The document is a curriculum vitae for Amin Khatib, who has over 15 years of experience in HVAC, plumbing, and mechanical engineering and design. He has worked on a wide range of commercial, residential, and industrial projects. Currently, he is seeking a position as an HVAC, plumbing, and mechanical engineer for a building engineering or construction firm.
Flue gas low temperature heat recovery system for air conditioningeSAT Journals
Abstract Huge amount of energy wasted through the flue gas in thermal power station causes great concern in recent years. Discharging hot flue gas in the environment is not only a wastage of energy but also increases the rate of global warming. Efforts are given world -wide to harness the energy for useful purposes. In this work, the waste heat of flue gas in a 350 MW thermal power plant is utilized in vapor absorption air conditioning plant. Gas to liquid multi-pass cross flow heat exchanger that have been placed in the existing space between boiler and chimney. The dimensions of the finally selected heat exchanger are 0.106m × 2.4m × 3.4m. The number of pipes required for the heat exchanger is found to be 12 using iteration method and temperature of water at the outlet of last pipe is 101.1℃. The extracted energy from the flue gas is used to heat water to be utilized in the generator of a vapor absorption refrigeration system that has produced a refrigerating capacity of 70 TR. approximately. Due to the corrosive nature of flue gas, heat recovery is confined up to the acid dew point temperature of the flue gas. Suitable software is used to find out the detailed design parameters of Gas to liquid multi-pass cross flow heat exchangers. Out of many feasible designs of heat exchangers, the most economic design is selected as the final design. Keywords—Air Conditioning; Flue Gas; Heat Exchanger; Heat Recovery; Vapour Absorption Machine
DAMMAM SECOND INDUSTRIAL CITY - IPS REHABILITATION WORKSIslam Nassef
Design capacities of the lift station
approximately 1670 m3/h. The
GWC’s initial goal for this project
is to develop a prioritized list of
repair/refurbishment projects based upon a comprehensive condition assessment and criticality analysis of IPS lift station planned to remain in operation.
Arm7 based automatic soot blower control systemijics
Boiler is a power house of any process industry. Soot and scale formation in boilers is still a great concern
for increasing the efficiency of the boiler. At present, soot blowers are operated manually once in a shift.
This paper presents one of the embedded based industrial automation techniques for efficient operation of
soot blowers. An automation technique is designed and implemented in real time using ARM7 platform.
Stack temperature is used as the criteria for controlling the soot blower. Embedded C language is used for
implementing the automatic control algorithm. The performance of the designed system is tested in the
laboratory.
Practical Boiler Control and Instrumentation for Engineers and TechniciansLiving Online
This workshop introduces the basic practices of controls systems and safety controls for industrial steam generating boilers. It focuses on the control and safety requirements applicable to most types of boilers from small gas-fired units to large multi-fuel installations.
The workshop will provide training in how control and instrumentation is designed to manage the main variables such as drum water level, furnace draft, combustion fuel and air conditions. Burner management systems are introduced with their principal features including flame safety systems.
The essential safety requirements for boilers and burners are identified and the corresponding safety interlocks are explained as practical solutions in accordance with the latest safety standards.
WHO SHOULD ATTEND?
