Bk.tng 001-gen-az-sp-02 painting specification
•
1 like•1,552 views
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Report
Share
Report
Share
Download to read offline
Recommended
Rigid pavement design
This document summarizes key concepts in rigid pavement design as outlined by Westergaard. It describes:
1) Westergaard's definition of modulus of subgrade reaction and radius of relative stiffness, which characterize the interaction between the rigid pavement slab and underlying soil.
2) Westergaard's stress equations which calculate critical stresses at interior, edge, and corner regions due to wheel loads and temperature variations.
3) Considerations for joint design including expansion joints, contraction joints, dowel bars, and tie bars to allow for movement while transferring loads between panels.
Strength and durability of concrete - Repair and rehabilitation of structures...
Quality assurance for concrete – Strength, Durability and Thermal properties, of concrete - Cracks, different types, causes – Effects due to climate, temperature, Sustained elevated temperature, Corrosion - Effects of cover thickness.
03 pavement materials - soil
This document discusses different types of pavement materials, focusing on soil. It defines soil and its functions in pavement construction. Key soil properties for pavement known as index properties are described, including liquid limit, plastic limit and plasticity index. Several common soil classification systems are outlined, including the Unified Soil Classification System and AASHTO System. The document also covers soil investigation methods, both in the field and laboratory testing, to characterize soil properties like density, permeability and resilient modulus important for pavement design.
Vertical Drain
This document discusses vertical drains, which are used to accelerate consolidation in saturated clays. It describes how vertical drains work by shortening drainage paths within clay. Common installation methods involve creating boreholes and placing vertical drains made of sand or prefabricated materials like sandwick or band drains. Design considerations for vertical drains include drain spacing, fill height, soil permeability, and achieving a desired consolidation level within a given time. Mathematical equations are provided for analyzing consolidation based on Terzaghi's theory involving factors like coefficient of consolidation and excess pore water pressure. An example problem demonstrates calculating degree of consolidation over time for a layered soil system using vertical drains.
Design and construction of highway (flexible pavement
This document discusses the design and construction of roads. It describes the different materials used in road construction like aggregate and asphalt. It explains the functions of different pavement layers and the importance of thickness design based on traffic volume and soil properties. The construction process involves preparing each layer from the subgrade to the wearing surface. Tests are conducted on aggregate and bitumen to ensure quality of materials used in road construction.
Pavement materials in Road Construction
Different pavement materials used in the road construction. Importance of soil, aggregate pavement materials. Tests on Soil for pavement construction. Tests on aggregate for pavement construction.
Requirements of soil and aggregates in pavement.
Bitumen
The document discusses bitumen, including its definition, manufacturing process, properties, forms, difference from tar, and tests. It defines bitumen as a viscous material derived from petroleum through fractional distillation. Bitumen has varying viscosity and softening points depending on its temperature and composition. It exists in solid, semi-solid, and liquid forms and is used for road construction and building applications. Key tests described are penetration, softening point, and viscosity tests which evaluate bitumen consistency and temperature susceptibility.
Erection of structural components in precast constructions
The document discusses the process of erecting structural components in prefabricated structures. It emphasizes the importance of proper planning, preparation, and following assembly plans to ensure effective and quality installation. Key steps in the erection process include setting out locations, lifting and installing vertical/horizontal members, grouting joints, and casting joints. Safety precautions must also be followed during erection. The document provides details on good practices at each stage and references codes of practice for prefabricated concrete erection.
Recommended
Rigid pavement design
This document summarizes key concepts in rigid pavement design as outlined by Westergaard. It describes:
1) Westergaard's definition of modulus of subgrade reaction and radius of relative stiffness, which characterize the interaction between the rigid pavement slab and underlying soil.
2) Westergaard's stress equations which calculate critical stresses at interior, edge, and corner regions due to wheel loads and temperature variations.
3) Considerations for joint design including expansion joints, contraction joints, dowel bars, and tie bars to allow for movement while transferring loads between panels.
Strength and durability of concrete - Repair and rehabilitation of structures...
Quality assurance for concrete – Strength, Durability and Thermal properties, of concrete - Cracks, different types, causes – Effects due to climate, temperature, Sustained elevated temperature, Corrosion - Effects of cover thickness.
