Automatic Hand Sanitizer Dispenser.pptx
•Download as PPTX, PDF•
0 likes•36 views
The document describes an automatic hand sanitizer dispenser that uses non-contact sensors and Arduino technology to dispense sanitizer without users having to touch the device. The system uses an ultrasonic sensor and Arduino microcontroller to detect hands and trigger a relay and pump motor to dispense sanitizer contactlessly. This aims to help limit the spread of viruses like COVID-19 by avoiding contact-based dispensing methods. A block diagram shows the key components including the Arduino, ultrasonic sensor, LCD display, relay, pump motor and power supply.
Report
Share
Report
Share
Recommended
Automatic Hand Sanitizer Dispenser -scd review.pptx
This document describes the design and implementation of an automatic hand sanitizer dispenser using an Arduino board. The dispenser uses an ultrasonic sensor to detect hands and dispenses sanitizer through a pump motor without the need for physical contact. It is designed to be low cost and help prevent the spread of diseases like COVID-19 by allowing contactless hand sanitization. The dispenser was tested and found to work accurately when hands were detected, dispensing sanitizer for the programmed duration. It has various applications in places like hospitals, schools, and offices to encourage regular sanitization.
Surgical Hand Scrub.pptx
This document provides guidelines for surgical hand scrub at Intermed Hospital. It defines surgical scrub as removing bacteria from hands and forearms through mechanical scrubbing with soap and brush. The individual performing surgery is the primary source of bacteria. Handwashing and surgical scrub reduce pathogen carriage. The new protocol recommends a 3-minute scrub with sponge instead of 5 minutes with brush to prevent skin damage. It also recommends using alcohol-based hand sanitizers like Avagard which do not require pre-wash or towels. The document outlines steps for proper water-based scrub and Avagard application.
Smart Hand Sanitizer Dispenser
This document summarizes a conference paper about designing a smart hand sanitizer dispenser. It discusses problems with current manual dispensers being contaminated and uncontrolled usage. The proposed solution uses a Raspberry Pi, camera, ultrasonic sensor and PIR sensor to dispense optimal amounts of sanitizer based on palm image processing and provide monitoring via Node-RED. It dispenses different volumes for small, medium and large hands classified by palm size. The system aims to control hand sanitizer costs by dispensing precise amounts and alerts owners when refills are needed. Testing showed 98.1% accuracy in measuring dispensed volumes. The overall goal is to provide an affordable and automated sanitizing solution to help curb virus spread.
Hand wash 1.ppt
Hand hygiene involves cleaning one's hands and is the most effective way to reduce disease transmission. There are various terms used to describe hand hygiene methods including handwashing, antiseptic handwash, and surgical hand antisepsis. Proper hand hygiene techniques should be followed, such as using soap and water for 30 seconds and drying hands thoroughly. Hand hygiene helps prevent infection and avoids disease transmission between individuals.
Thesis Title Proposal.pptx
An automated sanitation room is proposed to disinfect shoes through a contactless system using ultrasonic sensors, spray pumps, and a disinfectant tank. This aims to reduce virus transmission by sanitizing shoes in an efficient and cost-effective manner. The system would help maintain a safe environment for educational institutions and offices during the COVID-19 pandemic by providing automated disinfection that replaces human effort.
Surgical hand scrub_protocol_updates
The document summarizes updates to Vanderbilt's surgical hand scrub protocol. It reviews guidelines from AORN and CDC, which recommend scrub times of 3-4 minutes. The new Vanderbilt protocol specifies a 3-minute scrub time using either a water-based scrub or Avagard. For water-based scrubs, nurses should use the brush only on nails/cuticles or soiled areas. For Avagard, nurses should wash hands and nails before applying the product per the manufacturer's instructions.
Nappy Bin.pdf
The only thing worse than having no privacy is not being able to get rid of your tampons. This innovative and practical Nappy bin is designed to make it easy to dispose of used feminine hygiene products. Please note that this unit is only suitable for the disposal of sanitary towels and pantiliners. Due to its size and shape it cannot be used for adult incontinence products. It helps reduce waste and keeping the surroundings clean.
1BM20CS062_JAISHANKARKS_PPT.pptx
The research problem of this project is the hand sanitizer dispenser mostly provided in manual dispenser.
