Configuration of mail server on cisco packet tracer
•
0 likes•189 views
The document provides instructions for configuring a mail server on Cisco Packet Tracer by opening the software and selecting two servers, one switch, and four PCs. It describes configuring each device one by one according to pictures to set up the mail server. Finally, the document confirms that mail can be received from the sender once configuration is complete.
Report
Share
Report
Share
Download to read offline
Recommended
Mail server on using cisco packet tracer
This document provides instructions for setting up a mail server on Cisco Packet Tracer. It describes connecting 4 PCs and 2 servers - a mail server and DNS server - via a single switch. It explains assigning IP addresses in the same network and configuring the mail server and DNS server, including enabling SMTP, POP3, and DNS services and creating user accounts. Finally, it describes testing email functionality by sending a message between two accounts.
4.4.1.3 packet tracer configuring a zone-based policy firewall (zpf) instru...
This document describes how to configure a zone-based policy firewall (ZPF) on router R3 to allow internal hosts to access external resources while blocking external hosts from accessing internal resources. It involves verifying basic network connectivity, creating firewall zones, defining traffic classes and access lists, specifying firewall policies, applying policies to zone pairs, and testing functionality from the internal and external zones.
Mail server on cisco packet tracer
This document provides instructions for configuring a mail server on Cisco Packet Tracer. It involves setting up 4 PCs, a mail server, and a DNS server connected by a switch. IP addresses are assigned to each device on the same subnet. The mail server is configured with a domain name and SMTP/POP3 services enabled. Usernames and passwords are created. The DNS server is then configured with the same domain name and IP address as the mail server. Users are then able to send and receive emails between PCs using the mail server after setting up their mail client with the credentials created on the mail server.
Email server configuration on cisco packet tracer
Mail server configuration on cisco packet tracer. We configured the mail server on the cisco packet tracer.
CCNA SUMMER TRAINNING PPT
This document provides an overview of managing a Cisco network. It discusses CCNA certification which validates skills in installing, configuring, operating and troubleshooting switched and routed networks. It also covers topics like internetworking which connects different networks, IP addressing classes, subnetting to increase networks, routing protocols like RIP, EIGRP, OSPF, switching, VLANs, interVLAN routing, and STP to prevent network loops.
Wan configuration in packet tracer by Tanjilur Rahman
This document provides instructions for creating a simple wide area network (WAN) in Cisco Packet Tracer by connecting laptops, PCs, switches, and routers. It outlines 11 steps to properly configure the network components and their IP addresses, enable RIP routing on the routers, and confirm the successful WAN configuration by pinging devices across the network with 0% packet loss.
Router configuration in packet tracer
- Packet Tracer is a program used to illustrate basic network concepts and allow users to build and test networks in real-time.
- A router is a networking device that connects different networks and selects the best path to forward packets between them based on its routing table. Cisco is the leading manufacturer of routers.
- There are different modes that allow administrators to monitor and configure routers, including setup, user, privileged, global configuration, and interface modes. Static and dynamic routing can be configured to determine the best paths between networks.
DMVPN
The document describes the configuration of a Dynamic Multipoint Virtual Private Network (DMVPN) using three phases. Phase 1 establishes IPsec and IKE tunnels between the hub router and spoke routers using EIGRP routing. Phase 2 optimizes the configuration by removing split horizon and enabling next hop self. Phase 3 enables features like NHRP redirect and shortcut to optimize network traffic flow.
Recommended
Mail server on using cisco packet tracer
This document provides instructions for setting up a mail server on Cisco Packet Tracer. It describes connecting 4 PCs and 2 servers - a mail server and DNS server - via a single switch. It explains assigning IP addresses in the same network and configuring the mail server and DNS server, including enabling SMTP, POP3, and DNS services and creating user accounts. Finally, it describes testing email functionality by sending a message between two accounts.
4.4.1.3 packet tracer configuring a zone-based policy firewall (zpf) instru...
This document describes how to configure a zone-based policy firewall (ZPF) on router R3 to allow internal hosts to access external resources while blocking external hosts from accessing internal resources. It involves verifying basic network connectivity, creating firewall zones, defining traffic classes and access lists, specifying firewall policies, applying policies to zone pairs, and testing functionality from the internal and external zones.
