Fueling a digital society
•Download as DOCX, PDF•
1 like•265 views
This document appears to be a seminar report submitted by Lalatendu Swain, an electrical engineering student at Parala Maharaja Engineering College. The report discusses various topics related to power engineering and information and communications technology. It includes sections on world power generation trends, the increasing complexity of power systems, the role of power electronics in transmission and distribution networks, and opportunities for distributed energy resources and materials/devices. The report acknowledges guidance from Swain's guide and principal.
Report
Share
Report
Share
![PARALA MAHARAJA ENGINEERING COLLEGE
[Year]
[Type the document title]
SUBMITTED BY:-
LALATENDU SWAIN
[ T Y P E T H E C O MP A N Y A D D R E S S ]](https://image.slidesharecdn.com/copyofhardcopy-141026081627-conversion-gate01/85/Fueling-a-digital-society-1-320.jpg)
Recommended
Review on power quality analysis by rajendra singh ppt
The document provides a review of power quality analysis. It begins with an introduction that defines power quality and discusses traditional power system quantities. It then discusses the motivation for improved power quality due to the connection of more sensitive loads. The document reviews literature on power quality problems and solutions. It discusses common power quality issues such as harmonics, voltage fluctuations, dips and interruptions. It also reviews methods to improve power quality using custom power devices and mitigation strategies. Finally, it provides conclusions and a list of 20 references on topics related to power quality, renewable energy systems, and the use of custom power devices.
Matlab Implementation of Power Quality Improvement Based on Fast Dynamic Control
This document summarizes a research paper on implementing power quality improvement using a fast dynamic control method in MATLAB. It proposes a transformer-less unified power quality conditioner (TL-UPQC) using four switching devices to form two half-bridge voltage-source inverters, one connected in parallel with the load and one in series with the AC mains sharing the same DC link. The paper presents simulation results in MATLAB showing the TL-UPQC can mitigate voltage sags/swells and current harmonics under nonlinear loads. It concludes the TL-UPQC provides improved power quality compared to other single-phase UPQC configurations.
A Review on Power Flexibility, Generation and Distribution System
Distributed power generation is the latest field because of the ability to accommodate various types of Renewable alternative energy sources, its hidden potential to improve the energy efficiency and power system capability, and its promise for power reliability and security. Many distributed energy sources exist such solar energy, fuel cell, micro turbine, and wind energy. Distributed power generation concept has been implemented in various places with various degree of complexity. A comprehensive review on the distributed power generation is presented in this paper. Rahul Gokhle | Pramod Kumar Rathore "A Review on Power Flexibility, Generation and Distribution System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd46379.pdf Paper URL : https://www.ijtsrd.com/engineering/electrical-engineering/46379/a-review-on-power-flexibility-generation-and-distribution-system/rahul-gokhle
Role of UPQC in Distributed Generation Power System: A Review
The ever increasing share of renewable energy sources (RERs) in the todays scenario, the power grids are suffering from poor power quality due to the intermittent nature of wind and solar based power generating units. The led to extensive research in the field of power quality especially in voltage and frequency regulations Distributed generation involving RERs has become more popular in recent years due to technological advancement and has been started increasingly used in industry. It has become more important to understand the integration of these systems through PE interface with the existing electric power systems networks. At the same time, high frequency switching of Power Electronic interface has caused major Power Quality concerns, which has been tackled with the help of Custom power devices interfaces that has allowed DG to offers various benefits like ability to provide ancillary services, increased energy efficiency, increased functionality through improved power quality and voltage/VAR support, improved electrical system reliability by reducing the fault contributions, and flexibility in operations with various other DE sources. DG also allows the customer to have a choice while it reduces the overall interconnection costs. This paper focuses on widespread use of DG through various Renewable Energy Sources, Power Quality issues associated with the use of Power Electronic interface and use of various Custom Power Devices to improve Power Quality. It particularly evaluates the role of UPQC-DG in various modes of DG in following PQ standards. Sajid Bashir | Gagan Deep Yadav"Role of UPQC in Distributed Generation Power System: A Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11356.pdf http://www.ijtsrd.com/engineering/electrical-engineering/11356/role-of-upqc-in-distributed-generation-power-system-a-review/sajid-bashir
Walter Rivera Resume
Walter Rivera is seeking a Power Distribution Engineering role with experience in electrical engineering, maintenance, and reliability in the oil and gas industry. He has a Master's in Business Administration and a Bachelor's in Electrical Engineering from the University of Houston. His previous role was as an Instrument & Electrical Engineering Team Lead at LyondellBasell Houston Refinery, where he managed resources, ensured maintenance plans, and provided technical expertise. Prior to that, he was a Maintenance/Reliability Electrical Engineer at LyondellBasell, responsible for electrical infrastructure and troubleshooting. He is fluent in Spanish and has experience with various software programs.
Home ems2021
This document provides a comprehensive review of home energy management system (HEMS) concepts, configurations, and technologies. It discusses how HEMS plays a key role in smart grids by enabling scheduling of home appliances to optimize energy consumption and reduce costs without compromising consumer comfort. The document reviews common HEMS components like energy storage systems, renewable energy sources, electric vehicles, and communication technologies. It also examines computing trends in HEMS and how different optimization techniques are used for demand response and scheduling devices to achieve energy efficiency.
Loganathan Resume
N Loganathan is an Electrical Engineer from Tamil Nadu, India currently working in Kuwait. He has over 6 years of experience in electrical power distribution systems, equipment installation, and MEW projects. He is presently an Electrical Engineer for projects at KCC Engineering & Contracting Co LTD in Kuwait. Previously he worked as a Service Engineer for electrical power house operations and maintenance projects in Port Blair, India. He holds a Bachelor's degree in Electrical and Electronics Engineering.
chandra shekar resume1
D. Chandra Shekar is seeking an engineering position where he can use his analytical and interpersonal skills. He has a B.Tech in electrical and electronics engineering with over 8 years of experience as an electrical site engineer and junior engineer. His responsibilities have included project management, equipment maintenance, safety compliance, and resource coordination. He is proficient in solar power systems, switchgear, controls, and power systems.