03 pavement materials - soil
This document discusses different types of pavement materials, focusing on soil. It defines soil and its functions in pavement construction. Key soil properties for pavement known as index properties are described, including liquid limit, plastic limit and plasticity index. Several common soil classification systems are outlined, including the Unified Soil Classification System and AASHTO System. The document also covers soil investigation methods, both in the field and laboratory testing, to characterize soil properties like density, permeability and resilient modulus important for pavement design.
Vertical Drain
This document discusses vertical drains, which are used to accelerate consolidation in saturated clays. It describes how vertical drains work by shortening drainage paths within clay. Common installation methods involve creating boreholes and placing vertical drains made of sand or prefabricated materials like sandwick or band drains. Design considerations for vertical drains include drain spacing, fill height, soil permeability, and achieving a desired consolidation level within a given time. Mathematical equations are provided for analyzing consolidation based on Terzaghi's theory involving factors like coefficient of consolidation and excess pore water pressure. An example problem demonstrates calculating degree of consolidation over time for a layered soil system using vertical drains.
Design and construction of highway (flexible pavement
This document discusses the design and construction of roads. It describes the different materials used in road construction like aggregate and asphalt. It explains the functions of different pavement layers and the importance of thickness design based on traffic volume and soil properties. The construction process involves preparing each layer from the subgrade to the wearing surface. Tests are conducted on aggregate and bitumen to ensure quality of materials used in road construction.
Pavement materials in Road Construction
Different pavement materials used in the road construction. Importance of soil, aggregate pavement materials. Tests on Soil for pavement construction. Tests on aggregate for pavement construction.
Requirements of soil and aggregates in pavement.
Bitumen
The document discusses bitumen, including its definition, manufacturing process, properties, forms, difference from tar, and tests. It defines bitumen as a viscous material derived from petroleum through fractional distillation. Bitumen has varying viscosity and softening points depending on its temperature and composition. It exists in solid, semi-solid, and liquid forms and is used for road construction and building applications. Key tests described are penetration, softening point, and viscosity tests which evaluate bitumen consistency and temperature susceptibility.
Erection of structural components in precast constructions
The document discusses the process of erecting structural components in prefabricated structures. It emphasizes the importance of proper planning, preparation, and following assembly plans to ensure effective and quality installation. Key steps in the erection process include setting out locations, lifting and installing vertical/horizontal members, grouting joints, and casting joints. Safety precautions must also be followed during erection. The document provides details on good practices at each stage and references codes of practice for prefabricated concrete erection.
Vibration method for ground improvement technique
This document discusses various ground improvement techniques, including vertical drains, soil nailing, stone columns, vibro compaction, and dynamic compaction. Vertical drains accelerate consolidation by facilitating drainage of pore water through columns of pervious material placed in soil. Soil nailing uses steel tendons drilled and grouted into soil to create a reinforced composite mass. Stone columns form vertical columns of compacted aggregate through problem soils to increase strength and reduce compressibility. Vibro compaction densifies loose sands using vibratory probes to achieve a denser soil structure. Dynamic compaction improves soil by repeatedly dropping heavy weights onto the ground from heights of 40 to 80 feet.
9. Highway Maintenance.pdf
The document discusses highway maintenance, repair, and rehabilitation. It defines the terms and explains that maintenance aims to preserve elements in a serviceable condition through tasks like planning, programming, scheduling, and performing activities. These activities include identifying defects, determining causes, implementing remedial measures, and monitoring results. Maintenance is classified into routine, recurrent, preventive/specific, periodic, and emergency types based on nature and frequency. Factors like weather, traffic, design, and construction quality affect maintenance costs. Inspections are needed to prioritize needs and plan efficient allocation of limited maintenance funds.
Maintenance of concrete structures
This document discusses maintenance of concrete structures. It defines maintenance as work done to keep structures in working condition for their intended use. The objectives of maintenance are to prevent damage from natural causes and wear, and to keep structures in good condition. Maintenance is classified as preventive, remedial, routine, and special. Inspection of structures is important to identify deterioration causes like weathering, wear, and failures. Proper maintenance improves structure life and serviceability.
