Power Quality Improvement Using Cascaded H-Bridge Multilevel Inverter Based D...IJERA Editor
Cascaded multilevel configuration of the inverter has the advantage of its simplicity and modularity over the
configurations of the diode-clamped and flying capacitor multilevel inverters. This paper presents a threephase,
five-level and seven level cascaded multilevel voltage source inverter based active filter for power line
conditioning to improve power quality in the distribution network. The DSTATCOM helps to improve the
power factor and eliminate the Total Harmonics Distortion (THD) drawn from a Non-Liner Diode Rectifier
Load (NLDRL). The compensation process is based on concept of p-q theory. A CHB Inverter is considered for
shunt compensation of a 11 kV distribution system. Finally a level shifted PWM (LSPWM) and phase shifted
PWM (PSPWM) techniques are adopted to investigate the performance of CHB Inverter. The results are
obtained through Matlab/Simulink software package.
SRF THEORY BASED STATCOM FOR COMPENSATION OF REACTIVE POWER AND HARMONICSIAEME Publication
The power electronic devices like converters and inverters inject harmonic currents into AC
system due to their non linear characteristics. These devices draw high amount of reactive power
from source. The commencement of Nonlinear Load into the ac power system will have the effect of
harmonics. The presence of harmonics in system it will effected with power quality problems. Due
to this high amount of power losses and disoperation of power electronics devices is caused, along
with this Harmonics have a number of undesirable effects like Voltage disturbances. These
harmonics are needed to mitigate for Power Quality Enhancement in distributed system. Here the
device called STATCOM is one of the FACTS Devices which can be used to mitigate the harmonics
and reactive power compensation. The voltage source converter is core of the STATCOM and the
hysteresis current control is indirect method of controlling of VSC. In this paper we implement with
SRF based STATCOM control. SRF theory is implemented for the generation of controlling
reference current signals for controller of STATCOM. The Matlab\Simulink based model is
developed and simulation results are showed for linear and nonlinear load conditions.
Pi controller based of multi level upqc using dq0 transformation to improve p...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
The paper describes the single stage AC-AC converter. This converter is a good alternative to quasi direct back to back converter. This single stage converter is called Matrix Converter. Matrix converter is an array of controlled semiconductor switches that connects three phase source to the three phase load. This converter provides bidirectional power flow, sinusoidal input and output waveforms and they have no dc link storage elements. Simulation model and results presented showing Venturini control method of matrix converter.
NON-ISOLATED SOFT SWITCHING DC-DC CONVERTER AND LOAD AT FULL RANGE OF ZVS IAEME Publication
A non isolated soft switching DC–DC converter and load at full range of zero-voltage
switching (ZVS) characteristic is proposed. The proposed converter consists of an auxiliary circuit,
an inductor, two switches, and 2 diodes to achieving high efficiency at full range of load. At low
and heavy loads, ZVS of switching device is achieved by energy storing component. The inductor
energy stored varies with load and hence results in minimizes conduction loss. This leads to
switching of device for full range of load. The proposed DC - DC converter achieves high
efficiency as switching loss is reduced due to soft switching and ZVS operation which severe to
reduce conduction loss. The efficiency is improved about 4% in boost mode (2.5% in buck mode) at
full range of load. To verify the performance of the proposed converter, experimental results
prototype are presented.
1 ijaems oct-2015-3-design and development of novel matrix converter performanceINFOGAIN PUBLICATION
Matrix converter is a direct AC-AC converter topology that directly converts energy from an AC source to an AC load without the need of a bulky and limited lifetime energy storage element. Due to the significant advantages offered by matrix converter, such as adjustable power factor, capability of regeneration and high quality sinusoidal input/output waveforms. Matrix converter has been one of the AC–AC topologies that hasreceived extensive research attention for being an alternative to replace traditional AC-DC-AC converters in the variable voltage and variable frequency AC drive applications. In the present paper an indirect space vector modulated matrix converter is proposed. The basic idea of an indirect modulation scheme is to separately apply SVM to the rectification and inversion stages, before combining their switching states to produce the final gating signals. The paper encompasses development of a laboratory prototype of 230V, 250VA three phase to three phase DSP controlled matrix converter fed induction motor drive. The observations and real time testings have been carried out to evaluate and improve the stability of system under various typical abnormal input voltage conditions
Power Quality Improvement Using Cascaded H-Bridge Multilevel Inverter Based D...IJERA Editor
Cascaded multilevel configuration of the inverter has the advantage of its simplicity and modularity over the
configurations of the diode-clamped and flying capacitor multilevel inverters. This paper presents a threephase,
five-level and seven level cascaded multilevel voltage source inverter based active filter for power line
conditioning to improve power quality in the distribution network. The DSTATCOM helps to improve the
power factor and eliminate the Total Harmonics Distortion (THD) drawn from a Non-Liner Diode Rectifier
Load (NLDRL). The compensation process is based on concept of p-q theory. A CHB Inverter is considered for
shunt compensation of a 11 kV distribution system. Finally a level shifted PWM (LSPWM) and phase shifted
PWM (PSPWM) techniques are adopted to investigate the performance of CHB Inverter. The results are
obtained through Matlab/Simulink software package.
