Muhammad Asim is applying for positions in the organization that match his qualifications and experience. He has a bachelor's degree in electronics engineering and field experience in electrical and mechanical projects. His areas of expertise include testing and commissioning, instrumentation, BMS/BACS, DCS, and HMI. He is seeking a position as an electrical or BMS engineer where he can utilize his skills and contribute to organizational goals.
Operations and Maintenance, Low Voltage, team player, operation maintenance and testing, corrective maintenance, ULP, Programmable Logic Controller, Planned Maintenance, , Medium Voltage, Maximo, Improvement maintenance and troubleshooting of electrical cabinet and modification, Fibre Optic Cable, Ethernet Switches, CCTV, BMS Engineer
operation maintenance department. Supervision of fire fighting system (Addressable & Conventional system), monitoring CCTV cameras and controlling of speed gates. Also monitoring HVAC zone equipments. * Maintain Job Schedules on Daily and Weekly basis.
Operations and Maintenance, Low Voltage, team player, operation maintenance and testing, corrective maintenance, ULP, Programmable Logic Controller, Planned Maintenance, , Medium Voltage, Maximo, Improvement maintenance and troubleshooting of electrical cabinet and modification, Fibre Optic Cable, Ethernet Switches, CCTV, BMS Engineer
operation maintenance department. Supervision of fire fighting system (Addressable & Conventional system), monitoring CCTV cameras and controlling of speed gates. Also monitoring HVAC zone equipments. * Maintain Job Schedules on Daily and Weekly basis.
BE-ELECTRICAL SENIOR TESTING AND COMMISSIONING ENGINEERGanesan Raja
I HAVE SUCCESSFULLY TESTING AND COMMISSIONED 415 V TO 765KV SYSTEM OF SUBSTATION AND GENERATION POWER PLANTS,CEMENT PLANTS INCLUDING GAS INSULATION SUBSTATION
Testing & Commissioning Engineer | Power Supply Tech. | Traction Rail Power |...Sanil Balakrishnan
8+ yrs of GCC exp. as electrical engineer with proficiency in testing & commissioning, operation & maintenance @ traction rail industry, oil & gas and in power plants.
BE-ELECTRICAL SENIOR TESTING AND COMMISSIONING ENGINEERGanesan Raja
I HAVE SUCCESSFULLY TESTING AND COMMISSIONED 415 V TO 765KV SYSTEM OF SUBSTATION AND GENERATION POWER PLANTS,CEMENT PLANTS INCLUDING GAS INSULATION SUBSTATION
Testing & Commissioning Engineer | Power Supply Tech. | Traction Rail Power |...Sanil Balakrishnan
8+ yrs of GCC exp. as electrical engineer with proficiency in testing & commissioning, operation & maintenance @ traction rail industry, oil & gas and in power plants.
I am working as a Electrical Commissioning Engineer / CompEx Inspector/QAQC Engineer for the 14 years Experience and happy to mention some of my achievements in this role
1. Muhammad Asim
CNIC # 42201-8516273-1
Address Gulistan-e-jauhar Karachi, Pakistan
Nationality Pakistani
Skype ID Khurram.shaikh52
E-mail asimshaikh26@yahoo.com
Contact # +92300-2166199
Areas of Strength and Interest
I am enclosing my CV along with this cover letter for your kind consideration. I am interested in applying for
the positions in your organization which are according to my qualification and Experience. I have done my
Graduation in Electronics Engineering from University of PAF-KIET).I have a Field experience in Electrical
and mechanical side because I am working in an electromechanical Projects Operation & maintenance. I have
my all educational documents attested and verified by Saudi council, Saudi culture ,HEC,PEC and foreign
affairs.
I have a particular Interest in working for your organization and would appreciate being considered as a
candidate for employment. You will find me to be well spoken, energetic and confident. I personally perform
even the most menial task to remove project obstacles and get the job done. I enjoy working within a team to
achieve outcomes that meet and hopefully exceed the expectations of client and my employers. I am a very
ethical person and believe that my strongest traits are my organization, motivations and honesty.
I look forward to you kind response.
Thanks you for your time and consideration.
Sincerely,
Eng. Muhammad Asim
Testing And Commissioning
Instrumentation
BMS / BACS
DCS &, HMI
2. Muammad Asim
Contact #: +92-300-2166199
Address: Gulistan e Jauhar,karachi Pakistan
Nationality: Pakistani
Skype ID: Khurram.shaikh52
asimshaikh26@yahoo.com
OBJECTIVES
To gain the position of an Electrical/ BMS Engineer in an organization that will provide me an opportunity
to utilize my skills and experience towards professional growth and development in parallel with fulfilling
the organizational goals.
EDUCATION
BE in Electronic Engineering from PAF-KIET University of Engineering and Technology (2008-2012)
PEC Online Verification No. ELECTRO/18962.
DAE in Electronics From Jamia Millia College (2005-2007)
EXPERIENCE
PROFESSIONALCAREER
I was indulged in Testing and commissioning of Electrical power substation Equipment’s like Power Transformer,
Current Transformer, Voltage Transformer, High Voltage Breaker,Dis Connector Switches, Earthing Switches,
Protection Relays, MCCB , MCB Service Transformers,Dry Type Transformer, VCB Breakers,ACDB,DCDB
Panel’s and its Auxilaries, ATS, Service Transformers, Scheme checking of all protection panels (T/f , bus bar ,stub ,
BFR and TCS, synchronous, RTCC, LINE,Auto Re closer, Shunt Reactor ,Circuit Breaker Closing, Tripping Circuit,
SOE, SCADA ,TFR, Annunciation and Mosaic Panel’s),Interlocking testing from mosaic panels, Secondary injection
test, Loop Checking of CT with and without cct,Stability test of all Bus Bar and Transformers primary Injection Test.
