BKK16-301A Expanding the Enterprise Landscape in Centos

BKK16-309A Open Platform support in UEFI

BKK16-205 RDK-B IoT

BKK16-212: What's broken on ARM64?

BKK16-213 Where's the Hardware?

Linaro has multiple labs and board farms with varying purposes. This session will start with an overview of each of these, their locations, their focus, etc. It will then provide examples and direction on how a Member can add their hardware to a board farm. It will also provide an overview of how a Member or employee can navigate/leverage/check out a board for experimentation and usage (this varies based upon which lab/board farm is being considered, so all will be reviewed) in each of the farm locations. Finally, the session will provide pointers to any respective documentation, user guides, etc. for each of the locations.

BKK16-307 LHG OE Initiative

This presentation by Roman Stratiienko (Software Engineer, Consultant, GlobalLogic) and Stanislav Goncharov (Senior Software Engineer, Consultant, GlobalLogic) was delivered at GlobalLogic Kharkiv Embedded TechTalk #5 on November 22, 2019. Speakers shared their experience and results on the challenge started last year to make porting of cutting edge Android 10 to low-cost Orange Pi Plus 2E platform. They made it open source and available for every embedded s/w enthusiast based on AOSP project and Linux kernel upstream. Event materials: https://www.globallogic.com/ua/events/kharkiv-embedded-techtalk-5/

BKK16-505 Kernel and Bootloader Consolidation and Upstreaming

Software, Over the Air (SOTA) for Automotive Grade Linux (AGL)

Leon Anavi

BKK16-100K1 George Grey, Linaro CEO Opening Keynote

BKK16-507 AOSP builds of Linaro with CI v2

Porting a new architecture (NDS32) to open wrt projectMacpaul Lin

Embedded Recipes 2019 - Linux on Open Source Hardware and Libre Silicon

This talk will explore Open Source Hardware projects relevant to Linux, including boards like BeagleBone, Olimex OLinuXino, Giant board and more. Looking at the benefits and challenges of designing Open Source Hardware for a Linux system, along with BeagleBoard.org’s experience of working with community, manufacturers, and distributors to create an Open Source Hardware platform. In closing also looking at the future, Libre Silicon like RISC-V designs, and where this might take Linux. Drew Fustini

UplinQ - ubuntu linux on the qualcomm® snapdragon™ 600 processor

Satya Harish

從u-boot 移植 NDS32 談嵌入式系統開放原始碼開發的一些經驗Macpaul Lin

LAS16-402: ARM Trusted Firmware – from Enterprise to Embedded

LAS16-402: ARM Trusted Firmware – from Enterprise to Embedded Speakers: Date: September 29, 2016 ★ Session Description ★ ARM Trusted Firmware has established itself as a key part of the ARMv8-A software stack. Broadening its applicability across all segments, from embedded to enterprise, is challenging. This session discusses the latest developments, including extension into the 32-bit space. ★ Resources ★ Etherpad: pad.linaro.org/p/las16-402 Presentations & Videos: http://connect.linaro.org/resource/las16/las16-402/ ★ Event Details ★ Linaro Connect Las Vegas 2016 – #LAS16 September 26-30, 2016 http://www.linaro.org http://connect.linaro.org

BKK16-210 Migrating to the new dispatcher

LAS16-200: SCMI - System Management and Control Interface

Title: SCMI - System Management and Control Interface Abstract: In this session we present a new standard proposal for system control and management. The industry, both in high end mobile and enterprise, is trending towards the use of power and system controllers. In most cases the controllers have very similar communication mechanisms between application processors and controllers. In addition, these controllers generally provide very similar functions, e.g. DVFS, power domain management, sensor management. This standard proposal provides an extensible, OS agnostic, and virtualizable interface to access these functions. Speaker(s):Charles Garcia-Tobin

LAS16-200: Firmware summit - Tianocore Progress and Status

What is the merge window?

Macpaul Lin

Embedding Linux For An Automotive Environment

FSCONS

Running Linux on an embedded node in the automotive environment adds a number of new challenges that have to be addressed. One of the problems we have been working on is start-up times. We have trimmed the start-up time of the Linux kernel in less than 0.2 seconds on low end hardware. This presentation will look into and discuss some of the trade-offs we did to get the system starting up quicker on a limited hardware. In an automotive environment many systems have to have there communication up within factions of a second, as the car get more complex more CPU power is needed in many different places. Traditional automotive solutions have been using two CPU’s on each node one small quick starting to handle the communication and one for the applications. If only one CPU can get the main applications starting quick enough that can make the hardware both simpler and cheaper. About Mecel Mecel is a systems and software development company with more than 25 years of experience in developing solutions for the automotive industry. We specialize in in-car communication technologies, user interface development and consumer device interaction.

BKK16-500K2 CTO talk - The End to End Story

Kernel Recipes 2017 - Developing an embedded video application on dual Linux ...

Embedded video tends to be an increasing subject in embedded Linux developments. Even if ARM SOCs provide great resources for video treatment with dedicated IPU, GPU …, a dual approach based on FPGA + general purpose processor is an interesting alternative. In this presentation Christian Charreyre will provide a return of experience of a video acquisition and treatment application developed on a Zynq board, with focus on interactions between the FPGA part and Linux. The presentation will also describe the embedded Linux development choices, based on standard meta-xilinx Yocto layer instead of current solutions using PetaLinux or WindRiver Pulsar. The typical audience is people interested in embedded Linux solutions using a mixed architecture between a general purpose processor and a specialized co-processor. Attendees will receive informations on the relationships between the Linux environment and the FPGA about hardware description, boot mechanism, necessary customizations of Yocto recipes, and much more. Christian Charreyre, CIO Systèmes Embarqués

The role of_open_source_firmware_in_risc-v

Automotive Grade Linux and systemd

Alison Chaiken

The future of RISC-V Supervisor Binary Interface(SBI)

HKG15-110: ODP Project Update

HKG15-110: ODP Project Update --------------------------------------------------- Speaker: Bill Fischofer Date: February 9, 2015 --------------------------------------------------- ★ Session Summary ★ This session provides a summary of ODP activities since LCU ‰Û÷14 and highlights the main features of ODP v1.0 for applications as well as the validations used by conforming ODP implementation. -------------------------------------------------- ★ Resources ★ Pathable: https://hkg15.pathable.com/meetings/250771 Video: https://www.youtube.com/watch?v=xABcGPOCOuU Etherpad: http://pad.linaro.org/p/hkg15-110 --------------------------------------------------- ★ Event Details ★ Linaro Connect Hong Kong 2015 - #HKG15 February 9-13th, 2015 Regal Airport Hotel Hong Kong Airport --------------------------------------------------- http://www.linaro.org http://connect.linaro.org

BKK16-405 LNG Future Directions

What's hot

Open source Android 10 on Orange Pi: Meth or Reality?

