1. The document provides instructions for disassembling and assembling various components of a 955K track loader engine, including the governor, fuel injection pumps, fuel check valve, and bypass valve.
2. Steps are provided to separate the governor from the fuel injection pump housing, disassemble the governor, remove and install the fuel check valve and bypass valve, remove and install the fuel injection pumps, and disassemble and assemble the fuel injection pumps.
3. Cleaning procedures and special notes are included throughout to ensure correct assembly.
This document provides instructions for disassembling and assembling various components of a 977K Track Loader, including the fuel injection pump housing, governor, and engine. The summary is:
1) The fuel injection pump housing and governor must be removed to access internal components. This involves disconnecting lines, removing mounts, and using tools to ensure the engine is in the correct position.
2) Disassembling the governor housing separates components like springs, pins, and flyweights. The fuel injection pump housing is also disassembled to remove the camshaft and internal levers.
3) Reassembly requires installing components in reverse order, ensuring correct positioning, and using new seals and bolts as specified
This document provides instructions for disassembling and assembling various components of a 977K Track Loader, including the fuel injection pump housing, governor, and engine. The summary is:
1) The fuel injection pump housing and governor must be removed to access internal components. This involves disconnecting lines, removing mounts, and using tools to ensure the engine is in the correct position.
2) Disassembly of the governor involves removing springs, seals, pins, and other small parts. The fuel injection pump housing is disassembled by removing the camshaft, lifters, and control shaft.
3) Reassembly follows the reverse order, taking care to install parts correctly and apply new seals, bol
This document provides instructions for disassembling and assembling various components of a 977K Track Loader, including the fuel injection pump housing, governor, and engine. The summary is:
1) The fuel injection pump housing and governor must be removed to access internal components. This involves disconnecting lines, removing mounts, and using tools to ensure the engine is in the correct position.
2) Disassembling the governor housing separates components like springs, pins, and flyweights. The fuel injection pump housing is also disassembled to remove the camshaft and internal levers.
3) Reassembly requires precisely positioning each part and uses new seals, bolts and tools to apply torque. The process
This document provides instructions for disassembling and assembling various components of a 977K track loader, including the fuel injection pump housing, governor, and engine. The instructions include removing and installing over 50 individual parts in a specific sequence, noting identification numbers, lubrication, and torque specifications where relevant. Key steps include separating the governor from the fuel injection pump housing, removing the fuel injection pumps, camshaft and other internal parts, and correctly reinstalling them while aligning pins, levers and shafts.
This document provides instructions for disassembling and assembling various components of a 977K track loader, including the fuel injection pump housing, governor, and engine. The instructions include removing and installing over 50 individual parts in a specific sequence, noting identification numbers, lubrication, and torque specifications where relevant. Key steps include separating the governor from the fuel injection pump housing, removing the fuel injection pumps, camshaft and other internal parts, and correctly reinstalling them while aligning pins, levers and shafts.
This document provides instructions for disassembling and assembling various components of a 977K track loader, including the fuel injection pump housing, governor, and engine. The instructions include removing and installing over 50 individual parts in a specific sequence, noting identification numbers, lubrication, and torque specifications where relevant. Key steps include separating the governor from the fuel injection pump housing, removing the fuel injection pumps, camshaft and other internal parts, and correctly reinstalling them while aligning pins, levers and shafts.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in the proper order.
- Removing and installing the inlet manifold, which is the part that connects the air cleaner to the cylinder head.
- Removing and installing the aftercooler, which cools the air after it passes through the turbocharger, and involves disconnecting hoses and removing housing pieces.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in the proper order.
- Removing and installing the inlet manifold, which is the part that connects the air cleaner to the cylinder head.
- Removing and installing the aftercooler, which cools the air after it passes through the turbocharger, and involves disconnecting hoses and removing housing pieces.
This document provides instructions for disassembling and assembling various components of a 977K Track Loader, including the fuel injection pump housing, governor, and engine. The summary is:
1) The fuel injection pump housing and governor must be removed to access internal components. This involves disconnecting lines, removing mounts, and using tools to ensure the engine is in the correct position.
2) Disassembling the governor housing separates components like springs, pins, and flyweights. The fuel injection pump housing is also disassembled to remove the camshaft and internal levers.
3) Reassembly requires installing components in reverse order, ensuring correct positioning, and using new seals and bolts as specified
This document provides instructions for disassembling and assembling various components of a 977K Track Loader, including the fuel injection pump housing, governor, and engine. The summary is:
1) The fuel injection pump housing and governor must be removed to access internal components. This involves disconnecting lines, removing mounts, and using tools to ensure the engine is in the correct position.
2) Disassembly of the governor involves removing springs, seals, pins, and other small parts. The fuel injection pump housing is disassembled by removing the camshaft, lifters, and control shaft.
3) Reassembly follows the reverse order, taking care to install parts correctly and apply new seals, bol
This document provides instructions for disassembling and assembling various components of a 977K Track Loader, including the fuel injection pump housing, governor, and engine. The summary is:
1) The fuel injection pump housing and governor must be removed to access internal components. This involves disconnecting lines, removing mounts, and using tools to ensure the engine is in the correct position.
2) Disassembling the governor housing separates components like springs, pins, and flyweights. The fuel injection pump housing is also disassembled to remove the camshaft and internal levers.
3) Reassembly requires precisely positioning each part and uses new seals, bolts and tools to apply torque. The process
This document provides instructions for disassembling and assembling various components of a 977K track loader, including the fuel injection pump housing, governor, and engine. The instructions include removing and installing over 50 individual parts in a specific sequence, noting identification numbers, lubrication, and torque specifications where relevant. Key steps include separating the governor from the fuel injection pump housing, removing the fuel injection pumps, camshaft and other internal parts, and correctly reinstalling them while aligning pins, levers and shafts.
