Today's biggest for Hydro Power Plants O&M issues
Operations and maintenance personnel at hydroelectric facilities face significant issues. Among these is
the fact that these facilities are aging at the same time that technology is changing substantially. In
addition, at many older hydro plants, equipment may be upgraded a piece at a time. Over the years, this
means a facility can contain a mix of old and new equipment, which may have different operational and/or
maintenance requirements.
In addition, the hydroelectric plant workforce is aging, which causes a two-fold problem. First, these older
plants need significant upgrade work at the same time as many experienced personnel are planning their
retirements. Second, retiring employees are taking with them valuable expertise, with little time available to
transfer this experiential learning to the next generation of plant workers.
Advance electrical and installation safety 2017Marcep Inc.
Advance electrical and installation safety training in Mumbai Kolkata in India
Safety in operation and maintenance
5. Safety regulations in India
6. Case Studies & Group Discussions
Direct and indirect effects of lightning
Assessment of lightning risk as per IS 2309.
Lightning protection systems design – Rolling sphere method
Surge protection concepts.
Importance of insulation for safety
Ingress protection
Introduction to Internal Arc classified (IAC) switchgear
General principles of Hazardous area classification as per IS 5572 and IEC.
Risk assessment methodology.
Selection of electrical equipment and other safety measures for hazardous areas
Procedures for safe working in electrical installations- PTW and LOTO, precautions before and after
maintenance.
The role of PPE – electrically rated PPE.
Safe handling of portable tools.
Safety in inspection, erection and commissioning –hazard identification (JHA), risk assessment and SOPs.
CEA, NEC, OISD
Safety Requirements for Industries under the various acts
Selection of Electrical Equipment for Hazardous locations
Potection concepts such as energy limitation, explosion confinement and ignition source isolation .
Types of protection as per IEC 61079
Temporary Electrical Connections.
Role of house keeping in safety
We all want to support the accomplishment of safe and trouble-free products and processes. Failure Mode and Effects Analysis has the potential to be a powerful reliability tool to reduce product design and manufacturing risk in a cost effective manner. With shorter product development times, tighter budgets and intense global competition, Design for Reliability tools such as FMEA must be applied correctly. Yet in practice, FMEA does not always achieve the expected results. Why is it that some companies have outstanding success in their FMEA application and others do not? What is the difference between well done and poorly done FMEAs? What are the essential elements of an effective FMEA process? These questions and more are answered in these three new short courses on FMEA.
Thermal Power Plants; Coal Properties, Boiler & its AuxiliariesShilpa Vaid
Meet your expectations:
1. Knowledge on performance & importance
2. Knowledge of performance measurement techniques
3. Knowledge of performance computation
4. Knowledge of performance analysis and performance improvement potential.
5. Knowledge on coal quality and their impact on different equipment of power station
6. Coal blending Issues.
Advance electrical and installation safety 2017Marcep Inc.
Advance electrical and installation safety training in Mumbai Kolkata in India
Safety in operation and maintenance
5. Safety regulations in India
6. Case Studies & Group Discussions
Direct and indirect effects of lightning
Assessment of lightning risk as per IS 2309.
Lightning protection systems design – Rolling sphere method
Surge protection concepts.
Importance of insulation for safety
Ingress protection
Introduction to Internal Arc classified (IAC) switchgear
General principles of Hazardous area classification as per IS 5572 and IEC.
Risk assessment methodology.
Selection of electrical equipment and other safety measures for hazardous areas
Procedures for safe working in electrical installations- PTW and LOTO, precautions before and after
maintenance.
The role of PPE – electrically rated PPE.
Safe handling of portable tools.
Safety in inspection, erection and commissioning –hazard identification (JHA), risk assessment and SOPs.
CEA, NEC, OISD
Safety Requirements for Industries under the various acts
Selection of Electrical Equipment for Hazardous locations
Potection concepts such as energy limitation, explosion confinement and ignition source isolation .
Types of protection as per IEC 61079
Temporary Electrical Connections.
