This document discusses computer networks and how to connect two computers using a wired connection. It defines different types of computer networks including LAN, MAN, and WAN. It then lists the equipment needed to create a wired connection between two computers, such as RJ45 connectors, UTP cable, a crimper, wire stripper, LAN tester, and network interface cards. It provides instructions for creating a crossover network cable by assigning the wire pins in the RJ45 connectors and crimping the connectors to the cable.

1. Sherwin C. Maningas

2. What is a Computer Network?
• Computer Network - is a group of computers
interconnected with one another.
Sherwin C. Maningas

3. There are different types of computer network namely;
LAN (Local Area Network) - A type of computer
network within a specific area or vicinity. For example,
computers inside the school connected to one another
is considered as LAN.
MAN (Metropolitan Area Network) - A type of
computer network within the town or city.
WAN (Wide Area Network) - This type of computer
network is the largest because it it a global
interconnection of computers. An example of this is the
Internet.
Sherwin C. Maningas

4. All computer devices connected to a network is
called network devices. printers. switch,
MODEM, router etc are all computer network
devices. To connect computer to another
computer you could use either a cable or signal
as your medium. Network cable is the cheapest
and easiest to manage. Knowledge and skills in
creating a network cable is also pre-requisite in
connecting computers together. Also knowledge
in IP addressing and different network devices is
a good start if you want to learn how to connect
computers together.
So how computer network happens?
Sherwin C. Maningas

5. What are the Equipment, tools and materials
needed in Connecting two computers using
wired connection?
Sherwin C. Maningas

6. RJ45
RJ means Registered jack. This is a standard physical Network Interface used for
connecting telecommunications equipment commonly, a computer networking
equipment.
Sherwin C. Maningas

7. UTP CABLE
The cheapest cable use in computer in networking is the UTP (Unshielded
Twisted Pair) cable. Other use the STP (Shielded Twisted Pair) cable which is
cost much than UTP but more reliable.
Sherwin C. Maningas

8. CRIMPER
Crimping tool is used to join the RJ-45 and RJ-11 connectors to the both ends of
either phone or CAT5 cable.
Sherwin C. Maningas

9. WIRE STRIPPER
A tool designed to remove the protective covering (jacket)
off of a cable to expose the inner wires. Because different
wires come in different shapes, there are dozens of
different wire strippers available.
Sherwin C. Maningas

10. LAN TESTER
A cable tester is a
device that is used to
test the strength and
connectivity of a
particular type of cable
or other wired
assemblies.
Sherwin C. Maningas

11. COMPUTERS with Network
Interface Card Adapter
Sherwin C. Maningas

12. Short for Network Interface Card,
the NIC is also referred to as an
Ethernet card and network
adapter. It is an expansion card
that enables a computer to
connect to a network;
Sherwin C. Maningas

13. Most of the
motherboard nowadays
have already a built-in
LAN Adapter (LAN Port)
Sherwin C. Maningas

14. Creating of a cross over network cable
Materials Needed:
2 RJ45
1 meter Network Cable – UTP cable
Tools Needed:
Crimping Tool
Wire Stripper
LAN Tester
Equipment Needed:
2 Working computers with Network Adapter (LAN port)
Sherwin C. Maningas

15. Sherwin C. Maningas

16. wG G WO B WB O WBR BR
1 2 3 4 5 6 7 8
PINS
wo o WG B WB G WBR BR
1 2 3 4 5 6 7 8
PINS
CLIP IS POINTED AWAY FROM YOU
Sherwin C. Maningas

17. Cut the cable insulator to show all the eight wires.
Sherwin C. Maningas

18. Strip off the insulator.
Sherwin C. Maningas

19. Separate all eight wires.
Sherwin C. Maningas

20. Position all eight wires according to its assigned
pins in the RJ45 .
1
2
3
4
5
6
7
8
Sherwin C. Maningas

21. Position all wires. Make sure that all are in proper
pin assignment.
Sherwin C. Maningas

22. Cut the wires.
Sherwin C. Maningas

23. Make sure that the cut is even and small enough
for the RJ45.
Sherwin C. Maningas

24. Put all wires inside the RJ45.
Pin 1
Sherwin C. Maningas

25. Make sure all wires reach the pins
Sherwin C. Maningas

26. Crimp the RJ45 using Crimpping tool
Sherwin C. Maningas

27. wG G WO B WB O WBR BR
1 2 3 4 5 6 7 8
PINS
wo o WG B WB G WBR BR
1 2 3 4 5 6 7 8
PINS
CLIP IS POINTED AWAY FROM YOU
Sherwin C. Maningas