SAUDI SERVICES GROUP
HOLY HARAM MAKKAH
MAY 2014 –OCT 2015
ELECTRICAL ENGINEER
DUTIES AND RESPONSIBILITIES :
DGP panels.
ULP panels.
USDP panels.
Perform Instrumentation jobs.
Perform Hydraulics And Pneumatics jobs
Operation and maintenance of low voltage panels.
Improvement maintenance and troubleshooting of electrical cabinet and modification of plc application.
Operation and maintenance of low voltage equipments such as fans , lightening lamp.
11 KV VCBs with metering & Protections Installation & Its testing
Working on Hydraulic System, Hydraulic Machineries, Pneumatic and Hydraulic Valves. Installation of
Compressors as per requirements.
Testing of Phase ReversalPanel,ATS/AMF Panels,and Star/Delta for Motors.
Control the Circuit Breakers,Status display on HMI through PLC & HMI programming.
Communicate multiple digital meters (Energy Analyzer) through software using RS232 & RS485 protocol.
Supervise the plant operation maintenance, and department team members.
3. Create and maintain Preventive maintenance, corrective maintenance, material issuance and other work permits
regarding maintenance trough MAXIMO and Oracle
K-ELECTRIC
AUG 2012– MAY 2014
TESTING AND COMMISSIONING ENGINEER
132/11kv 20/26MVA power transformer near bin qasim station.
220/132kv 63MVA power transformer korangi thermal power station.
Duties and Responsibilities :
Managing daily technical activities, emergency repairs, and maintenance with all safety precautions.
Coordinate with clients to ensure their satisfaction on quality & progress.
Preparing Preventive Maintenance Schedules & Maintaining Documents.
Preparing Daily & Monthly reports of Power Consumption.
Operation & maintenance of 11KV panels.
Operation & maintenance of Transformers, HV & LV Breakers.
Maintenance of MV SF6, Vacuum circuit breakers.
Be aware of protections relays of feeder and transformers e.g. overcurrent, earth fault, differential, restricted
earth fault, bouchelz etc.
Operation & maintenance of sub-station & Ring Main Units.
Operation & maintenance of machines & Power factor correction.
Transformer off load tap changing due to high & low voltage.
Power Transformers protection relays tests.
POWER TRANSFORMER
1) Insulation Resistance Test
2) Winding Resistance Test
3) Vector Group Test
4) Ten-Delta test
5) Transformer Oil Test
6) Bucholz Relay Test
7) Ratio Test
CURRENT TRANSFORMER
1) Insulation Resistance Test
2) Winding Resistance Test
3) Ratio test
4) Magnetizing Current Test
5) Polarity Test
6) Primary Injection Test
7) Secondary Injection Test
POTENTIAL TRANSFORMER TEST
1) Insulation Resistance Test
2) Winding Resistance Test
3) Ratio test
4) Polarity Test
5) Primary Injection Test
6) Secondary Injection Test
CIRCUIT BREAKER TEST
1) Contact Resistance Test
2) Insulation Resistance Test
3) Timing Test
4) High Voltage Test
4. TelenorPakistan
SEP 2011– Aug 2012
Designation: BMS Engineer/FacilityCordinator
To monitor for faults on HVAC systems and to coordinate with Electrical and Mechanical departments to rectify
the issues and faults.
Coordination with technical section, the supplier and consultant for all project BMS work.
Installation supervision of project works for electronics mechanical equipment all raceways ,EMT conduits and
cable trunking for all project areas,all lighting and emergency lighting panel, main distribution boards, AHUs and
FCU BMS controllers,
Control and Maintenance of the Plant Instrumentation & Control.
Control Loop Checking and Testing.
Calibration of field instruments like Temperature/pressure/Flow/Level.
Handle the responsibilities of control system checkout, tuning and set-up.
Able to read Instrument Data Sheets for various Field Instruments, Preparation of instrument list.
Maintained and modified existing systems.
Knowledge of motors, Drives, star/delta starters,PNP & NPN sensors and their interfacing, relay logic, ladder
logic, Electrical schematics,proximity switches, Timers and counters
Fire suppression system using water mist and fog.
Ensuring that the filters of AHU’s are clean.
Produce written reports, as required, that clearly detail the performance of the BMS and ensure that issues have
been identified and appropriate maintenance is undertaken.
Undertake PPM tasks on HVAC controls systems as directed and required.
Checking daily log sheets of centrifugal Chillers.
Ensure all energy saving measures for building as mentioned are installed, maintained, and modified accordingly.
Meeting every week with client and discuss about the performance of BMS Department.
Preparing specifications for the materials and equipment to be purchased.
Calibration of all control equipment.
Perform Automation & Control(PLCs)
Perform Instrumentation jobs
Perform Hydraulics And Pneumatics jobs
Create and maintain Preventive maintenance, corrective maintenance, material issuance and other work permits
regarding maintenance schedule.
Languages
English
Arabic
Internship
Pakistan Aeronautical Complex Kamra 26thDEC 2011-15thJAN 2012
(Avionics Production Factory)
► Electronic Assembly ►CNC Machines ►R&D Department
5. Pakistan International Airlines JUN 2010-AUG 2010
(Aircraft Maintenance Hangar/Overhaul Shops)
► PCB Stuffing ► Avionics Services ►Engine overhauling