Role of house keeping in safety
We all want to support the accomplishment of safe and trouble-free products and processes. Failure Mode and Effects Analysis has the potential to be a powerful reliability tool to reduce product design and manufacturing risk in a cost effective manner. With shorter product development times, tighter budgets and intense global competition, Design for Reliability tools such as FMEA must be applied correctly. Yet in practice, FMEA does not always achieve the expected results. Why is it that some companies have outstanding success in their FMEA application and others do not? What is the difference between well done and poorly done FMEAs? What are the essential elements of an effective FMEA process? These questions and more are answered in these three new short courses on FMEA.
Thermal Power Plants; Coal Properties, Boiler & its AuxiliariesShilpa Vaid
Meet your expectations:
1. Knowledge on performance & importance
2. Knowledge of performance measurement techniques
3. Knowledge of performance computation
4. Knowledge of performance analysis and performance improvement potential.
5. Knowledge on coal quality and their impact on different equipment of power station
6. Coal blending Issues.
"Coal Properties, Boilers & Its Auxiliaries"Raj Khanna
Thermal Power Plants help you to gain:
1. Knowledge on performance & importance
2. Knowledge of performance measurement techniques
3. Knowledge of performance computation
4. Knowledge of performance analysis and performance improvement potential.
5. Knowledge on coal quality and their impact on different equipment of power station
6. Coal blending Issues.
Smart instrumentation for process plants trainingMarcep Inc.
But what is SMART Instrumentation in the Industry & what is expected from this SMART Instrumentation? Modern
Control Systems & the latest trends, with the discussion on case studies & success stories.
Oil Industry Safety Directorate TrainingPharma Garage
Course Benefits:
This two days course has been designed for imparting awareness on Safety in Design, Operation &
Maintenance practices to be adopted by industries, Statutory provisions (PESO)/ OISD) requirements
as per latest standards, and best industry practices in hydrocarbon (mid stream & down stream) sector
Process instrumentation retrofitting, maintenance & troubleshootingMarcep Inc.
Impact Statement: Why you should not miss the event!
• The global process industry loses $20 billion, or five percent of annual production, due to unscheduled downtime and poor quality.*
• ARC estimates that almost 80 percent of these losses are preventable and 40 percent are primarily the result of the operator or human in the loop.
• ARC estimates unplanned downtime accounts for the equivalent of 20 percent of all production in the process industries. A single unplanned
shutdown can wipe out your plant profit for the year.
TRACING CONTROL LOOP PROBLEMS
LOOP MALFUNCTIONS
FIELD CHECKS & PLANT COMMISSIONING
CHECKING DCS AND PLC I/O CARDS
CHECKING A VALVE POSITIONER
CHECKING LOOP ISOLATORS AND VFDS
No unscheduled downtime
Product running at specifications
All instruments, controls, etc. are operating properly
Reduce maintenance cost
Minimize troubleshooting time
Improve employee efficiency
Training Benefits:
Distillation is one of the widely used separation method in most of the chemical process industries. Improper design
/operation & maintenance leads to various troubles like reduced plant capacity, poor quality of separated products,
high energy (utility) consumption, etc.
Regulatory requirements and expectations from us, europe, and other regulator...Marcep Inc.
Recent Regulatory Audits focused on Data Integrity, Batch Failure Investigations, Deviations and effective
management of Corrective and Preventive Actions (CAPA). The primary objective of this course is to
recognize the value of conducting proper root cause analysis and documenting failure investigations.
Emphasis is placed by using practical, hands-on aspects of how to ensure Data integrity in routinely to
facilitate root cause analysis. Additionally, the course will provide attendees with the principles and
techniques involved in identifying failures and deviations, trending problems and process monitoring team
activities.
More Related Content
Similar to O&M and Troubleshooting Hydro Power Plants
"Coal Properties, Boilers & Its Auxiliaries"Raj Khanna
Thermal Power Plants help you to gain:
1. Knowledge on performance & importance
2. Knowledge of performance measurement techniques
3. Knowledge of performance computation
4. Knowledge of performance analysis and performance improvement potential.
5. Knowledge on coal quality and their impact on different equipment of power station
6. Coal blending Issues.
Smart instrumentation for process plants trainingMarcep Inc.
But what is SMART Instrumentation in the Industry & what is expected from this SMART Instrumentation? Modern
Control Systems & the latest trends, with the discussion on case studies & success stories.
