Data integrity & Ensuring GMP Six Systems Compliance
•
0 likes•131 views
USFDA warning letters to Major Indian Pharma Industries due to poor Data Quality, So register early working on last few seats In Hyderabad, Mumbai & Chandigarh
Report
Share
Report
Share
Download to read offline
Recommended
Data Integrity; Ensuring GMP Six Systems Compliance Pharma Training
As per the USFDA guidelines there are about 38 drugs has banned in India due to poor handling of DATA INTEGRITY SYSTEMS. We at Marcep Inc. proud to announce the need of an hour by organizing the above mentioned training program.
Register early as all the locations are fast filling to avoid disappointment.
Data integrity: TGA expectations
This presentation provides an overview of data integrity and the expectations of the TGA
Troubleshooting of Distillation
Distillation is one of the widely used separation method in most of the chemical process industries. Improper design
/operation & maintenance leads to various troubles like reduced plant capacity, poor quality of separated products,
high energy (utility) consumption, etc.
Regulatory requirements and expectations from us, europe, and other regulator...
Recent Regulatory Audits focused on Data Integrity, Batch Failure Investigations, Deviations and effective
management of Corrective and Preventive Actions (CAPA). The primary objective of this course is to
recognize the value of conducting proper root cause analysis and documenting failure investigations.
Emphasis is placed by using practical, hands-on aspects of how to ensure Data integrity in routinely to
facilitate root cause analysis. Additionally, the course will provide attendees with the principles and
techniques involved in identifying failures and deviations, trending problems and process monitoring team
activities.
Commissioning, Shutdowns and turnarounds
Normal Start up after short Shutdown (Hot Startup)
Re- startup after Long Shutdown (Cold Start)
Normal Shutdowns of Equipment & Units
Impact of changing technology on strategic procurement
A must attend training as the world changes, so must you. Move beyond the conventional, unlocking your procurement power and become more strategic. Evolution is critical to procurement’s survival.
Troubleshooting chemical plants training - Techniques to Identify and Correct...
Aims to develop Conceptual Approach in the participants for Troubleshooting of Chemical Process Industry’s routine problems independently.Marcep Inc. understands that in current economic climate, getting an excellent return on your training investment is critical for all our clients.
Smart instrumentation for process plants training
But what is SMART Instrumentation in the Industry & what is expected from this SMART Instrumentation? Modern
Control Systems & the latest trends, with the discussion on case studies & success stories.
Recommended
Data Integrity; Ensuring GMP Six Systems Compliance Pharma Training
As per the USFDA guidelines there are about 38 drugs has banned in India due to poor handling of DATA INTEGRITY SYSTEMS. We at Marcep Inc. proud to announce the need of an hour by organizing the above mentioned training program.
Register early as all the locations are fast filling to avoid disappointment.
Data integrity: TGA expectations
This presentation provides an overview of data integrity and the expectations of the TGA
Troubleshooting of Distillation
Distillation is one of the widely used separation method in most of the chemical process industries. Improper design
/operation & maintenance leads to various troubles like reduced plant capacity, poor quality of separated products,
high energy (utility) consumption, etc.
Regulatory requirements and expectations from us, europe, and other regulator...
Recent Regulatory Audits focused on Data Integrity, Batch Failure Investigations, Deviations and effective
management of Corrective and Preventive Actions (CAPA). The primary objective of this course is to
recognize the value of conducting proper root cause analysis and documenting failure investigations.
Emphasis is placed by using practical, hands-on aspects of how to ensure Data integrity in routinely to
facilitate root cause analysis. Additionally, the course will provide attendees with the principles and
techniques involved in identifying failures and deviations, trending problems and process monitoring team
activities.
Commissioning, Shutdowns and turnarounds
Normal Start up after short Shutdown (Hot Startup)
Re- startup after Long Shutdown (Cold Start)
Normal Shutdowns of Equipment & Units
Impact of changing technology on strategic procurement
A must attend training as the world changes, so must you. Move beyond the conventional, unlocking your procurement power and become more strategic. Evolution is critical to procurement’s survival.
Troubleshooting chemical plants training - Techniques to Identify and Correct...
Aims to develop Conceptual Approach in the participants for Troubleshooting of Chemical Process Industry’s routine problems independently.Marcep Inc. understands that in current economic climate, getting an excellent return on your training investment is critical for all our clients.
Smart instrumentation for process plants training
But what is SMART Instrumentation in the Industry & what is expected from this SMART Instrumentation? Modern
Control Systems & the latest trends, with the discussion on case studies & success stories.
Troubleshooting of Electrical Switchyard & Substation Equipments
AGENDA FOR
TRAINING PROGRAMME ON TROUBLESHOOTING,
OPERATION & MAINTENANCE OF SWITCHYARDS AND SUB-
STATION EQUIPMENT WITH A CURSORY GLANCE ON
TRANSMISSION LINES.
Asset corrosion management cui - masterclass 2018
The course content will cover why CUI has become a major problem in today's context and also cover various
corrosion mechanisms which affect the insulated piping/ equipment and the major parameters which influence the
rate of degradation. The course will cover various NDE methods available and successfully used to detect CUI. The
participant will also learn the strategies for defining scope of work for detecting CUI based on RBI (Risk Based
Inspection) approach. The NACE RP 0198 and API RP 583 will be discussed in detail and so also the leaning from
various published case studies on CUI.
electrical engineering, electrical fire, and safety, electrical safety audits...
electrical engineering, electrical fire, and safety, electrical safety audits, electrical training, for process plants oil and gas
Electrical Fixtures Electrical Fittings
Electrical Fixtures Electrical Fittings
FIXTURE DESIGNING
LUMINAIRE - INDOOR
EXHAUST FANS
FANS
Illuminance guidelines- lux levels
Quality of light/ CRI - Selection of luminaire & lamp
Lux/ Illuminance level
Good lighting essential to perform visual tasks & increase productivity
But how much is good
Lux levels prescribed by BIS 3646 & SP-32, CIE (Commission International de l’Eclairage) & IES (Illuminating Engineers Society)
Quality of light - Colour Rendering Index
Colour is the interaction between
Light source/ reflector/ transmitter
our ability to detect the colour.