Recommended
Review on power quality analysis by rajendra singh ppt
The document provides a review of power quality analysis. It begins with an introduction that defines power quality and discusses traditional power system quantities. It then discusses the motivation for improved power quality due to the connection of more sensitive loads. The document reviews literature on power quality problems and solutions. It discusses common power quality issues such as harmonics, voltage fluctuations, dips and interruptions. It also reviews methods to improve power quality using custom power devices and mitigation strategies. Finally, it provides conclusions and a list of 20 references on topics related to power quality, renewable energy systems, and the use of custom power devices.
Matlab Implementation of Power Quality Improvement Based on Fast Dynamic Control
This document summarizes a research paper on implementing power quality improvement using a fast dynamic control method in MATLAB. It proposes a transformer-less unified power quality conditioner (TL-UPQC) using four switching devices to form two half-bridge voltage-source inverters, one connected in parallel with the load and one in series with the AC mains sharing the same DC link. The paper presents simulation results in MATLAB showing the TL-UPQC can mitigate voltage sags/swells and current harmonics under nonlinear loads. It concludes the TL-UPQC provides improved power quality compared to other single-phase UPQC configurations.
A Review on Power Flexibility, Generation and Distribution System
Distributed power generation is the latest field because of the ability to accommodate various types of Renewable alternative energy sources, its hidden potential to improve the energy efficiency and power system capability, and its promise for power reliability and security. Many distributed energy sources exist such solar energy, fuel cell, micro turbine, and wind energy. Distributed power generation concept has been implemented in various places with various degree of complexity. A comprehensive review on the distributed power generation is presented in this paper. Rahul Gokhle | Pramod Kumar Rathore "A Review on Power Flexibility, Generation and Distribution System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd46379.pdf Paper URL : https://www.ijtsrd.com/engineering/electrical-engineering/46379/a-review-on-power-flexibility-generation-and-distribution-system/rahul-gokhle
Role of UPQC in Distributed Generation Power System: A Review
The ever increasing share of renewable energy sources (RERs) in the todays scenario, the power grids are suffering from poor power quality due to the intermittent nature of wind and solar based power generating units. The led to extensive research in the field of power quality especially in voltage and frequency regulations Distributed generation involving RERs has become more popular in recent years due to technological advancement and has been started increasingly used in industry. It has become more important to understand the integration of these systems through PE interface with the existing electric power systems networks. At the same time, high frequency switching of Power Electronic interface has caused major Power Quality concerns, which has been tackled with the help of Custom power devices interfaces that has allowed DG to offers various benefits like ability to provide ancillary services, increased energy efficiency, increased functionality through improved power quality and voltage/VAR support, improved electrical system reliability by reducing the fault contributions, and flexibility in operations with various other DE sources. DG also allows the customer to have a choice while it reduces the overall interconnection costs. This paper focuses on widespread use of DG through various Renewable Energy Sources, Power Quality issues associated with the use of Power Electronic interface and use of various Custom Power Devices to improve Power Quality. It particularly evaluates the role of UPQC-DG in various modes of DG in following PQ standards. Sajid Bashir | Gagan Deep Yadav"Role of UPQC in Distributed Generation Power System: A Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11356.pdf http://www.ijtsrd.com/engineering/electrical-engineering/11356/role-of-upqc-in-distributed-generation-power-system-a-review/sajid-bashir
Walter Rivera Resume
Walter Rivera is seeking a Power Distribution Engineering role with experience in electrical engineering, maintenance, and reliability in the oil and gas industry. He has a Master's in Business Administration and a Bachelor's in Electrical Engineering from the University of Houston. His previous role was as an Instrument & Electrical Engineering Team Lead at LyondellBasell Houston Refinery, where he managed resources, ensured maintenance plans, and provided technical expertise. Prior to that, he was a Maintenance/Reliability Electrical Engineer at LyondellBasell, responsible for electrical infrastructure and troubleshooting. He is fluent in Spanish and has experience with various software programs.
Home ems2021
This document provides a comprehensive review of home energy management system (HEMS) concepts, configurations, and technologies. It discusses how HEMS plays a key role in smart grids by enabling scheduling of home appliances to optimize energy consumption and reduce costs without compromising consumer comfort. The document reviews common HEMS components like energy storage systems, renewable energy sources, electric vehicles, and communication technologies. It also examines computing trends in HEMS and how different optimization techniques are used for demand response and scheduling devices to achieve energy efficiency.
Loganathan Resume
N Loganathan is an Electrical Engineer from Tamil Nadu, India currently working in Kuwait. He has over 6 years of experience in electrical power distribution systems, equipment installation, and MEW projects. He is presently an Electrical Engineer for projects at KCC Engineering & Contracting Co LTD in Kuwait. Previously he worked as a Service Engineer for electrical power house operations and maintenance projects in Port Blair, India. He holds a Bachelor's degree in Electrical and Electronics Engineering.
chandra shekar resume1
D. Chandra Shekar is seeking an engineering position where he can use his analytical and interpersonal skills. He has a B.Tech in electrical and electronics engineering with over 8 years of experience as an electrical site engineer and junior engineer. His responsibilities have included project management, equipment maintenance, safety compliance, and resource coordination. He is proficient in solar power systems, switchgear, controls, and power systems.
Sharef Omar Resume
Sharef Omar has over 5 years of experience in building operations and maintenance. He currently works as a Building Operator for Angus Facilities/RBC Centre where he responds to service requests, performs preventative maintenance on mechanical systems, and conducts daily inspections. Previously, he was an Assistant Building Manager for Earth Rangers and held apprentice roles in electricity. Omar has an engineering diploma from Seneca College and is a member of several industry organizations.
economic-and-resiliency-impact-of-pv-and-storage
The document analyzes the technical and economic viability of solar photovoltaics (PV) and energy storage systems to provide both economic and resiliency benefits at three critical infrastructure sites in New York City. The analysis models four scenarios: 1) Resilient PV sized for economic savings without considering resiliency needs, 2) Resilient PV sized to meet resiliency needs, 3) A hybrid system of resilient PV and generator sized to meet resiliency needs, and 4) A generator only system sized to meet resiliency needs. The results show that resilient PV can be economically viable and provide resiliency benefits for NYC critical infrastructure, with the exact savings depending on site-specific factors. Hybrid systems generally
Muhamad Rashid Resume
This document summarizes the educational and professional experience of Muhammad Roussab Rashid. He received scholarships from Drexel University and awards for academic achievement in Cambridge examinations. His professional experience includes electrical engineering design work at AE Design and engineering co-ops at Ballinger and RCM Technologies. He has a Bachelor's degree from Drexel University and graduated from Colorado Technical University with a GPA of 3.83. Notable projects include power system designs for hospitals and office buildings.