Mail server on cisco packet tracer
This document provides instructions for configuring a mail server on Cisco Packet Tracer. It involves setting up 4 PCs, a mail server, and a DNS server connected by a switch. IP addresses are assigned to each device on the same subnet. The mail server is configured with a domain name and SMTP/POP3 services enabled. Usernames and passwords are created. The DNS server is then configured with the same domain name and IP address as the mail server. Users are then able to send and receive emails between PCs using the mail server after setting up their mail client with the credentials created on the mail server.
Email server configuration on cisco packet tracer
Mail server configuration on cisco packet tracer. We configured the mail server on the cisco packet tracer.
CCNA SUMMER TRAINNING PPT
This document provides an overview of managing a Cisco network. It discusses CCNA certification which validates skills in installing, configuring, operating and troubleshooting switched and routed networks. It also covers topics like internetworking which connects different networks, IP addressing classes, subnetting to increase networks, routing protocols like RIP, EIGRP, OSPF, switching, VLANs, interVLAN routing, and STP to prevent network loops.
Wan configuration in packet tracer by Tanjilur Rahman
This document provides instructions for creating a simple wide area network (WAN) in Cisco Packet Tracer by connecting laptops, PCs, switches, and routers. It outlines 11 steps to properly configure the network components and their IP addresses, enable RIP routing on the routers, and confirm the successful WAN configuration by pinging devices across the network with 0% packet loss.
Router configuration in packet tracer
- Packet Tracer is a program used to illustrate basic network concepts and allow users to build and test networks in real-time.
- A router is a networking device that connects different networks and selects the best path to forward packets between them based on its routing table. Cisco is the leading manufacturer of routers.
- There are different modes that allow administrators to monitor and configure routers, including setup, user, privileged, global configuration, and interface modes. Static and dynamic routing can be configured to determine the best paths between networks.
DMVPN
The document describes the configuration of a Dynamic Multipoint Virtual Private Network (DMVPN) using three phases. Phase 1 establishes IPsec and IKE tunnels between the hub router and spoke routers using EIGRP routing. Phase 2 optimizes the configuration by removing split horizon and enabling next hop self. Phase 3 enables features like NHRP redirect and shortcut to optimize network traffic flow.
DMVPN configuration - Configuring Cisco dynamic Multipoint VPN - HUB, SPOKES,...
DMVPN configuration - Configuring Cisco dynamic Multipoint VPN - HUB, SPOKES, MGRE Protection and Routing
Ccnp workbook network bulls
This document contains information about routing protocols like EIGRP, OSPF, BGP and IPv6 routing. It discusses various topics such as configuring and tuning EIGRP parameters like timers, authentication and metrics. It also covers topics related to OSPF like network types, route filtering, summarization etc. Redistribution between protocols and IPv6 routing concepts are also mentioned. The document contains practical exercises for configuring various routing features on sample networks.
Introduction of dmvpn
Now we hear a word “DMVPN” more and more often, then what is “DMVPN” and what is the advantages DMVPN owning? Here we give a brief introduction of DMVPN.
Ccna Presentation
This document discusses networking devices and technologies used to connect local area networks (LANs) and wide area networks (WANs). It describes common physical layer components used in Ethernet LANs such as twisted pair cable, fiber optic cable, and connectors. It also discusses serial connection options and devices used for WAN connections including CSU/DSUs and their roles as data terminal equipment (DTE) and data circuit-terminating equipment (DCE).
Ccna ppt1
A PROJECT REPORT
On
CISCO CERTIFIED NETWORK ASSOCIATE
A computer network, or simply a network, is a collection of computer and other hardware components interconnected by communication channels that allow sharing of resources and information. Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote device, then the two devices are said to be in a network. Simply, more than one computer interconnected through a communication medium for information interchange is called a computer network.
Packet Tracer Tutorial # 2
This document provides instructions for configuring a network topology in Packet Tracer using 3 routers and 3 switches. It describes connecting the routers and switches with cables and configuring the IP addresses and default gateways for 6 PCs connected to the routers. It also includes directions for connecting the routers together with fiber cables and configuring RIP routing between the routers to establish communication between all devices on the 3 subnetworks.
Ccna new lab_manual_by_esp_team
This document provides instructions for setting up web and FTP servers on a single computer. It describes how to use the Internet Information Services (IIS) tool in Windows to create a web server and configure it with a website document folder. It then explains how to use IIS to similarly create an FTP server and specify its file path. Finally, it indicates how to verify the functionality of both servers from the local host computer. The steps provided configure basic file and web hosting on a single machine using IIS.
