Cannabisativine
•Download as PPTX, PDF•
1 like•579 views
This document appears to be a report from Dr. Fikret Koc of the Chemistry Department summarizing the work of a student, Nabeel B Azeez, involving the synthesis of organic compounds including diols, carbamates, dihydropyridones, selenides, thiocarbamates, acetals, aminodiols and lactams through reactions such as Michael additions and manipulations of functional groups. The student synthesized a variety of complex organic molecules and intermediates for further use in organic chemistry.
Report
Share
Report
Share
Recommended
Determination of 2 and 4(5)-methylimidazole - Zhi - Presentation slides
This document describes a study that developed a capillary electrophoresis method to analyze levels of 2-methylimidazole (2-MI) and 4(5)-methylimidazole (4-MI) in foods and beverages. The method was able to detect 2-MI and 4-MI in soft drinks but detection in sauces was difficult due to complexity. Calibration curves were generated and limits of detection and quantification were determined. The method was then used to quantify 2-MI and 4-MI in several products, finding some contained levels while others did not. Future work proposed using extraction and CE/MS methods to improve analysis in complex food matrices.
Fungal pretreatment of lignocellulosic biomass
Fungal pretreatment is a biological pretreatment method that has several advantages over physical and chemical pretreatment methods. It uses lignin-degrading fungi like white-rot fungi to degrade lignin through oxidative enzymes. This breaks down the structure of lignocellulose and increases accessibility for downstream processing like enzymatic hydrolysis. The key advantages are that it is a simple and low-energy technique that avoids forming fermentation inhibitors and waste streams while reducing costs. White-rot fungi are most effective as they can completely mineralize lignin using oxidative enzymes like lignin peroxidase, manganese peroxidase, and laccases. Factors like moisture content, temperature, and pretreatment time must be optimized for effective fungal pretreatment of
vitaminb12
Vitamin B12, also known as Cobalamin, is a water-soluble vitamin that plays a key role in the functioning of the nervous system and the formation of red blood cells. It is produced by microorganisms through fermentation and cannot be synthesized by animals or plants. The document discusses the industrial production process of vitamin B12 through bacterial fermentation using various microorganisms like Streptomyces and Propionibacterium. The production process involves growing the microorganisms in nutrient media under controlled conditions, followed by downstream processing steps like filtration, extraction, and crystallization to isolate vitamin B12.
The International Journal of Engineering and Science (The IJES)
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
pretreatment methods for manufacture of biogas from agricutural wastes
An insight into the various pretreatment methods applied to the raw wastes before the preparation of biogas
Biodegradable synthetic fibre from corn
The document discusses the development of a new biodegradable synthetic fiber made from polylactic acid (PLA), which is synthesized from renewable corn rather than fossil fuels. PLA fiber addresses issues of depleting resources and non-biodegradable synthetic fibers. PLA fiber has properties suitable for textiles, packaging, and other applications. It can be processed like conventional synthetics but is renewable and fully biodegradable, offering environmental benefits over existing fibers. The production process involves fermenting corn into lactic acid and polymerizing it into PLA fiber through established textile processes.
Berberine and Berberine derivatives
This document discusses 17 different structure modifications made to berberine and their resulting medicinal attributes. Some key modifications include adding dehydro groups to create antiprotozoal derivatives, adding benzyl groups to make antibacterial and antifungal derivatives, and adding lipophilic groups to yield hypoglycemic agents. The modifications allow berberine derivatives to exhibit various therapeutic effects such as inhibiting acetylcholinesterase, acting as anti-cancer agents, and treating conditions like leishmaniasis, malaria, and trypanosomiasis.
Bacterial Cellulose presentation
Bacterial cellulose is produced by certain bacteria through a four step process: strain selection, culture medium preparation, cultivation, and downstream processing. The conventional culture medium contains glucose, peptone and yeast extract. Recent studies have shown that adding ethanol and acetic acid to this medium can improve bacterial cellulose yield up to 279%. Bacterial cellulose has many applications including use in facial masks, food packaging, biomedical devices, and artificial meat.
Recommended
Determination of 2 and 4(5)-methylimidazole - Zhi - Presentation slides
This document describes a study that developed a capillary electrophoresis method to analyze levels of 2-methylimidazole (2-MI) and 4(5)-methylimidazole (4-MI) in foods and beverages. The method was able to detect 2-MI and 4-MI in soft drinks but detection in sauces was difficult due to complexity. Calibration curves were generated and limits of detection and quantification were determined. The method was then used to quantify 2-MI and 4-MI in several products, finding some contained levels while others did not. Future work proposed using extraction and CE/MS methods to improve analysis in complex food matrices.
Fungal pretreatment of lignocellulosic biomass
Fungal pretreatment is a biological pretreatment method that has several advantages over physical and chemical pretreatment methods. It uses lignin-degrading fungi like white-rot fungi to degrade lignin through oxidative enzymes. This breaks down the structure of lignocellulose and increases accessibility for downstream processing like enzymatic hydrolysis. The key advantages are that it is a simple and low-energy technique that avoids forming fermentation inhibitors and waste streams while reducing costs. White-rot fungi are most effective as they can completely mineralize lignin using oxidative enzymes like lignin peroxidase, manganese peroxidase, and laccases. Factors like moisture content, temperature, and pretreatment time must be optimized for effective fungal pretreatment of
vitaminb12
Vitamin B12, also known as Cobalamin, is a water-soluble vitamin that plays a key role in the functioning of the nervous system and the formation of red blood cells. It is produced by microorganisms through fermentation and cannot be synthesized by animals or plants. The document discusses the industrial production process of vitamin B12 through bacterial fermentation using various microorganisms like Streptomyces and Propionibacterium. The production process involves growing the microorganisms in nutrient media under controlled conditions, followed by downstream processing steps like filtration, extraction, and crystallization to isolate vitamin B12.
The International Journal of Engineering and Science (The IJES)
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
pretreatment methods for manufacture of biogas from agricutural wastes
An insight into the various pretreatment methods applied to the raw wastes before the preparation of biogas
Biodegradable synthetic fibre from corn
The document discusses the development of a new biodegradable synthetic fiber made from polylactic acid (PLA), which is synthesized from renewable corn rather than fossil fuels. PLA fiber addresses issues of depleting resources and non-biodegradable synthetic fibers. PLA fiber has properties suitable for textiles, packaging, and other applications. It can be processed like conventional synthetics but is renewable and fully biodegradable, offering environmental benefits over existing fibers. The production process involves fermenting corn into lactic acid and polymerizing it into PLA fiber through established textile processes.
Berberine and Berberine derivatives
This document discusses 17 different structure modifications made to berberine and their resulting medicinal attributes. Some key modifications include adding dehydro groups to create antiprotozoal derivatives, adding benzyl groups to make antibacterial and antifungal derivatives, and adding lipophilic groups to yield hypoglycemic agents. The modifications allow berberine derivatives to exhibit various therapeutic effects such as inhibiting acetylcholinesterase, acting as anti-cancer agents, and treating conditions like leishmaniasis, malaria, and trypanosomiasis.
Bacterial Cellulose presentation
Bacterial cellulose is produced by certain bacteria through a four step process: strain selection, culture medium preparation, cultivation, and downstream processing. The conventional culture medium contains glucose, peptone and yeast extract. Recent studies have shown that adding ethanol and acetic acid to this medium can improve bacterial cellulose yield up to 279%. Bacterial cellulose has many applications including use in facial masks, food packaging, biomedical devices, and artificial meat.
2013 SRJC Preliminary Examination, H2 Chemistry Syllabus 9647, Paper 3 Questi...
The document summarizes the Wittig reaction used to synthesize β-carotene. The aldehyde used is retinal and the symmetrical diylide containing two equivalents of phosphorus that produces 6 stereoisomers is (E,E,E)-1,3,5-trimethyl-1,3,5-hexatriene ylide.
Cellulose based biocomposites
This document discusses cellulose-based biocomposites. It defines biocomposites as materials composed of two or more distinct materials, one being naturally derived. Cellulose biocomposites are made from a cellulose polymer matrix reinforced with natural fibers. The document discusses the structure and properties of cellulose, as well as methods for preparing cellulose biocomposites, such as injection molding and compression molding. Potential applications of cellulose biocomposites are also mentioned, including use in packaging, biomedical products, and electronics.
Expression of Biodegradable plastics in Plants
This document discusses expressing biodegradable plastics like polyhydroxybutyrate (PHB) in plants. PHB is normally produced by bacteria like Ralstonia eutropha from glucose. The document proposes transferring the PHB biosynthesis genes from R. eutropha into plant chloroplast genomes to produce PHB in plant plastids. Experiments generated transgenic Arabidopsis and tobacco plants accumulating up to 5% of their dry weight as PHB localized to plastids. Targeting PHB production to maize and rapeseed plastids was also achieved. This approach addresses producing biodegradable plastics from renewable plant resources.
PHB production by bacteria and its applications
Polyhydroxybutyrates (PHBs) are biodegradable polymers produced by some bacteria when excess carbon is available. Bacteria accumulate PHBs intracellularly as carbon and energy reserves. PHB is the most common type and was first discovered in 1925. It has properties suitable for applications like bioplastics, medical implants, and packaging. Research is optimizing production methods like varying carbon sources, nutrients, and growing conditions to improve PHB yields from bacteria. Genetic engineering and mutation studies also aim to develop higher yielding bacterial strains for more economical commercial production of PHB bioplastics.
Pretreatment of biomass
This document discusses various pre-treatment methods that can be used to break down lignocellulosic biomass to enhance biogas production from anaerobic digestion. It describes mechanical, thermal, chemical, and biological pre-treatment techniques and provides examples of each. The goal of pre-treatment is to increase the surface area and porosity of the biomass to improve degradation and yield more biogas in a shorter period of time from a wider variety of feedstocks.
Oh functionalization by glycerol
This document describes a two-step process to produce polyols from soybean oil for use in polyurethane applications. The first step involves thermally polymerizing soybean oil through a Diels-Alder reaction to produce bodied soybean oil (BSBO). The second step involves transesterifying the BSBO with glycerol at temperatures over 200°C to introduce hydroxyl functionality and produce glycerol-transesterified bodied soybean oil (GLYC-BSBO) polyols. The properties of the polyols such as hydroxyl number, acidity, and viscosity were characterized. The polyols were then evaluated in elastomers and rigid foams to assess their potential as
Delignification
This document discusses delignification, which is a pretreatment process for lignocellulosic biomass like rice straw to improve enzymatic hydrolysis for biofuel production. It explains that alkaline pretreatment using chemicals like sodium hydroxide is commonly used to degrade lignin and make cellulose more accessible. While calcium hydroxide is inexpensive, sodium hydroxide requires less water and lower temperatures. The document also notes that rice straw is a promising feedstock due to its abundance and reviews how pretreatment alters the lignocellulose structure to improve downstream processing into biofuels.
Biopolymer
This document discusses biopolymers, which are polymers derived from living organisms. It defines biopolymers and provides examples such as cellulose, starch, and proteins. The document then covers the classification of biopolymers such as starch-based, sugar-based, and cellulose-based polymers. It also discusses the production and applications of biopolymers in packaging, agriculture, automotive and medical sectors. Finally, it outlines the environmental benefits and impacts of biopolymers.
Ionic Liquids in Plastic/Coating Applications - 10 minutes intro to Holland ...
Ionic Liquids in Plastic/Coating Applications - 10 minutes intro to Holland ...Amabilis Jelliarko Palgunadi
Ionic liquids are molten salts composed of large organic cations and anions that remain liquid at low temperatures. They have a structure that can be tailored for specific applications, such as incorporating pigments, dyes, or additives into plastics or coatings. BASF has developed the first commercial process using ionic liquids under the name BASIL and offers a portfolio of ionic liquids called BASIONIC. Ionic liquids show potential as novel plasticizers to modify the mechanical properties of renewable biomaterials like starch and cellulose, as well as dispersants for nanoparticles in coatings and plastics.IMPORTANCE OF BIO-POLYMERS AND POLYMERS
This document discusses polymers and biopolymers. It defines polymers as large molecules composed of repeated subunits and explains that polymerization combines monomers into covalently bonded chains. It outlines various applications of polymers in automotive, medical, and aerospace fields. Both positives like strength and weight and negatives like improper disposal are noted. Solutions proposed include reuse, recycling like Levi's jeans containing recycled PET bottles, plastic roads in India containing waste plastic, and converting plastics to fuels. Biopolymers derived from renewable resources are highlighted as alternatives that are biodegradable, carbon neutral, and help reduce fossil fuel dependence.
Biopolymer
The document discusses biopolymers, which are polymers produced by living organisms. It covers various types of biodegradable polymers including synthetic polymers like polylactic acid (PLA) and natural polymers like starch. The mechanisms of polymer biodegradation are described. Applications of biodegradable polymers in areas like biomedical, packaging and agriculture are also mentioned. Factors affecting the biodegradation of polymers are discussed. Current trends in biopolymers including their use as alternatives to petroleum-based plastics are summarized.
Biopolymers
Introduction
Types
Characteristics of Biopolymer
Applications
Conclusion
References
Biopolymers are polymers produced from natural sources either
chemically synthesized from a biological material or entirely
biosynthesized by living organisms.
A study on Hydrocarbon Degradation by Biosurfactant Producing Bacillus cereus...
A study on Hydrocarbon Degradation by Biosurfactant Producing Bacillus cereus...SSR Institute of International Journal of Life Sciences
DOI: 10.21276/ijlssr.2016.2.4.4
ABSTRACT- Microorganisms are the important factors in the degradation of the toxic substances in our environment.
Petrol and diesel oil is one of the complex mixtures which cannot be easily degraded. The Bacillus cereus was involved in
the degradation of oil during which the complex toxic substances were detoxified by the production of biosurfactants. In
our study we have identified that the biosurfactant producing Bacillus cereus have a high potential for hydrocarbon
degradation. The Bacillus cereus was isolated from hydrocarbon contaminated soil and identified based on morphology
and biochemical test according to the Bergey’s manual of systematic bacteriology. The maximum hydrocarbon degrading
biosurfactant producing Bacillus cereus was obtained by qualitative and quantitative methods. In optimization studies, the
best results observed for Bacillus cereus were, Olive oil as the suitable carbon source, Sodium nitrate as the best Nitrogen
source and Optimum pH is 7 and Optimum temperature is 37°C. The ability of these isolates to degrade hydrocarbons and
survive in the oil contaminated soil is attributed to the development of resistance by mutation on the plasmid. It is also
clearly evident that the specific gene was responsible for the production of biosurfactant and the degradation process.
According to the results from the present study the Bacillus cereus has high potential for hydrocarbon degradation and can
be used especially for Microbial Enhanced Oil Recovery and bioremediation of hydrocarbons in near future.
Key-words- Bacillus cereus, Biosurfactant, Hydrocarbon, Biodegradation, Plasmid DNABiopolymers Information
Biopolymer, Biogums, Bio-polysaccharide, Bio-surfactant, Bio-lubricant, Bio-detergent, Bio-flocculant, Bio-adhesive, Chitin, Chitosan, Microbial, Cellulose, Production, Pectin, Lignin, Polyamide, Microbiological, Biotechnology, World, Market, Demand, Xanthan, Dextran, Scleroglucan, Company, Commercial, Applications, Advantages, Chemical structure, Properties, Purification, Economics, Company, Manufacturer, Jogdand.
For soft copy of this document please feel free to contact us on info@biotechsupportbase.com or snjogdand@gmail.com
Ppt of biodegradable packaging
Biopolymers can be divided into three categories based on their origin and production:
1) Polymers directly extracted from biomass like starch and cellulose
2) Polymers produced from biobased monomers through chemical synthesis like polylactic acid
3) Polymers produced by microorganisms or genetically modified bacteria like polyhydroxyalkanoates
Common biopolymers include starch, polylactic acid, polyhydroxyalkanoates, and polycaprolactone. These materials have properties similar to conventional plastics but are biodegradable. Their gas barrier and thermal properties depend on material and humidity conditions. Biopolymers can be composted within weeks to months depending on
INJECTION MOLDING PROCESS FOR BIOPOLYMERS
Injection molding is the one of the important processing method of plastics. Here we are introduce the processing of biopolymers
RHAMNOLIPIDS biosurfactants
This document discusses biosurfactants, specifically rhamnolipids. It defines biosurfactants and notes that they are produced by microbes. Rhamnolipids are glycolipids produced by Pseudomonas aeruginosa bacteria. They are useful for their ability to lower surface tension and have applications in enhanced oil recovery, bioremediation, and more. The document outlines methods for rhamnolipid production and detection and reviews current and potential future applications. It concludes that biosurfactants are promising but still more expensive than chemicals and would benefit from further optimization and development.
Biopolymers
There are many uses for polymers in biomaterials due to their wide variety of properties. Common polymer biomaterials include polyethylene, which is used in bottles and containers, and polytetrafluoroethylene, used for artificial joints and vascular grafts. Polymers can exist as solids, liquids, or gases depending on their molecular weight and state, and in biomaterials they are often used as solid, amorphous or semi-crystalline polymers with different properties based on their crystalline structure.
