Car parts
•Download as PPTX, PDF•
0 likes•329 views
The document defines key car parts including the body, chassis, drive shaft, axle, and transmission. The body is the outer covering of the car. The chassis is the frame that supports the body and working parts. The drive shaft transmits power or motion via a revolving rod. The axle is the bar around which the wheels turn. The transmission carries power from the engine to the wheels.
Report
Share
Report
Share
Recommended
The Advantages and Disadvantages of Front Wheel Drive vs. Rear Wheel Drive
According to the Mantrans professionals, both the automobile technologies grew up on their own path and have distinct advantages. Hence, it is difficult to answer which of the transmission is better. In this article, one can find some of the pros and cons of the front wheel and rear wheel drive transmission.
STEERING GEAR MECHANISMS (kinematics of machines)
The steering gear mechanism turns the front wheels of a vehicle to change its direction while keeping the back wheels straight. An Ackerman steering gear is an exact mechanism that fulfills the steering condition to avoid skidding by ensuring the front wheels turn about the same instantaneous center, which lies on the axis of the fixed back wheels. Compared to the Davis mechanism, the Ackerman mechanism has the whole steering assembly behind the front wheels rather than in front, and uses turning pairs rather than sliding pairs.
Unit 1 Introduction to automobile and drive train
This document provides an overview of the syllabus for an Automobile Engineering course. The syllabus covers 6 units: introduction and drive train, axles wheels and tires, steering system, suspension and brake system, vehicle performance and safety, electrical system and vehicle maintenance, and electric and hybrid electric vehicles. Unit 1 provides details on the contents which will be covered, including introduction to automobiles, chassis and frames, and drive train. The drive train section will cover transmission systems, clutches, gearboxes, propeller shafts, differentials and final drive. References for the course are also provided.
Capstone Project Final Presentation
This document summarizes a student's final presentation on a design project to enable paraplegics to safely and independently mount and dismount horses. The design was a lifting platform attached to a horse trailer that raises and lowers using tracks. It met requirements like supporting 260 pounds, operating from a battery, and conforming to ADA standards. Testing showed it lifted 46.5 inches vertically and moved 15 inches horizontally while maintaining a safety factor above 5. However, it did not meet the noise level requirement. The completed design cost $10,715, exceeding the $10,000 budget.
7 steering mechanisms
This document discusses steering mechanisms for vehicles. It describes the condition for true rolling as having an instantaneous center where the front wheel axes meet the rear axis when turning. This requires the inner wheel to turn through a greater angle than the outer wheel. The main types of steering mechanisms are the Ackerman and Davis systems. The Ackerman mechanism is most widely used due to its simplicity and ability to achieve true rolling through an instantaneous center point between the wheel axes. It has turning pairs behind the wheels while the Davis mechanism has sliding pairs in front of the wheels and is more prone to wear.
Automobile- drive systems
automobile drives systems
types of drive systems
front engine front wheel drive
front engine rear wheel drive
rear engine rear wheel drive
four wheel drive
Automotive Wheel Bearings & Wheel Hubs 101
Wheel bearings and hubs are important components that connect a vehicle's wheels to its suspension and braking systems. Wheel bearings can fail due to normal wear, dirt contamination, or improper installation torque. When wheel bearings fail, they make a whirring noise and excess play develops. Over time, this damages the bearing and leads to failure. Replacing wheel bearings before failure is ideal. Hubs connect wheels to vehicles and often come assembled with bearings for easier replacement. ABS sensors may be mounted on hubs or axles to monitor wheel speed. The document provides guidance on wheel bearing and hub replacement.
NAGARAJ GONI PRESENTATION ABOUT AUTO SUSPENTION.
The document discusses vehicle suspension components and geometry. It introduces common suspension types like solid axle, double wishbone, and MacPherson strut. It defines key suspension terminology like sprung mass, bump, roll, pitch, camber, and toe. It also compares advantages and disadvantages of different suspension designs and how their geometry can be tuned or adjusted.
Recommended
The Advantages and Disadvantages of Front Wheel Drive vs. Rear Wheel Drive
According to the Mantrans professionals, both the automobile technologies grew up on their own path and have distinct advantages. Hence, it is difficult to answer which of the transmission is better. In this article, one can find some of the pros and cons of the front wheel and rear wheel drive transmission.
STEERING GEAR MECHANISMS (kinematics of machines)
The steering gear mechanism turns the front wheels of a vehicle to change its direction while keeping the back wheels straight. An Ackerman steering gear is an exact mechanism that fulfills the steering condition to avoid skidding by ensuring the front wheels turn about the same instantaneous center, which lies on the axis of the fixed back wheels. Compared to the Davis mechanism, the Ackerman mechanism has the whole steering assembly behind the front wheels rather than in front, and uses turning pairs rather than sliding pairs.
Unit 1 Introduction to automobile and drive train
This document provides an overview of the syllabus for an Automobile Engineering course. The syllabus covers 6 units: introduction and drive train, axles wheels and tires, steering system, suspension and brake system, vehicle performance and safety, electrical system and vehicle maintenance, and electric and hybrid electric vehicles. Unit 1 provides details on the contents which will be covered, including introduction to automobiles, chassis and frames, and drive train. The drive train section will cover transmission systems, clutches, gearboxes, propeller shafts, differentials and final drive. References for the course are also provided.
Capstone Project Final Presentation
This document summarizes a student's final presentation on a design project to enable paraplegics to safely and independently mount and dismount horses. The design was a lifting platform attached to a horse trailer that raises and lowers using tracks. It met requirements like supporting 260 pounds, operating from a battery, and conforming to ADA standards. Testing showed it lifted 46.5 inches vertically and moved 15 inches horizontally while maintaining a safety factor above 5. However, it did not meet the noise level requirement. The completed design cost $10,715, exceeding the $10,000 budget.
7 steering mechanisms
This document discusses steering mechanisms for vehicles. It describes the condition for true rolling as having an instantaneous center where the front wheel axes meet the rear axis when turning. This requires the inner wheel to turn through a greater angle than the outer wheel. The main types of steering mechanisms are the Ackerman and Davis systems. The Ackerman mechanism is most widely used due to its simplicity and ability to achieve true rolling through an instantaneous center point between the wheel axes. It has turning pairs behind the wheels while the Davis mechanism has sliding pairs in front of the wheels and is more prone to wear.
Automobile- drive systems
automobile drives systems
types of drive systems
front engine front wheel drive
front engine rear wheel drive
rear engine rear wheel drive
four wheel drive
Automotive Wheel Bearings & Wheel Hubs 101
Wheel bearings and hubs are important components that connect a vehicle's wheels to its suspension and braking systems. Wheel bearings can fail due to normal wear, dirt contamination, or improper installation torque. When wheel bearings fail, they make a whirring noise and excess play develops. Over time, this damages the bearing and leads to failure. Replacing wheel bearings before failure is ideal. Hubs connect wheels to vehicles and often come assembled with bearings for easier replacement. ABS sensors may be mounted on hubs or axles to monitor wheel speed. The document provides guidance on wheel bearing and hub replacement.
NAGARAJ GONI PRESENTATION ABOUT AUTO SUSPENTION.
The document discusses vehicle suspension components and geometry. It introduces common suspension types like solid axle, double wishbone, and MacPherson strut. It defines key suspension terminology like sprung mass, bump, roll, pitch, camber, and toe. It also compares advantages and disadvantages of different suspension designs and how their geometry can be tuned or adjusted.
Four-wheel drive
This document discusses four-wheel drive (4WD) vehicles. It describes the main advantages as improved traction and handling from being able to transmit torque to all four wheels. The disadvantages include higher initial costs and weight as well as requiring special service and maintenance. The document defines different 4WD systems such as part-time 4WD which operates in two-wheel drive normally but can engage 4WD, full-time 4WD which constantly powers all four wheels, and on-demand 4WD which automatically engages the front wheels when slip is detected. It provides details on 4WD components, transfer cases, differentials, and maintenance tips.
Steering
This document discusses key terms and concepts related to steering system design, including camber, caster, directional stability, geometric centerline, toe, parallelism, and Ackerman steering. It provides definitions and explanations of these terms. For example, it explains that caster provides directional stability and the ability of wheels to return to the straight ahead position after a turn. It also discusses various steering system types like rack and pinion steering and their advantages and disadvantages.
H&p railcar movers
Heyl & Patterson offers train positioners and railcar movers that can precisely move individual railcars or entire trains of up to 200 cars without a locomotive. Train positioners use positioning arms to engage the couplers of each railcar, moving them into place and activating wheel chocks for loading or unloading. They can be installed at the entry or exit end of a station and operated automatically, semi-automatically, or manually. The compact CUBTM railcar mover is designed for moving single cars or small groups of cars and requires low maintenance and investment for small to mid-sized applications.
Br
This document is a seminar report on four wheel steering systems presented by Ganjave Babasaheb Revraji at Amrutvahini Polytechnic in 2013-2014. The report begins with an introduction and acknowledgements. It then provides an abstract stating that four wheel steering systems aim to provide smooth vehicle turning. The report is divided into chapters covering four wheel steering, types of four wheel steering including active, passive, crab and rear wheel steering. It also discusses wheeled vehicle steering mechanisms such as rack and pinion, recirculating ball, and worm and sector systems. Applications of four wheel steering and references are listed at the end.
Automotive training
The document discusses various options for automotive training and certification, including factory-specific training through programs like Honda's PACT, general seminars offered by companies, and community college programs. It also describes ASE certification, a widely-recognized certification for automotive technicians that is tested in different areas like engine repair, brakes, and electrical systems. ASE certification requires passing a written test and having relevant work experience, though education can count towards the experience requirement.
2b9fc module iii steering system_ part-ii (2)
The document discusses steering systems and components. It describes steering linkages used in vehicles with rigid axle front suspensions and independent front suspensions. It also discusses different types of steering gears like rack and pinion gears, and how power steering systems and electronic power steering systems work. It provides details on Davis steering mechanism and Ackerman steering mechanism.
Steering system in automobile
This document discusses the history and components of automobile steering systems. It describes how early steering systems worked by pulling horse reins to turn buggy wheels. Later, systems were developed using linkages to connect the steering wheel to front wheels. Modern systems use power steering assisted by hydraulic or electric motors. Key components include the steering wheel, column, gear, rack and pinion, and linkages connecting to front knuckles to enable turning. Power steering greatly reduces steering effort for drivers.
Four wheel steering mechanism
This presentation discusses four wheel steering mechanisms. It introduces different types of steering systems such as front wheel, rear wheel, and four wheel steering. It then explains the basic geometry and principles of four wheel steering including Ackermann steering geometry. The components of a four wheel steering system are listed as the chassis, tires, mechanical linkage, differential, and propeller shaft. Finally, it notes that four wheel steering improves steering response and vehicle stability at high speeds, and decreases turning radius at low speeds. Applications mentioned include racing vehicles and future vehicles.
Wheel bearings
Wheel bearings allow wheels to rotate freely and accurately hold the brake discs or drums. Most common wheel bearings are tapered roller bearings or ball bearings, which are lubricated with grease. Hub and wheel bearings are used on non-driving and driving wheels. On non-driving wheels, the spindle is stationary and the hub is greased to lubricate the bearings. On driving wheels, the axle shaft rotates inside a stationary support and the hub is splined to the axle shaft. Four-wheel drive systems use a locking hub mechanism to transfer power between the front axle and hub. Lack of lubrication in wheel bearings can cause noise, roughness, or looseness due to
Introduction to Automobile
This document introduces automobiles and their components. It categorizes automobiles based on their purpose, load capacity, fuel used, and drive type. The basic components of automobiles discussed include the power plant, transmission system, auxiliaries, controls, and superstructure. Automobile body constructions can be framed, frameless, or unitized. Modern automobiles include various safety features like airbags, ABS, and rearview cameras.
SYNOPSIS fOR FOUR WHEEL STEERING SYSTEM (MECHANICAL ENGG.)
This document provides details about a final year project to design and fabricate a four-wheel steering system. The project aims to reduce the turning radius of a vehicle to improve maneuverability. It will be developed over 6 months with a budget of 20,000 Rs. and a team of 5 members. The project leader's role is fabrication. Existing systems only steer the front wheels, while this project will steer all four wheels to enhance stability, response, and tight space maneuvers compared to conventional two-wheel steering. Design software like AutoCAD and Pro-E will be used, along with machinery like lathes and welding equipment. Requirements include access to workshop facilities for machining and assembly.
Industry
The document provides an overview of the automotive industry, including:
1) It describes the key systems of a vehicle like the engine, drivetrain, chassis, and gives examples of components that make up each system.
2) It explains the different types of repair facilities like dealerships, independent shops, and lube chains and outlines the pros and cons of each.
3) It provides a high-level overview of how new vehicles flow from the manufacturing plant to dealerships where they are inspected and prepared for sale.
A.e. unit 1 introduction & vehicle layout
A.e. unit 1 introduction & vehicle layoutMatoshri Pratishthan's Vishwabharti Polytechnic Institute, Nanded
The document provides an overview of automobiles and automobile power plants. It discusses the classification of automobiles based on use, capacity, make, fuel used, body style, wheels, drive, and transmission. The major components of an automobile including the frame, suspension, power plant, transmission system, electrical system, and control systems are described. Different automobile layouts such as front-engine rear-wheel drive, rear-engine rear-wheel drive, and front-engine front-wheel drive are summarized. Safety features in cars like seat belts, air bags, anti-lock brakes, and electronic stability control are highlighted. Different types of automobile power plants including internal combustion engines, electrical vehicles, fuel cells, and hybrid systems areSuspension system
The suspension system connects a vehicle to its wheels and serves two main purposes - contributing to handling and braking safety while also providing a comfortable ride by isolating the vehicle from road bumps and noise. An effective suspension balances these goals. Most modern vehicles use independent front and rear suspension systems with springs, shock absorbers, and linkages to enable each wheel to move independently without affecting the others, improving both ride and handling. The suspension aims to separate the energy of vertical wheel movements from the vehicle body.
Project presention on four wheels steering system by PARVIND GUPTA
In this project there are participated four member at college SKYLINE INSTITUTE GREATER NOIDA
About the Project: With the help of this system all four wheels can be turned to any direction with the steering. This can controlled more effectively & also speed of vehicle can be increased & decreased as per requirements.
3 automotive chassis-design-v2
This document discusses the design of vehicle chassis systems. It covers several key load cases including bending, torsion, combined bending and torsion, lateral loading, and longitudinal loading. It also discusses different chassis types such as ladder frames, cruciform frames, torque tube backbone frames, and integral structures. Analysis methods like the simple structural surfaces method are introduced for evaluating load distributions and stresses in vehicle chassis designs.
What are the Signs of Volvo XC90 Bad Drive Shaft in Phoenix
In general, the driveshaft is a rod-like component in your Volvo XC90 that is used for transmitting the torque from your vehicle's engine to the wheels. Moreover, it can transmit the torque at varying angles between the driveline components as well as it is comprised of several components. When the drive shaft is failed, you will notice various signs in the Volvo XC90 given in the following slide.
Suspensions
This document discusses vehicle suspension systems. It introduces suspensions and their main components like springs and dampers. It describes common spring types like coil springs and leaf springs. It also explains dampers and how they dissipate energy. A key part of the document focuses on struts, particularly the MacPherson strut, detailing its assembly, advantages like being cheaper and lighter, and disadvantages such as added height. Examples are given of some of the first cars to use MacPherson struts as well as modern cars that employ them.
2015 Mitsubishi Lancer eBrochure
This document provides an overview of the 2015 Mitsubishi Lancer. It highlights the Lancer's distinctive styling, performance features, safety technologies, and the company's belief in building vehicles for drivers who want something different than mainstream options. The summary discusses the Lancer's focus on performance while still providing comfort and efficiency.
AUTOMONBILE CHASSIS & BODY ENGINEERING
This document provides an overview of the contents of a textbook on automobile chassis and body engineering. The textbook covers topics such as chassis frames, steering systems, braking systems, suspension systems, and seats, doors and windows. It also addresses legal aspects of motor vehicles, automobile pollution, and painting of automobiles. The textbook is intended for vocational and diploma students of mechanical engineering. It includes chapters on chassis frames and bodies, steering systems, braking systems, and suspension systems. Each chapter provides explanations of the components, functions, requirements and types within each system.
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Stack Memory Organization of 8086 Microprocessor
The stack memory organization of 8086 microprocessor.
More Related Content
What's hot
Four-wheel drive
This document discusses four-wheel drive (4WD) vehicles. It describes the main advantages as improved traction and handling from being able to transmit torque to all four wheels. The disadvantages include higher initial costs and weight as well as requiring special service and maintenance. The document defines different 4WD systems such as part-time 4WD which operates in two-wheel drive normally but can engage 4WD, full-time 4WD which constantly powers all four wheels, and on-demand 4WD which automatically engages the front wheels when slip is detected. It provides details on 4WD components, transfer cases, differentials, and maintenance tips.
Steering
This document discusses key terms and concepts related to steering system design, including camber, caster, directional stability, geometric centerline, toe, parallelism, and Ackerman steering. It provides definitions and explanations of these terms. For example, it explains that caster provides directional stability and the ability of wheels to return to the straight ahead position after a turn. It also discusses various steering system types like rack and pinion steering and their advantages and disadvantages.
H&p railcar movers
Heyl & Patterson offers train positioners and railcar movers that can precisely move individual railcars or entire trains of up to 200 cars without a locomotive. Train positioners use positioning arms to engage the couplers of each railcar, moving them into place and activating wheel chocks for loading or unloading. They can be installed at the entry or exit end of a station and operated automatically, semi-automatically, or manually. The compact CUBTM railcar mover is designed for moving single cars or small groups of cars and requires low maintenance and investment for small to mid-sized applications.
Br
This document is a seminar report on four wheel steering systems presented by Ganjave Babasaheb Revraji at Amrutvahini Polytechnic in 2013-2014. The report begins with an introduction and acknowledgements. It then provides an abstract stating that four wheel steering systems aim to provide smooth vehicle turning. The report is divided into chapters covering four wheel steering, types of four wheel steering including active, passive, crab and rear wheel steering. It also discusses wheeled vehicle steering mechanisms such as rack and pinion, recirculating ball, and worm and sector systems. Applications of four wheel steering and references are listed at the end.
Automotive training
The document discusses various options for automotive training and certification, including factory-specific training through programs like Honda's PACT, general seminars offered by companies, and community college programs. It also describes ASE certification, a widely-recognized certification for automotive technicians that is tested in different areas like engine repair, brakes, and electrical systems. ASE certification requires passing a written test and having relevant work experience, though education can count towards the experience requirement.
2b9fc module iii steering system_ part-ii (2)
The document discusses steering systems and components. It describes steering linkages used in vehicles with rigid axle front suspensions and independent front suspensions. It also discusses different types of steering gears like rack and pinion gears, and how power steering systems and electronic power steering systems work. It provides details on Davis steering mechanism and Ackerman steering mechanism.
Steering system in automobile
This document discusses the history and components of automobile steering systems. It describes how early steering systems worked by pulling horse reins to turn buggy wheels. Later, systems were developed using linkages to connect the steering wheel to front wheels. Modern systems use power steering assisted by hydraulic or electric motors. Key components include the steering wheel, column, gear, rack and pinion, and linkages connecting to front knuckles to enable turning. Power steering greatly reduces steering effort for drivers.
Four wheel steering mechanism
This presentation discusses four wheel steering mechanisms. It introduces different types of steering systems such as front wheel, rear wheel, and four wheel steering. It then explains the basic geometry and principles of four wheel steering including Ackermann steering geometry. The components of a four wheel steering system are listed as the chassis, tires, mechanical linkage, differential, and propeller shaft. Finally, it notes that four wheel steering improves steering response and vehicle stability at high speeds, and decreases turning radius at low speeds. Applications mentioned include racing vehicles and future vehicles.
Wheel bearings
Wheel bearings allow wheels to rotate freely and accurately hold the brake discs or drums. Most common wheel bearings are tapered roller bearings or ball bearings, which are lubricated with grease. Hub and wheel bearings are used on non-driving and driving wheels. On non-driving wheels, the spindle is stationary and the hub is greased to lubricate the bearings. On driving wheels, the axle shaft rotates inside a stationary support and the hub is splined to the axle shaft. Four-wheel drive systems use a locking hub mechanism to transfer power between the front axle and hub. Lack of lubrication in wheel bearings can cause noise, roughness, or looseness due to
Introduction to Automobile
This document introduces automobiles and their components. It categorizes automobiles based on their purpose, load capacity, fuel used, and drive type. The basic components of automobiles discussed include the power plant, transmission system, auxiliaries, controls, and superstructure. Automobile body constructions can be framed, frameless, or unitized. Modern automobiles include various safety features like airbags, ABS, and rearview cameras.
SYNOPSIS fOR FOUR WHEEL STEERING SYSTEM (MECHANICAL ENGG.)
This document provides details about a final year project to design and fabricate a four-wheel steering system. The project aims to reduce the turning radius of a vehicle to improve maneuverability. It will be developed over 6 months with a budget of 20,000 Rs. and a team of 5 members. The project leader's role is fabrication. Existing systems only steer the front wheels, while this project will steer all four wheels to enhance stability, response, and tight space maneuvers compared to conventional two-wheel steering. Design software like AutoCAD and Pro-E will be used, along with machinery like lathes and welding equipment. Requirements include access to workshop facilities for machining and assembly.
Industry
The document provides an overview of the automotive industry, including:
1) It describes the key systems of a vehicle like the engine, drivetrain, chassis, and gives examples of components that make up each system.
2) It explains the different types of repair facilities like dealerships, independent shops, and lube chains and outlines the pros and cons of each.
3) It provides a high-level overview of how new vehicles flow from the manufacturing plant to dealerships where they are inspected and prepared for sale.
A.e. unit 1 introduction & vehicle layout
A.e. unit 1 introduction & vehicle layoutMatoshri Pratishthan's Vishwabharti Polytechnic Institute, Nanded
The document provides an overview of automobiles and automobile power plants. It discusses the classification of automobiles based on use, capacity, make, fuel used, body style, wheels, drive, and transmission. The major components of an automobile including the frame, suspension, power plant, transmission system, electrical system, and control systems are described. Different automobile layouts such as front-engine rear-wheel drive, rear-engine rear-wheel drive, and front-engine front-wheel drive are summarized. Safety features in cars like seat belts, air bags, anti-lock brakes, and electronic stability control are highlighted. Different types of automobile power plants including internal combustion engines, electrical vehicles, fuel cells, and hybrid systems areSuspension system
The suspension system connects a vehicle to its wheels and serves two main purposes - contributing to handling and braking safety while also providing a comfortable ride by isolating the vehicle from road bumps and noise. An effective suspension balances these goals. Most modern vehicles use independent front and rear suspension systems with springs, shock absorbers, and linkages to enable each wheel to move independently without affecting the others, improving both ride and handling. The suspension aims to separate the energy of vertical wheel movements from the vehicle body.
Project presention on four wheels steering system by PARVIND GUPTA
In this project there are participated four member at college SKYLINE INSTITUTE GREATER NOIDA
About the Project: With the help of this system all four wheels can be turned to any direction with the steering. This can controlled more effectively & also speed of vehicle can be increased & decreased as per requirements.
3 automotive chassis-design-v2
This document discusses the design of vehicle chassis systems. It covers several key load cases including bending, torsion, combined bending and torsion, lateral loading, and longitudinal loading. It also discusses different chassis types such as ladder frames, cruciform frames, torque tube backbone frames, and integral structures. Analysis methods like the simple structural surfaces method are introduced for evaluating load distributions and stresses in vehicle chassis designs.
What are the Signs of Volvo XC90 Bad Drive Shaft in Phoenix
In general, the driveshaft is a rod-like component in your Volvo XC90 that is used for transmitting the torque from your vehicle's engine to the wheels. Moreover, it can transmit the torque at varying angles between the driveline components as well as it is comprised of several components. When the drive shaft is failed, you will notice various signs in the Volvo XC90 given in the following slide.
Suspensions
This document discusses vehicle suspension systems. It introduces suspensions and their main components like springs and dampers. It describes common spring types like coil springs and leaf springs. It also explains dampers and how they dissipate energy. A key part of the document focuses on struts, particularly the MacPherson strut, detailing its assembly, advantages like being cheaper and lighter, and disadvantages such as added height. Examples are given of some of the first cars to use MacPherson struts as well as modern cars that employ them.
2015 Mitsubishi Lancer eBrochure
This document provides an overview of the 2015 Mitsubishi Lancer. It highlights the Lancer's distinctive styling, performance features, safety technologies, and the company's belief in building vehicles for drivers who want something different than mainstream options. The summary discusses the Lancer's focus on performance while still providing comfort and efficiency.
AUTOMONBILE CHASSIS & BODY ENGINEERING
This document provides an overview of the contents of a textbook on automobile chassis and body engineering. The textbook covers topics such as chassis frames, steering systems, braking systems, suspension systems, and seats, doors and windows. It also addresses legal aspects of motor vehicles, automobile pollution, and painting of automobiles. The textbook is intended for vocational and diploma students of mechanical engineering. It includes chapters on chassis frames and bodies, steering systems, braking systems, and suspension systems. Each chapter provides explanations of the components, functions, requirements and types within each system.
What's hot (20)
SYNOPSIS fOR FOUR WHEEL STEERING SYSTEM (MECHANICAL ENGG.)
SYNOPSIS fOR FOUR WHEEL STEERING SYSTEM (MECHANICAL ENGG.)
Project presention on four wheels steering system by PARVIND GUPTA
Project presention on four wheels steering system by PARVIND GUPTA
What are the Signs of Volvo XC90 Bad Drive Shaft in Phoenix
What are the Signs of Volvo XC90 Bad Drive Shaft in Phoenix
Recently uploaded
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Stack Memory Organization of 8086 Microprocessor
The stack memory organization of 8086 microprocessor.
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as discipline
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
The recent surge in pro-Palestine student activism has prompted significant responses from universities, ranging from negotiations and divestment commitments to increased transparency about investments in companies supporting the war on Gaza. This activism has led to the cessation of student encampments but also highlighted the substantial sacrifices made by students, including academic disruptions and personal risks. The primary drivers of these protests are poor university administration, lack of transparency, and inadequate communication between officials and students. This study examines the profound emotional, psychological, and professional impacts on students engaged in pro-Palestine protests, focusing on Generation Z's (Gen-Z) activism dynamics. This paper explores the significant sacrifices made by these students and even the professors supporting the pro-Palestine movement, with a focus on recent global movements. Through an in-depth analysis of printed and electronic media, the study examines the impacts of these sacrifices on the academic and personal lives of those involved. The paper highlights examples from various universities, demonstrating student activism's long-term and short-term effects, including disciplinary actions, social backlash, and career implications. The researchers also explore the broader implications of student sacrifices. The findings reveal that these sacrifices are driven by a profound commitment to justice and human rights, and are influenced by the increasing availability of information, peer interactions, and personal convictions. The study also discusses the broader implications of this activism, comparing it to historical precedents and assessing its potential to influence policy and public opinion. The emotional and psychological toll on student activists is significant, but their sense of purpose and community support mitigates some of these challenges. However, the researchers call for acknowledging the broader Impact of these sacrifices on the future global movement of FreePalestine.
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"National Information Standards Organization (NISO)
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف أحرف الخلاف للقراء العشرةأعد أحرف الخلاف بالتلوين وصلا سمير بسيوني غفر الله له
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Benner "Expanding Pathways to Publishing Careers"
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
How Barcodes Can Be Leveraged Within Odoo 17
In this presentation, we will explore how barcodes can be leveraged within Odoo 17 to streamline our manufacturing processes. We will cover the configuration steps, how to utilize barcodes in different manufacturing scenarios, and the overall benefits of implementing this technology.
Recently uploaded (20)
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
Car parts
- 1. Car Parts BODY the frame or te outer covering
- 2. CHASSIS Theframeonwhich te body and workingparts of car are fastenedorbuilt
- 3. DRIVE SHAFT A revolvingrodthattransmitspowerormotion
- 4. AXLE A bar aroundwhich te wheels turn
- 5. TRANSMISSION Ir carries poder Fromm te engina tú te wheels