This will make the hand sanitizer dispenser to be contaminated.
The usage of the hand sanitizer also controlled by the individual behaviors.
Recommended
Automatic Hand Sanitizer Dispenser -scd review.pptx
This document describes the design and implementation of an automatic hand sanitizer dispenser using an Arduino board. The dispenser uses an ultrasonic sensor to detect hands and dispenses sanitizer through a pump motor without the need for physical contact. It is designed to be low cost and help prevent the spread of diseases like COVID-19 by allowing contactless hand sanitization. The dispenser was tested and found to work accurately when hands were detected, dispensing sanitizer for the programmed duration. It has various applications in places like hospitals, schools, and offices to encourage regular sanitization.
Surgical Hand Scrub.pptx
This document provides guidelines for surgical hand scrub at Intermed Hospital. It defines surgical scrub as removing bacteria from hands and forearms through mechanical scrubbing with soap and brush. The individual performing surgery is the primary source of bacteria. Handwashing and surgical scrub reduce pathogen carriage. The new protocol recommends a 3-minute scrub with sponge instead of 5 minutes with brush to prevent skin damage. It also recommends using alcohol-based hand sanitizers like Avagard which do not require pre-wash or towels. The document outlines steps for proper water-based scrub and Avagard application.
Smart Hand Sanitizer Dispenser
This document summarizes a conference paper about designing a smart hand sanitizer dispenser. It discusses problems with current manual dispensers being contaminated and uncontrolled usage. The proposed solution uses a Raspberry Pi, camera, ultrasonic sensor and PIR sensor to dispense optimal amounts of sanitizer based on palm image processing and provide monitoring via Node-RED. It dispenses different volumes for small, medium and large hands classified by palm size. The system aims to control hand sanitizer costs by dispensing precise amounts and alerts owners when refills are needed. Testing showed 98.1% accuracy in measuring dispensed volumes. The overall goal is to provide an affordable and automated sanitizing solution to help curb virus spread.
Hand wash 1.ppt
Hand hygiene involves cleaning one's hands and is the most effective way to reduce disease transmission. There are various terms used to describe hand hygiene methods including handwashing, antiseptic handwash, and surgical hand antisepsis. Proper hand hygiene techniques should be followed, such as using soap and water for 30 seconds and drying hands thoroughly. Hand hygiene helps prevent infection and avoids disease transmission between individuals.
Thesis Title Proposal.pptx
An automated sanitation room is proposed to disinfect shoes through a contactless system using ultrasonic sensors, spray pumps, and a disinfectant tank. This aims to reduce virus transmission by sanitizing shoes in an efficient and cost-effective manner. The system would help maintain a safe environment for educational institutions and offices during the COVID-19 pandemic by providing automated disinfection that replaces human effort.
Surgical hand scrub_protocol_updates
The document summarizes updates to Vanderbilt's surgical hand scrub protocol. It reviews guidelines from AORN and CDC, which recommend scrub times of 3-4 minutes. The new Vanderbilt protocol specifies a 3-minute scrub time using either a water-based scrub or Avagard. For water-based scrubs, nurses should use the brush only on nails/cuticles or soiled areas. For Avagard, nurses should wash hands and nails before applying the product per the manufacturer's instructions.
Nappy Bin.pdf
The only thing worse than having no privacy is not being able to get rid of your tampons. This innovative and practical Nappy bin is designed to make it easy to dispose of used feminine hygiene products. Please note that this unit is only suitable for the disposal of sanitary towels and pantiliners. Due to its size and shape it cannot be used for adult incontinence products. It helps reduce waste and keeping the surroundings clean.
1BM20CS062_JAISHANKARKS_PPT.pptx
The research problem of this project is the hand sanitizer dispenser mostly provided in manual dispenser.
This will make the hand sanitizer dispenser to be contaminated.
The usage of the hand sanitizer also controlled by the individual behaviors.