Acid attack on concrete
This presentation gives an overview on different types of acid attacks on concrete. Mechanism of each attack is discussed with few case studies. Hope it is useful
Bituminous pavement
The document discusses different types of bituminous pavement used in highway engineering. It describes how bituminous pavement is made by mixing heated aggregates like crushed stone with heated asphalt binders. It then lists various types of bituminous pavement like asphalt concrete and discusses their properties and appropriate uses based on traffic levels. The document also discusses factors that can lead to failures of bituminous concrete pavement like excessive loads beyond the pavement's strength.
POLYMER MODIFIED BITUMEN
This document presents information on polymer modified bitumen roads, also known as plastic roads. It discusses the need to find uses for waste plastic which is difficult to dispose of. Laboratory studies showed that adding shredded waste plastic to bituminous road mixes can improve the properties of the mix by increasing strength and resistance to water. The document outlines the construction process for plastic roads which involves heating aggregates and bitumen, adding shredded plastic, and laying and compacting the mix. Field trials of plastic roads demonstrated benefits like increased strength and reduced maintenance costs. Potential disadvantages include leaching of toxins from some plastics during the road's usage.
Distress of concrete structures & their repair techniques
This document discusses concrete distress and repair techniques. It begins by explaining that concrete structures may need repair after 25-30 years of service without maintenance. It then lists common causes of concrete distress like weathering, environmental effects, poor design/construction, and water leakage leading to corrosion. The document outlines expected service lives for different structure types. It also describes common concrete failure modes and causes of early deterioration. The remainder of the document discusses techniques for identifying distressed concrete, various repair materials and methods, and the need for trained concrete workers.
Highway materials and tests
Highway Materials: Desirable Properties, Testing Procedures, Standards, and standard values relating to Soil, Stone Aggregates, Bitumen and Tar, fly- ash/pond-ash. Role of filler in Bituminous mix, materials of filler.
Specifications of DLC and PQC for rigid pavement
7 compressibilty of soils
This document contains lecture notes on soil compressibility and consolidation from Khalid R. Mahmood, Assistant Professor of Civil Engineering at the University of Anbar in Iraq. The notes cover topics such as immediate settlement, primary consolidation settlement, secondary compression settlement, consolidation testing methods, and void ratio-effective stress relationships for normally consolidated and overconsolidated soils. Laboratory consolidation tests on soil samples are discussed as a method to determine compression indices, coefficient of permeability, and void ratio-effective stress behavior. Disturbance effects on consolidation testing results are also summarized.
Coating Failures & Defects
The document discusses various types of coating failures and defects such as blistering, chalking, cracking, cratering, fading, and more. For each one, it provides the causes such as osmotic gradients, soluble salts, corrosion products, thermal gradients, compressive stress, ultraviolet light, and more. It also lists ways to prevent the failures and defects, which include proper surface preparation, application of suitable coating systems, using light stable pigments, flexible coatings, correct application techniques and more.
Trickling filter ppt
The document discusses trickling filters, which are used in sewage treatment to remove suspended solids and dissolved organic loads from wastewater. Trickling filters use microbial populations attached to a filter media to break down organic matter. They consist of a rotating arm that sprays wastewater over a rock or plastic media, with wastewater collected below for further treatment. Trickling filters can be designed as low or high rate systems, with high rate filters having greater organic loading, hydraulic loading, and recirculation ratios compared to low rate filters. Operational issues include ponding, odors, and fly nuisance that can occur if the filters become anaerobic or clogged.
Residuals of industrial wastewater treatment
This document discusses residuals produced from industrial wastewater treatment and options for managing and disposing of them. Major residuals include sludge, concentrate/brines, spent resins, and air emissions. The appropriate disposal option depends on the waste characteristics and regulatory requirements. Disposal options for liquids include discharge to a publicly owned treatment works (POTW), underground injection, or direct discharge. For solids, options include landfill disposal depending on whether the waste is hazardous or contains radionuclides. The document provides detailed guidelines for selecting a disposal method based on waste and site-specific conditions.
