 12 CBSE CHAPTER 5ritik
- Adsorption is the accumulation of molecular species at the surface of a solid or liquid rather than in the bulk. The substance that accumulates is called the adsorbate and the surface it accumulates on is the adsorbent.
- Examples of adsorption include gases accumulating on charcoal surfaces, dye molecules accumulating on charcoal when added to solutions, and aqueous sugar solutions becoming colorless when passed over beds of charcoal.
- There are two main types of adsorption - physical adsorption (physisorption) due to weak van der Waals forces, and chemical adsorption (chemisorption) due to chemical bonding between adsorbate and adsorbent.
Surface chemistry deals with phenomena that occur at interfaces between phases. Adsorption is a key phenomenon where molecules accumulate at surfaces rather than in the bulk. Some materials like charcoal and silica gel act as good adsorbents due to their large surface areas. Adsorption involves molecules of gases, liquids, or dissolved substances concentrating on the surface of an adsorbent rather than in its bulk.
The document discusses adsorption, which is the accumulation of molecules on the surface of solids or liquids. It defines key terms like adsorbate, adsorbent, desorption, and occlusion. The document also distinguishes between physisorption and chemisorption, and notes factors that influence adsorption like surface area, temperature, and pressure. Some applications of adsorption are mentioned as well, such as in gas masks, vacuum production, water softening, catalysis, petroleum refining, and chromatography.
This is an effort to makemodule and lesson plan for delivering lecture on class room. The unit covered is surface chemistry of class XII Chemistry subject.
The document provides an overview of surface chemistry concepts including adsorption, types of adsorption (physisorption and chemisorption), factors affecting adsorption, adsorption isotherms, catalysis, colloids, and classification of colloids. It defines key terms and describes processes such as adsorption, mechanisms of adsorption, differences between physisorption and chemisorption, applications of adsorption, types and mechanisms of catalysis, preparation and purification of colloids, and properties of colloidal solutions. The document aims to explain important surface chemistry concepts and phenomena.
Adsorption is the process where matter accumulates at the interface between two phases, such as a gas transferring to the surface of a liquid. This occurs due to higher surface energy at interfaces compared to interior molecules. Adsorption equilibria can be modeled using isotherms such as Langmuir, Freundlich, and BET, which relate the amount adsorbed to concentration in solution. Factors like adsorbate properties, pH, temperature, and presence of other solutes influence adsorption extent and isotherm shape.
Surface chemistry ppt CLASS 12 CBSE CHAPTER 5ritik
- Adsorption is the accumulation of molecular species at the surface of a solid or liquid rather than in the bulk. The substance that accumulates is called the adsorbate and the surface it accumulates on is the adsorbent.
- Examples of adsorption include gases accumulating on charcoal surfaces, dye molecules accumulating on charcoal when added to solutions, and aqueous sugar solutions becoming colorless when passed over beds of charcoal.
- There are two main types of adsorption - physical adsorption (physisorption) due to weak van der Waals forces, and chemical adsorption (chemisorption) due to chemical bonding between adsorbate and adsorbent.
Surface chemistry deals with phenomena that occur at interfaces between phases. Adsorption is a key phenomenon where molecules accumulate at surfaces rather than in the bulk. Some materials like charcoal and silica gel act as good adsorbents due to their large surface areas. Adsorption involves molecules of gases, liquids, or dissolved substances concentrating on the surface of an adsorbent rather than in its bulk.
The document discusses adsorption, which is the accumulation of molecules on the surface of solids or liquids. It defines key terms like adsorbate, adsorbent, desorption, and occlusion. The document also distinguishes between physisorption and chemisorption, and notes factors that influence adsorption like surface area, temperature, and pressure. Some applications of adsorption are mentioned as well, such as in gas masks, vacuum production, water softening, catalysis, petroleum refining, and chromatography.
This is an effort to makemodule and lesson plan for delivering lecture on class room. The unit covered is surface chemistry of class XII Chemistry subject.
The document provides an overview of surface chemistry concepts including adsorption, types of adsorption (physisorption and chemisorption), factors affecting adsorption, adsorption isotherms, catalysis, colloids, and classification of colloids. It defines key terms and describes processes such as adsorption, mechanisms of adsorption, differences between physisorption and chemisorption, applications of adsorption, types and mechanisms of catalysis, preparation and purification of colloids, and properties of colloidal solutions. The document aims to explain important surface chemistry concepts and phenomena.
Adsorption is the process where matter accumulates at the interface between two phases, such as a gas transferring to the surface of a liquid. This occurs due to higher surface energy at interfaces compared to interior molecules. Adsorption equilibria can be modeled using isotherms such as Langmuir, Freundlich, and BET, which relate the amount adsorbed to concentration in solution. Factors like adsorbate properties, pH, temperature, and presence of other solutes influence adsorption extent and isotherm shape.
The document discusses Hess's law, which states that the heat of reaction is the same whether a chemical process occurs in one or multiple steps. Specifically:
- Hess's law allows adding together multiple chemical equations to determine the enthalpy change of the overall equation.
- Two examples are provided to demonstrate calculating the enthalpy change of an overall reaction by combining individual reaction enthalpies.
- In both examples, the individual reactions are rearranged and combined to produce the overall reaction, and the enthalpy terms are summed to find the enthalpy change of the overall reaction.
1. Solutions are homogeneous mixtures of two or more components, where the component present in smaller amounts is called the solute and the primary liquid component is the solvent.
2. Solutes can be electrolytes, which dissociate into ions, or nonelectrolytes, which do not dissociate. Common methods to express the concentration of solutions include molarity, molality, mole fraction, and percent composition.
3. The solubility of solids in liquids and gases in liquids depends on factors like temperature, pressure, and the nature of the solute and solvent. Henry's law and Raoult's law describe gas solubility and vapor pressure lowering in solutions. Ideal solutions follow
Oxidation reactions in chemical engineering. Oxidation state. Oxidation state changes. Identify the element oxidized . Oxidation and reduction half-reactions.
Iron with hydrochloric acid . Zinc and copper. Aluminum and manganate. Cyanide and manganate. Production of ammonia from nitrite.
Balancing Oxidation Reduction Equations. The sulfite ion concentration present in wastewater from a papermaking plant.
Oxidizing and reducing agents
- Adsorption occurs when a gas or liquid accumulates on the surface of a solid, forming a film. It differs from absorption which involves diffusion into the bulk.
- The Langmuir adsorption model describes monolayer adsorption on uniform sites but makes assumptions that do not always apply. The BET model extends it to account for multilayer adsorption.
- The Temkin isotherm accounts for indirect interactions between adsorbed molecules which affect heat of adsorption and coverage at high pressures.
The document discusses chemical equilibrium. It defines equilibrium as a state where the rates of the forward and reverse reactions of a chemical process are equal, resulting in no net change in the concentrations or properties of the system. It provides examples of physical and chemical equilibrium processes. It describes key characteristics of equilibrium like dynamic nature, constant concentrations and temperatures, and the relationship between reaction rates and equilibrium constants.
Soluion and colligative propertries 2017nysa tutorial
it is based on CBSE, ICSE, HSC ,JEE, NEET, AIPMT, MTCET.
class 12 chemistry.
for buy ppt pay by paytm acount- 8879919898. price-Rs99 only/-
for more detail go my site
www.akchem.blogspot.com
Chem 2 - Chemical Equilibrium IX: Le Chatelier's Principle and Pressure - Vol...Lumen Learning
This document discusses how chemical equilibriums respond to changes in pressure, volume, and the addition of inert gases according to Le Chatelier's principle. It explains that when pressure increases on a system, the equilibrium shifts toward the direction with fewer moles of gas. When an inert gas is added at constant volume, the equilibrium does not shift, but when added at constant pressure the equilibrium shifts toward more moles of gas as the volume expands. The document uses examples and questions to illustrate these concepts.