Colour cannot be perceived without light.
Electrical Plan Electrical System Electrical Design
The electric power in the form of alternating current is
Generated
Transmitted
Distributed.
Produced at the power stations near pitheads in remote areas.
Generating voltage is stepped up to high voltage for transmission.
Power evacuation from generating s/s - the network of transmission & transformation.
Transformation at Various load centers for further distribution/ utilization By assembly of the set of suitable equipment called Substation.
Compressor Master Class
For technical services and project people, the course gives an in site into the right selection of a machine, How to draft a
procurement specification of a compressor. They are exposed to the method of performance evaluation, understanding
performance curves operational issues like parallel operation and evaluate the machine performance from site operating data.
For Operational people, this course gives an exposure to understand surging, choking and off design operation of the
machine. Operational care required for the typical services will help them to understand the more reliable operation and help
them to take immediate corrective actions.
For maintenance people. they will get an exposure to the constructional aspects and help them to ensure proper assembly and diagnose the mechanical problems and those of the operational problems caused by mechanical malfunctioning.
Advance electrical and installation safety 2017
Advance electrical and installation safety training in Mumbai Kolkata in India
Safety in operation and maintenance
5. Safety regulations in India
6. Case Studies & Group Discussions
Direct and indirect effects of lightning
Assessment of lightning risk as per IS 2309.
Lightning protection systems design – Rolling sphere method
Surge protection concepts.
Importance of insulation for safety
Ingress protection
Introduction to Internal Arc classified (IAC) switchgear
General principles of Hazardous area classification as per IS 5572 and IEC.
Risk assessment methodology.
Selection of electrical equipment and other safety measures for hazardous areas
Procedures for safe working in electrical installations- PTW and LOTO, precautions before and after
maintenance.
The role of PPE – electrically rated PPE.
Safe handling of portable tools.
Safety in inspection, erection and commissioning –hazard identification (JHA), risk assessment and SOPs.
CEA, NEC, OISD
Safety Requirements for Industries under the various acts
Selection of Electrical Equipment for Hazardous locations
Potection concepts such as energy limitation, explosion confinement and ignition source isolation .
Types of protection as per IEC 61079
Temporary Electrical Connections.
Role of house keeping in safety
Pharmaceutical qualification and validations training
INTRODUCTION
This summit outlines the general principles and approaches that FDA considers appropriate elements of process validation for the manufacturing of any pharmaceutical product, including APIs or drug item, referred to in this training summit as drugs. This training summit incorporates principles and approaches that all pharmaceutical manufacturers can use to validate manufacturing processes in their respective organizations
after attending the course.
Damage mechanism affecting fixed equipments
This 2-day training consists of an interactive talk with live case studies and video presentation covering an in-depth industry topic. The speaker will cover from the overview of basic corrosion & degradation damage mechanism of equipment to proactive & dynamic approach for optimizing inspection with caution.
Data integrity issues in pharma industry in India
For last four years, Indian pharma industry is struggling with issues in their documentation, lab operations and procedures issues regarding Data integrity and reasons for same are multiple at multiple levels right from Top
management attitude and involvement in such issues.
About 36 warning letters have been issued to Indian companies and asked to get external consultants to resolve such issues by US FDA. This seminar will go through actual issues one by one, will deal will related subjects such as 21 CFR part 11
requirements, computer system validations, OOS issues, good document practices, behavioral and discipline issues also.
It's not enough just to know what is bugging Indian industry, but this seminar will give solutions, suggestions, deterrents to tackle Data integrity issues and hence when participants go back to their workplaces after this seminar they will have much more knowledge and tools to handle Data integrity issues at their workplace.
Achieving excellence in pharma manufacturing plants
Moving to the next level of productive, reliable performance in bio/ pharmaceutical manufacturing requires a
willingness to make changes and create a quality culture.
In any industry, manufacturing or operational excellence can be thought of as efficiency, productivity, and reliability,
with minimized downtime and few product failures. But excellence is an ever-moving target. “Manufacturing
excellence is not just the best way to do it today, but continually improving to the next level,”
Some have the misconception that profitability and quality are mutually exclusive; compliance is costly, and quality
is just too costly. In reality, “quality processes are more profitable. They are more reliable and error free. Yields are
higher, rejects and defects lower,”. Proponents of operational excellence in pharma hope that the industry will move
from a compliance to a quality culture.
What is needed to achieve manufacturing excellence? To perform at six sigma quality levels, says Van Trieste, a
manufacturer must:
Understand and characterize its raw materials, manufacturing processes, and products
Be fully engaged in identifying, monitoring, and controlling variation
Have systems and processes in place that ensure flawless execution during manufacturing
Deliver products in a robust and reliable supply chain.
Advance maintenance & corrosion engineering
ASSESSMENT OF THE GLOBAL COST OF CORROSION
The global cost of corrosion is estimated to be US$2.5 trillion, which is equivalent to 3.4% of the global GDP (2013). By using
available corrosion control practices, it is estimated that savings of between 15 and 35% of the cost of corrosion could be
realized; i.e., between US$375 and $875 billion annually on a global basis. These costs typically do not include individual safety
or environmental consequences. Through near misses, incidents, forced shutdowns (outages), accidents, etc., several
industries have come to realize that lack of corrosion management can be very costly and that, through proper corrosion
management, significant cost savings can be achieved over the lifetime of an asset.
Clean coal technology for power plants
The course will critically examine and concentrate on the following key technologies:
Super critical/ Ultra critical pulverized fuel plants - the effective clean coal technology for new coal- fired plants.
Circulating Fluidised Bed Combustion plants - which an increasing number of companies and utilities are adopting to burn
coal and other solid fuels; Plus Integrated Gasification Combined Cycle plant;
.Examples of these technologies will be provided for existing and planned power plants in the Asia/ Pacific Regions.
This training course will illustrate how the power utility and coal mining industries are leveraging on new technology in clean
coal power generation. Technical and non-technical professionals who require an introduction to the current and future coal
combustion technologies will find this course useful for their projects and future collaborations. This course is broad based to
give you an insight into the exciting new developments that are currently shaping the coal and power generation industries
and markets.
