Information about spherical tanks engineered and fabricated by CNI - CN Industrial Co., including general specifications, highlighted projects, QA/QC system, etc.
Information about LPG/Air mixing station engineered and fabricated by CNI - CN Industrial Co., including general specifications, highlighted projects, QA/QC system, etc.
Ab 083-const-data-report-piping-systemstuankulintau
This document is a pressure piping construction and test data report. It provides information about the constructed piping including the contractor, owner, design details, materials used, tests performed, and certificates of compliance. The report documents that the piping was constructed according to the applicable codes and regulations. Inspectors have verified that examinations, testing, and inspections were completed and the piping conforms to the engineering design and code requirements.
Shaik Amjad is a mechanical engineer seeking a quality control role. He has over 4 years of experience in roles inspecting welding, materials, coatings and more. He holds certification in welding inspection from TWI as well as Level II certification in various NDT methods from ASNT. His experience includes projects in pipeline and pressure vessel fabrication for clients in Saudi Arabia and India. He is knowledgeable in various codes including ASME, API, and Saudi specifications.
This document provides a summary of qualifications for a Quality Control Engineer position. It outlines the candidate's 11 years of experience in inspection, quality control, and non-destructive testing for various industrial projects. Responsibilities have included leading inspection personnel, developing quality plans, reviewing welding procedures, witnessing tests, and coordinating with clients. The candidate holds engineering and non-destructive testing certifications and has worked extensively on both onshore and offshore oil and gas projects. Contact information and the candidate's work history with two companies are also provided.
This document contains the resume of Asad Hussain Butt. It summarizes his contact information, personal details, career objective, educational qualifications, technical certifications, computer skills, familiarity with codes and standards, employment history, responsibilities in current and previous roles, and details of projects with various clients in Pakistan and the Middle East involving fabrication, inspection, and installation of pressure vessels, heat exchangers, piping systems, boilers, and related equipment.
Leyon is a steel manufacturer and trader located in Shanghai that provides various steel products like plates, pipes, piles, and tubing to customers in industries such as oil, gas, petrochemical, and renewable energy. They have a team of experts and standards compliant products to deliver high quality steel materials on time. Leyon aims to be a reliable supplier through process control, raw material procurement, and delivery planning.
1. This document outlines the quality plan for manufacturing a non-segregated phase busduct. It details the raw materials, bought out items, fabrication process, and final inspections that will be conducted.
2. Checks include visual inspections, measurements, electrical tests, and mechanical tests performed on the aluminum, busbars, insulators, paint, heaters, and other components. The fabricated enclosure and conductors will undergo dimensional checks, welding inspections, and electrical type tests.
3. The support structure will be hot dip galvanized and undergo thickness checks, hammer tests, stripping tests and Preece tests to evaluate the galvanizing quality and protection. Final inspection includes verifying dimensions and markings
The document provides an overview of an industrial project quality control training course, outlining topics that will be covered such as basic definitions, types of inspection, welding inspection techniques, piping system tests, and introduction to organizations and standards. The training course also covers topics like introduction to pipes, fittings, flanges and valves, introduction to equipment, and introduction to construction documents and drawings. Professional behavior expectations are also introduced in the training course.
Information about LPG/Air mixing station engineered and fabricated by CNI - CN Industrial Co., including general specifications, highlighted projects, QA/QC system, etc.
Ab 083-const-data-report-piping-systemstuankulintau
This document is a pressure piping construction and test data report. It provides information about the constructed piping including the contractor, owner, design details, materials used, tests performed, and certificates of compliance. The report documents that the piping was constructed according to the applicable codes and regulations. Inspectors have verified that examinations, testing, and inspections were completed and the piping conforms to the engineering design and code requirements.
Shaik Amjad is a mechanical engineer seeking a quality control role. He has over 4 years of experience in roles inspecting welding, materials, coatings and more. He holds certification in welding inspection from TWI as well as Level II certification in various NDT methods from ASNT. His experience includes projects in pipeline and pressure vessel fabrication for clients in Saudi Arabia and India. He is knowledgeable in various codes including ASME, API, and Saudi specifications.
This document provides a summary of qualifications for a Quality Control Engineer position. It outlines the candidate's 11 years of experience in inspection, quality control, and non-destructive testing for various industrial projects. Responsibilities have included leading inspection personnel, developing quality plans, reviewing welding procedures, witnessing tests, and coordinating with clients. The candidate holds engineering and non-destructive testing certifications and has worked extensively on both onshore and offshore oil and gas projects. Contact information and the candidate's work history with two companies are also provided.
