atmospheric water generator by Priya gavshindegavshinde
This will convert humidity present in the air into the water.It works on principle of condensation,Now, this technology is practically implemented at industrial level.Instead of some traditional techniques for same work.
There is abundant fresh water in the air according to
the test. Each cube air has 5qram fresh water when the
relative humidity is 50%.It can’t be used up and can fully
satisfy people’s request of drinking water.
The technology of taking out water from the air is used
for dealing with the drinking water problems of some
places where are short of fresh water or in water pollution.
An atmospheric water harvester or atmospheric water generator (AWG) is a electricity-powered device that uses the dehumidification principle to make drinking water out of the moisture in the air.
Approach of Reverse Osmosis technology. MerWaterDays conference in Merseburg (Ger).
A comprehensive conference about membrane tech and RO applications. Introducing Carbon Nano Tubes future technology.
SOLAR POWER VAPOUR ABSORPTION REFRIGERATION SYSTEMaj12345ay
USE OF SOLAR POWER IN REFRIGERATION SYSTEM
The power incident from the sun to the earth has very much amount of energy that the present consumption rate of all the commercial and general uses. We utilize only 0.1% of total incident sun energy on the surface of earth. Thus solar energy can fulfill our present as well as future needs of energy. That is a reason it called renewable sources of energy. It is also environmental clean source of energy and available at whole part of world where people live. Using of solar energy in the field of refrigeration and air conditioning system it become very economical.
In our project we provide solar heat in generator for heating purpose of vapor compression refrigeration system.
For past few decades, energy has played a prominent role in the development of technology and economy. Energy has now become inevitable factor for production as well. The objective of this project is to develop an environment friendly vapour absorption system. Vapour absorption system uses heat energy, instead of mechanical energy as in vapour compression system, in order to change the condition of refrigerant required for the operation of the cycle. R 717(NH3) and water are used as working fluids in this system. The basic idea of this project is derived from the solar heating panel to obtain heat energy, instead of using any conventional source of heat energy. In this project various observations are done by varying operating conditions related to heat source, condenser, absorber and evaporator temperatures. The drawback of this system is that, it remains idle in the cloudy weather conditions.
COMPONENTS USED IN SOLAR POWERED AQUA-AMMONIA VAPOUR ABSORPTION SYSTEM
• ABSORBER
• PUMP
• HEAT EXCHANGER
• GENERATOR
• SOLAR PANEL
• CONDENSER
• EXPANSION VALVE
• EVAPORATOR
• DC BATTERY
• FAN
Design, fabrication & simulation of mixed mode solar dehydrator for date ...SAJID ALI RUK
The drying process is one of the oldest methods used to remove the moisture content from the natural product.
It is the simplest and economical method on a large scale drying because of cheaper cost as compared to drying machine.
But it is estimated that about 30-40 percent of the commodity is wasted due to insufficient post-harvest treatment.
If solar dryers are used to remove excess moisture from the product before storage, their quality during storage will not deteriorate and infestation of insects will be reduced
Similarly, large quantities of excess vegetables and fruits, which are now being wasted, could be solar-dried for use during the off-season in a controlled manner.
A project topic for First years Engineering students in Chemistry and environmental studies. It is suggested to perform the stated experiment separately and let me know if you have any problems! Hope it helps!
atmospheric water generator by Priya gavshindegavshinde
This will convert humidity present in the air into the water.It works on principle of condensation,Now, this technology is practically implemented at industrial level.Instead of some traditional techniques for same work.
There is abundant fresh water in the air according to
the test. Each cube air has 5qram fresh water when the
relative humidity is 50%.It can’t be used up and can fully
satisfy people’s request of drinking water.
The technology of taking out water from the air is used
for dealing with the drinking water problems of some
places where are short of fresh water or in water pollution.
An atmospheric water harvester or atmospheric water generator (AWG) is a electricity-powered device that uses the dehumidification principle to make drinking water out of the moisture in the air.
Approach of Reverse Osmosis technology. MerWaterDays conference in Merseburg (Ger).
A comprehensive conference about membrane tech and RO applications. Introducing Carbon Nano Tubes future technology.
SOLAR POWER VAPOUR ABSORPTION REFRIGERATION SYSTEMaj12345ay
USE OF SOLAR POWER IN REFRIGERATION SYSTEM
The power incident from the sun to the earth has very much amount of energy that the present consumption rate of all the commercial and general uses. We utilize only 0.1% of total incident sun energy on the surface of earth. Thus solar energy can fulfill our present as well as future needs of energy. That is a reason it called renewable sources of energy. It is also environmental clean source of energy and available at whole part of world where people live. Using of solar energy in the field of refrigeration and air conditioning system it become very economical.