Study of failures on flexible pavements & problems on road users
This document summarizes a study on failures of flexible pavements and issues for road users. It describes the purpose of pavements to carry traffic smoothly and distribute loads to the subgrade. Common types of failures include cracking (alligator, longitudinal, transverse), surface deformations (rutting, shoving), and disintegration (potholes, patches). Cracking allows moisture infiltration and causes roughness. Surface defects like bleeding reduce skid resistance. Non-destructive testing methods like liquid penetration and visual inspection are used to detect failures. Causes of failures include heavy traffic, low maintenance, use of low quality materials, and overloading of trucks. Proper control of vehicle loads and regular maintenance are needed to prevent damages and
Filtration ppt By Mayank Oza
This document discusses different types of water filtration processes. It describes slow sand gravity filters and rapid sand gravity filters. It explains the filtration materials used like sand, gravel and anthracite. Sand used as a filter material should be hard, uniformly sized, free from impurities and resistant. Gravel and anthracite are also used. Filters are classified as gravity filters like slow sand and rapid sand filters, and pressure filters like horizontal and vertical pressure filters. Slow sand filters have low filtration rates but are suitable for rural areas. Rapid sand filters have higher filtration rates and require less space. Pressure filters operate under pressure within a closed cylinder.
Sludge digestor
This document summarizes different types of sludge treatment processes. It discusses aerobic and anaerobic digestion. Aerobic digestion occurs in the presence of oxygen and is used for secondary sludge. Anaerobic digestion occurs without oxygen and reduces sludge volume by 1/3 by converting it to gases, acids and alcohols. The document also describes factors affecting digestion like temperature and pH, types of sludge digestors like standard rate and high rate digestors, gas production from sludge, and moisture content of raw and treated sludge.
Dense Bituminous macadam
Dense Bituminous Macadam (DBM) is a binder course used for roads with more number of heavy commercial vehicles and a close-graded premix material having a voids content of 5-10 per cent.
NON DESTRUCTIVE TESTING
Non-destructive testing methods can provide information about the properties of existing concrete structures without damaging them. Various methods are described in the document, including rebound hammer testing, ultrasonic pulse velocity testing, and radioactive methods. These methods measure physical properties like hardness, ultrasonic pulse transmission, and density that can help indicate characteristics like strength and uniformity or detect issues like cracking and honeycombing. Interpretation requires calibration and accounting for factors like materials and curing conditions. The goal of non-destructive testing is to evaluate concrete quality, strength, integrity, reinforcement, and signs of deterioration.
Pavement Materials Bitumen
This document provides information on bitumen, which is used as a binding material in pavements. It discusses the types of bitumen including paving grade, modified, cutback and emulsion. Cutback bitumen has solvents added to increase fluidity while bitumen emulsion uses water. Modified bitumen has additives added to improve properties. The document also describes various tests conducted on bitumen like penetration, ductility, softening point and viscosity to determine hardness and grading. Bitumen requirements include adequate viscosity and adhesion properties. The grading of bitumen depends on the results of penetration tests.
pavement materials:aggregates
This document discusses the types and properties of aggregates used in pavement construction. It describes aggregates as being fine (less than 4.75mm) or coarse (greater than 4.75mm) and coming from various natural sources like igneous, metamorphic, or sedimentary rock. It also discusses the importance of aggregate properties like strength, hardness, toughness, shape, adhesion to bitumen, and durability. Common tests to evaluate aggregates are described, such as crushing, abrasion, impact, absorption, and adhesion tests.
Construction and repair chemicals
The document discusses various construction and repair chemicals. It describes 21 categories of chemicals including injecting grouts, rust converters, corrosion inhibitors, passivating coats, bonding coats, plasticizers, super plasticizers, shrinkage reducing compounds, self-flowing micro concrete, polymer/epoxies in repair mortar, quick setting compounds, retarders, curing compounds, shutter oils, floor hardeners, waterproofing compounds, air entraining agents, anti-carbonation protective coatings, protective coats for steel, acid resistance enhancers, and anchoring compounds. Each category lists several product examples and describes their chemical composition and applications.
Painting procedure rev 0 (d 1157)
This document provides procedures for surface preparation and protective coating of carbon steel. It outlines responsibilities, safety requirements, surface preparation methods including abrasive blasting, coating application procedures, materials, and record keeping. The foreman and QC engineer are responsible for ensuring work complies with specifications. Proper abrasive blasting is required to achieve a 2-2.5 mil surface profile. A three-coat paint system consisting of a zinc-rich epoxy primer, epoxy mid-coat, and polyurethane finish coat is specified, with total dry film thickness of 10 mils. Inspection reports are required to document compliance.