SRF THEORY BASED STATCOM FOR COMPENSATION OF REACTIVE POWER AND HARMONICSIAEME Publication
The power electronic devices like converters and inverters inject harmonic currents into AC
system due to their non linear characteristics. These devices draw high amount of reactive power
from source. The commencement of Nonlinear Load into the ac power system will have the effect of
harmonics. The presence of harmonics in system it will effected with power quality problems. Due
to this high amount of power losses and disoperation of power electronics devices is caused, along
with this Harmonics have a number of undesirable effects like Voltage disturbances. These
harmonics are needed to mitigate for Power Quality Enhancement in distributed system. Here the
device called STATCOM is one of the FACTS Devices which can be used to mitigate the harmonics
and reactive power compensation. The voltage source converter is core of the STATCOM and the
hysteresis current control is indirect method of controlling of VSC. In this paper we implement with
SRF based STATCOM control. SRF theory is implemented for the generation of controlling
reference current signals for controller of STATCOM. The Matlab\Simulink based model is
developed and simulation results are showed for linear and nonlinear load conditions.
Pi controller based of multi level upqc using dq0 transformation to improve p...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
The paper describes the single stage AC-AC converter. This converter is a good alternative to quasi direct back to back converter. This single stage converter is called Matrix Converter. Matrix converter is an array of controlled semiconductor switches that connects three phase source to the three phase load. This converter provides bidirectional power flow, sinusoidal input and output waveforms and they have no dc link storage elements. Simulation model and results presented showing Venturini control method of matrix converter.
NON-ISOLATED SOFT SWITCHING DC-DC CONVERTER AND LOAD AT FULL RANGE OF ZVS IAEME Publication
A non isolated soft switching DC–DC converter and load at full range of zero-voltage
switching (ZVS) characteristic is proposed. The proposed converter consists of an auxiliary circuit,
an inductor, two switches, and 2 diodes to achieving high efficiency at full range of load. At low
and heavy loads, ZVS of switching device is achieved by energy storing component. The inductor
energy stored varies with load and hence results in minimizes conduction loss. This leads to
switching of device for full range of load. The proposed DC - DC converter achieves high
efficiency as switching loss is reduced due to soft switching and ZVS operation which severe to
reduce conduction loss. The efficiency is improved about 4% in boost mode (2.5% in buck mode) at
full range of load. To verify the performance of the proposed converter, experimental results
prototype are presented.
1 ijaems oct-2015-3-design and development of novel matrix converter performanceINFOGAIN PUBLICATION
Matrix converter is a direct AC-AC converter topology that directly converts energy from an AC source to an AC load without the need of a bulky and limited lifetime energy storage element. Due to the significant advantages offered by matrix converter, such as adjustable power factor, capability of regeneration and high quality sinusoidal input/output waveforms. Matrix converter has been one of the AC–AC topologies that hasreceived extensive research attention for being an alternative to replace traditional AC-DC-AC converters in the variable voltage and variable frequency AC drive applications. In the present paper an indirect space vector modulated matrix converter is proposed. The basic idea of an indirect modulation scheme is to separately apply SVM to the rectification and inversion stages, before combining their switching states to produce the final gating signals. The paper encompasses development of a laboratory prototype of 230V, 250VA three phase to three phase DSP controlled matrix converter fed induction motor drive. The observations and real time testings have been carried out to evaluate and improve the stability of system under various typical abnormal input voltage conditions
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Design and Simulation of Power Factor Correction Boost Converter using Hyster...ijtsrd
Nowadays various power converters like AC DC or DC DC are widely used due to their flexible output voltage and high efficiency. But these converters take the current in the form of pulses from the utility grid so that the high Total Harmonic Distortion THD and poor Power Factor PF are the major disadvantages of these converters. Hence there is a continuous need for PF improvement and reduction of line current harmonics. The most popular topology for Active Power Factor Correction APFC is a boost converter as it draws continuous input current. This input current can be manipulated by Hysteresis control technique. The boost converter can perform this type of active power factor correction in many discontinuous and continuous modes. The design and simulation of boost converter with power factor correction in continuous conduction mode is represented by using MATLAB SIMULINK software. Yu Yu Khin | Yan Aung Oo "Design and Simulation of Power Factor Correction Boost Converter using Hysteresis Control" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27905.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/27905/design-and-simulation-of-power-factor-correction-boost-converter-using-hysteresis-control/yu-yu-khin
This paper presents an analytical comparison between two-level inverter and three-level neutral point diode clamped inverters for electric vehicle traction purposes. The main objective of the research is to declare the main differences in the performance of the two inverter schemes in terms of the switching and conduction losses over an entire domain of the modulation index and the phase angle distribution, steady-state operation, transient operation at a wide range of speed variation, and the total harmonic distortion THD% of the line voltage output waveform. It also declares the analysis of the three-level neutral point diode clamped inverter (NPCI) obstacle and the unbalance of the DC-link capacitor voltages. The introduced scheme presents an Induction Motor (IM) drive for electric vehicle (EV) applications. Considering the dynamic operation of the EV, the speed of the three-phase induction motor is controlled using a scalar V/Hz control for the full range of the IM power factor (PF). A comprehensive MATLAB/Simulink model for the proposed scheme is established.