GlobalLogic Ukraine

BKK16-505 Kernel and Bootloader Consolidation and Upstreaming

Software, Over the Air (SOTA) for Automotive Grade Linux (AGL)

Leon Anavi

BKK16-100K1 George Grey, Linaro CEO Opening Keynote

BKK16-507 AOSP builds of Linaro with CI v2

Porting a new architecture (NDS32) to open wrt projectMacpaul Lin

Embedded Recipes 2019 - Linux on Open Source Hardware and Libre Silicon

UplinQ - ubuntu linux on the qualcomm® snapdragon™ 600 processor

Satya Harish

從u-boot 移植 NDS32 談嵌入式系統開放原始碼開發的一些經驗Macpaul Lin

LAS16-402: ARM Trusted Firmware – from Enterprise to Embedded

BKK16-210 Migrating to the new dispatcher

LAS16-200: SCMI - System Management and Control Interface

LAS16-200: Firmware summit - Tianocore Progress and Status

What is the merge window?

Macpaul Lin

Embedding Linux For An Automotive Environment

FSCONS

BKK16-500K2 CTO talk - The End to End Story

Kernel Recipes 2017 - Developing an embedded video application on dual Linux ...

The role of_open_source_firmware_in_risc-v

Automotive Grade Linux and systemd

Alison Chaiken

The future of RISC-V Supervisor Binary Interface(SBI)

What's hot (20)

Open source Android 10 on Orange Pi: Meth or Reality?

BKK16-505 Kernel and Bootloader Consolidation and Upstreaming

Software, Over the Air (SOTA) for Automotive Grade Linux (AGL)

BKK16-100K1 George Grey, Linaro CEO Opening Keynote

BKK16-507 AOSP builds of Linaro with CI v2

Porting a new architecture (NDS32) to open wrt project

Embedded Recipes 2019 - Linux on Open Source Hardware and Libre Silicon

UplinQ - ubuntu linux on the qualcomm® snapdragon™ 600 processor

從u-boot 移植 NDS32 談嵌入式系統開放原始碼開發的一些經驗

LAS16-402: ARM Trusted Firmware – from Enterprise to Embedded

BKK16-210 Migrating to the new dispatcher

LAS16-200: SCMI - System Management and Control Interface

LAS16-200: Firmware summit - Tianocore Progress and Status

What is the merge window?

Embedding Linux For An Automotive Environment

BKK16-500K2 CTO talk - The End to End Story

Kernel Recipes 2017 - Developing an embedded video application on dual Linux ...

The role of_open_source_firmware_in_risc-v

Automotive Grade Linux and systemd

The future of RISC-V Supervisor Binary Interface(SBI)

Viewers also liked

HKG15-110: ODP Project Update

BKK16-405 LNG Future Directions

BKK16-103 OpenCSD - Open for Business!

BKK16-408B Data Analytics and Machine Learning From Node to Cluster

BKK16-300K2 Shane Coughlan Harald Welte Keynotes

BKK16-202 LMG Lightning Talks A collection of short and interesting topics wr...

BKK16-502 Suspend to Idle

HKG15-411: Browser Testing Framework for LHG

HKG15-411: Browser Testing Framework for LHG --------------------------------------------------- Speaker: Trevor Woerner, Will Chen Date: February 12, 2015 --------------------------------------------------- ★ Session Summary ★ The purpose of this talk is to provide the audience with an introduction to the testing framework used in Web browser performance testing as implemented by LHG. The browser test suite is used to compare browser performance and compliance by using a series of benchmarks in key test categories. Sample browser results for both Android and RDK will be presented. -------------------------------------------------- ★ Resources ★ Pathable: https://hkg15.pathable.com/meetings/250839 Video: https://www.youtube.com/watch?v=TtAMRnzB2nw Etherpad: http://pad.linaro.org/p/hkg15-411 --------------------------------------------------- ★ Event Details ★ Linaro Connect Hong Kong 2015 - #HKG15 February 9-13th, 2015 Regal Airport Hotel Hong Kong Airport --------------------------------------------------- http://www.linaro.org http://connect.linaro.org

LCA14: LCA14-110: FLOSS Training

Adrian Perreau de Pinninck

Viewers also liked (9)

HKG15-110: ODP Project Update

BKK16-405 LNG Future Directions

BKK16-103 OpenCSD - Open for Business!

BKK16-408B Data Analytics and Machine Learning From Node to Cluster

BKK16-300K2 Shane Coughlan Harald Welte Keynotes

BKK16-202 LMG Lightning Talks A collection of short and interesting topics wr...

BKK16-502 Suspend to Idle

HKG15-411: Browser Testing Framework for LHG

LCA14: LCA14-110: FLOSS Training

Similar to BKK16-301A Expanding the Enterprise Landscape in Centos

Freedomotic v5.5 Changelog

freedomotic

Civil Infrastructure Platform: Industrial Grade SLTS Kernel and Base-layer De...

Yoshitake Kobayashi

The Civil Infrastructure Platform (CIP) is creating a super long-term supported (SLTS) open source "base layer" for industrial grade software. We have been working on security fixes and some backported features since the moment we decided that Linux kernel v4.4 would be the first SLTS version. In this talk, we will describe the current development status of the SLTS kernel and testing environment. First, we'll explain our kernel development policy. Then, we'll describe the functionality that has been backported. Second, we'll talk about testing before using our base-layer on real products. We have been developing a test framework to collect and share test results. To build it, we don't want to duplicate existing work such as KernelCI, Fuego and others. For that reason, we are trying to collaborate and contribute to such projects.