This document contains the resume of Asad Hussain Butt. It summarizes his contact information, personal details, career objective, educational qualifications, technical certifications, computer skills, familiarity with codes and standards, employment history, responsibilities in current and previous roles, and details of projects with various clients in Pakistan and the Middle East involving fabrication, inspection, and installation of pressure vessels, heat exchangers, piping systems, boilers, and related equipment.
Leyon is a steel manufacturer and trader located in Shanghai that provides various steel products like plates, pipes, piles, and tubing to customers in industries such as oil, gas, petrochemical, and renewable energy. They have a team of experts and standards compliant products to deliver high quality steel materials on time. Leyon aims to be a reliable supplier through process control, raw material procurement, and delivery planning.
1. This document outlines the quality plan for manufacturing a non-segregated phase busduct. It details the raw materials, bought out items, fabrication process, and final inspections that will be conducted.
2. Checks include visual inspections, measurements, electrical tests, and mechanical tests performed on the aluminum, busbars, insulators, paint, heaters, and other components. The fabricated enclosure and conductors will undergo dimensional checks, welding inspections, and electrical type tests.
3. The support structure will be hot dip galvanized and undergo thickness checks, hammer tests, stripping tests and Preece tests to evaluate the galvanizing quality and protection. Final inspection includes verifying dimensions and markings
The document provides an overview of an industrial project quality control training course, outlining topics that will be covered such as basic definitions, types of inspection, welding inspection techniques, piping system tests, and introduction to organizations and standards. The training course also covers topics like introduction to pipes, fittings, flanges and valves, introduction to equipment, and introduction to construction documents and drawings. Professional behavior expectations are also introduced in the training course.
This document provides a curriculum vitae or resume for Aravinth.J, who has 5 years of experience as a QA/QC inspector specializing in welding and piping. He has worked on projects for Saudi Aramco, SABIC, and other companies. His responsibilities have included inspecting materials and welds, reviewing documentation, coordinating inspections and tests, and ensuring work meets quality standards and codes. He holds several certifications in welding inspection and auditing and aims to contribute his skills to a progressive organization.
- The document is a curriculum vitae for G. Saravanaperumal, who has 8 years of experience as a welding inspector and quality controller in various manufacturing industries.
- He has a diploma in mechanical engineering and additional certifications in welding inspection.
- His professional experience includes roles as a quality controller, assistant engineer, NDT technician, and trainee at several companies in India manufacturing equipment, structures, and precision components.
- He has also worked on numerous projects in Saudi Arabia for construction and fabrication of industrial equipment, vessels, and storage structures.
Muhammad Imran QAQC (Welding Inspector)CSWIPMuhammad Imran
Muhammad Imran is a certified welding inspector with over 13 years of experience in QA/QC for oil and gas projects. He is currently working as a senior welding inspector for Olayan Descon Industrial Company Co. Ltd. in Saudi Arabia. He has extensive experience inspecting welding activities, witnessing qualification tests, and ensuring compliance with standards like ASME B31.3. Imran aims to find and resolve non-conformities and ensure quality welding through inspection, auditing, and reporting. He is certified in CSWIP 3.1 and has qualifications in NDT methods and welding techniques.
Mr. Phairat Into is a 43-year-old welding inspector from Thailand with over 20 years of experience in welding inspection, NDT, and quality control. He holds numerous certifications and has worked on various industrial projects in Thailand and overseas, specializing in welding inspection of piping, pressure vessels, offshore structures, and steel fabrication. His responsibilities have included reviewing welding procedures, witnessing tests, performing inspections, interpreting NDT reports, and ensuring work is in compliance with standards and clients' specifications. He currently works as a QC welding inspector on offshore projects in Thailand.
The document is a curriculum vitae for Prasath.V.R that includes the following information in 3 sentences:
Prasath has over 10 years of experience as an inspection engineer, with certifications in welding inspection, pressure vessel inspection, NDT testing, and safety. He has worked on shutdown and turnaround projects in Singapore, Saudi Arabia, India, and Myanmar for companies in the oil, gas, and petrochemical industries. The CV lists his responsibilities as an inspection engineer, which include performing inspections, reviewing inspection reports, identifying defects, and ensuring repairs meet integrity standards.
Founded in 2007, BT Mold is a Chinese mould manufacturer located in Shenzhen, China. They specialize in plastic mould design and manufacturing. Their workshop is equipped with CNC machines, EDM machines, grinding machines, and other equipment for plastic mould production. They offer services including mould design, mould manufacturing, mould trials, quality control processes, and shipping of molds and samples. Their quality control procedures include multiple inspection steps of mould components and trial samples.
