Ch 13 egg. gra - projection of p solids
•Download as PPTX, PDF•
4 likes•713 views
The document outlines topics on engineering graphics for degree including regular polyhedra, prisms, pyramids, solids of revolution, frustums, truncated solids, and projections of various solids. It provides articles, figures, problems, and slides on concepts such as the nomenclature of prisms and pyramids, positions of solids relative to reference planes, and projections of solids with axes perpendicular, parallel, or inclined to the horizontal and vertical planes. The document serves as a reference for getting details on engineering graphics.
Report
Share
Report
Share
Recommended
Ch 12 egg. gra - projection of planes
The document outlines slides from a lecture on engineering graphics for projecting planes. It includes an introduction to projecting planes and figures showing how to project planes in different orientations, such as parallel or perpendicular to the horizontal and vertical planes. There are also example problems projecting shapes such as squares, pentagons, circles, and hexagons in different orientations relative to the planes. The document consists of over 20 slides with figures and examples demonstrating how to project planar objects in engineering drawings.
Ch 11 egg. gra - projection of straight line
This document contains slides from a presentation or document on projections of straight lines in space. It includes sections on lines parallel or perpendicular to reference planes, finding the true length and inclinations of a line, rotating plane methods, midpoint problems, and a three slide table with the projections of straight lines in different orientations in space. The document appears to be from a textbook on engineering graphics and contains examples and practice problems related to projecting lines in three dimensions.
Projection Of Plane
This document discusses the projection of planes in three dimensions. It defines a plane as a two-dimensional surface that can be defined by three non-collinear points, two intersecting lines, a line and a point not on the line, or two parallel lines. Planes can be positioned parallel to one reference plane and perpendicular to the other two, perpendicular to one reference plane and inclined to the other two, or inclined to all three reference planes. Examples of each type of plane positioning are shown along with solutions to three exercises involving drawing the projections of different shaped planes.
Projection of Solids
The document discusses the projection of solids in engineering graphics. It describes different types of solids including polyhedra like cubes and pyramids. It also covers solids of revolution like cylinders and cones. It explains how to project these solids by assuming their position and drawing front and top views in three steps. Dimensional parameters, inclined positions, and problems involving various solids are also covered.
projections of planes
Types of Planes,Projection of Plane parallel to one plane and perpendicular to other plane, Projection of Plane inclined to one plane and perpendicular to other plane,orthographic projections of planes, first angle projection
Projections of Planes
The document discusses various methods for projecting planes in engineering graphics. It provides step-by-step procedures for drawing projections of planes in different orientations and positions in space. Several example problems are presented with diagrams showing how to draw the front, top, and side views of planes such as rectangles, triangles, and other shapes in various orientations. Methods are described for determining the true shape, size, and angles between planes based on their given projections.
Projections of planes ppt
This document discusses the projection of planes. It defines a plane as a two-dimensional object with length and breadth but negligible thickness. There are two main types of planes: perpendicular and oblique. Perpendicular planes are perpendicular to one of the principal planes of projection, while oblique planes are inclined to both. The document provides examples of different orientations of perpendicular planes and their appearances in top and front views. It also gives an example problem showing the projection of an inclined plane.
Mechanical Drafting Projection of solids
The document discusses the projection of solids in mechanical drafting. It begins with an introduction to projections and classifications of projections. It then discusses various types of solids like polyhedrons, prisms, pyramids, and solids of revolution. The document focuses on the orientation of solids, describing the six possible orientations with examples. It provides detailed steps for projecting a solid when its axis is inclined to both the horizontal and vertical planes.
Recommended
Ch 12 egg. gra - projection of planes
The document outlines slides from a lecture on engineering graphics for projecting planes. It includes an introduction to projecting planes and figures showing how to project planes in different orientations, such as parallel or perpendicular to the horizontal and vertical planes. There are also example problems projecting shapes such as squares, pentagons, circles, and hexagons in different orientations relative to the planes. The document consists of over 20 slides with figures and examples demonstrating how to project planar objects in engineering drawings.
