BIM vs Risk on Stanford Cath 9
•Download as PPT, PDF•
3 likes•556 views
The document discusses how Building Information Modeling (BIM) and other technologies can reduce waste and risks in construction projects. It describes how BIM allows for 3D modeling, simulation, clash detection and coordination which can reduce waste in design, fabrication, and construction. By enabling more coordination and collaboration early on through BIM, the risks for architects, contractors and owners are reduced. When risks are reduced for all parties, it leads to lower overall project costs.
Report
Share
Report
Share
![BIM & the Design of Cath Lab 9 ,[object Object],[object Object],[object Object],[object Object],[object Object],The Design Partnership LLP Architects + Planners](https://image.slidesharecdn.com/stanfordbimvsrisksmall-110407204653-phpapp02/85/BIM-vs-Risk-on-Stanford-Cath-9-1-320.jpg)
![About The Design Partnership LLP ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],The Design Partnership LLP Architects + Planners](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Leaning Project Delivery: Altering the Cost = Risk Equation
This document discusses how design and construction technologies can reduce risk and costs in construction projects. It presents how building information modeling (BIM), virtual simulation, 3D coordination, prefabrication, and integrated project delivery can improve efficiency by reducing errors, waste, and unknowns. While these techniques may increase the architect's exposure by taking on more coordination responsibilities, they can decrease overall project risk for owners and contractors, leading to reduced costs. The document argues that greater use of technology in design and construction allows all parties to share risk and realize the benefits of improved workflows and collaboration.
Cape Cod Networking-BIM_MDESK
This document provides information about a networking event hosted by Microdesk to discuss transitioning to building information modeling (BIM). The event featured a presentation by Clarke Morrison from Microdesk on keys to a successful BIM implementation. Morrison discussed benefits of BIM such as increased collaboration and efficiency. Morrison also demonstrated Insight 360, a cloud-based energy simulation tool, and rendering tools. Microdesk provides BIM consulting and training services to help architecture, engineering and construction firms adopt BIM.
ENR FutureTech Article - David Epps
1) While information mobility tools on construction sites have grown in popularity, the use of 3D and building information models (BIM) for collaboration on jobsites is still limited. Experts say that BIM mobility has potential benefits but widespread adoption depends on project complexity and contractor size.
2) Holder Construction uses 4D modeling software to create construction simulations that help project superintendents visualize and plan schedules. However, a survey found that most contractors do not extensively use mobile devices to access and author 3D models on sites due to data limitations and worker training.
3) As cloud computing advances and owners increasingly expect electronic project handovers, experts predict that BIM collaboration will continue growing. But proving clear returns
Autodesk University: Designing the Future
This document discusses the evolving architecture, engineering, and construction (AEC) industry. It notes new challenges like sustainability, constructability, and advanced digital tools. Technology is catalyzing changes like building information modeling (BIM) that allow for collaboration and integrated design workflows. BIM brings together design, analysis, and construction processes to deliver greater value. Autodesk offers products across the AEC disciplines to support the industry's shift to more integrated digital practices using BIM.
BUILDING INFORMATION MODELING PRESENTATION FInal
The document discusses building information modeling (BIM) and its benefits for the construction industry in India. It notes current inefficiencies and issues, and then summarizes presentations by Mr. Dinesh Patel, director of Patel Infrastructure, and Mr. Kaushik Gajjar, BIM manager at Hi-Tech Solutions, about BIM. BIM allows for increased coordination, faster construction, improved visualization, clash detection, reduced waste, and cost reductions. The document also outlines specific benefits of BIM for architects, engineers, contractors, and owners, as well as potential barriers to adoption.
BIM 360 Overview by Jessica Denman- august 2017
This is the 1st part of the BIM360 Webinar.
Stay up to date with everything new in BIM 360.
Join us monthly to hear from the BIM 360 product team about how you can take advantage of the most recent and upcoming product updates.
Learn how BIM 360 can help you improve project delivery.
Stay up to date with the newest features.
Get early insights into what’s coming in future updates.
Participate in Q&A with the BIM 360 product team.
Get the resources you need to be successful.
Why Design Automation Will Disrupt AEC
The architecture, engineering, and construction (AEC) industry will be disrupted by technology in a significant way. BuildingSP believes that design automation will be the disruptor based on the history of disruption, the first principles that design automation affects, and similarities to other design automation examples.
ClashMEP at AEC Hackathon - San Francisco, Jan 6-8, 2017
A variety of factors contribute to high costs in Building Information Modeling (BIM). "Hack My Clash" (HMC) lowers BIM costs through data, automation, management, and agile thinking. HMC takes a revolutionary new tool - ClashMEP, which adds clash detection in real-time to Revit - and links it to bug trackers from the software industry through an API. The secret sauce is the insight that clash detection in the model authoring tool allows for new capabilities, like automating the creation and resolution of clash issues. The upside is that HMC can be used on any project that uses BIM.
Recommended
Leaning Project Delivery: Altering the Cost = Risk Equation
This document discusses how design and construction technologies can reduce risk and costs in construction projects. It presents how building information modeling (BIM), virtual simulation, 3D coordination, prefabrication, and integrated project delivery can improve efficiency by reducing errors, waste, and unknowns. While these techniques may increase the architect's exposure by taking on more coordination responsibilities, they can decrease overall project risk for owners and contractors, leading to reduced costs. The document argues that greater use of technology in design and construction allows all parties to share risk and realize the benefits of improved workflows and collaboration.
Cape Cod Networking-BIM_MDESK
This document provides information about a networking event hosted by Microdesk to discuss transitioning to building information modeling (BIM). The event featured a presentation by Clarke Morrison from Microdesk on keys to a successful BIM implementation. Morrison discussed benefits of BIM such as increased collaboration and efficiency. Morrison also demonstrated Insight 360, a cloud-based energy simulation tool, and rendering tools. Microdesk provides BIM consulting and training services to help architecture, engineering and construction firms adopt BIM.
ENR FutureTech Article - David Epps
1) While information mobility tools on construction sites have grown in popularity, the use of 3D and building information models (BIM) for collaboration on jobsites is still limited. Experts say that BIM mobility has potential benefits but widespread adoption depends on project complexity and contractor size.
2) Holder Construction uses 4D modeling software to create construction simulations that help project superintendents visualize and plan schedules. However, a survey found that most contractors do not extensively use mobile devices to access and author 3D models on sites due to data limitations and worker training.
3) As cloud computing advances and owners increasingly expect electronic project handovers, experts predict that BIM collaboration will continue growing. But proving clear returns
Autodesk University: Designing the Future
This document discusses the evolving architecture, engineering, and construction (AEC) industry. It notes new challenges like sustainability, constructability, and advanced digital tools. Technology is catalyzing changes like building information modeling (BIM) that allow for collaboration and integrated design workflows. BIM brings together design, analysis, and construction processes to deliver greater value. Autodesk offers products across the AEC disciplines to support the industry's shift to more integrated digital practices using BIM.
BUILDING INFORMATION MODELING PRESENTATION FInal
The document discusses building information modeling (BIM) and its benefits for the construction industry in India. It notes current inefficiencies and issues, and then summarizes presentations by Mr. Dinesh Patel, director of Patel Infrastructure, and Mr. Kaushik Gajjar, BIM manager at Hi-Tech Solutions, about BIM. BIM allows for increased coordination, faster construction, improved visualization, clash detection, reduced waste, and cost reductions. The document also outlines specific benefits of BIM for architects, engineers, contractors, and owners, as well as potential barriers to adoption.
BIM 360 Overview by Jessica Denman- august 2017
This is the 1st part of the BIM360 Webinar.
Stay up to date with everything new in BIM 360.
