This document summarizes Kirloskar Brothers Limited's SCT and SCT Extended split case pumps. The pumps are suitable for applications like water works, industries, paper mills, and more. Key features include rugged casing for low vibration, high efficiencies, low NPSHR values, and the ability to change the direction of rotation without replacing components. The product range includes 36 models with capacities up to 3500 cubic meters per hour and heads up to 140 meters. Vertical installation options provide a compact design and reduce costs.
This document summarizes the process of preparing a tundish for continuous casting of steel. It discusses what a tundish is, the different lining layers including insulation, backup, and working linings. It details the steps to deskull, cool, and apply each lining layer. Key tundish furniture like the submerged entry nozzle and stopper are also described. The final steps of preheating the tundish and attached equipment before use in continuous casting are outlined.
This document provides information on various types of pipes and pipe fittings including:
- Plastic pipes made from fiberglass, HDPE, and PVC
- Manhole covers and gratings made from GRP and ductile iron
- Carbon steel and stainless steel seamless pipes for high temperature, fluid conveyance, and oil/gas/water pipelines
- Ductile iron pipes coated for corrosion protection and lined internally
- Mechanical pipe joining systems for water treatment plants
- Casing pipes for oil and gas wells
- Pipe alignment and reforming clamps for welding
- Pipe cutting and beveling machines
- Expansion joints, hangers, and hoses to compensate for pipe movement
Vibration Characteristics in Cantilever Stationary SyphonsKadant Inc.
Most high-speed paper machine dryers operate with stationary cantilever syphons and dryer bars. Modern cantilever stationary syphons are rigidly mounted to the dryer bearing housings and they provide a reliable system of support. Dryer bars provide for high rates of heat transfer with excellent heat transfer and profile uniformity.
This document provides an overview of continuous casting of aluminium, specifically focusing on strip casting and wire bar casting technologies. It describes the basic principles of continuous casting, including key features like using rotating drums or belts to form a mould for molten aluminium. It discusses different types of casters like twin drum casters, single drum casters, and those using belts or blocks. It also addresses properties of continuously cast products and their behavior in further processing like rolling. The document aims to give readers an understanding of the possibilities and limitations of continuous casting aluminium.
Drive Power and Torque in Paper Machine DryersKadant Inc.
basic parameter in the design of a paper machine dryer drive system, whether it has an open gear, enclosed gear, or felt drive, is the drive power requirement. Previous work on the drive power for paper machine dryers covered a 1.5 meter diameter cylinder. This paper presents the results for both 1.5 and 1.83 meter diameter cylinders with and without dryer bars.
Dryer doctors have a number of purposes in a paper machine dryer section: sheet shedding, dryer surface cleaning, threading, and air handling and control. Paper dryer doctors are often overlooked in the papermaking process, but they need proper attention to maintain efficient dryer operation.
Effectiveness of Paper Dryer Journal Insulating SleevesKadant Inc.
The document analyzes the effectiveness of insulating sleeves used in paper dryers. Thermal analysis and experimental testing show that insulating sleeves significantly reduce the temperature of dryer journals and the rate of temperature change during startup and operation. This protection helps prevent bearing failures caused by differential thermal expansion between the journal and bearing. Testing confirms that a properly sealed insulating sleeve reduces heat transfer to the bearing from around 3 kW to 1 kW, helping to maintain proper oil viscosity and lubrication.
This document summarizes Kirloskar Brothers Limited's SCT and SCT Extended split case pumps. The pumps are suitable for applications like water works, industries, paper mills, and more. Key features include rugged casing for low vibration, high efficiencies, low NPSHR values, and the ability to change the direction of rotation without replacing components. The product range includes 36 models with capacities up to 3500 cubic meters per hour and heads up to 140 meters. Vertical installation options provide a compact design and reduce costs.
This document summarizes the process of preparing a tundish for continuous casting of steel. It discusses what a tundish is, the different lining layers including insulation, backup, and working linings. It details the steps to deskull, cool, and apply each lining layer. Key tundish furniture like the submerged entry nozzle and stopper are also described. The final steps of preheating the tundish and attached equipment before use in continuous casting are outlined.
This document provides information on various types of pipes and pipe fittings including:
- Plastic pipes made from fiberglass, HDPE, and PVC
- Manhole covers and gratings made from GRP and ductile iron
- Carbon steel and stainless steel seamless pipes for high temperature, fluid conveyance, and oil/gas/water pipelines
- Ductile iron pipes coated for corrosion protection and lined internally
- Mechanical pipe joining systems for water treatment plants
- Casing pipes for oil and gas wells
- Pipe alignment and reforming clamps for welding
- Pipe cutting and beveling machines
- Expansion joints, hangers, and hoses to compensate for pipe movement
Vibration Characteristics in Cantilever Stationary SyphonsKadant Inc.
Most high-speed paper machine dryers operate with stationary cantilever syphons and dryer bars. Modern cantilever stationary syphons are rigidly mounted to the dryer bearing housings and they provide a reliable system of support. Dryer bars provide for high rates of heat transfer with excellent heat transfer and profile uniformity.
