Automotive tools.ppt
•Download as PPT, PDF•
1 like•3,703 views
This document provides an overview of common automotive tools categorized into hand tools, measuring tools, cutting tools, power tools, lifting equipment, cleaning equipment, and specialty tools. It describes the main types of tools in each category such as screwdrivers, pliers, hammers, wrenches, socket wrenches, hacksaws, files, drills, jacks, solvent tanks, and various measuring tools used in automotive repair.
Report
Share
Report
Share
Recommended
AUTOMOTIVE
1. Adjustable wrenches can be used to tighten nuts and bolts of various sizes but are only suitable for applying light torque. Socket wrenches have detachable sockets that come in various sizes and types and are better for applying higher torque.
2. Power tools include electric tools like drills, pneumatic tools that are air-powered, and hydraulic tools like jacks. Safety precautions must be followed like wearing eye protection and not dragging tools by their cords or hoses.
3. Broken bolts and studs can be removed using methods like filing flats, drilling and using an extractor, depending on where the break occurred.
AUTOMOTIVE TOOLS AND EQUIPMENT.pptx
Automotive tools are essential for automotive repairs and modifications as they make tasks easier to complete without errors or delays. The document discusses various types of automotive tools including cleaning tools, bending/holding/twisting/crimping tools, cutting tools, loosening and tightening tools, and files. It emphasizes selecting the appropriate tools for each task and prioritizing safety when working. A variety of pliers, wrenches, screwdrivers and other tools are described.
Hand Tools use in car workshop
Engine Hand Tools document defines hand tools as tools powered by hand rather than a motor. It discusses the purpose of hand tools for tasks like hammering, tightening, loosening, cutting, drilling, removing, and installing machine parts. It provides safety guidelines for using tools and lists common tools like screwdrivers, spanner sets, pliers, hydraulic jacks, L-key sets, and socket sets. For each tool type, it provides a brief explanation of its uses.
Mechanic motor vehicle tool list with picture and uses
The document provides a list of tools and equipment for a mechanic motor vehicle course. It includes 19 items such as Allen key sets, calipers, center punches, dividers, and screwdrivers. It then lists another 49 items including accessories for air compressors, angle plates, anvils, battery chargers, carburetor repair kits, chisels, clamps, and cutaway models of vehicle components for demonstration purposes. The complete list covers a wide range of hand tools, measuring instruments, shop equipment, and teaching aids needed for motor vehicle repair and maintenance training.
AUTOMOTIVE LEARNING MODULE K-12 2ND EDIT
This document provides information on learning materials for automotive detailing. It covers the objectives, process, and key steps for detailing the exterior and interior of a vehicle. The exterior detailing section includes car washing, polishing, waxing, cleaning windows and doors, and dressing wheels and tires. The interior detailing section focuses on cleaning techniques and tools. The document provides pictures and descriptions of the tools, materials, and steps needed for each detailing procedure. The overall goal is to teach the skills and knowledge required to professionally detail a vehicle's exterior and interior surfaces.
Hand tools
Hand tools are tools that are operated without electricity and include hammers, hacksaws, punches, files, screwdrivers, wrenches, sockets, chisels and snips. Common hand tools used in metal work are ball peen hammers for bending and shaping metal, centre punches for locating holes, standard and Philips screwdrivers, files in various shapes for smoothing metal, and wrenches for applying torque. Hand tools also include hacksaws for cutting metal, tin snips in straight and curved styles for cutting sheet metal, and chisels for cutting and shearing metal.
K to 12 automotive learning module
Here are some key points to remember when preparing and using hand tools:
1. Check tools for proper operation and safety. Inspect tools for defects like cracks, chips,
bends or loose parts that can cause injury. Make sure cutting edges are sharp.
2. Identify unsafe or faulty tools. Tools that are worn out, damaged or have loose parts are
unsafe to use and need to be repaired or replaced. Mark them clearly.
3. Mark tools for repair according to standard procedures. Use tags, labels or markings to
identify tools that need repair. Note down the repairs needed.
4. Select the right tool for the job. Using the wrong tool can damage the workpiece or
cause
Hand Tools
This slide was made for a first-semester course named Professional Development Seminar (IPE 152). A very basic slide about different types of hand tools used in workshops.
Recommended
AUTOMOTIVE
1. Adjustable wrenches can be used to tighten nuts and bolts of various sizes but are only suitable for applying light torque. Socket wrenches have detachable sockets that come in various sizes and types and are better for applying higher torque.
2. Power tools include electric tools like drills, pneumatic tools that are air-powered, and hydraulic tools like jacks. Safety precautions must be followed like wearing eye protection and not dragging tools by their cords or hoses.
3. Broken bolts and studs can be removed using methods like filing flats, drilling and using an extractor, depending on where the break occurred.
AUTOMOTIVE TOOLS AND EQUIPMENT.pptx
Automotive tools are essential for automotive repairs and modifications as they make tasks easier to complete without errors or delays. The document discusses various types of automotive tools including cleaning tools, bending/holding/twisting/crimping tools, cutting tools, loosening and tightening tools, and files. It emphasizes selecting the appropriate tools for each task and prioritizing safety when working. A variety of pliers, wrenches, screwdrivers and other tools are described.