Ab04404170177
Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
calidad de energia
This document discusses how digitizing electrical distribution through power quality monitoring, correction, compliance, and data quality management solutions can help ensure reliability of critical infrastructure and equipment. Permanent power quality monitoring provides visibility into issues to understand their impacts, while correction solutions protect sensitive assets from disturbances. Compliance with standards is also ensured through continuous monitoring. Maintaining accurate system configuration and data quality over the lifetime of the system enables reliable decision making.
Power distribution planning_reference_book__second_edition__power_engineering...
This document provides a summary of the contents and structure of the second edition of the book "Power Distribution Planning Reference Book" by H. Lee Willis. Some key points:
- The book has more than doubled in content from the first edition, with roughly 70% being new material, in order to address modern challenges in power distribution planning.
- New challenges include a greater focus on reliability management, business priorities of reducing costs while maintaining service quality, and managing aging infrastructure.
- The book is organized into four parts that cover resources for distribution planning, detailed reviews of technical distribution system aspects, planning tools and technologies, and the planning process.
- Several new chapters have been added addressing topics like reliability-
Study of distributed energy resources
This document summarizes a study on distributed energy resources (DER). It discusses how increased DER is changing power systems and potential reliability issues. DER provides alternatives to large central plants but can impact transmission systems. The document recommends:
1) Collecting and sharing DER location, type, and performance data across transmission and distribution systems to support modeling.
2) Modeling DER in bulk power system studies if significant impacts are expected based on location and output.
3) Avoiding netting of DER with load and instead aggregating or explicitly modeling DER based on penetration levels.
Webinar - Distributed and Renewable Power Generation
Learn more WPI's Power Systems graduate programs and the trend to distributed and renewable power generation.
IRJET- Analysis of Demand Side Management of Distribution Systems
This document analyzes demand side management techniques in distribution systems using an IEEE 33 bus test system in DigSILent PowerFactory software. It implements different demand side management approaches like incorporating distributed energy sources, load shifting, and valley filling. The distributed energy sources used are distributed generators and batteries. Load shifting is done by shifting different percentages of load to off-peak hours. Valley filling is analyzed for different cases. The results of these demand side management techniques are compared to the base IEEE 33 bus system in terms of improvements to voltage profile and losses. The effectiveness of each technique is evaluated based on the losses.
2.2_Microgrids PUC Regulatory Issues_Winka_EPRI/SNL Microgrid
2.2_Microgrids PUC Regulatory Issues_Winka_EPRI/SNL MicrogridSandia National Laboratories: Energy & Climate: Renewables
Presentation from the EPRI-Sandia Symposium on Secure and Resilient Microgrids: Microgrids PUC Regulatory Issues, presented by Michael Winda, NJ BPU, Baltimore, MD, August 29-31, 2016.Application of dc micro grids for integration of solar home systems in smart ...
The document describes a proposed AC-DC hybrid distribution network for integrating solar home systems into smart grids more efficiently. The network includes a DC microgrid connecting homes to a communal battery storage system at a DC substation. Each home would have a solar home energy management system (SHEMS) to control power flows and provide a user interface. The network is modeled and simulated in MATLAB/Simulink. Simulation results show the network can improve reliability and optimize operation by reducing conversion losses and making better use of solar power and battery storage.
Arc Flash Considerations for Data Center IT Space
Do IT administrators violate arc flash requirements
when they turn off or reset a branch circuit breaker?
What about swapping out a rack power strip? Most
data center operators are familiar with fire safety and
shock hazard protection, but are less familiar with arc
flash safety. Three IT trends have increased the
severity of a potential arc flash in the IT space; higher
data center capacities, higher rack densities, and
higher efficiency designs.
This paper discusses these three trends in the context
of arc flash safety within the IT space. Arc flash is
explained, potential areas of concern in the IT space
are identified, and compliance with associated regulations
is discussed.
Br1507288491 gian brochure_psb
This one-week course discusses smart power flow controllers for smart grid applications. It will provide an overview of power flow control techniques, commonly used power flow controllers, and future trends. The course aims to familiarize participants with the basic principles of power flow control theory and its importance for the development of smart grids. It will include lectures delivered by an expert in designing power electronics-based flexible AC transmission systems controllers. The course also involves tutorials on modeling power systems using EMTP software. It is intended for utility engineers, researchers, and students with a background in electrical engineering.
Power Distribution
As a power distribution solutions provider, UGL Limited provides the foundation for green cities and energy efficient infrastructures. Learn more about its services.
Energy Storage 01
This document summarizes a study analyzing the power loss, efficiency, reliability, and cost of a 1 MW/500 kWh battery-based energy storage system for frequency regulation. The study calculates power losses from the battery and power conversion system components under different operating conditions. It then uses these loss calculations to determine the system's efficiency. Reliability is calculated using an Arrhenius life stress relation considering temperature. Total system cost is also broken down. Key findings include the system having 146 kW power loss and 85% efficiency at rated power. Mean time between failures is calculated as 8 years with 73% reliability after 1 year. Battery and power conversion system costs make up 58% and 16% of total cost respectively. Further research
emPower: Accurately Valuing Distributed Energy Resources
This document summarizes a review of 16 solar PV benefit and cost studies conducted between 2005-2013. Key insights include:
- No single study comprehensively evaluated all benefits and costs of distributed solar PV, though most acknowledged additional sources that were difficult to quantify.
- There was significant variation in estimated values across studies due to differences in local contexts, assumptions, and methodologies.
- Methodological differences that most affected results were analysis resolution/granularity, cost/benefit categories considered, and individual value calculation approaches.
- There was general agreement on estimating energy value but less consensus on other values like grid support services and unmonetized benefits.
- Important gaps remain around quantifying distribution system impacts, grid support
IRJET- A Comparative Study of Various Filters for Power Quality Improvement
This document discusses various filters that can be used to improve power quality by reducing harmonics and correcting power factor. It describes passive filters, shunt active power filters, and series active power filters. Shunt active power filters inject harmonic currents to cancel out load harmonics, while series active power filters generate compensating voltages. Both types of active filters require control schemes to generate the proper compensating signals. Passive filters use tuned filter branches to sink harmonic currents or block harmonic voltages. The document evaluates the compensation characteristics and control methods of different filter topologies to mitigate power quality issues like harmonics and reactive power.