Ch 11 egg. gra - projection of straight line
This document contains slides from a presentation or document on projections of straight lines in space. It includes sections on lines parallel or perpendicular to reference planes, finding the true length and inclinations of a line, rotating plane methods, midpoint problems, and a three slide table with the projections of straight lines in different orientations in space. The document appears to be from a textbook on engineering graphics and contains examples and practice problems related to projecting lines in three dimensions.
Projection Of Plane
This document discusses the projection of planes in three dimensions. It defines a plane as a two-dimensional surface that can be defined by three non-collinear points, two intersecting lines, a line and a point not on the line, or two parallel lines. Planes can be positioned parallel to one reference plane and perpendicular to the other two, perpendicular to one reference plane and inclined to the other two, or inclined to all three reference planes. Examples of each type of plane positioning are shown along with solutions to three exercises involving drawing the projections of different shaped planes.
Projection of Solids
The document discusses the projection of solids in engineering graphics. It describes different types of solids including polyhedra like cubes and pyramids. It also covers solids of revolution like cylinders and cones. It explains how to project these solids by assuming their position and drawing front and top views in three steps. Dimensional parameters, inclined positions, and problems involving various solids are also covered.
projections of planes
Types of Planes,Projection of Plane parallel to one plane and perpendicular to other plane, Projection of Plane inclined to one plane and perpendicular to other plane,orthographic projections of planes, first angle projection
Projections of Planes
The document discusses various methods for projecting planes in engineering graphics. It provides step-by-step procedures for drawing projections of planes in different orientations and positions in space. Several example problems are presented with diagrams showing how to draw the front, top, and side views of planes such as rectangles, triangles, and other shapes in various orientations. Methods are described for determining the true shape, size, and angles between planes based on their given projections.
Projections of planes ppt
This document discusses the projection of planes. It defines a plane as a two-dimensional object with length and breadth but negligible thickness. There are two main types of planes: perpendicular and oblique. Perpendicular planes are perpendicular to one of the principal planes of projection, while oblique planes are inclined to both. The document provides examples of different orientations of perpendicular planes and their appearances in top and front views. It also gives an example problem showing the projection of an inclined plane.
Mechanical Drafting Projection of solids
The document discusses the projection of solids in mechanical drafting. It begins with an introduction to projections and classifications of projections. It then discusses various types of solids like polyhedrons, prisms, pyramids, and solids of revolution. The document focuses on the orientation of solids, describing the six possible orientations with examples. It provides detailed steps for projecting a solid when its axis is inclined to both the horizontal and vertical planes.
projection if solid
This document discusses the projection of solids in engineering graphics. It covers 5 cases of solid projection depending on the axis orientation relative to the reference planes. It also provides an example of projecting a pentagonal prism with the axis inclined at 45 degrees to the vertical plane and resting on its base on the horizontal plane. The example summary explains that since the axis is inclined to the vertical plane, the base must be drawn perpendicular to the vertical plane in the front view with one side on the XY line.
Projection of-solid
The document defines and classifies different types of solids and their projections. It describes solids as three-dimensional objects bounded by surfaces that can be curved or flat. Solids are classified as polyhedra or solids of revolution. Polyhedra include prisms, pyramids, and regular polyhedra like cubes. Solids of revolution are generated by rotating a plane figure around an axis, and include cylinders, cones, spheres and other shapes. The document also defines important terms used in projections of solids, such as axis, apex, edges, and provides examples of how to draw multi-view projections of different solids.
Unit ii projection of points
introduction of engineering graphics ,projection of points,lines,planes,solids,section of solids,development of surfaces,isometric projection,perspective projection
Eg.ppt
This document discusses the basic tools used for technical drawing and engineering graphics (EG). It describes commonly used drawing tools like pencils, drawing boards, T-squares, rulers, scales, compasses, and drafting machines. It also provides details on the different types of planes (perpendicular and oblique) and how they are projected, including examples of planes positioned perpendicular to and inclined from the horizontal and vertical planes.