Oil Industry Safety Directorate TrainingPharma Garage
Course Benefits:
This two days course has been designed for imparting awareness on Safety in Design, Operation &
Maintenance practices to be adopted by industries, Statutory provisions (PESO)/ OISD) requirements
as per latest standards, and best industry practices in hydrocarbon (mid stream & down stream) sector
Process instrumentation retrofitting, maintenance & troubleshootingMarcep Inc.
Impact Statement: Why you should not miss the event!
• The global process industry loses $20 billion, or five percent of annual production, due to unscheduled downtime and poor quality.*
• ARC estimates that almost 80 percent of these losses are preventable and 40 percent are primarily the result of the operator or human in the loop.
• ARC estimates unplanned downtime accounts for the equivalent of 20 percent of all production in the process industries. A single unplanned
shutdown can wipe out your plant profit for the year.
TRACING CONTROL LOOP PROBLEMS
LOOP MALFUNCTIONS
FIELD CHECKS & PLANT COMMISSIONING
CHECKING DCS AND PLC I/O CARDS
CHECKING A VALVE POSITIONER
CHECKING LOOP ISOLATORS AND VFDS
No unscheduled downtime
Product running at specifications
All instruments, controls, etc. are operating properly
Reduce maintenance cost
Minimize troubleshooting time
Improve employee efficiency
Training Benefits:
Distillation is one of the widely used separation method in most of the chemical process industries. Improper design
/operation & maintenance leads to various troubles like reduced plant capacity, poor quality of separated products,
high energy (utility) consumption, etc.
Regulatory requirements and expectations from us, europe, and other regulator...Marcep Inc.
Recent Regulatory Audits focused on Data Integrity, Batch Failure Investigations, Deviations and effective
management of Corrective and Preventive Actions (CAPA). The primary objective of this course is to
recognize the value of conducting proper root cause analysis and documenting failure investigations.
Emphasis is placed by using practical, hands-on aspects of how to ensure Data integrity in routinely to
facilitate root cause analysis. Additionally, the course will provide attendees with the principles and
techniques involved in identifying failures and deviations, trending problems and process monitoring team
activities.
Impact of changing technology on strategic procurementMarcep Inc.
A must attend training as the world changes, so must you. Move beyond the conventional, unlocking your procurement power and become more strategic. Evolution is critical to procurement’s survival.
Troubleshooting chemical plants training - Techniques to Identify and Correct...Marcep Inc.
Aims to develop Conceptual Approach in the participants for Troubleshooting of Chemical Process Industry’s routine problems independently.Marcep Inc. understands that in current economic climate, getting an excellent return on your training investment is critical for all our clients.
Troubleshooting of Electrical Switchyard & Substation EquipmentsMarcep Inc.
AGENDA FOR
TRAINING PROGRAMME ON TROUBLESHOOTING,
OPERATION & MAINTENANCE OF SWITCHYARDS AND SUB-
STATION EQUIPMENT WITH A CURSORY GLANCE ON
TRANSMISSION LINES.
Asset corrosion management cui - masterclass 2018Marcep Inc.
The course content will cover why CUI has become a major problem in today's context and also cover various
corrosion mechanisms which affect the insulated piping/ equipment and the major parameters which influence the
rate of degradation. The course will cover various NDE methods available and successfully used to detect CUI. The
participant will also learn the strategies for defining scope of work for detecting CUI based on RBI (Risk Based
Inspection) approach. The NACE RP 0198 and API RP 583 will be discussed in detail and so also the leaning from
various published case studies on CUI.
Electrical Fixtures Electrical Fittings Marcep Inc.
Electrical Fixtures Electrical Fittings
FIXTURE DESIGNING
LUMINAIRE - INDOOR
EXHAUST FANS
FANS
Illuminance guidelines- lux levels
Quality of light/ CRI - Selection of luminaire & lamp
Lux/ Illuminance level
Good lighting essential to perform visual tasks & increase productivity
But how much is good
Lux levels prescribed by BIS 3646 & SP-32, CIE (Commission International de l’Eclairage) & IES (Illuminating Engineers Society)
Quality of light - Colour Rendering Index
Colour is the interaction between
Light source/ reflector/ transmitter
our ability to detect the colour.