The document discusses adsorption, which is the accumulation of molecular species at the surface of a solid or liquid rather than in the bulk. The substance accumulating at the surface is called the adsorbate, and the material it accumulates on is the adsorbent. Adsorption can occur with gases accumulating on charcoal, dyes on animal charcoal, or water molecules on silica gel. It is influenced by factors like temperature, pressure, surface area, and the strength of interaction between adsorbate and adsorbent molecules. There are two main types - physical adsorption due to weak van der Waals forces, and chemical adsorption where chemical bonds form. Adsorption finds applications in areas
This document provides an overview of chemical kinetics and reaction rates. It discusses:
1) Chemical kinetics deals with how fast chemical reactions occur and the factors that affect reaction rates.
2) Reaction rates can vary significantly, from fractions of a second to years, as seen in examples of iron rusting and silver chloride formation.
3) The study of chemical kinetics involves determining rates of reaction, factors affecting rates, and reaction mechanisms.
It then provides examples and methods for determining reaction order and the effect of temperature on reaction rates.
1. Surface chemistry is the study of chemical phenomena that occur at interfaces between different phases such as solid-liquid, solid-gas, and liquid-gas. Surface chemistry is important for processes like catalytic reactions and electronics.
2. Adsorption is the adhesion of atoms, ions, or molecules of a gas or liquid to a surface. It differs from absorption, where a substance diffuses into another. The extent of adsorption depends on factors like the nature of the adsorbent, its surface area, the nature of the adsorbing substance, temperature, and pressure.
3. Adsorption isotherms describe the relationship between the amount of substance adsorbed and its pressure or
The document contains 12 questions from Class XII Chapter 5 on Surface Chemistry. It discusses topics like characteristics of chemisorption, factors affecting physisorption and chemisorption, adsorption isotherms, role of adsorption in catalysis, and classification of colloids. The questions are multiple choice or short answer questions assessing students' understanding of key concepts in surface chemistry.
The document discusses adsorption equilibria and regeneration. It defines adsorption as the accumulation of matter at the interface between two phases, such as a gas and a solid surface. The document then describes different types of adsorption including physical adsorption, chemical adsorption, and ion exchange. Common adsorption isotherm models are also summarized, such as the Langmuir, Freundlich, BET, and Temkin isotherms. Finally, five types of physisorption isotherms are described that can occur on solid surfaces depending on the material properties.
This document discusses electrolytic solutions and electrochemistry. It begins by defining electrochemistry as the study of chemical reactions involving electron transfer between an electrode and electrolyte. It then discusses different types of solutions, distinguishing between electrolytic and non-electrolytic solutions. Electrolytic solutions contain ions and are electrically conductive. The document also discusses the differences between electronic and electrolytic conductors, and how conductivity is affected by various factors like temperature, concentration, and ion size. It introduces concepts like equivalent conductance, molar conductance, activity, and activity coefficients. In summary, the document provides an overview of key concepts relating to electrolytic solutions and electrochemistry.
The document discusses the properties of group 14 elements. It notes that carbon and silicon are non-metals, germanium is a metalloid, and tin and lead are metals. It discusses their electronic configurations, atomic radii, ionization energies, electronegativity, oxidation states, and physical properties. Carbon exhibits allotropes like diamond, graphite and buckminsterfullerenes which have the same chemical composition but different physical properties. Diamond has a high melting point and hardness due to its strong covalent bonds.
This document provides information on surface chemistry concepts including adsorption, desorption, absorption, and sorption. It defines these terms and discusses the differences between adsorption and absorption. Factors that affect adsorption such as the nature of the adsorbent and adsorbate, pressure, temperature, and activation of the solid adsorbent are summarized. The document also discusses Freundlich adsorption isotherms, adsorption from solution, applications of adsorption, and concepts related to catalysis including activation energy and catalytic promoters and inhibitors.
1. Surface chemistry is the study of processes that occur at the interface between two bulk phases, such as liquid-liquid, liquid-solid, or gas-solid.
2. There are two main types of interactions between substances and surfaces: adsorption, where molecules adhere to the surface, and absorption, where molecules enter and spread within the surface or bulk material.
3. Adsorption can be physical (weak van der Waals forces) or chemical (stronger chemical bonding), and adsorption equilibria determine how much of a substance will adsorb based on conditions like pressure, temperature, and surface area.
This document discusses chemical equilibrium, including definitions, characteristics, and factors that affect equilibrium. It defines chemical equilibrium as a state where the forward and reverse reaction rates are equal. Characteristics include the dynamic nature of equilibrium and constant concentrations of reactants and products at equilibrium. Factors that affect equilibrium position include concentration, pressure, temperature, and catalyst additions according to Le Chatelier's principle. The relationship between the equilibrium constant K and standard Gibbs free energy change ΔG° is also described.
This document summarizes key information about alkenes (olefins):
1) Alkenes contain carbon-carbon double bonds and are classified as unsaturated hydrocarbons. Common examples include ethylene and propene.
2) Alkenes undergo characteristic reactions such as addition of halogens, hydrogenation to form alkanes, hydration and polymerization. Many of these reactions follow Markovnikov's rule.
3) Alkenes are industrially important as monomers for polymers like polyethylene, polypropylene, PVC and polystyrene. Ethylene and propylene are the largest volume organic chemicals produced.
This document discusses various topics related to surface chemistry including adsorption, catalysis, and colloids. It begins by defining surface chemistry and adsorption. Important characteristics of adsorption include it being specific and spontaneous. Factors that affect adsorption are then outlined. The document also discusses desorption, sorption, physisorption and chemisorption. It then covers catalysis, including the adsorption theory of heterogeneous catalysis. Finally, it defines and compares true solutions, colloids, and suspensions.
This document provides information about adsorption, including definitions, examples, and applications. It defines adsorption as the accumulation of molecules on a surface, with the adsorbent being the surface and the adsorbate being the accumulated substance. There are two main types of adsorption: physical adsorption via van der Waals forces, and chemical adsorption via chemical bonds. Factors that affect adsorption include properties of the adsorbate and adsorbent, as well as surface area, pressure, and temperature. Common applications of adsorption include decolorization, gas masks, vacuum systems, catalysis, indicators, chromatography, and moisture control.
The document discusses Hess's law, which states that the heat of reaction is the same whether a chemical process occurs in one or multiple steps. Specifically:
- Hess's law allows adding together multiple chemical equations to determine the enthalpy change of the overall equation.
- Two examples are provided to demonstrate calculating the enthalpy change of an overall reaction by combining individual reaction enthalpies.
- In both examples, the individual reactions are rearranged and combined to produce the overall reaction, and the enthalpy terms are summed to find the enthalpy change of the overall reaction.
1. Solutions are homogeneous mixtures of two or more components, where the component present in smaller amounts is called the solute and the primary liquid component is the solvent.
2. Solutes can be electrolytes, which dissociate into ions, or nonelectrolytes, which do not dissociate. Common methods to express the concentration of solutions include molarity, molality, mole fraction, and percent composition.
3. The solubility of solids in liquids and gases in liquids depends on factors like temperature, pressure, and the nature of the solute and solvent. Henry's law and Raoult's law describe gas solubility and vapor pressure lowering in solutions. Ideal solutions follow
Oxidation reactions in chemical engineering. Oxidation state. Oxidation state changes. Identify the element oxidized . Oxidation and reduction half-reactions.
Iron with hydrochloric acid . Zinc and copper. Aluminum and manganate. Cyanide and manganate. Production of ammonia from nitrite.
Balancing Oxidation Reduction Equations. The sulfite ion concentration present in wastewater from a papermaking plant.
Oxidizing and reducing agents
- Adsorption occurs when a gas or liquid accumulates on the surface of a solid, forming a film. It differs from absorption which involves diffusion into the bulk.
- The Langmuir adsorption model describes monolayer adsorption on uniform sites but makes assumptions that do not always apply. The BET model extends it to account for multilayer adsorption.
- The Temkin isotherm accounts for indirect interactions between adsorbed molecules which affect heat of adsorption and coverage at high pressures.
