This curriculum vitae outlines Frederick Percy's professional experience and qualifications. He has over 40 years of experience in instrumentation engineering, working on numerous oil and gas projects. He is a member of the Institute of Measurement and Control and holds an HNC in Industrial Measurement and Control. Currently, he works as a senior instrumentation engineer for Mustang Engineering on projects in Norway.
Updated CV Lead QAQC Engineer Acting QaQc ManagerMuhammad Rehman
Muhammad Abdul Rehman is a Lead QA/QC Engineer/Supervisor with over 8 years of experience in oil, gas, and MEP projects. He has worked on numerous projects in Saudi Arabia and the UAE for companies like Saudi Aramco, Sharqawi Contractor, Al-Hassan Engineering, Descon Engineering, and ETA Emirates. His responsibilities have included quality control, inspection, auditing, and ensuring projects meet specifications. He has extensive experience managing QA/QC for electrical, instrumentation, and piping projects on offshore oil rigs, gas plants, and commercial buildings.
I am working to recently Clean Fuels Project KNPC MAB1 (KUWAIT) project. With a back ground of total experience more than 10 years & involved in many complicated multidiscipline Gas Petrochemical Refinery and power Generation Plant, Experience in area of Supervision Quality Inspection, Broad Experience and good knowledge of execution Instrumentation. Installation / Pre-commissioning inspection for each phase of Instrumentation activities as per standard & project specification. Especially Instrument side. Having solid experience as a with the ability to follow the INSTRUMENT QA/QC ENGINEER he procedure ITP to include Site inspection, material equipment’s, instruments final inspection before pre-commissioning good supervision &coordinating with QC Engineer QC Manager within Company & Client.
I have good interpersonal and management skill, discipline, technical knowledge and self-confidence also good team player with excellent health. I thank you for your time& consideration, I can assure you that if given the opportunity, I shall discharge my duties to your satisfaction.
BACKGROUND INCLUDES
o Project Handling and execution
o Site activities Engineer in executing the project
o Technical support activities at site while project execution
o Site design changes as per IFC drawing
PROFESSIONAL SKILLS
o Quality Assurance / Quality Control
o A career span over 12 years experience in Aboard both.
o Strong Analytical, Training Skills and problem solving abilities. An Excellent ability
Mohamad Firoze is applying for a supervisor position with over 11 years of experience in control inspection, QA/QC, and shutdown activities for various oil and gas projects in Saudi Arabia and the Middle East. He has extensive experience managing quality assurance for large projects and supervising inspection teams. Firoze aims to optimize operations through cost-effective measures while maintaining a focus on safety, environmental protection, and profitability.
Responsibilities: E&I QA/QC
Responsibilities for Field Inspection as per Inspection Testing Plan (ITP’s) Related (E&I)
Jobs.QA/QC with the help of specification, drawings.
Inspection for Material Receiving related Electrical, Instrument as per Indent, Delivery
Note.
Inspection for Cable Laying (E & I) in Cable Trays, Trenches as per cross-sectional
drawings.
Inspection for Cable Trays (E&I) Installation (Perforated, Ladder, Mesh) as per drawing.
Responsible for all Red Marks/As Built drawing as per site modification.
Inspection for Lighting Installation as per circuit diagram, Panel Installation,Transformer
installation.
Inspection for Heating Tracing cables and Testing.
Having Good Knowledge of (NEC) National Electrical Code.
American Petroleum Institute (API ) Standards
IEC- international ELECTROTECHNICAL Commission Standards.
Inspection for the Installation of MCT’s.
Inspection for Lightning Protection (Lightning Arresters).
Inspection for EARTHING Cable Laying, CAD Weld - Exothermic Weld joints,
Earth Bus Bar, EARTHING Test.
Inspection for Motor Installation, Resistance/IR test & Motor torque test.
Inspection for Cable Continuity/IR, Cable termination, EARTHING test.
Prepare the NCR, CAR, TQ, ITP, and Method Statements & RFI’S.
Complete QA/QC Documentation as per Project specification.
Inspection for calibration of PI, PDIT, PT, TT, TE, FT, LT.
Functional Test of Ultrasonic Transmitters, LSL, LSH, LSHH, AT.
Inspection for Field Instrument Installation (PT,FT, LT, Control Valves as per Hook up drawing)
Inspection for Impulse Line Leak test.
Inspection for JB’S Installation, Panels, Cabinets Installation.
Preparing the complete Loop Folders like(DI,DO,AI,AO,RTD for Loop Checking Pre-
Commissioning with the attachments of Instrument loop package index, Functional loop test CR,
Material Receiving Calibration CR, Instrument Installation CR Instrument index, instrument Loop
Diagram & P& ID’S.
Responsible for clear the Punch Points.
Prepare the Final Dossier as per client HOS and Hand over to Mechanical Completion
Department (MC)
Final Walk Down of Hand over System (HOS) with Client.
This document provides a summary of qualifications and work experience for an applicant seeking a position as a QA/QC Inspector or Engineer with experience in electrical and instrumentation (E&I) inspections. The applicant has over 12 years of experience in E&I installations, testing, commissioning and inspections in the oil and gas sector in the Middle East. They hold CompEx and ISO 9001:2015 auditor qualifications and have worked on numerous projects involving inspections of equipment such as transformers, switchgear, motors, cables, and instruments.
The candidate is applying for a QA/QC Inspector position with over 11 years of experience in electrical and instrumentation inspections, installations, testing and commissioning in the oil and gas sector in the Middle East. He holds a diploma and bachelor's degree in electrical engineering and has worked on numerous projects for companies in Qatar, Iraq, India, and the UAE, handling inspections and quality control of equipment like transformers, motors, switchgear, cables, instruments, and more.
Roy McCullough has over 40 years of experience in quality control and welding inspection. He holds numerous CSWIP certifications and has worked on major projects for companies like Shell, BP, and ConocoPhillips. His experience includes roles as a senior welding inspector, quality control coordinator, and quality assurance engineer on offshore oil and gas platforms, wind farms, and other large construction projects.