Colour cannot be perceived without light.
Electrical Plan Electrical System Electrical Design Marcep Inc.
The electric power in the form of alternating current is
Generated
Transmitted
Distributed.
Produced at the power stations near pitheads in remote areas.
Generating voltage is stepped up to high voltage for transmission.
Power evacuation from generating s/s - the network of transmission & transformation.
Transformation at Various load centers for further distribution/ utilization By assembly of the set of suitable equipment called Substation.
For technical services and project people, the course gives an in site into the right selection of a machine, How to draft a
procurement specification of a compressor. They are exposed to the method of performance evaluation, understanding
performance curves operational issues like parallel operation and evaluate the machine performance from site operating data.
For Operational people, this course gives an exposure to understand surging, choking and off design operation of the
machine. Operational care required for the typical services will help them to understand the more reliable operation and help
them to take immediate corrective actions.
For maintenance people. they will get an exposure to the constructional aspects and help them to ensure proper assembly and diagnose the mechanical problems and those of the operational problems caused by mechanical malfunctioning.
Pharmaceutical qualification and validations trainingMarcep Inc.
INTRODUCTION
This summit outlines the general principles and approaches that FDA considers appropriate elements of process validation for the manufacturing of any pharmaceutical product, including APIs or drug item, referred to in this training summit as drugs. This training summit incorporates principles and approaches that all pharmaceutical manufacturers can use to validate manufacturing processes in their respective organizations
after attending the course.
Damage mechanism affecting fixed equipmentsMarcep Inc.
This 2-day training consists of an interactive talk with live case studies and video presentation covering an in-depth industry topic. The speaker will cover from the overview of basic corrosion & degradation damage mechanism of equipment to proactive & dynamic approach for optimizing inspection with caution.
Data integrity issues in pharma industry in IndiaMarcep Inc.
For last four years, Indian pharma industry is struggling with issues in their documentation, lab operations and procedures issues regarding Data integrity and reasons for same are multiple at multiple levels right from Top
management attitude and involvement in such issues.
About 36 warning letters have been issued to Indian companies and asked to get external consultants to resolve such issues by US FDA. This seminar will go through actual issues one by one, will deal will related subjects such as 21 CFR part 11
requirements, computer system validations, OOS issues, good document practices, behavioral and discipline issues also.
It's not enough just to know what is bugging Indian industry, but this seminar will give solutions, suggestions, deterrents to tackle Data integrity issues and hence when participants go back to their workplaces after this seminar they will have much more knowledge and tools to handle Data integrity issues at their workplace.
Achieving excellence in pharma manufacturing plantsMarcep Inc.
Moving to the next level of productive, reliable performance in bio/ pharmaceutical manufacturing requires a
willingness to make changes and create a quality culture.
In any industry, manufacturing or operational excellence can be thought of as efficiency, productivity, and reliability,
with minimized downtime and few product failures. But excellence is an ever-moving target. “Manufacturing
excellence is not just the best way to do it today, but continually improving to the next level,”
Some have the misconception that profitability and quality are mutually exclusive; compliance is costly, and quality
is just too costly. In reality, “quality processes are more profitable. They are more reliable and error free. Yields are
higher, rejects and defects lower,”. Proponents of operational excellence in pharma hope that the industry will move
from a compliance to a quality culture.
What is needed to achieve manufacturing excellence? To perform at six sigma quality levels, says Van Trieste, a
manufacturer must:
Understand and characterize its raw materials, manufacturing processes, and products
Be fully engaged in identifying, monitoring, and controlling variation
Have systems and processes in place that ensure flawless execution during manufacturing
Deliver products in a robust and reliable supply chain.
Advance maintenance & corrosion engineeringMarcep Inc.
ASSESSMENT OF THE GLOBAL COST OF CORROSION
The global cost of corrosion is estimated to be US$2.5 trillion, which is equivalent to 3.4% of the global GDP (2013). By using
available corrosion control practices, it is estimated that savings of between 15 and 35% of the cost of corrosion could be
realized; i.e., between US$375 and $875 billion annually on a global basis. These costs typically do not include individual safety
or environmental consequences. Through near misses, incidents, forced shutdowns (outages), accidents, etc., several
industries have come to realize that lack of corrosion management can be very costly and that, through proper corrosion
management, significant cost savings can be achieved over the lifetime of an asset.