Maintenance contracting & outsourcing
Introduction:
Objective:
Benefits of attending the course:
Learning Outcome:
In a fiercely competitive business environment of today, availability and reliability of productive assets is a key issue.
An emerging trend across industry is - outsourcing maintenance activities to contractors. Maintenance contracts are being used as an effective tool to manage and control the process of outsourcing aiming at deriving an economic and
efficient outcome from the service provider at the agreed levels of responsibility and performance.
To equip practicing managers and professionals with advanced concepts in managing Contracts, different types of
contracts and their application, learn the features, functions and benefits of Maintenance Contracts and contemporary
practices, the rationality of outsourcing maintenance and efficient management of a maintenance contract.
The course takes a wide sweep of Maintenance Contracts and Outsourcing activities.
This seminar introduces participants to the skills and knowledge areas of Maintenance Contracts &
Outsourcing of today, such as:
Understanding Outsourcing considerations
Contracting types, including Service Level Agreements (SLA)
Key Performance Indicators to monitor performance
Developing contracts – the contracting cycle
Negotiating skills
Continuous improvement and performance management: how to evaluate the performance with all parties involved
This training course will help to understand:
The issues and considerations for a rational decision-making on outsourcing maintenance
The process of selection of contractor, develop and negotiate a maintenance contract, defining of service levels,
monitoring and evaluation of the contractor performance
The types of contracts and a better understanding of the existing contracts used in your organization
A set of lectures, interactive discussions and group activity equip you with the tools to improve your contract
management skills
The knowledge of the concepts learned will help them improve the productivity of operations contributing to corporate
success
Water Chemistry
“To familiarize the participants about the developments in the Water Chemistry, Corrosion Assessment and Control”.
With the cost of Corrosion worldwide being over US $ one trillion today, it is felt that at least a third of this cost can be
saved by proper awareness and application of Corrosion control technologies & processes in our routine working
environment and from the design stage itself. Corrosion is one of the major reasons of plant outages and reduction in
availability, reliability & performance of the industrial units. Further with declining availability of quality & quantity of
water for power generation, efforts are continuously being made to identify water reuse/recycling at power plants and
aim towards zero liquid discharge. The Workshop intends to provide an insight into Corrosion & Corrosion Control
Processes and Concepts of Water & Waste Water Management at power plants. Workshop is based on experiences of many power plants & Industries and increase awareness about the advancements in the field.
Learning Outcomes:
At the end of this program, the participant shall be able to:
Familiarize about various Power Plant treatment processes and their importance
Conceptualize the basics of Corrosion Processes and its control Get an overview of Corrosion issues in power plants
Familiarize with Principles of Cooling Water Treatments
Experience sharing on real life Problems of Corrosion & Corrosion Control in power plants Conceptualize Water and Water/Waste Water Management
Mining india Forum 2016
Do you know?
Mining Feasibility & Financial Analysis Techniques for Mining Projects
For registration & enquiries contact us on: info@marcepinc.com or call us on: 022- 30210100
DAY ONE
I - Basics of Geology and Mineral Deposits: Covering different aspects of geology in relation to mining
II - Exploration and Assessment of a Mineral Resource: Methods and techniques of surface and subsurface exploration
and testing; Technical analysis of the exploration data in the backdrop of geological setting, detailed geology, structure and
mineralization, ore body definition with details of the mineral target zones for mining, estimation of resource, reserve and grade and
use of geostatistics and software
III - Mining Regulations: In India and the emerging scenario in the wake the new National Mineral Policy and the amendments to
the relevant Rules; Reporting standards/ codes in different countries in general and the UNFC code followed in India in particular;
An insight in to the best practices on evaluation and reporting with an international flavor
IV A - Mining and Mineral Processing: Methods of mining, planning and mine design, year wise production scheduling, mine
development, mining operations; Geotechnical and geohydrological aspects; Disaster management; Waste management
IV B - Mineral processing/ metallurgy: Mineral processing methods and techniques to recover the metals/ minerals from the
ROM of ores/ minerals including flow sheet development and a glimpse of economics of recovery of mineral/ ore recovery
1st Session (Pre- lunch)
2nd Session (Post- lunch)
India has vast minerals potential with mining leases granted for longer durations of 50 years
The demand of various metals and minerals will grow substantially over the next 15 years.
The Power and Cement industries also aid growth in the metal and mining sector.
India’s strategic location enables convenient exports.
India’s per capital steel consumption is four time lower than the global average.
India has the world’s 8th largest reserve base of bauxite and 6th largest base of iron ore, accounting for
about 5% and 8% respectively of total world production.
India is 4th largest iron ore producer in the world and 5th largest bauxite ore producer in the world
O&M and Troubleshooting Hydro Power Plants
Today's biggest for Hydro Power Plants O&M issues
Operations and maintenance personnel at hydroelectric facilities face significant issues. Among these is
the fact that these facilities are aging at the same time that technology is changing substantially. In
addition, at many older hydro plants, equipment may be upgraded a piece at a time. Over the years, this
means a facility can contain a mix of old and new equipment, which may have different operational and/or
maintenance requirements.
In addition, the hydroelectric plant workforce is aging, which causes a two-fold problem. First, these older
plants need significant upgrade work at the same time as many experienced personnel are planning their
retirements. Second, retiring employees are taking with them valuable expertise, with little time available to
transfer this experiential learning to the next generation of plant workers.
Public Private Partnership India 2016 Training
The objective of this course is to provide participants with a comprehensive understanding of the key elements to
design, develop, and monitor PPP programs and contracts in a variety of sectors. Key topics covered include: PPP
strategies and structuring options; pre-feasibility and screening processes; financial and contractual planning;
procurement, negotiation and monitoring procedures/processes; and institutional requirements, including PPP unit
creations.
Through presentations, case studies, simulated exercises and on-site meetings with leading legal, financial and
institutional PPP experts, participants will gain new knowledge and skills that will enable them to develop their own
PPP Action Plan.