THIRTEEN (13.4) years of extensive experience as Mechanical ,Piping , Shutdown project, Material Inspection/Material Prevention in Laydown Area or site area/ Structural QA/QC Inspector & QC Supervisor in Mechanical field of construction in various projects like Oil & Gas Industries, Petro chemicals, Chemical Plants, high rise building and infrastructure sector.
I would like to enroll in your esteemed organization as a candidate for an opening in the field of QA/QC Manager . I expect to here from your end in near future.
Excellent planner and strategist with proven abilities in surveying the projects of all kinds of earth works, power plant, chemical plant, water treatment plant, oil & gas plant etc.
Strong analytical and Organizational abilities with skills to plan and implement novel ideas
Simon Lawrence has over 9 years of experience in quality control, quality assurance, welding inspection, and mechanical inspection roles for various oil, gas, and petrochemical projects in the Middle East and India. He is certified in various welding, NDT, and quality standards. His experience includes pipeline construction, plant construction, materials inspection, welding procedures, dimensional inspections, valve testing, and hydrotesting. He is currently working as a QA/QC inspector for ADMA/OPCO in Abu Dhabi on offshore projects.
G.UmaMaheswaran has over 18 years of experience as a welding inspector. He has inspected welds and performed failure analysis for various projects in India and other countries like Angola, Saudi Arabia, and Abu Dhabi. His responsibilities include reviewing drawings and standards, verifying material specifications, qualifying welders, and inspecting welding, fabrication, and installation work according to codes and specifications. He is experienced in visual inspection, dimensional checks, and coordinating non-destructive testing.
Rajan Chauhan has over 2 years of experience in quality assurance and quality control for organizations in Ahmedabad. He has skills in inspection, testing, documentation, and ensuring quality standards are met. His responsibilities include visual inspection, ultrasonic testing, hydrostatic testing, coating inspection, and preparing quality reports. He aims to enhance quality through implementing best practices and maintaining knowledge of technological changes.
K. Murugan is seeking a position as a QA/QC inspection engineer with over 3 years of experience in quality inspection. He has experience inspecting items like piping, pressure vessels, tanks, and cryogenic vessels to various standards. Some of his responsibilities include performing inspections, developing quality plans and procedures, ensuring inspections are performed properly, and reviewing non-destructive testing reports. He is certified in CSWIP, ASNT Level II NDT, and PCN MPI and holds a diploma in mechanical engineering.
This document contains a resume for Wael Mahmoud Abd El-hameed seeking a position utilizing his experience as a piping engineer, welding engineer, and authorized inspector. He has over 10 years of experience and holds certifications including API 570 Authorized Piping Inspector, API 510 Authorized Pressure Vessel Inspector, and ASNT NDT Level II. His career history includes positions as a QA/QC manager and welding engineer for various power plant projects in Egypt.
2016 Resume of Rajeev Kumar, Inspection Engineer (Surveyor-1)Rajeev Kumar
This resume provides a summary of Rajeev Kumar's qualifications and experience as an inspection engineer. It includes details of his 6 years of industrial experience, technical expertise in inspection and non-destructive testing, educational background of a B-Tech in Mechanical Engineering, and involvement in various projects for clients like ONGC, BPCL, and IOCL where he conducted inspections of pipes, vessels, and other equipment.
Best Tooling is a tool shop in Shenzhen China specializing in the manufacture and service of high-precision complex plastic injection moulds for automotive interior/exterior, electrical connectors, medical device, consumer appliances and other small and medium size products.
WE OFFER YOU HIGHT QULITY, COMPETITIVE PRICE AND GOOD SERVICE
QUALITY is the core of our work, only by providing our customer good mould we can gain the trust, therefore to develop a mutual beneficial long term relationship. Our modern factory is climate controlled and well equipped with state of the art precision machines, which you are always welcome for a visit.
COST EFFECTIVE, the point of global sourcing is to save money, and we have the advantage of lower material cost and labor cost.
GOOD SERVICE, customer satisfaction is our goal. We got a team of professional sales and engineers to follow up your project. The program will be fully documented in great detail and we provide you progress report on a weekly basis.
I hope this is of interest to you and look forward to hearing from you in the near future.
Mohammad Tanweer is applying for the position of E&I QA/QC Inspector/Supervisor. He has 14 years of experience in instrumentation for oil, gas, and petrochemical plants. His experience includes inspection, testing, commissioning, and maintenance. He is familiar with international engineering standards and protocols for instrumentation systems.