The course will critically examine and concentrate on the following key technologies:
Super critical/ Ultra critical pulverized fuel plants - the effective clean coal technology for new coal- fired plants.
Circulating Fluidised Bed Combustion plants - which an increasing number of companies and utilities are adopting to burn
coal and other solid fuels; Plus Integrated Gasification Combined Cycle plant;
.Examples of these technologies will be provided for existing and planned power plants in the Asia/ Pacific Regions.
This training course will illustrate how the power utility and coal mining industries are leveraging on new technology in clean
coal power generation. Technical and non-technical professionals who require an introduction to the current and future coal
combustion technologies will find this course useful for their projects and future collaborations. This course is broad based to
give you an insight into the exciting new developments that are currently shaping the coal and power generation industries
and markets.
Introduction:
Objective:
Benefits of attending the course:
Learning Outcome:
In a fiercely competitive business environment of today, availability and reliability of productive assets is a key issue.
An emerging trend across industry is - outsourcing maintenance activities to contractors. Maintenance contracts are being used as an effective tool to manage and control the process of outsourcing aiming at deriving an economic and
efficient outcome from the service provider at the agreed levels of responsibility and performance.
To equip practicing managers and professionals with advanced concepts in managing Contracts, different types of
contracts and their application, learn the features, functions and benefits of Maintenance Contracts and contemporary
practices, the rationality of outsourcing maintenance and efficient management of a maintenance contract.
The course takes a wide sweep of Maintenance Contracts and Outsourcing activities.
This seminar introduces participants to the skills and knowledge areas of Maintenance Contracts &
Outsourcing of today, such as:
Understanding Outsourcing considerations
Contracting types, including Service Level Agreements (SLA)
Key Performance Indicators to monitor performance
Developing contracts – the contracting cycle
Negotiating skills
Continuous improvement and performance management: how to evaluate the performance with all parties involved
This training course will help to understand:
The issues and considerations for a rational decision-making on outsourcing maintenance
The process of selection of contractor, develop and negotiate a maintenance contract, defining of service levels,
monitoring and evaluation of the contractor performance
The types of contracts and a better understanding of the existing contracts used in your organization
A set of lectures, interactive discussions and group activity equip you with the tools to improve your contract
management skills
The knowledge of the concepts learned will help them improve the productivity of operations contributing to corporate
success
“To familiarize the participants about the developments in the Water Chemistry, Corrosion Assessment and Control”.
With the cost of Corrosion worldwide being over US $ one trillion today, it is felt that at least a third of this cost can be
saved by proper awareness and application of Corrosion control technologies & processes in our routine working
environment and from the design stage itself. Corrosion is one of the major reasons of plant outages and reduction in
availability, reliability & performance of the industrial units. Further with declining availability of quality & quantity of
water for power generation, efforts are continuously being made to identify water reuse/recycling at power plants and
aim towards zero liquid discharge. The Workshop intends to provide an insight into Corrosion & Corrosion Control
Processes and Concepts of Water & Waste Water Management at power plants. Workshop is based on experiences of many power plants & Industries and increase awareness about the advancements in the field.
Learning Outcomes:
At the end of this program, the participant shall be able to:
Familiarize about various Power Plant treatment processes and their importance
Conceptualize the basics of Corrosion Processes and its control Get an overview of Corrosion issues in power plants
Familiarize with Principles of Cooling Water Treatments
Experience sharing on real life Problems of Corrosion & Corrosion Control in power plants Conceptualize Water and Water/Waste Water Management
Do you know?