Power Distribution Overview
Privatization of the Power Distribution in Delhi and the exciting challenges and how they were met, a practical experience.
40220140502001
This document summarizes an article from the International Journal of Electrical Engineering and Technology that discusses modernizing traditional grids into smart grids through renewable energy sources. It provides background on the motivation to transition to smart grids, including addressing environmental concerns from fossil fuels and the inability of traditional grids to integrate renewable energy. The document outlines key features of smart grids, including reliability, flexibility, efficiency, sustainability, and enabling new energy markets. It also discusses challenges to smart grids, such as differences between energy generation and demand, transmitting power across grids, ensuring energy security, and developing standards to allow different technology components to work together.
Grid Connected PV System with Power Quality Improvement Using Intelligent Con...
The depletion of the fossil fuel resources and the global warming effects has led the world to think
seriously of other alternative sources of energy. So renewable energy resources (RES) are being connected to
the distribution systems, mostly done by using power electronic converters. But use of power electronic
converters and non-linear loads like at distribution level injects harmonics, which intern cause power quality
problems. Distribution static compensator (DSTATCOM) is very popular in compensating power problems for
nonlinear and unbalanced loads. Any change in the load affects the DC-link voltage (DCLV) directly.
Conventionally, a PI controller is used to maintain the DCLV to the reference value, but its transient response
is poor. So, fuzzy logic controller is proposed which shows better dynamic response. To trigger inverter HCC
is used. The proposed inverter with the control when connected to wind energy, helps the 3-phase 4-wire
linear/non-linear unbalanced load at point of common coupling appear as balanced linear load to the grid.
With MATLAB/Simulink simulation studies, the proposed control technique is demonstrated and evaluated
here.
Singapore Smart Grid From Concept to Reality Slides.pdf
This document provides an overview of a two-day course on smart grids. Day 1 will introduce smart grids and include case studies from the UK. It will also cover energy storage integration and demand side response. Day 2 will discuss active network management, advanced power flow, and the integration of renewable energy sources. Speakers include professors and doctors discussing various technical aspects of smart grids.
AI documention _merged.pdf
This document discusses the concept of intelligent substations in power distribution systems. It describes how intelligent substations utilize digital and information technologies to integrate monitoring, control, and protection systems. Key features include sharing information over an optical bus, remote monitoring of equipment, and standardized interfaces between devices from different vendors. The document also outlines various power system control applications that could benefit from intelligent techniques, such as generation scheduling, voltage control, security assessment, and emergency control. Devices like switchgear, transformers, and protection and control equipment can all contribute to building intelligent substations through integrated monitoring and control.
More Related Content
What's hot
Sharef Omar Resume
Sharef Omar has over 5 years of experience in building operations and maintenance. He currently works as a Building Operator for Angus Facilities/RBC Centre where he responds to service requests, performs preventative maintenance on mechanical systems, and conducts daily inspections. Previously, he was an Assistant Building Manager for Earth Rangers and held apprentice roles in electricity. Omar has an engineering diploma from Seneca College and is a member of several industry organizations.
economic-and-resiliency-impact-of-pv-and-storage
The document analyzes the technical and economic viability of solar photovoltaics (PV) and energy storage systems to provide both economic and resiliency benefits at three critical infrastructure sites in New York City. The analysis models four scenarios: 1) Resilient PV sized for economic savings without considering resiliency needs, 2) Resilient PV sized to meet resiliency needs, 3) A hybrid system of resilient PV and generator sized to meet resiliency needs, and 4) A generator only system sized to meet resiliency needs. The results show that resilient PV can be economically viable and provide resiliency benefits for NYC critical infrastructure, with the exact savings depending on site-specific factors. Hybrid systems generally
Muhamad Rashid Resume
This document summarizes the educational and professional experience of Muhammad Roussab Rashid. He received scholarships from Drexel University and awards for academic achievement in Cambridge examinations. His professional experience includes electrical engineering design work at AE Design and engineering co-ops at Ballinger and RCM Technologies. He has a Bachelor's degree from Drexel University and graduated from Colorado Technical University with a GPA of 3.83. Notable projects include power system designs for hospitals and office buildings.
Ab04404170177
Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
calidad de energia
This document discusses how digitizing electrical distribution through power quality monitoring, correction, compliance, and data quality management solutions can help ensure reliability of critical infrastructure and equipment. Permanent power quality monitoring provides visibility into issues to understand their impacts, while correction solutions protect sensitive assets from disturbances. Compliance with standards is also ensured through continuous monitoring. Maintaining accurate system configuration and data quality over the lifetime of the system enables reliable decision making.
Power distribution planning_reference_book__second_edition__power_engineering...
This document provides a summary of the contents and structure of the second edition of the book "Power Distribution Planning Reference Book" by H. Lee Willis. Some key points:
- The book has more than doubled in content from the first edition, with roughly 70% being new material, in order to address modern challenges in power distribution planning.
- New challenges include a greater focus on reliability management, business priorities of reducing costs while maintaining service quality, and managing aging infrastructure.
- The book is organized into four parts that cover resources for distribution planning, detailed reviews of technical distribution system aspects, planning tools and technologies, and the planning process.
- Several new chapters have been added addressing topics like reliability-
Study of distributed energy resources
This document summarizes a study on distributed energy resources (DER). It discusses how increased DER is changing power systems and potential reliability issues. DER provides alternatives to large central plants but can impact transmission systems. The document recommends:
1) Collecting and sharing DER location, type, and performance data across transmission and distribution systems to support modeling.
2) Modeling DER in bulk power system studies if significant impacts are expected based on location and output.
3) Avoiding netting of DER with load and instead aggregating or explicitly modeling DER based on penetration levels.
Webinar - Distributed and Renewable Power Generation
Learn more WPI's Power Systems graduate programs and the trend to distributed and renewable power generation.