The document provides a resume for Mohammad Hasnat, who has over 14 years of experience as an instrumentation quality and control inspector and engineer. He has worked on numerous projects in Saudi Arabia for companies like Saudi Aramco, conducting inspections and ensuring quality control. His responsibilities included implementing quality plans, inspecting instrumentation installations, preparing reports, and being familiar with international codes and standards. He is seeking new opportunities as an innovative professional who can respond to challenges in the field of instrumentation.
Updated CV Lead QAQC Engineer Acting QaQc ManagerMuhammad Rehman
Muhammad Abdul Rehman is a Lead QA/QC Engineer/Supervisor with over 8 years of experience in oil, gas, and MEP projects. He has worked on numerous projects in Saudi Arabia and the UAE for companies like Saudi Aramco, Sharqawi Contractor, Al-Hassan Engineering, Descon Engineering, and ETA Emirates. His responsibilities have included quality control, inspection, auditing, and ensuring projects meet specifications. He has extensive experience managing QA/QC for electrical, instrumentation, and piping projects on offshore oil rigs, gas plants, and commercial buildings.
I am working to recently Clean Fuels Project KNPC MAB1 (KUWAIT) project. With a back ground of total experience more than 10 years & involved in many complicated multidiscipline Gas Petrochemical Refinery and power Generation Plant, Experience in area of Supervision Quality Inspection, Broad Experience and good knowledge of execution Instrumentation. Installation / Pre-commissioning inspection for each phase of Instrumentation activities as per standard & project specification. Especially Instrument side. Having solid experience as a with the ability to follow the INSTRUMENT QA/QC ENGINEER he procedure ITP to include Site inspection, material equipment’s, instruments final inspection before pre-commissioning good supervision &coordinating with QC Engineer QC Manager within Company & Client.
I have good interpersonal and management skill, discipline, technical knowledge and self-confidence also good team player with excellent health. I thank you for your time& consideration, I can assure you that if given the opportunity, I shall discharge my duties to your satisfaction.
BACKGROUND INCLUDES
o Project Handling and execution
o Site activities Engineer in executing the project
o Technical support activities at site while project execution
o Site design changes as per IFC drawing
PROFESSIONAL SKILLS
o Quality Assurance / Quality Control
o A career span over 12 years experience in Aboard both.
o Strong Analytical, Training Skills and problem solving abilities. An Excellent ability
Mohamad Firoze is applying for a supervisor position with over 11 years of experience in control inspection, QA/QC, and shutdown activities for various oil and gas projects in Saudi Arabia and the Middle East. He has extensive experience managing quality assurance for large projects and supervising inspection teams. Firoze aims to optimize operations through cost-effective measures while maintaining a focus on safety, environmental protection, and profitability.
Responsibilities: E&I QA/QC
Responsibilities for Field Inspection as per Inspection Testing Plan (ITP’s) Related (E&I)
Jobs.QA/QC with the help of specification, drawings.
Inspection for Material Receiving related Electrical, Instrument as per Indent, Delivery
Note.
Inspection for Cable Laying (E & I) in Cable Trays, Trenches as per cross-sectional
drawings.
Inspection for Cable Trays (E&I) Installation (Perforated, Ladder, Mesh) as per drawing.
Responsible for all Red Marks/As Built drawing as per site modification.
Inspection for Lighting Installation as per circuit diagram, Panel Installation,Transformer
installation.
Inspection for Heating Tracing cables and Testing.
Having Good Knowledge of (NEC) National Electrical Code.
American Petroleum Institute (API ) Standards
IEC- international ELECTROTECHNICAL Commission Standards.
Inspection for the Installation of MCT’s.
Inspection for Lightning Protection (Lightning Arresters).
Inspection for EARTHING Cable Laying, CAD Weld - Exothermic Weld joints,
Earth Bus Bar, EARTHING Test.
Inspection for Motor Installation, Resistance/IR test & Motor torque test.
Inspection for Cable Continuity/IR, Cable termination, EARTHING test.
Prepare the NCR, CAR, TQ, ITP, and Method Statements & RFI’S.
Complete QA/QC Documentation as per Project specification.
Inspection for calibration of PI, PDIT, PT, TT, TE, FT, LT.
Functional Test of Ultrasonic Transmitters, LSL, LSH, LSHH, AT.
Inspection for Field Instrument Installation (PT,FT, LT, Control Valves as per Hook up drawing)
Inspection for Impulse Line Leak test.
Inspection for JB’S Installation, Panels, Cabinets Installation.
Preparing the complete Loop Folders like(DI,DO,AI,AO,RTD for Loop Checking Pre-
Commissioning with the attachments of Instrument loop package index, Functional loop test CR,
Material Receiving Calibration CR, Instrument Installation CR Instrument index, instrument Loop
Diagram & P& ID’S.
Responsible for clear the Punch Points.
Prepare the Final Dossier as per client HOS and Hand over to Mechanical Completion
Department (MC)
Final Walk Down of Hand over System (HOS) with Client.
This document provides a summary of qualifications and work experience for an applicant seeking a position as a QA/QC Inspector or Engineer with experience in electrical and instrumentation (E&I) inspections. The applicant has over 12 years of experience in E&I installations, testing, commissioning and inspections in the oil and gas sector in the Middle East. They hold CompEx and ISO 9001:2015 auditor qualifications and have worked on numerous projects involving inspections of equipment such as transformers, switchgear, motors, cables, and instruments.
The candidate is applying for a QA/QC Inspector position with over 11 years of experience in electrical and instrumentation inspections, installations, testing and commissioning in the oil and gas sector in the Middle East. He holds a diploma and bachelor's degree in electrical engineering and has worked on numerous projects for companies in Qatar, Iraq, India, and the UAE, handling inspections and quality control of equipment like transformers, motors, switchgear, cables, instruments, and more.