This document provides an overview of continuous casting of aluminium, specifically focusing on strip casting and wire bar casting technologies. It describes the basic principles of continuous casting, including key features like using rotating drums or belts to form a mould for molten aluminium. It discusses different types of casters like twin drum casters, single drum casters, and those using belts or blocks. It also addresses properties of continuously cast products and their behavior in further processing like rolling. The document aims to give readers an understanding of the possibilities and limitations of continuous casting aluminium.
Drive Power and Torque in Paper Machine DryersKadant Inc.
basic parameter in the design of a paper machine dryer drive system, whether it has an open gear, enclosed gear, or felt drive, is the drive power requirement. Previous work on the drive power for paper machine dryers covered a 1.5 meter diameter cylinder. This paper presents the results for both 1.5 and 1.83 meter diameter cylinders with and without dryer bars.
Dryer doctors have a number of purposes in a paper machine dryer section: sheet shedding, dryer surface cleaning, threading, and air handling and control. Paper dryer doctors are often overlooked in the papermaking process, but they need proper attention to maintain efficient dryer operation.
Effectiveness of Paper Dryer Journal Insulating SleevesKadant Inc.
The document analyzes the effectiveness of insulating sleeves used in paper dryers. Thermal analysis and experimental testing show that insulating sleeves significantly reduce the temperature of dryer journals and the rate of temperature change during startup and operation. This protection helps prevent bearing failures caused by differential thermal expansion between the journal and bearing. Testing confirms that a properly sealed insulating sleeve reduces heat transfer to the bearing from around 3 kW to 1 kW, helping to maintain proper oil viscosity and lubrication.
The document provides information about Group C's project on LD-2 & Slab Caster. It discusses the three main units - Primary Steel Making (PSM), Secondary Steel Making (SSM), and Slab Caster. PSM involves processes like hot metal charging, oxygen blowing, and tapping. SSM includes processes like sampling, purging, and desulphurization. The Slab Caster continuously casts molten iron into slabs using a mould, ram, and section cooling before slabs are cut and marked. Safety guidelines for working in the area are also provided.
This document provides an overview of wellhead systems and products from WOM Wellhead Products. It describes casing heads, casing head spools, tubing head spools, secondary seal pack offs, casing hangers, tubing hangers, tubing head adapters, compact wellhead systems, multi-completion wellhead systems, and contact information for WOM. The document contains specifications, features, and benefits for each type of wellhead component.
Basics of Self-Supported Rotary Joint Installation on Steam-Heated Paper DryersKadant Inc.
Long service life of rotary joints and adjacent flexible hoses can be achieved by following basic installation guidelines. This is particularly important with self-supported rotary pressure joints that are used for paper dryers. General installation guidelines are provided.
Dryer Surface Temperature Response CharacteristicsKadant Inc.
This paper reviews data on thermal response of a dryer cylinder to changes in heat load (sheet break simulation) and to changes in dryer steam pressures. It also shows the improvements that are possible with the application of Turbulator® bars and advanced dryer section control.
This document provides information on the Franklin DuraSeal plug valve. It describes the valve as having an improved design from previous models with a more durable body and reliable stem seal. The valve seals mechanically without needing sealant and can be easily automated. Parts are interchangeable with previous models and it can be repaired in the field without special tools by removing parts from the top or bottom.
Understanding Paper Dryer Rotary Joint ReliabilityKadant Inc.
In the papermaking process, paper is dried on rotating, steam-heated, cast iron drying cylinders. Steam is supplied to each of these drying cylinders through a rotary joint and the steam that has condensed inside the dryers is removed by a syphon system that extends out through either the same rotary joint or a rotary joint on the other dryer journal.
The document provides information on various wellbore equipment manufactured by Parveen including:
- Measuring line stuffing boxes that seal around wirelines and incorporate a blow out plug for safety.
- Line wipers used to wipe wirelines when removed from wells.
- Grease injection control heads that inject grease to create a seal around braided lines.
- Lubricator risers that allow wirelines to be raised above wellhead valves.
- Blowout preventers available in manual or hydraulic models in various configurations to provide protection during wireline operations.
Expansion joints are assemblies designed to absorb vibrations and dimensional changes in pipelines, ducts, and vessels caused by thermal expansion or contraction. They contain bellows that flex to accommodate thermal movements. There are various types of expansion joints that differ in their ability to absorb axial, lateral, and angular movements and withstand pressure thrust forces. Tied and hinged expansion joints contain pressure thrust with tie rods or hinges, while untied joints require external anchoring. Selection of the proper expansion joint depends on the application's movement and pressure requirements.
The document provides information on various centrifugal pump models from different manufacturers, including their key features and specifications. It summarizes 14 pump models ranging from general duty centrifugal pumps to specialized pumps for industries like chemical, food processing, and oil and gas. The pumps listed are suitable for applications handling abrasive liquids, corrosive chemicals, and solids. Materials of construction include cast iron, stainless steel, plastic, and exotic alloys. Drive types include mechanical seals, magnetic drives, and canned motors.
SourceOne is a leading provider of hose and fitting solutions. They offer industrial rubber hoses, hydraulic hoses, stainless steel corrugated hoses, and end fittings for rubber, hydraulic, and stainless steel hoses. SourceOne works with manufacturing partners to deliver high-quality, durable products to customers worldwide. They also provide services like quality control, price negotiation, and product monitoring to support customers.