Engineering Graphics - Projection of points and lines
The document discusses different types of projections of points and lines in space. It describes 9 types of point projections based on their location relative to the horizontal and vertical planes. It then explains the different notations used for projecting lines, including their true length, front view length, top view length, and inclinations. Finally, it presents examples of different cases of projecting lines, including when lines are parallel or inclined to the planes.
PROJECTION OF POINTS
This document discusses the projection of points in solid geometry. It covers 9 different positions or orientations that a point can have in space relative to the horizontal and vertical planes. For each position, it shows the 3D representation of the point and its projections on the horizontal and vertical planes, labeled as the front view (F.V.) and top view (T.V.). Brief conclusions are provided to describe the orientation of the point in 3D space and the locations of its projections in 2D for each case.
Projection of solids
Its use for all students who know about projection of solid and many more.I'm upload this for all engineering students.thank you.......@#!&
Unit 5
This document discusses different types of solids and their properties. It provides steps for solving problems involving solids.
Group A solids like cylinders and prisms have bases and tops of the same shape. Group B solids like cones and pyramids have a point top called an apex.
Problems involving solids are solved in three steps: 1) assume the solid is standing on its plane of inclination, 2) draw front and top views considering the inclination axis, 3) draw final views considering any remaining inclinations.
Several example problems are provided and walked through step-by-step to demonstrate how to draw the projections of solids in different orientations. Freely suspended solids have their
Projection of Planes- Engineering Graphics
This document contains 44 problems involving drawing multi-view projections of triangular, rectangular, pentagonal, and hexagonal plane laminae in different orientations relative to reference planes (HP and VP). Each problem provides the shape and dimensions of the lamina, how it is positioned relative to the reference planes, and any other relevant information. The corresponding solutions provide top, front, and sometimes left side view drawings of the lamina(e) based on the given information in each problem.
Ortographic projection - ENGINEERING DRAWING/GRAPHICS
Ortographic projection
THIS SLIDE CONTAINS WHOLE SYLLABUS OF ENGINEERING DRAWING/GRAPHICS. IT IS THE MOST SIMPLE AND INTERACTIVE WAY TO LEARN ENGINEERING DRAWING.SYLLABUS IS RELATED TO rajiv gandhi proudyogiki vishwavidyalaya / rajiv gandhi TECHNICAL UNIVERSITY ,BHOPAL.
Eg3 n
The document discusses different concepts related to projections of planes and solids in engineering drawing. It defines principal planes and different types of secondary planes like planes perpendicular or parallel to reference planes. It also defines auxiliary planes as planes inclined to one reference plane and perpendicular to the other. Some examples of auxiliary planes described are auxiliary vertical plane and auxiliary inclined plane. The document provides different questions related to projections of planes, solids and their sections along with their solutions. It includes problems on finding true shapes of different sections and determining inclination of cutting planes.
Eg unit ii projection of points
This document discusses the projection of points in engineering graphics. It defines key terms like vertical plane, horizontal plane, and reference line. It explains how to project points located in different quadrants and planes. Examples are provided to demonstrate how to draw the projections of points given their position relative to the horizontal and vertical planes. The document also discusses determining the inclination and distance of projected points.
Eg unit ii projection of lines
This document contains lecture content on the projection of lines in engineering graphics. It discusses the different positions and orientations that a line can have in space and how to draw the top, front and side view projections of lines based on their position relative to the view planes. Examples are provided to demonstrate how to draw projections of lines that are parallel or inclined to the horizontal and vertical planes. The document also covers finding the true length and inclination angles of lines from their projections.
6 projections of lines, points, planes
This document provides information about engineering graphics and orthographic projections. It begins by introducing projections of points, lines, planes and solids. It then discusses coordinates and quadrants. The majority of the document explains how to draw orthographic projections of various geometric elements including points in different quadrants, straight lines in different orientations, planes in different positions, and solids. It provides examples and step-by-step instructions for creating projections of these elements in first, second, third and fourth quadrants. The document concludes by introducing different types of solids and announcing details about an upcoming exam.