Automatic Hand Sanitizer Using Ultrasonic Sensor
This document describes a proposed automatic hand sanitizer system that uses mist and UV light for improved efficiency and safety. The system uses an Arduino microcontroller connected to an ultrasonic sensor, mist maker, UV lamp, LCD display, buzzer and timer buttons. When hands are detected by the sensor, the mist maker and UV lamp are activated for the set timer period. A buzzer alerts the user if they remove their hands early. This fog-based system uses 95% less sanitizer and the UV light provides additional disinfection for improved safety over liquid-based systems.
Standard work precautions , nsi, ppe
This document provides guidelines and information on standard precautions for healthcare workers, including definitions, recommendations for hand hygiene and use of personal protective equipment, sharps safety, and procedures for exposure to bloodborne pathogens and needlestick injuries. It discusses the risks of different bodily fluids, management of exposures, and post-exposure prophylaxis guidelines for hepatitis B, hepatitis C, and HIV.
Hand Hygeine Symposia - The CRUDEM Foundation
Hand hygiene, specifically cleaning hands before touching patients, is the most important way to prevent the spread of infections in healthcare settings. The WHO recommends cleaning hands at 5 key moments: before touching a patient, before clean procedures, after body fluid exposure, after touching a patient, and after contact with surfaces near the patient. Alcohol-based handrubs are more effective at killing germs than soap and water, take less time, and are less damaging to skin. Proper hand hygiene, including using alcohol-based handrubs, can significantly reduce healthcare-associated infections.
Automated hand sanitizer despenser
This document outlines a project to develop an automated hand sanitizer device and non-contact temperature detection system for supermarket entrances. The system aims to provide touchless sanitization and temperature checks while monitoring sanitizer levels and quality. It will be developed over 3 months using components like a liquid pump, proximity sensor, and temperature sensor. The device will be tested for accuracy of temperature readings, sanitization timing, liquid level detection, and ignition detection before finalizing. The system is intended to improve hygiene and health protections while reducing employee workload during the COVID-19 pandemic.
smart service dustbin with IOT in embedded systems.pptx
The document describes a smart trash bin prototype designed for hospitals. The prototype uses ultrasonic sensors and a servo motor to automatically open the lid when a person is detected and close after use. This limits the spread of diseases by reducing direct contact with the bin. It also saves time by eliminating the need to manually open the lid and makes it easier to know when the bin is full. The prototype was tested and validated, demonstrating its ability to improve waste management efficiency and hygiene.
Hand Hygiene Presentation for February 2004 Veterans Health Administration "Q...
This presentation made clear the VHA policy to implement the CDC hand Hygiene Guideline a year before the VHA Directive was issued. A special memo and summary had been sent to VA Network Offices and Medical Center Directors from the Under Secretary for Health (Dr. Roswell). Will post the "TIPS" issue mentioned in slides. Memo has probably been lost in the mists of time. I have a video of this presentation (because it was broadcast on the VA's internal education system) on VHS and someday may get it on YouTube...
Door county memorial hand washing made easy.ppt 2012
The document discusses guidelines for proper hand hygiene for healthcare providers. It recommends a comprehensive approach using soap and water along with alcohol-based hand rubs. Healthcare providers should wash their hands before and after patient contact, before aseptic procedures, and after potential exposure to bodily fluids. Artificial nails can harbor more pathogens and make handwashing less effective. A blended approach of traditional handwashing and alcohol-based products is suggested. Hand hygiene is important even when gloves are worn to prevent the spread of microbes.
Advert ideas portfolio (by Wu Songjun Vivian)
The document contains six advertising ideas for different clients and target audiences. Idea 1 proposes an automated voting system for elections in Singapore using fingerprint recognition and cameras. Idea 2 suggests a giant outdoor selfie booth in Singapore that provides free high-definition passport photos through a mobile app. Idea 3 is a YouTube video campaign to raise awareness of a new mosquito trap that kills malaria-carrying mosquitoes.
lesson plan on handwashing.pdf
Wet your hands with clean, running water (warm or cold), turn off the tap, and apply soap. Lather your hands by rubbing them together with the soap. Lather the backs of your hands, between your fingers, and under your nails. Scrub your hands for at least 20 seconds.
Using of face mask and sanitizer benefits and risks during cov id-19
The document discusses the benefits of face masks and hand sanitizers in preventing the spread of COVID-19. It explains that face masks act as a barrier to respiratory droplets that carry the virus, while hand sanitizers can inactivate the virus if they contain at least 60% alcohol. However, improper use of masks and sanitizers can increase risks. The document provides guidelines for proper use and precautions to stay safe.