Join us monthly to hear from the BIM 360 product team about how you can take advantage of the most recent and upcoming product updates.
Learn how BIM 360 can help you improve project delivery.
Stay up to date with the newest features.
Get early insights into what’s coming in future updates.
Participate in Q&A with the BIM 360 product team.
Get the resources you need to be successful.
Why Design Automation Will Disrupt AEC
The architecture, engineering, and construction (AEC) industry will be disrupted by technology in a significant way. BuildingSP believes that design automation will be the disruptor based on the history of disruption, the first principles that design automation affects, and similarities to other design automation examples.
ClashMEP at AEC Hackathon - San Francisco, Jan 6-8, 2017
A variety of factors contribute to high costs in Building Information Modeling (BIM). "Hack My Clash" (HMC) lowers BIM costs through data, automation, management, and agile thinking. HMC takes a revolutionary new tool - ClashMEP, which adds clash detection in real-time to Revit - and links it to bug trackers from the software industry through an API. The secret sauce is the insight that clash detection in the model authoring tool allows for new capabilities, like automating the creation and resolution of clash issues. The upside is that HMC can be used on any project that uses BIM.
BIM Process & BIM Pilot Project
This document discusses building information modeling (BIM) and its value. It begins by introducing BIM, describing the BIM process and workflow. It then discusses measuring the value of BIM implementation through return on investment. The document outlines the value of BIM at different levels from industry to projects. Finally, it discusses moving organizations to higher stages of BIM adoption through pilot projects and process changes.
Architectural engineering services -
Architectural engineering also known as building engineering, is the application of engineering principles and technology to building design and construction. Architectural drafting and designing services are considered as one of the most important sections of architectural engineering.
#AU2016 Unlock the "I" in BIM with Data Democratization
In order to achieve a positive return on investment (ROI) in Building Information Modeling (BIM), data should transfer freely and reliably between relevant project stakeholders. Cloud collaboration tools seek to address the AEC industry’s past challenges with effective BIM collaboration. This presentation describes how the democratization of data allows project teams to disrupt traditional practices and and create exponential value to the design and construction process.
PMIGLC CQM Discussion Panel on BIM4CQM-Laura Suter
The document discusses the use of Building Information Modeling (BIM) for quality assurance and quality control (QAQC). It provides an overview of BIM, highlighting its benefits for preconstruction, construction, inspections, as-builts, auditing, and reducing rework. While there are some potential barriers to adopting BIM like costs and expertise, the document argues that organizations cannot afford not to use BIM given industry data showing 2-6% of contract costs are spent on rework alone. BIM helps bring design visions to reality by improving coordination, clash detection, and communication of expectations.
The future of AEC industry depends on BIM!
As BIM is growing at a constant pace it is mandatory for design and construction professionals to implement this technology in every possible project as it will only have positive effects on its execution. BIM Services India is an India based BIM modeling services provider delivering all types of CAD and BIM services at low cost to clients across the world. For more information, email us at projects@bimservicesindia.com.
A New Development Platform Connecting BIM to Anything - Mr. Xiaodong LIANG Ch...
A New Development Platform Connecting BIM to Anything - Mr. Xiaodong LIANG Ch...The Hong Kong Institute of Building Information Modelling (HKIBIM)
A New Development Platform Connecting BIM to Anything
Mr. Xiaodong LIANG China Manager, Developer Technical Service Department (DevTech) Autodesk Inc
HKIBIM Annual Conference 2017
Theme: Transforming BIM to Action
Date: 22-Nov-2017 (Wed)
Time: 9:00 a.m. – 4:30 p.m.
Venue: Grand Ballroom I-III, Level 6, Royal Plaza Hotel, Hong Kong
Organizers:
The Hong Kong Institute of Building Information Modelling (HKIBIM)
http://www.hkibim.org
HKIBIM Annual Conference 2017 is the 8th Annual Conference organized by the Hong Kong Institute of Building Information Modelling (HKIBIM). It is the premier annual event for experienced professionals to demonstrate the practical use of Building Information Modelling (BIM) processes using real cases. The speakers are encouraged to illustrate lessons learned in practical projects so that more professionals from different disciplines can improve their productivity through efficient use of BIM and advance practical knowledge. This is an exciting opportunity to share your knowledge and experience with the larger BIM community.Integrating Advanced Analytics with Autodesk Solutions
Learn how to integrate analytics software with Autodesk products to improve project visibility and communicate progress, issues and accomplishments to project stakeholders.
This class highlights proven approaches to design and integrate analytics into a project and demonstrates how stakeholders have the ability to view charts and trends including the ability to drill down into project data to identify challenge areas and apply corrective actions to improve the likelihood of a successful project outcome.
How to Create a Rock Star BIM Execution Plan (BEP) and MPDT* (Responsibility ...
A BIM Execution Plan (BEP) is a valuable and necessary part of any project in the AEC sector. It is essential when the team needs to work in a collaborative process to ensure that everyone on the project is aligned with the project objectives. A correctly implemented BEP will ensure the project goals are clear and agreed by the wide project team. Communication is a key component of all construction projects. To be successful, it requires many different people working together to achieve the client requirements. A well-built BEP requires the project team to work together and communicate from the very beginning to the completion of the project. This class will explain the importance of the BEP and demonstrate how to create an efficient BEP for post-contract-award which will include the Model Production & Delivery Table (MPDT). The post-contract-award BEP sets out how the information required in the Employer's Information Requirements will be provided.
Build Source-Company_Profile
Build Source utilizes experience and technology to remain current in the world of Building Information Modeling, applying its expertise across the entire spectrum of Architecture, Engineering and Construction. While BIM remains the core competency, the company does not limit itself to the basic tasks of Modeling and instead works in close collaboration with Consultants and Contractors, ensuring coordinated services that add tangible value to End Users.
PMIGLC CQM Discussion Panel on BIM4CQM-Haitham Sarsam
This document discusses how building information modeling (BIM) can improve quality management on construction projects. It defines quality control as ensuring compliance with design standards to ensure the facility performs as intended. BIM allows for virtual construction to identify issues, facilitates collaboration and coordination, and creates more accurate drawings and estimates to reduce changes and rework. This leads to fewer defects, lower costs and schedule delays, and improved productivity and customer satisfaction through better quality control.
On IP
The document discusses Integrated Project Delivery (IPD), a collaborative project delivery method. It provides an overview of the theory, challenges, and tools of IPD. Key aspects of IPD include a multi-party agreement, shared risks and rewards based on project outcomes, early involvement of all parties, and a shared single source fund to maximize value for the owner. The document also outlines characteristics to look for to recognize if a project is using true IPD principles and factors for an owner to consider regarding if IPD is a good fit for their project needs.
The ROI of BIM 360 Design - Customers Share Their Stories
In this collection of quotes on Autodesk BIM 360 Design, customers share how the product has helped them save time, money, and helped reduce or eliminate coordination challenges.
Acciona: Binding solution risk assesment
This document discusses the development of a binding solution to stabilize and consolidate ballast on high speed railways. The binding solution aims to reduce the phenomenon of ballast projection, prevent damage to rail platforms, require low maintenance, and reduce noise and vibration. Partners for the project can include countries in the Eureka network and companies or SMEs with expertise in railway construction or systems.
Participatory Multi-Hazard Disaster Risk Reduction Project in Armenia
This document summarizes a participatory multi-hazard disaster risk reduction project funded by DIPECHO and Oxfam GB that took place from 2010-2011 in 10 communities in Armenia's Vayots Dzor region. The project established Community Emergency Groups composed of volunteers from each community who were trained in disaster risk reduction and first aid provision. Hazard maps and emergency plans were developed for each community. Small-scale mitigation projects like bridge and canal repairs were conducted. Teachers and school children were also trained to increase disaster preparedness. Simulation drills helped evaluate the program's effectiveness in preparing communities to manage hazards and respond to disasters.