Learning Outcomes:
Illustrating how to design, implement and monitor a PPP program
Illustrating the art of determining “value for money” and design a “cost comparator” model to evaluate PPP options
Analyzing best practices in conducting financial, economical and technical feasibility studies
Analyzing case study experiences in structuring bankable PPP deals
Evaluating risk identification, mitigation and allocation among parties involved in a PPP project
Engaging in a simulated PPP pre-feasibility analysis, a simulated PPP transaction negotiation or simulated PPP monitoring
exercise
Creating your own PPP Action Plan to implement on-the-job
Use your new laptop computer for Internet research, access to course materials during and after course, case study analysis,
simulation exercises and to create your own Action Plan
Networking and building professional relationships with your fellow participants and leading PPP specialists, regulators, bankers
and attorneys
Target Audience:
Government Audience: Key decision makers across municipal, state and federal levels of governments including public agencies
focused on economical development, public-planning, finance, procurement, transportation, and infrastructure.
Private Sector Audience: C- level executives, presidents, vice presidents, business development leaders, and managing
directors.
This training is suitable for anyone with a general interest in PPP’s and desire to increase their understanding about PPP’s. The course provides insight into key concepts and issues in developing, procuring and implementing PPP’s.
Plant Safety Audits & Process Safety Management
The Problem
Unexpected releases of toxic, reactive, or flammable liquids and gases in processes involving highly hazardous chemicals have been reported for many years. Incidents continue to occur in various industries that use highly hazardous chemicals which may be toxic, reactive, flammable, or explosive, or may exhibit a combination of these properties. Regardless of the industry that uses these highly hazardous chemicals, there is a potential for an accidental release any time they are not properly controlled. This, in turn, creates the possibility of disaster.
Process Safety Management
The Problem
Unexpected releases of toxic, reactive, or flammable liquids and gases in processes involving highly hazardous chemicals have been reported for many years. Incidents continue to occur in various industries that use highly hazardous chemicals which may be toxic, reactive, flammable, or explosive, or may exhibit a combination of these properties. Regardless of the industry that uses these highly hazardous chemicals, there is a potential for an accidental release any time they are not properly controlled. This, in turn, creates the possibility of disaster.
ANATOMY AND PHYSIOLOGY OF URINARY SYSTEM.pptx
Valuable Content of Human Anatomy and Physiology of Urinary system as per PCI Syllabus for Pharmacy and PharmD Students.
More Related Content
More from Marcep Inc.
Troubleshooting of Electrical Switchyard & Substation Equipments
AGENDA FOR
TRAINING PROGRAMME ON TROUBLESHOOTING,
OPERATION & MAINTENANCE OF SWITCHYARDS AND SUB-
STATION EQUIPMENT WITH A CURSORY GLANCE ON
TRANSMISSION LINES.
Asset corrosion management cui - masterclass 2018
The course content will cover why CUI has become a major problem in today's context and also cover various
corrosion mechanisms which affect the insulated piping/ equipment and the major parameters which influence the
rate of degradation. The course will cover various NDE methods available and successfully used to detect CUI. The
participant will also learn the strategies for defining scope of work for detecting CUI based on RBI (Risk Based
Inspection) approach. The NACE RP 0198 and API RP 583 will be discussed in detail and so also the leaning from
various published case studies on CUI.
electrical engineering, electrical fire, and safety, electrical safety audits...
electrical engineering, electrical fire, and safety, electrical safety audits, electrical training, for process plants oil and gas
Electrical Fixtures Electrical Fittings
Electrical Fixtures Electrical Fittings
FIXTURE DESIGNING
LUMINAIRE - INDOOR
EXHAUST FANS
FANS
Illuminance guidelines- lux levels
Quality of light/ CRI - Selection of luminaire & lamp
Lux/ Illuminance level
Good lighting essential to perform visual tasks & increase productivity
But how much is good
Lux levels prescribed by BIS 3646 & SP-32, CIE (Commission International de l’Eclairage) & IES (Illuminating Engineers Society)
Quality of light - Colour Rendering Index
Colour is the interaction between
Light source/ reflector/ transmitter
our ability to detect the colour.
Colour cannot be perceived without light.
Electrical Plan Electrical System Electrical Design
The electric power in the form of alternating current is
Generated
Transmitted
Distributed.
Produced at the power stations near pitheads in remote areas.
Generating voltage is stepped up to high voltage for transmission.
Power evacuation from generating s/s - the network of transmission & transformation.
Transformation at Various load centers for further distribution/ utilization By assembly of the set of suitable equipment called Substation.
Compressor Master Class
For technical services and project people, the course gives an in site into the right selection of a machine, How to draft a
procurement specification of a compressor. They are exposed to the method of performance evaluation, understanding
performance curves operational issues like parallel operation and evaluate the machine performance from site operating data.
For Operational people, this course gives an exposure to understand surging, choking and off design operation of the
machine. Operational care required for the typical services will help them to understand the more reliable operation and help
them to take immediate corrective actions.
For maintenance people. they will get an exposure to the constructional aspects and help them to ensure proper assembly and diagnose the mechanical problems and those of the operational problems caused by mechanical malfunctioning.
Advance electrical and installation safety 2017
Advance electrical and installation safety training in Mumbai Kolkata in India
Safety in operation and maintenance
5. Safety regulations in India
6. Case Studies & Group Discussions
Direct and indirect effects of lightning
Assessment of lightning risk as per IS 2309.
Lightning protection systems design – Rolling sphere method
Surge protection concepts.
Importance of insulation for safety
Ingress protection
Introduction to Internal Arc classified (IAC) switchgear
General principles of Hazardous area classification as per IS 5572 and IEC.
Risk assessment methodology.
Selection of electrical equipment and other safety measures for hazardous areas
Procedures for safe working in electrical installations- PTW and LOTO, precautions before and after
maintenance.
The role of PPE – electrically rated PPE.
Safe handling of portable tools.
Safety in inspection, erection and commissioning –hazard identification (JHA), risk assessment and SOPs.
CEA, NEC, OISD
Safety Requirements for Industries under the various acts
Selection of Electrical Equipment for Hazardous locations
Potection concepts such as energy limitation, explosion confinement and ignition source isolation .
Types of protection as per IEC 61079
Temporary Electrical Connections.