Power factor correction using bridgeless boost topologyDHEERAJ DHAKAR
Power quality is becoming a major concern for
many electrical users. The high power non linear loads
(such as adjustable speed drives, arc furnace, static power
converter etc) and low power loads (such as computer, fax
machine etc) produce voltage fluctuations, harmonic
currents and an inequality in network system which results
into low power factor operation of the power system. The
devices commonly used in industrial, commercial and
residential applications need to go through rectification for
their proper functioning and operation. Due to the
increasing demand of these devices, the line current
harmonics create a major problem by degrading the power
factor of the system thus affecting the performance of the
devices. Hence there is a need to reduce the input line
current harmonics so as to improve the power factor of the
system. This has led to designing of Power Factor
Correction circuits. Power Factor Correction (PFC)
involves two techniques, Active PFC and Passive PFC. An
active power factor circuit using Boost Converter is used for
improving the power factor. This thesis work analyzes the
procedural approach and benefits of applying Bridgeless
Boost Topology for improving the power factor over Boost
Converter Topology. A traditional design methodology
Boost Converter Topology is initially analyzed and
compared with the Bridgeless Boost topology and the
overall Power Factor (PF) can be improved to the
expectation. Method of re-shaping the input current
waveform to be similar pattern as the sinusoidal input
voltage is done by the Boost converter and the related
controls that act as a Power Factor Correction (PFC)
circuit. Higher efficiency can be achieved by using the
Bridgeless Boost Topology. In this paper simulation of Boost
Converter topology and Bridgeless PFC boost Converter is
presented. Performance comparisons between the
conventional PFC boost Converter and the Bridgeless PFC
Boost Converter is done.
This paper introduces the modelling of a novel three phase AC-AC converter with indirect use of a capacitor as DC voltage link. The proposed converter has high efficiency because it uses Space Vector PWM (SVPWM) technique at both rectificier and inverter stages to operate the pulse width modulation in IGBT switches. The novel converter is equipped with a power factor control to shape the rectifier input current waveform to be sinusoidal and to be in phase with the input voltage. To keep the DC voltage stable, the converter utilizes PI controllers. Simulations are conducted for output voltage from 120 to 300 Volts with output frequency ranging from 30 Hz to 60 Hz. The simulation results show that the converter is able to maintain stable the DC voltage and current. Furthermore, the model demonstrates the benefits of proposed converter in terms of acquiring high input power factor and sinusoidal current waveform at the output side of the inverter.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Nowadays power electronics circuits are embedded to most of electrical application areas. This approached offers a great control mechanism with simple and easy circuit configuration. Switched Reluctance Motor (SRM) is one of the most recent apparatus which draws a great number of researchers’ interests. Previously several attempts are made to use the power converters as driver for SRM such as Voltage Source Inverter (VSI) and bridge converters. This paper presents an analysis study of three level inverter to control the SRM. The inverter is controlled using space vector modulation SVM. The aim of this paper is to report the use the multilevel inverter to be fed into the SRM. The implementation of the multilevel inverter is abl to reduce the Total Harmonics Distortion (THD). Performance comparison are made between the multilevel and previous power electronics circuits that applied to the SRM. The simulation results have been conducted by MATLAB/SIMULINK software.