Rework Reduction in Construction Project
The document discusses rework reduction through the use of a Construction Lean Improvement Program (CLIP) on a case study of the New Australian Embassy in Jakarta construction project. It finds that implementing CLIP, including strategies like 5S, first inspector systems, and performance monitoring, led to a 57% reduction in non-conformance reports, saving $20,000. CLIP aims to eliminate waste and smooth workflow through lean thinking principles. The case study suggests expanding CLIP to other construction areas in the project to further reduce rework through continual training and quality monitoring processes.
Disaster Risk Reduction (DRR) Project Portal - User Guide
Disaster Risk Reduction (DRR) Project Portal - User GuideDisaster Risk Reduction (DRR) Project Portal
The document provides an overview of the Disaster Risk Reduction (DRR) Project Portal, an online system for collecting information on DRR projects and programs in Asia Pacific. The portal allows governments, organizations, and donors to plan better by knowing what others are doing, identify gaps and priorities, and find potential partners or funding. Users can add project details, search for and analyze existing projects, and view regional organizations involved in DRR work.Risk assesment template
The role of Risk Assessment and Risk Management is to continuously Identify, Analyze, Plan, Track, Control, and Communicate the risks associated with a project.
The Webster’s definition of risk is the possibility of suffering a loss. Risk in itself is not bad. Risk is essential to progress and failure is often a key part of learning. Managing risk is a key part of success.
This document describes the foundations for conducting a risk assessment of a large-scale system development project. Such a project will likely include the procurement of Commercial Off The Shelf (COTS) products as well as their integration with legacy systems.
EFFECTS OF RISK MANAGEMENT METHODS ON PROJECT PERFORMANCE IN RWANDAN CONSTRUC...
EFFECTS OF RISK MANAGEMENT METHODS ON PROJECT PERFORMANCE IN RWANDAN CONSTRUC...Sibo Kanyambari Aimable
Risks are very common in construction sector. Risk is the Possibility of suffering loss and the impact on the involved parties. According to APM (2006), all projects are inherently risky because they are unique, constrained, complex, based on assumptions, and performed by people. As a result, project risk management methods must be built into the management of projects and should be used throughout the project lifecycle.
Many construction projects fail because organizations assume that all the projects would succeed and they therefore do not identify, analyze, and provide mitigation or contingencies for the risk elements involved in the project.
Society desires that all projects should be performing and has become less tolerant of failure (Edwards and Bowen, 2005). Pressure is exerted on project managers to minimize the chance of project failure. This increasing pressure for performance which suggests that it is prudent for anyone involved in a project to be concerned about the associated risks and how they can be effectively managed.
Traditionally, performance of a project is analyzed on the criteria of quality, budget and time of completion. Two more criteria to determine the performance of a project were added by Kerzner (2001). Firstly, the project would effectively and efficiently manage risks and, secondly, it should be accepted by the customer.
It is known that the cause of the projects failure can be directly related to the extent of risk management methods undertaken. Besides, the level of risk management methods undertaken during project lifecycle impacts directly on the performance or otherwise of the project. Furthermore, using risk management methods effectively to manage risk should be continuously undertaken throughout the project lifecycle to enhance project performance. Risk management methods are thus an important tool to cope with such substantial risks in projects performance.
The main objective of the enquiry work that underpins this research is to investigate the effect of risk management methods on project performance. In this paper, a case study of RSSB multi-storey already executed project is considered.
Project risk management focus on risk identification techniques
The risk identification is the first operating process in the Project Risk Management and it expects the active involvement of the project Stakeholders, through the use of specific tools and techniques.
It's the process in which creativity, iterativity and a joint use of the tools and techniques are strategic in order to perform an effective and efficient Project Risk Management.
The risk identification techniques are presented in the slides conforming to the PMBOK Guide ©, fifth edition
A study of various factors affecting risk management techniques in constructi...
Abstract
Risk management is an important step which should not be neglect or ignore in every project. Because of various risk involved in construction, it is difficult to maintain time, cost and quality as planned. Project undertaken in the construction sector are widely complex and have often significant budgets, and thus reducing the risk associated should be a priority for each project manager. The main purpose of this paper is to identify the key risk factors that affect construction project. Questionnaires has been prepared incorporating of 50 difference questions after which questionnaire survey was conducted where the questions has been focused based on (component of questionnaire) the respondents were selected based on their susceptibility to the risk. The data was analyzed using the Statistical package for social sciences (SPSS) version 21. The result shows that the inadequate planning in construction project, poor adoption of site safety, supply and use of defective materials and poor resources management in construction project are all among the forefront key risk factors which affect construction project, meanwhile, effective recommendations have been developed to increases the efficiency, speedy and minimises risk and abortive work in construction project.
Keywords: Construction Industries, Construction Projects, Risks Management, Techniques
Exploration of risks and risk management in construction project delivery
Risks are pervasive throughout construction projects and need to be properly managed. This document discusses:
1) Various types of risks that occur during different phases of the project life cycle from planning to construction.
2) How the selection of a project delivery system, such as design-bid-build or design-build, can impact risks related to costs, schedule and control.
3) Qualitative and quantitative risk analysis methods that can be used to identify, prioritize and evaluate risks, such as cause-and-effect diagrams and decision analysis.
Construction project risk management
A survey was conducted on construction project risk management. The results showed that respondents felt the most important things were risk identification and mitigation, analyzing competitors' risks, and ensuring risks are distributed fairly between contracting parties. The Construction Project Risk Management Asia 2011 conference will provide answers to questions on managing risks, with case studies from major infrastructure projects. Attendees can register by email or phone.
More Related Content
What's hot
BIM Process & BIM Pilot Project
This document discusses building information modeling (BIM) and its value. It begins by introducing BIM, describing the BIM process and workflow. It then discusses measuring the value of BIM implementation through return on investment. The document outlines the value of BIM at different levels from industry to projects. Finally, it discusses moving organizations to higher stages of BIM adoption through pilot projects and process changes.
Architectural engineering services -
Architectural engineering also known as building engineering, is the application of engineering principles and technology to building design and construction. Architectural drafting and designing services are considered as one of the most important sections of architectural engineering.
#AU2016 Unlock the "I" in BIM with Data Democratization
In order to achieve a positive return on investment (ROI) in Building Information Modeling (BIM), data should transfer freely and reliably between relevant project stakeholders. Cloud collaboration tools seek to address the AEC industry’s past challenges with effective BIM collaboration. This presentation describes how the democratization of data allows project teams to disrupt traditional practices and and create exponential value to the design and construction process.
PMIGLC CQM Discussion Panel on BIM4CQM-Laura Suter
The document discusses the use of Building Information Modeling (BIM) for quality assurance and quality control (QAQC). It provides an overview of BIM, highlighting its benefits for preconstruction, construction, inspections, as-builts, auditing, and reducing rework. While there are some potential barriers to adopting BIM like costs and expertise, the document argues that organizations cannot afford not to use BIM given industry data showing 2-6% of contract costs are spent on rework alone. BIM helps bring design visions to reality by improving coordination, clash detection, and communication of expectations.
The future of AEC industry depends on BIM!
As BIM is growing at a constant pace it is mandatory for design and construction professionals to implement this technology in every possible project as it will only have positive effects on its execution. BIM Services India is an India based BIM modeling services provider delivering all types of CAD and BIM services at low cost to clients across the world. For more information, email us at projects@bimservicesindia.com.
