Ch 6 egg. gra - conic sections
•Download as PPTX, PDF•
1 like•448 views
The document discusses conic sections including ellipses, parabolas, and hyperbolas. It provides figures and articles on the introduction of conic sections, the different types of conic sections, terminology used in conics, properties of conics, ellipses as central conics, construction of ellipses and parabolas using different methods, terminology for hyperbolas, and rectangular or equilateral hyperbolas. The document contains references to slides that provide further details on various aspects of conic sections.
Report
Share
Report
Share
Recommended
Moonbuggy Project
The document discusses the Ryerson Moonbuggy Project which involved designing and fabricating a moonbuggy. It outlines the concept designs and final products for the moonbuggy's frame, gearbox housing, and overall design.
Conic sections
This document discusses conic sections, including circles, ellipses, parabolas, and hyperbolas. It provides:
1) The definitions and standard equations of each conic section, describing how they are formed from the intersection of a plane with a double cone.
2) Examples of different forms the equations can take and the geometric properties of each conic section, such as foci, axes, vertices, and asymptotes.
3) Methods for writing the equations of tangents to conics and using parametric equations to represent loci.
In less than 3 sentences, it summarizes the key information about conic sections provided in the document.
Ben c conic sections
There are four types of conic sections: parabolas, circles, hyperbolas, and ellipses. Conic sections are formed by the intersection of a plane and a cone. The parabola has a U-shaped graph and its equation is Y=X^2. Circles are defined by the equation (x-a)^2 + (y-b)^2 = r^2, where a and b are the x and y coordinates of the center and r is the radius. Hyperbolas have the form a^2/x^2 - b^2/y^2 = 1. Ellipses use the same parameters a and b as circles and hyperbolas in their equation.
Probability
The document discusses probability and introduces several online activities and games for students to learn about probability. Students are instructed to visit specific pages on BrainPop, Maths Online, Interactivate: Activities, Skillswise: Numbers, Johnnie's Math Page, and take an online quiz. After completing the activities, students are asked to write a paragraph about what they learned about probability and come up with their own probability experiment.
Cells and the cell theory
The document summarizes key aspects of cell theory and cell structure. It discusses scientists like Hooke, Leeuwenhoek, Schwann, and Virchow who contributed to early observations of cells. The cell theory states that all living things are made of cells, the cell is the basic unit of structure and function, and cells only arise from pre-existing cells. The document compares prokaryotic and eukaryotic cells, describing their components like DNA, organelles, and membranes. Key organelles in plant and animal cells are also outlined.
Unit 8.1
This document discusses conic sections and parabolas. It begins by listing topics that will be covered, including the geometry of parabolas and translations and reflections of parabolas. It then provides information about conic sections being the paths of objects in gravitational fields. Several slides define and show graphs of parabolas, their standard equations, and how changing parameters affects the graph. Examples are given of writing equations of parabolas given properties like the focus and directrix. A quick review section ends with practice problems finding distances and rewriting equations in standard form.
8.1
This document discusses conic sections and parabolas. Parabolas have a U-shape and are symmetric about their axis of symmetry. The standard form of a parabola's equation specifies that the vertex is located at (h,k) and the focus is p units away from the vertex along the axis. Examples are given of finding the standard form for parabolas with given vertices and foci.
10.6 graphing and classifying conics
This document provides information on translating and graphing different types of conic sections including parabolas, circles, ellipses, and hyperbolas. It discusses writing equations in standard form using properties like the vertex, center, foci, and distance from the focus to the vertex. The document also describes how to classify conic sections based on the discriminant of the equation and provides examples of classifying and graphing various conic sections.
Recommended
Moonbuggy Project
The document discusses the Ryerson Moonbuggy Project which involved designing and fabricating a moonbuggy. It outlines the concept designs and final products for the moonbuggy's frame, gearbox housing, and overall design.
Conic sections
This document discusses conic sections, including circles, ellipses, parabolas, and hyperbolas. It provides:
1) The definitions and standard equations of each conic section, describing how they are formed from the intersection of a plane with a double cone.
2) Examples of different forms the equations can take and the geometric properties of each conic section, such as foci, axes, vertices, and asymptotes.