Analysis of dc capacitor voltage balance method for h bridge inverter based p...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Analysis and Simulation of Solar PV Connected with Grid Accomplished with Boo...YogeshIJTSRD
This paper deals with a solar PV array connected with grid system. This system consists of PV cells with 30 KW system, Boost converter, three phase inverter with suitable control system and three phase load. This paper gives analysis of each components of the system. The output voltage from the solar PV cells are variable according to radiation intensity and temperature so in order to connect with grid the output voltage should be fixed and converted to AC voltage and this job will be done by an inverter. A very effective control system has been developed for the inverter based on pulse width modulation. This paper presents an intensive performance and dynamic behavior of a grid related PV energy conversion system. The PV system is developed and simulated with the help of MATLAB Simulink software environment. Abhishek Verma | Dr. Anup Mishra | Brahma Nand Thakur "Analysis and Simulation of Solar PV Connected with Grid Accomplished with Boost Converter and PWM Based Inverter" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, URL: https://www.ijtsrd.com/papers/ijtsrd40056.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/40056/analysis-and-simulation-of-solar-pv-connected-with-grid-accomplished-with-boost-converter-and-pwm-based-inverter/abhishek-verma
Analysis of direct power control AC-DC converter under unbalance voltage supp...IJECEIAES
This paper presents an analysis of Direct Power Control (DPC) technique for the Three-Phase Pulse Width Modulation (PWM) AC-DC converter under unbalanced supply condition. Unbalance condition will cause the presence of unbalanced current and voltages thus produce the negative components on the grid voltage as well as severe performance degradation of a grid connected Voltage Source Inverter (VSI). The input structures for conventional DPC has been modified with a three simpler sequence networks instead of coupled by a detailed Three-Phase system method. The imbalance voltage can be resolved by separating from the individual elements of voltage and current into symmetrical components called Sequence Network. Consequently, the input power relatively improved during unbalanced condition almost 70% through the measurement of Total Harmonic Distortion (THD) from the conventional Direct Power Control (DPC) in individual elements which is higher compared to separate components. Hence, several analyses are performed in order to analyze the steady state and dynamic performance of the converter, particularly during the load and DC voltage output reference variations.
Mitigation of harmonics using thyristor based 12 pulse voltage source pwm rec...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Application of PWM Control Strategy on Z-Source Isolated Dual active bridge D...IJMER
This project presents a Z-source with bidirectional dc–dc converter. The switching count is
reduced by adding a passive element. Thus, we are improving the output voltage level. The voltage
regulation range of proposed converter is better than that of the traditional bidirectional dc–dc
converter. The fully bridge symmetrical circuit configuration, is neither a high-voltage side nor a lowvoltage
side in the circuit structure, and the sources connected to the dc side of each H-bridge circuit
with voltage sources and current sources. This method can reduce current stress and improves the
system efficiency.
In this paper we are presenting a dual active bridge (DAB) dc–dc converter is also known as
Bidirectional DC-DC converter. Both simulation results are shown by using MATLAB software.
This paper presents an analysis of virtual-flux direct power control (VFDPC) technique for the three-phase pulse width modulation (PWM) ac-dc converter. The proposed VFDPC is developed by assuming the grid voltage and converter line filters quantities are related to a virtual three-phase ac motor. The controller works with less number of sensors by eliminating the voltage sensors used for measuring the three-phase grid voltage. The grid virtual flux which is proportional to the grid voltage will be estimated from the information of converter switching states, line current, and dc-link output voltage. Several analyses are performed in order to study the steady state and dynamic performance of the converter, particularly during the load and DC voltage output reference variations. The proportional integral (PI) controller at the outer voltage control loop of VFDPC is tuned properly and the entire PWM ac-dc converter system is simulated using MATLAB/Simulink to ensure the dc output voltage follow the desired output voltage under steady state and dynamic conditions. Ac-dc converter utilizing the proposed VFDPC is able to generate three-phase input current waveforms that are almost sinusoidal with low harmonics contents which is less than 5% and near unity power factor (pf) operation.