How to Start Using Automatic Soap and Sanitizer Dispenser.pdf
With the growing need for safe hygiene during this global epidemic, restroom sanitation is a rising concern for numerous. Especially since proper handwashing has been cited as an important practice to help COVID- 19.
Effectiveness of hand washing
This document discusses the effectiveness of hand washing in reducing bacterial contamination. It begins by discussing the historical discovery of hand washing in disease prevention. It then describes an experiment where fluorescent dye is used to show that proper hand washing with soap for 20 seconds reduces bacteria on the hands, as seen under UV light. The document outlines a procedure where agar plates are used to culture bacteria from fingertips that are unwashed, washed with water only, washed with soap and water, and sanitized. It demonstrates that washing with soap and water for 40 seconds or more is most effective at reducing bacterial growth.
Medical mirror
The document describes the Medical Mirror, an invention by Ming-Zher Poh at MIT in 2009. The Medical Mirror uses a webcam and two-way mirror installed in a frame to non-invasively measure a person's heart rate when they look at their reflection. It works by detecting subtle light absorption changes caused by blood flow with each heartbeat. The mirror provides real-time heart rate readings and has advantages over traditional sensors by being contact-free and fitting seamlessly into the home environment to conveniently track health. Future work aims to expand its physiological monitoring capabilities.
hand hygiene-1.pptx
This document discusses hand hygiene for healthcare workers. It defines different types of hand hygiene including handwashing, antiseptic hand wash, alcohol-based hand rub, and surgical hand hygiene. It recommends cleaning hands with soap and water when visibly soiled and using alcohol-based hand rub when hands are not soiled. Hand hygiene should be performed before and after contact with patients, after contact with body fluids, and before and after using the toilet. Alcohol-based hand rubs are more effective and convenient than handwashing with soap for reducing bacteria on hands. Proper hand hygiene is important for preventing transmission of pathogens and antibiotic resistance in healthcare settings.
Winners of 2016 SXSW Health & MedTech
Digital health was a big topic of discussion at the 2016 SXSW Interactive Festival in Austin, Texas. This presentation lists the companies and individuals awarded at SXSW for their innovative ideas in the health care industry. From wearable technology to 3D printing and more, readers will learn how technology is being used to serve today's health care environment.
How to remove mpc cleaner
MPC CLEANER categorized as adware which enters into the system of user silently after visiting some malicious sites. It is created by cyber criminals and after entering into the system, it displays lots of unwanted pop-up ads. This adware is dreadfully perilous for your computer as it attaches to your web browsers and show numerous such ads and pop-ups messages that lead you to precarious websites.
Siot powerpoint
Technology and medical advances will help improve human health and longevity. Three examples discussed are microchip medicine which can deliver precise doses of medications over time, a robotic "cancer crab" that can remove stomach cancer through small incisions, and a Microsoft contact lens that aims to non-invasively monitor blood sugar levels in diabetes patients. While not yet ready for widespread use, these technologies have the potential to revolutionize healthcare, improve quality of life, and prolong lifespans.
Twister
An interactive application that enhances the mental strength of user so that they are prepared for difficulties
More Related Content
Similar to Automatic Hand Sanitizer Dispenser.pptx
Automatic Hand Sanitizer Using Ultrasonic Sensor
This document describes a proposed automatic hand sanitizer system that uses mist and UV light for improved efficiency and safety. The system uses an Arduino microcontroller connected to an ultrasonic sensor, mist maker, UV lamp, LCD display, buzzer and timer buttons. When hands are detected by the sensor, the mist maker and UV lamp are activated for the set timer period. A buzzer alerts the user if they remove their hands early. This fog-based system uses 95% less sanitizer and the UV light provides additional disinfection for improved safety over liquid-based systems.
Standard work precautions , nsi, ppe
This document provides guidelines and information on standard precautions for healthcare workers, including definitions, recommendations for hand hygiene and use of personal protective equipment, sharps safety, and procedures for exposure to bloodborne pathogens and needlestick injuries. It discusses the risks of different bodily fluids, management of exposures, and post-exposure prophylaxis guidelines for hepatitis B, hepatitis C, and HIV.