Development of surfaces of solids
1. A cone with a 50mm base diameter and 70mm axis is cut by a section plane inclined at 45 degrees to the horizontal plane through the base end of an end generator.
2. The projections, sectional views, true shape of the section, and development of the remaining solid are drawn.
3. Key features included the section plane cutting the cone, projections showing the cut portion, and the true shape and development unfolding the remaining surface.
Engineering graphic ii my work
This document discusses projections of solids and sectioning of solids in engineering graphics. It covers topics like types of solids, projections of solids in simple positions with axes perpendicular or parallel to reference planes, and projections of solids with inclined axes. It also discusses sectioning of solids using different section planes, types of section planes, and illustrates terms used in sectioning like section lines and true/apparent shapes of sections. Example problems on projections and sectioning of solids like cones, pyramids and prisms are presented.
Development of surfaces of solids
Development of surfaces of solids - By : http://www.hackingmonk.com
Download Link: http://safemylinks.com/d/c828e76c66
Projections of solids
The document discusses the projection of solids and provides examples of how to project solids in different positions. It describes how to project solids when the axis is perpendicular to or parallel to the horizontal and vertical planes. It also explains how to project solids when the axis is inclined to one of the planes. Examples are provided for projecting prisms, pyramids, cylinders and cones in various positions.
Projection of planes
1. The document discusses the procedure for projecting plane figures by considering their position and orientation relative to the horizontal and vertical planes.
2. It explains that the position of a plane figure will be defined by specifying the inclination of its surface to one reference plane and the inclination of one of its edges to the other plane.
3. The document provides examples of applying the three step procedure to solve projection problems: 1) assume initial position and draw front and top views, 2) consider surface inclination and redraw views, 3) consider edge inclination and draw final views.
Projection of planes
The document provides information on the projection of plane figures:
1) It explains the basics of plane projection problems, including what is typically given (projections of the plane) and asked for (its position relative to reference planes).
2) Plane figures can have their surface parallel or inclined to the horizontal or vertical planes, and edges parallel or inclined to the other reference plane. The document demonstrates solving problems through 3 steps of initial positioning, surface inclination, and edge inclination.
3) Several example problems are worked through step-by-step to show determining the front, top, and side views of planes in different orientations, such as a pentagon inclined to the horizontal plane and a side to the vertical plane
Ch 10 egg. gra - projection of points
The document discusses engineering graphics and the projection of points in space. It includes introductions to generating solids and planes, conventional representations, and locating points in space. There are sections on projecting points in the first and third quadrants, with rules for projections. Multiple problems are referenced with corresponding figures. A table shows the positions of points in different quadrants and their projections. The document directs the reader to an engineering graphics textbook for more details.
Ch 7 egg. gra - miscellaneous curves
The document references an engineering graphics textbook and provides slide numbers for chapters on involutes of a circle, hypocycloids, and cycloids. It directs the reader to a blog for more details on these topics, which involve curves generated by a point on a circle rolling along a fixed circle or straight line.
More Related Content
What's hot
projection if solid
This document discusses the projection of solids in engineering graphics. It covers 5 cases of solid projection depending on the axis orientation relative to the reference planes. It also provides an example of projecting a pentagonal prism with the axis inclined at 45 degrees to the vertical plane and resting on its base on the horizontal plane. The example summary explains that since the axis is inclined to the vertical plane, the base must be drawn perpendicular to the vertical plane in the front view with one side on the XY line.
Projection of-solid
The document defines and classifies different types of solids and their projections. It describes solids as three-dimensional objects bounded by surfaces that can be curved or flat. Solids are classified as polyhedra or solids of revolution. Polyhedra include prisms, pyramids, and regular polyhedra like cubes. Solids of revolution are generated by rotating a plane figure around an axis, and include cylinders, cones, spheres and other shapes. The document also defines important terms used in projections of solids, such as axis, apex, edges, and provides examples of how to draw multi-view projections of different solids.