Lbm degradation
1. Lignocellulose is the most abundant organic material on Earth and is composed of cellulose, hemicellulose, pectin, and lignin.
2. Microorganisms can degrade lignocellulose by producing cell wall degrading enzymes that break down the polysaccharide components into simpler sugars.
3. The degradation of cellulose, hemicellulose, pectin, and lignin involves different enzyme classes and pathways. Future research aims to identify microbes and improve strains that can efficiently convert lignocellulosic biomass into ethanol.
Biopolymer lecture 1
This document discusses biopolymers and biomaterials, including definitions of biopolymers as renewable and sustainable polymers derived from biological sources like carbohydrates, proteins, lipids, and nucleic acids. Key properties and applications of common biopolymers like carbohydrates, proteins, and lipids are described. The document also provides an overview of biomaterials, their types and properties, as well as guidelines for evaluating biocompatibility.
Furan
The document discusses the use of fiber-reinforced plastic composites made from sustainable materials for automotive applications. Specifically, it examines glass fiber reinforced with furan resin (BioCompA) and flax fiber reinforced with furan resin (BioCompB), comparing them to a standard glass fiber/polyester composite. Testing included fluid exposure, tensile strength, fastener pull-through, and impact resistance. Results showed BioCompA performed similarly to glass fiber/polyester composite, while further development is needed for BioCompB to improve mechanical properties and reduce resin bleeding.
Histidine
Histidine is an essential amino acid that plays several important roles in the body. It is important for tissue growth and repair, producing red and white blood cells, and maintaining myelin sheaths around nerves. Histidine also helps remove heavy metals, aids in digestion, and supports the immune system. Low histidine levels are associated with chronic kidney disease and increased mortality. Deficiencies can also impact neurotransmitter activity in the brain and increase anxiety levels.
More Related Content
What's hot
2013 SRJC Preliminary Examination, H2 Chemistry Syllabus 9647, Paper 3 Questi...
The document summarizes the Wittig reaction used to synthesize β-carotene. The aldehyde used is retinal and the symmetrical diylide containing two equivalents of phosphorus that produces 6 stereoisomers is (E,E,E)-1,3,5-trimethyl-1,3,5-hexatriene ylide.
Cellulose based biocomposites
This document discusses cellulose-based biocomposites. It defines biocomposites as materials composed of two or more distinct materials, one being naturally derived. Cellulose biocomposites are made from a cellulose polymer matrix reinforced with natural fibers. The document discusses the structure and properties of cellulose, as well as methods for preparing cellulose biocomposites, such as injection molding and compression molding. Potential applications of cellulose biocomposites are also mentioned, including use in packaging, biomedical products, and electronics.
Expression of Biodegradable plastics in Plants
This document discusses expressing biodegradable plastics like polyhydroxybutyrate (PHB) in plants. PHB is normally produced by bacteria like Ralstonia eutropha from glucose. The document proposes transferring the PHB biosynthesis genes from R. eutropha into plant chloroplast genomes to produce PHB in plant plastids. Experiments generated transgenic Arabidopsis and tobacco plants accumulating up to 5% of their dry weight as PHB localized to plastids. Targeting PHB production to maize and rapeseed plastids was also achieved. This approach addresses producing biodegradable plastics from renewable plant resources.
PHB production by bacteria and its applications
Polyhydroxybutyrates (PHBs) are biodegradable polymers produced by some bacteria when excess carbon is available. Bacteria accumulate PHBs intracellularly as carbon and energy reserves. PHB is the most common type and was first discovered in 1925. It has properties suitable for applications like bioplastics, medical implants, and packaging. Research is optimizing production methods like varying carbon sources, nutrients, and growing conditions to improve PHB yields from bacteria. Genetic engineering and mutation studies also aim to develop higher yielding bacterial strains for more economical commercial production of PHB bioplastics.
Pretreatment of biomass
This document discusses various pre-treatment methods that can be used to break down lignocellulosic biomass to enhance biogas production from anaerobic digestion. It describes mechanical, thermal, chemical, and biological pre-treatment techniques and provides examples of each. The goal of pre-treatment is to increase the surface area and porosity of the biomass to improve degradation and yield more biogas in a shorter period of time from a wider variety of feedstocks.
Oh functionalization by glycerol
This document describes a two-step process to produce polyols from soybean oil for use in polyurethane applications. The first step involves thermally polymerizing soybean oil through a Diels-Alder reaction to produce bodied soybean oil (BSBO). The second step involves transesterifying the BSBO with glycerol at temperatures over 200°C to introduce hydroxyl functionality and produce glycerol-transesterified bodied soybean oil (GLYC-BSBO) polyols. The properties of the polyols such as hydroxyl number, acidity, and viscosity were characterized. The polyols were then evaluated in elastomers and rigid foams to assess their potential as
Delignification
This document discusses delignification, which is a pretreatment process for lignocellulosic biomass like rice straw to improve enzymatic hydrolysis for biofuel production. It explains that alkaline pretreatment using chemicals like sodium hydroxide is commonly used to degrade lignin and make cellulose more accessible. While calcium hydroxide is inexpensive, sodium hydroxide requires less water and lower temperatures. The document also notes that rice straw is a promising feedstock due to its abundance and reviews how pretreatment alters the lignocellulose structure to improve downstream processing into biofuels.
Biopolymer
This document discusses biopolymers, which are polymers derived from living organisms. It defines biopolymers and provides examples such as cellulose, starch, and proteins. The document then covers the classification of biopolymers such as starch-based, sugar-based, and cellulose-based polymers. It also discusses the production and applications of biopolymers in packaging, agriculture, automotive and medical sectors. Finally, it outlines the environmental benefits and impacts of biopolymers.
Ionic Liquids in Plastic/Coating Applications - 10 minutes intro to Holland ...
Ionic Liquids in Plastic/Coating Applications - 10 minutes intro to Holland ...Amabilis Jelliarko Palgunadi
Ionic liquids are molten salts composed of large organic cations and anions that remain liquid at low temperatures. They have a structure that can be tailored for specific applications, such as incorporating pigments, dyes, or additives into plastics or coatings. BASF has developed the first commercial process using ionic liquids under the name BASIL and offers a portfolio of ionic liquids called BASIONIC. Ionic liquids show potential as novel plasticizers to modify the mechanical properties of renewable biomaterials like starch and cellulose, as well as dispersants for nanoparticles in coatings and plastics.IMPORTANCE OF BIO-POLYMERS AND POLYMERS
This document discusses polymers and biopolymers. It defines polymers as large molecules composed of repeated subunits and explains that polymerization combines monomers into covalently bonded chains. It outlines various applications of polymers in automotive, medical, and aerospace fields. Both positives like strength and weight and negatives like improper disposal are noted. Solutions proposed include reuse, recycling like Levi's jeans containing recycled PET bottles, plastic roads in India containing waste plastic, and converting plastics to fuels. Biopolymers derived from renewable resources are highlighted as alternatives that are biodegradable, carbon neutral, and help reduce fossil fuel dependence.
Biopolymer
The document discusses biopolymers, which are polymers produced by living organisms. It covers various types of biodegradable polymers including synthetic polymers like polylactic acid (PLA) and natural polymers like starch. The mechanisms of polymer biodegradation are described. Applications of biodegradable polymers in areas like biomedical, packaging and agriculture are also mentioned. Factors affecting the biodegradation of polymers are discussed. Current trends in biopolymers including their use as alternatives to petroleum-based plastics are summarized.
Biopolymers
Introduction
Types
Characteristics of Biopolymer
Applications
Conclusion
References
Biopolymers are polymers produced from natural sources either
chemically synthesized from a biological material or entirely
biosynthesized by living organisms.
A study on Hydrocarbon Degradation by Biosurfactant Producing Bacillus cereus...
A study on Hydrocarbon Degradation by Biosurfactant Producing Bacillus cereus...SSR Institute of International Journal of Life Sciences
DOI: 10.21276/ijlssr.2016.2.4.4
ABSTRACT- Microorganisms are the important factors in the degradation of the toxic substances in our environment.
Petrol and diesel oil is one of the complex mixtures which cannot be easily degraded. The Bacillus cereus was involved in
the degradation of oil during which the complex toxic substances were detoxified by the production of biosurfactants. In
our study we have identified that the biosurfactant producing Bacillus cereus have a high potential for hydrocarbon
degradation. The Bacillus cereus was isolated from hydrocarbon contaminated soil and identified based on morphology
and biochemical test according to the Bergey’s manual of systematic bacteriology. The maximum hydrocarbon degrading
biosurfactant producing Bacillus cereus was obtained by qualitative and quantitative methods. In optimization studies, the
best results observed for Bacillus cereus were, Olive oil as the suitable carbon source, Sodium nitrate as the best Nitrogen
source and Optimum pH is 7 and Optimum temperature is 37°C. The ability of these isolates to degrade hydrocarbons and
survive in the oil contaminated soil is attributed to the development of resistance by mutation on the plasmid. It is also
clearly evident that the specific gene was responsible for the production of biosurfactant and the degradation process.
According to the results from the present study the Bacillus cereus has high potential for hydrocarbon degradation and can
be used especially for Microbial Enhanced Oil Recovery and bioremediation of hydrocarbons in near future.
Key-words- Bacillus cereus, Biosurfactant, Hydrocarbon, Biodegradation, Plasmid DNABiopolymers Information
Biopolymer, Biogums, Bio-polysaccharide, Bio-surfactant, Bio-lubricant, Bio-detergent, Bio-flocculant, Bio-adhesive, Chitin, Chitosan, Microbial, Cellulose, Production, Pectin, Lignin, Polyamide, Microbiological, Biotechnology, World, Market, Demand, Xanthan, Dextran, Scleroglucan, Company, Commercial, Applications, Advantages, Chemical structure, Properties, Purification, Economics, Company, Manufacturer, Jogdand.
For soft copy of this document please feel free to contact us on info@biotechsupportbase.com or snjogdand@gmail.com
Ppt of biodegradable packaging
Biopolymers can be divided into three categories based on their origin and production:
1) Polymers directly extracted from biomass like starch and cellulose
2) Polymers produced from biobased monomers through chemical synthesis like polylactic acid
3) Polymers produced by microorganisms or genetically modified bacteria like polyhydroxyalkanoates
Common biopolymers include starch, polylactic acid, polyhydroxyalkanoates, and polycaprolactone. These materials have properties similar to conventional plastics but are biodegradable. Their gas barrier and thermal properties depend on material and humidity conditions. Biopolymers can be composted within weeks to months depending on
INJECTION MOLDING PROCESS FOR BIOPOLYMERS
Injection molding is the one of the important processing method of plastics. Here we are introduce the processing of biopolymers
RHAMNOLIPIDS biosurfactants
This document discusses biosurfactants, specifically rhamnolipids. It defines biosurfactants and notes that they are produced by microbes. Rhamnolipids are glycolipids produced by Pseudomonas aeruginosa bacteria. They are useful for their ability to lower surface tension and have applications in enhanced oil recovery, bioremediation, and more. The document outlines methods for rhamnolipid production and detection and reviews current and potential future applications. It concludes that biosurfactants are promising but still more expensive than chemicals and would benefit from further optimization and development.
Biopolymers
There are many uses for polymers in biomaterials due to their wide variety of properties. Common polymer biomaterials include polyethylene, which is used in bottles and containers, and polytetrafluoroethylene, used for artificial joints and vascular grafts. Polymers can exist as solids, liquids, or gases depending on their molecular weight and state, and in biomaterials they are often used as solid, amorphous or semi-crystalline polymers with different properties based on their crystalline structure.
Lbm degradation
1. Lignocellulose is the most abundant organic material on Earth and is composed of cellulose, hemicellulose, pectin, and lignin.
2. Microorganisms can degrade lignocellulose by producing cell wall degrading enzymes that break down the polysaccharide components into simpler sugars.
3. The degradation of cellulose, hemicellulose, pectin, and lignin involves different enzyme classes and pathways. Future research aims to identify microbes and improve strains that can efficiently convert lignocellulosic biomass into ethanol.
Biopolymer lecture 1
This document discusses biopolymers and biomaterials, including definitions of biopolymers as renewable and sustainable polymers derived from biological sources like carbohydrates, proteins, lipids, and nucleic acids. Key properties and applications of common biopolymers like carbohydrates, proteins, and lipids are described. The document also provides an overview of biomaterials, their types and properties, as well as guidelines for evaluating biocompatibility.
What's hot (20)
2013 SRJC Preliminary Examination, H2 Chemistry Syllabus 9647, Paper 3 Questi...
2013 SRJC Preliminary Examination, H2 Chemistry Syllabus 9647, Paper 3 Questi...
Ionic Liquids in Plastic/Coating Applications - 10 minutes intro to Holland ...
Ionic Liquids in Plastic/Coating Applications - 10 minutes intro to Holland ...
A study on Hydrocarbon Degradation by Biosurfactant Producing Bacillus cereus...
A study on Hydrocarbon Degradation by Biosurfactant Producing Bacillus cereus...
More from Nabeel B Azeez
Furan
The document discusses the use of fiber-reinforced plastic composites made from sustainable materials for automotive applications. Specifically, it examines glass fiber reinforced with furan resin (BioCompA) and flax fiber reinforced with furan resin (BioCompB), comparing them to a standard glass fiber/polyester composite. Testing included fluid exposure, tensile strength, fastener pull-through, and impact resistance. Results showed BioCompA performed similarly to glass fiber/polyester composite, while further development is needed for BioCompB to improve mechanical properties and reduce resin bleeding.
Histidine
Histidine is an essential amino acid that plays several important roles in the body. It is important for tissue growth and repair, producing red and white blood cells, and maintaining myelin sheaths around nerves. Histidine also helps remove heavy metals, aids in digestion, and supports the immune system. Low histidine levels are associated with chronic kidney disease and increased mortality. Deficiencies can also impact neurotransmitter activity in the brain and increase anxiety levels.
Biological liquid crystals
This document provides an introduction to liquid crystals including:
- Their discovery in 1888 by Friedrich Reinitzer who observed two melting points in cholesteryl benzoate.
- Their unique properties between solid and liquid phases termed the "mesogenic state".
- Two main structural forms: thermotropic which depends on temperature and lyotropic which depends on concentration.
- Examples of liquid crystals in biology like cell membranes, myelin, and spider silk which use liquid crystalline properties.
- Potential medical applications of lyotropic liquid crystals like liposomes for targeted drug delivery.
Green analytical chemistry
general description about green analytical chemistry and usesome articles which relating to this presentation
Nanobiosensors
a general informations a bout nanobiosensors with 3 published papers which is related to nanobiosensors
Diels alder reaction
This document discusses the Diels-Alder reaction, which involves a conjugated diene reacting with a dienophile to form a substituted cyclohexene system. It notes that the Diels-Alder reaction is useful for forming 6-membered rings with control over regio- and stereochemistry. The reaction can be reversible under certain conditions. Stereochemical information is retained in the products, with E- and Z-dienophiles giving syn or anti stereochemistry in the adducts. Retrosynthetic analysis can utilize the Diels-Alder reaction.
Neodymium magnet
Neodymium magnets, also known as NdFeB magnets, are the most widely used rare earth magnet. They are an alloy of neodymium, iron, and boron that form a tetragonal crystal structure. Neodymium magnets have higher magnetic strength and coercivity compared to other magnet types. There are two main production methods: powder metallurgy and rapid solidification. Due to grain boundary corrosion, neodymium magnets require protective coatings like nickel plating to prevent deterioration. Neodymium magnets have replaced other magnet types in many applications because their strength allows for smaller, lighter magnets.
Ebola
The document discusses Ebola virus disease (EVD), including that it is a deadly virus transmitted through contact with infected body fluids that causes hemorrhagic fever. It outlines the virus's history, symptoms, transmission, treatments being tested including vaccines, and current outbreak statistics showing exponential growth in West Africa.
More from Nabeel B Azeez (8)
Recently uploaded
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcDigital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
A Strategic Approach: GenAI in Education
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Types of Herbal Cosmetics its standardization.
Physiology and chemistry of skin and pigmentation, hairs, scalp, lips and nail, Cleansing cream, Lotions, Face powders, Face packs, Lipsticks, Bath products, soaps and baby product,
Preparation and standardization of the following : Tonic, Bleaches, Dentifrices and Mouth washes & Tooth Pastes, Cosmetics for Nails.
Recently uploaded (20)
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Cannabisativine
- 1. DR . FIKRET KOC DEPARTMENT OF CHEMISTRY STUDENT NAME : NABEEL B AZEEZ
- 4. dihydropyridone Weinreb’s amide diol
- 5. carbamate dihydropyridone Bicyclic carbamate
- 9. tetrahydropyridine thiocarbamate thiocarbamate Cis-beta-hydroselenides
- 11. Micheal addition product Amino alcohol amides ether Desired aminodiol N_benzylaminoalcohol
- 12. Amino dimethyl acetal Dimethyl acetal aminodiol
- 13. aminodiol lactam