Role of house keeping in safety
Pharmaceutical qualification and validations training
INTRODUCTION
This summit outlines the general principles and approaches that FDA considers appropriate elements of process validation for the manufacturing of any pharmaceutical product, including APIs or drug item, referred to in this training summit as drugs. This training summit incorporates principles and approaches that all pharmaceutical manufacturers can use to validate manufacturing processes in their respective organizations
after attending the course.
Damage mechanism affecting fixed equipments
This 2-day training consists of an interactive talk with live case studies and video presentation covering an in-depth industry topic. The speaker will cover from the overview of basic corrosion & degradation damage mechanism of equipment to proactive & dynamic approach for optimizing inspection with caution.
Data integrity issues in pharma industry in India
For last four years, Indian pharma industry is struggling with issues in their documentation, lab operations and procedures issues regarding Data integrity and reasons for same are multiple at multiple levels right from Top
management attitude and involvement in such issues.
About 36 warning letters have been issued to Indian companies and asked to get external consultants to resolve such issues by US FDA. This seminar will go through actual issues one by one, will deal will related subjects such as 21 CFR part 11
requirements, computer system validations, OOS issues, good document practices, behavioral and discipline issues also.
It's not enough just to know what is bugging Indian industry, but this seminar will give solutions, suggestions, deterrents to tackle Data integrity issues and hence when participants go back to their workplaces after this seminar they will have much more knowledge and tools to handle Data integrity issues at their workplace.
Achieving excellence in pharma manufacturing plants
Moving to the next level of productive, reliable performance in bio/ pharmaceutical manufacturing requires a
willingness to make changes and create a quality culture.
In any industry, manufacturing or operational excellence can be thought of as efficiency, productivity, and reliability,
with minimized downtime and few product failures. But excellence is an ever-moving target. “Manufacturing
excellence is not just the best way to do it today, but continually improving to the next level,”
Some have the misconception that profitability and quality are mutually exclusive; compliance is costly, and quality
is just too costly. In reality, “quality processes are more profitable. They are more reliable and error free. Yields are
higher, rejects and defects lower,”. Proponents of operational excellence in pharma hope that the industry will move
from a compliance to a quality culture.
What is needed to achieve manufacturing excellence? To perform at six sigma quality levels, says Van Trieste, a
manufacturer must:
Understand and characterize its raw materials, manufacturing processes, and products
Be fully engaged in identifying, monitoring, and controlling variation
Have systems and processes in place that ensure flawless execution during manufacturing
Deliver products in a robust and reliable supply chain.
Advance maintenance & corrosion engineering
ASSESSMENT OF THE GLOBAL COST OF CORROSION
The global cost of corrosion is estimated to be US$2.5 trillion, which is equivalent to 3.4% of the global GDP (2013). By using
available corrosion control practices, it is estimated that savings of between 15 and 35% of the cost of corrosion could be
realized; i.e., between US$375 and $875 billion annually on a global basis. These costs typically do not include individual safety
or environmental consequences. Through near misses, incidents, forced shutdowns (outages), accidents, etc., several
industries have come to realize that lack of corrosion management can be very costly and that, through proper corrosion
management, significant cost savings can be achieved over the lifetime of an asset.
Clean coal technology for power plants
The course will critically examine and concentrate on the following key technologies:
Super critical/ Ultra critical pulverized fuel plants - the effective clean coal technology for new coal- fired plants.
Circulating Fluidised Bed Combustion plants - which an increasing number of companies and utilities are adopting to burn
coal and other solid fuels; Plus Integrated Gasification Combined Cycle plant;
.Examples of these technologies will be provided for existing and planned power plants in the Asia/ Pacific Regions.
This training course will illustrate how the power utility and coal mining industries are leveraging on new technology in clean
coal power generation. Technical and non-technical professionals who require an introduction to the current and future coal
combustion technologies will find this course useful for their projects and future collaborations. This course is broad based to
give you an insight into the exciting new developments that are currently shaping the coal and power generation industries
and markets.
Maintenance contracting & outsourcing
Introduction:
Objective:
Benefits of attending the course:
Learning Outcome:
In a fiercely competitive business environment of today, availability and reliability of productive assets is a key issue.
An emerging trend across industry is - outsourcing maintenance activities to contractors. Maintenance contracts are being used as an effective tool to manage and control the process of outsourcing aiming at deriving an economic and
efficient outcome from the service provider at the agreed levels of responsibility and performance.
To equip practicing managers and professionals with advanced concepts in managing Contracts, different types of
contracts and their application, learn the features, functions and benefits of Maintenance Contracts and contemporary
practices, the rationality of outsourcing maintenance and efficient management of a maintenance contract.
The course takes a wide sweep of Maintenance Contracts and Outsourcing activities.
This seminar introduces participants to the skills and knowledge areas of Maintenance Contracts &
Outsourcing of today, such as:
Understanding Outsourcing considerations
Contracting types, including Service Level Agreements (SLA)
Key Performance Indicators to monitor performance
Developing contracts – the contracting cycle
Negotiating skills
Continuous improvement and performance management: how to evaluate the performance with all parties involved
This training course will help to understand:
The issues and considerations for a rational decision-making on outsourcing maintenance
The process of selection of contractor, develop and negotiate a maintenance contract, defining of service levels,
monitoring and evaluation of the contractor performance
The types of contracts and a better understanding of the existing contracts used in your organization
A set of lectures, interactive discussions and group activity equip you with the tools to improve your contract
management skills
The knowledge of the concepts learned will help them improve the productivity of operations contributing to corporate
success
Water Chemistry
“To familiarize the participants about the developments in the Water Chemistry, Corrosion Assessment and Control”.
With the cost of Corrosion worldwide being over US $ one trillion today, it is felt that at least a third of this cost can be
saved by proper awareness and application of Corrosion control technologies & processes in our routine working
environment and from the design stage itself. Corrosion is one of the major reasons of plant outages and reduction in
availability, reliability & performance of the industrial units. Further with declining availability of quality & quantity of
water for power generation, efforts are continuously being made to identify water reuse/recycling at power plants and
aim towards zero liquid discharge. The Workshop intends to provide an insight into Corrosion & Corrosion Control
Processes and Concepts of Water & Waste Water Management at power plants. Workshop is based on experiences of many power plants & Industries and increase awareness about the advancements in the field.