Hand Hygeine Symposia - The CRUDEM Foundation
Hand hygiene, specifically cleaning hands before touching patients, is the most important way to prevent the spread of infections in healthcare settings. The WHO recommends cleaning hands at 5 key moments: before touching a patient, before clean procedures, after body fluid exposure, after touching a patient, and after contact with surfaces near the patient. Alcohol-based handrubs are more effective at killing germs than soap and water, take less time, and are less damaging to skin. Proper hand hygiene, including using alcohol-based handrubs, can significantly reduce healthcare-associated infections.
Automated hand sanitizer despenser
This document outlines a project to develop an automated hand sanitizer device and non-contact temperature detection system for supermarket entrances. The system aims to provide touchless sanitization and temperature checks while monitoring sanitizer levels and quality. It will be developed over 3 months using components like a liquid pump, proximity sensor, and temperature sensor. The device will be tested for accuracy of temperature readings, sanitization timing, liquid level detection, and ignition detection before finalizing. The system is intended to improve hygiene and health protections while reducing employee workload during the COVID-19 pandemic.
smart service dustbin with IOT in embedded systems.pptx
The document describes a smart trash bin prototype designed for hospitals. The prototype uses ultrasonic sensors and a servo motor to automatically open the lid when a person is detected and close after use. This limits the spread of diseases by reducing direct contact with the bin. It also saves time by eliminating the need to manually open the lid and makes it easier to know when the bin is full. The prototype was tested and validated, demonstrating its ability to improve waste management efficiency and hygiene.
Hand Hygiene Presentation for February 2004 Veterans Health Administration "Q...
This presentation made clear the VHA policy to implement the CDC hand Hygiene Guideline a year before the VHA Directive was issued. A special memo and summary had been sent to VA Network Offices and Medical Center Directors from the Under Secretary for Health (Dr. Roswell). Will post the "TIPS" issue mentioned in slides. Memo has probably been lost in the mists of time. I have a video of this presentation (because it was broadcast on the VA's internal education system) on VHS and someday may get it on YouTube...
Door county memorial hand washing made easy.ppt 2012
The document discusses guidelines for proper hand hygiene for healthcare providers. It recommends a comprehensive approach using soap and water along with alcohol-based hand rubs. Healthcare providers should wash their hands before and after patient contact, before aseptic procedures, and after potential exposure to bodily fluids. Artificial nails can harbor more pathogens and make handwashing less effective. A blended approach of traditional handwashing and alcohol-based products is suggested. Hand hygiene is important even when gloves are worn to prevent the spread of microbes.
Advert ideas portfolio (by Wu Songjun Vivian)
The document contains six advertising ideas for different clients and target audiences. Idea 1 proposes an automated voting system for elections in Singapore using fingerprint recognition and cameras. Idea 2 suggests a giant outdoor selfie booth in Singapore that provides free high-definition passport photos through a mobile app. Idea 3 is a YouTube video campaign to raise awareness of a new mosquito trap that kills malaria-carrying mosquitoes.
lesson plan on handwashing.pdf
Wet your hands with clean, running water (warm or cold), turn off the tap, and apply soap. Lather your hands by rubbing them together with the soap. Lather the backs of your hands, between your fingers, and under your nails. Scrub your hands for at least 20 seconds.
Using of face mask and sanitizer benefits and risks during cov id-19
The document discusses the benefits of face masks and hand sanitizers in preventing the spread of COVID-19. It explains that face masks act as a barrier to respiratory droplets that carry the virus, while hand sanitizers can inactivate the virus if they contain at least 60% alcohol. However, improper use of masks and sanitizers can increase risks. The document provides guidelines for proper use and precautions to stay safe.
How to Start Using Automatic Soap and Sanitizer Dispenser.pdf
With the growing need for safe hygiene during this global epidemic, restroom sanitation is a rising concern for numerous. Especially since proper handwashing has been cited as an important practice to help COVID- 19.