Aramco inspection handbook
This document provides guidance for inspectors on paints and coatings. It outlines approved coating systems for various applications and services, including internal and external pipe coatings for buried, insulated, and atmospheric exposure conditions. It also provides standards on surface preparation, coating application, thickness measurement, and repair. Inspectors are instructed to follow the coating manufacturer's recommendations and use properly calibrated equipment to ensure coatings meet thickness and cure requirements.
More Related Content
What's hot
Vibration method for ground improvement technique
This document discusses various ground improvement techniques, including vertical drains, soil nailing, stone columns, vibro compaction, and dynamic compaction. Vertical drains accelerate consolidation by facilitating drainage of pore water through columns of pervious material placed in soil. Soil nailing uses steel tendons drilled and grouted into soil to create a reinforced composite mass. Stone columns form vertical columns of compacted aggregate through problem soils to increase strength and reduce compressibility. Vibro compaction densifies loose sands using vibratory probes to achieve a denser soil structure. Dynamic compaction improves soil by repeatedly dropping heavy weights onto the ground from heights of 40 to 80 feet.
9. Highway Maintenance.pdf
The document discusses highway maintenance, repair, and rehabilitation. It defines the terms and explains that maintenance aims to preserve elements in a serviceable condition through tasks like planning, programming, scheduling, and performing activities. These activities include identifying defects, determining causes, implementing remedial measures, and monitoring results. Maintenance is classified into routine, recurrent, preventive/specific, periodic, and emergency types based on nature and frequency. Factors like weather, traffic, design, and construction quality affect maintenance costs. Inspections are needed to prioritize needs and plan efficient allocation of limited maintenance funds.
Maintenance of concrete structures
This document discusses maintenance of concrete structures. It defines maintenance as work done to keep structures in working condition for their intended use. The objectives of maintenance are to prevent damage from natural causes and wear, and to keep structures in good condition. Maintenance is classified as preventive, remedial, routine, and special. Inspection of structures is important to identify deterioration causes like weathering, wear, and failures. Proper maintenance improves structure life and serviceability.
Acid attack on concrete
This presentation gives an overview on different types of acid attacks on concrete. Mechanism of each attack is discussed with few case studies. Hope it is useful
Bituminous pavement
The document discusses different types of bituminous pavement used in highway engineering. It describes how bituminous pavement is made by mixing heated aggregates like crushed stone with heated asphalt binders. It then lists various types of bituminous pavement like asphalt concrete and discusses their properties and appropriate uses based on traffic levels. The document also discusses factors that can lead to failures of bituminous concrete pavement like excessive loads beyond the pavement's strength.
POLYMER MODIFIED BITUMEN
This document presents information on polymer modified bitumen roads, also known as plastic roads. It discusses the need to find uses for waste plastic which is difficult to dispose of. Laboratory studies showed that adding shredded waste plastic to bituminous road mixes can improve the properties of the mix by increasing strength and resistance to water. The document outlines the construction process for plastic roads which involves heating aggregates and bitumen, adding shredded plastic, and laying and compacting the mix. Field trials of plastic roads demonstrated benefits like increased strength and reduced maintenance costs. Potential disadvantages include leaching of toxins from some plastics during the road's usage.
Distress of concrete structures & their repair techniques
This document discusses concrete distress and repair techniques. It begins by explaining that concrete structures may need repair after 25-30 years of service without maintenance. It then lists common causes of concrete distress like weathering, environmental effects, poor design/construction, and water leakage leading to corrosion. The document outlines expected service lives for different structure types. It also describes common concrete failure modes and causes of early deterioration. The remainder of the document discusses techniques for identifying distressed concrete, various repair materials and methods, and the need for trained concrete workers.
Highway materials and tests
Highway Materials: Desirable Properties, Testing Procedures, Standards, and standard values relating to Soil, Stone Aggregates, Bitumen and Tar, fly- ash/pond-ash. Role of filler in Bituminous mix, materials of filler.
Specifications of DLC and PQC for rigid pavement
7 compressibilty of soils
This document contains lecture notes on soil compressibility and consolidation from Khalid R. Mahmood, Assistant Professor of Civil Engineering at the University of Anbar in Iraq. The notes cover topics such as immediate settlement, primary consolidation settlement, secondary compression settlement, consolidation testing methods, and void ratio-effective stress relationships for normally consolidated and overconsolidated soils. Laboratory consolidation tests on soil samples are discussed as a method to determine compression indices, coefficient of permeability, and void ratio-effective stress behavior. Disturbance effects on consolidation testing results are also summarized.