The document discusses chemical equilibrium. It defines equilibrium as a state where the rates of the forward and reverse reactions of a chemical process are equal, resulting in no net change in the concentrations or properties of the system. It provides examples of physical and chemical equilibrium processes. It describes key characteristics of equilibrium like dynamic nature, constant concentrations and temperatures, and the relationship between reaction rates and equilibrium constants.
Soluion and colligative propertries 2017nysa tutorial
it is based on CBSE, ICSE, HSC ,JEE, NEET, AIPMT, MTCET.
class 12 chemistry.
for buy ppt pay by paytm acount- 8879919898. price-Rs99 only/-
for more detail go my site
www.akchem.blogspot.com
Chem 2 - Chemical Equilibrium IX: Le Chatelier's Principle and Pressure - Vol...Lumen Learning
This document discusses how chemical equilibriums respond to changes in pressure, volume, and the addition of inert gases according to Le Chatelier's principle. It explains that when pressure increases on a system, the equilibrium shifts toward the direction with fewer moles of gas. When an inert gas is added at constant volume, the equilibrium does not shift, but when added at constant pressure the equilibrium shifts toward more moles of gas as the volume expands. The document uses examples and questions to illustrate these concepts.
The document discusses adsorption, which is the accumulation of molecular species at the surface of a solid or liquid rather than in the bulk. The substance accumulating at the surface is called the adsorbate, and the material it accumulates on is the adsorbent. Adsorption can occur with gases accumulating on charcoal, dyes on animal charcoal, or water molecules on silica gel. It is influenced by factors like temperature, pressure, surface area, and the strength of interaction between adsorbate and adsorbent molecules. There are two main types - physical adsorption due to weak van der Waals forces, and chemical adsorption where chemical bonds form. Adsorption finds applications in areas
This document provides an overview of chemical kinetics and reaction rates. It discusses:
1) Chemical kinetics deals with how fast chemical reactions occur and the factors that affect reaction rates.
2) Reaction rates can vary significantly, from fractions of a second to years, as seen in examples of iron rusting and silver chloride formation.
3) The study of chemical kinetics involves determining rates of reaction, factors affecting rates, and reaction mechanisms.
It then provides examples and methods for determining reaction order and the effect of temperature on reaction rates.
1. Surface chemistry is the study of chemical phenomena that occur at interfaces between different phases such as solid-liquid, solid-gas, and liquid-gas. Surface chemistry is important for processes like catalytic reactions and electronics.
2. Adsorption is the adhesion of atoms, ions, or molecules of a gas or liquid to a surface. It differs from absorption, where a substance diffuses into another. The extent of adsorption depends on factors like the nature of the adsorbent, its surface area, the nature of the adsorbing substance, temperature, and pressure.
3. Adsorption isotherms describe the relationship between the amount of substance adsorbed and its pressure or
The document contains 12 questions from Class XII Chapter 5 on Surface Chemistry. It discusses topics like characteristics of chemisorption, factors affecting physisorption and chemisorption, adsorption isotherms, role of adsorption in catalysis, and classification of colloids. The questions are multiple choice or short answer questions assessing students' understanding of key concepts in surface chemistry.
The document discusses adsorption equilibria and regeneration. It defines adsorption as the accumulation of matter at the interface between two phases, such as a gas and a solid surface. The document then describes different types of adsorption including physical adsorption, chemical adsorption, and ion exchange. Common adsorption isotherm models are also summarized, such as the Langmuir, Freundlich, BET, and Temkin isotherms. Finally, five types of physisorption isotherms are described that can occur on solid surfaces depending on the material properties.
This document discusses electrolytic solutions and electrochemistry. It begins by defining electrochemistry as the study of chemical reactions involving electron transfer between an electrode and electrolyte. It then discusses different types of solutions, distinguishing between electrolytic and non-electrolytic solutions. Electrolytic solutions contain ions and are electrically conductive. The document also discusses the differences between electronic and electrolytic conductors, and how conductivity is affected by various factors like temperature, concentration, and ion size. It introduces concepts like equivalent conductance, molar conductance, activity, and activity coefficients. In summary, the document provides an overview of key concepts relating to electrolytic solutions and electrochemistry.
The document discusses the properties of group 14 elements. It notes that carbon and silicon are non-metals, germanium is a metalloid, and tin and lead are metals. It discusses their electronic configurations, atomic radii, ionization energies, electronegativity, oxidation states, and physical properties. Carbon exhibits allotropes like diamond, graphite and buckminsterfullerenes which have the same chemical composition but different physical properties. Diamond has a high melting point and hardness due to its strong covalent bonds.
This document provides information on surface chemistry concepts including adsorption, desorption, absorption, and sorption. It defines these terms and discusses the differences between adsorption and absorption. Factors that affect adsorption such as the nature of the adsorbent and adsorbate, pressure, temperature, and activation of the solid adsorbent are summarized. The document also discusses Freundlich adsorption isotherms, adsorption from solution, applications of adsorption, and concepts related to catalysis including activation energy and catalytic promoters and inhibitors.
1. Surface chemistry is the study of processes that occur at the interface between two bulk phases, such as liquid-liquid, liquid-solid, or gas-solid.
2. There are two main types of interactions between substances and surfaces: adsorption, where molecules adhere to the surface, and absorption, where molecules enter and spread within the surface or bulk material.
3. Adsorption can be physical (weak van der Waals forces) or chemical (stronger chemical bonding), and adsorption equilibria determine how much of a substance will adsorb based on conditions like pressure, temperature, and surface area.
This document discusses chemical equilibrium, including definitions, characteristics, and factors that affect equilibrium. It defines chemical equilibrium as a state where the forward and reverse reaction rates are equal. Characteristics include the dynamic nature of equilibrium and constant concentrations of reactants and products at equilibrium. Factors that affect equilibrium position include concentration, pressure, temperature, and catalyst additions according to Le Chatelier's principle. The relationship between the equilibrium constant K and standard Gibbs free energy change ΔG° is also described.
This document summarizes key information about alkenes (olefins):
1) Alkenes contain carbon-carbon double bonds and are classified as unsaturated hydrocarbons. Common examples include ethylene and propene.
2) Alkenes undergo characteristic reactions such as addition of halogens, hydrogenation to form alkanes, hydration and polymerization. Many of these reactions follow Markovnikov's rule.
3) Alkenes are industrially important as monomers for polymers like polyethylene, polypropylene, PVC and polystyrene. Ethylene and propylene are the largest volume organic chemicals produced.
This document discusses various topics related to surface chemistry including adsorption, catalysis, and colloids. It begins by defining surface chemistry and adsorption. Important characteristics of adsorption include it being specific and spontaneous. Factors that affect adsorption are then outlined. The document also discusses desorption, sorption, physisorption and chemisorption. It then covers catalysis, including the adsorption theory of heterogeneous catalysis. Finally, it defines and compares true solutions, colloids, and suspensions.
This document provides information about adsorption, including definitions, examples, and applications. It defines adsorption as the accumulation of molecules on a surface, with the adsorbent being the surface and the adsorbate being the accumulated substance. There are two main types of adsorption: physical adsorption via van der Waals forces, and chemical adsorption via chemical bonds. Factors that affect adsorption include properties of the adsorbate and adsorbent, as well as surface area, pressure, and temperature. Common applications of adsorption include decolorization, gas masks, vacuum systems, catalysis, indicators, chromatography, and moisture control.
The document discusses surface chemistry and catalysis. It defines key terms like adsorption, absorption, interface and provides differences between adsorption and absorption. It describes different types of adsorption like physical and chemical adsorption. Factors affecting adsorption like nature of adsorbent and adsorbate, surface area, temperature, pressure are explained. Different models of adsorption isotherms including Freundlich and Langmuir isotherms are introduced.
1. Surface chemistry deals with phenomena that occur at interfaces between different phases such as solid-gas or solid-liquid.
2. Adsorption is the accumulation of molecules of a gas or liquid on the surface of a solid or liquid. It is a surface phenomenon that depends on factors like the surface area and temperature.