Hand Tools use in car workshop
Engine Hand Tools document defines hand tools as tools powered by hand rather than a motor. It discusses the purpose of hand tools for tasks like hammering, tightening, loosening, cutting, drilling, removing, and installing machine parts. It provides safety guidelines for using tools and lists common tools like screwdrivers, spanner sets, pliers, hydraulic jacks, L-key sets, and socket sets. For each tool type, it provides a brief explanation of its uses.
Mechanic motor vehicle tool list with picture and uses
The document provides a list of tools and equipment for a mechanic motor vehicle course. It includes 19 items such as Allen key sets, calipers, center punches, dividers, and screwdrivers. It then lists another 49 items including accessories for air compressors, angle plates, anvils, battery chargers, carburetor repair kits, chisels, clamps, and cutaway models of vehicle components for demonstration purposes. The complete list covers a wide range of hand tools, measuring instruments, shop equipment, and teaching aids needed for motor vehicle repair and maintenance training.
AUTOMOTIVE LEARNING MODULE K-12 2ND EDIT
This document provides information on learning materials for automotive detailing. It covers the objectives, process, and key steps for detailing the exterior and interior of a vehicle. The exterior detailing section includes car washing, polishing, waxing, cleaning windows and doors, and dressing wheels and tires. The interior detailing section focuses on cleaning techniques and tools. The document provides pictures and descriptions of the tools, materials, and steps needed for each detailing procedure. The overall goal is to teach the skills and knowledge required to professionally detail a vehicle's exterior and interior surfaces.
Hand tools
Hand tools are tools that are operated without electricity and include hammers, hacksaws, punches, files, screwdrivers, wrenches, sockets, chisels and snips. Common hand tools used in metal work are ball peen hammers for bending and shaping metal, centre punches for locating holes, standard and Philips screwdrivers, files in various shapes for smoothing metal, and wrenches for applying torque. Hand tools also include hacksaws for cutting metal, tin snips in straight and curved styles for cutting sheet metal, and chisels for cutting and shearing metal.
K to 12 automotive learning module
Here are some key points to remember when preparing and using hand tools:
1. Check tools for proper operation and safety. Inspect tools for defects like cracks, chips,
bends or loose parts that can cause injury. Make sure cutting edges are sharp.
2. Identify unsafe or faulty tools. Tools that are worn out, damaged or have loose parts are
unsafe to use and need to be repaired or replaced. Mark them clearly.
3. Mark tools for repair according to standard procedures. Use tags, labels or markings to
identify tools that need repair. Note down the repairs needed.
4. Select the right tool for the job. Using the wrong tool can damage the workpiece or
cause
Hand Tools
This slide was made for a first-semester course named Professional Development Seminar (IPE 152). A very basic slide about different types of hand tools used in workshops.
K to 12 Automotive Learning Module
This document provides an exploratory module on automotive servicing for grades 7 and 8. It covers five lessons: (1) use of hand tools, (2) mensuration and calculations, (3) interpretation of plans and drawings, (4) shop maintenance, and (5) occupational health and safety procedures. Each lesson defines terms, outlines learning outcomes and performance standards, and provides materials, activities, and assessments to help students learn key competencies for automotive servicing. The module aims to introduce students to the field of automotive servicing and prepare them for the Automotive Servicing National Certificate Level I.
Automotive 10
This document provides instructions for checking a vehicle before driving and procedures for driving a vehicle with a manual or automatic transmission. It begins by listing check procedures for various vehicle systems that should be performed before driving, such as oil level, tire pressure, and lights. It then describes techniques for starting and stopping a vehicle with a manual transmission, including how to shift gears smoothly. For automatic transmissions, it outlines how to operate basic controls and prepare the vehicle for driving safely. The document aims to teach readers how to move and position a vehicle according to industry standards.
Tools, Valves & Materials for Marine Use
The document discusses various tools, parts, and materials required for ship maintenance. It provides detailed descriptions and examples of common hand tools like wrenches, pliers, scissors, hammers, saws, and pullers. It also discusses power tools like grinders, drills, and lathe machines. Further, it outlines welding and cutting equipment like arc welding setups, plasma cutters, and oxy-acetylene torch setups. Proper procedures for hot work and manipulating variables for good welds are also covered. The document serves as a comprehensive reference for marine engineers on equipment and tools needed for ship repair and maintenance work.
BASIC HAND TOOLS
The document discusses various types of common hand tools used in woodworking and metalworking. It describes wrenches, screwdrivers including standard and Philips types, different types of pliers including long nose and locking pliers, hammers such as ball peen and rubber mallets, cutting tools including hacksaws, rip cut saws, keyhole saws, and cross cut saws. For each tool type, it provides details on usage and characteristics.