Enhancement of upfc performance with matrix converter using advanced direct p...eSAT Journals
Abstract In this paper presents a direct power control (DPC) for three-phase matrix converters operating as unified power flow controllers (UPFCs). Matrix converters (MCs) allow the direct ac/ac power conversion without dc energy storage links; therefore, the MC-based UPFC (MC-UPFC) has reduced size and cost, reduced capacitor power losses, together with higher reliability. Theoretical principles of direct power control (DPC) based on sliding mode control methods are established for an MC-UPFC dynamic model including the input filter. As a result, line active and reactive power, together with ac supply reactive power, can be directly controlled by selecting an appropriate matrix converter switching state assuring good steady-state and dynamic responses. Experimental results of DPC controllers for MC-UPFC show decoupled active and reactive power control, zero steady-state tracking error, and fast response times. Compared to an MC-UPFC using active and reactive power linear controllers based on a modified Venturini high-frequency PWM modulator, the experimental results of the advanced DPC-MC guarantee faster responses without overshoot and no steady-state error, presenting no cross-coupling in dynamic and steady-state responses. Keywords: Ac/ac conversion advanced direct power controller, matrix converter, unified power flow controller.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Design and Simulation of Power Factor Correction Boost Converter using Hyster...ijtsrd
Nowadays various power converters like AC DC or DC DC are widely used due to their flexible output voltage and high efficiency. But these converters take the current in the form of pulses from the utility grid so that the high Total Harmonic Distortion THD and poor Power Factor PF are the major disadvantages of these converters. Hence there is a continuous need for PF improvement and reduction of line current harmonics. The most popular topology for Active Power Factor Correction APFC is a boost converter as it draws continuous input current. This input current can be manipulated by Hysteresis control technique. The boost converter can perform this type of active power factor correction in many discontinuous and continuous modes. The design and simulation of boost converter with power factor correction in continuous conduction mode is represented by using MATLAB SIMULINK software. Yu Yu Khin | Yan Aung Oo "Design and Simulation of Power Factor Correction Boost Converter using Hysteresis Control" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27905.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/27905/design-and-simulation-of-power-factor-correction-boost-converter-using-hysteresis-control/yu-yu-khin
This paper presents an analytical comparison between two-level inverter and three-level neutral point diode clamped inverters for electric vehicle traction purposes. The main objective of the research is to declare the main differences in the performance of the two inverter schemes in terms of the switching and conduction losses over an entire domain of the modulation index and the phase angle distribution, steady-state operation, transient operation at a wide range of speed variation, and the total harmonic distortion THD% of the line voltage output waveform. It also declares the analysis of the three-level neutral point diode clamped inverter (NPCI) obstacle and the unbalance of the DC-link capacitor voltages. The introduced scheme presents an Induction Motor (IM) drive for electric vehicle (EV) applications. Considering the dynamic operation of the EV, the speed of the three-phase induction motor is controlled using a scalar V/Hz control for the full range of the IM power factor (PF). A comprehensive MATLAB/Simulink model for the proposed scheme is established.
Power factor correction using bridgeless boost topologyDHEERAJ DHAKAR
Power quality is becoming a major concern for
many electrical users. The high power non linear loads
(such as adjustable speed drives, arc furnace, static power
converter etc) and low power loads (such as computer, fax
machine etc) produce voltage fluctuations, harmonic
currents and an inequality in network system which results
into low power factor operation of the power system. The
devices commonly used in industrial, commercial and
residential applications need to go through rectification for
their proper functioning and operation. Due to the
increasing demand of these devices, the line current
harmonics create a major problem by degrading the power
factor of the system thus affecting the performance of the
devices. Hence there is a need to reduce the input line
current harmonics so as to improve the power factor of the
system. This has led to designing of Power Factor
Correction circuits. Power Factor Correction (PFC)
involves two techniques, Active PFC and Passive PFC. An
active power factor circuit using Boost Converter is used for
improving the power factor. This thesis work analyzes the
procedural approach and benefits of applying Bridgeless
Boost Topology for improving the power factor over Boost
Converter Topology. A traditional design methodology
Boost Converter Topology is initially analyzed and
compared with the Bridgeless Boost topology and the
overall Power Factor (PF) can be improved to the
expectation. Method of re-shaping the input current
waveform to be similar pattern as the sinusoidal input
voltage is done by the Boost converter and the related
controls that act as a Power Factor Correction (PFC)
circuit. Higher efficiency can be achieved by using the
Bridgeless Boost Topology. In this paper simulation of Boost
Converter topology and Bridgeless PFC boost Converter is
presented. Performance comparisons between the
conventional PFC boost Converter and the Bridgeless PFC
Boost Converter is done.
This paper introduces the modelling of a novel three phase AC-AC converter with indirect use of a capacitor as DC voltage link. The proposed converter has high efficiency because it uses Space Vector PWM (SVPWM) technique at both rectificier and inverter stages to operate the pulse width modulation in IGBT switches. The novel converter is equipped with a power factor control to shape the rectifier input current waveform to be sinusoidal and to be in phase with the input voltage. To keep the DC voltage stable, the converter utilizes PI controllers. Simulations are conducted for output voltage from 120 to 300 Volts with output frequency ranging from 30 Hz to 60 Hz. The simulation results show that the converter is able to maintain stable the DC voltage and current. Furthermore, the model demonstrates the benefits of proposed converter in terms of acquiring high input power factor and sinusoidal current waveform at the output side of the inverter.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Nowadays power electronics circuits are embedded to most of electrical application areas. This approached offers a great control mechanism with simple and easy circuit configuration. Switched Reluctance Motor (SRM) is one of the most recent apparatus which draws a great number of researchers’ interests. Previously several attempts are made to use the power converters as driver for SRM such as Voltage Source Inverter (VSI) and bridge converters. This paper presents an analysis study of three level inverter to control the SRM. The inverter is controlled using space vector modulation SVM. The aim of this paper is to report the use the multilevel inverter to be fed into the SRM. The implementation of the multilevel inverter is abl to reduce the Total Harmonics Distortion (THD). Performance comparison are made between the multilevel and previous power electronics circuits that applied to the SRM. The simulation results have been conducted by MATLAB/SIMULINK software.