Cisco packet tracer router
This document provides steps to connect multiple networks in Cisco Packet Tracer using a router:
1. Set up networks and configure IP addresses on end devices and switches.
2. Connect switches to the router using cables and configure the router interface for each network with matching IP addresses.
3. Set the default gateway on all end devices to the router IP so devices on different networks can communicate.
Ospf.ppt
This document provides an overview of the Open Shortest Path First (OSPF) routing protocol. It describes OSPF's message encapsulation, packet types, neighbor discovery process using Hello packets, link state database and shortest path first algorithm, metric and cost calculation, and mechanisms for handling multi-access networks like designated router election. The objectives are to describe OSPF configuration and troubleshooting.
Rip 1 rip 2
http://www.cyberintelligents.in
info@cyberintelligents.in
https://www.facebook.com/cyberintelligents
https://in.linkedin.com/in/cyberintelligents/en
https://cyberintelligents.wordpress.com/
http://cyberintelligent.blogspot.in
+91 9876162698 +919988288019
http://trainingcyberintelligents.blogspot.com
https://cyberintelligentsnews.wordpress.com/
Chapitre 2: Modèle de référence OSI
Le chapitre Modèle de référence OSI est destiné pour les étudiants de la 1ère année Master MMCSI, Semestre 2.
Cisco nexus 7009 overview
The document provides information about the Cisco Nexus 7009 switch, including:
- It is a modular network switch with up to 9 slots that can support 336 10GbE or 1GbE ports.
- It uses up to 5 Crossbar Fabric Modules and 2 power supplies.
- The Nexus 7009 specifications section provides additional details about its hardware capabilities and supported interface speeds.
Protocole EIGRP
Présentation du protocole EIGRP
Fonctionnement, Algorithme DUAL, Structure, Configuration sur Cisco IOS, Routes résumées, EIGRP sur réseaux WAN, EIGRP Stubs, Sécurité, Vérification et Troubleshooting, EIGRP pour IPv6, Named EIGRP
Route Redistribution
Redistribution is necessary when routing protocols connect and must pass routes between the two.
Route Redistribution involves placing the routes learned from one routing domain, such as RIP, into
another routing domain, such as EIGRP.
While running a single routing protocol throughout your entire IP internetwork is desirable, multiprotocol routing is common for a number of reasons, such as company mergers, multiple departments
managed by multiple network administrators, and multi-vendor environments. Running different
routing protocols is often part of a network design.
designandimplementanetwork
This document provides instructions for designing and implementing a network with Packet Tracer, including: defining the network needs with servers, workstations, switches, and routers; connecting local area networks with routers and wide area network links; configuring IP addresses, subnets, and static routes; and testing connectivity between devices. The network will connect headquarters and a branch office across two locations.
Pace IT - Setting Up a SOHO Network
CompTIA exam study guide presentations by instructor Brian Ferrill, PACE-IT (Progressive, Accelerated Certifications for Employment in Information Technology)
"Funded by the Department of Labor, Employment and Training Administration, Grant #TC-23745-12-60-A-53"
Learn more about the PACE-IT Online program: www.edcc.edu/pace-it
IP forwarding architectures and Overlay Model
The document discusses different approaches to IP forwarding in routers, including:
1. Category 1 retains the same forwarding paradigm but improves performance by modifying internal architecture, like replacing bus backplanes with switch backplanes.
2. Category 2 simplifies lookup using short, fixed-length labels instead of long, variable-length IP prefixes, like using VCI/VPI in ATM networks.
3. The overlay model overlays an IP network onto an ATM network, essentially creating two network infrastructures. The peer model maintains a single network infrastructure using existing IP addresses to identify systems and set up ATM connections.
CCNA ppt Day 1
This document provides information about Cisco and the CCNA certification. It discusses Cisco as a company and their networking products. The CCNA certification focuses on routing, switching, security, service provider, and voice communication skills. The CCNA exam contains questions in drag and drop and simulation formats. The document also summarizes different types of computer networks, common networking devices, cable types, topologies and more.
Routage ospf
Ce document décrit le fonctionnement du protocole de routage OSPF ainsi que sa configuration sur les routeurs cisco
Configuration of bus topology in cisco packet tracer by Tanjilur Rahman
This document provides instructions for configuring a bus topology network in Cisco Packet Tracer. It involves selecting PCs, laptops and switches, configuring the devices with valid IP addresses, and testing connectivity by sending a message and pinging between devices. The configuration was successful with 0% packet loss, demonstrating a functioning bus topology network.