TLE9 Measuring and Marking tools
This document discusses various measuring and marking tools used in woodworking and construction. It identifies 10 essential measuring tools: tape measure, framing square, try square, combination square, sliding T-bevel, level, ruler, calipers, folding rule, and triangle. Calipers are used to measure internal or external distances and come in various types like inside, outside, and divider calipers. Marking tools are used to mark designs and include pencils, chalk lines, compasses, marking knives, and scribers. The document provides brief descriptions of the uses for each type of measuring and marking tool.
K to 12 automotive teachers guide
This document provides guidance for teachers on teaching Technology and Livelihood Education (TLE) exploratory courses in the K to 12 curriculum in the Philippines. It discusses the overall goal of developing 21st century skills in learners and preparing them for work or further education. TLE courses are offered in grades 7-8 and focus on developing technological proficiency through hands-on learning. The document outlines the conceptual framework for TLE, describes the 24 exploratory TLE courses, and explains the design of the learning modules and lessons to ensure competencies are taught according to industry standards set by the Technical Education and Skills Development Authority. It provides direction for teachers on implementing the various parts of the TLE lessons to maximize student learning.
Measuring tools
Tools are objects used to perform work and tasks that would otherwise be difficult or impossible. They can be hand tools that require no external power or power tools. Measuring tools are used to determine dimensions before other processes are applied. Common measuring tools include rulers, steel rules, combination squares, calipers, vernier calipers and dial calipers, which can measure internal or external sizes with precision.
K to 12 Welding Learning Module
Here are the key points about cutting tools:
- Hacksaw is used for cutting metals like plates, pipes, rods, and bars. It has an adjustable frame that holds replaceable blades with teeth.
- Files are made of hardened steel and have rows of teeth for shaping metal. They vary in shape, cut, and coarseness. Common types include flat, mill, square and round files.
- Cold chisels are wedge-shaped for cutting, shearing and chipping metal. Types include flat, cape, diamond, and round-nose chisels for different tasks.
- Scrapers remove burrs and edges from metal surfaces. Different shapes fit various purposes.
- Punches are
Automotive servicing
The document discusses the Automotive Servicing NC II program which trains students to inspect, maintain, and repair automotive vehicles. The program covers both mechanical and electrical components of vehicles. It is supervised by TESDA and can be incorporated into undergraduate degrees. The program provides an important skill and opportunities for employment and education.
Holding tools
The document discusses different types of clamps and vises used to securely hold work pieces for operations like grinding, bending, fitting, cutting, and machining. It describes bench clamps, C-clamps, drill vises, machinist vises, handvise V blocks with clamps, vise grips, tongs, and different types of pliers used for holding, cutting, and twisting wires. These tools securely grip work pieces for tasks like forging, machining, and other metalworking activities.
Hand tools
This document summarizes common hand tools used in elementary stagecraft. It describes measuring tools like tape measures, framing squares, and levels used to mark and check measurements. Cutting tools such as matte knives, saws, and power saws are used to cut materials to size. Shaping tools like rasps, sanders and routers shape and smooth wood edges. Joining tools include hammers, nail guns, and screwdrivers for assembling pieces, while wrenches and clamps are used to tighten fasteners or hold materials together temporarily. Strike tools like staple pullers, pry bars and nail pullers are used for disassembling sets.
Tool cleaning, storage, and maintenance
This document discusses proper techniques for cleaning, storing, and maintaining tools and equipment. It covers cleaning tools to keep them in good working order, storing tools neatly and safely to prevent loss or damage, and maintaining tools through regular inspection, calibration, and servicing to prevent failure and ensure safety. Specific maintenance procedures are provided for various tools and workshop equipment.
Ignition systems
The ignition system uses a battery, ignition coil, distributor, and spark plugs to generate a spark that ignites the fuel-air mixture in the engine's cylinders. The coil transforms a low voltage current from the battery into a high voltage spark. The distributor routes the spark to each cylinder in the proper firing order. Common ignition system types include battery ignition systems that use a distributor and magneto systems that generate sparks without a battery. Newer distributorless ignition systems have one coil and spark plug per cylinder and fire all plugs within one crankshaft revolution.
TLE-IA Automotive Servicing Curriculum Guide
This document outlines an automotive servicing curriculum for grades 7-9 in the Philippines. It covers topics such as basic concepts, career opportunities, safety practices, tools and equipment, measurements and calculations, manuals and specifications. The grade 7-8 portion is exploratory, covering common competencies. Grade 9 focuses on specialization, including servicing batteries and ignition systems. The curriculum aims to teach skills needed for an automotive servicing certificate. It includes learning objectives, content standards and performance standards for each topic.
Lightining system
Headlights and tail lights are the main lights used on vehicles. Headlights illuminate the road ahead for safe driving at night and usually have high and low beams. Tail lights make the rear of the vehicle visible to other drivers and often incorporate brake lights. Vehicles also have many interior lights, turn signals, parking lights, and other auxiliary lights to increase visibility and safety. Modern lighting systems are electric and carefully designed and positioned around the vehicle.