Tension hooks for use in component testing, often used individually in conjunction with other gripping devices. Variations of the hook profile are available to suit the component under test as well as a self-aligning option.
Web: www.TiniusOlsen.com
Contact Us: info@TiniusOlsen.com
U.S. Bellows, Inc. manufactures a wide variety of engineered expansion joints for industries such as power generation, chemical processing, and shipbuilding. It was formed through the acquisition of two expansion joint companies and has over 450,000 square feet of manufacturing space near the port of Houston. U.S. Bellows uses computer modeling and rigorous testing to design and produce custom expansion joints from thin metal bellows to thick fabric designs using processes like roll forming, hydroforming, and welding.
Single-felt dryer sections are used to enhance the runnability of high-speed paper machines. In single-felt dryer sections, the web is supported by the dryer felt (i.e., fabric) in the draws between dryers. Fabric style, air handling equipment, and runnability devices are critical to efficient operation. Steam control in bottom single-felt dryers is also important.
Nylon bearings offer excellent load bearing capacity, corrosion resistance, and are lightweight compared to steel. Proper bearing design requires considering the operating environment including temperature and moisture, as well as calculating the necessary press fit, running clearance by accounting for shaft allowance, temperature and moisture factors, and ensuring the bearing size can withstand the load and surface speed. Questions about the bearing design process are welcome.
This document summarizes shaking incubators from SHEL LAB, including two benchtop models - the SSI2 Mini Shaker and the larger SSI3 Compact Bench Model. It provides details on their specifications, features, and capacity for holding various flasks and test tubes. Both models offer adjustable temperature and orbital shaking controls and alarms, with the SSI3 having additional adjustable orbit and counterbalance capabilities.
This document is a presentation from US Bellows about expansion joint basics. It contains information about US Bellows' facilities and certifications. It also provides details on bellows movement and motion, types of expansion joints, bellows fabrication, testing procedures, and applications for expansion joints. The presentation aims to educate attendees on fundamental expansion joint topics.
Basic Screw Geometry: Things Your Extruder Screw Designer Never Told You Abou...R&B Plastics Machinery
This document provides an overview of basic screw geometry for single screw extruders. It defines key terms like flighted length, screw diameter, and L/D ratio. It describes the different sections of the screw - feed, transition, and metering - and factors that influence their design like material properties, length, and compression ratio calculations. The document also discusses two-stage vented screw designs and how to calculate compression ratios and pumping capacities for different screw configurations.
The document discusses aircraft hoses. It defines hoses and their uses in aircraft fluid systems. Hoses are classified into two groups: Group A for fuel, oil, pneumatic and hydraulic pressure hoses and Group B for other hoses like hydraulic return lines. The document discusses hose materials, construction, identification, storage, installation, and service lives. Hoses have shelf lives of 10 years and service lives of 4-6 years for Group A hoses and 6-8 years for Group B hoses.
U.S. Bellows is a manufacturer of metallic and fabric expansion joints located in Houston, Texas. They have over 450,000 square feet of manufacturing space and 800 years of combined experience among their staff. U.S. Bellows produces a wide variety of expansion joints from 2 to 138 inches in diameter out of materials like stainless steel, Monel, and Hastelloy to withstand high temperatures and corrosion. They provide expansion joints, technical support, and custom engineering solutions to industries worldwide.
Denison vane pumps are pumps specifically designed for high/low circuit. Visit hydraulicmotorpump.com to buy a Denison vane pump for your next hydraulic project.
The document provides information about Group C's project on LD-2 & Slab Caster. It discusses the three main units - Primary Steel Making (PSM), Secondary Steel Making (SSM), and Slab Caster. PSM involves processes like hot metal charging, oxygen blowing, and tapping. SSM includes processes like sampling, purging, and desulphurization. The Slab Caster continuously casts molten iron into slabs using a mould, ram, and section cooling before slabs are cut and marked. Safety guidelines for working in the area are also provided.
This document provides an overview of wellhead systems and products from WOM Wellhead Products. It describes casing heads, casing head spools, tubing head spools, secondary seal pack offs, casing hangers, tubing hangers, tubing head adapters, compact wellhead systems, multi-completion wellhead systems, and contact information for WOM. The document contains specifications, features, and benefits for each type of wellhead component.
Basics of Self-Supported Rotary Joint Installation on Steam-Heated Paper DryersKadant Inc.
Long service life of rotary joints and adjacent flexible hoses can be achieved by following basic installation guidelines. This is particularly important with self-supported rotary pressure joints that are used for paper dryers. General installation guidelines are provided.
Dryer Surface Temperature Response CharacteristicsKadant Inc.
This paper reviews data on thermal response of a dryer cylinder to changes in heat load (sheet break simulation) and to changes in dryer steam pressures. It also shows the improvements that are possible with the application of Turbulator® bars and advanced dryer section control.
This document provides information on the Franklin DuraSeal plug valve. It describes the valve as having an improved design from previous models with a more durable body and reliable stem seal. The valve seals mechanically without needing sealant and can be easily automated. Parts are interchangeable with previous models and it can be repaired in the field without special tools by removing parts from the top or bottom.
Understanding Paper Dryer Rotary Joint ReliabilityKadant Inc.