Git essential training & sharing self

Chen-Tien Tsai

Horizon view technical deep diveMurugesan Arumugam

What’s New in CloudStack 4.19 - Abhishek Kumar - ShapeBlue

ShapeBlue

This session gives a brief introduction of the new and exciting feature in the latest (upcoming) CloudStack LTS release, ie, 4.19.0. The discussion includes the details on the timeline of the CloudStack 4.19.0 release, overview of some of the marquee, new feature of the release – Object storage framework, KVM ingestion, Hypervisor agnostic simple DRS, CAPC aware CKS, OAuth2, DRaaS with Multi zone disaster recovery, etc and a summary of improvements added since the previous major LTS release of the CloudStack, ie, 4.18.0. ----------------------------------------- The CloudStack Collaboration Conference 2023 took place on 23-24th November. The conference, arranged by a group of volunteers from the Apache CloudStack Community, took place in the voco hotel, in Porte de Clichy, Paris. It hosted over 350 attendees, with 47 speakers holding technical talks, user stories, new features and integrations presentations and more.

ArgoCD and Tekton: Match made in Kubernetes heaven | DevNation Tech Talk

Red Hat Developers

Tekton Pipelines is an open-source project that focuses on providing a Kubernetes-native, lightweight, easy-to-manage serverless CI/CD framework. Tekton is built for Kubernetes and runs delivery pipelines in pods to scale on demand, and allow teams to fully control their pipelines and dependencies. ArgoCD is a declarative GitOps operator and makes continuous delivery possible by using Git as source of truth for declarative infrastructure and applications. In this session, you will learn how to combine the power of Tekton Pipelines with ArgoCD for a declarative approach to CI/CD based on GitOps principles.

Delivery at Scale

Have you ever wondered how large software companies with an engineering culture make sure they are able to deliver software over and over to production? How do you coordinate 100+ software engineers so that there are no bottlenecks and quality is not compromised? In this talk you will see how a Continuous Delivery system was implemented at Criteo, the fastest growing IT company in EMEA 2012. Before starting the project there were 160+ code repositories with dependency hell. They were being built independently and releases to production were error prone and painful. You will see the technical architecture behind a successful implementation of a Continuous Delivery system. The system was made up of a Gerrit code review tool connected to a Jenkins build pipeline, building 160 repositories with over 7M lines of code. We will explore different architectural choices such as branching system, hot fixes, sandbox and pre-production environments, and how these were developed and used by the large R&D department. Authors: Adrian Perreau de Pinninck, Manu Cupcic

Delivery at Scale

Agilar

Authors: Adrian Perreau de Pinninck, Manu Cupcic Conference: CAS 2014 (Barcelona) Have you ever wondered how large software companies with an engineering culture make sure they are able to deliver software over and over to production? How do you coordinate 100+ software engineers so that there are no bottlenecks and quality is not compromised? In this talk you will see how a Continuous Delivery system was implemented at Criteo, the fastest growing IT company in EMEA 2012. Before starting the project there were 160+ code repositories with dependency hell. They were being built independently and releases to production were error prone and painful. You will see the technical architecture behind a successful implementation of a Continuous Delivery system. The system was made up of a Gerrit code review tool connected to a Jenkins build pipeline, building 160 repositories with over 7M lines of code. We will explore different architectural choices such as branching system, hot fixes, sandbox and pre-production environments, and how these were developed and used by the large R&D department.

Bringing Tizen to a Raspberry Pi 2 Near You

Samsung Open Source Group

Webinar: Capabilities, Confidence and Community – What Flux GA Means for You

Flux, the original GitOps project, began its development in a small London office back in 2017 with the goal to bring continuous delivery (CD) to developers, platform and cluster operators working with Kubernetes. From donating the project to the CNCF, its continued growth within the cloud native community, to its achievement of passing rigorous battle tests for security, longevity and governance, it’s little wonder that Flux v2 has reached yet another celebratory milestone – General Availability (GA). Flux is the GitOps platform of choice for many enterprise companies such as SAP, Volvo Cars, and Axel Springer; and is embedded within AKS, Azure Arc and EKS Anywhere. It provides extensive automation to CI/CD, security and audit trails, and reliability through canary deployments and rollback capabilities. Join this webinar by Flux maintainers and creators and discover: * Latest release features and roadmap for the future. * Interesting use cases for Flux (e.g security). * Flux capabilities you may not be aware of (e.g. extensions). * Joining the vibrant Flux community. * How to leverage Flux in a supported enterprise environment today.

GitOps Testing in Kubernetes with Flux and Testkube.pdf

GitOps is amazing... until you can't apply it! This has been the case mostly for testing where it continues to be more of a push than a pull in organizations' DevOps pipelines. Join us in this talk to learn the benefits of improving your existing testing pipeline with Testkube, an open source project that brings tests inside your Kubernetes cluster, and FluxCD adding the GitOps sprinkles to testing! Speaker: Abdallah Abedraba, Product Leader at Testkube Abdallah works at Testkube, a Kubernetes native testing framework. In his prior experiences, he has tried everything from software engineering to product management, and now working as a Developer Advocate, on open source (a dream of his!) evangelizing all things Testing and Kubernetes. In his free time, he enjoys attending developer conferences and meetups, as well as spending time at the movies and actively listening to music.