This document provides instructions for disassembling and assembling various components of a 977K track loader, including the fuel injection pump housing, governor, and engine. The instructions include removing and installing over 50 individual parts in a specific sequence, noting identification numbers, lubrication, and torque specifications where relevant. Key steps include separating the governor from the fuel injection pump housing, removing the fuel injection pumps, camshaft and other internal parts, and correctly reinstalling them while aligning pins, levers and shafts.
This document provides instructions for disassembling and assembling various components of a 977K track loader, including the fuel injection pump housing, governor, and engine. The instructions include removing and installing over 50 individual parts in a specific sequence, noting identification numbers, lubrication, and torque specifications where relevant. Key steps include separating the governor from the fuel injection pump housing, removing the fuel injection pumps, camshaft and other internal parts, and correctly reinstalling them while aligning pins, levers and shafts.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in the proper order.
- Removing and installing the inlet manifold, which is the part that connects the air cleaner to the cylinder head.
- Removing and installing the aftercooler, which cools the air after it passes through the turbocharger, and involves disconnecting hoses and removing housing pieces.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in the proper order.
- Removing and installing the inlet manifold, which is the part that connects the air cleaner to the cylinder head.
- Removing and installing the aftercooler, which cools the air after it passes through the turbocharger, and involves disconnecting hoses and removing housing pieces.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model engine. The document describes how to disassemble and assemble the fuel injection pump housing, which includes removing pumps, gears, and other internal components. It also provides instructions for removing and installing the inlet manifold and aftercooler. The steps provided are detailed and include images to illustrate the proper procedures.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...f8usjejkdmmd
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model engine. The document describes how to disassemble and assemble the fuel injection pump housing, which includes removing pumps, gears, and other internal components. It also provides instructions for removing and installing the inlet manifold and aftercooler. The steps provided are detailed and include images to illustrate the proper procedures.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model engine. The document describes how to disassemble and assemble the fuel injection pump housing, which includes removing pumps, gears, and other internal components. It also provides instructions for removing and installing the inlet manifold and aftercooler. The procedures provide detailed steps for servicing these engine systems while ensuring proper identification and replacement of parts.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...fujsked9dikdkd
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in the proper order.
- Removing and installing the inlet manifold, which is the part that connects the air cleaner to the cylinder head.
- Removing and installing the aftercooler, which cools the air after it passes through the turbocharger, and involves disconnecting hoses and removing housing pieces.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...ufjskekdjdmw2
This document provides instructions for servicing components of a 245 Excavator engine, including:
- Disassembling and reassembling the fuel injection pump housing, which involves removing pumps, gears, and bearings, and reinstalling them in the proper order and position.
- Removing and installing the inlet manifold, which connects to the cylinder head and air cleaner components.
- Removing the aftercooler unit, which cools engine air after turbocharging, by disconnecting hoses and removing housing covers, elbows, and the core component.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...gen78guozun
This document provides instructions for servicing components of a 245 Excavator's 3406 vehicular engine, including:
- Disassembling and reassembling the fuel injection pump housing, which involves removing various parts like pumps, racks, lifters, and bearings, and replacing them in the proper order.
- Removing and installing the inlet manifold, which connects to the cylinder head and air cleaner components.
- Removing the aftercooler unit, which involves disconnecting hoses and pipes, removing mounting bolts, and taking out the core component. Detailed steps are provided for each disassembly and reassembly process.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...fjskemmd4r
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in the proper order.
- Removing and installing the inlet manifold, which is the part that connects the air cleaner to the cylinder head.
- Removing and installing the aftercooler, which cools the air after it passes through the turbocharger, and involves disconnecting hoses and removing housing pieces.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...jfkksemmdmd
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in the proper order.
- Removing and installing the inlet manifold, which is the part that connects the air cleaner to the cylinder head.
- Removing and installing the aftercooler, which cools the air after it passes through the turbocharger, and involves disconnecting hoses and removing housing pieces.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in the proper order.
- Removing and installing the inlet manifold, which is the part that connects the air intake to the cylinder head.
- Removing and installing the aftercooler, which cools the air after it passes through the turbocharger, and involves disconnecting hoses and removing housing pieces.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 3406 vehicular engine used in 245 excavators. The document describes how to disassemble and assemble the fuel injection pump housing by removing pumps, gears, and other internal components. It also provides instructions for removing and installing the inlet manifold, aftercooler, and related components. The purpose is to provide technicians with step-by-step guidance for servicing and repairing parts of the fuel system.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 3406 vehicular engine used in 245 excavators. The document describes how to disassemble and assemble the fuel injection pump housing by removing pumps, gears, and other internal components. It also provides instructions for removing and installing the inlet manifold, aftercooler, and related components. The purpose is to repair or replace parts while maintaining proper installation and alignment of components.
This document provides instructions for disassembling and assembling components of a 245 Excavator's 3406 vehicular engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in reverse order.
- Removing the inlet manifold by disconnecting air and fuel lines and removing mounting bolts, and installing it by reversing the removal steps.
- Removing the aftercooler by disconnecting hoses and pipes, removing mounting bolts, and extracting components like the core, housing pieces, and elbows.
This document provides instructions for disassembling and assembling components of a 245 Excavator's 3406 vehicular engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in reverse order.
- Removing the inlet manifold by disconnecting air and fuel lines and removing mounting bolts, and installing it by reversing the removal steps.
- Removing the aftercooler by disconnecting hoses and pipes, removing mounting bolts, and extracting components like the core, housing pieces, and elbows.
The document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine used in a 977L track loader, including:
- Removing and installing the camshaft, following marks to ensure proper timing
- Removing and installing timing gears and plate, using tools to apply torque for proper installation
- Removing the engine and torque converter by disconnecting hoses, wires, and supports, and reinstalling by reversing the process
- Removing and installing the flywheel by loosening bolts, using tools and heat treatment, and reinstalling by reversing the process
The document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine used in a 977L track loader, including:
- Removing and installing the camshaft, following marks to maintain proper timing.
- Removing and installing timing gears and plate, using tools to apply torque and ensure proper alignment.
- Removing the engine and torque converter by disconnecting hoses, wires, and supports, and reinstalling by reversing the process.
- Removing the flywheel by loosening bolts and installing guide bolts, and reinstalling it along with heating and installing the ring gear.
The document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine used in a 977L track loader, including:
- Removing and installing the camshaft, following marks to ensure proper timing
- Removing and installing timing gears and plate, using tools to apply torque for correct installation
- Removing the engine and torque converter by disconnecting hoses, wires, and supports, and reinstalling by reversing the process
- Removing and installing the flywheel by loosening bolts, using tools and heat treatment, and reinstalling by reversing the process
Caterpillar Cat 120 MOTOR GRADER (Prefix 10R) Service Repair Manual Instant D...fujskekkdm8ik
This document provides instructions for disassembling and assembling various components of a 120 Motor Grader's sleeve metering fuel system, including:
1. Removing and installing a speed limiter on the fuel system governor.
2. Separating and reconnecting the governor from the fuel injection pump housing.
3. Disassembling and reassembling the governor.
4. Removing and installing the fuel check valve and bypass valve.
5. An overview of fuel injection pumps and housings.
The document contains detailed step-by-step instructions and notes for working with each component to ensure proper disassembly and reassembly. References are made to other documents for testing, adjusting and
Caterpillar Cat 120 MOTOR GRADER (Prefix 10R) Service Repair Manual Instant D...fiksemdmdme3
The document provides instructions for disassembling and assembling components of the sleeve metering fuel system for a 120 Motor Grader, including the speed limiter, fuel injection pump housing and governor, and fuel check and bypass valves. The instructions describe removing and installing various parts like bolts, springs, diaphragms, bodies, and covers. Readers are directed to other sections for adjusting settings after reassembly.
This document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine, including the governor, fuel transfer pump, fuel check valve, bypass valve, fuel injection pumps, and hood/muffler/precleaner assembly. It describes removing and installing each part in 3 sentences or less, noting key steps like using specific tools, installing parts in their original positions, and ensuring proper orientation of seals and other components.
This document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine, including the governor, fuel transfer pump, fuel check valve, bypass valve, fuel injection pumps, and hood/muffler/precleaner assembly. It lists the specific parts to remove and install for each component, and the order and important notes for the process. Disassembly generally involves removing covers, seals, springs, pins, and internal parts. Reassembly follows the reverse order and notes proper orientation of parts.
Massey Ferguson MF 384 S TRACTOR (- 300993) Parts Catalogue Manual Instant Do...gua6982552kun
This document contains parts listings and technical specifications for the engine of a Massey Ferguson 384 S tractor. It includes 6 pages detailing over 60 individual parts for the engine, including the cylinder block, crankshaft, pistons, cylinder head, rocker shaft, and air induction/exhaust systems. Each part is listed with its part number, quantity used, description, and any replacement or comment information.
Massey Ferguson MF 384 F TRACTOR, - 0894 Parts Catalogue Manual Instant Downl...gua6982552kun
The document is a parts catalog for a Massey Ferguson MF 384 F tractor engine. It lists over 60 individual parts for the engine, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft and other components. Each part is given a reference number, part number, quantity and description, along with any replacement or additional part information.
More Related Content
Similar to Caterpillar Cat 955K TRACK LOADER (Prefix 85J) Service Repair Manual Instant Download (85J00001-04671).pdf
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model engine. The document describes how to disassemble and assemble the fuel injection pump housing, which includes removing pumps, gears, and other internal components. It also provides instructions for removing and installing the inlet manifold and aftercooler. The steps provided are detailed and include images to illustrate the proper procedures.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...f8usjejkdmmd
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model engine. The document describes how to disassemble and assemble the fuel injection pump housing, which includes removing pumps, gears, and other internal components. It also provides instructions for removing and installing the inlet manifold and aftercooler. The steps provided are detailed and include images to illustrate the proper procedures.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model engine. The document describes how to disassemble and assemble the fuel injection pump housing, which includes removing pumps, gears, and other internal components. It also provides instructions for removing and installing the inlet manifold and aftercooler. The procedures provide detailed steps for servicing these engine systems while ensuring proper identification and replacement of parts.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...fujsked9dikdkd
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in the proper order.
- Removing and installing the inlet manifold, which is the part that connects the air cleaner to the cylinder head.
- Removing and installing the aftercooler, which cools the air after it passes through the turbocharger, and involves disconnecting hoses and removing housing pieces.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...ufjskekdjdmw2
This document provides instructions for servicing components of a 245 Excavator engine, including:
- Disassembling and reassembling the fuel injection pump housing, which involves removing pumps, gears, and bearings, and reinstalling them in the proper order and position.
- Removing and installing the inlet manifold, which connects to the cylinder head and air cleaner components.
- Removing the aftercooler unit, which cools engine air after turbocharging, by disconnecting hoses and removing housing covers, elbows, and the core component.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...gen78guozun
This document provides instructions for servicing components of a 245 Excavator's 3406 vehicular engine, including:
- Disassembling and reassembling the fuel injection pump housing, which involves removing various parts like pumps, racks, lifters, and bearings, and replacing them in the proper order.
- Removing and installing the inlet manifold, which connects to the cylinder head and air cleaner components.
- Removing the aftercooler unit, which involves disconnecting hoses and pipes, removing mounting bolts, and taking out the core component. Detailed steps are provided for each disassembly and reassembly process.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...fjskemmd4r
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in the proper order.
- Removing and installing the inlet manifold, which is the part that connects the air cleaner to the cylinder head.
- Removing and installing the aftercooler, which cools the air after it passes through the turbocharger, and involves disconnecting hoses and removing housing pieces.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...jfkksemmdmd
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in the proper order.
- Removing and installing the inlet manifold, which is the part that connects the air cleaner to the cylinder head.
- Removing and installing the aftercooler, which cools the air after it passes through the turbocharger, and involves disconnecting hoses and removing housing pieces.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in the proper order.
- Removing and installing the inlet manifold, which is the part that connects the air intake to the cylinder head.
- Removing and installing the aftercooler, which cools the air after it passes through the turbocharger, and involves disconnecting hoses and removing housing pieces.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 3406 vehicular engine used in 245 excavators. The document describes how to disassemble and assemble the fuel injection pump housing by removing pumps, gears, and other internal components. It also provides instructions for removing and installing the inlet manifold, aftercooler, and related components. The purpose is to provide technicians with step-by-step guidance for servicing and repairing parts of the fuel system.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 3406 vehicular engine used in 245 excavators. The document describes how to disassemble and assemble the fuel injection pump housing by removing pumps, gears, and other internal components. It also provides instructions for removing and installing the inlet manifold, aftercooler, and related components. The purpose is to repair or replace parts while maintaining proper installation and alignment of components.
This document provides instructions for disassembling and assembling components of a 245 Excavator's 3406 vehicular engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in reverse order.
- Removing the inlet manifold by disconnecting air and fuel lines and removing mounting bolts, and installing it by reversing the removal steps.
- Removing the aftercooler by disconnecting hoses and pipes, removing mounting bolts, and extracting components like the core, housing pieces, and elbows.
This document provides instructions for disassembling and assembling components of a 245 Excavator's 3406 vehicular engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components and reassembling them in reverse order.
- Removing the inlet manifold by disconnecting air and fuel lines and removing mounting bolts, and installing it by reversing the removal steps.
- Removing the aftercooler by disconnecting hoses and pipes, removing mounting bolts, and extracting components like the core, housing pieces, and elbows.
The document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine used in a 977L track loader, including:
- Removing and installing the camshaft, following marks to ensure proper timing
- Removing and installing timing gears and plate, using tools to apply torque for proper installation
- Removing the engine and torque converter by disconnecting hoses, wires, and supports, and reinstalling by reversing the process
- Removing and installing the flywheel by loosening bolts, using tools and heat treatment, and reinstalling by reversing the process
The document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine used in a 977L track loader, including:
- Removing and installing the camshaft, following marks to maintain proper timing.
- Removing and installing timing gears and plate, using tools to apply torque and ensure proper alignment.
- Removing the engine and torque converter by disconnecting hoses, wires, and supports, and reinstalling by reversing the process.
- Removing the flywheel by loosening bolts and installing guide bolts, and reinstalling it along with heating and installing the ring gear.
The document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine used in a 977L track loader, including:
- Removing and installing the camshaft, following marks to ensure proper timing
- Removing and installing timing gears and plate, using tools to apply torque for correct installation
- Removing the engine and torque converter by disconnecting hoses, wires, and supports, and reinstalling by reversing the process
- Removing and installing the flywheel by loosening bolts, using tools and heat treatment, and reinstalling by reversing the process
Caterpillar Cat 120 MOTOR GRADER (Prefix 10R) Service Repair Manual Instant D...fujskekkdm8ik
This document provides instructions for disassembling and assembling various components of a 120 Motor Grader's sleeve metering fuel system, including:
1. Removing and installing a speed limiter on the fuel system governor.
2. Separating and reconnecting the governor from the fuel injection pump housing.
3. Disassembling and reassembling the governor.
4. Removing and installing the fuel check valve and bypass valve.
5. An overview of fuel injection pumps and housings.
The document contains detailed step-by-step instructions and notes for working with each component to ensure proper disassembly and reassembly. References are made to other documents for testing, adjusting and
Caterpillar Cat 120 MOTOR GRADER (Prefix 10R) Service Repair Manual Instant D...fiksemdmdme3
The document provides instructions for disassembling and assembling components of the sleeve metering fuel system for a 120 Motor Grader, including the speed limiter, fuel injection pump housing and governor, and fuel check and bypass valves. The instructions describe removing and installing various parts like bolts, springs, diaphragms, bodies, and covers. Readers are directed to other sections for adjusting settings after reassembly.
This document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine, including the governor, fuel transfer pump, fuel check valve, bypass valve, fuel injection pumps, and hood/muffler/precleaner assembly. It describes removing and installing each part in 3 sentences or less, noting key steps like using specific tools, installing parts in their original positions, and ensuring proper orientation of seals and other components.
This document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine, including the governor, fuel transfer pump, fuel check valve, bypass valve, fuel injection pumps, and hood/muffler/precleaner assembly. It lists the specific parts to remove and install for each component, and the order and important notes for the process. Disassembly generally involves removing covers, seals, springs, pins, and internal parts. Reassembly follows the reverse order and notes proper orientation of parts.
Similar to Caterpillar Cat 955K TRACK LOADER (Prefix 85J) Service Repair Manual Instant Download (85J00001-04671).pdf (20)
Massey Ferguson MF 384 S TRACTOR (- 300993) Parts Catalogue Manual Instant Do...gua6982552kun
This document contains parts listings and technical specifications for the engine of a Massey Ferguson 384 S tractor. It includes 6 pages detailing over 60 individual parts for the engine, including the cylinder block, crankshaft, pistons, cylinder head, rocker shaft, and air induction/exhaust systems. Each part is listed with its part number, quantity used, description, and any replacement or comment information.
Massey Ferguson MF 384 F TRACTOR, - 0894 Parts Catalogue Manual Instant Downl...gua6982552kun
The document is a parts catalog for a Massey Ferguson MF 384 F tractor engine. It lists over 60 individual parts for the engine, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft and other components. Each part is given a reference number, part number, quantity and description, along with any replacement or additional part information.
Caterpillar Cat TH460B Telehandler (Prefix SLF) Service Repair Manual Instant...gua6982552kun
This document provides instructions for removing and installing various engine components on a Caterpillar 3054E engine, including the cylinder head, rocker shaft, lifters, and camshaft. The procedures describe cleaning parts, lubricating bolts, and torquing fasteners to the specified values. Special tools may be required and safety precautions are noted regarding containing fluids.
Caterpillar Cat TH350B Telehandler (Prefix SLD) Service Repair Manual Instant...gua6982552kun
This document provides instructions for disassembling and assembling parts of a TELEHANDLER Model TH350B powered by a 3054E engine. The summary includes:
1) Instructions are provided to remove and install the front gear group, housing, valve mechanism cover, rocker shaft assembly, and pushrods of the 3054E engine.
2) Detailed steps and illustrations guide the disassembly and reassembly of each component, including any required tools.
3) Proper cleaning and installation of seals and gaskets is emphasized to prevent contamination.
Caterpillar Cat TH340B Telehandler (Prefix SLC) Service Repair Manual Instant...gua6982552kun
This document provides instructions for removing and installing various components of a TH340B Telehandler including the flywheel housing, crankshaft pulley, crankshaft front seal, and front cover. The flywheel housing removal procedure involves using lifting equipment to support the housing while removing setscrews. The crankshaft pulley installation ensures proper lubrication and torque of setscrews. The crankshaft front seal removal uses a puller, while installation uses a special tool and nut to push the seal into place. Front cover removal and installation requires removing/installing setscrews and ensuring a clean gasket surface.
This document provides instructions for removing and installing various engine components on a Caterpillar 3054B engine, including:
- Removing and installing the rocker arm and shaft, which involves installing new pushrods and oil seals and adjusting valve lash.
- Removing the cylinder head, which requires removing fuel injectors, exhaust manifolds, temperature regulators, rocker arms, and pushrods before loosening bolts and lifting the head off.
- Installing the cylinder head, which involves cleaning surfaces, installing a new gasket, torquing bolts in a specific sequence, and adjusting valve lash.
- Removing and installing the valve lifters using a magnet tool to pick them up
This document provides instructions for removing and installing the camshaft gear on a Caterpillar 3054B engine. The removal process involves aligning timing marks, removing a bolt and washer, and using a puller tool. The installation involves positioning the camshaft gear properly, installing the washer and bolt, and ensuring timing marks are aligned. Tools and torque specifications are provided.
This document provides assembly instructions for various components of a TH103 Telehandler 3PN transmission, including the forward high clutch drum assembly, forward high and reverse idler shaft assembly, output shaft and third clutch assembly, reversing clutch assembly, and second clutch assembly. The instructions include cleaning and inspecting parts, installing bearings and seals, assembling clutch components like springs, discs, and plates, and securing parts with retaining rings. Tools needed include retaining ring pliers, a compressor, and driver. Temperature and positioning details are provided for proper assembly.
This document provides instructions for removing and installing various components of a Caterpillar 3054 engine, including the valve cover, rocker shaft, pushrods, and cylinder head. The removal and installation procedures describe loosening specific bolts and nuts in a particular sequence, removing gaskets and seals, and ensuring proper alignment of components during reassembly.
This document provides instructions for removing and installing the cylinder head on a Caterpillar 3054 engine. The key steps are:
1. Drain coolant and remove components attached to the cylinder head like the air inlet manifold, exhaust manifold, fuel injection nozzles, and rocker arm assembly.
2. Gradually loosen the 22 cylinder head bolts in reverse tightening order.
3. Attach a lifting device and carefully remove the cylinder head, weighing 41 kg/90 lb. Remove the cylinder head gasket and note dowel pin locations.
4. Check for cylinder head distortion by aligning a straight edge with an installed bolt.
This document provides instructions for removing and installing various engine components on a Caterpillar 3054 engine, including the cylinder head, rocker shaft and pushrods, lifter group, and camshaft. The procedures describe removing parts, cleaning them, installing new seals or lubricating components, and tightening fasteners to the specified torques. Safety notices are included to warn technicians about containing fluids and preventing contaminants.
This document provides instructions for removing and installing various engine components on a Caterpillar D6R track-type tractor, including:
- Removing the valve mechanism cover and gasket
- Removing the valve mechanism cover base and seal
- Removing the cylinder head by draining coolant, disconnecting harnesses and tubes, removing bolts, and lifting it off using a link bracket tool.
This document provides instructions for disassembling and assembling the torque divider of a D6G2 track-type tractor. It describes removing over 30 individual components of the torque divider including gears, seals, bearings, and housing pieces. Detailed illustrations and notes are provided to caution safe operation and containment of fluids. Proper cleaning and inspection of all parts is emphasized before reassembling the torque divider using the provided tools.
The document provides instructions for disassembling and assembling the piston pump steering system on a D5R2 track-type tractor. It details 39 steps to disassemble components such as the piston pump, valves, housing, pistons, and seals. It then lists 36 steps for reassembling these components in reverse order. Safety warnings are provided throughout to prevent injury from spring-loaded parts.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, engine oil pan, and piston cooling jets. The procedures describe draining fluids, using required tools, cleaning and applying sealant to mating surfaces, and torquing bolts to specified values. Safety notices are provided to contain fluids and prevent contamination.
This document provides assembly instructions for the piston pump on the left side of a D5K XL track-type tractor. It includes 40 steps to assemble various components like springs, seals, valves, plates, and housing pieces. Special tools are required and safety precautions mentioned, like following procedures carefully when assembling spring-loaded parts to avoid injury. Measurements must be taken to determine the correct shim thickness for the rotating group.
This document provides instructions for installing a cylinder head on a D4K2 XL track-type tractor. It describes cleaning and inspecting the cylinder head and cylinder block faces and installing dowels. It outlines torquing the bolts that secure the cylinder head in the correct sequence. Proper lubrication and alignment of the cylinder head gasket is emphasized to avoid leaks or damage.
This document provides instructions for removing and installing the valve mechanism cover on a Caterpillar D4K2 XL track-type tractor powered by a C4.4 engine. The procedure involves removing bolts and brackets to access the cover, then removing and installing a new gasket before reinstalling the cover and related components. Separate sections provide details on disassembling and assembling the rocker shaft and related parts.
Caterpillar Cat CB564D Vibratory Compactor (Prefix D4M) Service Repair Manual...gua6982552kun
This document provides instructions for removing and installing the flywheel housing on a Caterpillar 3054C engine. The flywheel housing must first be supported with lifting equipment as it weighs approximately 39 kg. Setscrews securing the housing must be removed, and the housing can then be lifted off while tapping it with a soft hammer if needed. Cleaning and inspection steps are described before reinstalling the housing using setscrews, ensuring proper torque is applied.
This document provides instructions for removing and installing the front gear group of a C15 Industrial Engine N5F. Key steps include removing the front housing, camshaft gear, and various gears and plates. Installation involves cleaning parts, applying thread lock to bolts, and adjusting backlash between gears. Tightening torques and sequences are specified.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
1. Product: TRACK LOADER
Model: 955K TRACK LOADER 85J
Configuration: 955K TRAXCAVATOR 85J00001-04671 (MACHINE)
Disassembly and Assembly
955L TRACK-TYPE LOADER ENGINE
Media Number -SENR7366-00 Publication Date -01/06/1993 Date Updated -12/10/2001
Fuel Injection Pump Housing And Governor
SMCS - 1278-11; 1278-12; 1278-15; 1278-16
Separation Of Governor From Fuel Injection Pump Housing
start by:
a) remove fuel injection pump housing and governor
b) remove adapter housing
1. Put the fuel injection pump housing and governor in position on tool (A).
2. Remove bolts (1) that hold the governor housing (2) to the fuel injection pump housing.
1/6
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
2. 3. Remove governor housing (2).
4. Remove two bolts (3) from the cover. Remove cover (4) from over the torque spring.
5. Remove spring (7), wave washer (6) and guide (5) from the governor housing.
6. Remove gasket (8) from the governor housing.
7. Remove bolt (11) and nut (9) from the torque spring (10). Remove the torque spring.
8. Remove pin (12) from the hole in the fuel injection pump housing.
9. Remove seat (15) and over fueling spring (16) from the shaft.
10. Pull shaft (13) up and remove lever (14).
2/6
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 11. Remove riser (follower) (18) from the shaft.
12. Remove ring and lever (17) from the dowel.
13. Remove cover (19) with tool (B).
NOTE: Tool (B) can cause damage to cover. Always inspect the cover for damage and install a
new cover if needed.
14. Install timing pin (20) to hold the camshaft from turning.
15. Remove three bolts (21) that hold the flyweight assembly in position.
16. Remove flyweight assembly (22).
17. Remove the timing pin from the fuel injection pump housing.
Connection Of Governor To Fuel Injection Pump Housing
3/6
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 1. Put the fuel injection pump housing on tool (A).
2. Install timing pin (1) to hold the camshaft from turning.
3. Put flyweight assembly (2) in position on the camshaft.
NOTICE
Make sure the pin that holds the shaft in the flyweight assembly is in
position before installing the flyweight assembly.
4. Install three new bolts that hold the flyweight assembly to the camshaft.
NOTE: The bolts for holding the flyweight assembly to the camshaft have a locking material on
the threads. The bolts must not be used more then one time.
5. Install cover (3) over the flyweight assembly with tool (B).
6. Grind a taper on the bottom edge of a 1/8" screwdriver (4). Install the screwdriver through the
bolt hole in the governor housing. The screwdriver must fit evenly against the flyweight assembly
cover. Make a mark (stake) in four places around the cover in line with the groove in the camshaft.
4/6
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. NOTICE
Never install a used flyweight cover.
7. Put lever (7) on the dowel. Install ring (6).
8. Install pin (5) in the fuel injection pump housing with the round edge down.
9. Put the riser (follower) (11) in position between the flyweights. Lift the flyweights up with a
piece of wire and push the riser (follower) forward.
10. Put lever (10) in position in the groove of the riser (follower) (11) and the ball end engaged in
the sleeve shaft lever (8). Install shaft (9) that holds the lever in position.
NOTICE
If lever (10) is not installed correctly, the governor can not operate and
can cause the engine to overspeed.
5/6
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 11. Install over fueling spring (14) and seat (13) on the shaft.
12. Install the torque spring (12). Install the bolt and nut that hold the torque spring in position.
13. Install guide (18), wave washer (16) and spring (17) in the governor housing.
14. Put a new gasket (15) on the governor housing.
15. Install cover (19) over the torque spring. Install the two bolts that hold the cover in position.
16. Put the governor housing on the fuel injection pump housing. Install the bolts that hold the
governor housing in position.
end by:
a) install adapter housing
b) install fuel injection pump housing and governor
6/6
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Product: TRACK LOADER
Model: 955K TRACK LOADER 85J
Configuration: 955K TRAXCAVATOR 85J00001-04671 (MACHINE)
Disassembly and Assembly
955L TRACK-TYPE LOADER ENGINE
Media Number -SENR7366-00 Publication Date -01/06/1993 Date Updated -12/10/2001
Governor
SMCS - 1264-15; 1264-16
Disassemble Governor
start by:
a) separation of governor from fuel injection pump housing
1. Remove shaft (2). Remove pin (1) from the shaft.
2. Remove pins (3) from the flyweights. Remove flyweights (4).
3. Remove ring, races (6) and bearings from the riser (follower) (5).
NOTE: There is a force on the cover (7) from the spring (8).
1/6
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. 4. Remove cover (7) and spring (8) from the governor housing.
5. Remove seal (9) from the cover.
6. Remove cover (10) for the low and high idle adjustments.
7. Remove locknut and screw (13) for the high idle adjustment.
8. Remove bolt (15) and washers for the low idle adjustment.
9. Remove spring (16) and guide.
10. Remove pin (14) and plate (11).
11. Remove shaft (12) from the housing.
12. Remove pin (18) and two spacers (17) from the shaft.
NOTE: Earlier model sleeve metering fuel systems have a ball in place of spacers (17) and pin
(18).
2/6
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 13. Remove shaft (19) from the governor housing.
14. Remove washer (20) and levers (21) and (22) from the governor housing.
15. Remove seal (24) and bearing.
16. Remove seals (23) and (25) from the governor housing.
Assemble Governor
1. Install the bearing and seal in the housing with tool (A). The lip of the seal must be toward the
bearing.
2. Install seal (1) in the housing with tool (A). The lip of the seal must be toward the inside of the
housing.
3/6
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. 3. Install seal (2) in the housing with tooling (B). The lip of the seal must be toward the inside of
the housing.
4. Install shaft (3) in the housing.
5. Install plates (4), spacers (8) and pin (7) on the shaft.
6. Install shaft (5) in the housing and through washer (9) and levers (6).
7. Install pin (11) in holes of the plates.
8. Install screw (10) and locknut for high idle adjustment.
9. Install spring (13) and guide.
10. Install bolts (12) and washer for low idle adjustment.
11. Push plate and pin (11) over toward bolt (12) and tighten the bolt.
12. Install the seal in the cover with tooling (B). The lip of the seal must be toward the inside.
4/6
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 13. Install spring (15) in the cover.
NOTICE
The spring (15) must be installed with the end of the spring as shown.
14. Install the cover (16) for the idle adjustment screws.
15. Install bearing (19) between races (18) on riser (follower) (17). Install ring (20) that holds the
washer on the riser (follower).
5/6
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 16. Install pin in shaft (23).
17. Install flyweights (22) and pin (21).
18. Install shaft (23) in flyweight assembly.
end by:
a) connection of governor to fuel injection pump housing
6/6
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Product: TRACK LOADER
Model: 955K TRACK LOADER 85J
Configuration: 955K TRAXCAVATOR 85J00001-04671 (MACHINE)
Disassembly and Assembly
955L TRACK-TYPE LOADER ENGINE
Media Number -SENR7366-00 Publication Date -01/06/1993 Date Updated -12/10/2001
Fuel Check Valve And Bypass Valve
SMCS - 1264-15; 1264-16
Remove Fuel Check Valve And Bypass Valve
NOTICE
Clean the outer surface of the fuel injection pump housing and
governor before removing the fuel check valve and bypass valve.
1. Remove the fuel from the fuel injection pump housing. Install the fuel injection pump housing
and governor on tool (A).
2. Remove eight bolts (2). Remove cover (1).
3. Remove check valve (3).
1/2
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 4. Remove spring (4) and the bypass valve.
Install Fuel Check Valve And Bypass Valve
1. Install bypass valve (2) and spring (1) in the fuel injection pump housing.
2. Install check valve (3) in the fuel injection pump housing. Make sure the check valve is
installed evenly in the fuel injection pump housing.
NOTE: Do not install a check valve that is bent.
3. Put the cover in position on the fuel injection pump housing. Make sure the spring on the
bypass valve is in the cover. Install the eight bolts that hold the cover in position.
2/2
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Product: TRACK LOADER
Model: 955K TRACK LOADER 85J
Configuration: 955K TRAXCAVATOR 85J00001-04671 (MACHINE)
Disassembly and Assembly
955L TRACK-TYPE LOADER ENGINE
Media Number -SENR7366-00 Publication Date -01/06/1993 Date Updated -12/10/2001
Fuel Injection Pumps
SMCS - 1251-15; 1251-16; 1251-11; 1251-12
Remove Fuel Injection Pumps
NOTICE
Before any service work is to be done on the fuel system the outer
surface of injection pump housing must be clean.
1. Remove the cover assembly (1) from the pump housing. Remove spring for the bypass valve.
1/4
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 2. Loosen the bushing (2) from the pump housing with tool (A).
NOTE: Do not loosen the screws (3) that hold levers to shaft when the pumps are removed or
installed. If levers are moved, fuel pump adjustment will be changed.
3. Remove the fuel injection pump from the pump housing. The sleeve on the plunger will slide
off the lever as the pump is removed.
Install Fuel Injection Pumps
1. Put the fuel injection pump (1) in the bore of pump housing.
2. The sleeve (2) will be engaged with lever when installed correctly.
NOTICE
If levers have been moved on the shaft, fuel pump adjustment must be
made. (See TESTING AND ADJUSTING).
3. Tighten the bushing with wrench (A) to a torque of 70 ± 5 lb. ft. (94.9 ± 6.8 N·m).
4. Put the spring on the bypass valve. Install the cover assembly on the pump housing. Be sure the
spring (3) is in position in the cover.
Disassemble Fuel Injection Pumps
2/4
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. start by:
a) remove fuel injection pumps
1. Remove the bushing (1) from the bonnet (2).
2. Remove the ring (3) from the bonnet and barrel (7). Remove the check valve (6) and spring (4)
from the bonnet.
3. Remove the spring (8) and washer (5). Remove the plunger (9) and sleeve (10).
NOTE: Keep the plunger and sleeve with their respective barrel for installation. Do not use
plungers, sleeves, and barrels with other plungers, sleeves, and barrels.
Assemble Fuel Injection Pumps
3/4
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 1. Install the sleeve (4), plunger (5), spring (2), and washer (3) on the barrel (1).
NOTE: Be sure sleeve and plunger are installed in original barrel, and large hole in plunger is up.
2. Install check valve and spring in bonnet. Connect the barrel and bonnet and install the ring.
Install the bushing on the bonnet.
end by:
a) install fuel injection pumps
4/4
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Product: TRACK LOADER
Model: 955K TRACK LOADER 85J
Configuration: 955K TRAXCAVATOR 85J00001-04671 (MACHINE)
Disassembly and Assembly
955L TRACK-TYPE LOADER ENGINE
Media Number -SENR7366-00 Publication Date -01/06/1993 Date Updated -12/10/2001
Fuel Transfer Pump
SMCS - 1256-11; 1256-12
Remove Fuel Transfer Pump
1. Put the fuel injection pump housing on tool (A).
2. Install timing pin (1) to keep the injection pump camshaft in position when the transfer pump is
removed.
3. Install bolt (B) in the threads of sleeve (4). Tighten the bolt until the sleeve can be removed.
NOTICE
1/5
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Do not hit the bolt or sleeve. This will cause damage to the unit.
4. Remove bolts (3) that hold the body to the housing.
5. Remove body (2) from the housing.
6. Remove idler gear (6) from the body.
7. Remove O-ring seal (5) and the two lip-type seals from the body.
8. Remove drive gear (7) from the shaft.
9. Remove key (8) from the shaft.
Install Fuel Transfer Pump
2/5
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. 1. Install the inner seal in the body with tool (A). The lip of the seal must be toward the pump
gears.
2. Install the outer seal with tool (B). The lip of the seal must be toward the outside.
NOTICE
Always be careful not to cause damage to the machined surface of the
pump body.
3. Install the O-ring seal (2) and the idler gear (1) on the body.
4. Install the key and drive gear (3) on the shaft.
3/5
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. 5. Install the body (4) on the housing.
6. Install the bolts that hold the body to the housing.
7. Put the sleeve (5) in position on the camshaft.
NOTE: The timing pin must be in the position shown to keep the camshaft in position when the
transfer pump is installed.
8. Install the sleeve on the camshaft with tooling (C).
NOTICE
Do not hit the sleeve with a hammer to install it. This will put end force
on the camshaft and cause damage to the other components in the
pump housing.
4/5
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. 9. The end clearance of the camshaft must be .023 ± .018 in. (0.58 ± 0.46 mm) after sleeve (5) is
installed.
end by:
a) install fuel injection pump housing and governor
5/5
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Suggest:
For more complete manuals. Please go to
the home page.
https://www.ebooklibonline.com
If the above button click is invalid. Please
download this document first, and then
click the above link to download the
complete manual.
Thank you so much for reading
25. Product: TRACK LOADER
Model: 955K TRACK LOADER 85J
Configuration: 955K TRAXCAVATOR 85J00001-04671 (MACHINE)
Disassembly and Assembly
955L TRACK-TYPE LOADER ENGINE
Media Number -SENR7366-00 Publication Date -01/06/1993 Date Updated -12/10/2001
Fuel Injection Pump Housing
SMCS - 1253-15; 1253-16
Disassemble Fuel Injection Pump Housing
start by:
a) remove fuel injection pumps
b) separation of governor from fuel injection pump housing
c) remove fuel transfer pump
1. Remove the dowel from the fuel injection pump housing for the torque spring lever.
1/3
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. 2. Loosen the screws that hold levers (1) to the sleeve control shaft (2).
3. Remove the sleeve control shaft (2) from the fuel injection pump housing.
4. Remove lifters and roller assemblies (3) from the fuel injection pump housing.
NOTE: Put identification on the lifters and rollers so they will not be mixed at assembly.
5. Remove the camshaft from the fuel injection pump housing.
Assemble Fuel Injection Pump Housing
2/3
955K TRAXCAVATOR 85J00001-04671 (MACHINE)(UEG0008S - 00) - Document...
2021/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...