Mining Feasibility & Financial Analysis Techniques for Mining Projects
For registration & enquiries contact us on: info@marcepinc.com or call us on: 022- 30210100
DAY ONE
I - Basics of Geology and Mineral Deposits: Covering different aspects of geology in relation to mining
II - Exploration and Assessment of a Mineral Resource: Methods and techniques of surface and subsurface exploration
and testing; Technical analysis of the exploration data in the backdrop of geological setting, detailed geology, structure and
mineralization, ore body definition with details of the mineral target zones for mining, estimation of resource, reserve and grade and
use of geostatistics and software
III - Mining Regulations: In India and the emerging scenario in the wake the new National Mineral Policy and the amendments to
the relevant Rules; Reporting standards/ codes in different countries in general and the UNFC code followed in India in particular;
An insight in to the best practices on evaluation and reporting with an international flavor
IV A - Mining and Mineral Processing: Methods of mining, planning and mine design, year wise production scheduling, mine
development, mining operations; Geotechnical and geohydrological aspects; Disaster management; Waste management
IV B - Mineral processing/ metallurgy: Mineral processing methods and techniques to recover the metals/ minerals from the
ROM of ores/ minerals including flow sheet development and a glimpse of economics of recovery of mineral/ ore recovery
1st Session (Pre- lunch)
2nd Session (Post- lunch)
India has vast minerals potential with mining leases granted for longer durations of 50 years
The demand of various metals and minerals will grow substantially over the next 15 years.
The Power and Cement industries also aid growth in the metal and mining sector.
India’s strategic location enables convenient exports.
India’s per capital steel consumption is four time lower than the global average.
India has the world’s 8th largest reserve base of bauxite and 6th largest base of iron ore, accounting for
about 5% and 8% respectively of total world production.
India is 4th largest iron ore producer in the world and 5th largest bauxite ore producer in the world
Public Private Partnership India 2016 TrainingMarcep Inc.
The objective of this course is to provide participants with a comprehensive understanding of the key elements to
design, develop, and monitor PPP programs and contracts in a variety of sectors. Key topics covered include: PPP
strategies and structuring options; pre-feasibility and screening processes; financial and contractual planning;
procurement, negotiation and monitoring procedures/processes; and institutional requirements, including PPP unit
creations.
Through presentations, case studies, simulated exercises and on-site meetings with leading legal, financial and
institutional PPP experts, participants will gain new knowledge and skills that will enable them to develop their own
PPP Action Plan.
Learning Outcomes:
Illustrating how to design, implement and monitor a PPP program
Illustrating the art of determining “value for money” and design a “cost comparator” model to evaluate PPP options
Analyzing best practices in conducting financial, economical and technical feasibility studies
Analyzing case study experiences in structuring bankable PPP deals
Evaluating risk identification, mitigation and allocation among parties involved in a PPP project
Engaging in a simulated PPP pre-feasibility analysis, a simulated PPP transaction negotiation or simulated PPP monitoring
exercise
Creating your own PPP Action Plan to implement on-the-job
Use your new laptop computer for Internet research, access to course materials during and after course, case study analysis,
simulation exercises and to create your own Action Plan
Networking and building professional relationships with your fellow participants and leading PPP specialists, regulators, bankers
and attorneys
Target Audience:
Government Audience: Key decision makers across municipal, state and federal levels of governments including public agencies
focused on economical development, public-planning, finance, procurement, transportation, and infrastructure.
Private Sector Audience: C- level executives, presidents, vice presidents, business development leaders, and managing
directors.
This training is suitable for anyone with a general interest in PPP’s and desire to increase their understanding about PPP’s. The course provides insight into key concepts and issues in developing, procuring and implementing PPP’s.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
1. HYDEL POWER
AWARENESS
TRAINING
2016
TROUBLESHOOTING
HYDRO POWER
PLANTS
O&MAND
OF
Faculty: Mr. Manoj Kumar Mishra,
Ex. Director Operations
Odisha Hydro Power Plant
th th
28 - 29 September th st
30 Sept. - 01 October
2016 DELHI 2016 HYDERABAD
since: 1980
training the professionals
R
For Registration: Email us on: info@marcepinc.com or Call on: 022 - 30210100
Register 8 delegates and pay for 5
Register 6 delegates and pay for 4
Register 4 delegates and pay for 3
th
Ends at: 16 September 2016
You spoke, we listened.
Group discount now available!