In the papermaking process, paper is dried on rotating, steam-heated, cast iron drying cylinders. Steam is supplied to each of these drying cylinders through a rotary joint and the steam that has condensed inside the dryers is removed by a syphon system that extends out through either the same rotary joint or a rotary joint on the other dryer journal.
The document provides information on various wellbore equipment manufactured by Parveen including:
- Measuring line stuffing boxes that seal around wirelines and incorporate a blow out plug for safety.
- Line wipers used to wipe wirelines when removed from wells.
- Grease injection control heads that inject grease to create a seal around braided lines.
- Lubricator risers that allow wirelines to be raised above wellhead valves.
- Blowout preventers available in manual or hydraulic models in various configurations to provide protection during wireline operations.
Expansion joints are assemblies designed to absorb vibrations and dimensional changes in pipelines, ducts, and vessels caused by thermal expansion or contraction. They contain bellows that flex to accommodate thermal movements. There are various types of expansion joints that differ in their ability to absorb axial, lateral, and angular movements and withstand pressure thrust forces. Tied and hinged expansion joints contain pressure thrust with tie rods or hinges, while untied joints require external anchoring. Selection of the proper expansion joint depends on the application's movement and pressure requirements.
The document provides information on various centrifugal pump models from different manufacturers, including their key features and specifications. It summarizes 14 pump models ranging from general duty centrifugal pumps to specialized pumps for industries like chemical, food processing, and oil and gas. The pumps listed are suitable for applications handling abrasive liquids, corrosive chemicals, and solids. Materials of construction include cast iron, stainless steel, plastic, and exotic alloys. Drive types include mechanical seals, magnetic drives, and canned motors.
SourceOne is a leading provider of hose and fitting solutions. They offer industrial rubber hoses, hydraulic hoses, stainless steel corrugated hoses, and end fittings for rubber, hydraulic, and stainless steel hoses. SourceOne works with manufacturing partners to deliver high-quality, durable products to customers worldwide. They also provide services like quality control, price negotiation, and product monitoring to support customers.
Tension hooks for use in component testing, often used individually in conjunction with other gripping devices. Variations of the hook profile are available to suit the component under test as well as a self-aligning option.
Web: www.TiniusOlsen.com
Contact Us: info@TiniusOlsen.com
U.S. Bellows, Inc. manufactures a wide variety of engineered expansion joints for industries such as power generation, chemical processing, and shipbuilding. It was formed through the acquisition of two expansion joint companies and has over 450,000 square feet of manufacturing space near the port of Houston. U.S. Bellows uses computer modeling and rigorous testing to design and produce custom expansion joints from thin metal bellows to thick fabric designs using processes like roll forming, hydroforming, and welding.
Single-felt dryer sections are used to enhance the runnability of high-speed paper machines. In single-felt dryer sections, the web is supported by the dryer felt (i.e., fabric) in the draws between dryers. Fabric style, air handling equipment, and runnability devices are critical to efficient operation. Steam control in bottom single-felt dryers is also important.
Nylon bearings offer excellent load bearing capacity, corrosion resistance, and are lightweight compared to steel. Proper bearing design requires considering the operating environment including temperature and moisture, as well as calculating the necessary press fit, running clearance by accounting for shaft allowance, temperature and moisture factors, and ensuring the bearing size can withstand the load and surface speed. Questions about the bearing design process are welcome.
This document summarizes shaking incubators from SHEL LAB, including two benchtop models - the SSI2 Mini Shaker and the larger SSI3 Compact Bench Model. It provides details on their specifications, features, and capacity for holding various flasks and test tubes. Both models offer adjustable temperature and orbital shaking controls and alarms, with the SSI3 having additional adjustable orbit and counterbalance capabilities.
This document is a presentation from US Bellows about expansion joint basics. It contains information about US Bellows' facilities and certifications. It also provides details on bellows movement and motion, types of expansion joints, bellows fabrication, testing procedures, and applications for expansion joints. The presentation aims to educate attendees on fundamental expansion joint topics.
Basic Screw Geometry: Things Your Extruder Screw Designer Never Told You Abou...R&B Plastics Machinery
This document provides an overview of basic screw geometry for single screw extruders. It defines key terms like flighted length, screw diameter, and L/D ratio. It describes the different sections of the screw - feed, transition, and metering - and factors that influence their design like material properties, length, and compression ratio calculations. The document also discusses two-stage vented screw designs and how to calculate compression ratios and pumping capacities for different screw configurations.
The document discusses aircraft hoses. It defines hoses and their uses in aircraft fluid systems. Hoses are classified into two groups: Group A for fuel, oil, pneumatic and hydraulic pressure hoses and Group B for other hoses like hydraulic return lines. The document discusses hose materials, construction, identification, storage, installation, and service lives. Hoses have shelf lives of 10 years and service lives of 4-6 years for Group A hoses and 6-8 years for Group B hoses.
U.S. Bellows is a manufacturer of metallic and fabric expansion joints located in Houston, Texas. They have over 450,000 square feet of manufacturing space and 800 years of combined experience among their staff. U.S. Bellows produces a wide variety of expansion joints from 2 to 138 inches in diameter out of materials like stainless steel, Monel, and Hastelloy to withstand high temperatures and corrosion. They provide expansion joints, technical support, and custom engineering solutions to industries worldwide.