Performing Basic Preventive Maintenance.pptx
The document discusses preventive maintenance of carpentry tools. It outlines three types of maintenance: breakdown, preventive, and predictive. Preventive maintenance includes regular inspection, cleaning, and replacing parts to prevent failure. The document then provides steps for conducting basic preventive maintenance of hand tools and electric tools. This includes cleaning tools, inspecting cords, lubricating moving parts, and following maintenance schedules. Finally, it outlines steps for repairing defective tools, which involves inspecting for damage, identifying damaged parts, tightening loose parts, sharpening dull blades, and replacing parts that cannot be repaired.
Automotive starting system.
The starting system includes the battery, starter motor, solenoid, ignition switch, and neutral safety switch. The battery stores electrical energy to power the starter motor, a small electric motor that converts electrical energy into mechanical energy to spin the crankshaft. The solenoid connects the battery to the starter motor when activated. The ignition switch controls power to the starting system, while the neutral safety switch prevents starting in gear. Together, these components allow the engine to be started electrically.
Various work holding devices
This document summarizes various types of work holding devices used in lathe machines, including four jaw independent chucks, three jaw universal chucks, combination chucks, magnetic chucks, collet chucks, drill chucks, lathe centers, steady rests, follower rests, mandrels, lathe dogs, and lathe face plates. It provides brief descriptions of each device, highlighting their main features and purposes.
002 hand tools
Hand tools can be divided into noncutting tools like vises, hammers, and wrenches, and cutting tools like hacksaws and files. A bench vise is used to securely hold work for sawing, filing, drilling, and tapping. Hammers come in different sizes and types for various tasks. Wrenches like open-end, box-end, and combination are used to tighten and loosen nuts and bolts. Pliers are used for gripping and holding small parts. Proper tool selection and technique are important for safe and effective work.
Classification of Tools and Equipment.pptx
The document discusses the classification, maintenance, and identification of tools and equipment. It separates tools into three main categories: hand tools, power tools, and pneumatic tools. It provides examples for each category and outlines best practices for maintaining electrical tools, such as cleaning dust, inspecting cords, and proper storage. The document also discusses identifying non-functional tools through visual inspection, checking functionality and performance, power supply, and input from experienced personnel. Non-functional tools are those unable to perform their regular functions due to damaged or impaired parts.
Leatherman catalog - קטלוג אולרי לדרמן
The document is a catalog introducing the Leatherman Leap, a multi-tool designed specifically for younger users. It has features to allow safer use without a knife blade initially, which can be added later. It also has safety locks and an ergonomic grip designed for training proper tool use. The catalog provides specifications on the tool's materials, available colors, included tools, and dimensions.
Plumbing tools 2
This document discusses hand tools that plumbers commonly use. It identifies over 30 specific tools, including levels, tape measures, screwdrivers, pliers, wrenches, hammers, saws, chisels, and specialty tools for tasks like cutting and bending copper piping. It emphasizes that hand tools are manually operated, less expensive than power tools, and still important for completing plumbing jobs. Personal protective equipment is recommended when using all tools.
More Related Content
What's hot
K to 12 Automotive Learning Module
This document provides an exploratory module on automotive servicing for grades 7 and 8. It covers five lessons: (1) use of hand tools, (2) mensuration and calculations, (3) interpretation of plans and drawings, (4) shop maintenance, and (5) occupational health and safety procedures. Each lesson defines terms, outlines learning outcomes and performance standards, and provides materials, activities, and assessments to help students learn key competencies for automotive servicing. The module aims to introduce students to the field of automotive servicing and prepare them for the Automotive Servicing National Certificate Level I.
Automotive 10
This document provides instructions for checking a vehicle before driving and procedures for driving a vehicle with a manual or automatic transmission. It begins by listing check procedures for various vehicle systems that should be performed before driving, such as oil level, tire pressure, and lights. It then describes techniques for starting and stopping a vehicle with a manual transmission, including how to shift gears smoothly. For automatic transmissions, it outlines how to operate basic controls and prepare the vehicle for driving safely. The document aims to teach readers how to move and position a vehicle according to industry standards.
Tools, Valves & Materials for Marine Use
The document discusses various tools, parts, and materials required for ship maintenance. It provides detailed descriptions and examples of common hand tools like wrenches, pliers, scissors, hammers, saws, and pullers. It also discusses power tools like grinders, drills, and lathe machines. Further, it outlines welding and cutting equipment like arc welding setups, plasma cutters, and oxy-acetylene torch setups. Proper procedures for hot work and manipulating variables for good welds are also covered. The document serves as a comprehensive reference for marine engineers on equipment and tools needed for ship repair and maintenance work.
BASIC HAND TOOLS
The document discusses various types of common hand tools used in woodworking and metalworking. It describes wrenches, screwdrivers including standard and Philips types, different types of pliers including long nose and locking pliers, hammers such as ball peen and rubber mallets, cutting tools including hacksaws, rip cut saws, keyhole saws, and cross cut saws. For each tool type, it provides details on usage and characteristics.