This document contains the resume of Billy A. Burk IV. It outlines his contact information, qualifications, specific inspection knowledge, certifications and skills, employment history and education. His qualifications include engineering practices, quality assurance programs, communication skills, administrative skills and knowledge of codes. His employment history details his roles in quality assurance and control management, inspection services and shaft engineering technician positions. He has certifications in welding inspection, non-destructive testing methods, safety and specialized inspection areas.
Mohammad Khurshid Arif Ansari has over 13 years of experience in quality assurance, quality control, inspection, and commissioning for oil, gas, petrochemical, and construction projects. He is currently working as a MEP QA/QC Engineer in Qatar for a security and HSE building project. His experience includes welding inspection, QA/QC planning and documentation, fabrication shop inspection, piping and pipeline inspection, NDT, and material inspection. He has worked on projects in Qatar, Oman, Saudi Arabia, and India for companies in the oil, gas, and construction industries.
Information about pressure fluid tanker engineered and fabricated by CNI - CN Industrial Co., including general specifications, highlighted projects, QA/QC system, etc.
This CV summarizes the qualifications and experience of P. Sathiyprabhu seeking an engineer level position in piping stress analysis. He has 3 years and 7 months of experience performing piping stress analysis using CAESAR II software for projects in various industries. He is proficient in ASME and ISO piping standards and has worked on projects for clients in oil and gas, power, and petrochemical industries. His experience includes analyzing piping systems, preparing reports, and reviewing drawings to qualify piping systems and recommend pipe supports. He holds a Bachelor's degree in Mechanical Engineering and is skilled in various piping design software and AutoCAD.
This document provides an overview and contents of an online course about ASME Section I and Section VIII fundamentals. It includes:
- An introduction to the ASME Boiler and Pressure Vessel Code which contains 12 sections covering various topics like power boilers, materials, pressure vessels, welding qualifications, and piping codes.
- Summaries of the scopes and requirements of key sections like Section I (power boilers), Section VIII (pressure vessels), and the B31 piping codes.
- Information on ASME certification and inspection procedures for pressure equipment.
- A note on converting between imperial and metric units in the ASME codes.
- An introduction to the fundamentals and design requirements
J-PECO is a third-party inspection company focusing on oil and gas products inspection including valves,fittings,steel pipes,pressure vessels,flow meters, metering skids, pumps and so on.The customers will get the finished reports with in 24 hours after the inspection.
http://www.qczoom.com/
This document provides a curriculum vitae or resume for Aravinth.J, who has 5 years of experience as a QA/QC inspector specializing in welding and piping. He has worked on projects for Saudi Aramco, SABIC, and other companies. His responsibilities have included inspecting materials and welds, reviewing documentation, coordinating inspections and tests, and ensuring work meets quality standards and codes. He holds several certifications in welding inspection and auditing and aims to contribute his skills to a progressive organization.
- The document is a curriculum vitae for G. Saravanaperumal, who has 8 years of experience as a welding inspector and quality controller in various manufacturing industries.
- He has a diploma in mechanical engineering and additional certifications in welding inspection.
- His professional experience includes roles as a quality controller, assistant engineer, NDT technician, and trainee at several companies in India manufacturing equipment, structures, and precision components.
- He has also worked on numerous projects in Saudi Arabia for construction and fabrication of industrial equipment, vessels, and storage structures.
Muhammad Imran QAQC (Welding Inspector)CSWIPMuhammad Imran
Muhammad Imran is a certified welding inspector with over 13 years of experience in QA/QC for oil and gas projects. He is currently working as a senior welding inspector for Olayan Descon Industrial Company Co. Ltd. in Saudi Arabia. He has extensive experience inspecting welding activities, witnessing qualification tests, and ensuring compliance with standards like ASME B31.3. Imran aims to find and resolve non-conformities and ensure quality welding through inspection, auditing, and reporting. He is certified in CSWIP 3.1 and has qualifications in NDT methods and welding techniques.
Mr. Phairat Into is a 43-year-old welding inspector from Thailand with over 20 years of experience in welding inspection, NDT, and quality control. He holds numerous certifications and has worked on various industrial projects in Thailand and overseas, specializing in welding inspection of piping, pressure vessels, offshore structures, and steel fabrication. His responsibilities have included reviewing welding procedures, witnessing tests, performing inspections, interpreting NDT reports, and ensuring work is in compliance with standards and clients' specifications. He currently works as a QC welding inspector on offshore projects in Thailand.