IRJET- Analysis of Demand Side Management of Distribution Systems
This document analyzes demand side management techniques in distribution systems using an IEEE 33 bus test system in DigSILent PowerFactory software. It implements different demand side management approaches like incorporating distributed energy sources, load shifting, and valley filling. The distributed energy sources used are distributed generators and batteries. Load shifting is done by shifting different percentages of load to off-peak hours. Valley filling is analyzed for different cases. The results of these demand side management techniques are compared to the base IEEE 33 bus system in terms of improvements to voltage profile and losses. The effectiveness of each technique is evaluated based on the losses.
2.2_Microgrids PUC Regulatory Issues_Winka_EPRI/SNL Microgrid
2.2_Microgrids PUC Regulatory Issues_Winka_EPRI/SNL MicrogridSandia National Laboratories: Energy & Climate: Renewables
Presentation from the EPRI-Sandia Symposium on Secure and Resilient Microgrids: Microgrids PUC Regulatory Issues, presented by Michael Winda, NJ BPU, Baltimore, MD, August 29-31, 2016.Application of dc micro grids for integration of solar home systems in smart ...
The document describes a proposed AC-DC hybrid distribution network for integrating solar home systems into smart grids more efficiently. The network includes a DC microgrid connecting homes to a communal battery storage system at a DC substation. Each home would have a solar home energy management system (SHEMS) to control power flows and provide a user interface. The network is modeled and simulated in MATLAB/Simulink. Simulation results show the network can improve reliability and optimize operation by reducing conversion losses and making better use of solar power and battery storage.
Arc Flash Considerations for Data Center IT Space
Do IT administrators violate arc flash requirements
when they turn off or reset a branch circuit breaker?
What about swapping out a rack power strip? Most
data center operators are familiar with fire safety and
shock hazard protection, but are less familiar with arc
flash safety. Three IT trends have increased the
severity of a potential arc flash in the IT space; higher
data center capacities, higher rack densities, and
higher efficiency designs.
This paper discusses these three trends in the context
of arc flash safety within the IT space. Arc flash is
explained, potential areas of concern in the IT space
are identified, and compliance with associated regulations
is discussed.
Br1507288491 gian brochure_psb
This one-week course discusses smart power flow controllers for smart grid applications. It will provide an overview of power flow control techniques, commonly used power flow controllers, and future trends. The course aims to familiarize participants with the basic principles of power flow control theory and its importance for the development of smart grids. It will include lectures delivered by an expert in designing power electronics-based flexible AC transmission systems controllers. The course also involves tutorials on modeling power systems using EMTP software. It is intended for utility engineers, researchers, and students with a background in electrical engineering.
Power Distribution
As a power distribution solutions provider, UGL Limited provides the foundation for green cities and energy efficient infrastructures. Learn more about its services.
Energy Storage 01
This document summarizes a study analyzing the power loss, efficiency, reliability, and cost of a 1 MW/500 kWh battery-based energy storage system for frequency regulation. The study calculates power losses from the battery and power conversion system components under different operating conditions. It then uses these loss calculations to determine the system's efficiency. Reliability is calculated using an Arrhenius life stress relation considering temperature. Total system cost is also broken down. Key findings include the system having 146 kW power loss and 85% efficiency at rated power. Mean time between failures is calculated as 8 years with 73% reliability after 1 year. Battery and power conversion system costs make up 58% and 16% of total cost respectively. Further research
emPower: Accurately Valuing Distributed Energy Resources
This document summarizes a review of 16 solar PV benefit and cost studies conducted between 2005-2013. Key insights include:
- No single study comprehensively evaluated all benefits and costs of distributed solar PV, though most acknowledged additional sources that were difficult to quantify.
- There was significant variation in estimated values across studies due to differences in local contexts, assumptions, and methodologies.
- Methodological differences that most affected results were analysis resolution/granularity, cost/benefit categories considered, and individual value calculation approaches.
- There was general agreement on estimating energy value but less consensus on other values like grid support services and unmonetized benefits.
- Important gaps remain around quantifying distribution system impacts, grid support
IRJET- A Comparative Study of Various Filters for Power Quality Improvement
This document discusses various filters that can be used to improve power quality by reducing harmonics and correcting power factor. It describes passive filters, shunt active power filters, and series active power filters. Shunt active power filters inject harmonic currents to cancel out load harmonics, while series active power filters generate compensating voltages. Both types of active filters require control schemes to generate the proper compensating signals. Passive filters use tuned filter branches to sink harmonic currents or block harmonic voltages. The document evaluates the compensation characteristics and control methods of different filter topologies to mitigate power quality issues like harmonics and reactive power.
Power Distribution Overview
Privatization of the Power Distribution in Delhi and the exciting challenges and how they were met, a practical experience.
40220140502001
This document summarizes an article from the International Journal of Electrical Engineering and Technology that discusses modernizing traditional grids into smart grids through renewable energy sources. It provides background on the motivation to transition to smart grids, including addressing environmental concerns from fossil fuels and the inability of traditional grids to integrate renewable energy. The document outlines key features of smart grids, including reliability, flexibility, efficiency, sustainability, and enabling new energy markets. It also discusses challenges to smart grids, such as differences between energy generation and demand, transmitting power across grids, ensuring energy security, and developing standards to allow different technology components to work together.
Grid Connected PV System with Power Quality Improvement Using Intelligent Con...
The depletion of the fossil fuel resources and the global warming effects has led the world to think
seriously of other alternative sources of energy. So renewable energy resources (RES) are being connected to
the distribution systems, mostly done by using power electronic converters. But use of power electronic
converters and non-linear loads like at distribution level injects harmonics, which intern cause power quality
problems. Distribution static compensator (DSTATCOM) is very popular in compensating power problems for
nonlinear and unbalanced loads. Any change in the load affects the DC-link voltage (DCLV) directly.
Conventionally, a PI controller is used to maintain the DCLV to the reference value, but its transient response
is poor. So, fuzzy logic controller is proposed which shows better dynamic response. To trigger inverter HCC
is used. The proposed inverter with the control when connected to wind energy, helps the 3-phase 4-wire
linear/non-linear unbalanced load at point of common coupling appear as balanced linear load to the grid.
With MATLAB/Simulink simulation studies, the proposed control technique is demonstrated and evaluated
here.
What's hot (20)
Power distribution planning_reference_book__second_edition__power_engineering...
Power distribution planning_reference_book__second_edition__power_engineering...