Learning Outcomes:
At the end of this program, the participant shall be able to:
Familiarize about various Power Plant treatment processes and their importance
Conceptualize the basics of Corrosion Processes and its control Get an overview of Corrosion issues in power plants
Familiarize with Principles of Cooling Water Treatments
Experience sharing on real life Problems of Corrosion & Corrosion Control in power plants Conceptualize Water and Water/Waste Water Management
Mining india Forum 2016
Do you know?
Mining Feasibility & Financial Analysis Techniques for Mining Projects
For registration & enquiries contact us on: info@marcepinc.com or call us on: 022- 30210100
DAY ONE
I - Basics of Geology and Mineral Deposits: Covering different aspects of geology in relation to mining
II - Exploration and Assessment of a Mineral Resource: Methods and techniques of surface and subsurface exploration
and testing; Technical analysis of the exploration data in the backdrop of geological setting, detailed geology, structure and
mineralization, ore body definition with details of the mineral target zones for mining, estimation of resource, reserve and grade and
use of geostatistics and software
III - Mining Regulations: In India and the emerging scenario in the wake the new National Mineral Policy and the amendments to
the relevant Rules; Reporting standards/ codes in different countries in general and the UNFC code followed in India in particular;
An insight in to the best practices on evaluation and reporting with an international flavor
IV A - Mining and Mineral Processing: Methods of mining, planning and mine design, year wise production scheduling, mine
development, mining operations; Geotechnical and geohydrological aspects; Disaster management; Waste management
IV B - Mineral processing/ metallurgy: Mineral processing methods and techniques to recover the metals/ minerals from the
ROM of ores/ minerals including flow sheet development and a glimpse of economics of recovery of mineral/ ore recovery
1st Session (Pre- lunch)
2nd Session (Post- lunch)
India has vast minerals potential with mining leases granted for longer durations of 50 years
The demand of various metals and minerals will grow substantially over the next 15 years.
The Power and Cement industries also aid growth in the metal and mining sector.
India’s strategic location enables convenient exports.
India’s per capital steel consumption is four time lower than the global average.
India has the world’s 8th largest reserve base of bauxite and 6th largest base of iron ore, accounting for
about 5% and 8% respectively of total world production.
India is 4th largest iron ore producer in the world and 5th largest bauxite ore producer in the world
O&M and Troubleshooting Hydro Power Plants
Today's biggest for Hydro Power Plants O&M issues
Operations and maintenance personnel at hydroelectric facilities face significant issues. Among these is
the fact that these facilities are aging at the same time that technology is changing substantially. In
addition, at many older hydro plants, equipment may be upgraded a piece at a time. Over the years, this
means a facility can contain a mix of old and new equipment, which may have different operational and/or
maintenance requirements.
In addition, the hydroelectric plant workforce is aging, which causes a two-fold problem. First, these older
plants need significant upgrade work at the same time as many experienced personnel are planning their
retirements. Second, retiring employees are taking with them valuable expertise, with little time available to
transfer this experiential learning to the next generation of plant workers.
Public Private Partnership India 2016 Training
The objective of this course is to provide participants with a comprehensive understanding of the key elements to
design, develop, and monitor PPP programs and contracts in a variety of sectors. Key topics covered include: PPP
strategies and structuring options; pre-feasibility and screening processes; financial and contractual planning;
procurement, negotiation and monitoring procedures/processes; and institutional requirements, including PPP unit
creations.
Through presentations, case studies, simulated exercises and on-site meetings with leading legal, financial and
institutional PPP experts, participants will gain new knowledge and skills that will enable them to develop their own
PPP Action Plan.
Learning Outcomes:
Illustrating how to design, implement and monitor a PPP program
Illustrating the art of determining “value for money” and design a “cost comparator” model to evaluate PPP options
Analyzing best practices in conducting financial, economical and technical feasibility studies
Analyzing case study experiences in structuring bankable PPP deals
Evaluating risk identification, mitigation and allocation among parties involved in a PPP project
Engaging in a simulated PPP pre-feasibility analysis, a simulated PPP transaction negotiation or simulated PPP monitoring
exercise
Creating your own PPP Action Plan to implement on-the-job
Use your new laptop computer for Internet research, access to course materials during and after course, case study analysis,
simulation exercises and to create your own Action Plan
Networking and building professional relationships with your fellow participants and leading PPP specialists, regulators, bankers
and attorneys
Target Audience:
Government Audience: Key decision makers across municipal, state and federal levels of governments including public agencies
focused on economical development, public-planning, finance, procurement, transportation, and infrastructure.
Private Sector Audience: C- level executives, presidents, vice presidents, business development leaders, and managing
directors.
This training is suitable for anyone with a general interest in PPP’s and desire to increase their understanding about PPP’s. The course provides insight into key concepts and issues in developing, procuring and implementing PPP’s.
Plant Safety Audits & Process Safety Management
The Problem
Unexpected releases of toxic, reactive, or flammable liquids and gases in processes involving highly hazardous chemicals have been reported for many years. Incidents continue to occur in various industries that use highly hazardous chemicals which may be toxic, reactive, flammable, or explosive, or may exhibit a combination of these properties. Regardless of the industry that uses these highly hazardous chemicals, there is a potential for an accidental release any time they are not properly controlled. This, in turn, creates the possibility of disaster.
Process Safety Management
The Problem
Unexpected releases of toxic, reactive, or flammable liquids and gases in processes involving highly hazardous chemicals have been reported for many years. Incidents continue to occur in various industries that use highly hazardous chemicals which may be toxic, reactive, flammable, or explosive, or may exhibit a combination of these properties. Regardless of the industry that uses these highly hazardous chemicals, there is a potential for an accidental release any time they are not properly controlled. This, in turn, creates the possibility of disaster.
More from Marcep Inc. (20)
Troubleshooting of Electrical Switchyard & Substation Equipments
Troubleshooting of Electrical Switchyard & Substation Equipments
electrical engineering, electrical fire, and safety, electrical safety audits...
electrical engineering, electrical fire, and safety, electrical safety audits...