3. There are two types of adsorption - physical adsorption (physisorption) which involves weak van der Waals forces, and chemical adsorption (chemisorption) where chemical bonds form between the adsorbate and adsorbent. Chemisorption has a higher enthalpy of adsorption and is more specific and irreversible.
2nd Lecture on Adsorption and Colloids | Chemistry Part II | 11th StdAnsari Usama
The document discusses factors that affect adsorption of gases on solids such as the nature of the adsorbate and adsorbent, surface area, temperature, and pressure. It also lists several applications of adsorption including catalysis, gas masks, controlling humidity, producing high vacuums, separating inert gases, froth floatation processes, using adsorption indicators, and chromatographic analysis. Adsorption is favored at low temperatures and increases with increasing surface area and pressure. Substances with porous structures and large surface areas make effective adsorbents.
This document discusses surface chemistry and adsorption. It begins by defining surface chemistry as phenomena that occur at interfaces between different phases, such as solid-gas interfaces. It then defines adsorption as the accumulation of molecules at surfaces rather than in the bulk of a solid or liquid. Adsorption occurs due to unbalanced attractive forces at surfaces. There are two main types of adsorption: physical adsorption due to weak van der Waals forces, and chemical adsorption where chemical bonds form between adsorbate and adsorbent molecules. The mechanism and factors affecting adsorption are also explained.
Surface chemistry involves absorption and adsorption. Absorption occurs when particles accumulate uniformly throughout a bulk solid, while adsorption occurs when particles accumulate only on the surface. Adsorption involves the formation of new interactions as molecules bind to a surface. It is a spontaneous process characterized by negative enthalpy and entropy. The factors that affect adsorption include surface area, temperature, pressure, and the nature of the gas. Adsorption can be physical (physisorption) or chemical (chemisorption) in nature. Applications of adsorption include producing high vacuums, controlling humidity, removing color from solutions, and enabling heterogeneous catalysis.
Adsorption refers to the binding of molecules or particles to a surface. It is a surface phenomenon where the concentration of a substance is higher at the interface between two phases compared to the bulk phases. Common adsorbents used industrially include activated carbon, silica gel, and alumina due to their large surface areas. Adsorption plays an important role in processes like gas masks, ammonia production, and removing colors from solutions by using adsorbents like charcoal and bone black.
Adsorption refers to the binding of molecules or particles to a surface. It occurs when there is a higher concentration of substances at an interface compared to the bulk phase. Common adsorbents used industrially include activated carbon, silica gel, and alumina due to their large surface areas. Adsorption can be physical or chemical in nature. Physical adsorption involves weak van der Waals forces while chemical adsorption forms chemical bonds. Adsorption finds applications in gas masks, ammonia production, and removing colors from solutions.
1) Adsorption is the accumulation of molecular species on the surface of a solid or liquid rather than in the bulk. The substance accumulating is the adsorbate and the surface it accumulates on is the adsorbent.
2) Adsorption can be physical via weak van der Waals forces (physisorption) or chemical via stronger chemical bonds (chemisorption).
3) The amount of gas adsorbed increases with the adsorbent's surface area and depends on temperature and pressure according to adsorption isotherms like the Freundlich isotherm.
- Adsorption is the accumulation of molecular species at the surface of a solid rather than in the bulk. The substance that accumulates is called the adsorbate and the surface it accumulates on is the adsorbent.
- Adsorption can be physical (physisorption) or chemical (chemisorption). Physisorption involves weak van der Waals forces while chemisorption involves chemical bonding.
- Factors that affect adsorption include the surface area of the adsorbent, temperature, pressure, and the nature of the adsorbate and adsorbent. Freundlich adsorption isotherms describe the relationship between adsorbed substances
Adsorption is the process where a gas or liquid accumulates on the surface of a solid or liquid, forming a film. It occurs due to surface energy - atoms on the surface experience a bond deficiency. There are two types: physisorption, where adsorbate adheres via weak van der Waals forces; and chemisorption, where chemical bonds form. Factors influencing adsorption include surface area, gas nature, temperature, and pressure. Adsorption has applications in vacuum production, gas masks, catalysis, and water purification.
1. Adsorption is a surface phenomenon where adsorbate molecules accumulate on the surface of an adsorbent. It can occur due to unbalanced forces during crystallization, unpaired electrons, or free valencies in solids.
2. There are two types of adsorption - physical adsorption which occurs via weak van der Waals forces and chemisorption which involves chemical bonding. Physical adsorption is reversible and can form multilayers while chemisorption forms a unimolecular layer through stronger bonds.
3. Catalysis involves a substance that increases the rate of a chemical reaction without being consumed. Catalysts function by providing an alternative reaction pathway with lower activation energy through mechanisms
The document discusses surface chemistry concepts including adsorption, catalysis, and colloids. It provides definitions and examples of key terms. For adsorption, it defines adsorbate and adsorbent, and gives examples of physical and chemical adsorption. For catalysis, it distinguishes between homogeneous and heterogeneous catalysis, and discusses properties of solid catalysts including activity and selectivity. It also provides examples of enzyme catalysis. Finally, it defines colloids and classifies them based on the physical state of the dispersed and dispersion phases.
Surface chemistry is the study of processes that occur at the interface between two bulk phases, such as liquid-liquid or gas-liquid interfaces. There are two main types of processes: adsorption, where atoms or molecules adhere to a surface, and absorption, where they enter and spread throughout a bulk phase. Adsorption can be either physical or chemical in nature depending on the strength of interaction between the adsorbate and adsorbent. Equilibrium is established between adsorbed and non-adsorbed species, which can be modeled using adsorption isotherms such as the Langmuir and Freundlich isotherms. Adsorption finds many applications including gas masks, paint manufacturing, sugar clar
1. Adsorption is the accumulation of atoms, molecules, or ions on the surface of an adsorbent material. It is a surface phenomenon where adsorbate adheres to the surface of an adsorbent.
2. Factors that affect adsorption include the nature and surface area of the adsorbent, pressure and temperature of the adsorbate gas, and the affinity between adsorbate and adsorbent.
3. Two main types of adsorption are physical adsorption (physisorption) and chemical adsorption (chemisorption), which differ in their strength of interaction and reversibility.
Adsorption is the adhesion of molecules of gas, liquid, or dissolved solids to a surface. This process creates a film of the adsorbate (the molecules or atoms being accumulated) on the surface of the adsorbent. It differs from absorption, in which a fluid permeates or is dissolved by a liquid or solid.
This document discusses adsorption and adsorption isotherms. It defines adsorption as the accumulation of molecules at a solid surface rather than in the bulk. There are two main types of adsorption: physisorption due to weak van der Waals forces and chemisorption due to chemical bond formation. The document describes several important adsorption isotherms including the Freundlich isotherm, Langmuir isotherm, and BET isotherm. It provides the equations and assumptions for the Freundlich and Langmuir isotherms.
Similar to Detailed lesson plan chapter 5 chemistry class 12th (CBSE) (20)
Creative Restart 2024: Mike Martin - Finding a way around “no”Taste
Ideas that are good for business and good for the world that we live in, are what I’m passionate about.
Some ideas take a year to make, some take 8 years. I want to share two projects that best illustrate this and why it is never good to stop at “no”.
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.pptHenry Hollis
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...EduSkills OECD
Andreas Schleicher, Director of Education and Skills at the OECD presents at the launch of PISA 2022 Volume III - Creative Minds, Creative Schools on 18 June 2024.
How to Manage Reception Report in Odoo 17Celine George
A business may deal with both sales and purchases occasionally. They buy things from vendors and then sell them to their customers. Such dealings can be confusing at times. Because multiple clients may inquire about the same product at the same time, after purchasing those products, customers must be assigned to them. Odoo has a tool called Reception Report that can be used to complete this assignment. By enabling this, a reception report comes automatically after confirming a receipt, from which we can assign products to orders.