The document is a curriculum vitae for Prasath.V.R that includes the following information in 3 sentences:
Prasath has over 10 years of experience as an inspection engineer, with certifications in welding inspection, pressure vessel inspection, NDT testing, and safety. He has worked on shutdown and turnaround projects in Singapore, Saudi Arabia, India, and Myanmar for companies in the oil, gas, and petrochemical industries. The CV lists his responsibilities as an inspection engineer, which include performing inspections, reviewing inspection reports, identifying defects, and ensuring repairs meet integrity standards.
Founded in 2007, BT Mold is a Chinese mould manufacturer located in Shenzhen, China. They specialize in plastic mould design and manufacturing. Their workshop is equipped with CNC machines, EDM machines, grinding machines, and other equipment for plastic mould production. They offer services including mould design, mould manufacturing, mould trials, quality control processes, and shipping of molds and samples. Their quality control procedures include multiple inspection steps of mould components and trial samples.
THIRTEEN (13.4) years of extensive experience as Mechanical ,Piping , Shutdown project, Material Inspection/Material Prevention in Laydown Area or site area/ Structural QA/QC Inspector & QC Supervisor in Mechanical field of construction in various projects like Oil & Gas Industries, Petro chemicals, Chemical Plants, high rise building and infrastructure sector.
I would like to enroll in your esteemed organization as a candidate for an opening in the field of QA/QC Manager . I expect to here from your end in near future.
Excellent planner and strategist with proven abilities in surveying the projects of all kinds of earth works, power plant, chemical plant, water treatment plant, oil & gas plant etc.
Strong analytical and Organizational abilities with skills to plan and implement novel ideas
Simon Lawrence has over 9 years of experience in quality control, quality assurance, welding inspection, and mechanical inspection roles for various oil, gas, and petrochemical projects in the Middle East and India. He is certified in various welding, NDT, and quality standards. His experience includes pipeline construction, plant construction, materials inspection, welding procedures, dimensional inspections, valve testing, and hydrotesting. He is currently working as a QA/QC inspector for ADMA/OPCO in Abu Dhabi on offshore projects.
G.UmaMaheswaran has over 18 years of experience as a welding inspector. He has inspected welds and performed failure analysis for various projects in India and other countries like Angola, Saudi Arabia, and Abu Dhabi. His responsibilities include reviewing drawings and standards, verifying material specifications, qualifying welders, and inspecting welding, fabrication, and installation work according to codes and specifications. He is experienced in visual inspection, dimensional checks, and coordinating non-destructive testing.
Rajan Chauhan has over 2 years of experience in quality assurance and quality control for organizations in Ahmedabad. He has skills in inspection, testing, documentation, and ensuring quality standards are met. His responsibilities include visual inspection, ultrasonic testing, hydrostatic testing, coating inspection, and preparing quality reports. He aims to enhance quality through implementing best practices and maintaining knowledge of technological changes.
K. Murugan is seeking a position as a QA/QC inspection engineer with over 3 years of experience in quality inspection. He has experience inspecting items like piping, pressure vessels, tanks, and cryogenic vessels to various standards. Some of his responsibilities include performing inspections, developing quality plans and procedures, ensuring inspections are performed properly, and reviewing non-destructive testing reports. He is certified in CSWIP, ASNT Level II NDT, and PCN MPI and holds a diploma in mechanical engineering.
This document contains a resume for Wael Mahmoud Abd El-hameed seeking a position utilizing his experience as a piping engineer, welding engineer, and authorized inspector. He has over 10 years of experience and holds certifications including API 570 Authorized Piping Inspector, API 510 Authorized Pressure Vessel Inspector, and ASNT NDT Level II. His career history includes positions as a QA/QC manager and welding engineer for various power plant projects in Egypt.
2016 Resume of Rajeev Kumar, Inspection Engineer (Surveyor-1)Rajeev Kumar
This resume provides a summary of Rajeev Kumar's qualifications and experience as an inspection engineer. It includes details of his 6 years of industrial experience, technical expertise in inspection and non-destructive testing, educational background of a B-Tech in Mechanical Engineering, and involvement in various projects for clients like ONGC, BPCL, and IOCL where he conducted inspections of pipes, vessels, and other equipment.
Best Tooling is a tool shop in Shenzhen China specializing in the manufacture and service of high-precision complex plastic injection moulds for automotive interior/exterior, electrical connectors, medical device, consumer appliances and other small and medium size products.