Coating Failures & Defects
The document discusses various types of coating failures and defects such as blistering, chalking, cracking, cratering, fading, and more. For each one, it provides the causes such as osmotic gradients, soluble salts, corrosion products, thermal gradients, compressive stress, ultraviolet light, and more. It also lists ways to prevent the failures and defects, which include proper surface preparation, application of suitable coating systems, using light stable pigments, flexible coatings, correct application techniques and more.
Trickling filter ppt
The document discusses trickling filters, which are used in sewage treatment to remove suspended solids and dissolved organic loads from wastewater. Trickling filters use microbial populations attached to a filter media to break down organic matter. They consist of a rotating arm that sprays wastewater over a rock or plastic media, with wastewater collected below for further treatment. Trickling filters can be designed as low or high rate systems, with high rate filters having greater organic loading, hydraulic loading, and recirculation ratios compared to low rate filters. Operational issues include ponding, odors, and fly nuisance that can occur if the filters become anaerobic or clogged.
Residuals of industrial wastewater treatment
This document discusses residuals produced from industrial wastewater treatment and options for managing and disposing of them. Major residuals include sludge, concentrate/brines, spent resins, and air emissions. The appropriate disposal option depends on the waste characteristics and regulatory requirements. Disposal options for liquids include discharge to a publicly owned treatment works (POTW), underground injection, or direct discharge. For solids, options include landfill disposal depending on whether the waste is hazardous or contains radionuclides. The document provides detailed guidelines for selecting a disposal method based on waste and site-specific conditions.
Study of failures on flexible pavements & problems on road users
This document summarizes a study on failures of flexible pavements and issues for road users. It describes the purpose of pavements to carry traffic smoothly and distribute loads to the subgrade. Common types of failures include cracking (alligator, longitudinal, transverse), surface deformations (rutting, shoving), and disintegration (potholes, patches). Cracking allows moisture infiltration and causes roughness. Surface defects like bleeding reduce skid resistance. Non-destructive testing methods like liquid penetration and visual inspection are used to detect failures. Causes of failures include heavy traffic, low maintenance, use of low quality materials, and overloading of trucks. Proper control of vehicle loads and regular maintenance are needed to prevent damages and
Filtration ppt By Mayank Oza
This document discusses different types of water filtration processes. It describes slow sand gravity filters and rapid sand gravity filters. It explains the filtration materials used like sand, gravel and anthracite. Sand used as a filter material should be hard, uniformly sized, free from impurities and resistant. Gravel and anthracite are also used. Filters are classified as gravity filters like slow sand and rapid sand filters, and pressure filters like horizontal and vertical pressure filters. Slow sand filters have low filtration rates but are suitable for rural areas. Rapid sand filters have higher filtration rates and require less space. Pressure filters operate under pressure within a closed cylinder.
Sludge digestor
This document summarizes different types of sludge treatment processes. It discusses aerobic and anaerobic digestion. Aerobic digestion occurs in the presence of oxygen and is used for secondary sludge. Anaerobic digestion occurs without oxygen and reduces sludge volume by 1/3 by converting it to gases, acids and alcohols. The document also describes factors affecting digestion like temperature and pH, types of sludge digestors like standard rate and high rate digestors, gas production from sludge, and moisture content of raw and treated sludge.
Dense Bituminous macadam
Dense Bituminous Macadam (DBM) is a binder course used for roads with more number of heavy commercial vehicles and a close-graded premix material having a voids content of 5-10 per cent.
NON DESTRUCTIVE TESTING
Non-destructive testing methods can provide information about the properties of existing concrete structures without damaging them. Various methods are described in the document, including rebound hammer testing, ultrasonic pulse velocity testing, and radioactive methods. These methods measure physical properties like hardness, ultrasonic pulse transmission, and density that can help indicate characteristics like strength and uniformity or detect issues like cracking and honeycombing. Interpretation requires calibration and accounting for factors like materials and curing conditions. The goal of non-destructive testing is to evaluate concrete quality, strength, integrity, reinforcement, and signs of deterioration.