Effectiveness of hand washing
This document discusses the effectiveness of hand washing in reducing bacterial contamination. It begins by discussing the historical discovery of hand washing in disease prevention. It then describes an experiment where fluorescent dye is used to show that proper hand washing with soap for 20 seconds reduces bacteria on the hands, as seen under UV light. The document outlines a procedure where agar plates are used to culture bacteria from fingertips that are unwashed, washed with water only, washed with soap and water, and sanitized. It demonstrates that washing with soap and water for 40 seconds or more is most effective at reducing bacterial growth.
Medical mirror
The document describes the Medical Mirror, an invention by Ming-Zher Poh at MIT in 2009. The Medical Mirror uses a webcam and two-way mirror installed in a frame to non-invasively measure a person's heart rate when they look at their reflection. It works by detecting subtle light absorption changes caused by blood flow with each heartbeat. The mirror provides real-time heart rate readings and has advantages over traditional sensors by being contact-free and fitting seamlessly into the home environment to conveniently track health. Future work aims to expand its physiological monitoring capabilities.
hand hygiene-1.pptx
This document discusses hand hygiene for healthcare workers. It defines different types of hand hygiene including handwashing, antiseptic hand wash, alcohol-based hand rub, and surgical hand hygiene. It recommends cleaning hands with soap and water when visibly soiled and using alcohol-based hand rub when hands are not soiled. Hand hygiene should be performed before and after contact with patients, after contact with body fluids, and before and after using the toilet. Alcohol-based hand rubs are more effective and convenient than handwashing with soap for reducing bacteria on hands. Proper hand hygiene is important for preventing transmission of pathogens and antibiotic resistance in healthcare settings.
Winners of 2016 SXSW Health & MedTech
Digital health was a big topic of discussion at the 2016 SXSW Interactive Festival in Austin, Texas. This presentation lists the companies and individuals awarded at SXSW for their innovative ideas in the health care industry. From wearable technology to 3D printing and more, readers will learn how technology is being used to serve today's health care environment.
How to remove mpc cleaner
MPC CLEANER categorized as adware which enters into the system of user silently after visiting some malicious sites. It is created by cyber criminals and after entering into the system, it displays lots of unwanted pop-up ads. This adware is dreadfully perilous for your computer as it attaches to your web browsers and show numerous such ads and pop-ups messages that lead you to precarious websites.
Siot powerpoint
Technology and medical advances will help improve human health and longevity. Three examples discussed are microchip medicine which can deliver precise doses of medications over time, a robotic "cancer crab" that can remove stomach cancer through small incisions, and a Microsoft contact lens that aims to non-invasively monitor blood sugar levels in diabetes patients. While not yet ready for widespread use, these technologies have the potential to revolutionize healthcare, improve quality of life, and prolong lifespans.
Twister
An interactive application that enhances the mental strength of user so that they are prepared for difficulties
Similar to Automatic Hand Sanitizer Dispenser.pptx (18)
smart service dustbin with IOT in embedded systems.pptx
smart service dustbin with IOT in embedded systems.pptx
Hand Hygiene Presentation for February 2004 Veterans Health Administration "Q...
Hand Hygiene Presentation for February 2004 Veterans Health Administration "Q...
Door county memorial hand washing made easy.ppt 2012
Door county memorial hand washing made easy.ppt 2012
Using of face mask and sanitizer benefits and risks during cov id-19
Using of face mask and sanitizer benefits and risks during cov id-19
How to Start Using Automatic Soap and Sanitizer Dispenser.pdf
How to Start Using Automatic Soap and Sanitizer Dispenser.pdf
More from Hamed Raza
railway gate using arduino uno and servo motors
The document describes an automatic railway gate control system that uses sensors to detect approaching and departing trains. When a train is detected approaching, the system calculates the time needed for the train to reach the road and then closes the gate/barrier accordingly. Another sensor detects when the train departs and then the gate/barrier is restored to its initial open position. This automatic system aims to avoid human errors and improve efficiency compared to manual railway crossing systems.
patient monitoring using iot and heart beat sensor
This document describes a remote patient monitoring system that uses a heartbeat sensor, temperature sensor, and microcontroller to monitor a patient's heart rate and temperature. It sends alerts if the heart rate goes above or below set limits to doctors and concerned users. The system also displays the live heart rate for concerned individuals to monitor from anywhere. It interfaces the sensors to a microcontroller to check readings and transmit them over Wi-Fi and the internet using a modem. The system stores patient data on the cloud and can use GSM to locate patients during emergencies. Benefits include improved engagement, continuous monitoring, essential services at low cost, while drawbacks include costs, adoption challenges, and security/privacy risks.
Automatic Head Light Intensity control for avoid accidents at night times..pptx
This document describes a proposed system for automatic headlight intensity control to avoid accidents. The system uses an LDR sensor and ultrasonic sensor along with a microcontroller to automatically adjust the headlight intensity based on surrounding light levels and detected objects. When the LDR sensor detects a high intensity of light and the ultrasonic sensor detects an object, the headlights will be dimmed to the low beam setting to prevent glare. If darkness is detected but no object is present, the headlights will remain on high beam. The system aims to prevent accidents caused by glare from opposing vehicles' headlights during night driving.
irrigationsystem using wind energy and water lifting
This document describes a wind-powered automatic irrigation system that uses a wind dynamo to generate electricity from wind energy. This electricity powers a pump that pumps water from a bore well to a storage tank. A soil moisture sensor then senses the moisture level in the soil and controls a motor that regulates the flow of water from the tank to the irrigation field, optimizing water usage. The system provides a sustainable alternative energy source for irrigation after an initial investment and requires minimal ongoing maintenance or manual operation.
metal detector for security applications
This document summarizes the development of a metal detector robot. It describes building a metal detector using a pulse induction detector without metal discrimination. Obstacle avoidance algorithms were implemented using an Arduino UNO. The document discusses different types of metal detectors including beat frequency oscillation, very low frequency, and pulse induction detectors. It outlines the assembly process for integrating the metal detector circuit onto a robot and describes troubleshooting a first circuit that did not work efficiently. Potential applications of the metal detector robot include security, search and rescue, and treasure hunting. The document proposes future work integrating a wireless camera system and obstacle sensors.
radar simulation using ultrasonic sensor
The ultrasonic RADAR uses an Arduino UNO, ultrasonic sensor, servo motor, and 16x2 LCD to display the polar coordinates of detected objects. The ultrasonic sensor measures distance by emitting ultrasonic soundwaves and measuring the reflection time, while the servo motor rotates 180 degrees clockwise and counterclockwise to measure the angle. The Arduino calculates the distances and angles and displays them on the LCD.
ar designs services introduction for demonstration
This presentation discusses embedded system and Internet of Things projects. It introduces various components that can be used such as Android, Bluetooth, GPS, WiFi, Zigbee, Ethernet, RF, RFID, sensors to measure temperature, humidity, fire, smoke, and alcohol levels. Examples of projects include speech processing and robotics. The presentation emphasizes that hardware is controlled by software running on a microcontroller that is preprogrammed to perform specific functions.
industrial plant monitoring with all sensors paraments
1. This document describes an IOT-based system for monitoring industrial parameters remotely.
2. The system uses various sensors to monitor parameters like temperature, gas levels, humidity, voltage and current. It also uses a voice module to provide voice alerts to workers.
3. Data from the sensors is sent to a server in real-time to allow remote monitoring and control of industrial automation processes and parameters from an Android app. This reduces the need for manual monitoring and control.
vehicle tracking using gsm and gps with arduino and lcd
This document outlines a GPS and GSM-based vehicle tracking system that provides real-time location information. The system uses GPS to obtain location coordinates and sends them via GSM to a caretaker. It consists of an onboard module in the vehicle with an ARM processor, GPS receiver, and GSM transmitter. The GPS receiver receives location coordinates from satellites and sends them to the ARM controller, which then transmits the data to the caretaker using the GSM module. If an accident occurs, the controller will also activate a buzzer. The system provides accurate, real-time vehicle tracking at a low cost and with minimal power consumption.
pond cleaning using wifi based android app
This document proposes a "Pond Cleaning Robot" to address the problem of water pollution in lakes and ponds in India. It describes the hardware and software requirements for a robot that can remove waste debris from water surfaces using a cleaner mechanism. The robot works automatically to extract garbage and plastics from lakes in order to reduce pollution and protect aquatic life, while minimizing human labor. It is presented as an eco-friendly and low-cost solution.
Bill-Prediction-Power-Factor-Measuring-With-SMS-Alert.pptx
The document discusses the ATmega16 microcontroller which has 40 pins including 32 I/O lines divided into 8 ports and various built-in peripherals. It also mentions LCDs can display arbitrary or fixed images and current sensors measure current through a device or circuit and generate a proportional output voltage signal. Finally, it discusses using a relay to switch on a load and references a project on bill prediction and power factor measuring with SMS alerts.
child safety monitoring using gps and iot
The document describes a proposed child safety wearable device that uses SMS communication between a parent's phone and the device to track a child's location, temperature, UV exposure and alerts. The device includes a GSM module to send SMS messages, a GPS sensor and temperature, UV and SOS light sensors. When the parent texts keywords like "location" to the device, it responds with the child's location from the GPS. This allows easy tracking of a lost child in crowded areas.
blind stick using ultrasonic sensor and alarm
This document describes the design of an ultrasonic navigation system to assist blind people. The system uses a microcontroller and various sensors including ultrasonic, IR, water, fire, and light sensors. The ultrasonic sensor detects obstacles and alerts the user with vibrations. Other sensors detect hazards like pits, stairs, water, and fire. The microcontroller interfaces with the sensors and activates output devices like a buzzer or vibrator when hazards are detected. The system is intended to make navigation safer and more secure for blind users by providing alerts through dual feedback mechanisms. Future improvements could include using GPS and voice guidance to provide global positioning information.
More from Hamed Raza (20)
career guidance using ml and python for college students projects
career guidance using ml and python for college students projects
INTELLIGENT STUDENTS TRACKING SYSTEM IN CAMPUS RF.pptx
INTELLIGENT STUDENTS TRACKING SYSTEM IN CAMPUS RF.pptx
home automation ppt using google assistant and wifi
home automation ppt using google assistant and wifi
patient monitoring using iot and heart beat sensor
patient monitoring using iot and heart beat sensor
Automatic Head Light Intensity control for avoid accidents at night times..pptx
Automatic Head Light Intensity control for avoid accidents at night times..pptx
irrigationsystem using wind energy and water lifting
irrigationsystem using wind energy and water lifting
ar designs services introduction for demonstration
ar designs services introduction for demonstration
industrial plant monitoring with all sensors paraments
industrial plant monitoring with all sensors paraments
vehicle tracking using gsm and gps with arduino and lcd
vehicle tracking using gsm and gps with arduino and lcd
Bill-Prediction-Power-Factor-Measuring-With-SMS-Alert.pptx
Bill-Prediction-Power-Factor-Measuring-With-SMS-Alert.pptx
Recently uploaded
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Recently uploaded (20)
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Automatic Hand Sanitizer Dispenser.pptx
- 1. Automatic Hand Sanitizer Dispenser By:
- 2. Contents • Introduction • A)aim b)previous system c)proposed system • Block diagram • Individual blocks • Software requirements • Results • Advantages • Disadvantages • Applications • Conclusion • Future scope • References
- 3. Introduction • The corona disease is a major problem future world. • Presently there is no medicine or vaccine found in the resent world. • As there is a severe attack in this world, the people are suffering from the corona disease. • As there is an impact in using the hand wash sanitation by foot or by pressing the sanitizer bottle used to have a spread of the virus disease from one human to another • The Easy Non-Contact Automatic Hand Sanitizer Dispenser or Automatic Soap Dispenser with Arduino
- 4. Aim: • To design and develop an automated hand sanitizer dispensing machine which work on non contact, alcohol based dispensing solution to kill corona virus.
- 5. Previous sytem • In previous system contact based foot press was used to dispense the solution to clean hands
- 6. Proposed system To avoid contact based dispensing an Arduino based sensor system develop to make hand sanitizer completely contactless
- 7. Block diagram Arduino uno Ultrasonic sensor Reset LCD Relay Pump motor Regulated power supply
- 9. LCD Display A 16x2 LCD display is very basic module and is very commonly used in various devices and circuits. A 16x2 LCD means it can display 16 characters per line and there are 2 such lines.