Electrical Plan Electrical System Electrical Design
Electrical Plan Electrical System Electrical Design
Pharmaceutical qualification and validations training
Pharmaceutical qualification and validations training
Achieving excellence in pharma manufacturing plants
Achieving excellence in pharma manufacturing plants
Recently uploaded
ANATOMY AND PHYSIOLOGY OF URINARY SYSTEM.pptx
Valuable Content of Human Anatomy and Physiology of Urinary system as per PCI Syllabus for Pharmacy and PharmD Students.
ARTIFICIAL INTELLIGENCE IN HEALTHCARE.pdf
Artificial intelligence (AI) refers to the simulation of human intelligence processes by machines, especially computer systems. It encompasses tasks such as learning, reasoning, problem-solving, perception, and language understanding. AI technologies are revolutionizing various fields, from healthcare to finance, by enabling machines to perform tasks that typically require human intelligence.
Report Back from SGO 2024: What’s the Latest in Cervical Cancer?
Are you curious about what’s new in cervical cancer research or unsure what the findings mean? Join Dr. Emily Ko, a gynecologic oncologist at Penn Medicine, to learn about the latest updates from the Society of Gynecologic Oncology (SGO) 2024 Annual Meeting on Women’s Cancer. Dr. Ko will discuss what the research presented at the conference means for you and answer your questions about the new developments.
Evaluation of antidepressant activity of clitoris ternatea in animals
Evaluation of antidepressant activity of clitoris ternatea in animals
Alcohol_Dr. Jeenal Mistry MD Pharmacology.pdf
Ethanol (CH3CH2OH), or beverage alcohol, is a two-carbon alcohol
that is rapidly distributed in the body and brain. Ethanol alters many
neurochemical systems and has rewarding and addictive properties. It
is the oldest recreational drug and likely contributes to more morbidity,
mortality, and public health costs than all illicit drugs combined. The
5th edition of the Diagnostic and Statistical Manual of Mental Disorders
(DSM-5) integrates alcohol abuse and alcohol dependence into a single
disorder called alcohol use disorder (AUD), with mild, moderate,
and severe subclassifications (American Psychiatric Association, 2013).
In the DSM-5, all types of substance abuse and dependence have been
combined into a single substance use disorder (SUD) on a continuum
from mild to severe. A diagnosis of AUD requires that at least two of
the 11 DSM-5 behaviors be present within a 12-month period (mild
AUD: 2–3 criteria; moderate AUD: 4–5 criteria; severe AUD: 6–11 criteria).
The four main behavioral effects of AUD are impaired control over
drinking, negative social consequences, risky use, and altered physiological
effects (tolerance, withdrawal). This chapter presents an overview
of the prevalence and harmful consequences of AUD in the U.S.,
the systemic nature of the disease, neurocircuitry and stages of AUD,
comorbidities, fetal alcohol spectrum disorders, genetic risk factors, and
pharmacotherapies for AUD.
Ozempic: Preoperative Management of Patients on GLP-1 Receptor Agonists
Preoperative Management of Patients on GLP-1 Receptor Agonists like Ozempic and Semiglutide
ASA GUIDELINE
NYSORA Guideline
2 Case Reports of Gastric Ultrasound
KDIGO 2024 guidelines for diabetologists
KDIGO guidelines 2024 for evaluation and management of CKD, related to diabetes and management of diabetic kidney disease
For Better Surat #ℂall #Girl Service ❤85270-49040❤ Surat #ℂall #Girls
For Better Surat #ℂall #Girl Service ❤85270-49040❤ Surat #ℂall #Girls
New Drug Discovery and Development .....
The "New Drug Discovery and Development" process involves the identification, design, testing, and manufacturing of novel pharmaceutical compounds with the aim of introducing new and improved treatments for various medical conditions. This comprehensive endeavor encompasses various stages, including target identification, preclinical studies, clinical trials, regulatory approval, and post-market surveillance. It involves multidisciplinary collaboration among scientists, researchers, clinicians, regulatory experts, and pharmaceutical companies to bring innovative therapies to market and address unmet medical needs.
New Directions in Targeted Therapeutic Approaches for Older Adults With Mantl...
i3 Health is pleased to make the speaker slides from this activity available for use as a non-accredited self-study or teaching resource.
This slide deck presented by Dr. Kami Maddocks, Professor-Clinical in the Division of Hematology and
Associate Division Director for Ambulatory Operations
The Ohio State University Comprehensive Cancer Center, will provide insight into new directions in targeted therapeutic approaches for older adults with mantle cell lymphoma.
STATEMENT OF NEED
Mantle cell lymphoma (MCL) is a rare, aggressive B-cell non-Hodgkin lymphoma (NHL) accounting for 5% to 7% of all lymphomas. Its prognosis ranges from indolent disease that does not require treatment for years to very aggressive disease, which is associated with poor survival (Silkenstedt et al, 2021). Typically, MCL is diagnosed at advanced stage and in older patients who cannot tolerate intensive therapy (NCCN, 2022). Although recent advances have slightly increased remission rates, recurrence and relapse remain very common, leading to a median overall survival between 3 and 6 years (LLS, 2021). Though there are several effective options, progress is still needed towards establishing an accepted frontline approach for MCL (Castellino et al, 2022). Treatment selection and management of MCL are complicated by the heterogeneity of prognosis, advanced age and comorbidities of patients, and lack of an established standard approach for treatment, making it vital that clinicians be familiar with the latest research and advances in this area. In this activity chaired by Michael Wang, MD, Professor in the Department of Lymphoma & Myeloma at MD Anderson Cancer Center, expert faculty will discuss prognostic factors informing treatment, the promising results of recent trials in new therapeutic approaches, and the implications of treatment resistance in therapeutic selection for MCL.
Target Audience
Hematology/oncology fellows, attending faculty, and other health care professionals involved in the treatment of patients with mantle cell lymphoma (MCL).
Learning Objectives
1.) Identify clinical and biological prognostic factors that can guide treatment decision making for older adults with MCL
2.) Evaluate emerging data on targeted therapeutic approaches for treatment-naive and relapsed/refractory MCL and their applicability to older adults
3.) Assess mechanisms of resistance to targeted therapies for MCL and their implications for treatment selection
How STIs Influence the Development of Pelvic Inflammatory Disease.pptx
STIs may cause PID. For the both disease, herbal medicine Fuyan Pill can be a solution.