Denison vane pumps are pumps specifically designed for high/low circuit. Visit hydraulicmotorpump.com to buy a Denison vane pump for your next hydraulic project.
Positive displacement pumps work by trapping a fixed amount of fluid and forcing it into the discharge pipe. There are several types of positive displacement pumps including reciprocating pumps that use pistons or diaphragms, and rotary pumps that use gears, screws, lobes or vanes. Positive displacement pumps must have safety valves and not be operated against closed discharge valves, as they will continually produce flow and increase pressure until damage occurs.
The industrial lobe pump series from Viking Pump can handle shear-sensitive fluids, low- to very-high viscosity fluids, corrosive chemicals, hard-to-seal fluids, and operate at medium- to high-pressures. It has a capacity up to 820 GPM, can operate up to 400 PSI and with viscosities up to 2,000,000 SSU. It is suitable for applications in industries such as paper coatings, automotive paint, polymers and chemicals.
This PowerPoint presentation summarizes a final year project on the design, installation, and fabrication of a reciprocating pump. It was created by Sourav Jana for their mechanical engineering department at Future Institute of Engineering and Management in Kolkata, India, under the guidance of Dr. Manoj Kumar Barai. The presentation acknowledges the support of the institute and guide. It then provides an overview of the project objectives to create a low-cost, user-friendly, manually driven reciprocating pump that is efficient and easy to move. The presentation describes the key parts, dimensions, assembly, working, applications, and includes calculations of the pump's discharge volume.
The document discusses the specifications and maintenance of a rotary vane steering gear system. It describes issues like wear on the cylindrical body and seals that can cause hunting behavior. Regular maintenance including changing oil filters and stuffing glands yearly and overhauling the entire system every 2 years is recommended. While compact and using less oil than alternatives, rotary vane systems have lower reliability due to greater wear on sealing surfaces and difficulty diagnosing vane failures.
This document summarizes a presentation on the design and analysis of a reciprocating pump. It includes a timeline of the project tasks that have been completed, such as market surveys, material selection, and progress reports. It also discusses the dimensions and drafting of pump components in SolidWorks. Finally, it notes that CFD analysis software will be used to model fluid flow, turbulence, heat transfer, and reactions for optimizing the pump performance.
A hydraulic ram, or hydram, is a cyclic water pump powered by hydropower. It takes in water at one "hydraulic head" (pressure) and flow rate, and outputs water at a higher hydraulic head and lower flow rate. The device uses the water hammer effect to develop pressure that allows a portion of the input water that powers the pump to be lifted to a point higher than where the water originally started. The hydraulic ram is sometimes used in remote areas, where there is both a source of low-head hydropower and a need for pumping water to a destination higher in elevation than the source. In this situation, the ram is often useful, since it requires no outside source of power other than the kinetic energy of flowing water.
Reciprocating pumps are positive displacement pumps that use a reciprocating motion of a piston inside a cylinder to pump liquids. They are being replaced by centrifugal pumps for most industrial uses due to their higher initial and maintenance costs. Small hand pumps still use reciprocating pumps where high heads are required with small discharge volumes, such as in oil drilling operations. The main components include a piston, cylinder, connecting rod, crank, suction pipe, delivery pipe, and non-return valves.
1. A rotary vane pump uses a rotor with slots that hold sliding vanes to trap and move liquid through rotation in a cam housing.
2. As the rotor turns eccentrically in the cam, the vanes slide out to push liquid into pockets then compress it out of discharge ports.
3. Rotary vane pumps are efficient for low viscosity liquids and can handle moderate pressures but wear over time and are not suitable for high viscosity liquids or abrasives.
Gear pumps use meshing gears to pump fluids through displacement. There are two main types: external gear pumps which use two external spur gears, and internal gear pumps which use one external and one internal spur gear. Gear pumps are positive displacement pumps that pump a constant volume of fluid per revolution. External gear pumps are commonly used for lubrication and fuel transfer and internal gear pumps can handle high viscosity fluids like asphalt or chocolate. Both have advantages like precision and constant output, but also limitations like fixed flow rates and moderate pressure ranges.
This document discusses different types of hydraulic pumps, including their basic operating principles and comparisons. It provides equations to calculate pump parameters such as theoretical flow rate, volumetric displacement, efficiency, and torque. For example, it defines that positive displacement pumps capture and transfer fixed amounts of fluid, while centrifugal pumps impart velocity to fluid to create pressure. Gear pump displacement can be calculated based on gear dimensions. Pump efficiency is affected by factors like leakage and viscosity.
This document discusses gear pumps, including their operation, types, maintenance, and uses. It begins by defining pumps as devices that add energy to fluids to move them from one point to another. It then explains that gear pumps are a type of rotary, positive displacement pump that uses meshing gears to pump liquids. The document describes how gear pumps work by trapping liquid between gear teeth and casing as the gears rotate. It also discusses gear pump components, maintenance like checking clearances and changing seals, the use of relief valves for safety, and applications like pumping fuels and lubricants.