In our project we provide solar heat in generator for heating purpose of vapor compression refrigeration system.
For past few decades, energy has played a prominent role in the development of technology and economy. Energy has now become inevitable factor for production as well. The objective of this project is to develop an environment friendly vapour absorption system. Vapour absorption system uses heat energy, instead of mechanical energy as in vapour compression system, in order to change the condition of refrigerant required for the operation of the cycle. R 717(NH3) and water are used as working fluids in this system. The basic idea of this project is derived from the solar heating panel to obtain heat energy, instead of using any conventional source of heat energy. In this project various observations are done by varying operating conditions related to heat source, condenser, absorber and evaporator temperatures. The drawback of this system is that, it remains idle in the cloudy weather conditions.
COMPONENTS USED IN SOLAR POWERED AQUA-AMMONIA VAPOUR ABSORPTION SYSTEM
• ABSORBER
• PUMP
• HEAT EXCHANGER
• GENERATOR
• SOLAR PANEL
• CONDENSER
• EXPANSION VALVE
• EVAPORATOR
• DC BATTERY
• FAN
Design, fabrication & simulation of mixed mode solar dehydrator for date ...SAJID ALI RUK
The drying process is one of the oldest methods used to remove the moisture content from the natural product.
It is the simplest and economical method on a large scale drying because of cheaper cost as compared to drying machine.
But it is estimated that about 30-40 percent of the commodity is wasted due to insufficient post-harvest treatment.
If solar dryers are used to remove excess moisture from the product before storage, their quality during storage will not deteriorate and infestation of insects will be reduced
Similarly, large quantities of excess vegetables and fruits, which are now being wasted, could be solar-dried for use during the off-season in a controlled manner.
A project topic for First years Engineering students in Chemistry and environmental studies. It is suggested to perform the stated experiment separately and let me know if you have any problems! Hope it helps!
Heat recovery ventilation is a means of energy conversation in buildings. Because of reducing ventilation exhaust air, can play a good role in the effectiveness of ventilation to reduce energy use. As building efficiency is improved with insulation and weather stripping, buildings are intentionally made more airtight, and consequently less ventilated. Since all buildings require a source of fresh air, the need for HRVs has become obvious.
It is the Short Description of the Vapor Absorption Cooling/ Refrigeration System.Contains Intro, Comparison of VCCS 7 VACS, Diagram, Advantages & Disadvantages & Applications of the System
Design And Development of Hybrid Solar Dryers For Domestic Applicationssangeetkhule
INTRODUCTION
COMMERCIAL ASPECT
LITERATURE REVIEW
OUTCOME OF LITERATURE REVIEW
METHODOLOGY
DESIGN
CAD MODEL & SIMULATION
CONCLUSION
REFERENCES
Solar energy is a primary renewable energy source with the potential to meet
several challenges faced by humankind. Solar technologies convert sunlight into
electrical energy either through photovoltaic (PV) panels or through mirrors that
concentrate solar radiation. There are two basic mechanisms involved in the drying
process of solar drying; are: The migration of moisture from the interior of the
substance to be dried, and the second is the evaporation of moisture from the surface to
the surrounding air. The solar drying system utilizes the solar energy to heat air and to
dry any food substance which is loaded, which is not only beneficial but also it reduces
wastage of agricultural products and helps in the preservation of agricultural products,
but it also makes transportation of such dried product quickly and promotes the health
and welfare of the people. So, the development of a hybrid solar-energy dryer using a
photovoltaic (PV) solar panel to power the heating element coil and charge the battery,
which had a storage energy system, was developed and constructed with readily
available materials market was proposed.
This report presents the basics of the solar dryer, and the Literature review
contains recent innovative techniques used for developments of different types like
direct, indirect, mixed-mode, and hybrid solar dryers are discussed from the duration of
the previous two to three decades. Also, a comprehensive report of the fundamental
principles governing the drying process with the classification of the practically realized
various designs and selection of solar dryers for drying agricultural and marine products
has been presented.
The dryer comprises a solar collector (air heater) with the baffles and a solar
drying chamber containing a rack of four net trays, both being assimilated together. The
air allowed in through the air inlet is heated up in the solar collector chamber andchannelled through the drying chamber, where it is utilized in drying (removing the
moisture content from the food substances or agricultural product loaded in it). Locally
materials were used for the construction are wood, glass, aluminium metal sheet, PV,
and net for the trays.
The hybrid solar dryer discussed in the papers in the literature review is a
prominent practical technology that can dry various crops under all weather conditions.
Temperatures in the drying cabinet can be expected to range between 40 to 70ºC.
Compared to traditional drying, the hybrid dryer produces a better quality product and
can reduce the drying time by up to 50 to 70 %.
“SEMINAR REPORT ON SOLAR ASSISTED VAPOUR ADSORPTION REFRIGERATION SYSTEM”Bhagvat Wadekar
SUMMARY
The range of COP for the Solar VAdRS is 0.2 - 0.7. The development of adsorption system for refrigeration is promising. An overall thermodynamics-based comparison of sorption systems shows that the performance of adsorption systems depends highly on both the adsorption pairs and processes. The technology continues to develop and the cost of producing power with solar thermal adsorption refrigeration is falling. If the costs of fossil fuels, transportation, energy conversion, electricity transmission and system maintenance are taken into account, the cost of energy produced by solar thermal adsorption systems would be much lower than that for conventional refrigeration systems.
The intermittent system has its simplicity and cost effectiveness. However, the main disadvantages such as long adsorption/desorption time have become obstacles for commercial production of the system. Hence, to compete with conventional vapor compression technologies, more efforts should be made in enhancing the COP and SCP. The environmental benefits of this technology and its non-dependence on conventional energy sources makes it highly attractive for further developments and a potential alternative to conventional systems in the future. The future of solar refrigeration and air conditioning seems to be a very good proposition and no doubt will find its place in future industrial applications. The major limiting factor at present is the shape of energy so as to make it available whenever it is required, for example at nights and extended cloudy days when we cannot attain a high enough temperature.
Design and Development of Combined system of air cooler and water chiller sys...SANJAY NEOLIA
The Combined system of air cooler and water chiller is developed for providing better cooling effect than the conventional air cooler. It also provides cold water for drinking purpose comparatively at low cost than refrigerator. It also decreased moisture content of the air coming through desert cooler upto some extent.
Heat recovery ventilation is a means of energy conversation in buildings. Because of reducing ventilation exhaust air, can play a good role in the effectiveness of ventilation to reduce energy use. As building efficiency is improved with insulation and weather stripping, buildings are intentionally made more airtight, and consequently less ventilated. Since all buildings require a source of fresh air, the need for HRVs has become obvious.
It is the Short Description of the Vapor Absorption Cooling/ Refrigeration System.Contains Intro, Comparison of VCCS 7 VACS, Diagram, Advantages & Disadvantages & Applications of the System
Design And Development of Hybrid Solar Dryers For Domestic Applicationssangeetkhule
INTRODUCTION
COMMERCIAL ASPECT
LITERATURE REVIEW
OUTCOME OF LITERATURE REVIEW
METHODOLOGY
DESIGN
CAD MODEL & SIMULATION
CONCLUSION
REFERENCES
Solar energy is a primary renewable energy source with the potential to meet
several challenges faced by humankind. Solar technologies convert sunlight into
electrical energy either through photovoltaic (PV) panels or through mirrors that
concentrate solar radiation. There are two basic mechanisms involved in the drying
process of solar drying; are: The migration of moisture from the interior of the
substance to be dried, and the second is the evaporation of moisture from the surface to
the surrounding air. The solar drying system utilizes the solar energy to heat air and to
dry any food substance which is loaded, which is not only beneficial but also it reduces
wastage of agricultural products and helps in the preservation of agricultural products,
but it also makes transportation of such dried product quickly and promotes the health
and welfare of the people. So, the development of a hybrid solar-energy dryer using a
photovoltaic (PV) solar panel to power the heating element coil and charge the battery,
which had a storage energy system, was developed and constructed with readily
available materials market was proposed.
This report presents the basics of the solar dryer, and the Literature review
contains recent innovative techniques used for developments of different types like
direct, indirect, mixed-mode, and hybrid solar dryers are discussed from the duration of
the previous two to three decades. Also, a comprehensive report of the fundamental
principles governing the drying process with the classification of the practically realized
various designs and selection of solar dryers for drying agricultural and marine products
has been presented.
The dryer comprises a solar collector (air heater) with the baffles and a solar
drying chamber containing a rack of four net trays, both being assimilated together. The
air allowed in through the air inlet is heated up in the solar collector chamber andchannelled through the drying chamber, where it is utilized in drying (removing the
moisture content from the food substances or agricultural product loaded in it). Locally
materials were used for the construction are wood, glass, aluminium metal sheet, PV,
and net for the trays.
The hybrid solar dryer discussed in the papers in the literature review is a
prominent practical technology that can dry various crops under all weather conditions.
Temperatures in the drying cabinet can be expected to range between 40 to 70ºC.
Compared to traditional drying, the hybrid dryer produces a better quality product and
can reduce the drying time by up to 50 to 70 %.
“SEMINAR REPORT ON SOLAR ASSISTED VAPOUR ADSORPTION REFRIGERATION SYSTEM”Bhagvat Wadekar
SUMMARY
The range of COP for the Solar VAdRS is 0.2 - 0.7. The development of adsorption system for refrigeration is promising. An overall thermodynamics-based comparison of sorption systems shows that the performance of adsorption systems depends highly on both the adsorption pairs and processes. The technology continues to develop and the cost of producing power with solar thermal adsorption refrigeration is falling. If the costs of fossil fuels, transportation, energy conversion, electricity transmission and system maintenance are taken into account, the cost of energy produced by solar thermal adsorption systems would be much lower than that for conventional refrigeration systems.
The intermittent system has its simplicity and cost effectiveness. However, the main disadvantages such as long adsorption/desorption time have become obstacles for commercial production of the system. Hence, to compete with conventional vapor compression technologies, more efforts should be made in enhancing the COP and SCP. The environmental benefits of this technology and its non-dependence on conventional energy sources makes it highly attractive for further developments and a potential alternative to conventional systems in the future. The future of solar refrigeration and air conditioning seems to be a very good proposition and no doubt will find its place in future industrial applications. The major limiting factor at present is the shape of energy so as to make it available whenever it is required, for example at nights and extended cloudy days when we cannot attain a high enough temperature.
Design and Development of Combined system of air cooler and water chiller sys...SANJAY NEOLIA
The Combined system of air cooler and water chiller is developed for providing better cooling effect than the conventional air cooler. It also provides cold water for drinking purpose comparatively at low cost than refrigerator. It also decreased moisture content of the air coming through desert cooler upto some extent.
RInine Engineering combines Creativity with Technology to transform Ideas into World class Products & Services. Rinine being a Product Development Consultancy based in India presently serves the Design, Analysis and Prototyping requirements of both local and oversea clients. At Rinine we utilise the latest in CAx ( CAD, CAE, CAM ) & PLM ( Product Life Cycle Management ) Technologies to provide solutions for the entire life cycle of a product.
More :=> www.rinine.com
Made for Fame: An Idea for Alternative Cosmetics Use CasesTheresa Akers
A product design concept tackling the issues of sustainability within the cosmetics industry, the Airelift System blends DIY culture with cutting edge technology to create a makeup line that empowers women to take charge of their own impact - in whatever way she chooses to.
Design of Mini Compressorless Solar Powered RefrigeratorGirish Gupta
This project is based on the development of a solar based compressor free mini fridge. This fridge is suitable for cooling purposes meant for small objects and have a relatively small chilling time as compared to the normal refrigeration systems.
Geothermal Energy is heat (thermal) derived from the earth (geo).
•It is the thermal energy from the earth's core, which is stored in the rock in the earth's crust.
Flight Dental Systems Class B Autoclave - Clave BFLIGHT DENTAL
The Flight Clave B Autoclave is fast and efficient and able to sterilize any load type. It is a Class B Sterilizer with big abilities and capacity. Excellent for any dental, medical, veterinary, or hospital setting requiring to sterilizer hollow or porous instruments effectively, efficiently and safely.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
2. INTRODUCTION
Atmosphere contains large amount of water in the form of vapor, moisture
etc.
This device is capable of converting atmospheric moisture directly into usable
and even drinking water.
3. PARTS
Frame and exterior parts
Aluminum/plastic body
Wheels
Front panel
Side panels with air filters
4. Parts (contd.)
Absorption chamber
Plastic chamber
Mist eliminator
Nozzle
Tower packings
Radial fan
Licl storage tank
Circulation pump
5. Parts (contd.)
Heater
Immersion heater
Thermo sensor
Pressure sensor
Heat exchanger
Condenser
Condenser piping
Water trap
Distilled water tank
Fresh water pump
Active carbon filter
Fresh water tank
Level sensor
Uv lamp
Water dispenser
Tap
Hot and cold switches
TFT display
10. Step – 3: Air going to mist eliminator
To prevent the LiCl mist from leaving the machine via top chamber outlet.
Reason
licl is harmful
Affects the performance
20. Carbon filter
Absorbs volatile chemicals on a molecular basis at lower cost.
Reduce bad taste, odor and chlorine.
Great volatile organic contaminants reduction
21. UV light (200-280 nanometer)
UV doesnot change taste, odor, color or pH of the water.
Lowers overall bacterial count
24. Advantages
Ecofriendly.
Convenient.
Ease of use.
Energy efficient.
Can be run on solar power.
Does not waste water
Disadvantages
• Does not provide a high yield of water in areas with low humidity.