Boiler plant commissioning engineers
Consulting engineers
Control system engineers
Design engineers
Instrumentation engineers and technicians
Mechanical engineers and technicians
Operation, maintenance, inspection and repair specialists
Senior boiler plant operators, repairers and installers
MORE INFORMATION: http://www.idc-online.com/content/practical-boiler-control-and-instrumentation-engineers-and-technicians-39
Flue gas low temperature heat recovery system for air conditioningeSAT Journals
Abstract Huge amount of energy wasted through the flue gas in thermal power station causes great concern in recent years. Discharging hot flue gas in the environment is not only a wastage of energy but also increases the rate of global warming. Efforts are given world -wide to harness the energy for useful purposes. In this work, the waste heat of flue gas in a 350 MW thermal power plant is utilized in vapor absorption air conditioning plant. Gas to liquid multi-pass cross flow heat exchanger that have been placed in the existing space between boiler and chimney. The dimensions of the finally selected heat exchanger are 0.106m × 2.4m × 3.4m. The number of pipes required for the heat exchanger is found to be 12 using iteration method and temperature of water at the outlet of last pipe is 101.1℃. The extracted energy from the flue gas is used to heat water to be utilized in the generator of a vapor absorption refrigeration system that has produced a refrigerating capacity of 70 TR. approximately. Due to the corrosive nature of flue gas, heat recovery is confined up to the acid dew point temperature of the flue gas. Suitable software is used to find out the detailed design parameters of Gas to liquid multi-pass cross flow heat exchangers. Out of many feasible designs of heat exchangers, the most economic design is selected as the final design. Keywords—Air Conditioning; Flue Gas; Heat Exchanger; Heat Recovery; Vapour Absorption Machine
DAMMAM SECOND INDUSTRIAL CITY - IPS REHABILITATION WORKSIslam Nassef
Design capacities of the lift station
approximately 1670 m3/h. The
GWC’s initial goal for this project
is to develop a prioritized list of
repair/refurbishment projects based upon a comprehensive condition assessment and criticality analysis of IPS lift station planned to remain in operation.
Arm7 based automatic soot blower control systemijics
Boiler is a power house of any process industry. Soot and scale formation in boilers is still a great concern
for increasing the efficiency of the boiler. At present, soot blowers are operated manually once in a shift.
This paper presents one of the embedded based industrial automation techniques for efficient operation of
soot blowers. An automation technique is designed and implemented in real time using ARM7 platform.
Stack temperature is used as the criteria for controlling the soot blower. Embedded C language is used for
implementing the automatic control algorithm. The performance of the designed system is tested in the
laboratory.
Practical Boiler Control and Instrumentation for Engineers and TechniciansLiving Online
This workshop introduces the basic practices of controls systems and safety controls for industrial steam generating boilers. It focuses on the control and safety requirements applicable to most types of boilers from small gas-fired units to large multi-fuel installations.
The workshop will provide training in how control and instrumentation is designed to manage the main variables such as drum water level, furnace draft, combustion fuel and air conditions. Burner management systems are introduced with their principal features including flame safety systems.
The essential safety requirements for boilers and burners are identified and the corresponding safety interlocks are explained as practical solutions in accordance with the latest safety standards.
WHO SHOULD ATTEND?
Boiler plant commissioning engineers
Consulting engineers
Control system engineers
Design engineers
Instrumentation engineers and technicians
Mechanical engineers and technicians
Operation, maintenance, inspection and repair specialists
Senior boiler plant operators, repairers and installers
MORE INFORMATION: http://www.idc-online.com/content/practical-boiler-control-and-instrumentation-engineers-and-technicians-39
Интернет-бизнес Как увеличить продажи с помощью партнерской программы» (Основ...Александр Круглов
Сайт сервиса АвтоВебОфис (АвтоОфис): https://autoweboffice.ru/?r=acs&id=118&lg=ru
Из видео Вы узнаете:
- Как увеличить продажи с помощью партнерской программы?
- Что такое партнерская программа?
- Типы партнерских программ
- Общий механизм работы партнерской программы
- Особенности партнерской программы в Интернет
- Как партнер может Вас подставить (обмануть)?
- Тонкости настройки партнерской программы
- Как работать с партнерами?
- Как осуществлять email-рассылки по партнерам?
1. Curriculum Vitae Amin Khatib February 2016
Page 1 / 6
PERSONAL INFORMATION Amin Khatib
Tehran, Iran
…………………. +98 912 4770424
Khatib.amin@yahoo.com
www.linkedin.com , www.xing.com
Sex Male | Date of birth 12/09/1978 | Nationality Iranian
Consultation of HVAC and Plumbing systems as below:
1- Providing initial calculation and mechanical report in order to system selection.