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptxCapitolTechU
Slides from a Capitol Technology University webinar held June 20, 2024. The webinar featured Dr. Donovan Wright, presenting on the Department of Defense Digital Transformation.
Information and Communication Technology in EducationMJDuyan
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 2)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐈𝐂𝐓 𝐢𝐧 𝐞𝐝𝐮𝐜𝐚𝐭𝐢𝐨𝐧:
Students will be able to explain the role and impact of Information and Communication Technology (ICT) in education. They will understand how ICT tools, such as computers, the internet, and educational software, enhance learning and teaching processes. By exploring various ICT applications, students will recognize how these technologies facilitate access to information, improve communication, support collaboration, and enable personalized learning experiences.
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐫𝐞𝐥𝐢𝐚𝐛𝐥𝐞 𝐬𝐨𝐮𝐫𝐜𝐞𝐬 𝐨𝐧 𝐭𝐡𝐞 𝐢𝐧𝐭𝐞𝐫𝐧𝐞𝐭:
-Students will be able to discuss what constitutes reliable sources on the internet. They will learn to identify key characteristics of trustworthy information, such as credibility, accuracy, and authority. By examining different types of online sources, students will develop skills to evaluate the reliability of websites and content, ensuring they can distinguish between reputable information and misinformation.
How to Setup Default Value for a Field in Odoo 17Celine George
In Odoo, we can set a default value for a field during the creation of a record for a model. We have many methods in odoo for setting a default value to the field.
Detailed lesson plan chapter 5 chemistry class 12th (CBSE)
1. • CHEMISTRY
• Class XII
• UNIT 5
• SURFACE CHEMISTRY
• LESSON PLANS
• Some of the most important chemical are
produced industrially by means of reactions
that occur on the surfaces of solid catalysts.
Unit -5
SURFACE CHEMISTRY
CLASS XII
CHEMISTRY PART-1
LESSON PLAN
GUNJAN AGARWAL
(CHEMISTRY FACULTY)
2.
3. Objectives
After studying this Unit, pupil should will
be able to
• describe interfacial phenomenon and
its significance;
• define adsorption and classify it into
physical and chemical
adsorption;
• explain mechanism of adsorption;
• explain the factors controlling
adsorption from gases and
solutions on solids;
• explain adsorption results on the basis
of Freundlich
adsorption isotherms;
• appreciate the role of catalysts in
industry;
• enumerate the nature of colloidal
state;
• describe preparation, properties and
purification of colloids;
• classify emulsions and describe their
preparation and
properties;
• describe the phenomenon of gel
formation;
• list the uses of colloids.
4. Period 1: Time 60 Minutes
• CONTENT DELIVERY:
Teachers Role- teacher introduces the topic with a sentence
like “There are several examples, which reveal that the surface of a
solid has the tendency to attract and retain the molecules of the
phase with which it comes into contact. These molecules remain
only at the surface and do not go deeper into the bulk.
• Adsorption:
“The accumulation of molecular species at the
surface rather than in the bulk of a solid or liquid is
termed as adsorption.”
The molecular species or substance, which concentrates or
accumulates at the surface is termed adsorbate and the
material on the surface of which the adsorption takes place is
called adsorbent.
Introduction: 5 minutes
I. Demonstration: In a solution of an
organic dye, say methylene blue, when
activated charcoal is added and the
solution is well shaken, it is observed
that the filtrate turns colourless.
II.Why does the solution become
colourless?
(Students Response- the molecules of
the dye,accumulate on the surface of
charcoal, Teachers Role-Introduce the
term adsorption)
III.In the packets of electronic goods
some silica gel is placed? Why?
(Students response-the water
molecules get adsorbed on the surface
of the gel.
5. Adsorption:
In adsorption, the substance is concentrated only at the surface and does not penetrate through the surface
to the bulk of the adsorbent, while in absorption, the substance is uniformly distributed throughout the bulk
of the solid.
6. Example:
• Mechanism of Adsorption:
Adsorption arises due to the presence of unbalanced or
residual attractive forces at the surface particles of the
adsorbent.
• These forces are responsible for attracting
the adsorbate particles on the surface of adsorbent.
The extent of adsorption(x/m) increases with the
increase of surface area per unit mass of the adsorbent
at a given temperature and pressure.
• Hof adsorption is always -ve:
When a gas is adsorbed, the freedom of movement of its
molecules become restricted.
• Consequently, S is negative. For a process to be spontaneous,
at constant
• Temperature and pressure, G must be negative.
We know, G = H – T S, G can be negative only if H
has sufficiently high negative value as – T S is positive.
Conclusion:
Adsorption occurs at low temperature ( H > T S)
As the adsorption proceeds, H becomes less and less
negative ultimately H becomes equal to T S and G
becomes zero. At this state equilibrium is attained.
i. when a chalk stick is dipped in ink,
the surface retains the colour of the
ink due to adsorption of coloured
molecules while the solvent of the ink
goes deeper into the stick due to
absorption. On breaking the chalk
stick, it is found to be white from
inside.
ii. Water vapours are absorbed by
anhydrous calcium chloride but
adsorbed by silica gel.
NOTE:
“The term sorption is used when both
adsorption and absorption take place
simultaneously.”
7. • If accumulation of gas on the surface of a solid
occurs on account of weak van der Waals’
forces, the adsorption is termed as physical
adsorption or physisorption.
• When the gas molecules or atoms are held to
the solid surface by chemical bonds, the
adsorption is termed
chemical adsorption or chemisorption. The
chemical bonds may be covalent or ionic in
nature.
• Characteristics of physisorption:
• Lack of specificity
• Nature of adsorbate: easily liquefiable gases
(i.e.,with higher critical temperatures) are
readily adsorbed as van der Waals’ forces are
stronger near the critical temperatures.
• iii. Reversible nature:
Solid + Gas l Gas/Solid + Heat
Solid + Gas Gas/Solid + Heat
• The extent of adsorption increases with the
increase of surface area of the adsorbent.
• Enthalpy of adsorption is low (20–40 kJ mol-1)
• Characteristics of chemisorption:
• Chemisorption is highly specific - it occurs only
if there is some possibility of chemical bonding
between adsorbent and adsorbate.
Example: oxygen is adsorbed on metals by
virtue of oxide formation and hydrogen is
adsorbed by transition metals due to hydride
formation.
(ii) Chemisorption is irreversible in nature.
(iii) Chemisorption is also an exothermic process
(iv) Like most chemical changes, chemisorption
adsorption increases with rise of temperature.
Types of Adsorption
8. Physisorption of a gas adsorbed at low temperature may change into chemisorption at a high
temperature.
(v) Usually high pressure is also favourable for chemisorption.
(vi) Like physical adsorption, chemisorption also increases with increase of surface area of the
adsorbent.
(vii) Enthalpy of chemisorption is high (80-240 kJ mol-1) as it involves chemical bond formation.
Homework:
Write four differences between chemisorption and physisorption.
Which gas SO2 (critical temperature 630K), CH4 (critical temperature 190K) or
H2 (critical temperature 33K) shall be adsorbed more by 1g of activated
charcoal?
9. Adsorption isotherm and
isobars:
Adsorption Isobars
The graph of the variation in the amount of gas adsorbed by the adsorbent with temperature at constant
pressure is termed as adsorption isobar.
Adsorption Isotherms
The graph of the variation in the amount of gas adsorbed by the adsorbent with pressure at constant
temperature is termed as adsorption isotherm.
10. Freundlich isotherm:
explains the behavior of adsorption in an approximate manner. The experimental isotherms always seem
to approach saturation at high pressure. This cannot be explained by Freundlich isotherm. Thus, it fails at
high pressure.
The experimental isotherms always seem to approach saturation at high pressure. This cannot be
explained by Freundlich isotherm. Thus, it fails at high pressure.
11. Video link:
1.Adsorption isotherm
https://youtu.be/rP2tQDAOSC0
2. Adsorption and Absorption
https://www.youtube.com/watch?v=djIzXvwIz5U
Adsorption from Solution Phase
The following observations have been made in the case of adsorption from solution phase:
The extent of adsorption decreases with an increase in temperature.