SCM (Source Control Management) - Git Basic

Aman Patial

Free GitOps Workshop

Join this info-packed and hands-on workshop where we will cover:  Introduction to Kubernetes & GitOps talk: We'll cover the most popular path that has brought success to many users already - GitOps as a natural evolution of Kubernetes. We'll give an overview of how you can benefit from Kubernetes and GitOps: greater security, reliability, velocity and more. Importantly, we cover definitions and principles standardized by the CNCF's OpenGitOps group and what it means for you.  Get Started with GitOps: You'll have GitOps up and running in about 30 mins using our free and open source tools! We'll give a brief vision of where you want to be with those security, reliability, and velocity benefits, and then we'll support you while go through the getting started steps. During the workshop, you'll also experience in action and see demos for: * an opinionated repo structure to minimize decision fatigue * disaster recovery using GitOps * Helm charts example * Multi-cluster example * all with free and open source tools mostly in the CNCF (eg. Flux and Helm). If you have questions before or after the workshop, talk to us at #weave-gitops http://bit.ly/WeaveGitOpsSlack (If you need to invite yourself to the Slack, visit https://slack.weave.works/)

GitOps with GitHub Actions & Flux by Kingdon Barrett

Watch this presentation here: https://youtu.be/cR2eCMbiZg4 One of the most important features of Flux as a Continuous Delivery solution is that it’s totally agnostic about what Continuous Integration platform is used. FluxCD docs present some valuable ideas about how CI should and should not work, but Flux has a narrow focus and can work with basically any legacy or existing CI you might want to pair with it. During this session, Kingdon Barrett, OSS Engineer at Weaveworks and Flux Maintainer, will discuss the pairing of GitHub Actions (CI) with Flux (CD), presenting some basic common automation patterns and a few approaches to building container images. Then, we will perform a live demonstration of GitHub Actions and three different methods for doing Flux deployment automation using SemVer with GitRepository Source, HelmRelease, and Image Update Automation. If you want to follow along with Kingdon’s demo, the demo content will likely be a little bit more in-depth and technical than usual. There is no preparation that is strictly required to attend but here are some resources you can read ahead of time, to be ahead of the curve: 📌 Flux on GitHub: https://github.com/fluxcd/flux2 📌 Flux Use Case Docs: GitHub Actions Manifest Generation: https://fluxcd.io/docs/use-cases/gh-actions-manifest-generation/ 📌 Automate image updates to Git: https://fluxcd.io/docs/guides/image-update/ 📌 Define a Helm release (notes on SemVer automation): https://fluxcd.io/docs/guides/helmreleases/#define-a-helm-release 📌 Kingdon's Demo Repository: https://github.com/kingdonb/github-actions-demo

Free GitOps Workshop (with Intro to Kubernetes & GitOps)

View this video on Youtube here: https://youtu.be/tK4S8y3j5TA In this info-packed and hands-on workshop we covered:  Introduction to Kubernetes & GitOps talk: We covered the most popular path that has brought success to many users already - GitOps as a natural evolution of Kubernetes. We'll give an overview of how you can benefit from Kubernetes and GitOps: greater security, reliability, velocity and more. Importantly, we cover definitions and principles standardized by the CNCF's OpenGitOps group and what it means for you.  Get Started with GitOps: You'll have GitOps up and running in about 30 mins using our free and open source tools! We'll give a brief vision of where you want to be with those security, reliability, and velocity benefits, and then we'll support you while go through the getting started steps. During the workshop, you'll also experience in action and see demos for: - an opinionated repo structure to minimize decision fatigue - disaster recovery using GitOps - Helm charts example - Multi-cluster example - all with free and open source tools mostly in the CNCF (eg. Flux and Helm). If you have questions before or after the workshop, talk to us at #weave-gitops http://bit.ly/WeaveGitOpsSlack (If you need to invite yourself to the Slack, visit https://slack.weave.works/)

PHP Unconference Continuous Integration

Nils Hofmeister

KubeCon EU 2022 Istio, Flux & Flagger.pdf

Distributed Proxies have opened the floodgates for Service Meshes to provide substantial value at the Application Networking Layer, but early adopters of Service Meshes are often overwhelmed by operational complexities. How do you ensure that the proxy is distributed everywhere your software runs? How do you safely upgrade or roll back all those proxies? How can you ensure that your network config is correct - without pushing it to production and risking an outage? Following the GitOps Principles is key to simplifying Service Mesh Operations. Defining the entire service mesh declaratively - be it installation, proxy injection, or configuration - provides a mechanism to safely manage the complexities of a service mesh. Continuously reconciling declarative config with the latest service mesh release keeps you from being caught off-guard by CVEs. Progressive Delivery tools enable seamless movement from one version of a service mesh to another - and back - with minimal impact to traffic.

XPDDS18: Xen Project Weather Report 2018

The Linux Foundation

BLUG 2012 Version Control for Notes Developers

Martin Jinoch

Continious integration pipeline

GomathiNayagam S

Similar to BKK16-301A Expanding the Enterprise Landscape in Centos (20)

Freedomotic v5.5 Changelog

Civil Infrastructure Platform: Industrial Grade SLTS Kernel and Base-layer De...

Git essential training & sharing self

Horizon view technical deep dive

What’s New in CloudStack 4.19 - Abhishek Kumar - ShapeBlue

ArgoCD and Tekton: Match made in Kubernetes heaven | DevNation Tech Talk

Delivery at Scale

Bringing Tizen to a Raspberry Pi 2 Near You

Webinar: Capabilities, Confidence and Community – What Flux GA Means for You

GitOps Testing in Kubernetes with Flux and Testkube.pdf

SCM (Source Control Management) - Git Basic

Free GitOps Workshop

GitOps with GitHub Actions & Flux by Kingdon Barrett

Free GitOps Workshop (with Intro to Kubernetes & GitOps)