Analysis of dc capacitor voltage balance method for h bridge inverter based p...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Analysis and Simulation of Solar PV Connected with Grid Accomplished with Boo...YogeshIJTSRD
This paper deals with a solar PV array connected with grid system. This system consists of PV cells with 30 KW system, Boost converter, three phase inverter with suitable control system and three phase load. This paper gives analysis of each components of the system. The output voltage from the solar PV cells are variable according to radiation intensity and temperature so in order to connect with grid the output voltage should be fixed and converted to AC voltage and this job will be done by an inverter. A very effective control system has been developed for the inverter based on pulse width modulation. This paper presents an intensive performance and dynamic behavior of a grid related PV energy conversion system. The PV system is developed and simulated with the help of MATLAB Simulink software environment. Abhishek Verma | Dr. Anup Mishra | Brahma Nand Thakur "Analysis and Simulation of Solar PV Connected with Grid Accomplished with Boost Converter and PWM Based Inverter" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, URL: https://www.ijtsrd.com/papers/ijtsrd40056.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/40056/analysis-and-simulation-of-solar-pv-connected-with-grid-accomplished-with-boost-converter-and-pwm-based-inverter/abhishek-verma
Analysis of direct power control AC-DC converter under unbalance voltage supp...IJECEIAES
This paper presents an analysis of Direct Power Control (DPC) technique for the Three-Phase Pulse Width Modulation (PWM) AC-DC converter under unbalanced supply condition. Unbalance condition will cause the presence of unbalanced current and voltages thus produce the negative components on the grid voltage as well as severe performance degradation of a grid connected Voltage Source Inverter (VSI). The input structures for conventional DPC has been modified with a three simpler sequence networks instead of coupled by a detailed Three-Phase system method. The imbalance voltage can be resolved by separating from the individual elements of voltage and current into symmetrical components called Sequence Network. Consequently, the input power relatively improved during unbalanced condition almost 70% through the measurement of Total Harmonic Distortion (THD) from the conventional Direct Power Control (DPC) in individual elements which is higher compared to separate components. Hence, several analyses are performed in order to analyze the steady state and dynamic performance of the converter, particularly during the load and DC voltage output reference variations.
Mitigation of harmonics using thyristor based 12 pulse voltage source pwm rec...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Application of PWM Control Strategy on Z-Source Isolated Dual active bridge D...IJMER
This project presents a Z-source with bidirectional dc–dc converter. The switching count is
reduced by adding a passive element. Thus, we are improving the output voltage level. The voltage
regulation range of proposed converter is better than that of the traditional bidirectional dc–dc
converter. The fully bridge symmetrical circuit configuration, is neither a high-voltage side nor a lowvoltage
side in the circuit structure, and the sources connected to the dc side of each H-bridge circuit
with voltage sources and current sources. This method can reduce current stress and improves the
system efficiency.
In this paper we are presenting a dual active bridge (DAB) dc–dc converter is also known as
Bidirectional DC-DC converter. Both simulation results are shown by using MATLAB software.
This paper presents an analysis of virtual-flux direct power control (VFDPC) technique for the three-phase pulse width modulation (PWM) ac-dc converter. The proposed VFDPC is developed by assuming the grid voltage and converter line filters quantities are related to a virtual three-phase ac motor. The controller works with less number of sensors by eliminating the voltage sensors used for measuring the three-phase grid voltage. The grid virtual flux which is proportional to the grid voltage will be estimated from the information of converter switching states, line current, and dc-link output voltage. Several analyses are performed in order to study the steady state and dynamic performance of the converter, particularly during the load and DC voltage output reference variations. The proportional integral (PI) controller at the outer voltage control loop of VFDPC is tuned properly and the entire PWM ac-dc converter system is simulated using MATLAB/Simulink to ensure the dc output voltage follow the desired output voltage under steady state and dynamic conditions. Ac-dc converter utilizing the proposed VFDPC is able to generate three-phase input current waveforms that are almost sinusoidal with low harmonics contents which is less than 5% and near unity power factor (pf) operation.