3) Methods for writing the equations of tangents to conics and using parametric equations to represent loci.
In less than 3 sentences, it summarizes the key information about conic sections provided in the document.
Ben c conic sections
There are four types of conic sections: parabolas, circles, hyperbolas, and ellipses. Conic sections are formed by the intersection of a plane and a cone. The parabola has a U-shaped graph and its equation is Y=X^2. Circles are defined by the equation (x-a)^2 + (y-b)^2 = r^2, where a and b are the x and y coordinates of the center and r is the radius. Hyperbolas have the form a^2/x^2 - b^2/y^2 = 1. Ellipses use the same parameters a and b as circles and hyperbolas in their equation.
Probability
The document discusses probability and introduces several online activities and games for students to learn about probability. Students are instructed to visit specific pages on BrainPop, Maths Online, Interactivate: Activities, Skillswise: Numbers, Johnnie's Math Page, and take an online quiz. After completing the activities, students are asked to write a paragraph about what they learned about probability and come up with their own probability experiment.
Cells and the cell theory
The document summarizes key aspects of cell theory and cell structure. It discusses scientists like Hooke, Leeuwenhoek, Schwann, and Virchow who contributed to early observations of cells. The cell theory states that all living things are made of cells, the cell is the basic unit of structure and function, and cells only arise from pre-existing cells. The document compares prokaryotic and eukaryotic cells, describing their components like DNA, organelles, and membranes. Key organelles in plant and animal cells are also outlined.
Unit 8.1
This document discusses conic sections and parabolas. It begins by listing topics that will be covered, including the geometry of parabolas and translations and reflections of parabolas. It then provides information about conic sections being the paths of objects in gravitational fields. Several slides define and show graphs of parabolas, their standard equations, and how changing parameters affects the graph. Examples are given of writing equations of parabolas given properties like the focus and directrix. A quick review section ends with practice problems finding distances and rewriting equations in standard form.
8.1
This document discusses conic sections and parabolas. Parabolas have a U-shape and are symmetric about their axis of symmetry. The standard form of a parabola's equation specifies that the vertex is located at (h,k) and the focus is p units away from the vertex along the axis. Examples are given of finding the standard form for parabolas with given vertices and foci.
10.6 graphing and classifying conics
This document provides information on translating and graphing different types of conic sections including parabolas, circles, ellipses, and hyperbolas. It discusses writing equations in standard form using properties like the vertex, center, foci, and distance from the focus to the vertex. The document also describes how to classify conic sections based on the discriminant of the equation and provides examples of classifying and graphing various conic sections.
Unit 3 Cell Theory And Organelles
The document discusses the cell theory and structure and function of cells. It notes that the cell theory developed from early microscopy studies and contributions from many scientists. The cell theory has three main principles: all organisms are made of cells, all cells come from preexisting cells, and the cell is the basic unit of life. The document also describes key components of cell structure including the nucleus, organelles, cytoskeleton, and cell membrane. It explains functions of organelles such as the endoplasmic reticulum, mitochondria, and lysosomes.
Mehul mathematics conics
This document discusses various conic sections including parabolas, hyperbolas, circles and ellipses. These curves are formed by the intersection of a plane with a double napped right circular cone. The type of conic section depends on the angle between the plane and the cone. Parabolas have a focus and directrix. Ellipses have two fixed foci and the sum of the distances from any point on the ellipse to the two foci is a constant. Hyperbolas also have two foci but the difference of the distances from any point to the two foci is a constant. Key properties of each type of conic section such as axes, foci, eccentricity and latus rectum are
1515 conics
Mathematics (from Greek μάθημα máthēma, “knowledge, study, learning”) is the study of topics such as quantity (numbers), structure, space, and change. There is a range of views among mathematicians and philosophers as to the exact scope and definition of mathematics
Conics
The document discusses hyperbolas, which are conic sections that have two disconnected branches. Key elements of a hyperbola include its foci, vertices, transverse/conjugate axes, center, and asymptotes. The eccentricity measures the "bendiness" of the hyperbola. Equations of hyperbolas depend on whether the transverse axis is horizontal or vertical. The document provides examples and exercises on finding equations and properties of hyperbolas given certain information.
problems on conics
This document contains 5 problems identifying different conic sections from their equations. Problem 1 identifies -3x^2 + y + 2 = 0 as a parabola. Problem 2 identifies 2x^2 +3xy - 4y^2 + 2x - 3y + 1 = 0 as a hyperbola. Problem 3 identifies 2x^2 -3y^2 = 0 as a hyperbola. Problem 4 identifies -3x^2 + xy - 2y^2 + 4 = 0 as either an ellipse or circle. Problem 5 identifies x = 0 as a degenerate conic that is a line.