Unit ii projection of points
introduction of engineering graphics ,projection of points,lines,planes,solids,section of solids,development of surfaces,isometric projection,perspective projection
Eg.ppt
This document discusses the basic tools used for technical drawing and engineering graphics (EG). It describes commonly used drawing tools like pencils, drawing boards, T-squares, rulers, scales, compasses, and drafting machines. It also provides details on the different types of planes (perpendicular and oblique) and how they are projected, including examples of planes positioned perpendicular to and inclined from the horizontal and vertical planes.
Engineering Graphics - Projection of points and lines
The document discusses different types of projections of points and lines in space. It describes 9 types of point projections based on their location relative to the horizontal and vertical planes. It then explains the different notations used for projecting lines, including their true length, front view length, top view length, and inclinations. Finally, it presents examples of different cases of projecting lines, including when lines are parallel or inclined to the planes.
PROJECTION OF POINTS
This document discusses the projection of points in solid geometry. It covers 9 different positions or orientations that a point can have in space relative to the horizontal and vertical planes. For each position, it shows the 3D representation of the point and its projections on the horizontal and vertical planes, labeled as the front view (F.V.) and top view (T.V.). Brief conclusions are provided to describe the orientation of the point in 3D space and the locations of its projections in 2D for each case.
Projection of solids
Its use for all students who know about projection of solid and many more.I'm upload this for all engineering students.thank you.......@#!&
Unit 5
This document discusses different types of solids and their properties. It provides steps for solving problems involving solids.
Group A solids like cylinders and prisms have bases and tops of the same shape. Group B solids like cones and pyramids have a point top called an apex.
Problems involving solids are solved in three steps: 1) assume the solid is standing on its plane of inclination, 2) draw front and top views considering the inclination axis, 3) draw final views considering any remaining inclinations.
Several example problems are provided and walked through step-by-step to demonstrate how to draw the projections of solids in different orientations. Freely suspended solids have their
Projection of Planes- Engineering Graphics
This document contains 44 problems involving drawing multi-view projections of triangular, rectangular, pentagonal, and hexagonal plane laminae in different orientations relative to reference planes (HP and VP). Each problem provides the shape and dimensions of the lamina, how it is positioned relative to the reference planes, and any other relevant information. The corresponding solutions provide top, front, and sometimes left side view drawings of the lamina(e) based on the given information in each problem.
Ortographic projection - ENGINEERING DRAWING/GRAPHICS
Ortographic projection
THIS SLIDE CONTAINS WHOLE SYLLABUS OF ENGINEERING DRAWING/GRAPHICS. IT IS THE MOST SIMPLE AND INTERACTIVE WAY TO LEARN ENGINEERING DRAWING.SYLLABUS IS RELATED TO rajiv gandhi proudyogiki vishwavidyalaya / rajiv gandhi TECHNICAL UNIVERSITY ,BHOPAL.
Eg3 n
The document discusses different concepts related to projections of planes and solids in engineering drawing. It defines principal planes and different types of secondary planes like planes perpendicular or parallel to reference planes. It also defines auxiliary planes as planes inclined to one reference plane and perpendicular to the other. Some examples of auxiliary planes described are auxiliary vertical plane and auxiliary inclined plane. The document provides different questions related to projections of planes, solids and their sections along with their solutions. It includes problems on finding true shapes of different sections and determining inclination of cutting planes.
Eg unit ii projection of points
This document discusses the projection of points in engineering graphics. It defines key terms like vertical plane, horizontal plane, and reference line. It explains how to project points located in different quadrants and planes. Examples are provided to demonstrate how to draw the projections of points given their position relative to the horizontal and vertical planes. The document also discusses determining the inclination and distance of projected points.
Eg unit ii projection of lines
This document contains lecture content on the projection of lines in engineering graphics. It discusses the different positions and orientations that a line can have in space and how to draw the top, front and side view projections of lines based on their position relative to the view planes. Examples are provided to demonstrate how to draw projections of lines that are parallel or inclined to the horizontal and vertical planes. The document also covers finding the true length and inclination angles of lines from their projections.