2. Introduction
Experience of running hydropower stations in India has shown that even after careful project planning and
good quality control measures from construction to commissioning, unforeseen problems do occur in
service resulting in unplanned outages / low generation and load shedding etc. This causes disruption to
consumers and reduced cash generation for the operator. A contributing factor to these operational
problems is the fact that hydro power equipment and plant is custom built. The equipment cannot be fully
assembled or tested in a factory before sending it to site. Maintenance activities at predetermined time
intervals are necessary to ensure the following:
Quality and reliable operation of equipment in the service environment through planned, periodic
inspection and checking of components and systems. Together with replacement or rectification of parts
wherever required.
Maximum availability of equipment and a minimum of unplanned shut downs by using planned / periodic
shutdowns to inspect all equipment (serviceable and non-servicable).
Eradication of operational problems by a timely analysis of the cause of faults / problems and replacement
of short term solutions by long lasting and permanent ones.
Challenges
Renewable energy is one of the fastest growing sources of electricity. Hydroelectricity, one of the oldest
methods for generating power, will play a signi cant role in the projected growth of worldwide generation.
Hydroelectric plants have long lifecycles, with some facilities still operating after more than 100 years.
Periodic upgrades to equipment, as well as relicensing, allows utilities to extend the life of a hydro facility
so it can continue to produce electricity well into the future. Additionally, effective management of
hydroelectric or pump storage plant operations ensures the ongoing commercial viability of these assets.
Modernizing hydroelectric or pump storage plants, constructing new sites, and retro fitting good control
facilities for efficient power production affords many benefits, but each has their own challenges with cost,
performance, and risk.
Today's biggest O&M issues
Operations and maintenance personnel at hydroelectric facilities face significant issues. Among these is
the fact that these facilities are aging at the same time that technology is changing substantially. In
addition, at many older hydro plants, equipment may be upgraded a piece at a time. Over the years, this
means a facility can contain a mix of old and new equipment, which may have different operational and/or
maintenance requirements.
In addition, the hydroelectric plant workforce is aging, which causes a two-fold problem. First, these older
plants need significant upgrade work at the same time as many experienced personnel are planning their
retirements. Second, retiring employees are taking with them valuable expertise, with little time available to
transfer this experiential learning to the next generation of plant workers.
Course Director: Mr. Miraj Kumar Mishra
He has around 40 years of experience in the field of Hydro Power Projects from O&M, troubleshooting to
Hydro Power Projects from concept to commissioning. He has served as a CGM Electrical to Director of
Operation level at Odisha Hydro Power Corporation Ltd.
O&M and Troubleshooting of
HYDRO POWER PLANTS
HYDEL POWER
AWARENESS
TRAINING
2016
since: 1980
training the professionals
R
th th
28 - 29 September th st
30 Sept. - 01 October
2016 DELHI 2016 HYDERABAD
http://marcepinc.com info@marcepinc.comTel: 022- 30210100 Fax: 022 - 30210103
3. Energy scenario and reforms in power
sector in India
Modern Concept of Hydro Power Plants
Power Generation Equipments in Hydro
Power Plants
Auxiliaries in Hydro Power Plants
Power Transmission & Switchyards
(India's Energy Production & Resources,
Grim situations, Steps of Reforms, Energy
Conservation Act)
(Hydropower Potential in India, Advantages
of Hydropower, Challenges in Hydropower
Development, Land Acquisition Act, etc)
Forebay and Intake Structures, Head Race
or Intake Conduits, Surge Tank, Turbines
and Generators, Power House, Trail Race
and Draft Tube.
(Turbines and its auxiliaries, Generators
and its auxiliaries, Switchyard Systems,
Lubrication Systems, Drainage Pumps, Air
Compressors, Water Cooling Systems, etc)
Substation, Insulated Switchgear, Circuit
Breaker, Surge Arrest, AVR, Earthing
switch, Voltage Transformer, etc)
Protection & Control Systems
Maintenance schedule and Asset
Management
Operation & Maintenance of Hydro Power
Plants
Problems & Troubleshooting of Hydro
Power Plants
Field case discussion
(Control systems, Standards and codes,
Methods of control, Modern Control systems,
Mechanical & Electrical Protection System,
Protective Relay Technology, Digital control
and protective systems, schematics and
detailed wiring drawings)
Bringing plant assets quickly into operation
and keeping them fit during the operation
phase to maintain/improve plant performance
Reducing maintenance cost, e.g. by enabling
efficient, paperless work flows
Increasing plant availability and reliability, e.g.