2- Calculation and designing of heating & cooling loads by carrier software, ventilation, air Condition
and mechanical system and equipment according to Ashrae std and Carrier handbooks, steam
and condensate system, fire protection according NFPA 10, 13, 14 and somewhat Co2 systems
and smoke management, domestic and potable water systems, drainage, sanitary waste and
network sewage system, swimming pool system and its equipment, central vacuum system and
low pressure fuel gas system. Preparing calculation notebook and drawing these systems by
Autocad software.
3- Preparing MTO, cost estimation, technical specification and construction method documents.
For these projects:
JOB APPLIED FOR
HVAC, Plumbing & Mechanical Engineer
(Building Engineering-Consulting Firm)
WORK EXPERIENCE
October 2015 – Present HVAC and Mechanical Designer
Memar Naghshin Saz Consulting Engineering Co.(Part-time contract) - Tehran, Iran
▪ Project:
- Commercial, Recreational and Residential complex containing hotel rooms, banquet halls,
shopping centre, swimming pool and parking in two separate building along sides of a road.
April 2014 – July 2015 HVAC and Mechanical Designer
Tarhafarid Consulting Engineering Co. (Outsource contract) - Tehran, Iran
▪ Project:
- Covered Stadium, IT and Main Administrative Building and also fundamental PW, SWW, FFW
piping of site of Hormozgan Steel Complex
March 2013 – Feb 2015 HVAC and Mechanical Designer
Animal Science Research Institute (Consultation contract) - Karaj, Iran
▪ Project:
- Governmental Research Lab about farm animals - 3500 sqm
August 2013 – March 2014 HVAC and Mechanical Designer
Mahab Ghodss Consulting Engineering Co.(Outsource contract) - Tehran, Iran
▪ Project:
- Multipurpose Complex (Residential, Commercial and Administrative) - 30000 sqm
2. Curriculum Vitae Amin Khatib February 2016
Page 2 / 6
WORK EXPERIENCE
Execution manager of HVAC and Plumbing by material as below:
1- Ducting by Galvanized steel and pre-insulated duct sheet.
2- Sanitary waste water, Rain water and Condensate Drain water by Caste Iron, PP (push-fit), PE
(Welded) and PP (Welded) materials.
3- Sanitary domestic water by Treaded Galvanized Steel, PP (Welded) and 5 Layer Laminated PE
materials.
4- Heating and cooling water by Welded Black Steel and 5 Layer Laminated PE materials.
5- Steam, condensate and fire-fighting water by Seamless Black Steel materials.
For these projects:
March 2012 – June 2015 HVAC and Mechanical Manager
Memar Naghshin Saz Consulting Engineering Co.(Part-time contract) - Tehran, Iran
▪ Project:
- Designing and Consulting services during construction period of a staff hostel in Kharg island with
Health and Treatment Organization of Petroleum Industry
1- Project contract and human resources responsible
2- HVAC and Plumbing supervising manager
June 2012 – December 2012 HVAC and Mechanical Designer
Memaran Haft Bana Consulting Engineering Co.(Outsource contract) - Tehran, Iran
▪ Project:
- Omidieh Hospital including Emergency, 64th patient beds, Nursery, Surgery, Critical care,
Radiology, Physiotherapy, Main Lab, Central sterile, Laundry and kitchen.
January 2009 – Present HVAC and Mechanical Designer
Istagouya Consulting Engineering Co. (Outsource contract) - Tehran, Iran
▪ Projects:
- Workshops, Warehouses, Substation, Hotels, Restaurant and Administrative Buildings in
Petrochemical Projects.
- Many Residential, Commercial and Administrative Complexes up to area of 80000 sqm
February 2002 – December 2004 HVAC and Mechanical Assistant Designer
Tarh va Afarinesh architectural and Engineering Consultants (Full-time contract) - Tehran, Iran
▪ Projects:
- Esteghlal (Hilton) Grand Hotel (South tower and Extension part) - 30000 sqm
- Iran Zamin Grand Hotel - 40000 sqm
- Educational Hotel (Hotel school) - 20000 sqm
- Apple Rest Area - 5200 sqm
JOB APPLIED FOR
HVAC, Plumbing & Mechanical Engineer
(Building Engineering-Construction Firm)
August 2014 – March 2015 HVAC and Mechanical Designer and Contractor
Pars Garma Construction and Industrial Co. (E&C contract) - Tehran, Iran
▪ Project:
- Designing and execution of an official auditorium in Tehran.