This document provides an introduction to different types of pumping equipment, including their principles of operation and categories. It discusses the main differences between rotodynamic pumps (like centrifugal pumps) and positive displacement pumps (like reciprocating and rotary pumps). Centrifugal pumps are best for medium to high flow rates and low to medium pressures, while positive displacement pumps can achieve very high pressures or handle low flows. The document also compares characteristics like flow patterns, pressure capabilities, cost considerations, and fluid handling for different pump categories.
the presentation includes basic ideas about water pumps, various terminology generally used for the pumps, classification of pumps and ideas about the types its construction and working
A hydraulic ram is a simple water pump powered by hydropower that takes water at one pressure and flow rate and outputs it at a higher pressure and lower flow rate. It has two moving parts - a waste valve and delivery check valve. Water flows through an inlet drive pipe until it closes the waste valve, creating pressure to open the delivery check valve and pump some water to the outlet delivery pipe at a higher elevation than the source. The pressure vessel cushions pressure fluctuations and improves efficiency. Properly designed, a hydraulic ram can pump water with 60-80% efficiency using only the force of flowing water.
This document provides specifications and information on positive displacement pumps and oil-free gas compressors manufactured by Blackmer for liquid carbon dioxide applications. It describes the key design features of Blackmer pumps that allow them to efficiently handle dry, non-lubricating CO2 at sub-zero temperatures, including replaceable liners and end discs, mechanical seals, and self-adjusting vanes. Performance curves and specifications are provided for various pump and compressor models with capacities ranging from 5 to 300 gallons per minute and 4 to 63 cubic feet per minute, respectively.
Wareender Sealless Magnetic Drive Pumps Overviewwarrenderltd
This document provides an overview of Warrender's mag-drive pump range, including centrifugal, turbine, and rotary pump designs made of alloy and non-metallic materials. The company aims to provide environmentally friendly pumping solutions. The pumps feature magnetic drive couplings for zero emissions and maximum safety. Three pump designs - centrifugal, turbine, and rotary - provide complete hydraulic coverage for applications such as corrosive chemicals and demanding alloy services.
This document provides information about heavy duty slurry pumps from Natus Mining Solutions, including:
- Pumps are available with rubber or metal linings to handle abrasive and corrosive slurries.
- Features include ultra-heavy duty construction, hard metal or elastomer linings, and innovative design.
- It describes the pump components like the shaft, impeller, sealing options, and materials used.
- Technical specifications and performance data are provided for various pump models.
مضخات السحب الطرفية - أحادية المراحل LSB
تتميز المضخة بجسم قوى مغلق ومحكم لتحمل أحمال الأنابيب و هى مناسبة للعديد من السوائل مثل المياه النظيفة, قليلة التلوث, الزيوت الباردة و الساخنة, المياه المحلاة و المكثفة, المحاليل الملحية, الأحماض و المواد الحارقة كذلك تعمل بالعديد من التطبيقات مثل التطبيقات الصناعية, الأغذية و المشروبات, أنظمة الدهانات و الفلترة
http://rheoserve.com/ind_single_stage_pumps.html
The document discusses Barnes Engineered Pressure Sewer systems. It provides details on their grinder pumps, basin options, level control options, control panel options, and accessories. The grinder pumps come in a variety of horsepower sizes and configurations. The basins are available as fiberglass or with c-channel rails in various diameters and lengths. Level control options include the Environmentally Sealed Pressure Switch and float trees. Control panels include Stealth panels in simplex and duplex configurations. A range of accessories such as flexible piping, valves, and remote alarms are also available.
We at Cosmos Pumps are on a mission to be the number one choice for all dewatering needs across the globe. And we are fulfilling this need by manufacturing state of the art dewatering pumps and providing top-notch sales, rental and turnkey services of dewatering pumps all over.
With its wide range of 4” to 12”
borehole pumps offer advanced
water supply solutions for residential,
municipal, irrigation and industrial
applications.
This document provides information on mechanical diaphragm metering pumps from OBL, including:
- Models comply with ATEX standards for use in hazardous areas.
- Pump heads, valves, and seats are available in various corrosion-resistant materials like PVDF, PTFE, and Hastelloy to handle different chemicals.
- Pumps have spring-return mechanisms, large locking screws, and aluminum casings for long life and low maintenance.
This document provides information on various types of hose reels for industrial use. It describes the benefits of hose reels for organizing hoses and reducing trip hazards. It then provides specifications for different models of retractable spring rewind hose reels made of polypropylene, powder coated steel, and stainless steel. These reels come in a range of sizes to accommodate various hose diameters and lengths for applications like compressed air, water, chemicals and more. The document also includes specifications for static cable and hose reels.
This document provides information about various high-pressure cleaning products made by Kränzle in Germany. It describes several portable cold water high-pressure cleaners that are compact, lightweight, and suitable for continuous professional use. Models include the HD 7/122 and HD 10/122. It also provides specifications and features of other Kränzle products like the K 1132 small power pack and the K 2000 and Profi series of more powerful cleaners. The document includes ordering numbers, pressure ratings, water outputs, and standard equipment for different models.
PEC's MPT series high pressure Triplex Plunger Pumps. Generally used for Car Washer, Reverse Osmosis, Chemical Injection, Boilers Feed Service, Hydraulic Testing, Cleaning of heat exchangers, Boilers, Towers, Chemical Vassels and Shop Floors under high pressure.
Capacity UP TO 300 M3/hr.
Pressure UP TO 1000 Kg/Cm2.