WE OFFER YOU HIGHT QULITY, COMPETITIVE PRICE AND GOOD SERVICE
QUALITY is the core of our work, only by providing our customer good mould we can gain the trust, therefore to develop a mutual beneficial long term relationship. Our modern factory is climate controlled and well equipped with state of the art precision machines, which you are always welcome for a visit.
COST EFFECTIVE, the point of global sourcing is to save money, and we have the advantage of lower material cost and labor cost.
GOOD SERVICE, customer satisfaction is our goal. We got a team of professional sales and engineers to follow up your project. The program will be fully documented in great detail and we provide you progress report on a weekly basis.
I hope this is of interest to you and look forward to hearing from you in the near future.
Mohammad Tanweer is applying for the position of E&I QA/QC Inspector/Supervisor. He has 14 years of experience in instrumentation for oil, gas, and petrochemical plants. His experience includes inspection, testing, commissioning, and maintenance. He is familiar with international engineering standards and protocols for instrumentation systems.
This document contains the resume of Billy A. Burk IV. It outlines his contact information, qualifications, specific inspection knowledge, certifications and skills, employment history and education. His qualifications include engineering practices, quality assurance programs, communication skills, administrative skills and knowledge of codes. His employment history details his roles in quality assurance and control management, inspection services and shaft engineering technician positions. He has certifications in welding inspection, non-destructive testing methods, safety and specialized inspection areas.
Mohammad Khurshid Arif Ansari has over 13 years of experience in quality assurance, quality control, inspection, and commissioning for oil, gas, petrochemical, and construction projects. He is currently working as a MEP QA/QC Engineer in Qatar for a security and HSE building project. His experience includes welding inspection, QA/QC planning and documentation, fabrication shop inspection, piping and pipeline inspection, NDT, and material inspection. He has worked on projects in Qatar, Oman, Saudi Arabia, and India for companies in the oil, gas, and construction industries.
Information about pressure fluid tanker engineered and fabricated by CNI - CN Industrial Co., including general specifications, highlighted projects, QA/QC system, etc.
This CV summarizes the qualifications and experience of P. Sathiyprabhu seeking an engineer level position in piping stress analysis. He has 3 years and 7 months of experience performing piping stress analysis using CAESAR II software for projects in various industries. He is proficient in ASME and ISO piping standards and has worked on projects for clients in oil and gas, power, and petrochemical industries. His experience includes analyzing piping systems, preparing reports, and reviewing drawings to qualify piping systems and recommend pipe supports. He holds a Bachelor's degree in Mechanical Engineering and is skilled in various piping design software and AutoCAD.
This document provides an overview and contents of an online course about ASME Section I and Section VIII fundamentals. It includes:
- An introduction to the ASME Boiler and Pressure Vessel Code which contains 12 sections covering various topics like power boilers, materials, pressure vessels, welding qualifications, and piping codes.
- Summaries of the scopes and requirements of key sections like Section I (power boilers), Section VIII (pressure vessels), and the B31 piping codes.
- Information on ASME certification and inspection procedures for pressure equipment.
- A note on converting between imperial and metric units in the ASME codes.
- An introduction to the fundamentals and design requirements
J-PECO is a third-party inspection company focusing on oil and gas products inspection including valves,fittings,steel pipes,pressure vessels,flow meters, metering skids, pumps and so on.The customers will get the finished reports with in 24 hours after the inspection.
http://www.qczoom.com/
This document provides a summary of Siddharth Engineers, a company that manufactures valves and engineering components in Pune, India. It discusses the company's products such as ball valves, butterfly valves, and valve automation systems. It also mentions the company's manufacturing facilities that use CNC and VMC machines. Finally, it lists some of Siddharth Engineers' clients and certifications.
The document provides a summary of Amarkumar Pankajbhai Desai's professional experience and qualifications. It summarizes his 6 years of experience in quality assurance, inspection, and documentation for oil and gas manufacturing companies. It also lists his areas of expertise including ISO and quality system auditing, inspection, and machining. Finally, it details his work history and roles in quality assurance and inspection for several engineering companies in the oil and gas industry.
Hossein Pournaimi is seeking employment as a technical inspector. He has over 10 years of experience inspecting equipment like compressors, turbines, and vessels for quality standards. This includes experience visual inspecting, using measurement tools, reviewing documentation, and ensuring safety. He is proficient in English, holds NDT and welding certifications, and has a background in engineering.