A New Development Platform Connecting BIM to Anything - Mr. Xiaodong LIANG Ch...
A New Development Platform Connecting BIM to Anything - Mr. Xiaodong LIANG Ch...The Hong Kong Institute of Building Information Modelling (HKIBIM)
A New Development Platform Connecting BIM to Anything
Mr. Xiaodong LIANG China Manager, Developer Technical Service Department (DevTech) Autodesk Inc
HKIBIM Annual Conference 2017
Theme: Transforming BIM to Action
Date: 22-Nov-2017 (Wed)
Time: 9:00 a.m. – 4:30 p.m.
Venue: Grand Ballroom I-III, Level 6, Royal Plaza Hotel, Hong Kong
Organizers:
The Hong Kong Institute of Building Information Modelling (HKIBIM)
http://www.hkibim.org
HKIBIM Annual Conference 2017 is the 8th Annual Conference organized by the Hong Kong Institute of Building Information Modelling (HKIBIM). It is the premier annual event for experienced professionals to demonstrate the practical use of Building Information Modelling (BIM) processes using real cases. The speakers are encouraged to illustrate lessons learned in practical projects so that more professionals from different disciplines can improve their productivity through efficient use of BIM and advance practical knowledge. This is an exciting opportunity to share your knowledge and experience with the larger BIM community.Integrating Advanced Analytics with Autodesk Solutions
Learn how to integrate analytics software with Autodesk products to improve project visibility and communicate progress, issues and accomplishments to project stakeholders.
This class highlights proven approaches to design and integrate analytics into a project and demonstrates how stakeholders have the ability to view charts and trends including the ability to drill down into project data to identify challenge areas and apply corrective actions to improve the likelihood of a successful project outcome.
How to Create a Rock Star BIM Execution Plan (BEP) and MPDT* (Responsibility ...
A BIM Execution Plan (BEP) is a valuable and necessary part of any project in the AEC sector. It is essential when the team needs to work in a collaborative process to ensure that everyone on the project is aligned with the project objectives. A correctly implemented BEP will ensure the project goals are clear and agreed by the wide project team. Communication is a key component of all construction projects. To be successful, it requires many different people working together to achieve the client requirements. A well-built BEP requires the project team to work together and communicate from the very beginning to the completion of the project. This class will explain the importance of the BEP and demonstrate how to create an efficient BEP for post-contract-award which will include the Model Production & Delivery Table (MPDT). The post-contract-award BEP sets out how the information required in the Employer's Information Requirements will be provided.
Build Source-Company_Profile
Build Source utilizes experience and technology to remain current in the world of Building Information Modeling, applying its expertise across the entire spectrum of Architecture, Engineering and Construction. While BIM remains the core competency, the company does not limit itself to the basic tasks of Modeling and instead works in close collaboration with Consultants and Contractors, ensuring coordinated services that add tangible value to End Users.
PMIGLC CQM Discussion Panel on BIM4CQM-Haitham Sarsam
This document discusses how building information modeling (BIM) can improve quality management on construction projects. It defines quality control as ensuring compliance with design standards to ensure the facility performs as intended. BIM allows for virtual construction to identify issues, facilitates collaboration and coordination, and creates more accurate drawings and estimates to reduce changes and rework. This leads to fewer defects, lower costs and schedule delays, and improved productivity and customer satisfaction through better quality control.
On IP
The document discusses Integrated Project Delivery (IPD), a collaborative project delivery method. It provides an overview of the theory, challenges, and tools of IPD. Key aspects of IPD include a multi-party agreement, shared risks and rewards based on project outcomes, early involvement of all parties, and a shared single source fund to maximize value for the owner. The document also outlines characteristics to look for to recognize if a project is using true IPD principles and factors for an owner to consider regarding if IPD is a good fit for their project needs.
The ROI of BIM 360 Design - Customers Share Their Stories
In this collection of quotes on Autodesk BIM 360 Design, customers share how the product has helped them save time, money, and helped reduce or eliminate coordination challenges.
What's hot (12)
#AU2016 Unlock the "I" in BIM with Data Democratization
#AU2016 Unlock the "I" in BIM with Data Democratization
PMIGLC CQM Discussion Panel on BIM4CQM-Laura Suter
PMIGLC CQM Discussion Panel on BIM4CQM-Laura Suter
A New Development Platform Connecting BIM to Anything - Mr. Xiaodong LIANG Ch...
A New Development Platform Connecting BIM to Anything - Mr. Xiaodong LIANG Ch...
Integrating Advanced Analytics with Autodesk Solutions
Integrating Advanced Analytics with Autodesk Solutions
How to Create a Rock Star BIM Execution Plan (BEP) and MPDT* (Responsibility ...
How to Create a Rock Star BIM Execution Plan (BEP) and MPDT* (Responsibility ...
PMIGLC CQM Discussion Panel on BIM4CQM-Haitham Sarsam
PMIGLC CQM Discussion Panel on BIM4CQM-Haitham Sarsam
The ROI of BIM 360 Design - Customers Share Their Stories
The ROI of BIM 360 Design - Customers Share Their Stories
Viewers also liked
Acciona: Binding solution risk assesment
This document discusses the development of a binding solution to stabilize and consolidate ballast on high speed railways. The binding solution aims to reduce the phenomenon of ballast projection, prevent damage to rail platforms, require low maintenance, and reduce noise and vibration. Partners for the project can include countries in the Eureka network and companies or SMEs with expertise in railway construction or systems.
Participatory Multi-Hazard Disaster Risk Reduction Project in Armenia
This document summarizes a participatory multi-hazard disaster risk reduction project funded by DIPECHO and Oxfam GB that took place from 2010-2011 in 10 communities in Armenia's Vayots Dzor region. The project established Community Emergency Groups composed of volunteers from each community who were trained in disaster risk reduction and first aid provision. Hazard maps and emergency plans were developed for each community. Small-scale mitigation projects like bridge and canal repairs were conducted. Teachers and school children were also trained to increase disaster preparedness. Simulation drills helped evaluate the program's effectiveness in preparing communities to manage hazards and respond to disasters.
Rework Reduction in Construction Project
The document discusses rework reduction through the use of a Construction Lean Improvement Program (CLIP) on a case study of the New Australian Embassy in Jakarta construction project. It finds that implementing CLIP, including strategies like 5S, first inspector systems, and performance monitoring, led to a 57% reduction in non-conformance reports, saving $20,000. CLIP aims to eliminate waste and smooth workflow through lean thinking principles. The case study suggests expanding CLIP to other construction areas in the project to further reduce rework through continual training and quality monitoring processes.
Disaster Risk Reduction (DRR) Project Portal - User Guide
Disaster Risk Reduction (DRR) Project Portal - User GuideDisaster Risk Reduction (DRR) Project Portal
The document provides an overview of the Disaster Risk Reduction (DRR) Project Portal, an online system for collecting information on DRR projects and programs in Asia Pacific. The portal allows governments, organizations, and donors to plan better by knowing what others are doing, identify gaps and priorities, and find potential partners or funding. Users can add project details, search for and analyze existing projects, and view regional organizations involved in DRR work.Risk assesment template
The role of Risk Assessment and Risk Management is to continuously Identify, Analyze, Plan, Track, Control, and Communicate the risks associated with a project.
The Webster’s definition of risk is the possibility of suffering a loss. Risk in itself is not bad. Risk is essential to progress and failure is often a key part of learning. Managing risk is a key part of success.
This document describes the foundations for conducting a risk assessment of a large-scale system development project. Such a project will likely include the procurement of Commercial Off The Shelf (COTS) products as well as their integration with legacy systems.