Enhancement of upfc performance with matrix converter using advanced direct p...eSAT Journals
Abstract In this paper presents a direct power control (DPC) for three-phase matrix converters operating as unified power flow controllers (UPFCs). Matrix converters (MCs) allow the direct ac/ac power conversion without dc energy storage links; therefore, the MC-based UPFC (MC-UPFC) has reduced size and cost, reduced capacitor power losses, together with higher reliability. Theoretical principles of direct power control (DPC) based on sliding mode control methods are established for an MC-UPFC dynamic model including the input filter. As a result, line active and reactive power, together with ac supply reactive power, can be directly controlled by selecting an appropriate matrix converter switching state assuring good steady-state and dynamic responses. Experimental results of DPC controllers for MC-UPFC show decoupled active and reactive power control, zero steady-state tracking error, and fast response times. Compared to an MC-UPFC using active and reactive power linear controllers based on a modified Venturini high-frequency PWM modulator, the experimental results of the advanced DPC-MC guarantee faster responses without overshoot and no steady-state error, presenting no cross-coupling in dynamic and steady-state responses. Keywords: Ac/ac conversion advanced direct power controller, matrix converter, unified power flow controller.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Engineering Research and Development is an international premier peer reviewed open access engineering and technology journal promoting the discovery, innovation, advancement and dissemination of basic and transitional knowledge in engineering, technology and related disciplines.
We follow "Rigorous Publication" model - means that all articles appear on IJERD after full appraisal, effectiveness, legitimacy and reliability of research content. International Journal of Engineering Research and Development publishes papers online as well as provide hard copy of Journal to authors after publication of paper. It is intended to serve as a forum for researchers, practitioners and developers to exchange ideas and results for the advancement of Engineering & Technology.
International Journal of Engineering Research and Development is an international premier peer reviewed open access engineering and technology journal promoting the discovery, innovation, advancement and dissemination of basic and transitional knowledge in engineering, technology and related disciplines.
We follow "Rigorous Publication" model - means that all articles appear on IJERD after full appraisal, effectiveness, legitimacy and reliability of research content. International Journal of Engineering Research and Development publishes papers online as well as provide hard copy of Journal to authors after publication of paper. It is intended to serve as a forum for researchers, practitioners and developers to exchange ideas and results for the advancement of Engineering & Technology.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Renewable Energy Based on Current Fed Switched Inverter for Smart Grid Applic...MangaiK4
Abstract - Renewable energy is used in the current fed switched inverter for high power production. High voltage support, wide yield ranges of operation, shoot-through resistance are a portion of the desired properties of an inverter for a reliable, versatile and less ripple AC inversion. This paper proposes a single stage, high boost inverter with buck-boost capacity which has a few particular advantages over traditional voltage source inverters (VSI) like better EMI noise, wide input and output voltage range of operation, and so on. The proposed inverter is named as Current-Fed Switched Inverter (CFSI). A renewable energy based converter structure of CFSI has been created which supplies both AC and DC loads, at the same time, from a single DC supply which makes it reasonable for DC smart grid application. This paper proposes the operation and control of a CFSI based converter which directs the AC and DC conversion voltages at their reference. The advancement of the proposed converter from essential current fed DC/DC topology is explained. The closed loop controller is verified by using the MATLAB/ Simulink environment.
High gain dc-dc step up converters have been used in renewable energy systems, for example, photovoltaic grid connected system and fuel cell power plant to step up the low level dc voltage to a high level dc bus voltage. If the conventional boost converter is to meet this demand, it should be operated at an extreme duty cycle (duty cycle closes to unity), which will cause electromagnetic interference, reverse recovery problem and conduction loss at the power switches. This paper proposes a class of non-isolated dc-dc step up converters which provide very high voltage gain at a small duty cycle (duty cycle < 0.5). Firstly, the converter topologies are derived based on active switched inductor network and combination of active and passive switched inductor networks; secondly, the modes of operation of proposed active switched inductor converter and combined active and passive switched inductor converter are illustrated; thirdly, the performance of the proposed converters are analyzed mathematically in details and compared with conventional boost converter. Finally, the analysis is verified by simulation results.
Comparison of symmetrical and asymmetrical cascaded current source multilevel...eSAT Journals
Abstract This paper presents symmetrical and asymmetrical cascaded multilevel inverter approach for high power output applications. It is based on the cascade connection of the H-bridge inverter cells. Comparison of symmetrical and asymmetrical current source multi level inverter is shown using 2 H-bridge inverter cells with cascade connection. Now ever by the supplies which are in GP with different ratios like 2,3,etc. Structural and operational characteristics are discussed and their inherent advantages are shown. Simulation using Matlab Simulink is done to verify the performance. Simulation and results for this proposed scheme are presented in this paper. Index Terms: Asymmetrical cascaded multilevel inverter, Current source multi level inverter, MATLAB Simulink, Optimization angle control, Symmetrical multi level inverter, Total harmonic distortion (THD).