Applications of conic and vectors
This document discusses applications of vectors and conics in multivariable calculus. It provides definitions of conic sections including parabolas, circles, ellipses, and hyperbolas. Applications of conics discussed include using the elliptical path of reflection in lithotripsy to break up kidney stones, the design of whispering galleries, and elliptical billiard tables. Additional applications mentioned are the elliptical orbit of planets and the use of parabolic mirrors. Examples of vector applications given are determining landing points while crossing a river, accounting for wind in airplane flight, and the orbital radius vector of planets around the sun.
Conic Sections
Conics are plane curves formed by cutting a double right circular cone with a plane. The type of conic section depends on the angle of the cutting plane to the cone's axis: a circle for perpendicular, ellipse for non-perpendicular, parabola for parallel to the edge, and hyperbola for intersecting both cones. A parabola is the set of points equidistant from a focus point and directrix line, with the vertex halfway between them. The latus rectum connects the endpoints equidistant from the focus, determining how wide the parabola opens. The four types of parabolas depend on the axis and opening direction.
Technology Infused Lesson Plan
This lesson plan introduces students to conic sections through interactive activities using Geometer's Sketchpad, Conic Flyer, TI-84 calculators, and comic creation software. Over two days, students will manipulate virtual conics to discover properties like center and intercepts. They will reinforce this by using TI applications and create comics demonstrating their understanding. The plan aims to differentiate instruction through collaborative, technology-enhanced activities addressing higher-order thinking according to state standards.
Circles
Conic sections are shapes formed by the intersection of a plane and a double cone. A hyperbola occurs if the plane cuts through both cones. A parabola occurs if the plane is parallel to the edge of the cone. An ellipse occurs if the plane is not parallel or cutting through both cones. A circle is a special case of an ellipse where the plane is perpendicular to the altitude of the cone.
1001 ch 10 day 1
The document summarizes key aspects of parabolas as conic sections:
1) A parabola is defined as the set of points in a plane that are equidistant from a fixed point (the focus) and a fixed line (the directrix).
2) The standard form of the equation of a parabola is y=ax^2, where the vertex is at the origin, the focus is on the y-axis, and the directrix is the x-axis.
3) Examples are worked through to find the equation, focus, directrix, and other properties of parabolas given information like the vertex or standard form equation.
1576 parabola
Mathematics (from Greek μάθημα máthēma, “knowledge, study, learning”) is the study of topics such as quantity (numbers), structure, space, and change. There is a range of views among mathematicians and philosophers as to the exact scope and definition of mathematics
Engg. curves
The document discusses various types of engineering curves including conics, cycloids, involutes, spirals, and helices. It provides definitions and construction methods for different conic sections obtained from intersecting a right circular cone with cutting planes in different positions relative to the axis. Specifically, it describes how triangles, circles, ellipses, parabolas, and hyperbolas can be obtained and provides step-by-step methods for constructing ellipses using concentric circles, rectangles, oblongs, arcs of circles, and rhombuses. It also demonstrates how to construct parabolas and use directrix-focus definitions to draw ellipses, parabolas, and other curves.
Sec9.1 conics
This document discusses parabolas and provides examples of writing equations of and graphing parabolas given characteristics like the vertex, focus, and directrix. It defines a parabola as the set of all points equidistant from a fixed point (the focus) and a fixed line (the directrix). Examples show how to find the equation of a parabola with a given vertex and focus, graph parabolas, and solve applied problems involving the reflective properties of parabolas.
Curve generation %a1 v involute and evolute
The document discusses evolutes and involutes of curves. It defines an evolute as the locus of the centers of curvature of a curve, and an involute as a curve that is traced by a point on a taut string unwinding from the evolute. Specifically:
- The evolute of a curve is the envelope of its normals, and the original curve is the involute of its evolute.