TEST BANK for Operations Management, 14th Edition by William J. Stevenson, Ve...
TEST BANK for Operations Management, 14th Edition by William J. Stevenson, Verified Chapters 1 - 19, Complete Newest Version.pdf
TEST BANK for Operations Management, 14th Edition by William J. Stevenson, Verified Chapters 1 - 19, Complete Newest Version.pdf
Novas diretrizes da OMS para os cuidados perinatais de mais qualidade
Novas diretrizes da OMS para os cuidados perinatais de mais qualidadeProf. Marcus Renato de Carvalho
Recomendações da OMS sobre cuidados maternos e neonatais para uma experiência pós-natal positiva.
Em consonância com os ODS – Objetivos do Desenvolvimento Sustentável e a Estratégia Global para a Saúde das Mulheres, Crianças e Adolescentes, e aplicando uma abordagem baseada nos direitos humanos, os esforços de cuidados pós-natais devem expandir-se para além da cobertura e da simples sobrevivência, de modo a incluir cuidados de qualidade.
Estas diretrizes visam melhorar a qualidade dos cuidados pós-natais essenciais e de rotina prestados às mulheres e aos recém-nascidos, com o objetivo final de melhorar a saúde e o bem-estar materno e neonatal.
Uma “experiência pós-natal positiva” é um resultado importante para todas as mulheres que dão à luz e para os seus recém-nascidos, estabelecendo as bases para a melhoria da saúde e do bem-estar a curto e longo prazo. Uma experiência pós-natal positiva é definida como aquela em que as mulheres, pessoas que gestam, os recém-nascidos, os casais, os pais, os cuidadores e as famílias recebem informação consistente, garantia e apoio de profissionais de saúde motivados; e onde um sistema de saúde flexível e com recursos reconheça as necessidades das mulheres e dos bebês e respeite o seu contexto cultural.
Estas diretrizes consolidadas apresentam algumas recomendações novas e já bem fundamentadas sobre cuidados pós-natais de rotina para mulheres e neonatos que recebem cuidados no pós-parto em unidades de saúde ou na comunidade, independentemente dos recursos disponíveis.
É fornecido um conjunto abrangente de recomendações para cuidados durante o período puerperal, com ênfase nos cuidados essenciais que todas as mulheres e recém-nascidos devem receber, e com a devida atenção à qualidade dos cuidados; isto é, a entrega e a experiência do cuidado recebido. Estas diretrizes atualizam e ampliam as recomendações da OMS de 2014 sobre cuidados pós-natais da mãe e do recém-nascido e complementam as atuais diretrizes da OMS sobre a gestão de complicações pós-natais.
O estabelecimento da amamentação e o manejo das principais intercorrências é contemplada.
Recomendamos muito.
Vamos discutir essas recomendações no nosso curso de pós-graduação em Aleitamento no Instituto Ciclos.
Esta publicação só está disponível em inglês até o momento.
Prof. Marcus Renato de Carvalho
www.agostodourado.com
micro teaching on communication m.sc nursing.pdf
Microteaching is a unique model of practice teaching. It is a viable instrument for the. desired change in the teaching behavior or the behavior potential which, in specified types of real. classroom situations, tends to facilitate the achievement of specified types of objectives.
Ocular injury ppt Upendra pal optometrist upums saifai etawah
This ppt are composed by upendra pal to provide help future optometrist of india
Recently uploaded (20)
Maxilla, Mandible & Hyoid Bone & Clinical Correlations by Dr. RIG.pptx
Maxilla, Mandible & Hyoid Bone & Clinical Correlations by Dr. RIG.pptx
Report Back from SGO 2024: What’s the Latest in Cervical Cancer?
Report Back from SGO 2024: What’s the Latest in Cervical Cancer?
Evaluation of antidepressant activity of clitoris ternatea in animals
Evaluation of antidepressant activity of clitoris ternatea in animals
Pharynx and Clinical Correlations BY Dr.Rabia Inam Gandapore.pptx
Pharynx and Clinical Correlations BY Dr.Rabia Inam Gandapore.pptx
Ozempic: Preoperative Management of Patients on GLP-1 Receptor Agonists
Ozempic: Preoperative Management of Patients on GLP-1 Receptor Agonists
For Better Surat #ℂall #Girl Service ❤85270-49040❤ Surat #ℂall #Girls
For Better Surat #ℂall #Girl Service ❤85270-49040❤ Surat #ℂall #Girls
New Directions in Targeted Therapeutic Approaches for Older Adults With Mantl...
New Directions in Targeted Therapeutic Approaches for Older Adults With Mantl...
How STIs Influence the Development of Pelvic Inflammatory Disease.pptx
How STIs Influence the Development of Pelvic Inflammatory Disease.pptx
TEST BANK for Operations Management, 14th Edition by William J. Stevenson, Ve...
TEST BANK for Operations Management, 14th Edition by William J. Stevenson, Ve...
Novas diretrizes da OMS para os cuidados perinatais de mais qualidade
Novas diretrizes da OMS para os cuidados perinatais de mais qualidade
Ocular injury ppt Upendra pal optometrist upums saifai etawah
Ocular injury ppt Upendra pal optometrist upums saifai etawah
Data integrity & Ensuring GMP Six Systems Compliance
- 1. nd rd 22 - 23 April 2016 th th 25 - 26 April 2016 th th 29 - 30 April 2016 Hyderabad Mumbai Chandigarh Workshop on : Data Integrity Compliance = Achieving Quality & Compliance Excellence To Meet US FDA, EU & International Regulatory Audit DATA INTEGRITY & ENSURING GMP SIX SYSTEMS COMPLIANCE Registration closing soon seats available: Hyderabad: 05 seats Mumbai: 03 Seats Chandigarh: 07 Seats PHARMA CONCLAVE For Registration contact: Mr. Raj Khanna Tel: 022- 30210100 or Email: rajkhanna@marcepinc.com since: 1980 training the professionals R