TLE9 Measuring and Marking tools
This document discusses various measuring and marking tools used in woodworking and construction. It identifies 10 essential measuring tools: tape measure, framing square, try square, combination square, sliding T-bevel, level, ruler, calipers, folding rule, and triangle. Calipers are used to measure internal or external distances and come in various types like inside, outside, and divider calipers. Marking tools are used to mark designs and include pencils, chalk lines, compasses, marking knives, and scribers. The document provides brief descriptions of the uses for each type of measuring and marking tool.
K to 12 automotive teachers guide
This document provides guidance for teachers on teaching Technology and Livelihood Education (TLE) exploratory courses in the K to 12 curriculum in the Philippines. It discusses the overall goal of developing 21st century skills in learners and preparing them for work or further education. TLE courses are offered in grades 7-8 and focus on developing technological proficiency through hands-on learning. The document outlines the conceptual framework for TLE, describes the 24 exploratory TLE courses, and explains the design of the learning modules and lessons to ensure competencies are taught according to industry standards set by the Technical Education and Skills Development Authority. It provides direction for teachers on implementing the various parts of the TLE lessons to maximize student learning.
Measuring tools
Tools are objects used to perform work and tasks that would otherwise be difficult or impossible. They can be hand tools that require no external power or power tools. Measuring tools are used to determine dimensions before other processes are applied. Common measuring tools include rulers, steel rules, combination squares, calipers, vernier calipers and dial calipers, which can measure internal or external sizes with precision.
K to 12 Welding Learning Module
Here are the key points about cutting tools:
- Hacksaw is used for cutting metals like plates, pipes, rods, and bars. It has an adjustable frame that holds replaceable blades with teeth.
- Files are made of hardened steel and have rows of teeth for shaping metal. They vary in shape, cut, and coarseness. Common types include flat, mill, square and round files.
- Cold chisels are wedge-shaped for cutting, shearing and chipping metal. Types include flat, cape, diamond, and round-nose chisels for different tasks.
- Scrapers remove burrs and edges from metal surfaces. Different shapes fit various purposes.
- Punches are
Automotive servicing
The document discusses the Automotive Servicing NC II program which trains students to inspect, maintain, and repair automotive vehicles. The program covers both mechanical and electrical components of vehicles. It is supervised by TESDA and can be incorporated into undergraduate degrees. The program provides an important skill and opportunities for employment and education.
Holding tools
The document discusses different types of clamps and vises used to securely hold work pieces for operations like grinding, bending, fitting, cutting, and machining. It describes bench clamps, C-clamps, drill vises, machinist vises, handvise V blocks with clamps, vise grips, tongs, and different types of pliers used for holding, cutting, and twisting wires. These tools securely grip work pieces for tasks like forging, machining, and other metalworking activities.
Hand tools
This document summarizes common hand tools used in elementary stagecraft. It describes measuring tools like tape measures, framing squares, and levels used to mark and check measurements. Cutting tools such as matte knives, saws, and power saws are used to cut materials to size. Shaping tools like rasps, sanders and routers shape and smooth wood edges. Joining tools include hammers, nail guns, and screwdrivers for assembling pieces, while wrenches and clamps are used to tighten fasteners or hold materials together temporarily. Strike tools like staple pullers, pry bars and nail pullers are used for disassembling sets.
Tool cleaning, storage, and maintenance
This document discusses proper techniques for cleaning, storing, and maintaining tools and equipment. It covers cleaning tools to keep them in good working order, storing tools neatly and safely to prevent loss or damage, and maintaining tools through regular inspection, calibration, and servicing to prevent failure and ensure safety. Specific maintenance procedures are provided for various tools and workshop equipment.
Ignition systems
The ignition system uses a battery, ignition coil, distributor, and spark plugs to generate a spark that ignites the fuel-air mixture in the engine's cylinders. The coil transforms a low voltage current from the battery into a high voltage spark. The distributor routes the spark to each cylinder in the proper firing order. Common ignition system types include battery ignition systems that use a distributor and magneto systems that generate sparks without a battery. Newer distributorless ignition systems have one coil and spark plug per cylinder and fire all plugs within one crankshaft revolution.
TLE-IA Automotive Servicing Curriculum Guide
This document outlines an automotive servicing curriculum for grades 7-9 in the Philippines. It covers topics such as basic concepts, career opportunities, safety practices, tools and equipment, measurements and calculations, manuals and specifications. The grade 7-8 portion is exploratory, covering common competencies. Grade 9 focuses on specialization, including servicing batteries and ignition systems. The curriculum aims to teach skills needed for an automotive servicing certificate. It includes learning objectives, content standards and performance standards for each topic.
Lightining system
Headlights and tail lights are the main lights used on vehicles. Headlights illuminate the road ahead for safe driving at night and usually have high and low beams. Tail lights make the rear of the vehicle visible to other drivers and often incorporate brake lights. Vehicles also have many interior lights, turn signals, parking lights, and other auxiliary lights to increase visibility and safety. Modern lighting systems are electric and carefully designed and positioned around the vehicle.
Performing Basic Preventive Maintenance.pptx
The document discusses preventive maintenance of carpentry tools. It outlines three types of maintenance: breakdown, preventive, and predictive. Preventive maintenance includes regular inspection, cleaning, and replacing parts to prevent failure. The document then provides steps for conducting basic preventive maintenance of hand tools and electric tools. This includes cleaning tools, inspecting cords, lubricating moving parts, and following maintenance schedules. Finally, it outlines steps for repairing defective tools, which involves inspecting for damage, identifying damaged parts, tightening loose parts, sharpening dull blades, and replacing parts that cannot be repaired.
Automotive starting system.
The starting system includes the battery, starter motor, solenoid, ignition switch, and neutral safety switch. The battery stores electrical energy to power the starter motor, a small electric motor that converts electrical energy into mechanical energy to spin the crankshaft. The solenoid connects the battery to the starter motor when activated. The ignition switch controls power to the starting system, while the neutral safety switch prevents starting in gear. Together, these components allow the engine to be started electrically.
Various work holding devices
This document summarizes various types of work holding devices used in lathe machines, including four jaw independent chucks, three jaw universal chucks, combination chucks, magnetic chucks, collet chucks, drill chucks, lathe centers, steady rests, follower rests, mandrels, lathe dogs, and lathe face plates. It provides brief descriptions of each device, highlighting their main features and purposes.
002 hand tools
Hand tools can be divided into noncutting tools like vises, hammers, and wrenches, and cutting tools like hacksaws and files. A bench vise is used to securely hold work for sawing, filing, drilling, and tapping. Hammers come in different sizes and types for various tasks. Wrenches like open-end, box-end, and combination are used to tighten and loosen nuts and bolts. Pliers are used for gripping and holding small parts. Proper tool selection and technique are important for safe and effective work.
Classification of Tools and Equipment.pptx
The document discusses the classification, maintenance, and identification of tools and equipment. It separates tools into three main categories: hand tools, power tools, and pneumatic tools. It provides examples for each category and outlines best practices for maintaining electrical tools, such as cleaning dust, inspecting cords, and proper storage. The document also discusses identifying non-functional tools through visual inspection, checking functionality and performance, power supply, and input from experienced personnel. Non-functional tools are those unable to perform their regular functions due to damaged or impaired parts.
What's hot (20)
Similar to Automotive tools.ppt
Leatherman catalog - קטלוג אולרי לדרמן
The document is a catalog introducing the Leatherman Leap, a multi-tool designed specifically for younger users. It has features to allow safer use without a knife blade initially, which can be added later. It also has safety locks and an ergonomic grip designed for training proper tool use. The catalog provides specifications on the tool's materials, available colors, included tools, and dimensions.
Plumbing tools 2
This document discusses hand tools that plumbers commonly use. It identifies over 30 specific tools, including levels, tape measures, screwdrivers, pliers, wrenches, hammers, saws, chisels, and specialty tools for tasks like cutting and bending copper piping. It emphasizes that hand tools are manually operated, less expensive than power tools, and still important for completing plumbing jobs. Personal protective equipment is recommended when using all tools.
Grinding
grinding,grinding machines,binding materials, composite materials,furnaces, rubber ,allowance,fits tolerence.
FFA Tools Contest
The document lists various tools used in agriculture, construction, electrical work, and metal/wood working. It provides the name of over 100 tools and a 1-2 word description of their basic function, such as "turning nuts and bolts" or "cutting bushes".
plumbing_services.pdf
This chapter discusses the essential hand tools used by plumbers. It identifies common tools such as tape measures, levels, screwdrivers, pliers, wrenches, hammers, saws, snips, knives, chisels, and specialty tools for working with copper, plastic, and cast iron piping. The chapter emphasizes that hand tools are necessary for both new installation and repair work. It also stresses the importance of safety and using personal protective equipment when working with tools.
IDENTIFICATION AND APPLICATION OF CUTTING TOOLS FOR MILLING.pptx
This document discusses the identification and application of common cutting tools used in milling operations. It identifies the main types of milling tools like end mills, ball end mills, face mills, indexable end mills, drills, taps, and reamers. For each tool, it describes the purpose, materials, coatings, and applications. The goal is to teach how to visually identify these tools and understand their uses in milling processes.
lathe tools and drilling machine
The document discusses various aspects of lathe tools and drilling machines. It describes the single point cutting tool used on lathes and its main parts such as the cutting edge, nose, and flank. It also discusses different types of lathe tools used for generating external and internal surfaces. Further, it provides details about drilling machines, including different types of drills and drilling operations like reaming, boring, and tapping. It explains portable, sensitive, radial, and upright drilling machines based on their construction and applications.
Swastik Machine Tools
This document provides information about Swastik Machine Tools, which is an authorized distributor of machinery for various industries. It lists the types of machinery it distributes for industries like workshops, tool rooms, sheet metal fabrication, woodworking, and food processing. The document outlines Swastik's product range including air compressors, lathes, mills, grinders, sheet metal machinery, work holding equipment, material handling equipment, and woodworking machinery. It also mentions key achievements like exporting machines globally and providing after-sales service to over 300 compressors. Contact information is provided at the end.
Overview of furniture industries
Overview of Furniture Industries, Infractures of furniture industries, tools used in furniture industry, machineries used in furniture industries.
Black smithy mp report
The document summarizes various tools used in blacksmithing and their purposes, including:
- The ball-peen hammer which is used to round off edges and make gaskets.
- The centre punch which is used to mark the center point for drilling holes.
- Chisels which are used for cutting wood or metal when struck with a hammer, and come in various shapes for different materials and purposes.
- Square bit tongs which are used to hold small round or square pieces of iron.
- Flatters which have a flat surface and are used to provide a flat finish when struck with a hammer.
Encore Welding & Industrial Supply-062015
Encore Welding and Industrial Supply is a full-service supplier of welding equipment, industrial gases, safety products, and accessories. They offer a wide range of products for welding, industrial, and safety needs, as well as reliable service and a focus on customer satisfaction. With over 30 years of industry experience, their knowledgeable staff understands customers' challenges and goals and is ready to provide solutions to meet all needs.
Wawire
This document provides an overview of various hand tools that may be encountered in a workshop. It describes different types of striking tools like hammers, mallets and sledges and their proper uses. Turning tools such as wrenches, pliers and screwdrivers are also outlined. Other tool categories summarized include bladed woodworking tools, saws, abrasives, measuring tools and fasteners. The document stresses the importance of using tools as intended and keeping them well maintained.
Tools and materials
The document lists various hand tools and materials used in agriculture mechanics including different types of hammers, wrenches, drills, saws, levels, pliers, chisels, nails, screws, welding equipment and other hardware items. Precision measurement tools such as micrometers and digital calipers are included as well as tools for cutting, gripping, driving and installing various fasteners, hardware and plumbing fittings. A wide assortment of materials is also detailed spanning lumber, wire, rods, pipes, elbows, flanges and other items used in construction, fabrication and repair work.
Different tools used in workshop
the pronunciation of the technical name of of different tools available in workshop is important for engineer.
NTD WN16
The document appears to be a catalog listing various automotive tools and equipment for sale. It includes brief descriptions and prices for items like a tire bead seater, wheel torque kits, tire plug kits, welding gloves and safety equipment, lubrication products, power tools, shop supplies, and more. The listings span multiple pages and categories of the catalog.
What is Plumbing Tool and work of Plumbing Tools.
There are many different tools that a plumber can use. Depending on the job and the location the tools can range from very small to very large. The types of tools depend on whether your installing or repairing as well.
In this presentation we will look at a typical plumbers tool kit. What you should have on hand for most basic jobs.
More visit:- http://www.tradusway.com/plumbing.html/
About Plumbing Tools
Plumbing Tools
Plumbing tools help you clean drains, cut, bend and repair pipes, and install new equipment quickly and easily. A pipe cutter can slice through metal and PVC quickly and is available in several styles that can cut pipe up to 6 inches in diameter. A pipe wrench can remove or install piping under sinks, tubs and water heaters efficiently and comes in many models. A flaring tool will flare and swag steel, copper, brass and aluminum pipe up to + inches. A great selection of piping and tubing tools to suit every type of plumbing challenge.
Plumbing is any system that conveys fluids for a wide range of applications. Heating and cooling, waste removal, and potable water delivery are among the most common uses for plumbing however plumbing's not limited to these applications. Plumbing utilizes pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids.
More visit:- http://www.tradusway.com/hand-tools/plumbing-tools.html/
Fitting shop
The document discusses tools used in a fitting shop. It describes various measuring tools like calipers and micrometers used to measure dimensions accurately. Marking and layout tools like scriber, center punch and surface plate are used for marking out on workpieces. Holding tools like vices and clamps are used to securely hold workpieces during operations. Cutting tools include files for shaping, hacksaws for cutting, drills for making holes and taps and dies for cutting threads. Measuring, layout, holding, cutting and other operations are performed in the fitting shop to complete projects to the required accuracy and specifications.
WHIRLPOWER automotiva
This document provides information on various automotive tools including bench vises, grease guns, sockets, wrenches, and specialty tools for working under vehicles. It lists specific tools by product code and provides details on each tool such as materials, sizes, and intended applications. Overall, the document showcases a wide selection of tools for automotive repair and maintenance.
Kit Lists for FOR
This document lists the contents of various construction kits including a general kit, framing kit, PPE kit, drywall kit, insulation kit, mudding kit, door and trim kit, paint kit, and cleaning kit. It provides the quantity and name of each item included in the kits. Site specific items are also noted that may vary depending on the type of framing, materials used, and other project factors.