PHP Unconference Continuous Integration

KubeCon EU 2022 Istio, Flux & Flagger.pdf

XPDDS18: Xen Project Weather Report 2018

BLUG 2012 Version Control for Notes Developers

Continious integration pipeline

More from Linaro

Deep Learning Neural Network Acceleration at the Edge - Andrea Gallo

Short The growing amount of data captured by sensors and the real time constraints imply that not only big data analytics but also Machine Learning (ML) inference shall be executed at the edge. The multiple options for neural network acceleration in Arm-based platforms provide an unprecedented opportunity for new intelligent devices. It also raises the risk of fragmentation and duplication of efforts when multiple frameworks shall support multiple accelerators. Andrea Gallo, Linaro VP of Segment Groups, will summarise the existing NN frameworks, accelerator solutions, and will describe the efforts underway in the Arm ecosystem. Abstract The dramatically growing amount of data captured by sensors and the ever more stringent requirements for latency and real time constraints are paving the way for edge computing, and this implies that not only big data analytics but also Machine Learning (ML) inference shall be executed at the edge. The multiple options for neural network acceleration in recent Arm-based platforms provides an unprecedented opportunity for new intelligent devices with ML inference. It also raises the risk of fragmentation and duplication of efforts when multiple frameworks shall support multiple accelerators. Andrea Gallo, Linaro VP of Segment Groups, will summarise the existing NN frameworks, model description formats, accelerator solutions, low cost development boards and will describe the efforts underway to identify the best technologies to improve the consolidation and enable the competitive innovative advantage from all vendors. Audience The session will be useful for executives to engineers. Executives will gain a deeper understanding of the issues and opportunities. Engineers at NN acceleration IP design houses will take away ideas for how to collaborate in the open source community on their area of expertise, how to evaluate the performance and accelerate multiple NN frameworks without modifying them for each new IP, whether it be targeting edge computing gateways, smart devices or simple microcontrollers. Benefits to the Ecosystem The AI deep learning neural network ecosystem is starting just now and it has similar implications with open source as GPU and video accelerators had in the early days with user space drivers, binary blobs, proprietary APIs and all possible ways to protect their IPs. The session will outline a proposal for a collaborative ecosystem effort to create a common framework to manage multiple NN accelerators while at the same time avoiding to modify deep learning frameworks with multiple forks.

Arm Architecture HPC Workshop Santa Clara 2018 - Kanta Vekaria

Huawei’s requirements for the ARM based HPC solution readiness - Joshua Mora

Talk Title: Huawei’s requirements for the ARM based HPC solution readiness Talk Abstract: A high level review of a wide range of requirements to architect an ARM based competitive HPC solution is provided. The review combines both Industry and Huawei’s unique views with the intend to communicate openly not only the alignment and support in ongoing efforts carried over by other ARM key players but to brief on the areas of differentiation that Huawei is investing towards the research, development and deployment of homegrown ARM based HPC solution(s). Speaker: Joshua Mora Speaker Bio: 20 years of experience in research and development of both software and hardware for high performance computing. Currently leading the architecture definition and development of ARM based HPC solutions, both hardware and software, all the way to the applications (ie. turnkey HPC solutions for different compute intensive markets where ARM will succeed !!).

Bud17 113: distribution ci using qemu and open qa

“Delivering a well working distribution is hard. There are a lot of different hardware platforms that need to be verified and the software stack is in a big flux during development phases. In rolling releases, this gets even worse, as nothing ever stands still. The only sane answer to that problem are working Continuous Integration tests. The SUSE way to check whether any change breaks normal distribution behavior is OpenQA. Using OpenQA we can automatically run tests that hard working QA people did manually in the old days. That way we have fast enough turnaround times to find and reject breaking changes This session shows how OpenQA works, what pitfalls we had to make ARM work with OpenQA and what we’re doing to improve it for ARM specific use cases.”

OpenHPC Automation with Ansible - Renato Golin - Linaro Arm HPC Workshop 2018

Speaker: Renato Golin Speaker Bio: He started programming in the late 80's in C for PCs after a few years playing with 8-bit computers, but he only started programming professionally in the late 90's during the .com bubble. After many years working on Internet's back-end, he moved to UK and worked a few years on bioinformatics at EBI before joining ARM, where he worked on the DS-5 debugger and on the EDG-to-LLVM bridge, where he became the LLVM Tech Lead. Recently, he worked with large clusters and big data at HPCC before moving to Linaro. Talk Title: OpenHPC Automation with Ansible Talk Abstract: "In order to test OpenHPC packages and components and to use it as a platform to benchmark HPC applications, Linaro is developing an automated deployment strategy, using Ansible, Mr-Provisioner and Jenkins, to install the OS, OpenHPC and prepare the environment on varied architectures (Arm, x86). This work is meant to replace the existing ageing Bash-based recipes upstream while still keeping the documents intact. Our aim is to make it easier to vary hardware configuration, allow for different provisioning techniques and mix internal infrastructure logic to different labs, while still using the same recipes. We hope this will help more people use OpenHPC with a better out-of-the-box experience and with more robust results"

HPC network stack on ARM - Linaro HPC Workshop 2018

Speaker: Pavel Shamis Company: Arm Speaker Bio: "Pavel is a Principal Research Engineer at ARM with over 16 years of experience in development HPC solutions. His work is focused on co-design software and hardware building blocks for high-performance interconnect technologies, development communication middleware and novel programming models. Prior to joining ARM, he spent five years at Oak Ridge National Laboratory (ORNL) as a research scientist at Computer Science and Math Division (CSMD). In this role, Pavel was responsible for research and development multiple projects in high-performance communication domain including: Collective Communication Offload (CORE-Direct & Cheetah), OpenSHMEM, and OpenUCX. Before joining ORNL, Pavel spent ten years at Mellanox Technologies, where he led Mellanox HPC team and was one of the key driver in enablement Mellanox HPC software stack, including OFA software stack, OpenMPI, MVAPICH, OpenSHMEM, and other. Pavel is a recipient of prestigious R&D100 award for his contribution in development of the CORE-Direct collective offload technology and he published in excess of 20 research papers. " Talk Title: HPC network stack on ARM Talk Abstract: Applications, programming languages, and libraries that leverage sophisticated network hardware capabilities have a natural advantage when used in today¹s and tomorrow's high-performance and data center computer environments. Modern RDMA based network interconnects provides incredibly rich functionality (RDMA, Atomics, OS-bypass, etc.) that enable low-latency and high-bandwidth communication services. The functionality is supported by a variety of interconnect technologies such as InfiniBand, RoCE, iWARP, Intel OPA, Cray¹s Aries/Gemini, and others. Over the last decade, the HPC community has developed variety user/kernel level protocols and libraries that enable a variety of high-performance applications over RDMA interconnects including MPI, SHMEM, UPC, etc. With the emerging availability HPC solutions based on ARM CPU architecture it is important to understand how ARM integrates with the RDMA hardware and HPC network software stack. In this talk, we will overview ARM architecture and system software stack, including MPI runtimes, OpenSHMEM, and OpenUCX.

It just keeps getting better - SUSE enablement for Arm - Linaro HPC Workshop ...