Webinar - Distributed and Renewable Power Generation
Webinar - Distributed and Renewable Power Generation
IRJET- Analysis of Demand Side Management of Distribution Systems
IRJET- Analysis of Demand Side Management of Distribution Systems
2.2_Microgrids PUC Regulatory Issues_Winka_EPRI/SNL Microgrid
2.2_Microgrids PUC Regulatory Issues_Winka_EPRI/SNL Microgrid
Application of dc micro grids for integration of solar home systems in smart ...
Application of dc micro grids for integration of solar home systems in smart ...
emPower: Accurately Valuing Distributed Energy Resources
emPower: Accurately Valuing Distributed Energy Resources
IRJET- A Comparative Study of Various Filters for Power Quality Improvement
IRJET- A Comparative Study of Various Filters for Power Quality Improvement
Grid Connected PV System with Power Quality Improvement Using Intelligent Con...
Grid Connected PV System with Power Quality Improvement Using Intelligent Con...
Similar to Fueling a digital society
Singapore Smart Grid From Concept to Reality Slides.pdf
This document provides an overview of a two-day course on smart grids. Day 1 will introduce smart grids and include case studies from the UK. It will also cover energy storage integration and demand side response. Day 2 will discuss active network management, advanced power flow, and the integration of renewable energy sources. Speakers include professors and doctors discussing various technical aspects of smart grids.
AI documention _merged.pdf
This document discusses the concept of intelligent substations in power distribution systems. It describes how intelligent substations utilize digital and information technologies to integrate monitoring, control, and protection systems. Key features include sharing information over an optical bus, remote monitoring of equipment, and standardized interfaces between devices from different vendors. The document also outlines various power system control applications that could benefit from intelligent techniques, such as generation scheduling, voltage control, security assessment, and emergency control. Devices like switchgear, transformers, and protection and control equipment can all contribute to building intelligent substations through integrated monitoring and control.
220 kv Sub- Station By Akshit Jain Majhola Moradabad .docx
industrial traing report on 220 kv sub station majhola Moradabad
With the help of this you will better understating about the power stations , its distribution and how are they working with its higher efficiency.
DGK - Resume (Final)
Danish Gul Khan is an electrical engineer from Pakistan with over 7 years of experience. He has a Master's degree in Electrical Engineering and has worked on projects involving electrical system design, transmission and distribution, substation maintenance, and smart grid implementation. His experience includes working as an Assistant Manager at K Electric and as an Assistant Superintendent at Karachi Shipyard and Engineering Works.
Muhammad talha cv
Muhammad Talha is an electrical engineer with over one year of experience working at a HVDC converter station. He has a B.E. in Electrical Engineering from Mehran UET jamshoro with a CGPA of 3.75/4.00. Currently, he works as a trainee engineer at Pak Matiari-Lahore Transmission Company, where his responsibilities include ensuring safe and reliable operation of the power complex, monitoring equipment effectiveness, maintaining records and reports, and assisting with installation, testing, and commissioning activities. He is a motivated team player with strong problem solving, analytical, and soft skills.
prathi resume (1)
Pradheepa N provides her curriculum vitae, including her contact information, career objective, work experience, academic qualifications, software skills, areas of interest, industrial exposure, co-curricular activities, and an electrical engineering project on DC-DC energy conversion using resonant converters. She has 6 months of experience working for a game development company. Her academic qualifications include a B.E. in Electrical and Electronics Engineering from Karpaga Vinayaga College of Engineering and Technology. Her skills include programming languages like C, HTML, CSS, JavaScript, jQuery, PHP and MySQL.
Role of substation in smart grid
Role of substation in smart grid
Substations are an essential component of the smart grid and help address challenges related to energy demand, security, and the environment. The smart grid uses two-way communication and advanced control methods to integrate generators, consumers, and prosumers. This allows for a more efficient, sustainable, and secure electricity supply. Smart substations use new sensing, metering, communication, and control technologies to transform the grid and help integrate increasing amounts of renewable energy and power exchanges in response to policy drivers around economic competitiveness, reliability, customer empowerment, and environmental sustainability.
Smart grid'
since our electrical system consists of many interconnections .in order to have a proper transmission we need grid if we incorporate some sensors it results in smart grid .today grid system consists of all interconnection tapping points
Doc a.7-tlc report
This document is a project report on a microcontroller based traffic light controller. It describes the development of a traffic light controller that uses a microcontroller and LEDs to automatically control traffic lights on a centralized basis. The microcontroller is programmed to adjust the timing and phasing of the traffic signals to meet changing traffic conditions. The circuit uses basic electronic components like an LED for the traffic lights and a microcontroller for automatic signal changing after a preset time interval. It aims to provide a reliable and cost-effective traffic light control solution.
OM PRAKASH.pptx
This document discusses power quality issues, their causes and impacts. It outlines several power quality problems like voltage sags, harmonics, transients etc. and their major causes and consequences. It highlights the economic costs of power quality disturbances and issues. The document also presents several solutions to mitigate power quality problems at the transmission, distribution and end-use levels. These include use of distributed energy resources, energy storage systems, power conditioning equipment and making equipment less sensitive. It emphasizes that ensuring high quality power is important for modern society and selection of less sensitive equipment can play a key role in preventing power quality problems.
DESIGN
Mohammad Zaffer Equbal seeks to become the best engineer in the world. He has over 6 years of experience as an electrical design engineer working on oil, gas, and infrastructure projects according to international standards. His experience includes producing electrical engineering designs, sizing and selecting electrical equipment, and ensuring compliance with hazardous area standards. He holds qualifications in electrical engineering and has received specialized training.
1.1_Power Systems Engineering R&D_Ton_EPRI/SNL Symposium
1.1_Power Systems Engineering R&D_Ton_EPRI/SNL SymposiumSandia National Laboratories: Energy & Climate: Renewables
The document discusses the Office of Electricity Delivery and Energy Reliability's (OE) efforts to modernize the electric grid and ensure its resilience. Key points:
- OE leads the Department of Energy's work to maintain a reliable, flexible electric system and serves as the energy sector lead during federal emergencies.
- OE is working to develop a future grid that provides clean, affordable, and customizable electricity through projects like microgrid R&D and developing advanced distribution management systems.