Similar to Automotive tools.ppt (20)
IDENTIFICATION AND APPLICATION OF CUTTING TOOLS FOR MILLING.pptx
IDENTIFICATION AND APPLICATION OF CUTTING TOOLS FOR MILLING.pptx
Recently uploaded
MODULE ONE PRPC19 Design of Machine Elements- 1 .pdf
MODULE ONE PRPC19 Design of Machine Elements- 1 .pdf
Catalytic Converter theft prevention - NYC.pptx
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
学校原件一模一样【微信：741003700 】《(Exeter毕业证书)埃克塞特大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
AadiShakti Projects ( Asp Cranes ) Raipur
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker Jamieson
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Here's Why Every Semi-Truck Should Have ELDs
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
原版制作(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书一模一样
学校原件一模一样【微信：741003700 】《(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一模一样【微信：176555708】【(WashU文凭证书)圣路易斯华盛顿大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(napier毕业证书)英国龙比亚大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
EV Charging at Multifamily Properties by Kevin Donnelly
Kevin Donnelly gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
一比一原版(Columbia文凭证书)哥伦比亚大学毕业证如何办理
一模一样【微信：176555708】【(Columbia文凭证书)哥伦比亚大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Recently uploaded (20)
MODULE ONE PRPC19 Design of Machine Elements- 1 .pdf
MODULE ONE PRPC19 Design of Machine Elements- 1 .pdf
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
RACI Matrix Managed Services on Cloud 08-11-19_AS.pdf
RACI Matrix Managed Services on Cloud 08-11-19_AS.pdf
EV Charging at MFH Properties by Whitaker Jamieson
EV Charging at MFH Properties by Whitaker Jamieson
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing.pptx
EV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at Multifamily Properties by Kevin Donnelly
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
Automotive tools.ppt
- 1. 1 AUTOMOTIVE TOOLS Hand tools Measuring tools Cutting tools Power tools Lifting equipment Cleaning equipment Specialty tools
- 2. 2 HAND TOOLS Screwdrivers Pliers Hammers Wrenches Socket wrench sets Special tools
- 3. 3 Screwdrivers Phillips Flat Blades Torx Select screwdriver blade to match the size of the screw head.
- 5. 5 Pliers
- 6. 6 Specialty Pliers Battery pliers Hose clamp Grease cup Tin snips Many other types
- 7. 7 Hammers 1.Ball peen hammer 2. Engineers hammer 3. Soft faced 4. Rubber mallet 5. Dead blow 6. Brass 7. Leather
- 8. 8 Hammers
- 9. 9 Hammers
- 10. 10 Wrenches Open ends Box end
- 11. 11 Wrenches
- 12. 12 Wrenches
- 13. 13 Other Types of Wrenches Adjustable end wrench (Crescent wrench) Open end-box
- 14. 14 More Wrenches Flare nut wrenches Tubing wrenches Line wrenches Distributor wrench Alignment wrench Ratcheting box wrench Curved wrench
- 15. 15 Socket Wrenches Socket wrenches come in sets that are classified by their drive size. Three drive sizes are commonly used in the automotive trade. ¼”, 3/8”, ½” Ie: the size of the square
- 16. 16 Socket Wrench Drivers Ratchet Speeder Nut driver Breaker bar T-handle
- 17. 17 Sockets Hex size # of points on hex Deep & shallow sockets Drive size
- 18. 18 Specialty Sockets Impact & Standard Socket Impact sockets Spark plug sockets Universal sockets O2 sensor socket 4 & 8 point sockets
- 20. 20 Specialty Hand Tools Magnet, Pick-up tool, Valve lifter tool, oil filter wrench, brake Spoon, ring expander, mirror tool. Ring compressor, Pullers: damper, slide bar, pitman arm, wheel and battery terminal.
- 21. 21 CUTTING TOOLS Hack saws Files Chisels Taps & Dies Drills Grinders Da Torch
- 22. 22 Hacksaws Use to saw through metal. Needs a special blade depending on thickness of metal. Blades come in 18, 24, or 32 teeth per inch.
- 23. 23 Files Files are used much like a saw. They only cut when you push. For removing small amounts of metal. Many types with funny names.
- 24. 24 Chisels Used with a hammer to cut cut through metal. Tends to be crude but is effective in certain situations.
- 25. 25 Threading Tools Cut threads Taps cut internal threads. Dies cut external threads. Used in automotive service to repair threads.
- 26. 26 Drills 3/8” drill the most common for general automotive work. Powered both electrically and pneumatically. Drill press available.
- 27. 27 Oxy-Acetylene Torch Compressed gas type torch using oxygen and acetylene. Flame over 4000 degrees F. Used to cut metal or heat nuts and bolts for easy removal.
- 28. 28 Grinding Equipment Pedestal Grinder Valve grinding equipment
- 29. 29 POWER TOOLS Pneumatic tools Hydraulic power tools Electrically powered tools
- 30. 30 LIFTING EQUIPMENT Bumper or tire jacks Floor jacks Frame contact hoist Alignment rack Axle safety stands
- 31. 31 CLEANING EQUIPMENT Solvent tank using mineral spirits. Immersion cleaner using very harsh chemicals. Steam cleaner. Sand blaster. Wire brushes & scrapers.
- 32. 32 Solvent Tank Uses mineral spirits as a solvent. Used on oily and greasy parts. Use gloves for the solvent is harsh on skin. Don’t put any other fluids in the tank.
- 33. 33 Immersion Cleaner Very harsh solvent. Clean carburetor parts, pistons and other parts with burnt and varnish like deposits.
- 34. 34 MEASURING TOOLS Mechanical measuring tools Fluid measuring tools Electrical measuring tools