DX rooftop package with heating coil and duct-work by pre-insulated duct sheet.
3. Curriculum Vitae Amin Khatib February 2016
Page 3 / 6
WORK EXPERIENCE
May 2012 – January 2013 HVAC and Mechanical Designer and Contractor
PBS Construction Co. (E&C contract) - Shiraz, Iran
▪ Project:
- Designing and execution of an official building – 3300 sqm
Cooling by DX multi panel split unit (VRF/VRV) and heating by hot water radiators. Sanitary
domestic and waste water, rain and drain and manual fire-fighting systems.
January 2012 – Present HVAC and Mechanical Designer and Contractor
Mr. Kashany (E&C contract) - Tehran, Iran
▪ Project:
- Designing and execution of a luxurious residential building - 7000 sqm
Central equipment is Direct fire absorption chiller, Cast iron hot water boiler, Cooling tower, Tank
heater, Water softener, Water storage tank, Booster and circulating pumps .
August 2007 – September 2008 Technical Manager
Ban Rowshan Engineering Co. (Full-time employee) - Tehran, Iran
▪ Project:
- Utility equipment and piping of Omran-e-Anarak Cement Factory - Cap: 3300 Tons/year
Equipped of main water storage tank by water cyclone, sand filter, water softener, service water,
irrigation, fire-fighting and sanitary water booster pumps. Equipped and piping of compressed air
rooms. Underground piping for those systems. Equipped gas-oil storage tanks by water-foam fire-
fighting systems
December 2004 – March 2005 Workshop Mechanical Supervisor Assistance
Tarh va Afarinesh architectural and Engineering Consultants (Full-time contract) - Tehran, Iran
▪ Project:
- Kowsar Grand Hotel in Esfahan - 6000 sqm
It renovated during 4 month at 4 of 6 guest floors and all spaces at ground floor, for OPEC
SESSION in 2005. It was the hardest project that I have done because of critical deadline, time
limitation and multiplicity of activities and sub-contractors.
JOB APPLIED FOR
HVAC, Plumbing & Mechanical Engineer
(Building Engineering-Supervision)
May 2014 – Present HVAC and Mechanical Supervisor
Ministry of Roads and Urban Development- Tehran, Iran
My responsibility is supervising on execution of HVAC and Plumbing systems for buildings up to 15
floors above foundation. It contains controlling of designing, approve it according to legal checklists
and writing checking reports to organization.
- Sanitary domestic and waste water systems
- Rain and drainage systems
- Heating and cooling systems
- Ventilation systems
- Installation of equipment
July 2013 – Present Low pressure fuel gas system Designer and Supervisor
Ministry of Roads and Urban Development- Tehran, Iran
4. Curriculum Vitae Amin Khatib February 2016
Page 4 / 6
WORK EXPERIENCE
EDUCATION AND TRAINING
My responsibility is designing and supervising on execution of low pressure fuel gas system for
buildings. It contains 0.25 psi pressure and up to 160 m3/hr flow rate.
- Calculation of gas consumption
- Defining of heating system and other equipment consumer according to legal criteria and each
building limitation
- Designing of piping, chimneys and fresh air inputs
- Supervision on execution of those activities matching to legal terms and finally ;
- Authorize to connection of gas meter
March 2011 – December 2012 Calculation and Designing Controller
Health and Treatment Organization of Petroleum Industry (Part-time employee) - Tehran, Iran
My duties were controlling of initial report, calculation, designing and drawing of HVAC, medical gases
piping, steam and condensate piping, plumbing and mechanical and medical systems according to
international standards and legal terms of medical buildings for bellow projects:
- Tehran Polyclinic - Tehran, Tehran, Iran
- Mahshahr Polyclinic - Mahshahr, Khuzestan, Iran
- Mashhad Polyclinic - Mashhad, Khorasan, Iran
- Qom Polyclinic - Qom, Qom, Iran
- Tabriz Polyclinic - Tabriz, East Azerbaijan, Iran
- Shahinshahr Hospital - Shahinshahr, Isfahan, Iran
JOB APPLIED FOR HVAC & Mechanical Technician (Operation and Maintenance)
May 2015 – Present Building Mechanical Equipment Operator
Mr Sadeghi residential Building- Tehran, Iran
It is belong to luxury building contain 13 residential units plus recreational section, in 9 floors.
Equipment:
1- Single effect hot water absorption chiller ; Cap: 80 ref. tons
2- Bottle type fiberglass cooling tower
3- Cast iron hot water boiler plus gas log burner ; Cap: 500'000 kcal/hr
4- Radiation condensation boiler plus proportional burner ; Cap: 500'000 kcal/hr
5- Two sets coil heated vertical domestic hot water generator ; Cap: 700 lit/ each
6- Two sets base mounted cooling water circulating pump ; P: 7.5 kw
7- Two sets inline chilled and hot water circulating pump ; P: 2.2 kw
8- Two sets inline chiller's generator heating water circulating pump ; P: 2.2 kw
9- Two sets inline towel warmers heating water circulating pump ; P: 2.2 kw
10- Two sets inline tank heater heating water circulating pump ; P: 0.37 kw
11- Two sets inline heat ex changers heating water circulating pump ; P: 0.37 kw
12- Open expansion tanks for heating and cooling systems
13- Resin base water softener ; Cap: 360 k grains
14- Sanitary domestic water storage tank and booster pump
15- Filters and circulating pump station for swimming pool and whirlpool
16- Electrical panel and other controlling devices and instrument
September 1997 – June 2002 Bachelor of Science in Mechanical Engineering (Heat & Fluids)
Islamic Azad University, Tehran, Iran
▪ Subjects included :
- Thermodynamic, Fluid Mechanics, Heat transfer, HVAC& Refrigeration Systems and Cold--rooms,
Turbo machines, Power Plants, Heat Exchangers Design
- Statics, Dynamics, Strength of Materials, Mechanical Element Designing, Machine Dynamics,
Mechanical Vibrations, Automatic Control
- Industrial Drawing, Foundations of Electrical Engineering
- Relevant Physics and Mathematic
5. Curriculum Vitae Amin Khatib February 2016
Page 5 / 6
PERSONAL SKILLS
Mother tongue(s) Persian
Other language(s) UNDERSTANDING SPEAKING WRITING
Listening Reading Spoken interaction Spoken production
English B2 B2 B2 B2 B2
Overall Band score of IELTS : 5
German A1 A1 A1 A1 A1
I’ve started it recently and I hope to achieve (A1) soon
Levels:A1/2: Basic user - B1/2: Independent user - C1/2 Proficient user
Common European Framework of Reference for Languages
Communication skills ▪ Verbal Skills
- I learned express myself clearly and talk easily with others, because first impression is the last
impression.
- In order to satisfy counsellors and contractors, I have to talk about my ideas logically and
comprehensively.
- Describing of my opinion about my jobs to my clients and employers, clearly and concisely.
▪ People Skills
- Persuade and encourage people whom I supervise fuel gas piping in their houses, in order to
observe safety rules.
- Sometimes I act kindly and helpfully because of my clients’ dificulty, so I should be a good listener.
- If I do not be pleasant and sociable, I cannot be alive at my business.
- Most of the times I should be series with plumbers and also constructors because of their
mistakes.
▪ Administrative Skills
- Run an own minor contractor with an electrician partner and five execution groups as a building
mechanical and electrical contractor.
- Communicate and bargain with mechanical sub-contractors for their wages and method of
payment.
- Preparing agreements with subcontractors, setting some laws to manage them in the workshop
and so on and so forth.
Organisational / managerial
skills ▪ Management Skills
- Managing budget and expenses in communicate with partners for own office.
- Bargaining with employer in order to achieve perfect contract and also set claims to gain more
money along projects.
- Direct of supervisors at workshops to control of contractor’s execution employees.
▪ Leadership Skills
- Teach and describe methods of designing, specific details and useful guides to senior and junior
engineers and drafters.
- Managing meetings among engineering teams like architects, structures and electricians.
- Motivate employees to be better at their position by giving reward and forfeit, so these caused,
they participate at exigent projects.
▪ Teamwork Skills
- Preparing feasibility study in participation with planning team to present targets of projects.
- Cooperation in Coordinate and plane designing presentation with four other engineers in other
firms of building construction.
- Perceive limitation and sensibilities of some projects and redesign and redraw those, according
to architectural and structural changes.
6. Curriculum Vitae Amin Khatib February 2016
Page 6 / 6
ADDITIONAL INFORMATION
ANNEXES
Job-related skills
▪ HVAC and Plumbing Designer and Supervisor, Fire Protection (NFPA 10, 13, 14) System Designer,
Low Pressure (1/4 Psi) Fuel Gas System Designer and Supervisor
▪ Familiar with city supply water and sewerage network designing
▪ Familiar with Execution of Galvanized and Pre-insulated Duct-works, Threaded and Welded Steel,
PP and PE Pipe-works, Insulation, Installation of Piping and Mechanical Eq. like valve, fan coil,
pump, etc.
▪ Familiar with low voltage electricity for building consumption such as lighting and power, cable
sizing, elec. motors and elec. panels.
▪ Familiar with setting up and maintenance of Single Effect Absorption Chiller
▪ Relative knowledge of Ashrae and Carrier handbooks, NFPA 10,13,14, DIN, PMBOK (Project
Management)
Computer skills ▪ Competent with MS Office program (Word, Excel), Auto CAD and Carrier (HAP 4.5)
▪ Relative knowledge of Revit, Water GEMS, Sewer CAD, Design Builder soft wares.
Qualification
Memberships
- Certificate of Designing and Supervising of water source Fire fighting and Fire protection systems
installation. (February 2016)
- Certificate of training course attending about ICMVP by management development institute
(September2015)
- Certificate of Operation and Maintenance of Absorption Chiller by SARI PUYA factory (June 2015)
- Building Mechanical Installations Engineering (HVAC & Mechanical & Plumbing) - PE 1st Grade
(2015) - Designing and Supervising of HVAC, Mechanical and Plumbing systems for buildings up to
15 floors above foundation.
- Building Mechanical Installations Engineering (HVAC & Mechanical & Plumbing) - PE 3rd Grade -
Construction - Execution of HVAC, Mechanical and Plumbing systems for buildings (2013)
- Building Mechanical Installations Engineering (0.25 psi Fuel City Gas) - Designing and Supervising of
Low Pressure Fuel Gas System (2013) . It contains 0.25 psi pressure and up to 160 m3/hr flow rate.
- Building Mechanical Installations Engineering (HVAC & Mechanical & Plumbing) - PE 2nd Grade
(2009) - Designing and Supervising of HVAC, Mechanical and Plumbing systems for buildings up to
10 floors above foundation.
- Building Mechanical Installations Engineering (HVAC & Mechanical & Plumbing) - PE 3rd Grade
(2009) - Designing and Supervising of HVAC, Mechanical and Plumbing systems for buildings up to 5
floors above foundation.
- Iran Society of Heating, Refrigeration and Air condition Engineers
Associate membership (2013 - 2016)
- Tehran Association of Mechanical Engineers of Buildings
Common membership (2012 – Present)
- Iran Society of Mechanical Engineering
Common membership (2013 – 2015)
- Tehran Construction Engineers Organization
Professional membership (2004 – present)
▪ ……..
▪ ………..
Completed documents of these certificates will send if needed.