The document provides a summary of N.M.VenugopalRao's career experience and qualifications. It details over 18 years of experience in inspection engineering roles for pipeline, piping, and pressure vessel projects. Recent roles have included serving as a senior inspection engineer for Applus Velosi in Abu Dhabi and mechanical inspection lead for Moody Intertek. VenugopalRao holds relevant certifications and training in international codes and standards, and languages include English, Hindi, and Telugu.
Mohamed elsayied daowod has over 9 years of experience as a senior QC inspector, welding inspector, and mechanical engineer. He has worked on various oil, gas, petrochemical, and industrial projects inspecting piping, tanks, heat exchangers, and pressure vessels. Currently he works as a QA/QC inspection engineer ensuring new chemical plant equipment meets codes and specifications.
L&T Valves - Role of NDT in Valve IndustriesBabu Kuriakose
The document discusses the role of non-destructive testing (NDT) in valve industries. It provides an overview of L&T Valves Limited, including its facilities, certifications, and customers. It then discusses LTVL's NDT journey, current NDT practices, challenges, and improvements made. Specific topics covered include personnel qualifications, NDT processes, validation, customer demands vs LTVL practices, case studies of NDT failures, and interpretations of ASME standards taken up by LTVL.
This document is a curriculum vitae for Saad Mohamed Gad Ibrahim Alawady that outlines his professional experience and qualifications. It summarizes that he has over 15 years of experience in non-destructive testing including visual, ultrasonic, penetrant, magnetic, radiographic, and hydrostatic testing according to various standards. His current role is as a Senior QA&QC Engineer for Apache - KHALDA Petroleum company, where he oversees inspection, testing, and quality control activities to ensure compliance with standards.
The document summarizes a vendor visit by an engineering company to BÖHMER GmbH in Germany to evaluate subsea valves. It includes sections on general information, applicable standards, document review, test criteria and descriptions of hydrostatic, function, pneumatic and drift tests performed on 6" and 2" ball valves. Test parameters and acceptance criteria are defined according to API 6DSS and the client's specification. The 27-page report provides technical details to verify the valves meet design and performance requirements for a subsea pipeline project in Nong Yao, China.
The document provides a summary of N.M.VenugopalRao's career experience as a QA/QC engineer and welding inspector over 17 years. It details his roles with various companies conducting inspections for oil and gas pipeline projects. His responsibilities included reviewing documents and inspection plans, managing inspection teams, verifying materials and welds met standards, and overseeing testing and commissioning activities. He has extensive experience inspecting pipelines, vessels, and structures according to international codes.
The document outlines an OJT program for a mechanical quality control inspector. It is divided into 11 modules across 7 parts related to quality control, mechanical piping and pipeline construction, equipment, non-destructive testing, painting and insulation, and commissioning. Module 1 covers drawing and document control, including standards for quality assurance plans and specifications. Module 2 addresses carbon steel pipeline construction, welding processes, and hydrostatic testing. Module 3 covers glass-reinforced epoxy pipeline construction including material handling, joint types, and field threading.
This document describes a challenge to design and build a manufacturing plant to produce a three-pipe nested copper product. The inner pipe is 22mm copper, the middle pipe tightly fits around it, and the outer pipe has ribbing and fits around the middle pipe. The plant must be able to produce 20-500 meters per day. Respondents should submit designs meeting specifications, with the possibility of a turnkey plant, royalty share, or fee. Shortlisted respondents will provide a prototype by November and the selected design should be commissioned by March 2015. Submissions will be evaluated on criteria like simplicity and scalability.
This document provides contact and location information for the global offices and representatives of Elite Piping Manufacture Co., Ltd. It has offices and contacts in China, Pakistan, Dubai, Singapore, and a pipe stockiest in Tianjin, China. The company manufactures flanges and fittings and stocks a variety of carbon and alloy steel pipes for customers in over 25 countries.
This document provides contact and location information for the global offices and representatives of Elite Piping Manufacture Co., Ltd. It has offices and contacts in China, Pakistan, Dubai, and Singapore. It also summarizes that Elite Piping is a manufacturer of flanges and fittings and has established a pipe stockyard in Tianjin, China near the port to fulfill urgent delivery demands. The stockyard contains a variety of carbon, alloy, and oil/gas pipes and tubes.
The document provides information about the fabrication of a storage buffer vessel at Bharat Heavy Plate and Vessels Limited (BHPV). It discusses the goals of learning fabrication processes and quality inspection methods. It then provides details about the production sectors, introduction to pressure vessels, design considerations, ordering fabrication, non-destructive testing methods, and bill of materials. The key points are that the document outlines the goals, production process, design, fabrication steps, quality testing methods, and materials listing for a storage buffer vessel being manufactured at BHPV.