Roy McCullough has over 40 years of experience in quality control and welding inspection. He holds numerous CSWIP certifications and has worked on major projects for companies like Shell, BP, and ConocoPhillips. His experience includes roles as a senior welding inspector, quality control coordinator, and quality assurance engineer on offshore oil and gas platforms, wind farms, and other large construction projects.
The document provides a resume for Mohammad Hasnat, who has over 14 years of experience as an instrumentation quality and control inspector and engineer. He has worked on numerous projects in Saudi Arabia for companies like Saudi Aramco, conducting inspections and ensuring quality control. His responsibilities included implementing quality plans, inspecting instrumentation installations, preparing reports, and being familiar with international codes and standards. He is seeking new opportunities as an innovative professional who can respond to challenges in the field of instrumentation.
Mohammed Imran Shaikh is applying for a position as a QA/QC Inspector with over 12 years of experience in electrical and instrumentation inspection roles. He currently works as a QC Inspector in Saudi Arabia, where his responsibilities include preparing inspection plans, monitoring construction quality, raising non-compliance reports, and ensuring work meets approved drawings and specifications. Shaikh holds a diploma in electronics and communication technology and has worked on power plant projects in Saudi Arabia, Qatar, and Kuwait.
This curriculum vitae is for Nasim Nizam, who is applying for the position of Senior QA/QC Inspector (E&I). The summary provides details of Nasim's work experience, qualifications, and responsibilities. Nasim has over 5 years of experience in quality assurance and quality control in the construction industry, with a focus on electrical and instrumentation. Nasim is currently working as an E&I QC Inspector at LR2 Laffan Refinery project in Qatar. Prior experience includes working on gas sweetening and refinery projects in Qatar and India. Nasim holds a diploma in instrumentation and computer science. Responsibilities would include inspection and testing according to specifications, ensuring quality plans are followed, and coordinating with
Jeyaraj Selvaraj has over 17 years of experience in electrical and instrumentation inspection, testing, and commissioning for oil, gas, and petrochemical projects. He has worked on projects in Kuwait and Saudi Arabia for companies like Chevron, KOC, SABIC, and SATORP. His experience includes material inspection, installation inspection, factory acceptance testing, site testing, pre-commissioning, and ensuring compliance with quality standards. He is seeking a senior position in project management or inspection.
Having over 6 years of experience as an Instrument QA/QC Engineer in India and abroad, the candidate is fully conversant with international codes and standards. They have experience ensuring electrical and instrumentation systems are installed and tested according to quality procedures and specifications for various oil, gas and petrochemical projects during construction, commissioning and maintenance. The candidate is also proficient with project planning software.
Suresh Kumar Patel has over 11 years of experience in quality assurance and quality control roles in the oil and gas industry. He has expertise in quality management systems, inspection, testing, and commissioning across various offshore and onshore projects. Currently, he works as a Lead Quality Engineer at Certification Engineers International Limited, a subsidiary of Engineers India Limited, where he is responsible for quality planning, project delivery, and technical integration verification on oil and gas projects.
Baijan Savalan _ Avans High School lecture 27.10.16Baijan Savalan
The document provides an overview of process related aspects in offshore oil and gas. It begins with an introduction to offshore oil and gas field layout, including satellite platforms that separate bulk fluids and a central processing platform for finer separation. It then outlines the key process areas in more detail, including gas/liquid separation, water/condensate separation, chemical injection, compression, dehydration, export pipelines, and pigging. The purpose and basic design of equipment for each process area is described.
Sajid Mallick is seeking a position as a QA/QC Inspector or Engineer with experience in electrical and instrumentation. He has over 8 years of experience in various roles in India and the Gulf. He holds a diploma in instrumentation and is proficient in inspection, testing, calibration and ensuring work is completed according to specifications, standards and quality plans. He has worked on projects in Kuwait, Iraq, Qatar and India for oil, gas and industrial facilities.
Kirk Merritt has over 20 years of experience as an electrician, refrigeration and air conditioning mechanic, and project manager. He has worked on both domestic and large commercial projects, and holds several licenses and accreditations including an "A" Grade Electrical Workers License. Kirk is currently a Project Supervisor at Downer Australia, where he oversees project planning, supervision, purchasing, and completion documentation.
This curriculum vitae summarizes Kevin Morton's career experience working on high voltage substation design and engineering projects from 1979 to present. He has held various roles with increasing responsibility in design, project management, and leadership. His most recent role is as a Principal Designer Representative and Lead Engineer for National Grid, overseeing high voltage substation design and construction projects ranging from 132kV to 400kV.
This curriculum vitae provides details about Stewart Kane including his personal information, contact details, qualifications, and work experience. Some key points:
- Stewart Kane is a British instrument technician born in 1955, married with two children, and enjoys golf, music, and computers.
- His qualifications include O Levels from high school in Scotland and various City & Guilds certificates in engineering studies from a Scottish technical college.
- He has over 40 years of experience working in instrumentation and has held roles such as instrument technician, commissioning engineer, and instrument supervisor on projects in the UK, Europe, Middle East, and Asia.
Mohammad Naushad Alam is applying for the position of Instrumentation QA/QC Inspector with over 10 years of experience in instrumentation projects in the Middle East and India. He has experience in instrumentation construction, startup and commissioning for oil and gas projects. His responsibilities have included inspection of instrumentation installation and testing to ensure compliance with quality standards and specifications. He is seeking a growth opportunity with an organization where he can utilize his qualifications and proven track record.
Khaled El-Hag Ahmed Mohamed Zaki provides his contact information and qualifications in electrical engineering and instrumentation. He received a B.S.c in Electrical Engineering from Alexandria University in 2008 and a Master's degree in Communication and Electronics from the same university in 2014. He has over 5 years of experience as an Electrical and Instrumentation Projects Engineer and is currently working as an Instrumentation and Control Systems Engineer at Abu Qir Petroleum Company. His responsibilities include engineering, installation, testing, and commissioning of electrical, instrumentation, and control systems projects in Egypt's oil and gas industry.
Leon Chacon has over 27 years of experience in project management and engineering for oil and gas projects. He has managed numerous large-scale projects involving instrumentation, controls, electrical systems, and IT for companies like Dresser-Rand, PDVSA, and PEMEX. Chacon has extensive experience overseeing all phases of projects from initial planning through implementation and commissioning. He is skilled in areas like project controls, budgeting, scheduling, and ensuring worker safety on industrial sites.
Toni Azar is a 38-year-old Lebanese mechanical engineer with over 15 years of experience managing M&E projects in Qatar and the UAE. He is currently an M&E Project Manager/Construction Manager/Assistant Project Director at Torishima Pump Mfg. Co. Ltd. in Doha, Qatar, where he has managed over 6 pumping station and water network projects since 2006 with contract values totaling over QR 500 million. Previously, he worked as a Project Engineer in Abu Dhabi from 2002-2006 where he managed the mechanical aspects of 5 water and electricity projects. He holds a B.E. in Mechanical Engineering from the Lebanese American University and various safety and ISO certificates.
Mohammad Tanweer is applying for the position of E&I QA/QC Inspector/Supervisor. He has 14 years of experience in instrumentation for oil, gas, and petrochemical plants. His experience includes inspection, testing, commissioning, and maintenance. He is familiar with international engineering standards and protocols for instrumentation systems.
Sajjad Ali Soomro has over 10 years of experience as a QC Civil Inspector in Gulf countries like Qatar, UAE, and Pakistan. He holds a Bachelor's degree in Civil Engineering from N.E.D University in Pakistan. His responsibilities have included inspecting buildings, foundations, concrete works, and ensuring quality standards. Currently he works for Descon Engineering in Qatar as a QC Inspector on Qatar Gas projects, reporting to the QA/QC Engineer and preparing inspection reports. Previously he has worked on oil and gas, commercial, and infrastructure projects in Qatar, Abu Dhabi, and Pakistan.
This resume is for Eduarde P. Lopez, a Filipino male with over 28 years of experience in instrument and electrical engineering design and construction for oil, gas, and power projects. He holds a Bachelor's degree in Electrical Engineering and has worked on projects in Malaysia and the Philippines, holding various roles including instrument engineer, designer, and project management positions. His responsibilities have included design, construction supervision, vendor evaluation, and ensuring safety and quality standards.
Dennis Cutcher has over 30 years of experience in the oil and gas industry, having lived and worked in locations such as New Orleans, Malaysia, Nigeria, Angola, and Houston. He has expertise in production operations, both domestic and international, and regulatory compliance. Cutcher is a motivated self-starter knowledgeable in areas like facility engineering, subsea controls, and safety programs.
Tarun Sharma has over 17 years of experience in mechanical engineering projects for oil and gas companies, specializing in pipe stress design, analysis, and implementation using software like CAESAR II. He has experience leading teams of stress engineers and delivering projects on time. His skills include stress analysis, coordination, review of vendor documents, stress critical line identification, and stress report preparation. He provides expertise in areas like buried lines, jacketed lines, pipe support design, and software like CAESAR II, Navisworks, and SmartPlant Review.
Mark Crame has over 25 years of experience as an instrumentation and control engineer working in oil and gas, petrochemical, and nuclear industries. He is currently the Lead Instrument Control Engineer for an oil and gas processing facility in Kazakhstan. He has a BEng in Instrumentation and Control Engineering and is a Chartered Engineer.
This curriculum vitae provides a summary of Alaa El-Din Mohamed Ammar's professional experience, education, skills, and personal details over three sentences or less:
Alaa has over 25 years of experience in mechanical engineering projects in Egypt and Saudi Arabia, holding positions such as Project Manager, Site Manager, and Section Head on projects ranging from industrial plants to commercial buildings. He received a bachelor's degree in mechanical engineering from Helwan University in 1989 and has extensive experience with piping, steel structures, equipment installation, and project management software. Alaa is currently the Tendering Manager at Hassan Allam Sons Co., leading estimation teams to bid on MEP and industrial projects.
Mohammed Imran Shaikh is applying for a position as a QA/QC Inspector with over 12 years of experience in electrical and instrumentation inspection roles. He currently works as a QC Inspector in Saudi Arabia, where his responsibilities include preparing inspection plans, monitoring construction quality, raising non-compliance reports, and ensuring work meets approved drawings and specifications. Shaikh holds a diploma in electronics and communication technology and has worked on power plant projects in Saudi Arabia, Qatar, and Kuwait.
This curriculum vitae is for Nasim Nizam, who is applying for the position of Senior QA/QC Inspector (E&I). The summary provides details of Nasim's work experience, qualifications, and responsibilities. Nasim has over 5 years of experience in quality assurance and quality control in the construction industry, with a focus on electrical and instrumentation. Nasim is currently working as an E&I QC Inspector at LR2 Laffan Refinery project in Qatar. Prior experience includes working on gas sweetening and refinery projects in Qatar and India. Nasim holds a diploma in instrumentation and computer science. Responsibilities would include inspection and testing according to specifications, ensuring quality plans are followed, and coordinating with
Jeyaraj Selvaraj has over 17 years of experience in electrical and instrumentation inspection, testing, and commissioning for oil, gas, and petrochemical projects. He has worked on projects in Kuwait and Saudi Arabia for companies like Chevron, KOC, SABIC, and SATORP. His experience includes material inspection, installation inspection, factory acceptance testing, site testing, pre-commissioning, and ensuring compliance with quality standards. He is seeking a senior position in project management or inspection.
Having over 6 years of experience as an Instrument QA/QC Engineer in India and abroad, the candidate is fully conversant with international codes and standards. They have experience ensuring electrical and instrumentation systems are installed and tested according to quality procedures and specifications for various oil, gas and petrochemical projects during construction, commissioning and maintenance. The candidate is also proficient with project planning software.
Suresh Kumar Patel has over 11 years of experience in quality assurance and quality control roles in the oil and gas industry. He has expertise in quality management systems, inspection, testing, and commissioning across various offshore and onshore projects. Currently, he works as a Lead Quality Engineer at Certification Engineers International Limited, a subsidiary of Engineers India Limited, where he is responsible for quality planning, project delivery, and technical integration verification on oil and gas projects.
Baijan Savalan _ Avans High School lecture 27.10.16Baijan Savalan
The document provides an overview of process related aspects in offshore oil and gas. It begins with an introduction to offshore oil and gas field layout, including satellite platforms that separate bulk fluids and a central processing platform for finer separation. It then outlines the key process areas in more detail, including gas/liquid separation, water/condensate separation, chemical injection, compression, dehydration, export pipelines, and pigging. The purpose and basic design of equipment for each process area is described.
Sajid Mallick is seeking a position as a QA/QC Inspector or Engineer with experience in electrical and instrumentation. He has over 8 years of experience in various roles in India and the Gulf. He holds a diploma in instrumentation and is proficient in inspection, testing, calibration and ensuring work is completed according to specifications, standards and quality plans. He has worked on projects in Kuwait, Iraq, Qatar and India for oil, gas and industrial facilities.
Kirk Merritt has over 20 years of experience as an electrician, refrigeration and air conditioning mechanic, and project manager. He has worked on both domestic and large commercial projects, and holds several licenses and accreditations including an "A" Grade Electrical Workers License. Kirk is currently a Project Supervisor at Downer Australia, where he oversees project planning, supervision, purchasing, and completion documentation.
This curriculum vitae summarizes Kevin Morton's career experience working on high voltage substation design and engineering projects from 1979 to present. He has held various roles with increasing responsibility in design, project management, and leadership. His most recent role is as a Principal Designer Representative and Lead Engineer for National Grid, overseeing high voltage substation design and construction projects ranging from 132kV to 400kV.
This curriculum vitae provides details about Stewart Kane including his personal information, contact details, qualifications, and work experience. Some key points:
- Stewart Kane is a British instrument technician born in 1955, married with two children, and enjoys golf, music, and computers.
- His qualifications include O Levels from high school in Scotland and various City & Guilds certificates in engineering studies from a Scottish technical college.
- He has over 40 years of experience working in instrumentation and has held roles such as instrument technician, commissioning engineer, and instrument supervisor on projects in the UK, Europe, Middle East, and Asia.
Mohammad Naushad Alam is applying for the position of Instrumentation QA/QC Inspector with over 10 years of experience in instrumentation projects in the Middle East and India. He has experience in instrumentation construction, startup and commissioning for oil and gas projects. His responsibilities have included inspection of instrumentation installation and testing to ensure compliance with quality standards and specifications. He is seeking a growth opportunity with an organization where he can utilize his qualifications and proven track record.
Khaled El-Hag Ahmed Mohamed Zaki provides his contact information and qualifications in electrical engineering and instrumentation. He received a B.S.c in Electrical Engineering from Alexandria University in 2008 and a Master's degree in Communication and Electronics from the same university in 2014. He has over 5 years of experience as an Electrical and Instrumentation Projects Engineer and is currently working as an Instrumentation and Control Systems Engineer at Abu Qir Petroleum Company. His responsibilities include engineering, installation, testing, and commissioning of electrical, instrumentation, and control systems projects in Egypt's oil and gas industry.
Leon Chacon has over 27 years of experience in project management and engineering for oil and gas projects. He has managed numerous large-scale projects involving instrumentation, controls, electrical systems, and IT for companies like Dresser-Rand, PDVSA, and PEMEX. Chacon has extensive experience overseeing all phases of projects from initial planning through implementation and commissioning. He is skilled in areas like project controls, budgeting, scheduling, and ensuring worker safety on industrial sites.
Toni Azar is a 38-year-old Lebanese mechanical engineer with over 15 years of experience managing M&E projects in Qatar and the UAE. He is currently an M&E Project Manager/Construction Manager/Assistant Project Director at Torishima Pump Mfg. Co. Ltd. in Doha, Qatar, where he has managed over 6 pumping station and water network projects since 2006 with contract values totaling over QR 500 million. Previously, he worked as a Project Engineer in Abu Dhabi from 2002-2006 where he managed the mechanical aspects of 5 water and electricity projects. He holds a B.E. in Mechanical Engineering from the Lebanese American University and various safety and ISO certificates.
Mohammad Tanweer is applying for the position of E&I QA/QC Inspector/Supervisor. He has 14 years of experience in instrumentation for oil, gas, and petrochemical plants. His experience includes inspection, testing, commissioning, and maintenance. He is familiar with international engineering standards and protocols for instrumentation systems.
Sajjad Ali Soomro has over 10 years of experience as a QC Civil Inspector in Gulf countries like Qatar, UAE, and Pakistan. He holds a Bachelor's degree in Civil Engineering from N.E.D University in Pakistan. His responsibilities have included inspecting buildings, foundations, concrete works, and ensuring quality standards. Currently he works for Descon Engineering in Qatar as a QC Inspector on Qatar Gas projects, reporting to the QA/QC Engineer and preparing inspection reports. Previously he has worked on oil and gas, commercial, and infrastructure projects in Qatar, Abu Dhabi, and Pakistan.
This resume is for Eduarde P. Lopez, a Filipino male with over 28 years of experience in instrument and electrical engineering design and construction for oil, gas, and power projects. He holds a Bachelor's degree in Electrical Engineering and has worked on projects in Malaysia and the Philippines, holding various roles including instrument engineer, designer, and project management positions. His responsibilities have included design, construction supervision, vendor evaluation, and ensuring safety and quality standards.
Dennis Cutcher has over 30 years of experience in the oil and gas industry, having lived and worked in locations such as New Orleans, Malaysia, Nigeria, Angola, and Houston. He has expertise in production operations, both domestic and international, and regulatory compliance. Cutcher is a motivated self-starter knowledgeable in areas like facility engineering, subsea controls, and safety programs.
Tarun Sharma has over 17 years of experience in mechanical engineering projects for oil and gas companies, specializing in pipe stress design, analysis, and implementation using software like CAESAR II. He has experience leading teams of stress engineers and delivering projects on time. His skills include stress analysis, coordination, review of vendor documents, stress critical line identification, and stress report preparation. He provides expertise in areas like buried lines, jacketed lines, pipe support design, and software like CAESAR II, Navisworks, and SmartPlant Review.
Mark Crame has over 25 years of experience as an instrumentation and control engineer working in oil and gas, petrochemical, and nuclear industries. He is currently the Lead Instrument Control Engineer for an oil and gas processing facility in Kazakhstan. He has a BEng in Instrumentation and Control Engineering and is a Chartered Engineer.
This curriculum vitae provides a summary of Alaa El-Din Mohamed Ammar's professional experience, education, skills, and personal details over three sentences or less:
Alaa has over 25 years of experience in mechanical engineering projects in Egypt and Saudi Arabia, holding positions such as Project Manager, Site Manager, and Section Head on projects ranging from industrial plants to commercial buildings. He received a bachelor's degree in mechanical engineering from Helwan University in 1989 and has extensive experience with piping, steel structures, equipment installation, and project management software. Alaa is currently the Tendering Manager at Hassan Allam Sons Co., leading estimation teams to bid on MEP and industrial projects.
Kariappa M. P. is an accomplished MEP engineer with over 10 years of experience managing MEP projects in India and the UAE. He has extensive experience in design, planning, execution, and commissioning of HVAC, fire protection, and electrical systems for high-rise buildings and electrical substations. Some of the major projects he has managed include power plants, grid stations, industrial zones, and commercial towers. He is certified as a competent professional for HVAC and fire protection systems by various utility companies in Abu Dhabi.
Kerry Ow Buland has over 14 years of experience in electrical and instrumentation engineering in the oil and gas sector. He holds a BSc in electrical engineering and an MBA. Currently he is a Lead E&I Engineer at Foster Wheeler Upstream, where he manages projects and deliverables. Previously he worked as an electrical design engineer and maintenance engineer on projects in Trinidad and Tobago.
Raj Samarakoon is an instrumentation and controls engineer with over 30 years of experience in engineering, design, installation, and commissioning of DCS, PLC and telemetry systems. He has worked on numerous projects in industries such as oil and gas production, mining, pulp and paper, and nuclear power. His resume provides details of his work history and responsibilities on various projects with Syncrude Canada, AECL, Suncor Energy, and other companies.
John Graney has over 40 years of experience in mechanical engineering, piping design, and construction project management across various industries including nuclear, oil and gas, pharmaceutical, and power generation. He has held security clearances and qualifications to work on nuclear sites and projects. His career includes experience with engineering design, stress analysis, specifications, procurement, and overseeing installation of piping, vessels, tanks, and other mechanical equipment.
Richard Heath is an electrical engineer and project manager based in Worcester, UK seeking contract opportunities. He has over 30 years of experience in various industries including pharmaceutical, water/waste treatment, energy, food/beverage, chemical, and heavy industry. He has extensive skills in project management, design, commissioning, and operational management.
Sherif Esmail is an experienced Electrical and Instrument Engineer from Perth, Australia seeking new opportunities. He has over 10 years of experience working on gas production projects in Egypt for Rashid & Burullus Petroleum company/BG-Group, including both offshore and onshore installations. His experience includes project engineering, construction supervision, commissioning, and maintenance troubleshooting. He holds professional certifications in safety and electrical protection systems and a BSc in Electrical Power Engineering from Cairo University.
Richard Kildea is an experienced Electrical/Instrument Specialist with over 40 years of experience, including nearly 30 years working on oil and gas projects. He has extensive experience in design, construction supervision, and project support roles for offshore and onshore oil and gas facilities. His most recent roles have involved electrical engineering and construction supervision for offshore oil and gas projects in Asia and the Middle East.
Peter Scott has over 30 years of experience as an instrument engineer working on projects in the oil and gas industry. He is currently working for ConocoPhillips on a DCS replacement project. Previously he has worked for ABB, Amec, and other engineering companies on projects involving control system upgrades, instrumentation design, and commissioning. He has a background as an instrument technician and holds an HNC in industrial measurement and control.
This CV summarizes Peter Neba's experience as a C&I engineer, including his education and qualifications. He has over 12 years of experience in engineering for offshore, unmanned platforms, and onshore oil and gas projects. His most recent role is as a lead instrumentation engineer for an unmanned wellhead platform project. He is knowledgeable in international standards and has experience in engineering design, documentation, and commissioning.
This personal CV provides information about Ahmed Tayssir Mohamed, including his contact details, objective, education background, membership, personal data, language and computer skills, and extensive work experience in instrument and control systems engineering spanning 27 years. The CV details his roles and responsibilities on various projects for companies such as AMEC, ADCO, CCC, ADGAS, and ENPPI. It also lists his areas of experience, training courses, and 27 years of experience in distributed control systems, PLCs, safety systems, and more for chemical and petroleum industries.
Robert Zachowski Mechanical Engineer Resume 10-25-16Robert Zachowski
Robert Zachowski has over 30 years of experience in mechanical engineering, project engineering, and HVAC design. He has worked on numerous industrial and commercial projects in roles including mechanical engineer, project engineer, and manager. His experience includes design, construction, and management of HVAC, process equipment, and material handling systems.
Tom van Wyk has over 20 years of experience managing electrical and instrumentation projects in South Africa and overseas. He currently works as an electrical and mechanical site agent for Mota-Engil Construction South Africa. Previously he has held roles as a construction manager for Sakura Brex Plant and Metix Sakura Furnace Project in Malaysia. He has a background in project management, maintenance, and construction for mining and industrial facilities.
This document provides information about Imperative Engineering, including details about the company's establishment in 2005 and the services it provides in various engineering fields. It discusses the company's credentials and commitment to quality work. The following pages include a complete company profile with details of projects undertaken in the last eight years. The company is confident that potential clients will choose to work with Imperative Engineering after reviewing its profile.
Jim Matthews is an engineering manager with over 30 years of experience in major oil and gas projects. He has a BSc in Automation Engineering and MEng in Petroleum Engineering. His career includes conceptual design, detail design, site support, and installation supervision of offshore and onshore projects in various countries. His most recent roles were as Central Engineering Manager for Lukoil overseeing an EPC project in Iraq, and Engineering Manager for an Indonesian company delivering design for offshore and onshore projects.
1. Ahmed Mohamed Youssef Ali has over 20 years of experience in oil and gas construction projects as a piping supervisor, site engineer, and senior piping field engineer.
2. He has worked on projects in Egypt, Algeria, the Gulf region, and internationally with companies like Technip, ABB, Bechtel, and CCIC.
3. His experience includes pipe fabrication, engineering, hydro testing, pre-commissioning, commissioning, and maintenance in respecting safety procedures.
Ahmed Kamal Mohamed Tawfik is an Egyptian piping engineer with over 11 years of experience in piping design, engineering, project management, and construction. He holds a B.Sc. in Mechanical Engineering and is a member of the Egyptian Engineering Syndicate. His experience includes working on refinery, petrochemical, offshore, and power projects in Egypt, Iran, and Qatar. Currently he is a Senior Hydrotest Engineer for an ERC refinery project in Egypt, where he is responsible for test package preparation and execution.
The document is a curriculum vitae for Yeoh Keng Seong. It summarizes his 6 years of experience in offshore and onshore engineering, procurement, construction and commissioning projects. It also lists his skills in areas like Microsoft Office, AutoCAD, programming languages, and certifications in areas like loss prevention systems. The CV provides contact details and qualifications, including a Bachelor's degree in electrical and electronic engineering.
This document is a curriculum vitae for Baron N Bennington. It lists his contact information, qualifications, and extensive experience in instrumentation and engineering roles for oil and gas companies. He has over 30 years of experience in positions including Metering Team Lead, Principal Instrument Engineer, and Senior Instrument Engineer. His experience includes management, design, installation, and support of metering and instrumentation systems for offshore oil and gas facilities.
1. F. S. Percy I.Eng. Minst.MC
CURRICULUM VITAE
PERSONAL DETAILS
Name Frederick S Percy I.Eng. Minst.MC
Address 93, Reynolds Ave,
Chadwell Heath,
Romford,
Essex. RM6 4NS
Contact No 020 8597 8136 (Home)
07951 556929 (Mobile)
fred_percy@hotmail.com (Email Home)
Date of Birth 08/11/53
Marital Status Married
Occupation Senior Instrument Engineer
PROFESSIONAL BODY
The Institute of Measurement & Control. Member
The Engineering Council Incorporated Engineer.
COURSES ATTENDED
May 2014
April 2005
RVK Basic Course: Project Engineering & Construction (2 day
course).
INTOOLS : Operator training V6. (4 day course)
1989 Attended an AutoCAD course. (5 day course)
1984 Attended a Taylor Instrument familiarisation course for the
MOD30 control systems. (3 day course)
1982 Attended a Roxby Instrument engineering course on process
control principles. (5 day course)
EDUCATIONAL DETAILS
COLLEGE/SCHOOL ATTENDED QUALIFICATIONS OBTAINED
1979 – 83
South East London Tech (seltec),
HNC In Industrial Measurement and Control
ONC In Industrial Measurement and Control
1977 – 79
Tottenham Tech.
.
City & Guilds Part 1 in Mechanical Engineering
1970 – 74
Newtownabbey Tech.
.
City & Guilds Advanced Craft Plumbing Certificate.
City & Guilds Craft Plumbing Certificate.
Page 1 of 3
2. F. S. Percy I.Eng. Minst.MC
EMPLOYMENT DETAILS
PRESENT EMPLOYMENT EMPLOYMENT DUTIES
2013 -
Mustang Engineering Ltd
Client : Det Norske Oljeselskap ASA
Location : Woking
PREVIOUS EMPLOYMENT
2012 - 2013
CB&I
Client : Talisman Energy (UK) Ltd
Location : London
2011 - 2012
Ivar Aasen Project (Off shore oil platform)
Principle / Senior I & C Package Engineer
Responsible for the I & C content (to Norsok Standards) of the
following packages:
Process & Utility Pumps, Miscellaneous Pumps,
Electrochlorination, Fresh Water Maker, Drains Water
Treatment, Electrical Heaters and Pedestal Crane.
Montrose BLP Project (Off shore oil platform)
Senior I & C Package Engineer
Responsible for the I & C content of the following packages:
Power Generation, Diesel Treatment, Electrochlorination,
Seawater Deaeration and HVAC
Golden Eagle Project (Off shore oil platform)
CB&I John Brown Limited
Client : Nexen
Location : London
Senior Instrument Engineer.
Responsible for :
All aspects for Field flow meter instruments: Specify, Vendor meetings,
BTA, procure, document review and FAT’s
SPI generated Data sheet for the above instruments.
2011 - 2011 BERANTAI MALAYSIA PROJECT X (Off shore FPSO)
Petrofac Engineering Ltd
Client : PIUAE LLC / PEC SDN BHD
Location: Woking.
Principle Instrument Engineer.
Responsible for:
General Field instruments and reviewing supplier documentation.
2010 - 2010 GOLIAT PROJECT (Off shore FPSO)
CB&I John Brown Limited
Client : Eni Norge / Hyundai
Location : London
Senior Instrument Engineer.
Responsible for :
Specifications to Norsok standards for General field instruments, PSV’s,
Actuated valves and Control valves.
SPI generated Data sheet for the above instruments.
2007 - 2009 Buzzard Enhancement Project (Off shore oil platform)
CB&I John Brown Limited
Client : Nexen
Location : London
Lead I&C Package Engineer.
Responsible for all platform I & C package content, including but not
limited to the following: Compressors, Pumps, Air and Nitrogen
generation, Feed Filters, Chemical injection, Pedestal crane, Anti-Bio
fouling units, MDAMS and DMS.
2006 -2008 Jamnagar Refinery, Jamnagar, India.
Bechtel Corporation
Client : Reliance Industries Ltd.
Location: London
I & C Package Engineer
Responsible for the I & C content of the following packages: Turbines,
Compressors, Pumps, Back wash Feed Filters, Hydrogen and Sulphur
units.
2005 - 2006 Langeled (Gas) Receiving Facilities Project
Parsons E & C
Client: Ststoil ASA.
Location: London
Package engineer including general Instrument engineering duties are:
Ensure Instrument packages meet specifications.
Producing field Instrument data sheets as required.
Page 2 of 3
3. F. S. Percy I.Eng. Minst.MC
2003 – 2005 Projects: Feeder 13 85 Bar Uprating Project
Advantica Limited (UK)
Client: Transco
Location: Ambergate
Derbyshire
Providing value engineering; feasibility studies, and evaluations of
existing Instrument equipment and valves, providing recommendations
based on the study results as to the suitability of the instruments for
compliance with regards to the Uprating Project; provision of Cad
drawings as required.
All above work and procedures carried out using SAP, MS Word, MS
Excel, MS Access and Supported with Email and Internet.
2001 – 2002 Projects: ULSG PHASE II JETTY REFURBISHMENT
Foster Wheeler
Client: Texaco
Location: Pembroke
Refinery, South Wales
Instrument Selection, Site Inspections and Producing Client Data
Sheets.; specification writing including BTE for I.S. and non I.S.
Instrumentation as follows
Control Valves, DP70 Valves, ESD Valves and Relief valves
Pressure and Thermal relief valve (computerised)
Pressure Vacuum Valves, Radar level Instruments,
D.P. level Transmitters, Displacer / Servo level Transmitters,
Sight Gauges, Pressure Gauges, Pressure Transmitters,
Flow Transmitters, Temperature Elements and Transmitters,
Moisture Analysers.
All above work and procedures carried out using AS400, MS Word, MS
Excel, MS Access and Supported with Email.
1988 – 2001 Project: Various projects up to 9.5 million pounds
Tate & Lyle Sugars Ltd
Thames Refinery,
Silvertown,
London. E16 2EW
Employed as a Senior Instrument Engineer and subsequently
progressed to a project engineer / project manager.
Duties included having full responsibility for all aspects of project
Instrument engineering, from Conception, through to commissioning
and hand over of plant, as well as providing training workshops.
General duties :PID design, detail design, calculations for instruments,
Specification writing, Procurement of equipment, equipment inspection
both in this country and abroad, site supervision as well as providing
AutoCAD drawings.
1978 – 88 Project: Escravos-logas pipeline Nigerian Gas gathering system.
IMEG
71, Queensway,
London. WC2 4QR.
Employed as a Senior Instrument Designer.
Design duties included: Back of panel wiring, Panel G. A.’s,
Control room layouts, Process / pneumatic Hook ups, field wiring and
M.T.O.
1987 Project: Property Services Agency (PSA)
Fluor Daniel Ltd,
Broadway Building,
London. SW1
Employed as a Senior Instrument Engineer for a “Confidential nuclear
facility for the British Government at a Confidential site in the United
Kingdom”.
1986 – 87 Project: Rozenberg, CO2 Plant
Air Products Ltd
48, Leicester Square,
London.
Employed as a Senior Instrument Designer.
Design duties included: Panel schematic wiring diagrams, Area
layouts, Control room layouts (D.C.S.), and Process / pneumatic Hook
ups.
Page 3 of 3
4. F. S. Percy I.Eng. Minst.MC
1986
Matthew Hall Engineering
Tottenham Court Road,
London. WC1
Project: Eider, Off shore oil platform
Client: Shell.
Employed as a Senior Instrument Designer to carry out work on the
Telecommunications system.
Design duties included: Telecommunications connection diagrams
and layouts (Cable, P.A. Entertainments, and Phone systems).
Project: Brae ‘B’ Off shore oil platform
Client: Marathon Oil.
Design duties included: Instrument Interconnection diagrams and
junction box schedules.
1985 – 86 Project: Various Cryogenic Plants
Stearns Catalytic,
48, Leicester Square,
London
Employed as a Senior Instrument Designer.
Design duties included: Control valve sizing, Orifice plate sizing,
Instrument equipment specification writing, Panel schematic wiring
diagrams, Intrinsically safe control wiring and control room layouts.
1985
Seltrust Engineering Ltd (BP)
57 – 61 Clerkenwell Road,
London. EC1
Employed as a Senior Instrument Designer to carry out work on a
chemical plant.
Design duties included: Panel layouts and control hook-ups..
1975 – 85
B. O. C. Cryoplants Ltd
Angel Road,
London. N18
Employed as a fabrication fitter to carry out work on large air separation
projects
Experience was gained on: The measurement of process variables:
Temperature, Pressure, flow, Level and Analysis.
Transferred to the Instrument D.O. as a Trainee draughtsman;
progressed to a designer and subsequently a senior designer.
Duties included having full responsibility for the instrument design on
cryogenic plants for O2, N2 and Argon production as follows:
Control loops, Analysis, civil brief (site survey), Proposals, hook-ups
(proc & pneu), Electronic loops, Interconnecting diagrams, Area
layouts, Wiring diagrams, Cable schedules, Instrument schedules,
Control panel wiring, Control panel layouts, Control panel Inspection
and testing at vendors premises, Programming for microprocessor
control systems (Texas ladder logic), and Taylor MOD30 systems
(6000)
1969 – 75
R. Finley Ltd
Belfast
Five year apprenticeship in Plumbing
Page 4 of 3