Pavement Materials Bitumen
This document provides information on bitumen, which is used as a binding material in pavements. It discusses the types of bitumen including paving grade, modified, cutback and emulsion. Cutback bitumen has solvents added to increase fluidity while bitumen emulsion uses water. Modified bitumen has additives added to improve properties. The document also describes various tests conducted on bitumen like penetration, ductility, softening point and viscosity to determine hardness and grading. Bitumen requirements include adequate viscosity and adhesion properties. The grading of bitumen depends on the results of penetration tests.
pavement materials:aggregates
This document discusses the types and properties of aggregates used in pavement construction. It describes aggregates as being fine (less than 4.75mm) or coarse (greater than 4.75mm) and coming from various natural sources like igneous, metamorphic, or sedimentary rock. It also discusses the importance of aggregate properties like strength, hardness, toughness, shape, adhesion to bitumen, and durability. Common tests to evaluate aggregates are described, such as crushing, abrasion, impact, absorption, and adhesion tests.
Construction and repair chemicals
The document discusses various construction and repair chemicals. It describes 21 categories of chemicals including injecting grouts, rust converters, corrosion inhibitors, passivating coats, bonding coats, plasticizers, super plasticizers, shrinkage reducing compounds, self-flowing micro concrete, polymer/epoxies in repair mortar, quick setting compounds, retarders, curing compounds, shutter oils, floor hardeners, waterproofing compounds, air entraining agents, anti-carbonation protective coatings, protective coats for steel, acid resistance enhancers, and anchoring compounds. Each category lists several product examples and describes their chemical composition and applications.
What's hot (20)
Distress of concrete structures & their repair techniques
Distress of concrete structures & their repair techniques
Study of failures on flexible pavements & problems on road users
Study of failures on flexible pavements & problems on road users
Viewers also liked
Painting procedure rev 0 (d 1157)
This document provides procedures for surface preparation and protective coating of carbon steel. It outlines responsibilities, safety requirements, surface preparation methods including abrasive blasting, coating application procedures, materials, and record keeping. The foreman and QC engineer are responsible for ensuring work complies with specifications. Proper abrasive blasting is required to achieve a 2-2.5 mil surface profile. A three-coat paint system consisting of a zinc-rich epoxy primer, epoxy mid-coat, and polyurethane finish coat is specified, with total dry film thickness of 10 mils. Inspection reports are required to document compliance.
Aramco inspection handbook
This document provides guidance for inspectors on paints and coatings. It outlines approved coating systems for various applications and services, including internal and external pipe coatings for buried, insulated, and atmospheric exposure conditions. It also provides standards on surface preparation, coating application, thickness measurement, and repair. Inspectors are instructed to follow the coating manufacturer's recommendations and use properly calibrated equipment to ensure coatings meet thickness and cure requirements.
As 4822 2008 external field joint coatings for steel pipelines
This document provides standards for external field joint coatings applied to steel pipelines. It specifies requirements for selecting coatings, applicator obligations, surface preparation, application, inspection, testing, repair and safety. The standards cover petrolatum or polymeric tape coatings, heat-shrinkable coatings, fusion-bonded epoxy powder coatings, and liquid applied coatings. Appendices provide additional guidelines for purchasing, demonstrating compliance, and testing methods.
BGAS Training | CSWIP Training | API, NDT And ISO Training | WPS/WPQR Trainin...
This document discusses inspection levels and the duties of coating inspectors at different stages of a coating project. It describes three levels of inspection - full, intermittent, and occasional. The duties of inspectors include spotting potential defects, ensuring issues are addressed, and monitoring work at various stages including before and during surface preparation, paint application, and after application. Inspection instruments are used to assess surface cleanliness, profile, thickness, and other attributes. Inspectors help ensure coating work meets specifications.
Method of Statement - Painting works
This document outlines the method statement for painting works which includes obtaining color scheme and paint manufacturer approval before starting work. It also details protecting fittings and surfaces, ensuring substrates are dry and cleaned before applying coating, thoroughly mixing and applying paint in a way that avoids imperfections, and priming surfaces as required. The workscope applies to all building works and specifies approved paint brands and storage as well as brushes and rollers as tools.