The extent of adsorption increases with an increase of surface area of the adsorbent.
The extent of adsorption depends on the concentration of the solute in solution
The extent of adsorption depends on the nature of the adsorbent and the adsorbate.
Freundlich’s equation describes the behaviour of adsorption from solution by the equation
12. Applications of Adsorption:
(i) Production of high vacuum: The remaining traces of air can be adsorbed by charcoal from a vessel
evacuated by a vacuum pump to give a very high vacuum.
(ii) Gas mask (a device which consists of activated charcoal or mixture of adsorbents) is usually used for
breathing in coal mines to adsorb poisonous gases.
(iii) Silica and aluminium gels are used as adsorbents for removing moisture and controlling humidity.
(iv) Removal of colouring matter from solutions using animal charcoal.
(v) As Hetergeneous catalyst: Manufacture of ammonia using iron (Fe) as a catalyst, manufacture of H2SO4 by
contact process and use of finely divided nickel in the
hydrogenation of oils are examples of heterogeneous catalysis.
(vi) Due to the difference in degree of adsorption of gases by charcoal, a mixture of noble gases can be
separated by adsorption on coconut charcoal at different temperatures.
(vii) A number of drugs are used to kill germs by getting adsorbed on them.
(viii) In Froth floatation process
(ix) Adsorption indicators
(x) Chromatographic analysis.
13. ASSIGNMENT:
1.Write any two characteristics of Chemisorption.
2. Why does physisorption decrease with the increase of temperature?
3 Why are powdered substances more effective adsorbents than their crystalline forms?
4.What are the factors which influence the adsorption of a gas on a solid?
5. What do you understand by activation of adsorbent ? How is it achieved.
6. Why is it important to have clean surface in surface studies ?
7.Why is chemisorptions referred to as activated adsorption?
14. Period 2: Time 60 Minutes
• Practice test
10 Marks 30 Minute
• 1 Distinguish between the meaning of the terms adsorption and absorption. Give one example of each.
1
2 Give reason why a finely divided substance is more effective as an adsorbent. 1
3 Why is adsorption always exothermic? 3
• 4 Write four factors which influence the adsorption of a gas on a solid? 4
5 Write the effect of pressure and temperature on the adsorption of gases on solids. 2
6 Write six differences between physisorption and chemisorption? 2
7 What is an adsorption isotherm? Describe Freundlich adsorption isotherm. 3
8 Which of the following graph- A 0r B represents adsorption isotherm for physisorption and
chemisorption 2
16. Period 3: Time 60 Minutes
• III. What is the role of KI?
Students Response- it catalyzes (speeds up) the rate of
decomposition of H2O2.
Teachers Role-That is correct. Today we shall discuss about
the role of adsorption in catalysis.
CONTENT DELIVERY:
Catalysis: Substances, which accelerate the rate of a
chemical reaction and themselves remain chemically
and quantitatively unchanged after the reaction, are
known as catalysts, and the phenomenon is known as
catalysis.
Objectives: at the end of this class
pupil should be able to-
• appreciate the role of catalysts in
industry;
Introduction: 5 minutes
I. Demonstration: watch the video
https://www.youtube.com/watch?v=U
TfMrx7275w
II. what chemical reaction equation
are going on here in terms of atomic
symbol
Students Response- decomposition of
hydrogen peroxide.
17. Examples
Promoters and poisons
Promoters are substances that enhance the activity of a catalyst while poisons decrease
the activity of a catalyst.
Example:
In Haber’s process for manufacture of ammonia, molybdenum (Mo) acts as a promoter for iron(Fe)
catalyst.
18. Homogeneous and Heterogeneous Catalysis
• When the reactants and the catalyst are in the same phase (i.e., liquid or gas), the process is said to be
homogeneous catalysis. The catalytic process in which the reactants and the catalyst are in different
phases is known as heterogeneous catalysis.
• Examples of Homogeneous CatalysisVideo clip:
https://www.youtube.com/watch?v=FSdBB1vBDKY
• SO2 (g)+ O2 (g)+ NO (g) SO3
• II. Hydrolysis of ester
• iii.Hydrolysis of sugar
20. Adsorption Theory of Heterogeneous Catalysis Show the following
cliphttps://www.youtube.com/watch?v=CjMwTA597Og
The reactants in gaseous state or in solutions, are adsorbed on the
surface of the solid catalyst. The increase in concentration of the
reactants on the surface increases the rate of reaction. Adsorption being
an exothermic process, the heat of adsorption is utilised in
enhancing the rate of the reaction.
21. Mechanism of Adsorption
The mechanism involves five steps:
• Diffusion of reactants to the surface of the catalyst.
• Adsorption of reactant molecules on the surface of the catalyst.
• Occurrence of chemical reaction on the catalyst’s surface through formation of an
intermediate .
• Desorption of reaction products from the catalyst surface, and thereby, making the
surface available again for more reaction to occur.
• Diffusion of reaction products away from the catalyst’s surface. The surface of the
catalyst unlike the inner part of the bulk, has free valencies which provide the seat
for chemical forces of attraction.
22.
23.
24. Shape Selective Catalysis by Zeolites The catalytic reaction that depends upon
the pore structure of the catalyst and the size of the reactant and product molecules
is called shape-selective catalysis.
Example: Zeolites are good shape-selective catalysts because of their
honeycomb-like structures.
Nature of Zeolite: They are microporous aluminosilicates with three dimensional
network of Al–O–Si framework. The reactions taking place in zeolites depend upon
the size and shape of reactant and product molecules as well as upon the pores and
cavities of the zeolites.
What is ZSM 5? What is its use?
ZSM 5 is zeolite sieves with molecular porosity 5.
Use: It is used as catalysts in petrochemical industries to convert alcohols directly
into gasoline (petrol) by dehydrating them to give a mixture of hydrocarbons.
25. Enzyme Catalysis
6. In stomach, the pepsin enzyme converts proteins into
peptides while in intestine, the pancreatic trypsin converts
proteins into amino acids by hydrolysis.
7. Conversion of milk into curd is an brought about by lacto
bacilli enzyme present in curd.
Characteristics of enzyme catalysis:
(i) Most highly efficient:
(ii) Highly specific nature:
(iii) Highly active under optimum temperature: The
optimum temperature range for enzymatic activity is
298-310K. Human body temperature being
310 K is suited for enzyme-catalysed reactions.
(iv) Highly active under optimum pH (between pH 5-7)
(v) Increasing activity in presence of activators and coenzymes:
(vi) Influence of inhibitors and poisons.
They are protein molecules of high
molecular mass and are very effective
biological catalysts.
Examples:
1. The invertase enzyme converts cane
sugar into glucose and fructose. The
process is called Inversion.
2. The zymase enzyme converts glucose
into ethyl alcohol and carbon dioxide.
3. The diastase enzyme converts starch
into maltose.
4. The maltase enzyme converts maltose
into glucose.
5. Decomposition of urea into ammonia
and carbon dioxide is catalyzed by the
enzyme urease.
27. Home work assignment
• 1. Give four examples of heterogeneous catalysis.
2. What do you mean by activity and selectivity of catalysts?
3. What is shape selective catalysis?
4.What do you mean by ZSM-5? What is its use?
5. What is done to reduce pollution by carbon monoxide or nitric oxide etc. Formed during
combustion of fuels in automobiles ?
28. Period 4: Time 60 Minutes
Objectives: at the end of this class pupil
should be able to –enumerate the nature of
colloidal state describe different ways of
classification of colloids
Introduction: 5 minutes
I. Show the following video clip
https://www.youtube.com/watch?v=l_Pj5_MWSSA
Teachers -Give more examples of colloids
Students response: students site many
examples of colloids.