- Examples of evolutes include the semi-cubic parabola as the evolute of a parabola, and an equal spiral as the evolute of an equiangular spiral.
- Involutes can be used to generate gear teeth profiles, with the teeth profiles drawn as invol
Conicsections dpsvk
The document discusses the history and properties of conic sections - circles, ellipses, parabolas, and hyperbolas. It describes how each curve is formed by slicing a cone at different angles and discusses key properties like equations and relationships to foci. Examples of how each conic section appears in nature and technology are also provided.
Conics Scribe Post
Mr. K taught the class about conic sections by making cuts on a cone with his meter stick. He showed that a horizontal cut forms a circle, an angled cut forms an ellipse, and steeper cuts form a parabola and hyperbola. Later, students constructed parabolas by folding strips of paper and drawing along the creases. This demonstrated properties of the parabola involving points on the curve and its directrix.
Engineering Curves
The document discusses different types of engineering curves known as conics that are formed by the intersection of a cutting plane with a cone. These conics include ellipses, parabolas, hyperbolas, circles, and triangles. The document provides definitions, examples of uses, and methods for drawing each type of conic section. It specifically describes how to construct ellipses, parabolas, and hyperbolas using different geometric techniques such as the arc of a circle, concentric circles, directrix-focus, and rectangular methods.
Cell Theory Discussion
The document summarizes key concepts about cells including their discovery, organization of life, and cell theory. It describes how Robert Hooke first observed cells using a microscope in 1665 and how Anton van Leeuwenhoek later observed bacteria and other microorganisms. It also outlines how Matthias Schleiden and Theodor Schwann developed the cell theory, concluding that all organisms are composed of cells, cells are the basic unit of life, and all cells come from preexisting cells. The document also distinguishes between prokaryotic and eukaryotic cells.
Portion Distortion
This document provides information about portion distortion over the past 20 years and how larger portions can lead to excess calorie intake. It shows examples of how portions have increased for various foods like bagels, spaghetti, hamburgers, sodas, and cookies. For each food item, it estimates the additional calories consumed and the amount of physical activity needed to burn off those extra calories. The document also introduces MyPlate guidelines as a tool for healthy portion sizes.
Chapter 7.2 parabola
The document discusses parabolas, including their key properties and equations. It defines a parabola as the set of points equidistant from a fixed point (the focus) and a fixed line (the directrix). The document derives the standard equation of a parabola from this definition and discusses how to graph parabolas based on their equations. It also covers transformations, latus rectum, and other geometric properties of parabolas.
Ch 13 egg. gra - projection of p solids
The document outlines topics on engineering graphics for degree including regular polyhedra, prisms, pyramids, solids of revolution, frustums, truncated solids, and projections of various solids. It provides articles, figures, problems, and slides on concepts such as the nomenclature of prisms and pyramids, positions of solids relative to reference planes, and projections of solids with axes perpendicular, parallel, or inclined to the horizontal and vertical planes. The document serves as a reference for getting details on engineering graphics.
Ch 12 egg. gra - projection of planes
The document outlines slides from a lecture on engineering graphics for projecting planes. It includes an introduction to projecting planes and figures showing how to project planes in different orientations, such as parallel or perpendicular to the horizontal and vertical planes. There are also example problems projecting shapes such as squares, pentagons, circles, and hexagons in different orientations relative to the planes. The document consists of over 20 slides with figures and examples demonstrating how to project planar objects in engineering drawings.
More Related Content
Viewers also liked
Unit 3 Cell Theory And Organelles
The document discusses the cell theory and structure and function of cells. It notes that the cell theory developed from early microscopy studies and contributions from many scientists. The cell theory has three main principles: all organisms are made of cells, all cells come from preexisting cells, and the cell is the basic unit of life. The document also describes key components of cell structure including the nucleus, organelles, cytoskeleton, and cell membrane. It explains functions of organelles such as the endoplasmic reticulum, mitochondria, and lysosomes.