- Microgrids are seen as integral to making cities smarter by providing reliability and resiliency during extreme events through integrating distributed energy resources and controls.Electrical_Engineer_CV
Elhassan Mahmoud Anwar has over 7 years of experience in electrical installation, start up, and commissioning of electrical equipment in various industries. He holds a Bachelor's degree in Power and Electrical Machines and is a PMP certified project manager. His experience includes managing electrical projects, designing electrical systems, installing and testing equipment, and commissioning completed systems. He is skilled in project management, electrical design, and troubleshooting electrical issues.
Digital testing of high voltage circuit breaker seminar ppt
The document discusses digital testing of high voltage circuit breakers. It begins with an introduction to circuit breakers and their essential qualities and need for testing. It then describes the process of digital testing which involves high resolution measurement of voltage and current during critical periods using advanced sensors and digital signal processing. This allows evaluation of circuit breaker performance under different conditions through simulation software. The advantages of digital testing include reducing full scale testing needs and identifying network issues.
Resume (1)
This document is a resume for an electrical engineer seeking a new challenging position. It summarizes the candidate's educational qualifications including a B-Tech in electrical engineering, work experience as an electrical engineer and shift in-charge at a sugar factory, technical skills in electrical systems maintenance and operation, and personal details.
Advance Electrical system Design and solar power plant design courses
Advance Electrical system Design and solar power plant design courses Advance Electrical Design &Engineering Institute
Advance Electrical Design & Engineering Institute (AEDEI) ISO 9001:2008 Certified Institute of Electrical Design & Engineering training programs for Dedicated to Electrical Engineers . AEDEI is latest venture for providing the quality education in the best possible facilities is a key aim of Skill developments for various verticals in Electrical Engineering design.
ELECTRICAL SYSTEM DESIGN COURSE : Our trained Electrical Design Engineers working in various filed of Electrical industries (Design & Engineering, develops and supervises the manufacture, installation, operation and maintenance of equipment, machines and systems for the generation, distribution, utilization and control of electric power More..
SOLAR POWER PLANT DESIGN & ENGINEERING COURSE : The most significant future of solar energy is that it clean energy does not harm environments
TECHNICAL TRANSFORMER DESIGN COURSE : Transformer Design tool assists design engineers in choosing the most appropriate core material and size for a number of turn ratio and housing ELECTRICAL ENGINEER CV, SITE ENGINEER CV, PROJECT ENGINEER CV
This document is a resume for Ajith Chandramohan, an electrical engineer seeking a position in a reputable organization. It summarizes his educational and professional qualifications. He has a Master's degree in power systems and a Bachelor's degree in electrical engineering. His over 3 years of experience includes project engineering roles in testing and commissioning electrical equipment for various construction projects in India and the UAE. He is proficient in testing switchgear, transformers, and other electrical components.
CV ENGLISH Feb2016 - Copy
This document contains a resume for Shraf eldin Sati Shampool Abdelgader. He has a Bachelor's degree in Electrical Engineering from Sudan University of Science and Technology, and is currently working as a Real Time Transmission Operation Engineer for Sudanese Electricity Transmission Co. His responsibilities include maintaining reliability of the power system, controlling power flow, carrying out switching operations safely, and restoring power during blackouts. He has over 5 years of experience and has completed several professional training courses in areas like power system operation, protection, and engineering.
C.V Resume Muimu Daniel.doc (110916)
Muimu Daniel is applying for an electrical engineering position. He has over 20 years of experience in electrical maintenance and installation work for companies such as Econet Wireless Zimbabwe, Zimbabwe Electricity Transmission & Distribution Company, Dairibord Zimbabwe, and the Ministry of Justice. He holds qualifications in electrical power engineering and has experience with generators, switchgear, automation systems, and more. He is seeking a role where he can continue developing his skills and contributing to safety and sustainability.
update 1
Muhammad Asim is applying for positions in the organization that match his qualifications and experience. He has a bachelor's degree in electronics engineering and field experience in electrical and mechanical projects. His areas of expertise include testing and commissioning, instrumentation, BMS/BACS, DCS, and HMI. He is seeking a position as an electrical or BMS engineer where he can utilize his skills and contribute to organizational goals.
Similar to Fueling a digital society (20)
Singapore Smart Grid From Concept to Reality Slides.pdf
Singapore Smart Grid From Concept to Reality Slides.pdf
220 kv Sub- Station By Akshit Jain Majhola Moradabad .docx
220 kv Sub- Station By Akshit Jain Majhola Moradabad .docx
1.1_Power Systems Engineering R&D_Ton_EPRI/SNL Symposium
1.1_Power Systems Engineering R&D_Ton_EPRI/SNL Symposium
Digital testing of high voltage circuit breaker seminar ppt
Digital testing of high voltage circuit breaker seminar ppt
Advance Electrical system Design and solar power plant design courses
Advance Electrical system Design and solar power plant design courses
ELECTRICAL ENGINEER CV, SITE ENGINEER CV, PROJECT ENGINEER CV
ELECTRICAL ENGINEER CV, SITE ENGINEER CV, PROJECT ENGINEER CV
More from abhisek das
pedal powered washing machine report
This document provides information about a pedal powered washing machine project completed by a group of mechanical engineering students. It includes sections on the introduction, history of washing machines, types of washing machines, working principles, and a description of their pedal powered washing machine design project. The group designed a washing machine that uses human power from pedaling rather than electricity to operate, with the goal of providing an environmentally friendly option.
Major project
This document describes a pedal-powered washing machine designed by a group of mechanical engineering students. It consists of a drum mounted horizontally inside an outer tub. Clothes are loaded through a front door. Turning pedals powers a chain drive that rotates the drum, agitating clothes in water to clean them. It is intended for rural areas as an efficient alternative to manual washing that uses locally available recycled bicycle parts, conserving water and detergent. Analysis shows it can effectively clean clothes with minimal human power in under an hour.
Windmill
This document describes the design of a wind turbine for power generation. It includes sections on the generator, blades, hub, tower height, connection to the electric grid, and safety concerns. The generator is a permanent magnet DC motor that converts the mechanical energy of the rotating blades into electrical energy that is stored in a battery. When the battery output is connected to LED lights through a switch, the lights will power as the turbine blades are rotated by the wind, functioning as a simple wind-powered street light.