Configuration of hybrid topology in cisco packet tracer by Tanjilur Rahman
This document provides instructions for configuring a hybrid network topology in Cisco Packet Tracer, combining different local area network types. It outlines the steps to select PCs, laptops, switches, and a hub, configure their IP addresses, send a message between devices, and confirm connectivity with ping. The hybrid topology is successfully configured with 0% packet loss.
More Related Content
What's hot
DMVPN configuration - Configuring Cisco dynamic Multipoint VPN - HUB, SPOKES,...
DMVPN configuration - Configuring Cisco dynamic Multipoint VPN - HUB, SPOKES, MGRE Protection and Routing
Ccnp workbook network bulls
This document contains information about routing protocols like EIGRP, OSPF, BGP and IPv6 routing. It discusses various topics such as configuring and tuning EIGRP parameters like timers, authentication and metrics. It also covers topics related to OSPF like network types, route filtering, summarization etc. Redistribution between protocols and IPv6 routing concepts are also mentioned. The document contains practical exercises for configuring various routing features on sample networks.
Introduction of dmvpn
Now we hear a word “DMVPN” more and more often, then what is “DMVPN” and what is the advantages DMVPN owning? Here we give a brief introduction of DMVPN.
Ccna Presentation
This document discusses networking devices and technologies used to connect local area networks (LANs) and wide area networks (WANs). It describes common physical layer components used in Ethernet LANs such as twisted pair cable, fiber optic cable, and connectors. It also discusses serial connection options and devices used for WAN connections including CSU/DSUs and their roles as data terminal equipment (DTE) and data circuit-terminating equipment (DCE).
Ccna ppt1
A PROJECT REPORT
On
CISCO CERTIFIED NETWORK ASSOCIATE
A computer network, or simply a network, is a collection of computer and other hardware components interconnected by communication channels that allow sharing of resources and information. Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote device, then the two devices are said to be in a network. Simply, more than one computer interconnected through a communication medium for information interchange is called a computer network.
Packet Tracer Tutorial # 2
This document provides instructions for configuring a network topology in Packet Tracer using 3 routers and 3 switches. It describes connecting the routers and switches with cables and configuring the IP addresses and default gateways for 6 PCs connected to the routers. It also includes directions for connecting the routers together with fiber cables and configuring RIP routing between the routers to establish communication between all devices on the 3 subnetworks.
Ccna new lab_manual_by_esp_team
This document provides instructions for setting up web and FTP servers on a single computer. It describes how to use the Internet Information Services (IIS) tool in Windows to create a web server and configure it with a website document folder. It then explains how to use IIS to similarly create an FTP server and specify its file path. Finally, it indicates how to verify the functionality of both servers from the local host computer. The steps provided configure basic file and web hosting on a single machine using IIS.
Cisco packet tracer router
This document provides steps to connect multiple networks in Cisco Packet Tracer using a router:
1. Set up networks and configure IP addresses on end devices and switches.
2. Connect switches to the router using cables and configure the router interface for each network with matching IP addresses.
3. Set the default gateway on all end devices to the router IP so devices on different networks can communicate.
Ospf.ppt
This document provides an overview of the Open Shortest Path First (OSPF) routing protocol. It describes OSPF's message encapsulation, packet types, neighbor discovery process using Hello packets, link state database and shortest path first algorithm, metric and cost calculation, and mechanisms for handling multi-access networks like designated router election. The objectives are to describe OSPF configuration and troubleshooting.
Rip 1 rip 2
http://www.cyberintelligents.in
info@cyberintelligents.in
https://www.facebook.com/cyberintelligents
https://in.linkedin.com/in/cyberintelligents/en
https://cyberintelligents.wordpress.com/
http://cyberintelligent.blogspot.in
+91 9876162698 +919988288019
http://trainingcyberintelligents.blogspot.com
https://cyberintelligentsnews.wordpress.com/
Chapitre 2: Modèle de référence OSI
Le chapitre Modèle de référence OSI est destiné pour les étudiants de la 1ère année Master MMCSI, Semestre 2.
Cisco nexus 7009 overview
The document provides information about the Cisco Nexus 7009 switch, including:
- It is a modular network switch with up to 9 slots that can support 336 10GbE or 1GbE ports.
- It uses up to 5 Crossbar Fabric Modules and 2 power supplies.
- The Nexus 7009 specifications section provides additional details about its hardware capabilities and supported interface speeds.