CONTENT DELIVERY:
A colloid is a heterogeneous system in which
one substance is dispersed (dispersed phase)
as very fine particles in another substance
called dispersion medium. Differences
between true solution, suspension and
colloids.
https://www.youtube.com/watch?v=LhFRsGq6KjY
Classification of Colloids
Classification Based on Physical State
of Dispersed Phase and Dispersion
Medium
29. Classification Based on Nature of Interaction
between Dispersed Phase and Dispersion Medium-
(i) Lyophilic colloids (ii) Lyophobic colloids
(i)Lyophilic colloids:
The word ‘lyophilic’ means liquid-loving. Colloidal Can be formed directly formed by mixing
substances like gum, gelatine, starch, rubber, etc., with a suitable liquid (the dispersion medium
These are reversible sols.
These sols are quite stable and cannot be easily coagulated
(ii)Lyophobic colloids:
The word ‘lyophobic’ means liquid-hating.
These colloidal sols can be prepared only by special methods
Such sols are called lyophobic sols.
These sols are readily precipitated (or coagulated) on the addition of small amounts of
electrolytes, by heating or by shaking and hence, are not stable.
These are irreversible sols, once precipitated,they do not give back the colloidal sol by simple
addition of the dispersion medium.
Lyophobic sols need stabilizing agents for their preservation.
30. Classification Based on Type of Particles of the
Dispersed Phase-
1. Multimolecular colloids: On dissolution, a large numberof atoms or smaller molecules of a
substance aggregate together to form species having size in the colloidal range (1–1000
nm).
Example: gold sol, Sulphur sol
2.Macromolecular colloids: Macromolecules in suitable solvents form solutions in which the size
of the macromolecules is in the colloidal range. These colloids are quite stable.
Examples: starch, cellulose, proteins, enzymes; polythene, nylon, polystyrene, synthetic
rubber, etc. In suitable dispersion medium.
3. Associated colloids (Micelles): There are some substances which at low concentrations behave
as normal strong electrolytes, but at higher concentrations exhibit colloidal behaviour due
to the formation of aggregates. The aggregated particles thus formed are called micelles.
These are also known as associated colloids.
31. The formation of micelles takes place only above a particular temperature called Kraft
temperature (T) and above a particular concentration called critical micelle concentration (CMC).
On dilution, these colloids revert back to individual ions.
Example: Surface active agents such as soaps and synthetic detergents belong to this class.
Mechanism of micelle formation
https://www.youtube.com/watch?v=Nxkjn-XhgE0
(a) Arrangement of stearate ions on the surface of water at low concentrations of soap
(b) Arrangement of stearate ions inside the bulk of water (ionic micelle) at critical micelle
concentrations of soap.
32. Cleansing action of soaps
(a) Grease on cloth
(b) Stearate ions arranging around the grease droplet and
(c) Grease droplet surrounded by stearate ions (micelle formed)
Chemistry of soap & Emulsification
https://www.youtube.com/watch?v=ZMhyD-wUPjo
35. HOME ASSIGNMENT
I. How are the colloidal solutions classified on the basis of physical states of the dispersed
phase and dispersion medium?
II.What are lyophilic and lyophobic sols? Give one example of each type. Why are hydrophobic
sols easily coagulated?
III. What is the difference between multimolecular and macromolecular colloids? Give one
example of each. How are associated colloids different from these two types of colloids?
IV. How are colloids classified on the basis of-
(i) physical states of components
(ii) nature of dispersed phase and
(iii) interaction between dispersed phase and dispersion medium?
(Iv).What are enzymes? Write in brief the mechanism of enzyme catalysis.
36. Period 5: Time 60 Minutes
Objectives: at the end of this class pupil should be
able to –
describe preparation, properties and
purification of colloids
Introduction: 5 minutes
I. Show the following video clip
https://www.youtube.com/watch?v=l_Pj5_M
WSSA
CONTENT DELIVERY
having learnt the significance of colloids
around us we shall learn the methods of
there preparation-
(a) Chemical methods
Colloidal dispersions can be prepared
by chemical reactions leading to
formation of molecules byi. double
decomposition,
ii. oxidation,
iii. reduction or
iv. hydrolysis.
The molecules produced then aggregate leading to
formation of sols
37. (b) Electrical disintegration or Bredig’s Arc method:
Clip: https://www.youtube.com/watch?v=getKcN4tfwk
(c) Peptization
Peptization may be defined as the process of converting a precipitate into colloidal sol by
shaking it with dispersion medium in the presence of a small amount of electrolyte. The
electrolyte used for this purpose is called peptizing agent.
This method is applied, generally, to convert a freshly prepared precipitate into a colloidal sol.
38. Purification of Colloidal Solutions
The process used for reducing the amount of impurities to a requisite minimum is known as purification of
colloidal solution. The purification of colloidal solution is
carried out by the following mehods:
(i) Dialysis: It is a process of removing a dissolved substance from a colloidal solution by means of diffusion
through a suitable membrane.
(ii) Electro-dialysis: Ordinarily, the process of dialysis is quite slow. It can be made faster by applying an
electric field if the dissolved substance in the impure colloidal solution is only an electrolyte. The process is
then named electrodialysis.
39. (iii) Ultrafiltration: Ultrafiltration is the process of separating the colloidal particles from the
solvent andsoluble solutes present in the colloidal solution by specially prepared filters, which are
permeable to all substances except the colloidal particles. Colloidal particles can pass through
ordinary filter paper because the pores are too large.
However, the pores of filter paper can be reduced in size by impregnating with collodion
solution to stop the flow of colloidal particles. The usual collodion is a 4% solution of
nitrocellulose in a mixture of alcohol and ether. An ultra-filter paper may be prepared by
soaking the filter paper in a collodion solution, hardening by formaldehyde and then finally
drying it.
Thus, by using ultra-filter paper, the colloidal particles are separated from rest of the materials.
Ultrafiltration is a slow process. To speed up the process, pressure or suction is applied. The colloidal
particles left on the ultra-filter paper are then stirred with fresh dispersion medium(solvent) to get a
pure colloidal solution.
Properties of Colloidal Solutions
(i) Colligative properties: Colloidal particles being bigger aggregates, the number of particles in a
colloidal solution is comparatively small as compared to a true solution.
40. (ii) Tyndall effect:
This effect was first observed by Faraday and later studied in detail by Tyndall and is termed as Tyndall
effect. The bright cone of the light is called Tyndall cone. The Tyndall effect is due to the fact that colloidal
particles scatter light in all directions in space. This scattering of light illuminates the path of beam in the
colloidal dispersion. Tyndall effect is observed only when the following two conditions are satisfied.
(i) The diameter of the dispersed particles is not much smaller than the wavelength of the light used; and
(ii) The refractive indices of the dispersed phase and the ispersion medium differ greatly in magnitude.
(iii) The colour of colloidal solution depends on the wavelength of light scattered by the dispersed
particles. The wavelength of light further depends on the size and nature of the particles. The colour of
colloidal solution also changes with the manner in which the observer receives the light. For example, a
mixture of milk and water appears blue when viewed by the reflected light and red when viewed by the
transmitted light. Finest gold sol is red in colour; as the size of particles increases, it appears purple, then
blue and finally golden.
41. Brownian movement: When colloidal solutions are viewed under a powerful ultramicroscope, the
colloidal particles appear to be in a state of continuous zig-zag motion all over the field of view. This motion
was first observed by the British botanist, Robert Brown, and is known as Brownian movement. This motion
is independent of the nature of the colloid but depends on the size of the particles and viscosity of
thesolution. Smaller the size and lesser the viscosity, faster is the motion.
Reason: The Brownian movement has been explained to be due to the unbalanced bombardment of the
particles by the molecules of the dispersion medium. The Brownian movement has a stirring effect which
does not permit the particles to settle and thus, is responsible for the stability of sols
(v) Charge on colloidal particles: Colloidal particles always carry an electric charge. The nature of
this charge is the same on all the particles in a given colloidal solution and may be either positive or negative.
42. Reason: The charge on the sol particles is due to one or more reasons, viz., due to electron capture by sol
particles during electro dispersion of metals, due to preferential adsorption of ions from solution and/or due to
formulation of electrical double layer. The potential difference between the fixed layer and the diffused layer of
opposite charges is called the electro kinetic potential or zeta potential.