through diagnostics and optimization of
scheduled events (such as calibrations)
Supporting compliance with standards and
regulations (e.g. for quality management)
(Preventive Maintenance of Hydro Turbine,
Requirement of effective maintenance, Major
maintenance problems of water turbines,
Preventive Maintenance of Hydro
Generators)
(Risk associated with dams, reservoir
induced seismicity, water logging, silting up of
dams, diplomacy over trans boundary rivers,
etc)
(Addressing issues and challenges in
Hydropower Plants)
HYDEL POWER
AWARENESS
TRAINING
2016
DAY - ONE DAY - TWO
COURSE CONTENT:
O&M and Troubleshooting of
HYDRO POWER PLANTS
http://marcepinc.com info@marcepinc.comTel: 022- 30210100 Fax: 022 - 30210103
th th
28 - 29 September th st
30 Sept. - 01 October
2016 DELHI 2016 HYDERABAD
4. Delegate Registration Form:
Please register the following delegate/s for
(For Additional delegates please photocopy this form)
Organisation Details & Authorization:
I / We Hereby Confirm To The Above And Authorize Our Participants To The Programme. Please Send The Invoice To:
Company Name:
Nominating Authority:
Designation: Email:
Company Postal Address:
Tel No.:
* This Booking is Invalid Without Signature
Signature
Participation Fees Include: Workshop kit Documentation, Refreshment, Luncheon, Certificate Of Participation
NON- RESIDENTIAL PROGRAME
Cell No.:
Marcep Inc. Terms and Conditions
Payment terms - Upon completion and return of the registration form, full payment is required not later
than 5 business days from the date of invoice. Payment must be received prior to the event date. Marcep
Inc. reserves the right to refuse admission to the event if payment has not been received.
Cancellation, postponement and substitution policy - You may substitute delegates at any time by
providing reasonable advance notice to Marcep Inc. In the event that Marcep Inc. postpones an event for
any reason and the delegate is unable to attend on the revised date, you will receive full credit of the
contract fee paid. On mutual agreement, you may use this credit for another Marcep Inc. event which must
occur within one year from the date of postponement. Except as specified above, no credits will be
issued for cancellations. There are no refunds given under any circumstances. Marcep Inc. is not
responsible for any loss or damage as a result of a substitution, alteration or cancellation/ postponement
of an event. Marcep Inc. will not take any liability whatsoever if the event is cancelled, rescheduled or
postponed due to act of God, natural calamities or any other emergencies. Please note that while course
speakers and topics were confirmed at the time of marketing, for circumstances beyond our control, the
organization reserves the right to substitute, alter or cancel the speakers and/or topics Marcep Inc.
reserves the right to alter or modify the speakers and/or topics if necessary without any liability to you
what so ever. Updates on any substitutions or alterations will be provided as soon as possible.
Discounts All 'Early Bird' Discounts require payment at time of registration and before the cut-off date in
order to receive any discount. Offered discounts by Marcep Inc. (including team discounts) must also
require payment at the time of registration. All discount offers will stand cancelled if payment is not
received at the time of registration.
For group nomination reply on:queries
info@marcepinc.com
Payment Terms:
Payment Is Required Within 5 Working Days From the Date
Of Invoice. Account Transfer/Cheque/DD Should Be In Favour
Of “Marcep Inc.” Payable At Par In Mumbai.
Investment fees
01 Delegate - INR: 27,500/- (Base Price)
Additional service tax of 15% is applicable
Sales Hotline No.:
or email: viren@marcepinc.com
09167469140
Marcep Inc.
Campz Landmark Bldg., 103, 1st floor,
Next to Tata Motors Showroom, S.V. Road,
Jogeshwari- West, Mumbai- 400102
Tel: 022- 30210100 Fax: 022- 30210103
info@marcepinc.com
PARTICIPATION DETAILS
Name: Designation: Email: Location:
www.marcepinc.com
since: 1980
R
training the professionals
O&M and Troubleshooting of
HYDRO POWER PLANTS
th th
28 - 29 September th st
30 Sept. - 01 October
2016 DELHI 2016 HYDERABAD