Siemens offers a full range of pre-designed turbocompressors from 600 to 600,000 cubic meters per hour for industries such as oil and gas, chemicals, and metals. Their product line includes single-stage compressors and blowers with separate or integrated gearboxes that can be matched with steam turbines or electric drivers. Siemens has over 100 years of experience in turbomachinery and has installed over 4,000 compressors and blowers worldwide.
This document provides information on the NP series of sliding vane positive displacement pumps from Blackmer. It summarizes the key features and benefits of the NP pumps, including their versatility in handling various fluids, high efficiency which saves on energy costs, ability to run dry or self-prime, suitability for high viscosity fluids, long bearing life from lubrication system, and options for materials, seals, ports and flanges. It also provides specifications on flow rates, speeds, pressures and temperatures the pumps can handle for different models. Dimensional drawings and performance curves are included.
This document provides information on Grundfos submersible pumps and motors for various applications. It includes a performance range chart, applications overview, material specifications, features and benefits, and technical data. The document contains pump and motor selection information, performance curves, installation and operating guidelines to help users choose the appropriate submersible pump for their needs.
This document provides specifications for WKM 370D6 trunnion-mounted ball valves for general petroleum and chemical applications. It includes details on:
- Available sizes from 2 to 16 inches and ASME pressure classes from 150 to 5000 psi.
- Features such as bidirectional flow, double block and bleed operation, and fire testing compliance.
- Standard materials for bodies, trim components, and seals suitable for temperatures from -50 to 400°F.
- Dimensional drawings and part number coding information to specify valves.
This brochure illustrate M PUMPS production range for industrial applications. Metallic and non metallic pumps, from small dosing sliding vane pumps, to big overhung and between bearing heavy duty pumps. All these products are 100% made in M PUMPS.
This document provides information on metal bellows vacuum pumps and compressors from OTSPumps&Compressors. It includes specifications for various models ranging from small portable pumps to larger industrial units. Application examples are given such as gas analysis, nuclear monitoring, semiconductor processing. The pumps share features like stainless steel construction, hermetic sealing, and maintenance-free operation. Customization is also offered for special requirements.
This document summarizes the features and specifications of the H994 Series high pressure bronze close coupled rotary gear pumps. Key points include:
- The pumps use bronze and stainless steel components, silicon carbide bearings, and have a 300 PSI pressure capacity.
- They are suitable for water, oil, and mild chemicals between pH 4-11, and have temperature limits depending on the mechanical seal used.
- Dimensions and adapter kits are provided to mount the pumps to common electric motor frames.
- Exploded diagrams and parts lists detail the internal components.
Similar to Catálogo Bombas Blackmer _ SX3 Series (20)
1) O documento discute o uso de bombas de fusos na indústria de petróleo e gás, especificamente para transporte de petróleo cru, água e fluidos multifásicos.
2) Bombas Leistritz são usadas globalmente nesta indústria, operando em diversas aplicações como FPSOs, oleodutos e refinarias.
3) O documento fornece detalhes sobre projetos específicos onde bombas Leistritz são usadas, incluindo um campo de petróleo na Argélia.
O documento descreve a bomba dosadora EXCEL XR da LMI, projetada para fornecer precisão e confiabilidade no controle químico de processos. A bomba possui recursos avançados de interface e controle, além de ser flexível para diferentes aplicações industriais e de tratamento de água. A LMI oferece suporte global para garantir o desempenho e longevidade da bomba.
Este documento fornece instruções sobre instalação, calibração e manutenção de bombas dosadoras. Ele discute características dos modelos, especificações técnicas, instalação correta, procedimentos de calibração, solução de problemas comuns e substituição periódica de peças como válvulas, diafragmas e selos.
A VIBROPAC busca ampliar sua gama de produtos com a bomba dosadora P+, que irá atender necessidades de dosagem química em tratamento de água, torres de resfriamento e caldeiras, entre outros. A P+ possui design robusto, indicador de operação, é compacta e ideal para aplicações OEM, com vantagens como válvula dupla e diferentes modelos de acionamento e cabeçotes. A VIBROPAC oferece serviços de instalação, comissionamento, treinamento e manutenção para bombas dosadoras P+.
Este documento fornece um resumo da empresa Vibropac, que oferece sistemas de bombeamento, tratamento de fluidos e preparação de polímeros. A empresa possui duas unidades de negócios focadas em óleo e gás e águas e efluentes, fornecendo uma variedade de equipamentos como bombas, compressores, preparadores de polímero e sistemas de tratamento de água.
The document summarizes Primeroyal metering pumps from Milton Roy. It describes how the pumps are designed with modular frames and liquid ends to meet a variety of application needs. Key features highlighted include variable eccentric gear mechanisms for precise flow control, multiple liquid end options for different pressure and chemical requirements, and modular configurations that allow for simplex, duplex or triplex pump arrangements. The document also lists typical industries and chemicals the pumps are used for.
EKATO FLUID manufactures custom-built industrial agitators with short lead times and competitive prices. Their agitators are available with shaft diameters ranging from 25mm to 100mm and impeller diameters from 125mm to 2500mm. All wetted parts are stainless steel 316Ti and agitators can operate at pressures up to 7 bar and temperatures up to 200°C. EKATO FLUID ensures maximum safety through ATEX certification and quality management certified to DIN ISO 9001.
This document provides information on the Flexiprene 4-Function Valve including its functions of anti-syphon, back pressure, priming/pressure release, and pressure relief. It describes the materials of construction, part numbers, and includes an instruction sheet on priming the pump and depressurizing the discharge line.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEMHODECEDSIET
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
The Python for beginners. This is an advance computer language.
Catálogo Bombas Blackmer _ SX3 Series
1. SX3 Series
Stainless Steel Vane Pump for Corrosive, Thin Liquid Process
Applications at High Capacities
Spec Sheet 104-002
Section: 104
Effective: September 2012
Replaces: September 2006
n 3-inch ported pump
n Capacity to 250 gpm (56 m3
/hr)
n Pressure to 125 psi (8.6 bar)
n Viscosity 30 to 20,000 ssu
(1 to 4,250 cSt)
n Temperature to 240°F (115°C)
2. SX3 Series Stainless Steel Sliding Vane Pumps for Process Applications
The Sliding Vane Advantage:
High-Performance, Sustained Efficiency
Due to its self-adjusting nature, and the close tolerances of the sliding vanes,
sliding vane technology maintains the highest level of performance and
efficiency over any other pump technology to deliver unparalleled lifetime
reliability and flow performance.
The Blackmer SX3 Series Stainless Steel
Pump Advantage
The Leading Authority in Vane
Pump Design
For more than 100 years, Blackmer vane pumps have set the
industry standard for the transfer of thin liquids in a broad range
of process applications, including corrosive and non-corrosive
chemicals, solvents, sulfates, vegetable oils, urea and many acids.
With more than a century of vane technology experience, Blackmer
is the leading authority on vane technology design and construction.
We know that efficiency and high performance is attained through
experienced pump design with a complete understanding of the
bearing environment – which is why every Blackmer vane pump
design begins with field-proven designs, materials of construction
and with the bearings and seals in mind – the most common failure
points for other PD pumps.
Field-Proven Reliability and Performance
The Blackmer SX3 Stainless Steel Process Vane Pump is built around
the design of the popular STX3, the most specified chemical
transport pump in the world. With a field-proven track record for
high volumetric performance and reliability as its foundation, the
SX3 ensures long, trouble-free operation and high efficiency in
process applications.
High-Capacity Performance
For unbeatable durability, reliability and the lowest overall cost of
ownership, the Blackmer SX3 Series Stainless Steel Process Vane
Pump is the ideal pump for high-capacity process applications
between 100 and 250 gpm (22 and 56 m3
/h). Designed for a wide
range of chemical applications and compatibility, the SX3 features
Duravanes® and external ball bearings protected by chemical
mechanical seals with PTFE elastomers. The pump’s performance
offers low shear, non-pulsing flow and pressure capabilities to 125 psi
(8.6 bar) with superior vacuum capabilities for self-priming, loading/
unloading and line stripping applications.
Available Models and Sizes
In addition to the SX3, Blackmer offers the STX3, STX2, and STX1220
Stainless Steel Mechanical Seal pumps all fitted with double-ended
drive shafts – see Bulletin 203-001. All of these pumps are also
available for DEF service – see Bulletin 203-003.
How Blackmer’s sliding vane action works
3. Construction Constructed of 316 stainless steel, SX3 pumps are specifically
engineered for low and medium viscosity process applications where reliable,
continuous duty operation with no preventative maintenance is desired. SX3 pumps are ideal for
handling shear-sensitive liquids at high speeds with no product degradation.
New
Vane
Worn
Vane
Vane compensates for wear by
sliding further out of rotor slot
blackOPS®: Blackmer Optimum Pump Solutions – blackOPS® is a selection software program created
specifically for Blackmer’s positive displacement pumps and System One® centrifugal pumps. The
program allows you to print (or save) your pump selection data and pump curves in a PDF format.
For additional information on blackOPS®, log onto www.blackmer.com.
Self-Adjusting Duravanes®
n Long-lasting, nonmetallic composite vanes automatically adjust
clearances and sustain the highest levels of flow performance,
efficiency and reliability over other PD pump technologies
n Eliminate slip, capacity loss, and downtime for clearance
adjustments due to worn metal parts common with other
pump types
n Offer exceptional suction and dry priming capability
n Ideal for handling shear-sensitive liquids at higher speeds
n Can run dry for short periods
n Quick and easy to replace seals and service parts
when required
How Blackmer’s sliding vanes self-adjust for wear
Adjustable Bypass Relief Valve
n Protects the pump from excessive
pressure buildup in the event of an
obstructed or closed return line
Blackmer Chemical
Mechanical Seal
n Specially developed for thin
liquids and non-lubricating
liquids, Blackmer’s exclusive
component type design is field-
proven to provide long life for a
wide range of applications
Drains
n Equipped with drain
plugs to allow easy
draining after flushing
External Ball Bearings
n Low-friction, grease-lubricated ball
bearings are isolated from the pumpage
by mechanical seals for trouble-free service
and long life.
Pump Housing
n 316 stainless steel
n Field-proven design based on the STX3,
the most specified chemical transport
pump in the world
Heavy-Duty Shaft
n Capable of clockwise
or counterclockwise
rotation