(vi) Electrophoresis: When electric potential is applied across two platinum electrodes dipping in a colloidal
solution, the colloidal particles move towards one or the other electrode. The movement of colloidal particles
under an applied electric potential is called electrophoresis.
Positively charged particles move towards the cathode while negatively charged particles move towards the
anode. When electrophoresis is prevented by some suitable means, it is observed that the dispersion medium
begins to move in an electric field. This phenomenon is termed electro osmosis.
(vii) Coagulation or precipitation: The process of settling of colloidal particles is called coagulation or
precipitation of the sol.
It be carried out in the following ways:
(i) By electrophoresis:
(ii) By mixing two oppositely charged sols in almost equal proportions. For example, mixing of hydrated
ferric oxide (+ve sol) and arsenious sulphide (–ve sol) bring them in the precipitated forms. This type of
coagulation is called mutual coagulation.
43. (iii) By boiling: This reduces the charge on the particles and ultimately leads to settling down in the form of
a precipitate.
(iv) By persistent dialysis
(v) By addition of electrolytes: When excess of an electrolyte is added, the colloidal particles are
precipitated. The reason is that colloids interact with ions carrying charge opposite to that present on
themselves. This causes neutralisation leading to their coagulation. The ion responsible for neutralisation of
charge on the particles is called the coagulating ion. A negative ion causes the precipitation of positively
charged sol and vice versa.
Hardy Schulze Rule: the greater the valence of the flocculating ion added, the greater is its power to cause
precipitation. In the coagulation of a negative sol, the flocculating power is in the order:
Similarly, in the coagulation of a positive sol, the flocculating power is in the order:
Coagulation of lyophilic sols
When solvents such as alcohol and acetone are added to
hydrophilic sols, the dehydration of dispersed phase. Under this condition, a small quantity of electrolyte can
bring about coagulation.
Protection of colloids
Lyophilic colloids have a unique property of protecting lyophobic colloids. When a lyophilic sol is added to the
lyophobic sol, the lyophilic particles form a layer around
lyophobic particles and thus protect the latter from electrolytes. Lyophilic colloids used for this purpose are
called protective colloids.
44. HOME WORK ASSIGNMENT
1. Explain what is observed
(i) when a beam of light is passed through a colloidal sol.
(ii) an electrolyte, NaCl is added to hydrated ferric oxide sol.
(iii) electric current is passed through a colloidal sol?
2. Explain the following terms:
(i) Electrophoresis
(ii) Coagulation
(iii) Dialysis
(iv) Tyndall effect.
3.Give specific term to show the effect of the following processes:
(a) Ferric hydroxide is mixed with arsenic sulphide sol.
(b) Ferric chloride solution is mixed with freshly prepared precipitate of ferric hydroxide.
(c) H2S gas is passed through arsenic oxide solution.
(d) A beam of light is passed through arsenic oxide solution.
4.Gelatin is generally added to ice creams. Why ?
5. Why artificial rain can be caused by throwing common salt on the clouds ?
45. LIST OF SOME VIDEOCLIPS:
Preparation of Colloids by Chemical Methods
https://www.youtube.com/watch?v=ODrJ3Az90YM
Preparation of Colloids by Peptization
https://www.youtube.com/watch?v=luQxTHY4eLE
Preparation of Colloids by Electrical Disintegration
https://www.youtube.com/watch?v=grtGzyY9gWo
Purification of Colloidal Solutions
https://www.youtube.com/watch?v=NSDE1mVErVg
Brownian Motion
https://www.youtube.com/watch?v=hyclLi8gHg
46. Period 7: Time 60 Minutes
Types of emulsions-
(i) Oil dispersed in water (O/W type) e.g.; milk, in which liquid fat
is dispersed in water.
(ii) Water dispersed in oil (W/O type) e.g.; vanishing cream in
which oil acts as dispersion medium.
Emulsifying agent:
For stabilization of an emulsion, a third component called
emulsifying agent is usually added. The emulsifying agent
forms an interfacial film between suspended particles and the
medium. The principal emulsifying agents for O/W emulsions
are proteins, gums, natural and synthetic soaps, etc., and for
W/O, heavy metal salts of fatty acids, long chain alcohols,
lampblack, etc.
Characteristics of emulsion:
Emulsions can be diluted with any amount of the dispersion
medium. The dispersed liquid when mixed, forms a separate
layer. The droplets in emulsions are often negatively
charged and can be precipitated by electrolytes.
They also show Brownian movement and Tyndall effect.
Emulsions can be broken into constituent liquids
by heating, freezing, centrifuging, etc.
Objectives: at the end of this class pupil
should be able to –
•classify emulsions and describe their
preparation and properties
•describe the phenomenon of gel
formation
• list the uses of colloids.
What are Emulsions?
Show the following video clip:
https://www.youtube.com/watch?v=bC_c
zAL24zY
Emulsion is a liquid-liquid colloidal
system, i.e., the dispersion of finely
divided droplets in another liquid.
If a mixture of two immiscible or partially
miscible liquids is shaken, a coarse
dispersion of one liquid in the other is
obtained which is called emulsion.
47. (ii) Fog, mist and rain:
(iii) Food articles: Milk, butter, halwa, ice creams, fruit juices, etc.,
(iv) Blood: It is a colloidal solution of an albuminoid substance. The styptic action of alum and
ferric chloride solution is due to coagulation of blood forming a clot which stops further
bleeding.
(v) Soils: Fertile soils are colloidal in nature in which humus acts as a protective colloid.
48. (vi) Formation of delta: River water is a colloidal solution of clay. Sea water contains a number of
electrolytes. When river water meets the sea water, the electrolytes present in sea water coagulate the
colloidal solution of clay resulting in its deposition with the formation of delta.
Applications of colloids: Colloids are widely used in the industry. Following are some examples:
(i) Electrical precipitation of smoke:
(ii) Purification of drinking water:
The water obtained from natural sources often contains suspended impurities.
49. Alum is added to such water to coagulate the suspended impurities and make water fit
for drinking purposes.
(iii) Medicines:
Example-
Argyrol is a silver sol used as an eye lotion
Colloidal antimony is used in curing kalaazar.
Colloidal gold is used for intramuscular injection.
Milk of magnesia, an emulsion, is used for stomach disorders.
Colloidal medicines are more effective because they have large surface area and are therefore easily assimilated.
(iv) Tanning: Animal hides are colloidal in nature. When a hide, which has positively charged particles, is
soaked in tannin, which contains negatively charged colloidal particles, mutual coagulation takes place. This
results in the hardening of leather. This process is termed as tanning. Chromium salts are also used in place of
tannin.
50. (v) Cleansing action of soaps and detergents:
(vi) Photographic plates and films are prepared by coating an emulsion of the light sensitive AgBr in gelatin
over glass plates or celluloid films.
(vii) Latex is a colloidal solution of rubber particles which are negatively charged. Rubber is obtained by
coagulation of latex.
(viii) Industrial products: Paints, inks, synthetic plastics, rubber, graphite lubricants, cement, etc., are all
colloidal solutions.
51. HOME WORK ASSIGNMENTS
1 What are emulsions? What are their different types? Give example of each type.
2 How do emulsifiers stabilise emulsion? Name two emulsifiers.
3 Action of soap is due to emulsification and micelle formation. Comment.
4 Give four uses of emulsions.
5. What type of colloidal sols are formed in the following ?
(i) Sulphur vapours are passed throughh cooled water.
(ii) White of an egg is mixed with water.
(iii) Soap solution.
6. What is common in aqua sols and solid aerosols ? How do they differ ?
7. What happens when persistent dialysis of a colloidal solution is carried out ?
8. Frequently, preparation of a colloid such as a protein can be made more stable if the colloid is dialysed.
Why is this so ?
9. What causes Brownian movement in a colloidal solution ?
10. Why is a colloidal sol stable ?