Concrete method rev02
This document outlines the method statement for concrete work and formwork for the construction of buildings at Cai Mep International Container Terminal. It details the procedures for rebar work, formwork installation, concrete casting, curing, and formwork removal. The scope of work includes construction of a security office, amenity block, container freight station, and container gate using reinforced concrete and steel structures. Diagrams in the appendix illustrate the casting concrete and formwork installation methods. Safety controls and compliance with technical specifications and drawings are also addressed.
Method painting works emulsion paint
This document provides a method statement for exterior and interior emulsion paint work for the Cai Mep International Container Terminal project. It outlines the purpose, scope of work, reference technical specifications, work procedures, quality control measures, and safety controls. The work procedures describe the surface preparation, application of skimcoat and paint layers, thickness checks, and completion. Quality control includes an inspection and testing plan for deliveries and layer thicknesses. Safety controls focus on education, hazard prevention, and signage.
Building work method statement cm - ms- bw - 001
This document provides a method statement for building construction works for the Cai Mep International Container Terminal project. It outlines the scope of works, reference documents, construction procedures and quality control measures. The construction work will involve earthworks, piling, reinforced concrete works, structural steelworks, architectural works and M&E installations. Procedures are provided for excavation, backfilling, pile driving, concrete works and other construction activities. Quality control measures include material inspections and testing to ensure compliance with specifications.
Hazard Identification And Risk Assessment
The document discusses hazard identification and risk assessment practices at IFFCO-Aonla, an ammonia and urea manufacturing plant in India. It describes how the plant systematically identifies hazards across its various departments and assesses associated risks through methods like HAZOP, HAZAN, Dow index analysis, and risk matrix assessment. Major hazards are identified as fires, explosions, chemical leaks, and thermal exposure. Control measures are documented and risks are classified as intolerable, substantial, moderate or tolerable. The plant closely monitors accidents and implements risk analysis during any process changes to minimize hazards and risks of loss to human life and property.
RESUME OF QAQC INSPECTOR COATING/PAINTING AND INSULATION
I ‘am Certified Coating Inspector for SSPC Level 2 of PCI - Protective Coating Inspector American Standards Equivalent of NACE 2, CSWIP-BGAS 2 and FROSIO 3, and have Experience for all Insulation Works Likes: Cryogenic Insulation Cold Box Equipment, Tank for Polyurethane Foam Insulation of Double Walls, Tank Insulation External Wall and Thermal Insulation for Piping and Mechanical Equipment"
Method statement painting
This document outlines Qatar Building Engineering Company's site work procedure for building painting works. It details the objectives, scope, references, and procedures for applying decorative paints to buildings. The procedure specifies that all paint materials must be approved brands and makes from Qatar Petroleum. It also describes the surface preparation, priming, application of filler coats, undercoats and finishing coats, inspection requirements, and records that must be kept. The goal is to properly prepare surfaces and apply multiple coats of paint to walls, ceilings, doors, windows and metal works according to Qatar Petroleum's specifications.
PCR
A detailed description about the basic steps involved in the - PCR - Polymerase Chain Reaction, its applications,its limitations and steps to overcome it.
Viewers also liked (12)
As 4822 2008 external field joint coatings for steel pipelines
As 4822 2008 external field joint coatings for steel pipelines
BGAS Training | CSWIP Training | API, NDT And ISO Training | WPS/WPQR Trainin...
BGAS Training | CSWIP Training | API, NDT And ISO Training | WPS/WPQR Trainin...
RESUME OF QAQC INSPECTOR COATING/PAINTING AND INSULATION
RESUME OF QAQC INSPECTOR COATING/PAINTING AND INSULATION
Recently uploaded
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Hematology Analyzer Machine - Complete Blood Count
The CBC machine is a common diagnostic tool used by doctors to measure a patient's red blood cell count, white blood cell count and platelet count. The machine uses a small sample of the patient's blood, which is then placed into special tubes and analyzed. The results of the analysis are then displayed on a screen for the doctor to review. The CBC machine is an important tool for diagnosing various conditions, such as anemia, infection and leukemia. It can also help to monitor a patient's response to treatment.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Recently uploaded (20)
Introduction to AI Safety (public presentation).pptx
Introduction to AI Safety (public presentation).pptx
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Hematology Analyzer Machine - Complete Blood Count
Hematology Analyzer Machine - Complete Blood Count
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT