Spiral Wound Gasket Basics, Components, Marking, Color Coding for EngineerVarun Patel
Spiral wound gasket Fundamentals, Components, Material and color coding.
Subscribe -https://goo.gl/9OktFA
Website: http://hardhatengineer.com
Spiral wound gaskets are fabricated from thin metal strip sandwiched
between layered of non-metallic filler. SWG has alternative spiral layers of thin metal sheet and filler material. As these layers are wounded in
continues spiral forms, these types of gaskets are known as spiral wound gasket. These gaskets are extremely popular due to the wide variety of available styles and sizes.
This YouTube Channel is dedicated to all Engineers working in Oil & Gas and related Energy Business. In this channel, You will learn about Piping, Piping Components such as pipe, fittings, Flanges, Gaskets and many other topics.
Check the following web pages to learn various subjects.
Fundamentals of Pipe - http://hardhatengineer.com/pipe/
Pipe Manufacturing Process - http://hardhatengineer.com/pipe/pipe-manufacturing-process/
Pipe Inspection, Testing, and Marking - http://hardhatengineer.com/pipe/pipe-inspection-testing-marking/
Pipe Fittings - http://hardhatengineer.com/pipe-fittings/
Pipe Fittings Manufacturing Process - http://hardhatengineer.com/pipe-fittings/pipe-fittings-manufacturing-process/
Pipe Fittings Dimensions and Material - http://hardhatengineer.com/pipe-fittings/pipe-fitting-dimensions-material/
Pipe Fittings Inspection - http://hardhatengineer.com/pipe-fittings/pipe-fittings-inspection-testing/
Types of Flanges, Flange Faces Types - http://hardhatengineer.com/types-flanges-used-piping/
Blog post covers various topics such as difference between Code & Standard, Piping Vs Pipeline, API 5L PSL1 Vs PSL2, etc. - http://hardhatengineer.com/blog/
Spiral Wound Gasket Basics, Components, Marking, Color Coding for EngineerVarun Patel
Spiral wound gasket Fundamentals, Components, Material and color coding.
Subscribe -https://goo.gl/9OktFA
Website: http://hardhatengineer.com
Spiral wound gaskets are fabricated from thin metal strip sandwiched
between layered of non-metallic filler. SWG has alternative spiral layers of thin metal sheet and filler material. As these layers are wounded in
continues spiral forms, these types of gaskets are known as spiral wound gasket. These gaskets are extremely popular due to the wide variety of available styles and sizes.
This YouTube Channel is dedicated to all Engineers working in Oil & Gas and related Energy Business. In this channel, You will learn about Piping, Piping Components such as pipe, fittings, Flanges, Gaskets and many other topics.
Check the following web pages to learn various subjects.
Fundamentals of Pipe - http://hardhatengineer.com/pipe/
Pipe Manufacturing Process - http://hardhatengineer.com/pipe/pipe-manufacturing-process/
Pipe Inspection, Testing, and Marking - http://hardhatengineer.com/pipe/pipe-inspection-testing-marking/
Pipe Fittings - http://hardhatengineer.com/pipe-fittings/
Pipe Fittings Manufacturing Process - http://hardhatengineer.com/pipe-fittings/pipe-fittings-manufacturing-process/
Pipe Fittings Dimensions and Material - http://hardhatengineer.com/pipe-fittings/pipe-fitting-dimensions-material/
Pipe Fittings Inspection - http://hardhatengineer.com/pipe-fittings/pipe-fittings-inspection-testing/
Types of Flanges, Flange Faces Types - http://hardhatengineer.com/types-flanges-used-piping/
Blog post covers various topics such as difference between Code & Standard, Piping Vs Pipeline, API 5L PSL1 Vs PSL2, etc. - http://hardhatengineer.com/blog/
Fundamental of Pipe / Pipeline used in Process Piping.Varun Patel
Learn about every aspect of pipe that used in process piping in Oil & Gas Industries. This small pipe handbook cum guide includes Fundamental of pipe, types of pipe, manufacturing, dimension, testing, hydro testing, inspection, and marking.
There are over 100,000 engineering materials to choose from. The typical design engineer should have ready access to information on 30 to 60 materials, depending on the range of applications he or she deals with.
Pneumatic circuit is combination of various pneumatic elements arranged in a systematic manner to perform certain task. In this presentation you will able to learn different types of pneumatic circuits.
WMSP Diverter is an annular type BOP which will close and seal off on tubulars in the well bore or completely seal off the open hole to full rated working pressure by compression of a reinforced packing unit. The 29 1/2″ 500 psi WMSP Diverter has been developed for use on surface installations.
Bearing failure and its Causes and Countermeasuresdutt4190
A brief review about bearing and failure of its various parts due to other possibilities than design such as manufacturing, improper service and handling and other similar aspects.
Design procedure for Cast iron pulley, Flat belt drive, V belt drive, Chain d...Dr.S.Thirumalvalavan
Title: UNIT-I; Design Procedure of Cast iron pulley, Flat belt drive, V belt drive, Chain drive & Wire ropes.
Subject Name: ME8651 - Design of Transmission Systems (DTS) B.E. Mechanical Engineering
Third Year, VI Semester
[Anna University R-2017]
Fundamental of Pipe / Pipeline used in Process Piping.Varun Patel
Learn about every aspect of pipe that used in process piping in Oil & Gas Industries. This small pipe handbook cum guide includes Fundamental of pipe, types of pipe, manufacturing, dimension, testing, hydro testing, inspection, and marking.
There are over 100,000 engineering materials to choose from. The typical design engineer should have ready access to information on 30 to 60 materials, depending on the range of applications he or she deals with.
Pneumatic circuit is combination of various pneumatic elements arranged in a systematic manner to perform certain task. In this presentation you will able to learn different types of pneumatic circuits.
WMSP Diverter is an annular type BOP which will close and seal off on tubulars in the well bore or completely seal off the open hole to full rated working pressure by compression of a reinforced packing unit. The 29 1/2″ 500 psi WMSP Diverter has been developed for use on surface installations.
Bearing failure and its Causes and Countermeasuresdutt4190
A brief review about bearing and failure of its various parts due to other possibilities than design such as manufacturing, improper service and handling and other similar aspects.
Design procedure for Cast iron pulley, Flat belt drive, V belt drive, Chain d...Dr.S.Thirumalvalavan
Title: UNIT-I; Design Procedure of Cast iron pulley, Flat belt drive, V belt drive, Chain drive & Wire ropes.
Subject Name: ME8651 - Design of Transmission Systems (DTS) B.E. Mechanical Engineering
Third Year, VI Semester
[Anna University R-2017]
Handling and use of toll such as tube cutter ,tube bender ,flaring tool pliers , service gauge ,soldering and brazing joint etc
I hope it will be most helpful for you. Thank you
Asheesh kushwaha
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Novel Design and Model of Punching Machine Driven By Electromagnetic ActuatorIDES Editor
The greatest challenge faced by an engineer is
to overcome the energy wasted due to friction in any
mechanical process. In a conventional punching process,
mechanical or hydraulic force is used to operate the punch
which involves large amounts of metal to metal contact in the
drive system components, as well as inaccuracy in the control
of the punching forces at the micro level. This paper introduces
the basic construction of an Electromagnetic assisted punching
machine to carry out the punching operation. The punching
force is generated by an electromagnetic coil wound around a
metal core. Since the proposed design replaces Mechanical or
hydraulic drive with an electromagnetic actuator, the setup is
capable of perfectly controlling the force generated by the
controlling the power supplied. The micro punching setup is
designed to punch small parts at a precisely controlled rate of
power consumption and thus the process becomes a low friction,
high efficiency process. After successful fabrication, the setup
was tested and the punching force produced was validated.
The punched samples were further analyzed optically for any
defects such as burring and those results were documented.
HAND TOOLS USED AT ELECTRONICS WORK PRESENTED BY KOUSTAV SARKARKOUSTAV SARKAR
Use of proper tools save both time & energy. It makes work energy, smooth, neat. A good knowledge about tools helps us to select the proper tools for using a particular job.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Water billing management system project report.pdfKamal Acharya
Our project entitled “Water Billing Management System” aims is to generate Water bill with all the charges and penalty. Manual system that is employed is extremely laborious and quite inadequate. It only makes the process more difficult and hard.
The aim of our project is to develop a system that is meant to partially computerize the work performed in the Water Board like generating monthly Water bill, record of consuming unit of water, store record of the customer and previous unpaid record.
We used HTML/PHP as front end and MYSQL as back end for developing our project. HTML is primarily a visual design environment. We can create a android application by designing the form and that make up the user interface. Adding android application code to the form and the objects such as buttons and text boxes on them and adding any required support code in additional modular.
MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software. It is a stable ,reliable and the powerful solution with the advanced features and advantages which are as follows: Data Security.MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Technical Drawings introduction to drawing of prisms
basic concepts of turnbuckle
1. GANDHINAGAR INSTITUTE OF
TECHNOLOGY
ACTIVE LEARNING ASIGNMENT
TOPIC- Turn Buckle
SUBJECT - Machine Design And Industrial Drafting (2141907)
BATCH- C-2 Mechanical
ENROLLMENT NO. - 150120119158
GUIDED BY-Prof. Vrajesh
Makwana
2. DEFINATION OF TURNBUCKLE
Two round tie rods subjected to tensile
loading
These rods are connected by coupling
This is known as Turnbuckle
3. INSTRUCTIONS FOR USE
Straight or in-line pulling only.
It should be paid to prevent overloading.
1. Tensioning : the forces on the turnbuckle must not be such tha
any deformation occurs.
2. Deformation : The tension should be decreased immediately
and deformed parts should be replaced.
The products are regularly inspected.
Inspection should take place in accordance with the safety
standards given in the country of use like wear, misuse,
overloading etc. with a consequence of deformation and
alteration of the steel structure
5. THEORY
A turnbuckle, stretching screw or bottle screw is a device for
adjusting the tension or length of ropes, cables, tie rods, and
other tensioning systems.
It normally consists of two threaded eye bolts,
1. With a left hand thread
2. With a right hand thread
A metal coupling device consisting of an oblong piece internally
threaded at both ends into which the corresponding sections of
two threaded rods are screwed in order to form a unit that can
be adjusted for tension or length.
7. USE OF TURNBUCKLES
This is used for Connecting Tie Rods Of stuctures
This is used for Connecting links
This is used for Connecting wire
This is used for Connecting tension support of vertical
pole
8. Diameter of roads:-
Tearing resistence of the threads of the
rod,
EQUATIONS:-
2
4 tcd
• Length of the couple nut:-
2 2
4
d c cP d d n l
9. 2 2
4
tP D d
Outside diameter of couple nut:-
Outside diameter of the coupler:-
2 1
2 1
4
tP D D