MLI Power Topologies and Voltage Eminence: An Exploratory Reviewijeei-iaes
Due to their performances and inherent edges, particularly in medium-voltage and dynamic applications, multilevel inverters have received associate degree increasing attention in universe industrial applications. This paper deals with a review of the most structure electrical converter topologies additionally their commonest derived and hybrid structures quoted in previous analysis works. It additionally encompasses associate degree investigation on voltage harmonic elimination and THD estimation. For that reason, the paper summarizes the foremost relevant modulation techniques used to date to boost the output voltage quality. Theoretical formulas elicited within the literature, for calculating the output voltage THD higher and lower bounds area unit reportable and verified by adequate simulations.
Reduction of circulating current is one of the major considerations in inverter fed electrical drives. Diode clamped MLI enables higher output current per phase, thereby rating of the drive gets increased effectively. Various methods of triggering in the inverter legs creates better voltage profile and leads to the enabling of circulating current in the drive system. The induced circulating current flows through the apparatus neutral (N) and supply ground (G) is caused by the existence of parasitic capacitance. This circulating current may cause potential danger especially when parasitic capacitance poses large. In the past, different modulation techniques and conversion topologies have been introduced to minimize the flow of circulating current. However, these techniques lead to complexity, high cost, low voltage profile and efficiency due to lower modulation parameters. This paper proposes PS, POD, PD carrier shifting PWM algorithms for diode clamped MLI to tumbling the circulating current within the each phase of inverter legs. The performances of proposed algorithm, in terms of circulating current, THD, losses and efficiencies are analyzed theoreticallyand are validated via simulation and experimental results.
Comparative performance of modular with cascaded H-bridge three level invertersIJECEIAES
The conventional two-level inverter becomes no longer has the ability to cope with the high-power requirement, so this paper discusses two very common topologies of multilevel inverter like modular multilevel converter (MMC) and cascaded H-bridge (CHB) multilevel inverter for induction motor drive applications. This work attempts to investigate the comparison between MMC and CHB. The comparison is done in aspects of the configuration, concept of operation, advantages and disadvantages, the comparison is also considering output voltage (line to line) waveform, total harmonic distortion (THD) of the output line voltage waveform and the current drawn by both inverters. The performance of the inverters under carrier-based pulse width modulation (PWM) technique and mainly in-phase disposition (IPD), level shifted pulse width modulation is viewed. The paper discusses the comparison between the two multilevel inverters (MLIs) with motor drive applications especially induction motor. The operation of the motor is studied under certain value of load torque. The simulation results for the induction motor with the two inverters (modular multilevel and Cascaded H-bride) for three numbers of levels using MATLAB/Simulink are provided). The obtained results are encouraging and promising especially in the improvement of the THD% results.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
Explore our most comprehensive guide on lookback analysis at SafePaaS, covering access governance and how it can transform modern ERP audits. Browse now!
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
Accpac to QuickBooks Conversion Navigating the Transition with Online Account...PaulBryant58
This article provides a comprehensive guide on how to
effectively manage the convert Accpac to QuickBooks , with a particular focus on utilizing online accounting services to streamline the process.
Skye Residences | Extended Stay Residences Near Toronto Airportmarketingjdass
Experience unparalleled EXTENDED STAY and comfort at Skye Residences located just minutes from Toronto Airport. Discover sophisticated accommodations tailored for discerning travelers.
Website Link :
https://skyeresidences.com/
https://skyeresidences.com/about-us/
https://skyeresidences.com/gallery/
https://skyeresidences.com/rooms/
https://skyeresidences.com/near-by-attractions/
https://skyeresidences.com/commute/
https://skyeresidences.com/contact/
https://skyeresidences.com/queen-suite-with-sofa-bed/
https://skyeresidences.com/queen-suite-with-sofa-bed-and-balcony/
https://skyeresidences.com/queen-suite-with-sofa-bed-accessible/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-king-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed-accessible/
#Skye Residences Etobicoke, #Skye Residences Near Toronto Airport, #Skye Residences Toronto, #Skye Hotel Toronto, #Skye Hotel Near Toronto Airport, #Hotel Near Toronto Airport, #Near Toronto Airport Accommodation, #Suites Near Toronto Airport, #Etobicoke Suites Near Airport, #Hotel Near Toronto Pearson International Airport, #Toronto Airport Suite Rentals, #Pearson Airport Hotel Suites
What are the main advantages of using HR recruiter services.pdfHumanResourceDimensi1
HR recruiter services offer top talents to companies according to their specific needs. They handle all recruitment tasks from job posting to onboarding and help companies concentrate on their business growth. With their expertise and years of experience, they streamline the hiring process and save time and resources for the company.
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.