6 projections of lines, points, planes
This document provides information about engineering graphics and orthographic projections. It begins by introducing projections of points, lines, planes and solids. It then discusses coordinates and quadrants. The majority of the document explains how to draw orthographic projections of various geometric elements including points in different quadrants, straight lines in different orientations, planes in different positions, and solids. It provides examples and step-by-step instructions for creating projections of these elements in first, second, third and fourth quadrants. The document concludes by introducing different types of solids and announcing details about an upcoming exam.
Development of surfaces of solids
1. A cone with a 50mm base diameter and 70mm axis is cut by a section plane inclined at 45 degrees to the horizontal plane through the base end of an end generator.
2. The projections, sectional views, true shape of the section, and development of the remaining solid are drawn.
3. Key features included the section plane cutting the cone, projections showing the cut portion, and the true shape and development unfolding the remaining surface.
Engineering graphic ii my work
This document discusses projections of solids and sectioning of solids in engineering graphics. It covers topics like types of solids, projections of solids in simple positions with axes perpendicular or parallel to reference planes, and projections of solids with inclined axes. It also discusses sectioning of solids using different section planes, types of section planes, and illustrates terms used in sectioning like section lines and true/apparent shapes of sections. Example problems on projections and sectioning of solids like cones, pyramids and prisms are presented.
Development of surfaces of solids
Development of surfaces of solids - By : http://www.hackingmonk.com
Download Link: http://safemylinks.com/d/c828e76c66
Projections of solids
The document discusses the projection of solids and provides examples of how to project solids in different positions. It describes how to project solids when the axis is perpendicular to or parallel to the horizontal and vertical planes. It also explains how to project solids when the axis is inclined to one of the planes. Examples are provided for projecting prisms, pyramids, cylinders and cones in various positions.
Projection of planes
1. The document discusses the procedure for projecting plane figures by considering their position and orientation relative to the horizontal and vertical planes.
2. It explains that the position of a plane figure will be defined by specifying the inclination of its surface to one reference plane and the inclination of one of its edges to the other plane.
3. The document provides examples of applying the three step procedure to solve projection problems: 1) assume initial position and draw front and top views, 2) consider surface inclination and redraw views, 3) consider edge inclination and draw final views.
Projection of planes
The document provides information on the projection of plane figures:
1) It explains the basics of plane projection problems, including what is typically given (projections of the plane) and asked for (its position relative to reference planes).
2) Plane figures can have their surface parallel or inclined to the horizontal or vertical planes, and edges parallel or inclined to the other reference plane. The document demonstrates solving problems through 3 steps of initial positioning, surface inclination, and edge inclination.
3) Several example problems are worked through step-by-step to show determining the front, top, and side views of planes in different orientations, such as a pentagon inclined to the horizontal plane and a side to the vertical plane
What's hot (20)
Engineering Graphics - Projection of points and lines
Engineering Graphics - Projection of points and lines
Ortographic projection - ENGINEERING DRAWING/GRAPHICS
Ortographic projection - ENGINEERING DRAWING/GRAPHICS
More from Sajan Baig
Ch 10 egg. gra - projection of points
The document discusses engineering graphics and the projection of points in space. It includes introductions to generating solids and planes, conventional representations, and locating points in space. There are sections on projecting points in the first and third quadrants, with rules for projections. Multiple problems are referenced with corresponding figures. A table shows the positions of points in different quadrants and their projections. The document directs the reader to an engineering graphics textbook for more details.
Ch 7 egg. gra - miscellaneous curves
The document references an engineering graphics textbook and provides slide numbers for chapters on involutes of a circle, hypocycloids, and cycloids. It directs the reader to a blog for more details on these topics, which involve curves generated by a point on a circle rolling along a fixed circle or straight line.
Ch 6 egg. gra - conic sections
The document discusses conic sections including ellipses, parabolas, and hyperbolas. It provides figures and articles on the introduction of conic sections, the different types of conic sections, terminology used in conics, properties of conics, ellipses as central conics, construction of ellipses and parabolas using different methods, terminology for hyperbolas, and rectangular or equilateral hyperbolas. The document contains references to slides that provide further details on various aspects of conic sections.
Ch 4 egg. gra - scales
This document discusses different types of scales used for technical drawings, including plane, diagonal, vernier, and comparative scales. It lists the topics that will be covered, such as the definitions of representative fractions, classifications of scales, and examples and problems for using different scales. The document directs the reader to additional resources for more details on engineering graphics and scale topics.
Ch 3 egg. gra. geometrical constructions
This document discusses various geometrical constructions including bisecting lines, arcs, and angles. It provides figures and articles on bisecting and dividing lines, bisecting arcs, measuring angles between lines, measuring arc lengths, drawing arcs through points and between circles. The document also covers constructing regular polygons such as hexagons and heptagons, inscribing and superscribing circles, and inscribing three circles. The content is from a chapter on geometrical constructions in an engineering graphics textbook.
Ch 2 egg. gra - lines.....
The document discusses engineering graphics concepts including:
- Types of lines and dimensions
- Order of priority for coinciding lines
- Methods for dimensioning
- Indicating circles, radii, squares, and spheres
- Isometric dimensioning
- Drawing and title block layout
It recommends studying BIS codes in detail and provides exercises for students to practice drawing lines and lettering.
Ch 1 egg. gra - intro
The document discusses engineering graphics and why students find it difficult. It asks what engineering graphics is, why it is a compulsory subject for all engineering students, and why students find it difficult to understand. It poses questions about how teachers can help students solve these problems and what students can do to address issues. The document provides guidance on key concepts in engineering graphics and exercises for students to practice techniques and identify errors in their drawings.
More from Sajan Baig (7)
Recently uploaded
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
Recently uploaded (20)
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Ch 13 egg. gra - projection of p solids
- 2. Refer: Engineering Graphics for Degree By Prof. P.I. Varghese For Getting More Details Page 13.1 Introduction Art: 13.3 Regular Polyhedra Art: 13.4 Prisms Fig: 13.4 Nomenclature of a Prism Art: 13.5 Pyramids Fig: 13.7 Nomenclature of square Pyramid Art: 13.6 Solid of Revolution sajanedu.blogspot.in
- 3. Art: 13.8 Frustums and Truncated solids Art: 13.9 Positions of Solids with respect to the Reference Planes Art: 13.11 Projections of a Solid with Axis Perpendicular to H.P. And Parallel to V.P. Art: 13.12 Projections of a Solids with its axis…. Art: 13.13 Projections of A solids with its axis parallel to both H.P. and V.P. Art: 13.14 Projections of a Solid whose axis is inclined to H.P. and Parallel to V.P. Prob: 13.1 Square Prism resting on H.P. Prob: 13.2 Projection of a Triangular prism resting on H.P. Prob: 13.4 Projections of a Pentagonal Prism Prob: 13.5 Projections of a Cone Prob: 13.6 Projections of Triangular Prism Prob: 13.7 Projections of a cube. SLIDE – 13.00 sajanedu.blogspot.in
- 4. Prob: 13.8 Projections of Hexagonal Prism Prob: 13.9 Projections of Square Pyramids Prob: 13.11 Projections of Cone axis inclined Prob: 13.12 Projections of a Cube equally inclined to both H.P. and V.P Prob: 13.13 Projections of a Hexagonal Prism Prob: 13.14 Projections of a Pentagonal Pyramid (Axis inclined to xy-line) Prob: 13.15 Projections of a Pentagonal Pyramid (Axis inclined to V.P) Prob: 13.16 Projections of a Cone lying on its generator Prob: 13.24 Projections of a Pyramid (Axis inclined to H.P.) Prob: 13.26 Projections of a square Pyramid (triangular face vertical) Prob: 13.29 Projections of a Cone apex touching V.P. Prob: 13.32 Projections of a square pyramid hanging from one corner Art: 13.21 Projections of Solids on auxiliary planes Prob: 13.38 Projections of Cube (Auxiliary plane methods) Prob: 13.40 Projections of a Cube (Auxiliary plane methods) SLIDE – 13.000 sajanedu.blogspot.in