Protocole EIGRP
Présentation du protocole EIGRP
Fonctionnement, Algorithme DUAL, Structure, Configuration sur Cisco IOS, Routes résumées, EIGRP sur réseaux WAN, EIGRP Stubs, Sécurité, Vérification et Troubleshooting, EIGRP pour IPv6, Named EIGRP
Route Redistribution
Redistribution is necessary when routing protocols connect and must pass routes between the two.
Route Redistribution involves placing the routes learned from one routing domain, such as RIP, into
another routing domain, such as EIGRP.
While running a single routing protocol throughout your entire IP internetwork is desirable, multiprotocol routing is common for a number of reasons, such as company mergers, multiple departments
managed by multiple network administrators, and multi-vendor environments. Running different
routing protocols is often part of a network design.
designandimplementanetwork
This document provides instructions for designing and implementing a network with Packet Tracer, including: defining the network needs with servers, workstations, switches, and routers; connecting local area networks with routers and wide area network links; configuring IP addresses, subnets, and static routes; and testing connectivity between devices. The network will connect headquarters and a branch office across two locations.
Pace IT - Setting Up a SOHO Network
CompTIA exam study guide presentations by instructor Brian Ferrill, PACE-IT (Progressive, Accelerated Certifications for Employment in Information Technology)
"Funded by the Department of Labor, Employment and Training Administration, Grant #TC-23745-12-60-A-53"
Learn more about the PACE-IT Online program: www.edcc.edu/pace-it
IP forwarding architectures and Overlay Model
The document discusses different approaches to IP forwarding in routers, including:
1. Category 1 retains the same forwarding paradigm but improves performance by modifying internal architecture, like replacing bus backplanes with switch backplanes.
2. Category 2 simplifies lookup using short, fixed-length labels instead of long, variable-length IP prefixes, like using VCI/VPI in ATM networks.
3. The overlay model overlays an IP network onto an ATM network, essentially creating two network infrastructures. The peer model maintains a single network infrastructure using existing IP addresses to identify systems and set up ATM connections.
CCNA ppt Day 1
This document provides information about Cisco and the CCNA certification. It discusses Cisco as a company and their networking products. The CCNA certification focuses on routing, switching, security, service provider, and voice communication skills. The CCNA exam contains questions in drag and drop and simulation formats. The document also summarizes different types of computer networks, common networking devices, cable types, topologies and more.
Routage ospf
Ce document décrit le fonctionnement du protocole de routage OSPF ainsi que sa configuration sur les routeurs cisco
What's hot (20)
DMVPN configuration - Configuring Cisco dynamic Multipoint VPN - HUB, SPOKES,...
DMVPN configuration - Configuring Cisco dynamic Multipoint VPN - HUB, SPOKES,...
More from TanjilurRahman6
Configuration of bus topology in cisco packet tracer by Tanjilur Rahman
This document provides instructions for configuring a bus topology network in Cisco Packet Tracer. It involves selecting PCs, laptops and switches, configuring the devices with valid IP addresses, and testing connectivity by sending a message and pinging between devices. The configuration was successful with 0% packet loss, demonstrating a functioning bus topology network.
Configuration of hybrid topology in cisco packet tracer by Tanjilur Rahman
This document provides instructions for configuring a hybrid network topology in Cisco Packet Tracer, combining different local area network types. It outlines the steps to select PCs, laptops, switches, and a hub, configure their IP addresses, send a message between devices, and confirm connectivity with ping. The hybrid topology is successfully configured with 0% packet loss.
Configuration of lan in cisco packet tracer by TAnjilur Rahman
This document provides instructions for configuring a local area network (LAN) in Cisco Packet Tracer. It involves selecting personal computers, laptops and a switch, configuring the devices, sending a message between them, and confirming connectivity with ping tests that show 0% packet loss, demonstrating the successful configuration of the LAN.
Star topology in packet tracer By Tanjilur Rahman
This document describes how to configure a simple star topology network in Packet Tracer by selecting PCs, laptops, and a hub. It explains that a star topology provides high data speeds but if the central hub fails, the entire network will go down. The steps shown configure the selected devices, send a message between them, and successfully ping between laptops to demonstrate the working star network topology.
Configuration of smart home in cisco packet tracer By Tanjilur Rahman
This document discusses configuring a smart home simulation in Cisco Packet Tracer, including connecting a home gateway, ceiling fan, window, fire sprinkler, siren, and smoke detector. Instructions are provided on configuring each device like the ceiling fan and window, connecting the home gateway for wireless access, and using a smart phone to control and monitor all connected devices.
Configuration of ring topology in packet tracer by Tanjilur Rahman
This document outlines the steps to create a simple ring topology network in Packet Tracer using laptops, PCs, switches and twisted pair cable. It involves selecting the devices, configuring the laptops by assigning them IP addresses, and then successfully sending a message from laptop0 to laptop1 and pinging from laptop3 to laptop1 with 0% packet loss, demonstrating that the ring topology network was correctly implemented.
Configuration of mesh topology in cisco packet tracer by Tanjilur RAhman
This document provides steps for creating a mesh topology network in Cisco Packet Tracer, where every device is connected to every other device. It involves selecting PCs or laptops, switches, and configuring the laptops with valid IP addresses. The final steps show sending a message from Laptop0 to Laptop2 and pinging from Laptop1 to Laptop4, with 0% packet loss, demonstrating the successful creation of the mesh network.
Dns server in packet tracer converted (labanna saha)
A DNS server translates domain names to IP addresses, allowing clients to access origin servers. The document provides instructions on configuring a DNS server in Packet Tracer:
1) Build a network topology with PCs and a server
2) Configure static IPs for each device and set the DNS server address
3) Enable DNS service on the server and define name-IP mappings for each host
4) Test domain name resolution by pinging hosts by name instead of IP.
Configuration of mail server on cisco packet trace
This document provides instructions for configuring a mail server on Cisco Packet Tracer, with 12 steps that include opening the software, selecting servers, switches and PCs, configuring each device one by one according to pictures, composing and sending an email from one PC, and receiving the email on another PC to confirm the successful configuration. The instructions were written by Tanjilur Rahman from City University Bangladesh.
Dns server in packet tracer by tanjilur rahman city university bangladesh
The document describes how to set up a DNS server in Packet Tracer to translate domain names to IP addresses. It involves building a network topology with a server and two PCs, configuring static IP addresses for each with the server acting as the DNS server, and testing domain name resolution by pinging hosts by name. When successful, the DNS service is resolving names to IP addresses correctly.
More from TanjilurRahman6 (10)
Configuration of bus topology in cisco packet tracer by Tanjilur Rahman
Configuration of bus topology in cisco packet tracer by Tanjilur Rahman
Configuration of hybrid topology in cisco packet tracer by Tanjilur Rahman
Configuration of hybrid topology in cisco packet tracer by Tanjilur Rahman
Configuration of lan in cisco packet tracer by TAnjilur Rahman
Configuration of lan in cisco packet tracer by TAnjilur Rahman
Configuration of smart home in cisco packet tracer By Tanjilur Rahman
Configuration of smart home in cisco packet tracer By Tanjilur Rahman
Configuration of ring topology in packet tracer by Tanjilur Rahman
Configuration of ring topology in packet tracer by Tanjilur Rahman
Configuration of mesh topology in cisco packet tracer by Tanjilur RAhman
Configuration of mesh topology in cisco packet tracer by Tanjilur RAhman
Dns server in packet tracer converted (labanna saha)
Dns server in packet tracer converted (labanna saha)
Configuration of mail server on cisco packet trace
Configuration of mail server on cisco packet trace
Dns server in packet tracer by tanjilur rahman city university bangladesh
Dns server in packet tracer by tanjilur rahman city university bangladesh
Recently uploaded
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Types of Herbal Cosmetics its standardization.
Physiology and chemistry of skin and pigmentation, hairs, scalp, lips and nail, Cleansing cream, Lotions, Face powders, Face packs, Lipsticks, Bath products, soaps and baby product,
Preparation and standardization of the following : Tonic, Bleaches, Dentifrices and Mouth washes & Tooth Pastes, Cosmetics for Nails.
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdRPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Top five deadliest dog breeds in America
Thinking of getting a dog? Be aware that breeds like Pit Bulls, Rottweilers, and German Shepherds can be loyal and dangerous. Proper training and socialization are crucial to preventing aggressive behaviors. Ensure safety by understanding their needs and always supervising interactions. Stay safe, and enjoy your furry friends!
Recently uploaded (20)
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Configuration of mail server on cisco packet tracer
- 1. Configuration of mail server on cisco packet tracer Labanna Saha City University, Bangladesh At First, we will open the cisco packet tracer & select two servers, one switch and four pcs. Then, configure the servers and pcs one by one with following the pictures.
- 7. At the last picture, we conform that, we can received the mail from sender.