Mehul mathematics conics
This document discusses various conic sections including parabolas, hyperbolas, circles and ellipses. These curves are formed by the intersection of a plane with a double napped right circular cone. The type of conic section depends on the angle between the plane and the cone. Parabolas have a focus and directrix. Ellipses have two fixed foci and the sum of the distances from any point on the ellipse to the two foci is a constant. Hyperbolas also have two foci but the difference of the distances from any point to the two foci is a constant. Key properties of each type of conic section such as axes, foci, eccentricity and latus rectum are
1515 conics
Mathematics (from Greek μάθημα máthēma, “knowledge, study, learning”) is the study of topics such as quantity (numbers), structure, space, and change. There is a range of views among mathematicians and philosophers as to the exact scope and definition of mathematics
Conics
The document discusses hyperbolas, which are conic sections that have two disconnected branches. Key elements of a hyperbola include its foci, vertices, transverse/conjugate axes, center, and asymptotes. The eccentricity measures the "bendiness" of the hyperbola. Equations of hyperbolas depend on whether the transverse axis is horizontal or vertical. The document provides examples and exercises on finding equations and properties of hyperbolas given certain information.
problems on conics
This document contains 5 problems identifying different conic sections from their equations. Problem 1 identifies -3x^2 + y + 2 = 0 as a parabola. Problem 2 identifies 2x^2 +3xy - 4y^2 + 2x - 3y + 1 = 0 as a hyperbola. Problem 3 identifies 2x^2 -3y^2 = 0 as a hyperbola. Problem 4 identifies -3x^2 + xy - 2y^2 + 4 = 0 as either an ellipse or circle. Problem 5 identifies x = 0 as a degenerate conic that is a line.
Applications of conic and vectors
This document discusses applications of vectors and conics in multivariable calculus. It provides definitions of conic sections including parabolas, circles, ellipses, and hyperbolas. Applications of conics discussed include using the elliptical path of reflection in lithotripsy to break up kidney stones, the design of whispering galleries, and elliptical billiard tables. Additional applications mentioned are the elliptical orbit of planets and the use of parabolic mirrors. Examples of vector applications given are determining landing points while crossing a river, accounting for wind in airplane flight, and the orbital radius vector of planets around the sun.
Conic Sections
Conics are plane curves formed by cutting a double right circular cone with a plane. The type of conic section depends on the angle of the cutting plane to the cone's axis: a circle for perpendicular, ellipse for non-perpendicular, parabola for parallel to the edge, and hyperbola for intersecting both cones. A parabola is the set of points equidistant from a focus point and directrix line, with the vertex halfway between them. The latus rectum connects the endpoints equidistant from the focus, determining how wide the parabola opens. The four types of parabolas depend on the axis and opening direction.
Technology Infused Lesson Plan
This lesson plan introduces students to conic sections through interactive activities using Geometer's Sketchpad, Conic Flyer, TI-84 calculators, and comic creation software. Over two days, students will manipulate virtual conics to discover properties like center and intercepts. They will reinforce this by using TI applications and create comics demonstrating their understanding. The plan aims to differentiate instruction through collaborative, technology-enhanced activities addressing higher-order thinking according to state standards.
Circles
Conic sections are shapes formed by the intersection of a plane and a double cone. A hyperbola occurs if the plane cuts through both cones. A parabola occurs if the plane is parallel to the edge of the cone. An ellipse occurs if the plane is not parallel or cutting through both cones. A circle is a special case of an ellipse where the plane is perpendicular to the altitude of the cone.
1001 ch 10 day 1
The document summarizes key aspects of parabolas as conic sections:
1) A parabola is defined as the set of points in a plane that are equidistant from a fixed point (the focus) and a fixed line (the directrix).
2) The standard form of the equation of a parabola is y=ax^2, where the vertex is at the origin, the focus is on the y-axis, and the directrix is the x-axis.
3) Examples are worked through to find the equation, focus, directrix, and other properties of parabolas given information like the vertex or standard form equation.
1576 parabola
Mathematics (from Greek μάθημα máthēma, “knowledge, study, learning”) is the study of topics such as quantity (numbers), structure, space, and change. There is a range of views among mathematicians and philosophers as to the exact scope and definition of mathematics
Engg. curves
The document discusses various types of engineering curves including conics, cycloids, involutes, spirals, and helices. It provides definitions and construction methods for different conic sections obtained from intersecting a right circular cone with cutting planes in different positions relative to the axis. Specifically, it describes how triangles, circles, ellipses, parabolas, and hyperbolas can be obtained and provides step-by-step methods for constructing ellipses using concentric circles, rectangles, oblongs, arcs of circles, and rhombuses. It also demonstrates how to construct parabolas and use directrix-focus definitions to draw ellipses, parabolas, and other curves.
Sec9.1 conics
This document discusses parabolas and provides examples of writing equations of and graphing parabolas given characteristics like the vertex, focus, and directrix. It defines a parabola as the set of all points equidistant from a fixed point (the focus) and a fixed line (the directrix). Examples show how to find the equation of a parabola with a given vertex and focus, graph parabolas, and solve applied problems involving the reflective properties of parabolas.
Curve generation %a1 v involute and evolute
The document discusses evolutes and involutes of curves. It defines an evolute as the locus of the centers of curvature of a curve, and an involute as a curve that is traced by a point on a taut string unwinding from the evolute. Specifically:
- The evolute of a curve is the envelope of its normals, and the original curve is the involute of its evolute.
- Examples of evolutes include the semi-cubic parabola as the evolute of a parabola, and an equal spiral as the evolute of an equiangular spiral.
- Involutes can be used to generate gear teeth profiles, with the teeth profiles drawn as invol
Conicsections dpsvk
The document discusses the history and properties of conic sections - circles, ellipses, parabolas, and hyperbolas. It describes how each curve is formed by slicing a cone at different angles and discusses key properties like equations and relationships to foci. Examples of how each conic section appears in nature and technology are also provided.
Conics Scribe Post
Mr. K taught the class about conic sections by making cuts on a cone with his meter stick. He showed that a horizontal cut forms a circle, an angled cut forms an ellipse, and steeper cuts form a parabola and hyperbola. Later, students constructed parabolas by folding strips of paper and drawing along the creases. This demonstrated properties of the parabola involving points on the curve and its directrix.
Engineering Curves
The document discusses different types of engineering curves known as conics that are formed by the intersection of a cutting plane with a cone. These conics include ellipses, parabolas, hyperbolas, circles, and triangles. The document provides definitions, examples of uses, and methods for drawing each type of conic section. It specifically describes how to construct ellipses, parabolas, and hyperbolas using different geometric techniques such as the arc of a circle, concentric circles, directrix-focus, and rectangular methods.
Cell Theory Discussion
The document summarizes key concepts about cells including their discovery, organization of life, and cell theory. It describes how Robert Hooke first observed cells using a microscope in 1665 and how Anton van Leeuwenhoek later observed bacteria and other microorganisms. It also outlines how Matthias Schleiden and Theodor Schwann developed the cell theory, concluding that all organisms are composed of cells, cells are the basic unit of life, and all cells come from preexisting cells. The document also distinguishes between prokaryotic and eukaryotic cells.
Portion Distortion
This document provides information about portion distortion over the past 20 years and how larger portions can lead to excess calorie intake. It shows examples of how portions have increased for various foods like bagels, spaghetti, hamburgers, sodas, and cookies. For each food item, it estimates the additional calories consumed and the amount of physical activity needed to burn off those extra calories. The document also introduces MyPlate guidelines as a tool for healthy portion sizes.
Chapter 7.2 parabola
The document discusses parabolas, including their key properties and equations. It defines a parabola as the set of points equidistant from a fixed point (the focus) and a fixed line (the directrix). The document derives the standard equation of a parabola from this definition and discusses how to graph parabolas based on their equations. It also covers transformations, latus rectum, and other geometric properties of parabolas.
Viewers also liked (20)
More from Sajan Baig
Ch 13 egg. gra - projection of p solids
The document outlines topics on engineering graphics for degree including regular polyhedra, prisms, pyramids, solids of revolution, frustums, truncated solids, and projections of various solids. It provides articles, figures, problems, and slides on concepts such as the nomenclature of prisms and pyramids, positions of solids relative to reference planes, and projections of solids with axes perpendicular, parallel, or inclined to the horizontal and vertical planes. The document serves as a reference for getting details on engineering graphics.
Ch 12 egg. gra - projection of planes
The document outlines slides from a lecture on engineering graphics for projecting planes. It includes an introduction to projecting planes and figures showing how to project planes in different orientations, such as parallel or perpendicular to the horizontal and vertical planes. There are also example problems projecting shapes such as squares, pentagons, circles, and hexagons in different orientations relative to the planes. The document consists of over 20 slides with figures and examples demonstrating how to project planar objects in engineering drawings.
Ch 11 egg. gra - projection of straight line
This document contains slides from a presentation or document on projections of straight lines in space. It includes sections on lines parallel or perpendicular to reference planes, finding the true length and inclinations of a line, rotating plane methods, midpoint problems, and a three slide table with the projections of straight lines in different orientations in space. The document appears to be from a textbook on engineering graphics and contains examples and practice problems related to projecting lines in three dimensions.
Ch 10 egg. gra - projection of points
The document discusses engineering graphics and the projection of points in space. It includes introductions to generating solids and planes, conventional representations, and locating points in space. There are sections on projecting points in the first and third quadrants, with rules for projections. Multiple problems are referenced with corresponding figures. A table shows the positions of points in different quadrants and their projections. The document directs the reader to an engineering graphics textbook for more details.
Ch 7 egg. gra - miscellaneous curves
The document references an engineering graphics textbook and provides slide numbers for chapters on involutes of a circle, hypocycloids, and cycloids. It directs the reader to a blog for more details on these topics, which involve curves generated by a point on a circle rolling along a fixed circle or straight line.
Ch 4 egg. gra - scales
This document discusses different types of scales used for technical drawings, including plane, diagonal, vernier, and comparative scales. It lists the topics that will be covered, such as the definitions of representative fractions, classifications of scales, and examples and problems for using different scales. The document directs the reader to additional resources for more details on engineering graphics and scale topics.
Ch 3 egg. gra. geometrical constructions
This document discusses various geometrical constructions including bisecting lines, arcs, and angles. It provides figures and articles on bisecting and dividing lines, bisecting arcs, measuring angles between lines, measuring arc lengths, drawing arcs through points and between circles. The document also covers constructing regular polygons such as hexagons and heptagons, inscribing and superscribing circles, and inscribing three circles. The content is from a chapter on geometrical constructions in an engineering graphics textbook.
Ch 2 egg. gra - lines.....
The document discusses engineering graphics concepts including:
- Types of lines and dimensions
- Order of priority for coinciding lines
- Methods for dimensioning
- Indicating circles, radii, squares, and spheres
- Isometric dimensioning
- Drawing and title block layout
It recommends studying BIS codes in detail and provides exercises for students to practice drawing lines and lettering.
Ch 1 egg. gra - intro
The document discusses engineering graphics and why students find it difficult. It asks what engineering graphics is, why it is a compulsory subject for all engineering students, and why students find it difficult to understand. It poses questions about how teachers can help students solve these problems and what students can do to address issues. The document provides guidance on key concepts in engineering graphics and exercises for students to practice techniques and identify errors in their drawings.
More from Sajan Baig (9)
Recently uploaded
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Ch 6 egg. gra - conic sections
- 2. SLIDE – 6.0 Refer: Engineering Graphics for Degree By Prof. P.I. Varghese For Getting More Details Page: 6.1 Introduction Fig: 6.1 Double Cone cut by Different Section planes Art: 6.3 Types of Conic Sections Fig: 6.2 Types of Conic Sections Art; 6.4 Terminology of Conics Fig: 6.3 Terminology of Conics Art: 6.5 Conic sections defined as loci Art: 6.6 Some important properties of Conics Art: 6.7 Ellipse central Conic Prob: 6.1 Construction of an Ellipse (Eccentricity methods) sajanedu.blogspot.in
- 3. Art: 6.9 Parabola Prob: 6.23 Construction of a Parabola (Eccentricity methods) Prob: 6.25 Construction of Parabola (Rectangular Methods) Art: 6.12 Terminology Hyperbola Art: 6.13 Rectangular or Equilateral Hyperbola SLIDE – 6.00 sajanedu.blogspot.in