Speaker: Jay Kruemcke Speaker Company: SUSE Bio: "Jay is responsible for the SUSE Linux server products for High Performance Computing, 64-bit ARM systems, and SUSE Linux for IBM Power servers. Jay has built an extensive career in product management including using social media for client collaboration, product positioning, driving future product directions, and evangelizing the capabilities and future directions for dozens of enterprise products. " Talk Title: It just keeps getting better - SUSE enablement for Arm Talk Abstract: SUSE has been delivering commercial Linux support for Arm based servers since 2016. Initially the focus was on high end servers for HPC and Ceph based software defined storage. But we have enabled a number of other Arm SoCs and are even supporting the Raspberry Pi. This session will cover the SUSE products that are available for the Arm platform and view to the future.

Intelligent Interconnect Architecture to Enable Next Generation HPC - Linaro ...

Speakers: Gilad Shainer and Scot Schultz Company: Mellanox Technologies Talk Title: Intelligent Interconnect Architecture to Enable Next Generation HPC Talk Abstract: The latest revolution in HPC interconnect architecture is the development of In-Network Computing, a technology that enables handling and accelerating application workloads at the network level. By placing data-related algorithms on an intelligent network, we can overcome the new performance bottlenecks and improve the data center and applications performance. The combination of In-Network Computing and ARM based processors offer a rich set of capabilities and opportunities to build the next generation of HPC platforms. Gilad Shainer Bio: Gilad Shainer has served as Mellanox's vice president of marketing since March 2013. Previously, Mr. Shainer was Mellanox's vice president of marketing development from March 2012 to March 2013. Mr. Shainer joined Mellanox in 2001 as a design engineer and later served in senior marketing management roles between July 2005 and February 2012. Mr. Shainer holds several patents in the field of high-speed networking and contributed to the PCI-SIG PCI-X and PCIe specifications. Gilad Shainer holds a MSc degree (2001, Cum Laude) and a BSc degree (1998, Cum Laude) in Electrical Engineering from the Technion Institute of Technology in Israel. Scot Schultz Bio: Scot Schultz is a HPC technology specialist with broad knowledge in operating systems, high speed interconnects and processor technologies. Joining the Mellanox team in 2013, Schultz is 30-year veteran of the computing industry. Prior to joining Mellanox, he spent the past 17 years at AMD in various engineering and leadership roles in the area of high performance computing. Scot has also been instrumental with the growth and development of various industry organizations including the Open Fabrics Alliance, and continues to serve as a founding board-member of the OpenPOWER Foundation and Director of Educational Outreach and founding member of the HPC-AI Advisory Council.

Yutaka Ishikawa - Post-K and Arm HPC Ecosystem - Linaro Arm HPC Workshop Sant...

Yutaka Ishikawa - Post-K and Arm HPC Ecosystem - Linaro Arm HPC Workshop Santa Clara 2018 Bio: "Yutaka Ishikawa is the project leader of developing the post K supercomputer. From 1987 to 2001, he was a member of AIST (former Electrotechnical Laboratory), METI. From 1993 to 2001, he was the chief of Parallel and Distributed System Software Laboratory at Real World Computing Partnership. He led development of cluster system software called SCore, which was used in several large PC cluster systems around 2004. From 2002 to 2014, he was a professor at the University Tokyo. He led a project to design a commodity-based supercomputer called T2K open supercomputer. As a result, three universities, Tsukuba, Tokyo, and Kyoto, obtained each supercomputer based on the specification in 2008. He was also involved with the design of the Oakleaf-PACS, the successor of T2K supercomputer in both Tsukuba and Tokyo, whose peak performance is 25PF." Session Title: Post-K and Arm HPC Ecosystem Session Description: "Post-K, a flagship supercomputer in Japan, is being developed by Riken and Fujitsu. It will be the first supercomputer with Armv8-A+SVE. This talk will give an overview of Post-K and how RIKEN and Fujitsu are currently working on software stack for an Arm architecture."

Andrew J Younge - Vanguard Astra - Petascale Arm Platform for U.S. DOE/ASC Su...

Event: Arm Architecture HPC Workshop by Linaro and HiSilicon Location: Santa Clara, CA Speaker: Andrew J Younge Talk Title: Vanguard Astra - Petascale Arm Platform for U.S. DOE/ASC Supercomputing Talk Desc: The Vanguard program looks to expand the potential technology choices for leadership-class High Performance Computing (HPC) platforms, not only for the National Nuclear Security Administration (NNSA) but for the Department of Energy (DOE) and wider HPC community. Specifically, there is a need to expand the supercomputing ecosystem by investing and developing emerging, yet-to-be-proven technologies and address both hardware and software challenges together, as well as to prove-out the viability of such novel platforms for production HPC workloads. The first deployment of the Vanguard program will be Astra, a prototype Petascale Arm supercomputer to be sited at Sandia National Laboratories during 2018. This talk will focus on the arthictecural details of Astra and the significant investments being made towards the maturing the Arm software ecosystem. Furthermore, we will share initial performance results based on our pre-general availability testbed system and outline several planned research activities for the machine. Bio: Andrew Younge is a R&D Computer Scientist at Sandia National Laboratories with the Scalable System Software group. His research interests include Cloud Computing, Virtualization, Distributed Systems, and energy efficient computing. Andrew has a Ph.D in Computer Science from Indiana University, where he was the Persistent Systems fellow and a member of the FutureGrid project, an NSF-funded experimental cyberinfrastructure test-bed. Over the years, Andrew has held visiting positions at the MITRE Corporation, the University of Southern California / Information Sciences Institute, and the University of Maryland, College Park. He received his Bachelors and Masters of Science from the Computer Science Department at Rochester Institute of Technology (RIT) in 2008 and 2010, respectively.

HKG18-501 - EAS on Common Kernel 4.14 and getting (much) closer to mainline

Session ID: HKG18-501 Session Name: HKG18-501 - EAS on Common Kernel 4.14 and getting (much) closer to mainline Speaker: Chris Redpath Track: Mobile, Kernel ★ Session Summary ★ This session will introduce the changes to EAS planned for 4.14 kernel, and how Arm hopes that EAS will develop in future. EAS has already evolved from an Arm/Linaro joint project to involving a much wider community of SoC vendors, Google and interested device manufacturers. We will highlight the product-specific pieces remaining in the Android Common Kernel EAS implementation, and our plans to provide an upstreaming plan for each product feature. In particular, the new 'simplified energy model' is designed to provide mainline-friendliness and comparable performance using a simple DT expression of cpu power/performance. --------------------------------------------------- ★ Resources ★ Event Page: http://connect.linaro.org/resource/hkg18/hkg18-501/ Presentation: http://connect.linaro.org.s3.amazonaws.com/hkg18/presentations/hkg18-501.pdf Video: http://connect.linaro.org.s3.amazonaws.com/hkg18/videos/hkg18-501.mp4 --------------------------------------------------- ★ Event Details ★ Linaro Connect Hong Kong 2018 (HKG18) 19-23 March 2018 Regal Airport Hotel Hong Kong --------------------------------------------------- Keyword: Mobile, Kernel 'http://www.linaro.org' 'http://connect.linaro.org' --------------------------------------------------- Follow us on Social Media https://www.facebook.com/LinaroOrg https://www.youtube.com/user/linaroorg?sub_confirmation=1 https://www.linkedin.com/company/1026961

HKG18-100K1 - George Grey: Opening Keynote

Session ID: HKG18-100K1 Session Name: HKG18-100K1 - George Grey: Opening Keynote Speaker: George Grey Track: Keynote ★ Session Summary ★ --------------------------------------------------- ★ Resources ★ Event Page: http://connect.linaro.org/resource/hkg18/hkg18-100k1/ Presentation: http://connect.linaro.org.s3.amazonaws.com/hkg18/presentations/hkg18-100k1.pdf Video: http://connect.linaro.org.s3.amazonaws.com/hkg18/videos/hkg18-100k1.mp4 --------------------------------------------------- ★ Event Details ★ Linaro Connect Hong Kong 2018 (HKG18) 19-23 March 2018 Regal Airport Hotel Hong Kong --------------------------------------------------- Keyword: Keynote 'http://www.linaro.org' 'http://connect.linaro.org' --------------------------------------------------- Follow us on Social Media https://www.facebook.com/LinaroOrg https://www.youtube.com/user/linaroorg?sub_confirmation=1 https://www.linkedin.com/company/1026961

HKG18-318 - OpenAMP Workshop

"Session ID: HKG18-318 Session Name: HKG18-318 - OpenAMP Workshop Speaker: Wendy Liang Track: Ecosystem Day ★ Session Summary ★ --------------------------------------------------- ★ Resources ★ Event Page: http://connect.linaro.org/resource/hkg18/hkg18-318/ Presentation: http://connect.linaro.org.s3.amazonaws.com/hkg18/presentations/hkg18-318.pdf Video: http://connect.linaro.org.s3.amazonaws.com/hkg18/videos/hkg18-318.mp4 --------------------------------------------------- ★ Event Details ★ Linaro Connect Hong Kong 2018 (HKG18) 19-23 March 2018 Regal Airport Hotel Hong Kong --------------------------------------------------- Keyword: Ecosystem Day 'http://www.linaro.org' 'http://connect.linaro.org' --------------------------------------------------- Follow us on Social Media https://www.facebook.com/LinaroOrg https://www.youtube.com/user/linaroorg?sub_confirmation=1 https://www.linkedin.com/company/1026961"

HKG18-501 - EAS on Common Kernel 4.14 and getting (much) closer to mainline

"Session ID: HKG18-501 Session Name: HKG18-501 - EAS on Common Kernel 4.14 and getting (much) closer to mainline Speaker: Chris Redpath Track: Mobile, Kernel ★ Session Summary ★ This session will introduce the changes to EAS planned for 4.14 kernel, and how Arm hopes that EAS will develop in future. EAS has already evolved from an Arm/Linaro joint project to involving a much wider community of SoC vendors, Google and interested device manufacturers. We will highlight the product-specific pieces remaining in the Android Common Kernel EAS implementation, and our plans to provide an upstreaming plan for each product feature. In particular, the new 'simplified energy model' is designed to provide mainline-friendliness and comparable performance using a simple DT expression of cpu power/performance. --------------------------------------------------- ★ Resources ★ Event Page: http://connect.linaro.org/resource/hkg18/hkg18-501/ Presentation: http://connect.linaro.org.s3.amazonaws.com/hkg18/presentations/hkg18-501.pdf Video: http://connect.linaro.org.s3.amazonaws.com/hkg18/videos/hkg18-501.mp4 --------------------------------------------------- ★ Event Details ★ Linaro Connect Hong Kong 2018 (HKG18) 19-23 March 2018 Regal Airport Hotel Hong Kong --------------------------------------------------- Keyword: Mobile, Kernel 'http://www.linaro.org' 'http://connect.linaro.org' --------------------------------------------------- Follow us on Social Media https://www.facebook.com/LinaroOrg https://www.youtube.com/user/linaroorg?sub_confirmation=1 https://www.linkedin.com/company/1026961"

HKG18-315 - Why the ecosystem is a wonderful thing, warts and all

"Session ID: HKG18-315 Session Name: HKG18-315 - Why the ecosystem is a wonderful thing warts and all Speaker: Andrew Wafaa Track: Ecosystem Day ★ Session Summary ★ The Arm ecosystem is a vibrant place, but it's not always smooth sailing. This presentation will go through the highs and lows of getting the ecosystem fully Arm enabled. --------------------------------------------------- ★ Resources ★ Event Page: http://connect.linaro.org/resource/hkg18/hkg18-315/ Presentation: http://connect.linaro.org.s3.amazonaws.com/hkg18/presentations/hkg18-315.pdf Video: http://connect.linaro.org.s3.amazonaws.com/hkg18/videos/hkg18-315.mp4 --------------------------------------------------- ★ Event Details ★ Linaro Connect Hong Kong 2018 (HKG18) 19-23 March 2018 Regal Airport Hotel Hong Kong --------------------------------------------------- Keyword: Ecosystem Day 'http://www.linaro.org' 'http://connect.linaro.org' --------------------------------------------------- Follow us on Social Media https://www.facebook.com/LinaroOrg https://www.youtube.com/user/linaroorg?sub_confirmation=1 https://www.linkedin.com/company/1026961"

HKG18- 115 - Partitioning ARM Systems with the Jailhouse Hypervisor

"Session ID: HKG18-115 Session Name: HKG18-115 - Partitioning ARM Systems with the Jailhouse Hypervisor Speaker: Jan Kiszka Track: Security ★ Session Summary ★ The open source hypervisor Jailhouse provides hard partitioning of multicore systems to co-locate multiple Linux or RTOS instances side by side. It aims at low complexity and minimal footprint to achieve deterministic behavior and enable certifications according to safety or security standards. In this session, we would like to look at the ARM-specific status of Jailhouse and discuss applications, to-dos and possible collaborations around it with the ARM community. The session is intended to be half presentation, half Q&A / discussion. --------------------------------------------------- ★ Resources ★ Event Page: http://connect.linaro.org/resource/hkg18/hkg18-115/ Presentation: http://connect.linaro.org.s3.amazonaws.com/hkg18/presentations/hkg18-115.pdf Video: http://connect.linaro.org.s3.amazonaws.com/hkg18/videos/hkg18-115.mp4 --------------------------------------------------- ★ Event Details ★ Linaro Connect Hong Kong 2018 (HKG18) 19-23 March 2018 Regal Airport Hotel Hong Kong --------------------------------------------------- Keyword: Security 'http://www.linaro.org' 'http://connect.linaro.org' --------------------------------------------------- Follow us on Social Media https://www.facebook.com/LinaroOrg https://www.youtube.com/user/linaroorg?sub_confirmation=1 https://www.linkedin.com/company/1026961"

HKG18-TR08 - Upstreaming SVE in QEMU

"Session ID: HKG18-TR08 Session Name: HKG18-TR08 - Upstreaming SVE in QEMU Speaker: Alex Bennée,Richard Henderson Track: Enterprise ★ Session Summary ★ ARM's Scalable Vector Extensions is an innovative solution to processing highly data parallel workloads. While several out-of-tree attempts at implementing SVE support for QEMU existed, we took a fundamentally different approach to solving key challenges and therefore pursued a from-scratch QEMU SVE implementation in Linaro. Our strategic choice was driven by several factors. First as an ""upstream first"" organisation we were focused on a solution that would be readily accepted by the upstream project. This entailed doing our development in the open on the project mailing lists where early feedback and community consensus can be reached. --------------------------------------------------- ★ Resources ★ Event Page: http://connect.linaro.org/resource/hkg18/hkg18-tr08/ Presentation: http://connect.linaro.org.s3.amazonaws.com/hkg18/presentations/hkg18-tr08.pdf Video: http://connect.linaro.org.s3.amazonaws.com/hkg18/videos/hkg18-tr08.mp4 --------------------------------------------------- ★ Event Details ★ Linaro Connect Hong Kong 2018 (HKG18) 19-23 March 2018 Regal Airport Hotel Hong Kong --------------------------------------------------- Keyword: Enterprise 'http://www.linaro.org' 'http://connect.linaro.org' --------------------------------------------------- Follow us on Social Media https://www.facebook.com/LinaroOrg https://www.youtube.com/user/linaroorg?sub_confirmation=1 https://www.linkedin.com/company/1026961"

HKG18-113- Secure Data Path work with i.MX8M

"Session ID: HKG18-113 Session Name: HKG18-113 - Secure Data Path work with i.MX8M Speaker: Cyrille Fleury Track: Digital Home ★ Session Summary ★ NXP presentation on Secure Data Path work with i.MX8M Soc. Demonstrate 4K PlayReady playback with Android 8.1 running on i.MX8M. Focus on security (MS SL3000 and Widevine level 1) --------------------------------------------------- ★ Resources ★ Event Page: http://connect.linaro.org/resource/hkg18/hkg18-113/ Presentation: http://connect.linaro.org.s3.amazonaws.com/hkg18/presentations/hkg18-113.pdf Video: http://connect.linaro.org.s3.amazonaws.com/hkg18/videos/hkg18-113.mp4 --------------------------------------------------- ★ Event Details ★ Linaro Connect Hong Kong 2018 (HKG18) 19-23 March 2018 Regal Airport Hotel Hong Kong --------------------------------------------------- Keyword: Digital Home 'http://www.linaro.org' 'http://connect.linaro.org' --------------------------------------------------- Follow us on Social Media https://www.facebook.com/LinaroOrg https://www.youtube.com/user/linaroorg?sub_confirmation=1 https://www.linkedin.com/company/1026961"

HKG18-120 - Devicetree Schema Documentation and Validation

"Session ID: HKG18-120 Session Name: HKG18-120 - Structured Documentation and Validation for Device Tree Speaker: Grant Likely Track: Kernel ★ Session Summary ★ Devicetree has become the dominant hardware configuration language used when building embedded systems. Projects using Devicetree now include Linux, U-Boot, Android, FreeBSD, and Zephyr. However, it is notoriously difficult to write correct Devicetree data files. The dtc tools perform limited tests for valid data, and there there is not yet a way to add validity test for specific hardware descriptions. Neither is there a good way to document requirements for specific bindings. Work is underway to solve these problems. This session will present a proposal for adding Devicetree schema files to the Devicetree toolchain that can be used to both validate data and produce usable documentation. --------------------------------------------------- ★ Resources ★ Event Page: http://connect.linaro.org/resource/hkg18/hkg18-120/ Presentation: http://connect.linaro.org.s3.amazonaws.com/hkg18/presentations/hkg18-120.pdf Video: http://connect.linaro.org.s3.amazonaws.com/hkg18/videos/hkg18-120.mp4 --------------------------------------------------- ★ Event Details ★ Linaro Connect Hong Kong 2018 (HKG18) 19-23 March 2018 Regal Airport Hotel Hong Kong --------------------------------------------------- Keyword: Kernel 'http://www.linaro.org' 'http://connect.linaro.org' --------------------------------------------------- Follow us on Social Media https://www.facebook.com/LinaroOrg https://www.youtube.com/user/linaroorg?sub_confirmation=1 https://www.linkedin.com/company/1026961"

HKG18-223 - Trusted FirmwareM: Trusted boot