EFFECTS OF RISK MANAGEMENT METHODS ON PROJECT PERFORMANCE IN RWANDAN CONSTRUC...
EFFECTS OF RISK MANAGEMENT METHODS ON PROJECT PERFORMANCE IN RWANDAN CONSTRUC...Sibo Kanyambari Aimable
Risks are very common in construction sector. Risk is the Possibility of suffering loss and the impact on the involved parties. According to APM (2006), all projects are inherently risky because they are unique, constrained, complex, based on assumptions, and performed by people. As a result, project risk management methods must be built into the management of projects and should be used throughout the project lifecycle.
Many construction projects fail because organizations assume that all the projects would succeed and they therefore do not identify, analyze, and provide mitigation or contingencies for the risk elements involved in the project.
Society desires that all projects should be performing and has become less tolerant of failure (Edwards and Bowen, 2005). Pressure is exerted on project managers to minimize the chance of project failure. This increasing pressure for performance which suggests that it is prudent for anyone involved in a project to be concerned about the associated risks and how they can be effectively managed.
Traditionally, performance of a project is analyzed on the criteria of quality, budget and time of completion. Two more criteria to determine the performance of a project were added by Kerzner (2001). Firstly, the project would effectively and efficiently manage risks and, secondly, it should be accepted by the customer.
It is known that the cause of the projects failure can be directly related to the extent of risk management methods undertaken. Besides, the level of risk management methods undertaken during project lifecycle impacts directly on the performance or otherwise of the project. Furthermore, using risk management methods effectively to manage risk should be continuously undertaken throughout the project lifecycle to enhance project performance. Risk management methods are thus an important tool to cope with such substantial risks in projects performance.
The main objective of the enquiry work that underpins this research is to investigate the effect of risk management methods on project performance. In this paper, a case study of RSSB multi-storey already executed project is considered.
Project risk management focus on risk identification techniques
The risk identification is the first operating process in the Project Risk Management and it expects the active involvement of the project Stakeholders, through the use of specific tools and techniques.
It's the process in which creativity, iterativity and a joint use of the tools and techniques are strategic in order to perform an effective and efficient Project Risk Management.
The risk identification techniques are presented in the slides conforming to the PMBOK Guide ©, fifth edition
A study of various factors affecting risk management techniques in constructi...
Abstract
Risk management is an important step which should not be neglect or ignore in every project. Because of various risk involved in construction, it is difficult to maintain time, cost and quality as planned. Project undertaken in the construction sector are widely complex and have often significant budgets, and thus reducing the risk associated should be a priority for each project manager. The main purpose of this paper is to identify the key risk factors that affect construction project. Questionnaires has been prepared incorporating of 50 difference questions after which questionnaire survey was conducted where the questions has been focused based on (component of questionnaire) the respondents were selected based on their susceptibility to the risk. The data was analyzed using the Statistical package for social sciences (SPSS) version 21. The result shows that the inadequate planning in construction project, poor adoption of site safety, supply and use of defective materials and poor resources management in construction project are all among the forefront key risk factors which affect construction project, meanwhile, effective recommendations have been developed to increases the efficiency, speedy and minimises risk and abortive work in construction project.
Keywords: Construction Industries, Construction Projects, Risks Management, Techniques
Exploration of risks and risk management in construction project delivery
Risks are pervasive throughout construction projects and need to be properly managed. This document discusses:
1) Various types of risks that occur during different phases of the project life cycle from planning to construction.
2) How the selection of a project delivery system, such as design-bid-build or design-build, can impact risks related to costs, schedule and control.
3) Qualitative and quantitative risk analysis methods that can be used to identify, prioritize and evaluate risks, such as cause-and-effect diagrams and decision analysis.
Construction project risk management
A survey was conducted on construction project risk management. The results showed that respondents felt the most important things were risk identification and mitigation, analyzing competitors' risks, and ensuring risks are distributed fairly between contracting parties. The Construction Project Risk Management Asia 2011 conference will provide answers to questions on managing risks, with case studies from major infrastructure projects. Attendees can register by email or phone.
Basic Risk Identification Techniques
This document discusses techniques for basic risk identification:
1) Interviewing subject matter experts allows risks to be identified that may not be known to the project team. Brainstorming encourages identifying many risks but must be facilitated properly. The Delphi technique uses anonymous interviews to get expert opinions.
2) Nominal group technique combines individual and group work in a structured process. Crawford slips have individuals privately write risks for fast identification. Analogy identifies risks based on similarities to past projects.
3) Checklists and templates systematize the identification of risks based on historical data from other organizations.
Risk assesment
Risk assesment
Dr. I.M. Mishra
Professor, Dept. of Chemical Engineering
Dean, Saharanpur Campus
Indian Institute of Technology, Roorkee
Viewers also liked (12)
Participatory Multi-Hazard Disaster Risk Reduction Project in Armenia
Participatory Multi-Hazard Disaster Risk Reduction Project in Armenia
Disaster Risk Reduction (DRR) Project Portal - User Guide
Disaster Risk Reduction (DRR) Project Portal - User Guide
EFFECTS OF RISK MANAGEMENT METHODS ON PROJECT PERFORMANCE IN RWANDAN CONSTRUC...
EFFECTS OF RISK MANAGEMENT METHODS ON PROJECT PERFORMANCE IN RWANDAN CONSTRUC...
Project risk management focus on risk identification techniques
Project risk management focus on risk identification techniques
A study of various factors affecting risk management techniques in constructi...
A study of various factors affecting risk management techniques in constructi...
Exploration of risks and risk management in construction project delivery
Exploration of risks and risk management in construction project delivery
Similar to BIM vs Risk on Stanford Cath 9
Reducing Risk with BIM
Presentation to UC Davis about BIM implementation on all projects large and small to reduce the risk of construction.
IFMA Presentation: BIM Making the Facility Manager's Life Easier
The document discusses how building information modeling (BIM) can reduce risks and costs for facility managers on projects. It presents results from three identical cath lab projects that used different levels of BIM: one with CAD only had the highest costs and longest schedule, while one with full BIM integration had the lowest costs, shortest schedule, and virtually no change orders. The document recommends facility managers use the existing BIM model from construction with free software for navigation and linking systems information with QR codes to help operations and maintenance.
Cc 2009 091202
This document discusses the challenges facing the architecture, engineering and construction (AEC) industry and how building information modeling (BIM) can help address them. It defines BIM and explains how it changes the nature of practice by integrating the design process. BIM allows for better visualization, coordination, analysis and supply chain integration. Firms can take a horizontal, vertical or progressive approach to adopting BIM. BIM improves productivity and accuracy by focusing on the building model rather than traditional drawings.
High-tech Healthcare Symposium: BIM for High-tech Healthcare
Presentation delivered to the High-tech Healthcare Symposium in SF on October 21, 2008. Topics include: intro to BIM & 3D technology, relationship to current construction technology, BIM & sustainability, how BIM alters the \"risk = cost\" equation.
Bim
The document discusses Building Information Management (BIM) and provides information on:
- Omar Selim who is a BIM expert with 14 years of experience.
- Problems in the construction industry such as poor coordination, change orders, delays and cost overruns.
- Benefits of BIM such as better coordination, clash detection, cost estimation and safety planning.
- Key aspects of BIM including 3D, 4D, 5D, 6D and 7D models which incorporate time, cost, sustainability and facilities management information.
Bim
The document discusses Building Information Management (BIM) and provides information on:
- Omar Selim who is a BIM expert with 14 years of experience.
- Problems in the construction industry such as poor coordination, change orders, delays and cost overruns that BIM can help address.
- BIM being a digital representation of the building process that involves 3D models as well as scheduling, cost estimation and sustainability information.
Bim Enabled Ipd
This document discusses the use of building information modeling (BIM) and integrated project delivery (IPD) on construction projects. It outlines a three step process of using BIM, virtual design and construction, and IPD. The focus is on collaboratively using a shared BIM model in Revit to facilitate design, documentation, coordination, cost estimating, fabrication and construction. Challenges that can be barriers to IPD are also discussed, such as lawyers leading instead of collaborating and failures to effectively engage stakeholders or handle information handoffs.
Tekla BIM Basics
The document discusses Tekla Structures software for building information modeling (BIM). It provides specialized BIM solutions for structural engineering, construction management, steel fabrication, precast fabrication, and rebar detailing. The software allows users to create constructible 3D models, collaborate in a shared model, and generate information for tasks from conceptual design through fabrication and construction.
Using an openBim Workflow
The document discusses openBIM, which uses open standards like Industry Foundation Classes (IFC) to enable real interoperability between different software applications. OpenBIM allows participants in a building project to use their preferred tools to access and share relevant BIM data. It also facilitates practical collaboration where models, designs, and analyses can progress in parallel. The document then provides an example case study of how an openBIM workflow was implemented for a commercial office building project.
Traditional IPD Transition
PDA Presentation of Company\\’s Mission Statement and Business Services contrasting Traditional & Integrated Project delivery services
Building Information Modeling (BIM) in Industrial Projects
Our architects and engineers work in tandem with the internal consultants of other disciplines to provide an optimised design for industrial projects. Visit https://besten.in to know more.
5 reasons why bim adoption is important for architects
Here are 5 pressing reasons why BIM adoption is important for Architects. Read on to know the exciting benefits that BIM brings for Architects. https://rdttech.co/5-reasons-why-bim-adoption-is-important-for-architects/
Whats the BIM IdeaWhy does this happenProjec.docx
Whats the BIM Idea?
Why does this happen?
Project Delivery Methods
▪ Traditional
Owner
Contractor
Architect &
Engineer
Sub. Sub. Sub. Sub.Sub.
Design-Bid-Build
Current Models
Planning Design Bid Construction Occupancy
Design-Bid-Build
(Linear Process)
CM at Risk; Design-Build
(Collaborative Process)
Planning
Design
Construction
Occupancy
Current Construction Model
Concept & Design
Civil
Struc.
Mech.
Elec.Plumb.
Fire
Prot.
Arch.
Construction &
Operation
2-D Drawings & Specifications
Coordination / Quality
RFI
RFI
RFI
RFI
RFI
RFI
Uncoordinated Drawings = Multiple RFI’s
Why does this happen?
How the subcontractor
installed it
How the project was
Documented
How the owner
was billed
When it was delivered What the owner really wanted
How the owner
requested it
How the project manager
understood it
How the architect
designed it
What the contractor bid How the marketing team
described it
Current AEC Process
New Model
Planning Design Bid Construction Occupancy
Design-Bid-Build
(Linear Process)
CM at Risk; Design-Build
(Collaborative Process)
Planning
Design
Construction
Occupancy
Planning
Design
Construction
Occupancy
CM at Risk; Design-Build
+ VDC/BIM
Technology-Enabled
Collaborative Process
( )
What Is BIM?
What is BIM?
Building
Information
Modeling
(BIM) Virtual Time Machine
Integrated Project Data
Data Sharing
Enhanced Visualization
Coordination
Collision Detection
Linked Parametric
Information
Process Collaboration
Interoperability
Digital
Intelligent
Object-Oriented
Data-Rich
... all based around the concept that BIM is a process of using technology
-- not just technology itself
There are so many definitions!
Building Information Modeling
▪ Software simulation of design, construction, and facility operation
▪ Virtual Construction - Building it twice – Once in the computer - Once in the field.
▪ Data-Rich Computer Model - Not just an electronic drawing tool.
▪ Object-Based (not just lines) Relational Database
▪ Intelligent ‘Drawings’: Data→ Physical and Functional Characteristics.
BIM =
BIM: Virtual Representations
▪ A BIM is a virtual representation of the physical and functional
characteristics of a facility, for good or bad.
BIM: Virtual Representations
Construction Model with BIM
Relational
Database
Civil Struc.
Elec.
Construction &
Operation
Design, Documents, & Data (3-D, 4-D, 5-D)
Arch.
Facility
Mgmt.
Fire
Prot.
Cost
Data
Mech.
Plumb.
Concept & Design
Why does this happen?
How the subcontractor
installed it
How the project was
Documented
How the owner
was billed
When it was delivered What the owner really wanted
How the owner
requested it
How the design team modeled
it
What the owner visualized and
approved.
What the contractor bid How the marketing team
described it
AEC Process With BIM
Influence vs Cost Curve
E
ff
o
rt Typical
‘Value’ Engineeri.
Whats the BIM IdeaWhy does this happenProjec.docx
Whats the BIM Idea?
Why does this happen?
Project Delivery Methods
▪ Traditional
Owner
Contractor
Architect &
Engineer
Sub. Sub. Sub. Sub.Sub.
Design-Bid-Build
Current Models
Planning Design Bid Construction Occupancy
Design-Bid-Build
(Linear Process)
CM at Risk; Design-Build
(Collaborative Process)
Planning
Design
Construction
Occupancy
Current Construction Model
Concept & Design
Civil
Struc.
Mech.
Elec.Plumb.
Fire
Prot.
Arch.
Construction &
Operation
2-D Drawings & Specifications
Coordination / Quality
RFI
RFI
RFI
RFI
RFI
RFI
Uncoordinated Drawings = Multiple RFI’s
Why does this happen?
How the subcontractor
installed it
How the project was
Documented
How the owner
was billed
When it was delivered What the owner really wanted
How the owner
requested it
How the project manager
understood it
How the architect
designed it
What the contractor bid How the marketing team
described it
Current AEC Process
New Model
Planning Design Bid Construction Occupancy
Design-Bid-Build
(Linear Process)
CM at Risk; Design-Build
(Collaborative Process)
Planning
Design
Construction
Occupancy
Planning
Design
Construction
Occupancy
CM at Risk; Design-Build
+ VDC/BIM
Technology-Enabled
Collaborative Process
( )
What Is BIM?
What is BIM?
Building
Information
Modeling
(BIM) Virtual Time Machine
Integrated Project Data
Data Sharing
Enhanced Visualization
Coordination
Collision Detection
Linked Parametric
Information
Process Collaboration
Interoperability
Digital
Intelligent
Object-Oriented
Data-Rich
... all based around the concept that BIM is a process of using technology
-- not just technology itself
There are so many definitions!
Building Information Modeling
▪ Software simulation of design, construction, and facility operation
▪ Virtual Construction - Building it twice – Once in the computer - Once in the field.
▪ Data-Rich Computer Model - Not just an electronic drawing tool.
▪ Object-Based (not just lines) Relational Database
▪ Intelligent ‘Drawings’: Data→ Physical and Functional Characteristics.
BIM =
BIM: Virtual Representations
▪ A BIM is a virtual representation of the physical and functional
characteristics of a facility, for good or bad.
BIM: Virtual Representations
Construction Model with BIM
Relational
Database
Civil Struc.
Elec.
Construction &
Operation
Design, Documents, & Data (3-D, 4-D, 5-D)
Arch.
Facility
Mgmt.
Fire
Prot.
Cost
Data
Mech.
Plumb.
Concept & Design
Why does this happen?
How the subcontractor
installed it
How the project was
Documented
How the owner
was billed
When it was delivered What the owner really wanted
How the owner
requested it
How the design team modeled
it
What the owner visualized and
approved.
What the contractor bid How the marketing team
described it
AEC Process With BIM
Influence vs Cost Curve
E
ff
o
rt Typical
‘Value’ Engineeri.
Whats the BIM IdeaWhy does this happenProjec.docx
Whats the BIM Idea?
Why does this happen?
Project Delivery Methods
▪ Traditional
Owner
Contractor
Architect &
Engineer
Sub. Sub. Sub. Sub.Sub.
Design-Bid-Build
Current Models
Planning Design Bid Construction Occupancy
Design-Bid-Build
(Linear Process)
CM at Risk; Design-Build
(Collaborative Process)
Planning
Design
Construction
Occupancy
Current Construction Model
Concept & Design
Civil
Struc.
Mech.
Elec.Plumb.
Fire
Prot.
Arch.
Construction &
Operation
2-D Drawings & Specifications
Coordination / Quality
RFI
RFI
RFI
RFI
RFI
RFI
Uncoordinated Drawings = Multiple RFI’s
Why does this happen?
How the subcontractor
installed it
How the project was
Documented
How the owner
was billed
When it was delivered What the owner really wanted
How the owner
requested it
How the project manager
understood it
How the architect
designed it
What the contractor bid How the marketing team
described it
Current AEC Process
New Model
Planning Design Bid Construction Occupancy
Design-Bid-Build
(Linear Process)
CM at Risk; Design-Build
(Collaborative Process)
Planning
Design
Construction
Occupancy
Planning
Design
Construction
Occupancy
CM at Risk; Design-Build
+ VDC/BIM
Technology-Enabled
Collaborative Process
( )
What Is BIM?
What is BIM?
Building
Information
Modeling
(BIM) Virtual Time Machine
Integrated Project Data
Data Sharing
Enhanced Visualization
Coordination
Collision Detection
Linked Parametric
Information
Process Collaboration
Interoperability
Digital
Intelligent
Object-Oriented
Data-Rich
... all based around the concept that BIM is a process of using technology
-- not just technology itself
There are so many definitions!
Building Information Modeling
▪ Software simulation of design, construction, and facility operation
▪ Virtual Construction - Building it twice – Once in the computer - Once in the field.
▪ Data-Rich Computer Model - Not just an electronic drawing tool.
▪ Object-Based (not just lines) Relational Database
▪ Intelligent ‘Drawings’: Data→ Physical and Functional Characteristics.
BIM =
BIM: Virtual Representations
▪ A BIM is a virtual representation of the physical and functional
characteristics of a facility, for good or bad.
BIM: Virtual Representations
Construction Model with BIM
Relational
Database
Civil Struc.
Elec.
Construction &
Operation
Design, Documents, & Data (3-D, 4-D, 5-D)
Arch.
Facility
Mgmt.
Fire
Prot.
Cost
Data
Mech.
Plumb.
Concept & Design
Why does this happen?
How the subcontractor
installed it
How the project was
Documented
How the owner
was billed
When it was delivered What the owner really wanted
How the owner
requested it
How the design team modeled
it
What the owner visualized and
approved.
What the contractor bid How the marketing team
described it
AEC Process With BIM
Influence vs Cost Curve
E
ff
o
rt Typical
‘Value’ Engineeri ...
How BIM can help you in sustainable building.pdf
The technology of BIM marks a strong approach that has great results in making LEEDcertified sustainable building designs come into reality in the construction industry. The terminology of LEED stands for Leadership in Energy and Environmental Design. It is the process that is undertaken by the team for green building rating systems across the world. It is a proven method that helps reduce cost and is laid as the foundation for cost savings.
Experimental BIM Use Comparison on Stanford Hospital Cath Labs
This presentation is a cost comparison between three nearly identical projects where the only variable is the use of BIM. The first cath lab was delivered using a traditional CAD approach, the second cath lab used industry standard BIM (modeling objects down to 2"), and the third cath lab modeled everything including studs and outlet boxes. The change order rates dropped to practically nothing but the costs were a bit surprising.
Visibuild
How do you experience architecture? Do you fly around through the air, cutting away walls and roofs when convenient? Most people do not do it that way. No, architecture is experienced with two feet on the ground by us mere mortals. Visibuild offers architects and artists the opportunity to visualize 3d environments that are interactive – that you can walk around in.
Digital construction for DfMA
Here are the steps to log a defect using the DALUX Field app:
1. Open the DALUX Field app and log in.
2. Tap the "New Defect" button.
3. Select the appropriate category for the defect (e.g. Architecture, MEP, etc.).
4. Provide a brief description of the defect.
5. Select the object/element where the defect was found.
6. Specify the exact location of the defect on site. You can also attach photos.
7. Submit the defect report. It will be routed to the appropriate team for review/action.
8. You can view the status of all submitted defects
BIM Consulting Services.pptx
Silicon Valley is a trusted global BIM Consulting Services provider, helping professionals adopt BIM for over a decade. With advanced CAD technology, we offer powerful tools for effective project planning and execution. Our tailored services enable enhanced collaboration, visualization, cost estimation, clash detection, and scheduling. Optimize your construction process with our expertise for successful project delivery.
Silicon Valley, a reputable company, specializes in providing BIM Consulting Services. With a team of BIM experts, we offer customized solutions to meet your specific needs and requirements. Our comprehensive BIM Consultancy Services ensure optimal project outcomes. Partner with us for top-quality BIM solutions tailored to your success.
Similar to BIM vs Risk on Stanford Cath 9 (20)
IFMA Presentation: BIM Making the Facility Manager's Life Easier
IFMA Presentation: BIM Making the Facility Manager's Life Easier
High-tech Healthcare Symposium: BIM for High-tech Healthcare
High-tech Healthcare Symposium: BIM for High-tech Healthcare
Building Information Modeling (BIM) in Industrial Projects
Building Information Modeling (BIM) in Industrial Projects
5 reasons why bim adoption is important for architects
5 reasons why bim adoption is important for architects
Experimental BIM Use Comparison on Stanford Hospital Cath Labs
Experimental BIM Use Comparison on Stanford Hospital Cath Labs
More from Eric Peabody
HCD 2020 Data-model Driven Master Planning: Merging Departments to Create an ...
This document summarizes a presentation about using data-driven analysis to plan an integrated interventional platform by merging departments at Stanford Health Care. Key points discussed include collecting utilization and volume data from multiple sources; analyzing past trends and projecting future demand; using the analysis to identify opportunities to optimize processes and reduce space needs; and how the data-driven approach improved confidence in the resulting master plan compared to previous intuition-based approaches. The presentation concludes with positive feedback from hospital leadership on how the new plan is better than previous proposals and their excitement about the opportunities identified through this analysis.
LCI Congress 2018 WB1 Start with Respect for People and Improvement Will Follow
Understand how the history of Lean is founded in Respect for People. Learn how three organizations developed a Lean journey strategy centered on Respect for People. Identify common Respect-related mistakes firms make in their Lean transformation efforts. Be aware of a few Lean tools for enhancing Respect in any organization.
2016 California Building Code Updates for Science & Education
Get up to date with the key changes in the 2016 California Building Code that affect Science and Education projects including new all-gender restrooms and an overview of chemical control areas vs laboratory suites.
2016 California Building Code Updates for Healthcare
Highlights of the significant changes in the 2016 California Building Code that affect healthcare projects including OSHPD PIN 65 on all-gender restrooms, overview of the various OSHPD plan review pathways, overview of the electronic plan check system, and NFPA 101 as required for The Joint Commission and CMS.
Gleaning Insight from Information: A Strategy for Understanding Customer Value
Lean design is predicated on identifying and delivering customer value. These values are deeply rooted within an individual or an organization and difficult to extract, by people trained in the design and construction but not in understanding the complexities of human behavior. To address this need, Taylor Design has evolved its model of practice by teaming a staff of strategists trained in the social sciences with its staff of architects and designers in the delivery of design services.
Revit for Small Projects: Is it worth the effort?
This document discusses the benefits of using BIM (Building Information Modeling) on small projects. It outlines that BIM can help draw faster with families and keynotes, provide automatic coordination through elevation to plan coordination and drawing set creation. BIM also enables better coordination for projects with complex mechanical, electrical, and plumbing systems through 3D modeling. Case studies demonstrate that even on tiny projects, BIM allowed drawing lines faster and using detail components. Larger projects saw benefits of automatic calculations, 3D coordination to prevent errors, and laser scanning for complex renovations. A study of three medical procedure rooms found that increasing BIM use reduced construction costs by up to 15%, change order costs by over 90%, and construction time by
A Formula for LEED Gold: Lab Remodels without Added Project Costs
There have been four LEED Lab Remodels completed in the UC/CSU/CCC systems; three at UCSF and one at UC Davis. This presentation discusses the results of a comparative analysis of the LEED submittals of all four projects and proposes a formula for achieving LEED Gold on lab remodels with minimal additional project costs. The formula we will be presenting is only one credit away from achieving LEED Platinum without significant cost increases. This work validates that sustainability is more tactical than costly. We will also discuss sustainability issues for lab remodels that go beyond current LEED metrics including frugal planning, energy zoning, and building fewer square feet. Most of these issues will apply broadly to other types of interior remodels in existing buildings.
Stanford Hybrid OR - Interventional Radiology + Neurosurgery
This hybrid operating room combines interventional radiology and neurosurgery with a Siemens bi-plane angiography system at its core. See how the staffing and procedures are set up to use the room for the different modalities. This project was delivered using 3D building information modeling (BIM) which is a process that parallels the work being done in the room itself. We use sophisticated 3D imaging to evaluate the building systems and then surgically remove and replace systems.
AIA NTAP Conference Set Based Design
The construction industry is one of the only industries with declining productivity. Tools like BIM, IPD, and Lean aim to reverse this trend. Set-based Concurrent Design is a Lean alternative to the traditional iterative design loops and enables projects to be designed 10 to 15 times faster.
Lean Community at Herrero: Set Based Desgin
Implementation and results of Set Based Concurrent Engineering in the design phase and in construction documents detailing.
Labs21 Conference: BIM for Sustainable Labs
This is a presentation that I delivered at the Labs21 Conference in Charleston, SC on October 4 2007. This is an older verson of the UC, CSU, CCC Sustainability Conference presentation but at the end it includes a nice demonstration of how BIM can be used to track LEED credits.
UC, CSU, CCC Sustainability Conference: BIM for Sustainability
This is a presentation that I delivered at the UC, CSU, CCC Sustainability Conference in SLO on July 31 2008. This presentation focuses on the sustainable advantages to designing in BIM.
More from Eric Peabody (12)
HCD 2020 Data-model Driven Master Planning: Merging Departments to Create an ...
HCD 2020 Data-model Driven Master Planning: Merging Departments to Create an ...
LCI Congress 2018 WB1 Start with Respect for People and Improvement Will Follow
LCI Congress 2018 WB1 Start with Respect for People and Improvement Will Follow
2016 California Building Code Updates for Science & Education
2016 California Building Code Updates for Science & Education
2016 California Building Code Updates for Healthcare
2016 California Building Code Updates for Healthcare
Gleaning Insight from Information: A Strategy for Understanding Customer Value
Gleaning Insight from Information: A Strategy for Understanding Customer Value
A Formula for LEED Gold: Lab Remodels without Added Project Costs
A Formula for LEED Gold: Lab Remodels without Added Project Costs
Stanford Hybrid OR - Interventional Radiology + Neurosurgery
Stanford Hybrid OR - Interventional Radiology + Neurosurgery
UC, CSU, CCC Sustainability Conference: BIM for Sustainability
UC, CSU, CCC Sustainability Conference: BIM for Sustainability
Recently uploaded
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Trusted Execution Environment for Decentralized Process Mining
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Public CyberSecurity Awareness Presentation 2024.pptx
Cyber security awareness slides for a busisness by TreeTop Security
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Free A4 downloadable and printable Cyber Security, Social Engineering Safety and security Training Posters . Promote security awareness in the home or workplace. Lock them Out From training providers datahops.com
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Recently uploaded (20)
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Trusted Execution Environment for Decentralized Process Mining
Trusted Execution Environment for Decentralized Process Mining
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Public CyberSecurity Awareness Presentation 2024.pptx
Public CyberSecurity Awareness Presentation 2024.pptx
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
BIM vs Risk on Stanford Cath 9
- 4. 3D Laser Survey The Design Partnership LLP Architects + Planners Point Cloud 3D Solids Model
- 5. The Design Partnership LLP Architects + Planners
- 6. Building Information Modeling (BIM) The Design Partnership LLP Architects + Planners
- 7. Virtual Simulation/Pre-visualization The Design Partnership LLP Architects + Planners
- 8. The Design Partnership LLP Architects + Planners
- 9. The Design Partnership LLP Architects + Planners
- 10. Clash Detection & Coordination The Design Partnership LLP Architects + Planners Where is the coordination error? Structural Plan Mechanical Plan
- 11. The Design Partnership LLP Architects + Planners
- 14. 3D Shop Drawings The Design Partnership LLP Architects + Planners
- 15. The Design Partnership LLP Architects + Planners Image courtesy of Marelich Mechanical
- 16. The Design Partnership LLP Architects + Planners Image courtesy of Marelich Mechanical
- 17. Direct Fabrication The Design Partnership LLP Architects + Planners
- 18. The Design Partnership LLP Architects + Planners Images courtesy of Marelich Mechanical Direct Fabrication
- 19. The Design Partnership LLP Architects + Planners Direct Fabrication
- 20. The Design Partnership LLP Architects + Planners Direct Fabrication
- 21. The Design Partnership LLP Architects + Planners Direct Fabrication
- 22. Prefabrication The Design Partnership LLP Architects + Planners
- 23. The Design Partnership LLP Architects + Planners Prefabrication
- 24. The Design Partnership LLP Architects + Planners Prefabrication
- 25. The Design Partnership LLP Architects + Planners Prefabrication
- 26. The Design Partnership LLP Architects + Planners Prefabrication
- 31. Waste Reduction in Design The Design Partnership LLP Architects + Planners
- 34. Waste Reduction in the Shop The Design Partnership LLP Architects + Planners
- 35. The Design Partnership LLP Architects + Planners Images courtesy of Marelich Mechanical Efficiency Algorithms
- 36. The Design Partnership LLP Architects + Planners No Part Duplication
- 37. Waste Reduction in the Field The Design Partnership LLP Architects + Planners
- 38. The Design Partnership LLP Architects + Planners Just-in-time Delivery
- 39. The Design Partnership LLP Architects + Planners Image courtesy of Marelich Mechanical
- 40. The Design Partnership LLP Architects + Planners
- 41. The Design Partnership LLP Architects + Planners Image courtesy of Marelich Mechanical
- 42. The Design Partnership LLP Architects + Planners
- 44. The Big BIM/IPD/Lean Idea The Design Partnership LLP Architects + Planners
- 49. Reduced Risk for All = Reduced Cost Architect’s Exposure However Architect’s Risk The Design Partnership LLP Architects + Planners
Editor's Notes
- Show TruView Demo.
- Go to Revit demo after this slide. Focus on 3D views, and explain that the drawings are views of a model, not drafted abstractions.
- Go to Navisworks demo after this slide.