Windmill
The document discusses the design and components of a wind turbine for power generation. It describes the key parts of a wind turbine including the generator, blades, hub, tower, and how it is connected to the electric grid. The generator converts the kinetic energy of the rotating blades into electrical energy. Blades are made of composite materials and their shape and count are optimized for aerodynamic efficiency. The tower needs to be tall to access stronger winds higher above the ground.
Alcohol as an alternative fuel in s 2
This document discusses using alcohol as an alternative fuel in spark ignition engines. It outlines that E85 fuel is a blend of 85% ethanol and 15% gasoline that can be used in flexible fuel vehicles. The document also discusses the properties of ethanol including its production from crops, blending with gasoline, use as an octane booster, and ability to reduce greenhouse gas emissions compared to gasoline. It notes both advantages, such as higher octane ratings, and disadvantages, like lower energy content, of using alcohols like ethanol as a vehicle fuel.
Sazz
The document discusses autonomous or self-driving cars. It describes how autonomous cars use sensors like LIDAR, radar, cameras and ultrasonic sensors along with GPS and an inertial measurement unit to navigate without human intervention. The central computer combines data from these sensors to construct a 3D map of the vehicle's surroundings and control systems like steering and braking. Major companies developing autonomous vehicle technology include Google, Audi, BMW, Ford and General Motors.
1221204031 hydraulic braking system
The document discusses the hydraulic braking system. It describes how the braking system works by converting kinetic energy into heat energy through friction between a moving and non-moving surface at each wheel. It identifies the main components of a hydraulic braking system as the brake pedal, brake booster, master cylinder, and wheel cylinder. It explains that applying force to the brake pedal creates pressure in the master cylinder which is transmitted through fluid to the wheel cylinders to engage the brakes.
More from abhisek das (7)
Recently uploaded
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
Recently uploaded (20)
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Fueling a digital society
- 1. PARALA MAHARAJA ENGINEERING COLLEGE [Year] [Type the document title] SUBMITTED BY:- LALATENDU SWAIN [ T Y P E T H E C O MP A N Y A D D R E S S ]
- 2. CERTIFICATE This is to certify that Mr. LALATENDU SWAIN(REGISTRATION NO-1101109145) of B.Tech 7th Semester / Final Year of Electrical Engineering Branch has been found satisfactory in the continuous internal evaluation of Seminar entitled “TOPIC NAME” for the requirement of B.Tech Programme in ELECTRICAL ENGINEERING under BIJU PATNAIK UNIVERSITY OF TECHNOLOGY, ODISHA for the academic year 2014-2015. LALATENDU SWAIN REGN. NO-1101109145
- 3. ACKNOWLEDGEMENT It is my proud privilege to epitomize my deepest sense of gratitude and indebtness to my guide, DR.DEBASISH RATH, Lecturer in Elect. Dept. for his valuable guidance, keen and sustained interest, intuitive ideas and persistent endeavor. His inspiring assistance, laconic reciprocation and affectionate care enabled me to complete my work smoothly and successfully. I acknowledge with immense pleasure the sustained interest, encouraging attitude and constant inspiration rendered by Prof.(Dr)B.B MAHARATHI, Principal,PMEC. His continued drive for better quality in everything that happens at PMEC and selfless inspiration has always helped us to move ahead. LALATENDU SWAIN REGN. NO-1101109145
- 4. DECLARATION I hereby declare that Seminar work entitled “LALATENDU SWAIN”, submitted to Department of Electrical Engineering, PMEC Engineering College, BERHAMPUR is an original work done by me. This report is submitted in partial fulfillment of the requirement for degree of Bachelor of Technology in Electrical Engineering. The opinion and conclusions arrived at, are my own responsibility and views expressed in this report do not represent the views of any individual. LALATENDU SWAIN REGN. NO-1101109145
- 5. Introduction …imagine a modern paper mill without electricity… • Conversion into work – 100% efficiency – Controllable – Precise
- 6. • Lightning – Clean – High quality • Electrochemistry – Metals • Renewable energy sources – Wind power, hydro power, photovoltaic's • ICT – Processing – Transmission – Storage
- 7. Outline Introduction World power generation Power engineering and ICT Electricity Technology Roadmap Power System Complexity Transmission System Power Electronics in Distribution Network • Self-sustaining Micro Grids • Distributed resources (DR) • Materials and devices • Power electronics
- 8. World power generation • New production 1997- 2020: 127 GW/year (350 MW/day) • Sustainable?
- 10. Power engineering and ICT
- 11. Industrial driver is Automation The integration of measurement, control, and information technologies to manage a process, equipment, or a complex system. A means to improve the quality, productivity, safety, and consistency of a repetitive or a foreseen series of operations. A controlled operation of an apparatus, process, or system by mechanical or electronic devices that is replacing or supervening human organs of observation, effort, and decision.
- 12. Electricity Technology Roadmap • Collaborative initiative initiated by EPRI (Electric Power Research Institute) • 150 organizations participated (mainly US) • Formed the “Consortium for Electric Infrastructure to Support a Digital Society” – CEIDS • Definition of Roadmap Destinations: • Strengthening Power Delivery Infrastructure • Enabling customer-managed service networks • Boosting economic productivity and prosperity • Resolving the energy/carbon conflict • Managing the global sustainability challenge Funding need: $5b/year
- 14. Transmission system • Congestion management • Sensors – smart network • Real-time analysis • Wide-area protection • Self-healing • FACTS • HVDC
- 15. Power electronics in distribution network • Outage time reduced from one hour to some milliseconds 22 kV bus-bar PE switch PE switch 22:0,23 kV Circut Breakter Circut Breaker Consumers
- 16. Distributed resources Power generation, energy storage, or load management located close to end users Materials and devices • Increased field strength for AC cables • Extruded cables in HVDC • Increased temperature • Superconductor cables • PM motors to replace induction motors in drives • Reduced cost, size and weight
- 17. Power electronics • Key technology for advances in power industry. • Loss reduction Transformers • Increased device voltage (SiC, others) • Cost reduction (7%/year) • New devices (super junction) • New role in power distribution Norway: Marine and offshore applications • 10% global marked share • Electric propulsion • Oil and gas production subsea • World class technology
- 18. Reference www.wikipedia.com www.studentsbux.in www.yahoo.in www.seminarsonly.com www.1000projects.org