How to find industrial grade pressure vesselsserena1black
This document discusses how to find quality industrial grade pressure vessels. It outlines that pressure vessels must meet stringent ASME BPVC quality standards, use high grade materials specified in the Code, and undergo precise welding and testing/inspection processes. The key is looking for a pressure vessel manufacturer that adheres to all ASME BPVC regulations and can provide certification that the vessel has met all necessary requirements for safe industrial use.
Similar to CNI Spherical Tank (Pressure Vessel) (20)
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
The CBC machine is a common diagnostic tool used by doctors to measure a patient's red blood cell count, white blood cell count and platelet count. The machine uses a small sample of the patient's blood, which is then placed into special tubes and analyzed. The results of the analysis are then displayed on a screen for the doctor to review. The CBC machine is an important tool for diagnosing various conditions, such as anemia, infection and leukemia. It can also help to monitor a patient's response to treatment.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
1. C N I - C N I N D U S T R I A L C O .
PRESSURE VESSEL
General Specifications
Highlighted Projects
Quality Control and Assurance
ASME Certificates
Third-Party Approval
Appendix 1: Construction On Site
Appendix 2: Guidelines To Access
Other Information
2. GENERAL SPECIFICATIONS
C N I - C N I N D U S T R I A L C O . I N F O @ C N I P V C . C O M
ASME Section VIII, Division 1 & 2
D E S I G N C O D E
As per the client's requirements
Experience: 5000m3
C A P A C I T Y
As per the client's requirements
Experience: up to 38barG
D E S I G N P R E S S U R E
As per the client's requirements
Experience: up to -40 - 70 Celsius degree
D E S I G N T E M P E R A T U R E
CNI is the only company in Vietnam to be able to design and fabricate spherical tanks. The
company's current market share in pressure vessel field is more than 50%.
C A P A B I L I T I E S
4. Client: PetroVietnam Technical Services Corp.
Design Code: ASME Section VIII Div. 2
Pressure: 18 barG
Temperature: -40 – 70 Celsius degree
0 2 x 4 5 0 0 m 3 S P H E R I C A L T A N K S A T
T H E C A M A U G A S P R O C E S S P L A N T
Client: PetroVietnam Gas
Design Code: ASME Section VIII Div. 2
0 2 x 3 5 0 0 m 3 S P H E R I C A L T A N K S A T
D I N H V U T E R M I N A L
Client: PetroVietnam Gas North
Design Code: ASME Section VIII Div. 2
0 1 x 1 5 0 0 M t S P H E R I C A L T A N K A T T H E
D A N A N G P E T R O L E U M D E P O T
5. Client: Formosa Ha Tinh
Design Code: ASME Section VIII Div. 2
Note: also including an LPG/ Air mixing station,
02 steam vaporizers
0 1 x 2 0 0 m 3 S P H E R I C A L T A N K A T
F O R M O S A H A T I N H
Client: Duc Giang Chemnical
Design Code: ASME Section VIII Div. 2
0 1 x 1 0 0 0 m 3 S P H E R I C A L T A N K A T
T H E N H 3 S T A T I O N I N L A O C A I
Client: Messer
Design Code: ASME Section VIII Div. 2
Pressure: 32 barG
Temperature: -10 – 60 Celsius degree
0 2 x 6 5 0 m 3 + 0 2 x 4 0 0 m 3 S P H E R I C A L
T A N K S A T H A I D U O N G B R A N C H
7. I N F O @ C N I P V C . C O M
ASME CERTIFICATES
8. I N F O @ C N I P V C . C O M
THIRD-PARTY APPROVAL
We work under international reputable third parties
who review and supervise the production from checking inlet materials to final completion
due to Traveller, ITP and QC forms with total conformity to the ASME code.
11. Appendix 2
Guidelines To Access
Other Information
C N I - C N I N D U S T R I A L C O . I N F O @ C N I P V C . C O M
F A C I L I T I E S & E Q U I P M E N T
CNI's equipment includes 3600Mt and 1500Mt hydraulic pressing
machine, 4-roll bending machine (w/t 3000/85mm), flanging machine,
plasma cutting machine,...
Q A / Q C S Y S T E M
The ASME-approved QC manual governs all CNI's production
activities, regardless of items are coded or code intent.
Brochure (p.8) WebsiteRead more:
Brochure (p.12) WebsiteRead more:
C L I E N T S
CNI has served international highly-esteemed clients
including clients from the U.S., Australia, Japan, Korea,...
Brochure (p.11) WebsiteRead more: