SlideShare a Scribd company logo
Product: TRACK LOADER
Model: 977K TRACK LOADER 48J
Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE)
Disassembly and Assembly
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001
Camshaft
SMCS - 1210-11; 1210-12
Remove Camshaft
start by:
a) remove valve lifters
b) remove timing gear cover
1. Turn the crankshaft until the "C" mark on the crankshaft gear is in alignment with the "C" mark
on the camshaft gear.
NOTE: To keep the engine timing correct during removal and installation of the camshaft, put a
mark on the teeth of the idler gear and the camshaft gear at location (A).
2. Remove bolts (1) and remove camshaft gear (2).
3. Remove bolts, lock and washer (3). Remove camshaft (4).
1/2
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Install Camshaft
1. Put clean SAE 30 oil on the lobes and bearing journals of the camshaft.
2. Install camshaft (1) in the block.
3. Install washer (2), lock and bolts that hold the camshaft in place.
4. Put the camshaft gear (3) in position on the camshaft so the "C" mark on the camshaft gear is in
alignment with the "C" mark on the crankshaft gear. Install the bolts that hold the camshaft gear in
place.
NOTE: The drive gear will fit on the camshaft one way only. If necessary, turn the camshaft to
make alignment of the holes of the drive gear and the camshaft.
end by:
a) install timing gear cover
b) install valve lifters
2/2
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Product: TRACK LOADER
Model: 977K TRACK LOADER 48J
Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE)
Disassembly and Assembly
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001
Timing Gears And Plate
SMCS - 1162-11; 1162; 1206-12; 1206
Remove Timing Gears And Plate
start by:
a) remove timing gear cover
1. Put the engine in correct timing. See REMOVE FUEL INJECTION PUMP HOUSING AND
GOVERNOR for this procedure.
2. Remove the bolt and washer that hold gear (1) and install tooling (C) on the end of the bolt.
Install and tighten the bolt, washer and tooling (C) to hold the sleeve on the end of the fuel
injection pump camshaft.
1/5
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Install tooling (A) on gear (1) and tighten the center bolt of tooling (A) until gear (1) is
loosened. Remove tooling (B), the bolt, washers and gear (1).
4. Remove bolts (2), plate (4) and the idler gear (5). Remove bolts (3) and the washers to remove
gear (6) from the camshaft.
5. Inspect the bearing in idler gear (5) for wear or damage. If a replacement of the bearing is
needed, use tool group (B) to remove it from the gear as shown.
6. Remove the nuts and washers that hold the fuel injection pump housing to studs (7).
7. Remove the six bolts (8) and locks (9) that hold the timing gear plate to the cylinder block.
Remove the timing gear plate and gasket from the engine.
Install Timing Gears And Plate
2/5
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Install the timing gear plate and gasket. Install the two locks and six bolts.
2. Install the three nuts and washers that hold the fuel injection pump housing to the timing gear
plate.
3. Install the camshaft drive gear. Make sure the "C" mark on the crankshaft gear is in alignment
with the "C" mark on the camshaft drive gear. Install the four washers and bolts.
4. Use tool (B) to install the bearing in the idler gear.
5. Install idler gear (2). Install plate (3) and bolts (1).
6. Put the fuel injection pump drive gear in position on the fuel system. Install the bolt and washer
that holds it finger tight only.
3/5
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
TYPICAL EXAMPLE
7. Install tooling (A) in the holes of the fuel injection pump drive gear as shown. Put a torque of
approximately 50 lb.ft. (70 N·m) on the pump drive gear in a clockwise direction (as seen from
the front of the engine). With the clockwise torque on the pump drive gear tighten the bolt to a
torque of 110 ± 5 lb.ft. (149 ± 7 N·m).
end by:
a) install timing gear cover
4/5
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5/5
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Product: TRACK LOADER
Model: 977K TRACK LOADER 48J
Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE)
Disassembly and Assembly
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001
Engine And Torque Converter
SMCS - 1003-11; 1003-12
Remove Engine And Torque Converter
start by:
a) remove radiator and radiator guard
b) remove rear crankcase guards *
c) remove universal joint *
d) remove air cleaner assembly
*
These operations are in the POWER TRAIN DISASSEMBLY AND ASSEMBLY section.
1. Drain the oil from the engine.
2. Drain oil from the torque converter.
3. Drain the oil from the hydraulic tank.
4. Turn the valve for the fuel supply to the "OFF" position.
5. Remove plate assemblies (1) and floor plates (2).
1/6
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Remove transmission and torque converter filter housing (3). Remove tube assembly (4).
Disconnect hose assembly (5) from the top of the hydraulic pump. Disconnect the clip that holds
the torque converter oil temperature sensing line to the torque converter.
VIEW FROM UNDER MACHINE
7. Disconnect tube assembly (7) from the hydraulic pump. Disconnect hose assembly (6) from the
torque converter inlet relief valve. Disconnect hose assembly (8) from the scavenge pump.
Disconnect tube assembly (10) from the torque converter. Remove torque converter oil
temperature sensing bulb (9) from the torque converter outlet relief valve. Remove tube assembly
(11).
8. Disconnect two heater hoses (13) and remove water temperature sensing bulb (12).
2/6
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Disconnect governor control rod (14) from lever. Disconnect fuel line (15) from fuel filter base.
NOTE: Put a mark on all wires before they are removed or disconnected for installation purpose.
10. Disconnect wiring harness (16) from the electric starting motor, alternator and glow plug
wiring harness.
11. Disconnect two small tubes (19). Remove tube assemblies (17) and (18) and swivel joints.
12. Fasten a hoist to the engine. Remove bolt (20) from rear support on each side. Remove two
bolts and nuts from front support.
13. Remove the engine (21) and torque converter from the machine. Weight of the engine and
torque converter is 3000 lb. (1350 kg).
3/6
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Install Engine And Torque Converter
1. Fasten a hoist to engine (1) and torque converter (2). Put the engine and torque converter in
position on the frame of the machine.
NOTICE
Do not cause damage to any tubes, hoses or wires when the engine is
put in position.
2. Install the rear support bolts. Tighten them to a torque of 200 ± 25 lb.ft. (270 ± 35 N·m). Install
the front support bolts and nuts.
3. Install tube assemblies (3) and (4) and swivel joints. Connect two small tubes (5).
4. Connect wiring harness (7) to the electric starting motor, alternator and glow plug wiring
harness.
5. Connect fuel line (8) to the fuel filter base.
4/6
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Connect governor control rod (6) to lever.
7. Install water temperature sensing bulb (9).
8. Connect two heater hoses (10).
9. Connect tube assembly (12) to the hydraulic pump. Connect hose assembly (11) to the torque
converter inlet relief valve. Connect hose assembly (13) to the scavenge pump. Connect tube
assembly (15) to the torque converter. Install torque converter oil temperature sensing bulb (14) to
the torque converter outlet relief valve. Install tube assembly (16).
10. Install transmission and torque converter filter housing (19). Install tube assembly (17) to the
torque converter and magnetic screen. Connect hose assembly (18) to the top of the hydraulic
pump. Connect the clip that holds the torque converter oil temperature sensing line to the torque
converter.
5/6
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Install floor plates (21) and plate assemblies (20).
12. Turn the valve for the fuel supply to the "ON" position.
13. Fill the engine with oil to the correct level. See LUBRICATION AND MAINTENANCE
GUIDE.
14. Fill the transmission and bevel gear case with oil to the correct level. See LUBRICATION
AND MAINTENANCE GUIDE.
15. Fill the hydraulic tank with oil to the correct level. See LUBRICATION AND
MAINTENANCE GUIDE.
end by:
a) install universal joint *
b) install rear crankcase guards *
c) install radiator and radiator guard
d) install air cleaner assembly
*
These operations are in the POWER TRAIN DISASSEMBLY AND ASSEMBLY section.
6/6
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Product: TRACK LOADER
Model: 977K TRACK LOADER 48J
Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE)
Disassembly and Assembly
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001
Flywheel
SMCS - 1156-11; 1156-12
Remove Flywheel
start by:
a remove engine and torque converter
1. Install a 5/8"-11 NC forged eyebolt to the torque converter. Fasten a hoist and remove ten bolts
(1) that hold the torque converter to the flywheel housing.
1/3
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
2. Install two 3/8"-16 NC forcing screws. Turn the forcing screws evenly until the torque
converter is free of the flywheel housing. Remove torque converter (2). Weight of the torque
converter is 450 lb. (204 kg).
3. Loosen the nine bolts that hold flywheel to the crankshaft.
4. Remove two bolts and install two 5/8"-18 NF guide bolts. Install tool (A) and remove the other
bolts. Remove flywheel (3). Weight of the flywheel is 65 lb. (29 kg).
5. Remove gear (4) from the flywheel.
Install Flywheel
1. Heat the ring gear to a maximum temperature of 600°F (316°C). Install ring gear (1) to the
flywheel.
2. Install two 5/8"-18 NF guide bolts to the flange of the crankshaft.
2/3
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Use tool (A) and put flywheel (2) in position. Install the nine bolts that hold the flywheel to the
crankshaft.
4. Fasten a hoist to torque converter (3) and put it in position.
NOTE: Check the O-ring seal for damage. If the seal has damage, use a new part for replacement.
5. Install the ten bolts that hold the torque converter to the flywheel housing.
end by:
a) install engine and torque converter
3/3
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Product: TRACK LOADER
Model: 977K TRACK LOADER 48J
Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE)
Disassembly and Assembly
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001
Crankshaft Rear Seal And Wear Sleeve
SMCS - 1161-11; 1161-12
Remove Crankshaft Rear Seal And Wear Sleeve
start by:
a) remove flywheel
NOTE: When a replacement of the rear seal is made, a replacement of the wear sleeve is to be
made also.
1. Remove the crankshaft rear seal with tool (A).
1/3
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
2. Install tool (C) in the rear seal bore.
3. Install tool (B) between tool (C) and the wear sleeve. Turn tool (B) until the edge of the tool
makes a flat place (crease) in the wear sleeve. Do this in two or more places until the wear sleeve
in loose.
4. Remove tool (C) and the wear sleeve by hand.
Install Crankshaft Rear Seal And Wear Sleeve
1. Install the crankshaft rear seal and wear sleeve with tooling (A) as follows:
a) Put locator (1) in position on the crankshaft and install the three bolts that hold it in place.
2/3
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
b) Put clean engine oil on the seal lip of seal (6) and on the outside diameter of wear sleeve (2).
c) Install seal (6) on wear sleeve (2) from the end of the wear sleeve that has the bevel on the
outside diameter. Make sure the lip of the seal is toward the inside of the engine and the bevel that
is on the outside diameter of the wear sleeve is toward the outside of the engine when installed.
d) Use 8M8060 Quick Cure Primer to clean the outside diameter of the crankshaft flange (3) and
the inside diameter of wear sleeve (2).
e) Put 9S3265 Retaining Compound on the outside diameter of crankshaft flange (3) and the
inside diameter of wear sleeve (2).
NOTE: Make sure the lip of the seal is toward the inside of the engine and the outside diameter
bevel of the wear sleeve is toward the outside of the engine.
f) Put wear sleeve (2) with seal (6) on locator (1). Put installer (4) on locator (1) and install nut (5).
Put lubrication on the face of the washer and the nut.
g) Tighten nut (5) until installer (4) comes in contact with locator (1).
h) Remove tooling (A) and check the wear sleeve and seal for correct installation.
end by:
a) install flywheel
3/3
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Product: TRACK LOADER
Model: 977K TRACK LOADER 48J
Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE)
Disassembly and Assembly
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001
Flywheel Housing
SMCS - 1157-11
Remove Flywheel Housing
start by:
a) remove flywheel
b) remove starter
1. Remove the bolts that hold the oil pan plate to the flywheel housing. Loosen the bolts that hold
the oil pan plate to the cylinder block.
2. Fasten a hoist to the engine. Lift the engine and install shims (1) on each side of the engine
between the cylinder block and the oil pan plate.
1/3
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Install tool (A) to the flywheel housing. Remove the thirteen bolts that hold the flywheel
housing to the cylinder block.
4. Remove flywheel housing (2). The weight of the flywheel housing is 110 lb. (50 kg).
Install Flywheel Housing
1. Clean the old gasket from the surfaces of the cylinder block and flywheel housing that make
contact with each other. Install a new gasket on the cylinder block.
2. Install two 1/2"-13 NC guide bolts (1) in the cylinder block as shown. Install tooling (A) on the
flywheel housing. Fasten a hoist and put the flywheel housing in position on the guide bolts.
Install all but two bolts in the flywheel housing. Remove tooling (A) and the guide bolts. Install
the other two bolts.
3. Cut the bottom of the gasket even with the flywheel housing and cylinder block. Put 5H2471
Gasket Cement on the bottom of the gasket where the gasket makes contact with the gasket for the
oil pan plate. Remove shims (2) from each side of the engine. Tighten all of the oil pan bolts.
Install the bolts that hold the oil pan plate to the flywheel housing.
2/3
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
end by:
a) install starting motor
b) install flywheel
3/3
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Suggest:
For more complete manuals. Please go to
the home page.
https://www.ebooklibonline.com
If the above button click is invalid. Please
download this document first, and then
click the above link to download the
complete manual.
Thank you so much for reading
Product: TRACK LOADER
Model: 977K TRACK LOADER 48J
Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE)
Disassembly and Assembly
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001
Camshaft Bearings
SMCS - 1211-11; 1211-12
Remove Camshaft Bearings
start by:
a) remove oil pan plate
b) remove timing gears and plate
c) remove flywheel housing
d) remove camshaft
1. Remove the camshaft bearings with tooling (A).
Install Camshaft Bearings
1/3
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Install the camshaft bearings in the cylinder block with tooling (A).
NOTE: Install all bearings with oil hole in bearing in alignment with oil hole in cylinder block.
2. The front and rear bearings are to be .06 in. (1.5 mm) inside the ends of the cylinder block after
installation.
end by:
a) install camshaft
b) install flywheel housing
c) install timing gears and plate
d) install oil pan plate
2/3
977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document...
2021/10/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

More Related Content

Similar to Caterpillar Cat 977K 977L TRACK LOADER (Prefix 48J) Service Repair Manual Instant Download (48J00586-01058).pdf

Caterpillar Cat 977K TRACK LOADER (Prefix 48J) Service Repair Manual Instant ...
Caterpillar Cat 977K TRACK LOADER (Prefix 48J) Service Repair Manual Instant ...Caterpillar Cat 977K TRACK LOADER (Prefix 48J) Service Repair Manual Instant ...
Caterpillar Cat 977K TRACK LOADER (Prefix 48J) Service Repair Manual Instant ...
ti76cui
 
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
gua6982552kun
 
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
ti76cui
 
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
ting1499041267
 
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
jiaoyi82414369
 
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
cangci7058
 
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
yeeb900328
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
tengtui535
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
ze6074xunong
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
f8seodkdmdmed3
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
f8usjejkdmmd
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
f8usejkdmmd8i
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
fujsked9dikdkd
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
ufjskekdjdmw2
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
gen78guozun
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
fjskemmd4r
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
jfkksemmdmd
 
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
fujsefkskemm
 
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
ufjjdkkksmme
 
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
uujjfjkkkdmme
 

Similar to Caterpillar Cat 977K 977L TRACK LOADER (Prefix 48J) Service Repair Manual Instant Download (48J00586-01058).pdf (20)

Caterpillar Cat 977K TRACK LOADER (Prefix 48J) Service Repair Manual Instant ...
Caterpillar Cat 977K TRACK LOADER (Prefix 48J) Service Repair Manual Instant ...Caterpillar Cat 977K TRACK LOADER (Prefix 48J) Service Repair Manual Instant ...
Caterpillar Cat 977K TRACK LOADER (Prefix 48J) Service Repair Manual Instant ...
 
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
 
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
 
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
 
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
 
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
 
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
Caterpillar Cat M320 Excavator (Prefix 9PS) Service Repair Manual (9PS00001 a...
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual Instant Down...
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
 
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...
 
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
 
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
 
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
Caterpillar cat 245 excavator (prefix 95 v) service repair manual (95v00001 0...
 

More from ti76cui

Caterpillar Cat D5R2 TRACK-TYPE TRACTOR (Prefix WRE) Service Repair Manual In...
Caterpillar Cat D5R2 TRACK-TYPE TRACTOR (Prefix WRE) Service Repair Manual In...Caterpillar Cat D5R2 TRACK-TYPE TRACTOR (Prefix WRE) Service Repair Manual In...
Caterpillar Cat D5R2 TRACK-TYPE TRACTOR (Prefix WRE) Service Repair Manual In...
ti76cui
 
Caterpillar Cat D5N TRACK-TYPE TRACTOR (Prefix AKD) Service Repair Manual Ins...
Caterpillar Cat D5N TRACK-TYPE TRACTOR (Prefix AKD) Service Repair Manual Ins...Caterpillar Cat D5N TRACK-TYPE TRACTOR (Prefix AKD) Service Repair Manual Ins...
Caterpillar Cat D5N TRACK-TYPE TRACTOR (Prefix AKD) Service Repair Manual Ins...
ti76cui
 
Caterpillar Cat D5K XL TRACK-TYPE TRACTOR (Prefix WWW) Service Repair Manual ...
Caterpillar Cat D5K XL TRACK-TYPE TRACTOR (Prefix WWW) Service Repair Manual ...Caterpillar Cat D5K XL TRACK-TYPE TRACTOR (Prefix WWW) Service Repair Manual ...
Caterpillar Cat D5K XL TRACK-TYPE TRACTOR (Prefix WWW) Service Repair Manual ...
ti76cui
 
Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix MT3) Service Repair Manual...
Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix MT3) Service Repair Manual...Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix MT3) Service Repair Manual...
Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix MT3) Service Repair Manual...
ti76cui
 
Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix KM2) Service Repair Manual...
Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix KM2) Service Repair Manual...Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix KM2) Service Repair Manual...
Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix KM2) Service Repair Manual...
ti76cui
 
Caterpillar Cat CB564D Vibratory Compactor (Prefix D4M) Service Repair Manual...
Caterpillar Cat CB564D Vibratory Compactor (Prefix D4M) Service Repair Manual...Caterpillar Cat CB564D Vibratory Compactor (Prefix D4M) Service Repair Manual...
Caterpillar Cat CB564D Vibratory Compactor (Prefix D4M) Service Repair Manual...
ti76cui
 
Caterpillar Cat C15 Industrial Engine (Prefix N5F) Service Repair Manual Inst...
Caterpillar Cat C15 Industrial Engine (Prefix N5F) Service Repair Manual Inst...Caterpillar Cat C15 Industrial Engine (Prefix N5F) Service Repair Manual Inst...
Caterpillar Cat C15 Industrial Engine (Prefix N5F) Service Repair Manual Inst...
ti76cui
 
Caterpillar Cat C13 Industrial Engine (Prefix N3F) Service Repair Manual Inst...
Caterpillar Cat C13 Industrial Engine (Prefix N3F) Service Repair Manual Inst...Caterpillar Cat C13 Industrial Engine (Prefix N3F) Service Repair Manual Inst...
Caterpillar Cat C13 Industrial Engine (Prefix N3F) Service Repair Manual Inst...
ti76cui
 
Caterpillar Cat C13 Industrial Engine (Prefix LGK) Service Repair Manual Inst...
Caterpillar Cat C13 Industrial Engine (Prefix LGK) Service Repair Manual Inst...Caterpillar Cat C13 Industrial Engine (Prefix LGK) Service Repair Manual Inst...
Caterpillar Cat C13 Industrial Engine (Prefix LGK) Service Repair Manual Inst...
ti76cui
 
Caterpillar Cat C2.2 Industrial Engine (Prefix J26) Service Repair Manual Ins...
Caterpillar Cat C2.2 Industrial Engine (Prefix J26) Service Repair Manual Ins...Caterpillar Cat C2.2 Industrial Engine (Prefix J26) Service Repair Manual Ins...
Caterpillar Cat C2.2 Industrial Engine (Prefix J26) Service Repair Manual Ins...
ti76cui
 
Caterpillar Cat 3512E Marine Engine (Prefix SY3) Service Repair Manual Instan...
Caterpillar Cat 3512E Marine Engine (Prefix SY3) Service Repair Manual Instan...Caterpillar Cat 3512E Marine Engine (Prefix SY3) Service Repair Manual Instan...
Caterpillar Cat 3512E Marine Engine (Prefix SY3) Service Repair Manual Instan...
ti76cui
 
Caterpillar Cat 3512B Industrial Engine (Prefix BR2) Service Repair Manual In...
Caterpillar Cat 3512B Industrial Engine (Prefix BR2) Service Repair Manual In...Caterpillar Cat 3512B Industrial Engine (Prefix BR2) Service Repair Manual In...
Caterpillar Cat 3512B Industrial Engine (Prefix BR2) Service Repair Manual In...
ti76cui
 
Caterpillar Cat 3512 Industrial Engine (Prefix SR2) Service Repair Manual Ins...
Caterpillar Cat 3512 Industrial Engine (Prefix SR2) Service Repair Manual Ins...Caterpillar Cat 3512 Industrial Engine (Prefix SR2) Service Repair Manual Ins...
Caterpillar Cat 3512 Industrial Engine (Prefix SR2) Service Repair Manual Ins...
ti76cui
 
Caterpillar Cat 988F Series II Wheel Loader (Prefix 2ZR) Service Repair Manua...
Caterpillar Cat 988F Series II Wheel Loader (Prefix 2ZR) Service Repair Manua...Caterpillar Cat 988F Series II Wheel Loader (Prefix 2ZR) Service Repair Manua...
Caterpillar Cat 988F Series II Wheel Loader (Prefix 2ZR) Service Repair Manua...
ti76cui
 
Caterpillar Cat 988B Wheel Loader (Prefix 50W) Service Repair Manual Instant ...
Caterpillar Cat 988B Wheel Loader (Prefix 50W) Service Repair Manual Instant ...Caterpillar Cat 988B Wheel Loader (Prefix 50W) Service Repair Manual Instant ...
Caterpillar Cat 988B Wheel Loader (Prefix 50W) Service Repair Manual Instant ...
ti76cui
 
Caterpillar Cat 988 988K XE Wheel Loader (Prefix E8X) Service Repair Manual I...
Caterpillar Cat 988 988K XE Wheel Loader (Prefix E8X) Service Repair Manual I...Caterpillar Cat 988 988K XE Wheel Loader (Prefix E8X) Service Repair Manual I...
Caterpillar Cat 988 988K XE Wheel Loader (Prefix E8X) Service Repair Manual I...
ti76cui
 
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
ti76cui
 
Caterpillar Cat 953 TRACK LOADER (Prefix 05Z) Service Repair Manual Instant D...
Caterpillar Cat 953 TRACK LOADER (Prefix 05Z) Service Repair Manual Instant D...Caterpillar Cat 953 TRACK LOADER (Prefix 05Z) Service Repair Manual Instant D...
Caterpillar Cat 953 TRACK LOADER (Prefix 05Z) Service Repair Manual Instant D...
ti76cui
 
Caterpillar Cat 951B 951C TRACK LOADER (Prefix 32F) Service Repair Manual Ins...
Caterpillar Cat 951B 951C TRACK LOADER (Prefix 32F) Service Repair Manual Ins...Caterpillar Cat 951B 951C TRACK LOADER (Prefix 32F) Service Repair Manual Ins...
Caterpillar Cat 951B 951C TRACK LOADER (Prefix 32F) Service Repair Manual Ins...
ti76cui
 
Caterpillar Cat 943 TRACK LOADER (Prefix 19Z) Service Repair Manual Instant D...
Caterpillar Cat 943 TRACK LOADER (Prefix 19Z) Service Repair Manual Instant D...Caterpillar Cat 943 TRACK LOADER (Prefix 19Z) Service Repair Manual Instant D...
Caterpillar Cat 943 TRACK LOADER (Prefix 19Z) Service Repair Manual Instant D...
ti76cui
 

More from ti76cui (20)

Caterpillar Cat D5R2 TRACK-TYPE TRACTOR (Prefix WRE) Service Repair Manual In...
Caterpillar Cat D5R2 TRACK-TYPE TRACTOR (Prefix WRE) Service Repair Manual In...Caterpillar Cat D5R2 TRACK-TYPE TRACTOR (Prefix WRE) Service Repair Manual In...
Caterpillar Cat D5R2 TRACK-TYPE TRACTOR (Prefix WRE) Service Repair Manual In...
 
Caterpillar Cat D5N TRACK-TYPE TRACTOR (Prefix AKD) Service Repair Manual Ins...
Caterpillar Cat D5N TRACK-TYPE TRACTOR (Prefix AKD) Service Repair Manual Ins...Caterpillar Cat D5N TRACK-TYPE TRACTOR (Prefix AKD) Service Repair Manual Ins...
Caterpillar Cat D5N TRACK-TYPE TRACTOR (Prefix AKD) Service Repair Manual Ins...
 
Caterpillar Cat D5K XL TRACK-TYPE TRACTOR (Prefix WWW) Service Repair Manual ...
Caterpillar Cat D5K XL TRACK-TYPE TRACTOR (Prefix WWW) Service Repair Manual ...Caterpillar Cat D5K XL TRACK-TYPE TRACTOR (Prefix WWW) Service Repair Manual ...
Caterpillar Cat D5K XL TRACK-TYPE TRACTOR (Prefix WWW) Service Repair Manual ...
 
Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix MT3) Service Repair Manual...
Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix MT3) Service Repair Manual...Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix MT3) Service Repair Manual...
Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix MT3) Service Repair Manual...
 
Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix KM2) Service Repair Manual...
Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix KM2) Service Repair Manual...Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix KM2) Service Repair Manual...
Caterpillar Cat D4K2 XL TRACK-TYPE TRACTOR (Prefix KM2) Service Repair Manual...
 
Caterpillar Cat CB564D Vibratory Compactor (Prefix D4M) Service Repair Manual...
Caterpillar Cat CB564D Vibratory Compactor (Prefix D4M) Service Repair Manual...Caterpillar Cat CB564D Vibratory Compactor (Prefix D4M) Service Repair Manual...
Caterpillar Cat CB564D Vibratory Compactor (Prefix D4M) Service Repair Manual...
 
Caterpillar Cat C15 Industrial Engine (Prefix N5F) Service Repair Manual Inst...
Caterpillar Cat C15 Industrial Engine (Prefix N5F) Service Repair Manual Inst...Caterpillar Cat C15 Industrial Engine (Prefix N5F) Service Repair Manual Inst...
Caterpillar Cat C15 Industrial Engine (Prefix N5F) Service Repair Manual Inst...
 
Caterpillar Cat C13 Industrial Engine (Prefix N3F) Service Repair Manual Inst...
Caterpillar Cat C13 Industrial Engine (Prefix N3F) Service Repair Manual Inst...Caterpillar Cat C13 Industrial Engine (Prefix N3F) Service Repair Manual Inst...
Caterpillar Cat C13 Industrial Engine (Prefix N3F) Service Repair Manual Inst...
 
Caterpillar Cat C13 Industrial Engine (Prefix LGK) Service Repair Manual Inst...
Caterpillar Cat C13 Industrial Engine (Prefix LGK) Service Repair Manual Inst...Caterpillar Cat C13 Industrial Engine (Prefix LGK) Service Repair Manual Inst...
Caterpillar Cat C13 Industrial Engine (Prefix LGK) Service Repair Manual Inst...
 
Caterpillar Cat C2.2 Industrial Engine (Prefix J26) Service Repair Manual Ins...
Caterpillar Cat C2.2 Industrial Engine (Prefix J26) Service Repair Manual Ins...Caterpillar Cat C2.2 Industrial Engine (Prefix J26) Service Repair Manual Ins...
Caterpillar Cat C2.2 Industrial Engine (Prefix J26) Service Repair Manual Ins...
 
Caterpillar Cat 3512E Marine Engine (Prefix SY3) Service Repair Manual Instan...
Caterpillar Cat 3512E Marine Engine (Prefix SY3) Service Repair Manual Instan...Caterpillar Cat 3512E Marine Engine (Prefix SY3) Service Repair Manual Instan...
Caterpillar Cat 3512E Marine Engine (Prefix SY3) Service Repair Manual Instan...
 
Caterpillar Cat 3512B Industrial Engine (Prefix BR2) Service Repair Manual In...
Caterpillar Cat 3512B Industrial Engine (Prefix BR2) Service Repair Manual In...Caterpillar Cat 3512B Industrial Engine (Prefix BR2) Service Repair Manual In...
Caterpillar Cat 3512B Industrial Engine (Prefix BR2) Service Repair Manual In...
 
Caterpillar Cat 3512 Industrial Engine (Prefix SR2) Service Repair Manual Ins...
Caterpillar Cat 3512 Industrial Engine (Prefix SR2) Service Repair Manual Ins...Caterpillar Cat 3512 Industrial Engine (Prefix SR2) Service Repair Manual Ins...
Caterpillar Cat 3512 Industrial Engine (Prefix SR2) Service Repair Manual Ins...
 
Caterpillar Cat 988F Series II Wheel Loader (Prefix 2ZR) Service Repair Manua...
Caterpillar Cat 988F Series II Wheel Loader (Prefix 2ZR) Service Repair Manua...Caterpillar Cat 988F Series II Wheel Loader (Prefix 2ZR) Service Repair Manua...
Caterpillar Cat 988F Series II Wheel Loader (Prefix 2ZR) Service Repair Manua...
 
Caterpillar Cat 988B Wheel Loader (Prefix 50W) Service Repair Manual Instant ...
Caterpillar Cat 988B Wheel Loader (Prefix 50W) Service Repair Manual Instant ...Caterpillar Cat 988B Wheel Loader (Prefix 50W) Service Repair Manual Instant ...
Caterpillar Cat 988B Wheel Loader (Prefix 50W) Service Repair Manual Instant ...
 
Caterpillar Cat 988 988K XE Wheel Loader (Prefix E8X) Service Repair Manual I...
Caterpillar Cat 988 988K XE Wheel Loader (Prefix E8X) Service Repair Manual I...Caterpillar Cat 988 988K XE Wheel Loader (Prefix E8X) Service Repair Manual I...
Caterpillar Cat 988 988K XE Wheel Loader (Prefix E8X) Service Repair Manual I...
 
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
Caterpillar Cat 977K 977L TRACK LOADER (Prefix 11K) Service Repair Manual Ins...
 
Caterpillar Cat 953 TRACK LOADER (Prefix 05Z) Service Repair Manual Instant D...
Caterpillar Cat 953 TRACK LOADER (Prefix 05Z) Service Repair Manual Instant D...Caterpillar Cat 953 TRACK LOADER (Prefix 05Z) Service Repair Manual Instant D...
Caterpillar Cat 953 TRACK LOADER (Prefix 05Z) Service Repair Manual Instant D...
 
Caterpillar Cat 951B 951C TRACK LOADER (Prefix 32F) Service Repair Manual Ins...
Caterpillar Cat 951B 951C TRACK LOADER (Prefix 32F) Service Repair Manual Ins...Caterpillar Cat 951B 951C TRACK LOADER (Prefix 32F) Service Repair Manual Ins...
Caterpillar Cat 951B 951C TRACK LOADER (Prefix 32F) Service Repair Manual Ins...
 
Caterpillar Cat 943 TRACK LOADER (Prefix 19Z) Service Repair Manual Instant D...
Caterpillar Cat 943 TRACK LOADER (Prefix 19Z) Service Repair Manual Instant D...Caterpillar Cat 943 TRACK LOADER (Prefix 19Z) Service Repair Manual Instant D...
Caterpillar Cat 943 TRACK LOADER (Prefix 19Z) Service Repair Manual Instant D...
 

Recently uploaded

Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
Kenwood DDX71/491/471/371/3108/30718/271/2071 User ManualKenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
derekmelino
 
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceTop-Quality AC Service for Mini Cooper Optimal Cooling Performance
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Motor Haus
 
Dahua Security Camera System Guide esetia
Dahua Security Camera System Guide esetiaDahua Security Camera System Guide esetia
Dahua Security Camera System Guide esetia
Esentia Systems
 
欧洲杯竞猜-欧洲杯竞猜下注平台-欧洲杯竞猜投注平台|【​网址​🎉ac44.net🎉​】
欧洲杯竞猜-欧洲杯竞猜下注平台-欧洲杯竞猜投注平台|【​网址​🎉ac44.net🎉​】欧洲杯竞猜-欧洲杯竞猜下注平台-欧洲杯竞猜投注平台|【​网址​🎉ac44.net🎉​】
欧洲杯竞猜-欧洲杯竞猜下注平台-欧洲杯竞猜投注平台|【​网址​🎉ac44.net🎉​】
arcosarturo900
 
一比一原版皇家墨尔本理工大学毕业证(RMIT毕业证书)学历如何办理
一比一原版皇家墨尔本理工大学毕业证(RMIT毕业证书)学历如何办理一比一原版皇家墨尔本理工大学毕业证(RMIT毕业证书)学历如何办理
一比一原版皇家墨尔本理工大学毕业证(RMIT毕业证书)学历如何办理
pycfbo
 
EV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at Multifamily Properties by Kevin DonnellyEV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at Multifamily Properties by Kevin Donnelly
Forth
 
EV Charging at MFH Properties by Whitaker Jamieson
EV Charging at MFH Properties by Whitaker JamiesonEV Charging at MFH Properties by Whitaker Jamieson
EV Charging at MFH Properties by Whitaker Jamieson
Forth
 
How driver behavior monitoring helps fleet managers?
How driver behavior monitoring helps fleet managers?How driver behavior monitoring helps fleet managers?
How driver behavior monitoring helps fleet managers?
jennifermiller8137
 
原版定做(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭原版一模一样
原版定做(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭原版一模一样原版定做(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭原版一模一样
原版定做(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭原版一模一样
utuvvas
 
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinCharging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Forth
 
原版制作(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书一模一样
原版制作(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书一模一样原版制作(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书一模一样
原版制作(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书一模一样
g1inbfro
 
一比一原版南昆士兰大学毕业证(USQ毕业证书)学历如何办理
一比一原版南昆士兰大学毕业证(USQ毕业证书)学历如何办理一比一原版南昆士兰大学毕业证(USQ毕业证书)学历如何办理
一比一原版南昆士兰大学毕业证(USQ毕业证书)学历如何办理
pycfbo
 
Catalytic Converter theft prevention - NYC.pptx
Catalytic Converter theft prevention - NYC.pptxCatalytic Converter theft prevention - NYC.pptx
Catalytic Converter theft prevention - NYC.pptx
Blue Star Brothers
 
一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理
一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理
一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理
pycfbo
 
世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【​网址​🎉ac44.net🎉​】
世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【​网址​🎉ac44.net🎉​】世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【​网址​🎉ac44.net🎉​】
世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【​网址​🎉ac44.net🎉​】
ahmedendrise81
 
按照学校原版(UniSA文凭证书)南澳大学毕业证快速办理
按照学校原版(UniSA文凭证书)南澳大学毕业证快速办理按照学校原版(UniSA文凭证书)南澳大学毕业证快速办理
按照学校原版(UniSA文凭证书)南澳大学毕业证快速办理
ggany
 
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitExpanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Forth
 
car rentals in nassau bahamas | atv rental nassau bahamas
car rentals in nassau bahamas | atv rental nassau bahamascar rentals in nassau bahamas | atv rental nassau bahamas
car rentals in nassau bahamas | atv rental nassau bahamas
justinwilson0857
 
Infineon_AURIX_HSM Revealed_Training_Slides.pdf
Infineon_AURIX_HSM Revealed_Training_Slides.pdfInfineon_AURIX_HSM Revealed_Training_Slides.pdf
Infineon_AURIX_HSM Revealed_Training_Slides.pdf
maicuongdt21
 
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinCharging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Forth
 

Recently uploaded (20)

Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
Kenwood DDX71/491/471/371/3108/30718/271/2071 User ManualKenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
 
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceTop-Quality AC Service for Mini Cooper Optimal Cooling Performance
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
 
Dahua Security Camera System Guide esetia
Dahua Security Camera System Guide esetiaDahua Security Camera System Guide esetia
Dahua Security Camera System Guide esetia
 
欧洲杯竞猜-欧洲杯竞猜下注平台-欧洲杯竞猜投注平台|【​网址​🎉ac44.net🎉​】
欧洲杯竞猜-欧洲杯竞猜下注平台-欧洲杯竞猜投注平台|【​网址​🎉ac44.net🎉​】欧洲杯竞猜-欧洲杯竞猜下注平台-欧洲杯竞猜投注平台|【​网址​🎉ac44.net🎉​】
欧洲杯竞猜-欧洲杯竞猜下注平台-欧洲杯竞猜投注平台|【​网址​🎉ac44.net🎉​】
 
一比一原版皇家墨尔本理工大学毕业证(RMIT毕业证书)学历如何办理
一比一原版皇家墨尔本理工大学毕业证(RMIT毕业证书)学历如何办理一比一原版皇家墨尔本理工大学毕业证(RMIT毕业证书)学历如何办理
一比一原版皇家墨尔本理工大学毕业证(RMIT毕业证书)学历如何办理
 
EV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at Multifamily Properties by Kevin DonnellyEV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at Multifamily Properties by Kevin Donnelly
 
EV Charging at MFH Properties by Whitaker Jamieson
EV Charging at MFH Properties by Whitaker JamiesonEV Charging at MFH Properties by Whitaker Jamieson
EV Charging at MFH Properties by Whitaker Jamieson
 
How driver behavior monitoring helps fleet managers?
How driver behavior monitoring helps fleet managers?How driver behavior monitoring helps fleet managers?
How driver behavior monitoring helps fleet managers?
 
原版定做(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭原版一模一样
原版定做(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭原版一模一样原版定做(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭原版一模一样
原版定做(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭原版一模一样
 
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinCharging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
 
原版制作(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书一模一样
原版制作(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书一模一样原版制作(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书一模一样
原版制作(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书一模一样
 
一比一原版南昆士兰大学毕业证(USQ毕业证书)学历如何办理
一比一原版南昆士兰大学毕业证(USQ毕业证书)学历如何办理一比一原版南昆士兰大学毕业证(USQ毕业证书)学历如何办理
一比一原版南昆士兰大学毕业证(USQ毕业证书)学历如何办理
 
Catalytic Converter theft prevention - NYC.pptx
Catalytic Converter theft prevention - NYC.pptxCatalytic Converter theft prevention - NYC.pptx
Catalytic Converter theft prevention - NYC.pptx
 
一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理
一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理
一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理
 
世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【​网址​🎉ac44.net🎉​】
世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【​网址​🎉ac44.net🎉​】世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【​网址​🎉ac44.net🎉​】
世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【​网址​🎉ac44.net🎉​】
 
按照学校原版(UniSA文凭证书)南澳大学毕业证快速办理
按照学校原版(UniSA文凭证书)南澳大学毕业证快速办理按照学校原版(UniSA文凭证书)南澳大学毕业证快速办理
按照学校原版(UniSA文凭证书)南澳大学毕业证快速办理
 
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitExpanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
 
car rentals in nassau bahamas | atv rental nassau bahamas
car rentals in nassau bahamas | atv rental nassau bahamascar rentals in nassau bahamas | atv rental nassau bahamas
car rentals in nassau bahamas | atv rental nassau bahamas
 
Infineon_AURIX_HSM Revealed_Training_Slides.pdf
Infineon_AURIX_HSM Revealed_Training_Slides.pdfInfineon_AURIX_HSM Revealed_Training_Slides.pdf
Infineon_AURIX_HSM Revealed_Training_Slides.pdf
 
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinCharging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
 

Caterpillar Cat 977K 977L TRACK LOADER (Prefix 48J) Service Repair Manual Instant Download (48J00586-01058).pdf

  • 1. Product: TRACK LOADER Model: 977K TRACK LOADER 48J Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE) Disassembly and Assembly 3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001 Camshaft SMCS - 1210-11; 1210-12 Remove Camshaft start by: a) remove valve lifters b) remove timing gear cover 1. Turn the crankshaft until the "C" mark on the crankshaft gear is in alignment with the "C" mark on the camshaft gear. NOTE: To keep the engine timing correct during removal and installation of the camshaft, put a mark on the teeth of the idler gear and the camshaft gear at location (A). 2. Remove bolts (1) and remove camshaft gear (2). 3. Remove bolts, lock and washer (3). Remove camshaft (4). 1/2 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 2. Install Camshaft 1. Put clean SAE 30 oil on the lobes and bearing journals of the camshaft. 2. Install camshaft (1) in the block. 3. Install washer (2), lock and bolts that hold the camshaft in place. 4. Put the camshaft gear (3) in position on the camshaft so the "C" mark on the camshaft gear is in alignment with the "C" mark on the crankshaft gear. Install the bolts that hold the camshaft gear in place. NOTE: The drive gear will fit on the camshaft one way only. If necessary, turn the camshaft to make alignment of the holes of the drive gear and the camshaft. end by: a) install timing gear cover b) install valve lifters 2/2 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 3. Product: TRACK LOADER Model: 977K TRACK LOADER 48J Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE) Disassembly and Assembly 3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001 Timing Gears And Plate SMCS - 1162-11; 1162; 1206-12; 1206 Remove Timing Gears And Plate start by: a) remove timing gear cover 1. Put the engine in correct timing. See REMOVE FUEL INJECTION PUMP HOUSING AND GOVERNOR for this procedure. 2. Remove the bolt and washer that hold gear (1) and install tooling (C) on the end of the bolt. Install and tighten the bolt, washer and tooling (C) to hold the sleeve on the end of the fuel injection pump camshaft. 1/5 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 4. 3. Install tooling (A) on gear (1) and tighten the center bolt of tooling (A) until gear (1) is loosened. Remove tooling (B), the bolt, washers and gear (1). 4. Remove bolts (2), plate (4) and the idler gear (5). Remove bolts (3) and the washers to remove gear (6) from the camshaft. 5. Inspect the bearing in idler gear (5) for wear or damage. If a replacement of the bearing is needed, use tool group (B) to remove it from the gear as shown. 6. Remove the nuts and washers that hold the fuel injection pump housing to studs (7). 7. Remove the six bolts (8) and locks (9) that hold the timing gear plate to the cylinder block. Remove the timing gear plate and gasket from the engine. Install Timing Gears And Plate 2/5 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 5. 1. Install the timing gear plate and gasket. Install the two locks and six bolts. 2. Install the three nuts and washers that hold the fuel injection pump housing to the timing gear plate. 3. Install the camshaft drive gear. Make sure the "C" mark on the crankshaft gear is in alignment with the "C" mark on the camshaft drive gear. Install the four washers and bolts. 4. Use tool (B) to install the bearing in the idler gear. 5. Install idler gear (2). Install plate (3) and bolts (1). 6. Put the fuel injection pump drive gear in position on the fuel system. Install the bolt and washer that holds it finger tight only. 3/5 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 6. TYPICAL EXAMPLE 7. Install tooling (A) in the holes of the fuel injection pump drive gear as shown. Put a torque of approximately 50 lb.ft. (70 N·m) on the pump drive gear in a clockwise direction (as seen from the front of the engine). With the clockwise torque on the pump drive gear tighten the bolt to a torque of 110 ± 5 lb.ft. (149 ± 7 N·m). end by: a) install timing gear cover 4/5 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 7. 5/5 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 8. Product: TRACK LOADER Model: 977K TRACK LOADER 48J Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE) Disassembly and Assembly 3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001 Engine And Torque Converter SMCS - 1003-11; 1003-12 Remove Engine And Torque Converter start by: a) remove radiator and radiator guard b) remove rear crankcase guards * c) remove universal joint * d) remove air cleaner assembly * These operations are in the POWER TRAIN DISASSEMBLY AND ASSEMBLY section. 1. Drain the oil from the engine. 2. Drain oil from the torque converter. 3. Drain the oil from the hydraulic tank. 4. Turn the valve for the fuel supply to the "OFF" position. 5. Remove plate assemblies (1) and floor plates (2). 1/6 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 9. 6. Remove transmission and torque converter filter housing (3). Remove tube assembly (4). Disconnect hose assembly (5) from the top of the hydraulic pump. Disconnect the clip that holds the torque converter oil temperature sensing line to the torque converter. VIEW FROM UNDER MACHINE 7. Disconnect tube assembly (7) from the hydraulic pump. Disconnect hose assembly (6) from the torque converter inlet relief valve. Disconnect hose assembly (8) from the scavenge pump. Disconnect tube assembly (10) from the torque converter. Remove torque converter oil temperature sensing bulb (9) from the torque converter outlet relief valve. Remove tube assembly (11). 8. Disconnect two heater hoses (13) and remove water temperature sensing bulb (12). 2/6 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 10. 9. Disconnect governor control rod (14) from lever. Disconnect fuel line (15) from fuel filter base. NOTE: Put a mark on all wires before they are removed or disconnected for installation purpose. 10. Disconnect wiring harness (16) from the electric starting motor, alternator and glow plug wiring harness. 11. Disconnect two small tubes (19). Remove tube assemblies (17) and (18) and swivel joints. 12. Fasten a hoist to the engine. Remove bolt (20) from rear support on each side. Remove two bolts and nuts from front support. 13. Remove the engine (21) and torque converter from the machine. Weight of the engine and torque converter is 3000 lb. (1350 kg). 3/6 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 11. Install Engine And Torque Converter 1. Fasten a hoist to engine (1) and torque converter (2). Put the engine and torque converter in position on the frame of the machine. NOTICE Do not cause damage to any tubes, hoses or wires when the engine is put in position. 2. Install the rear support bolts. Tighten them to a torque of 200 ± 25 lb.ft. (270 ± 35 N·m). Install the front support bolts and nuts. 3. Install tube assemblies (3) and (4) and swivel joints. Connect two small tubes (5). 4. Connect wiring harness (7) to the electric starting motor, alternator and glow plug wiring harness. 5. Connect fuel line (8) to the fuel filter base. 4/6 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 12. 6. Connect governor control rod (6) to lever. 7. Install water temperature sensing bulb (9). 8. Connect two heater hoses (10). 9. Connect tube assembly (12) to the hydraulic pump. Connect hose assembly (11) to the torque converter inlet relief valve. Connect hose assembly (13) to the scavenge pump. Connect tube assembly (15) to the torque converter. Install torque converter oil temperature sensing bulb (14) to the torque converter outlet relief valve. Install tube assembly (16). 10. Install transmission and torque converter filter housing (19). Install tube assembly (17) to the torque converter and magnetic screen. Connect hose assembly (18) to the top of the hydraulic pump. Connect the clip that holds the torque converter oil temperature sensing line to the torque converter. 5/6 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 13. 11. Install floor plates (21) and plate assemblies (20). 12. Turn the valve for the fuel supply to the "ON" position. 13. Fill the engine with oil to the correct level. See LUBRICATION AND MAINTENANCE GUIDE. 14. Fill the transmission and bevel gear case with oil to the correct level. See LUBRICATION AND MAINTENANCE GUIDE. 15. Fill the hydraulic tank with oil to the correct level. See LUBRICATION AND MAINTENANCE GUIDE. end by: a) install universal joint * b) install rear crankcase guards * c) install radiator and radiator guard d) install air cleaner assembly * These operations are in the POWER TRAIN DISASSEMBLY AND ASSEMBLY section. 6/6 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 14. Product: TRACK LOADER Model: 977K TRACK LOADER 48J Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE) Disassembly and Assembly 3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001 Flywheel SMCS - 1156-11; 1156-12 Remove Flywheel start by: a remove engine and torque converter 1. Install a 5/8"-11 NC forged eyebolt to the torque converter. Fasten a hoist and remove ten bolts (1) that hold the torque converter to the flywheel housing. 1/3 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 15. 2. Install two 3/8"-16 NC forcing screws. Turn the forcing screws evenly until the torque converter is free of the flywheel housing. Remove torque converter (2). Weight of the torque converter is 450 lb. (204 kg). 3. Loosen the nine bolts that hold flywheel to the crankshaft. 4. Remove two bolts and install two 5/8"-18 NF guide bolts. Install tool (A) and remove the other bolts. Remove flywheel (3). Weight of the flywheel is 65 lb. (29 kg). 5. Remove gear (4) from the flywheel. Install Flywheel 1. Heat the ring gear to a maximum temperature of 600°F (316°C). Install ring gear (1) to the flywheel. 2. Install two 5/8"-18 NF guide bolts to the flange of the crankshaft. 2/3 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 16. 3. Use tool (A) and put flywheel (2) in position. Install the nine bolts that hold the flywheel to the crankshaft. 4. Fasten a hoist to torque converter (3) and put it in position. NOTE: Check the O-ring seal for damage. If the seal has damage, use a new part for replacement. 5. Install the ten bolts that hold the torque converter to the flywheel housing. end by: a) install engine and torque converter 3/3 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 17. Product: TRACK LOADER Model: 977K TRACK LOADER 48J Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE) Disassembly and Assembly 3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001 Crankshaft Rear Seal And Wear Sleeve SMCS - 1161-11; 1161-12 Remove Crankshaft Rear Seal And Wear Sleeve start by: a) remove flywheel NOTE: When a replacement of the rear seal is made, a replacement of the wear sleeve is to be made also. 1. Remove the crankshaft rear seal with tool (A). 1/3 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 18. 2. Install tool (C) in the rear seal bore. 3. Install tool (B) between tool (C) and the wear sleeve. Turn tool (B) until the edge of the tool makes a flat place (crease) in the wear sleeve. Do this in two or more places until the wear sleeve in loose. 4. Remove tool (C) and the wear sleeve by hand. Install Crankshaft Rear Seal And Wear Sleeve 1. Install the crankshaft rear seal and wear sleeve with tooling (A) as follows: a) Put locator (1) in position on the crankshaft and install the three bolts that hold it in place. 2/3 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 19. b) Put clean engine oil on the seal lip of seal (6) and on the outside diameter of wear sleeve (2). c) Install seal (6) on wear sleeve (2) from the end of the wear sleeve that has the bevel on the outside diameter. Make sure the lip of the seal is toward the inside of the engine and the bevel that is on the outside diameter of the wear sleeve is toward the outside of the engine when installed. d) Use 8M8060 Quick Cure Primer to clean the outside diameter of the crankshaft flange (3) and the inside diameter of wear sleeve (2). e) Put 9S3265 Retaining Compound on the outside diameter of crankshaft flange (3) and the inside diameter of wear sleeve (2). NOTE: Make sure the lip of the seal is toward the inside of the engine and the outside diameter bevel of the wear sleeve is toward the outside of the engine. f) Put wear sleeve (2) with seal (6) on locator (1). Put installer (4) on locator (1) and install nut (5). Put lubrication on the face of the washer and the nut. g) Tighten nut (5) until installer (4) comes in contact with locator (1). h) Remove tooling (A) and check the wear sleeve and seal for correct installation. end by: a) install flywheel 3/3 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 20. Product: TRACK LOADER Model: 977K TRACK LOADER 48J Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE) Disassembly and Assembly 3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001 Flywheel Housing SMCS - 1157-11 Remove Flywheel Housing start by: a) remove flywheel b) remove starter 1. Remove the bolts that hold the oil pan plate to the flywheel housing. Loosen the bolts that hold the oil pan plate to the cylinder block. 2. Fasten a hoist to the engine. Lift the engine and install shims (1) on each side of the engine between the cylinder block and the oil pan plate. 1/3 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 21. 3. Install tool (A) to the flywheel housing. Remove the thirteen bolts that hold the flywheel housing to the cylinder block. 4. Remove flywheel housing (2). The weight of the flywheel housing is 110 lb. (50 kg). Install Flywheel Housing 1. Clean the old gasket from the surfaces of the cylinder block and flywheel housing that make contact with each other. Install a new gasket on the cylinder block. 2. Install two 1/2"-13 NC guide bolts (1) in the cylinder block as shown. Install tooling (A) on the flywheel housing. Fasten a hoist and put the flywheel housing in position on the guide bolts. Install all but two bolts in the flywheel housing. Remove tooling (A) and the guide bolts. Install the other two bolts. 3. Cut the bottom of the gasket even with the flywheel housing and cylinder block. Put 5H2471 Gasket Cement on the bottom of the gasket where the gasket makes contact with the gasket for the oil pan plate. Remove shims (2) from each side of the engine. Tighten all of the oil pan bolts. Install the bolts that hold the oil pan plate to the flywheel housing. 2/3 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 22. end by: a) install starting motor b) install flywheel 3/3 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 23. Suggest: For more complete manuals. Please go to the home page. https://www.ebooklibonline.com If the above button click is invalid. Please download this document first, and then click the above link to download the complete manual. Thank you so much for reading
  • 24. Product: TRACK LOADER Model: 977K TRACK LOADER 48J Configuration: 977L TRAXCAVATOR 48J00586-01058 (MACHINE) Disassembly and Assembly 3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER Media Number -SENR7773-00 Publication Date -01/03/1978 Date Updated -12/10/2001 Camshaft Bearings SMCS - 1211-11; 1211-12 Remove Camshaft Bearings start by: a) remove oil pan plate b) remove timing gears and plate c) remove flywheel housing d) remove camshaft 1. Remove the camshaft bearings with tooling (A). Install Camshaft Bearings 1/3 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 25. 1. Install the camshaft bearings in the cylinder block with tooling (A). NOTE: Install all bearings with oil hole in bearing in alignment with oil hole in cylinder block. 2. The front and rear bearings are to be .06 in. (1.5 mm) inside the ends of the cylinder block after installation. end by: a) install camshaft b) install flywheel housing c) install timing gears and plate d) install oil pan plate 2/3 977L TRAXCAVATOR 48J00586-01058 (MACHINE)(UEH0574S - 00) - Document... 2021/10/19 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...