Assignment 1 - Software (Presentation Slide)
•
2 likes•238 views
This document discusses and compares three measurement methods - BIM, CAD, and manual measurement - across different stages of construction projects including briefing, design, pre-construction, construction, and post-construction. For each stage and measurement method, the document lists their benefits and constraints. Overall, BIM measurement enables better visualization, time savings, and recommendations, but has high costs and a lack of experts. CAD measurement provides accurate design and cost modeling but lacks standardization. Manual measurement is cost-effective but error-prone and time-consuming.
Report
Share
Report
Share
Download to read offline
Recommended
EXPERIMENTAL STUDY AND THERMAL MODEL DEVELOPMENT OF DRY PROCESS
This document presents an experimental study and thermal modeling of the dry electric discharge machining (EDM) process. The study aims to develop a dry EDM setup using compressed air as the dielectric medium. Experiments are conducted using a Taguchi design of experiments to analyze how process parameters like current, pulse-on time, and air pressure impact responses like material removal rate, tool wear rate, and surface roughness. Results show that pulse-on time most significantly impacts material removal rate while current and pulse-on time significantly impact tool wear rate. The study concludes that dry EDM can improve surface quality and machining rates compared to conventional EDM. Future work will optimize multiple responses using grey relational analysis.
IRJET- Implementation of Arduino UNO based Two Directional [2D] Plotter
This document describes a proposed affordable 2D plotter machine that can write text converted from voice input using an Android AMR voice application. The plotter uses an Arduino Uno microcontroller to convert G-code instructions into motor control signals. The G-code is sent to the plotter via Bluetooth from the Android app after the user's voice is recognized. The plotter is intended to help handicapped or temporarily injured users produce written text.
Investigation of Material Removal Rate, Surface Roughness and Surface Morphol...
This document summarizes a study that investigated the effect of wire-electro discharge machining (WEDM) process parameters on material removal rate and surface roughness when machining die steel D3. The study used a Taguchi design of experiments approach with three parameters (peak current, pulse-on time, and wire tension) each at three levels. The results showed that peak current had the greatest influence on both material removal rate and surface roughness, followed by pulse-on time, while wire tension had the least influence. Material removal rate and surface roughness both generally increased with increasing levels of the three parameters. The optimal combination of parameters was determined to maximize material removal rate while minimizing surface roughness.
Group presentation compiled and updated 2
The document discusses several construction estimating software programs, including CostX, Buildsoft, Autodesk Quantity Take-Off, Cubicost by Glodon, and WinQS. For each software, the document provides information on the company, key functions, and potential limitations. It also includes details on the measuring and estimating capabilities of the different programs.
IRJET- N.C. Drilling Machine
This document summarizes the design of an automated numerical control (NC) drilling machine. The machine uses a microcontroller to control drilling depth based on numeric input from a 12-key keypad. When a depth is entered and start is pressed, the drill motor activates and drills to the programmed depth. The microcontroller continuously monitors the keypad and stores input in its memory. The automated machine aims to improve drilling accuracy, productivity, and reduce bit wear by controlling drilling depth precisely according to programmed values for repeated mass production tasks.
RAIN SENSING AUTOMATIC CAR WIPER BY GADDAM SANJAY
This document reviews a student project on an automatic rain sensing car wiper system. It includes sections on the objective, abstract, introduction, existing and proposed systems, block diagram, components, circuit diagram and working, advantages and disadvantages, applications, results and conclusion, and references. The objective is to develop an effective and environmentally friendly automatic wiper mechanism. The proposed system uses a rain sensor and microcontroller to automatically turn the wipers on when rain is detected and off when rain stops without manual intervention. The circuit diagram and working demonstrate how the system operates based on rain sensor input. The conclusions are that the prototype demonstrates the working of automatic wipers that display status messages on an LCD.
IRJET - Virtual Mechanisms
1) The document discusses the modeling and development of virtual application software to simulate various engineering mechanisms.
2) CAD is used to create 3D wireframe models of common mechanisms like links and joints.
3) The virtual mechanisms are then animated to simulate their motion in a simulated environment, allowing for analysis of industrial applications.
08. cad&cam
This document outlines the curriculum and syllabus for the M.E. CAD/CAM program at Anna University in Chennai, India. It includes the course requirements and electives for each of the four semesters. The first semester covers topics like advanced numerical methods, computer applications in design, integrated mechanical design, and finite element analysis. The second semester focuses on design for manufacturing, additive manufacturing, and integrated product development. The third semester is dedicated to elective courses and a project phase. The final semester involves completing the project work. The document also provides the course codes, titles, credit hours and syllabus for each course.
Recommended
EXPERIMENTAL STUDY AND THERMAL MODEL DEVELOPMENT OF DRY PROCESS
This document presents an experimental study and thermal modeling of the dry electric discharge machining (EDM) process. The study aims to develop a dry EDM setup using compressed air as the dielectric medium. Experiments are conducted using a Taguchi design of experiments to analyze how process parameters like current, pulse-on time, and air pressure impact responses like material removal rate, tool wear rate, and surface roughness. Results show that pulse-on time most significantly impacts material removal rate while current and pulse-on time significantly impact tool wear rate. The study concludes that dry EDM can improve surface quality and machining rates compared to conventional EDM. Future work will optimize multiple responses using grey relational analysis.
IRJET- Implementation of Arduino UNO based Two Directional [2D] Plotter
This document describes a proposed affordable 2D plotter machine that can write text converted from voice input using an Android AMR voice application. The plotter uses an Arduino Uno microcontroller to convert G-code instructions into motor control signals. The G-code is sent to the plotter via Bluetooth from the Android app after the user's voice is recognized. The plotter is intended to help handicapped or temporarily injured users produce written text.
Investigation of Material Removal Rate, Surface Roughness and Surface Morphol...
This document summarizes a study that investigated the effect of wire-electro discharge machining (WEDM) process parameters on material removal rate and surface roughness when machining die steel D3. The study used a Taguchi design of experiments approach with three parameters (peak current, pulse-on time, and wire tension) each at three levels. The results showed that peak current had the greatest influence on both material removal rate and surface roughness, followed by pulse-on time, while wire tension had the least influence. Material removal rate and surface roughness both generally increased with increasing levels of the three parameters. The optimal combination of parameters was determined to maximize material removal rate while minimizing surface roughness.
Group presentation compiled and updated 2
The document discusses several construction estimating software programs, including CostX, Buildsoft, Autodesk Quantity Take-Off, Cubicost by Glodon, and WinQS. For each software, the document provides information on the company, key functions, and potential limitations. It also includes details on the measuring and estimating capabilities of the different programs.
IRJET- N.C. Drilling Machine
This document summarizes the design of an automated numerical control (NC) drilling machine. The machine uses a microcontroller to control drilling depth based on numeric input from a 12-key keypad. When a depth is entered and start is pressed, the drill motor activates and drills to the programmed depth. The microcontroller continuously monitors the keypad and stores input in its memory. The automated machine aims to improve drilling accuracy, productivity, and reduce bit wear by controlling drilling depth precisely according to programmed values for repeated mass production tasks.
RAIN SENSING AUTOMATIC CAR WIPER BY GADDAM SANJAY
This document reviews a student project on an automatic rain sensing car wiper system. It includes sections on the objective, abstract, introduction, existing and proposed systems, block diagram, components, circuit diagram and working, advantages and disadvantages, applications, results and conclusion, and references. The objective is to develop an effective and environmentally friendly automatic wiper mechanism. The proposed system uses a rain sensor and microcontroller to automatically turn the wipers on when rain is detected and off when rain stops without manual intervention. The circuit diagram and working demonstrate how the system operates based on rain sensor input. The conclusions are that the prototype demonstrates the working of automatic wipers that display status messages on an LCD.
IRJET - Virtual Mechanisms
1) The document discusses the modeling and development of virtual application software to simulate various engineering mechanisms.
2) CAD is used to create 3D wireframe models of common mechanisms like links and joints.
3) The virtual mechanisms are then animated to simulate their motion in a simulated environment, allowing for analysis of industrial applications.
08. cad&cam
This document outlines the curriculum and syllabus for the M.E. CAD/CAM program at Anna University in Chennai, India. It includes the course requirements and electives for each of the four semesters. The first semester covers topics like advanced numerical methods, computer applications in design, integrated mechanical design, and finite element analysis. The second semester focuses on design for manufacturing, additive manufacturing, and integrated product development. The third semester is dedicated to elective courses and a project phase. The final semester involves completing the project work. The document also provides the course codes, titles, credit hours and syllabus for each course.
Improving the Performance of Laser CNC Machine at Different Grade of Aluminiu...
This document discusses research on improving the performance of laser CNC machines when cutting different grades of aluminum sheet. It first provides background on CNC machines and laser cutting techniques. It then reviews several past studies that investigated optimizing laser cutting parameters like power, gas pressure, pulse frequency and cutting speed to achieve crack-free cuts in ceramics and improve surface finish. The literature review covered research on fiber lasers for thick alumina cutting, CO2 laser underwater machining of alumina, and modeling of thermal stresses during laser cutting of materials.
IRJET-IoT based Smart Electricity Meter and Power Theft Detection
This document proposes an IoT-based smart electricity meter and power theft detection system. The system uses a microcontroller connected to an electricity meter to automatically read consumption data. It sends this data daily to a database via the internet and to users via GSM. Users can access their consumption via an app or website. If consumption exceeds a limit, the power supply is automatically cut off. The system also detects power theft by comparing meter readings at the distribution post and user end - if there is a discrepancy, a theft message is sent to the utility and user. This automated system aims to improve billing accuracy, provide real-time usage data to users, and help reduce power theft.
IRJET- Metal Crack Detection using Image Processing
This document presents a system for detecting cracks and holes in metal pieces using image processing. The system uses a Raspberry Pi along with sensors like infrared and proximity sensors. Images of metal pieces on a production line are analyzed using computer vision algorithms like Canny edge detection to identify cracks. Detected cracks are used to separate defective from non-defective metal pieces. Data on quality inspection is sent from the Raspberry Pi to the cloud for remote access. The system aims to automate quality inspection to reduce manual labor needs and increase production efficiency compared to human-based inspection.
Gsm Based Energy Meter Monitoring and Load Control
This document describes a GSM-based energy meter monitoring and load control system. The system aims to make the process of reading energy meters and issuing bills more efficient for electricity providers. Currently, electricity boards send employees to manually read consumers' energy meters each month, which is time-consuming and prone to errors. The proposed system uses a GSM module connected to an energy meter to automatically send meter readings to the electricity provider upon request via SMS. This allows remote monitoring of energy consumption and fast feedback without site visits. The system could also enable prepaid energy billing and remote load control. It is presented as reducing costs and errors for electricity providers compared to the current manual process.
IRJET- Design and Fabrication of Automatic PVC Pipe Feed and Cutting Machine
The document describes the design and fabrication of an automatic PVC pipe feeding and cutting machine. The machine aims to automate the pipe cutting process for improved productivity compared to manual cutting. It uses a DC motor and sensors to automatically feed the PVC pipe into a chuck where it is cut to the specified length by a hacksaw blade. The machine cuts multiple pipes in a batch automatically without human involvement in measuring or loading/unloading the pipes. This reduces labor costs and improves accuracy of cutting uniform lengths of pipe needed for mass production.
ENERGY METER READING SYSTEM WITH AUTOMATIC BILLING USING CLOUD
The document presents an energy meter reading system that automatically sends electricity consumption and billing information to users via SMS. It consists of an Arduino, current sensor to measure electricity usage, and GSM module. The system continuously monitors electricity pulses, calculates consumption in units, and determines billing cost. Both the user and electricity provider receive SMS updates with this information. It aims to reduce manual meter reading labor and provide remote access to usage data and bills. The system was tested and successfully sent SMS notifications with consumption units and rupee cost to users. Future work could expand it to include a mobile app for real-time usage monitoring and energy savings tips.
IRJET- Automation of Circular Welding
The document discusses the design and development of a semi-automated circular welding machine to increase welding accuracy and productivity while reducing costs and labor. Key aspects addressed include selecting appropriate gears, motors, and frames to enable stable linear and angular motion of the welding torch. The experimental setup and application of the circular welding machine is also outlined.
IRJET- Quantative Analysis of Undercut in PCM for SS304
This document presents an experimental study analyzing the effects of process parameters on undercut in photo chemical machining (PCM) of stainless steel 304. The study used Taguchi's orthogonal array design of experiments to evaluate the effects of etchant concentration, temperature, and time on the undercut response. Optimum values were identified as an etchant temperature of 50°C, concentration of 600 gm/liter, and etching time of 40 minutes. Analysis of variance (ANOVA) was used to analyze the results. An artificial neural network model was also developed to predict undercut values. The study aims to improve productivity and surface quality in PCM of stainless steel 304 by determining optimal process parameters that minimize undercut.
Energy Conservation Bidirectional visitor counter
This document describes a bidirectional visitor counter system that counts the number of people entering and leaving a room and displays the total on an LCD screen. It uses an IR sensor to detect movement and an Arduino microcontroller to increment or decrement the counter. When the count is zero, lights and fans automatically turn off to conserve energy. The system was successfully developed and tested, accurately counting visitors and controlling appliances in the room based on occupancy. It provides an effective way to monitor space usage and save electricity.
IRJET- Design and Implement Mechanism for Efficient Energy Meter using IoT
This document describes a proposed smart electricity meter system using IoT. The system would automate the manual process of monthly electricity bill calculation and reading. Sensors in the electricity meter would collect real-time energy consumption data and send it wirelessly to a centralized system. This would make the billing process more accurate and efficient by eliminating human error. It could also provide load monitoring to strengthen the electricity distribution system based on usage patterns. The proposed system aims to reduce costs for utilities while providing users with more control over their electricity usage and billing.
IRJET- Additive Cum Electronic (ACE) – 3D Printer
The document describes a proposed 3D printer called the Additive Cum Electronic (ACE) printer. It aims to integrate both insulating parts and electronic circuits into a single printed object using two nozzles - one for insulating materials and another on a robotic arm for drawing conductive pathways. This would allow electronic devices to be printed without circuit boards in complex shapes. The printer uses fused deposition modeling with PLA or ABS for insulators and a conductive material extruded by the robotic arm nozzle. This integrated process could reduce complexity, space requirements and costs for manufacturing electronic devices.
Automatic Customer Counter and Payment Tool for Shopping Centers and commerci...
The document describes an automatic customer counter and payment system for shopping centers and commercial spaces. The system uses infrared barriers, a movement sensor, and RF technology to detect and count customers. It also uses electronic badges and an Arduino to track employee work hours. Customer and employee data is sent wirelessly to a PC interface via XBee modules. The interface displays customer numbers, statistics, and allows viewing employee profiles and calculating salaries. Testing showed the system provided reliable customer counts that closely matched manual counts, demonstrating it can accurately monitor customers and employees for centers.
IRJET- Material Dimension Analyzing in Conveyor
This document describes a material dimension analysis machine that uses sensors on a conveyor system to measure the dimensions of materials and display the results. Key components include a conveyor belt powered by a DC motor to transport materials, sensors to detect the length and width, a microcontroller to process the sensor readings and display the results, and an LCD screen to output the dimension measurements in mm. The system is designed to automate dimensional inspection and reduce manual inspection errors and time for quality control purposes in manufacturing industries.
E43042629
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Mitutoyo 2020 Height Gage Promo
For the month of September, Mitutoyo is offering a promo featuring their Height Gages. Height Gages like the LH-600E 2D Linear Height Gage and accessories are 10% off! Explore the Promo Catalog and contact Berg Engineering for your ordering needs.
Design and Development of Pipe Traversing Robot
This document describes the design and development of a pipe traversing robot. The robot is intended to inspect pipes for defects by traveling inside pipes and carrying various sensors. It uses multiple locomotion methods, including wheels and articulating arms, to navigate pipes of varying diameters. The robot is powered by a 12V battery and controlled using an Arduino microcontroller. Key components include DC motors, wheels, extending arms, and distance and camera sensors. Calculations were performed to select appropriate motor torques capable of powering the robot's movement inside pipes. The robot was modeled in CAD software and is designed to autonomously inspect pipes for issues like cracks and corrosion.
Electricity Theft: Reason and Solution
This document discusses electricity theft detection and presents a proposed solution. It begins with an introduction to electricity monitoring and challenges with theft. It then describes a system to monitor power consumption from a central location using microcontrollers, current sensors, and wireless communication between users and a substation. The system is designed to identify authorized vs unauthorized power usage to help control theft. It provides details of the system design including components, working principle, and a theft detection method based on comparing power sent and consumed. Testing showed the prototype hardware worked satisfactorily for its purpose of informing authorities about theft by detecting excess power usage.
ENERGY METER READING SYSTEM WITH AUTOMATIC BILLING USING CLOUD
The document presents a system for automatic energy meter reading and billing using cloud technology. It uses an Arduino, current sensor, and GSM module to continuously monitor electricity consumption. The system calculates usage and cost, displays it on an LCD screen, and sends an SMS bill to the user and electric company. It aims to reduce manual labor by automating meter reading and billing. The system analysis electrical pulses to compute usage units in real-time and notify both customers and providers remotely via SMS and a web-based interface.
COLLISION AVOIDANCE SYSTEM
1) The document describes a collision avoidance system for autonomous vehicles that uses a Raspberry Pi, ultrasonic sensor, camera, GPS module, LCD display, and motor driver.
2) The system is able to detect objects using the ultrasonic sensor and camera, determine the distance to objects using vision processing techniques on images from the camera, and control the vehicle's motors using the motor driver to avoid collisions based on object distances.
3) Experimental results showed the system successfully detecting obstacles, measuring distances, and simulating avoidance maneuvers in response to obstacles getting too close. The goal is to reduce accidents caused by human errors by allowing vehicles to autonomously sense and avoid collisions.
IRJET - Analysis of Rejection of Square Piston and its Remedies
This document analyzes the rejection of square pistons in a manufacturing process and proposes remedies. It finds that the hydraulic piston part has the highest rejection rate of 58 components out of the total rejected over 3 months. The CNC turning machine was responsible for the most rejections at 28 components, followed by the arm milling machine at 21. Further analysis of the face milling process found the primary defects were milling width minus, accounting for 11 rejected components, and milling taper, accounting for 8 rejected components. The document aims to reduce rejection rates by identifying causes of defects through statistical analysis tools like Pareto charts.
Assignment 2 - Resort Proposal at Pulau Langkawi
The document provides details of a proposed resort project at Pulau Langkawi, Malaysia. It includes a group of 6 students who prepared the report, the table of contents, and an introduction that gives background on the project site and land. Sections cover the proposed design, procurement management, time management, cost estimation, quality management, risk management, and environmental protection management for the resort project.
Assignment 2 - Report
This document outlines a group project for a Bachelor of Quantity Surveying course. Students will visit Pulau Langkawi or the alternative site of Pulau Ketam to observe and analyze the islands. They must then prepare a business proposal as an investor seeking to build a resort, covering items such as project background, design, time and cost estimates, quality and risk management, and environmental protection. Upon completion, students will submit a written report and presentation, gaining hands-on experience assessing a project site and understanding an investor's role and responsibilities. The goal is for students to research and propose suggestions for improving any resort development plans.
More Related Content
Similar to Assignment 1 - Software (Presentation Slide)
Improving the Performance of Laser CNC Machine at Different Grade of Aluminiu...
This document discusses research on improving the performance of laser CNC machines when cutting different grades of aluminum sheet. It first provides background on CNC machines and laser cutting techniques. It then reviews several past studies that investigated optimizing laser cutting parameters like power, gas pressure, pulse frequency and cutting speed to achieve crack-free cuts in ceramics and improve surface finish. The literature review covered research on fiber lasers for thick alumina cutting, CO2 laser underwater machining of alumina, and modeling of thermal stresses during laser cutting of materials.
IRJET-IoT based Smart Electricity Meter and Power Theft Detection
This document proposes an IoT-based smart electricity meter and power theft detection system. The system uses a microcontroller connected to an electricity meter to automatically read consumption data. It sends this data daily to a database via the internet and to users via GSM. Users can access their consumption via an app or website. If consumption exceeds a limit, the power supply is automatically cut off. The system also detects power theft by comparing meter readings at the distribution post and user end - if there is a discrepancy, a theft message is sent to the utility and user. This automated system aims to improve billing accuracy, provide real-time usage data to users, and help reduce power theft.
IRJET- Metal Crack Detection using Image Processing
This document presents a system for detecting cracks and holes in metal pieces using image processing. The system uses a Raspberry Pi along with sensors like infrared and proximity sensors. Images of metal pieces on a production line are analyzed using computer vision algorithms like Canny edge detection to identify cracks. Detected cracks are used to separate defective from non-defective metal pieces. Data on quality inspection is sent from the Raspberry Pi to the cloud for remote access. The system aims to automate quality inspection to reduce manual labor needs and increase production efficiency compared to human-based inspection.
Gsm Based Energy Meter Monitoring and Load Control
This document describes a GSM-based energy meter monitoring and load control system. The system aims to make the process of reading energy meters and issuing bills more efficient for electricity providers. Currently, electricity boards send employees to manually read consumers' energy meters each month, which is time-consuming and prone to errors. The proposed system uses a GSM module connected to an energy meter to automatically send meter readings to the electricity provider upon request via SMS. This allows remote monitoring of energy consumption and fast feedback without site visits. The system could also enable prepaid energy billing and remote load control. It is presented as reducing costs and errors for electricity providers compared to the current manual process.
IRJET- Design and Fabrication of Automatic PVC Pipe Feed and Cutting Machine
The document describes the design and fabrication of an automatic PVC pipe feeding and cutting machine. The machine aims to automate the pipe cutting process for improved productivity compared to manual cutting. It uses a DC motor and sensors to automatically feed the PVC pipe into a chuck where it is cut to the specified length by a hacksaw blade. The machine cuts multiple pipes in a batch automatically without human involvement in measuring or loading/unloading the pipes. This reduces labor costs and improves accuracy of cutting uniform lengths of pipe needed for mass production.
ENERGY METER READING SYSTEM WITH AUTOMATIC BILLING USING CLOUD
The document presents an energy meter reading system that automatically sends electricity consumption and billing information to users via SMS. It consists of an Arduino, current sensor to measure electricity usage, and GSM module. The system continuously monitors electricity pulses, calculates consumption in units, and determines billing cost. Both the user and electricity provider receive SMS updates with this information. It aims to reduce manual meter reading labor and provide remote access to usage data and bills. The system was tested and successfully sent SMS notifications with consumption units and rupee cost to users. Future work could expand it to include a mobile app for real-time usage monitoring and energy savings tips.
IRJET- Automation of Circular Welding
The document discusses the design and development of a semi-automated circular welding machine to increase welding accuracy and productivity while reducing costs and labor. Key aspects addressed include selecting appropriate gears, motors, and frames to enable stable linear and angular motion of the welding torch. The experimental setup and application of the circular welding machine is also outlined.
IRJET- Quantative Analysis of Undercut in PCM for SS304
This document presents an experimental study analyzing the effects of process parameters on undercut in photo chemical machining (PCM) of stainless steel 304. The study used Taguchi's orthogonal array design of experiments to evaluate the effects of etchant concentration, temperature, and time on the undercut response. Optimum values were identified as an etchant temperature of 50°C, concentration of 600 gm/liter, and etching time of 40 minutes. Analysis of variance (ANOVA) was used to analyze the results. An artificial neural network model was also developed to predict undercut values. The study aims to improve productivity and surface quality in PCM of stainless steel 304 by determining optimal process parameters that minimize undercut.
Energy Conservation Bidirectional visitor counter
This document describes a bidirectional visitor counter system that counts the number of people entering and leaving a room and displays the total on an LCD screen. It uses an IR sensor to detect movement and an Arduino microcontroller to increment or decrement the counter. When the count is zero, lights and fans automatically turn off to conserve energy. The system was successfully developed and tested, accurately counting visitors and controlling appliances in the room based on occupancy. It provides an effective way to monitor space usage and save electricity.
IRJET- Design and Implement Mechanism for Efficient Energy Meter using IoT
This document describes a proposed smart electricity meter system using IoT. The system would automate the manual process of monthly electricity bill calculation and reading. Sensors in the electricity meter would collect real-time energy consumption data and send it wirelessly to a centralized system. This would make the billing process more accurate and efficient by eliminating human error. It could also provide load monitoring to strengthen the electricity distribution system based on usage patterns. The proposed system aims to reduce costs for utilities while providing users with more control over their electricity usage and billing.
IRJET- Additive Cum Electronic (ACE) – 3D Printer
The document describes a proposed 3D printer called the Additive Cum Electronic (ACE) printer. It aims to integrate both insulating parts and electronic circuits into a single printed object using two nozzles - one for insulating materials and another on a robotic arm for drawing conductive pathways. This would allow electronic devices to be printed without circuit boards in complex shapes. The printer uses fused deposition modeling with PLA or ABS for insulators and a conductive material extruded by the robotic arm nozzle. This integrated process could reduce complexity, space requirements and costs for manufacturing electronic devices.
Automatic Customer Counter and Payment Tool for Shopping Centers and commerci...
The document describes an automatic customer counter and payment system for shopping centers and commercial spaces. The system uses infrared barriers, a movement sensor, and RF technology to detect and count customers. It also uses electronic badges and an Arduino to track employee work hours. Customer and employee data is sent wirelessly to a PC interface via XBee modules. The interface displays customer numbers, statistics, and allows viewing employee profiles and calculating salaries. Testing showed the system provided reliable customer counts that closely matched manual counts, demonstrating it can accurately monitor customers and employees for centers.
IRJET- Material Dimension Analyzing in Conveyor
This document describes a material dimension analysis machine that uses sensors on a conveyor system to measure the dimensions of materials and display the results. Key components include a conveyor belt powered by a DC motor to transport materials, sensors to detect the length and width, a microcontroller to process the sensor readings and display the results, and an LCD screen to output the dimension measurements in mm. The system is designed to automate dimensional inspection and reduce manual inspection errors and time for quality control purposes in manufacturing industries.
E43042629
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Mitutoyo 2020 Height Gage Promo
For the month of September, Mitutoyo is offering a promo featuring their Height Gages. Height Gages like the LH-600E 2D Linear Height Gage and accessories are 10% off! Explore the Promo Catalog and contact Berg Engineering for your ordering needs.
Design and Development of Pipe Traversing Robot
This document describes the design and development of a pipe traversing robot. The robot is intended to inspect pipes for defects by traveling inside pipes and carrying various sensors. It uses multiple locomotion methods, including wheels and articulating arms, to navigate pipes of varying diameters. The robot is powered by a 12V battery and controlled using an Arduino microcontroller. Key components include DC motors, wheels, extending arms, and distance and camera sensors. Calculations were performed to select appropriate motor torques capable of powering the robot's movement inside pipes. The robot was modeled in CAD software and is designed to autonomously inspect pipes for issues like cracks and corrosion.
Electricity Theft: Reason and Solution
This document discusses electricity theft detection and presents a proposed solution. It begins with an introduction to electricity monitoring and challenges with theft. It then describes a system to monitor power consumption from a central location using microcontrollers, current sensors, and wireless communication between users and a substation. The system is designed to identify authorized vs unauthorized power usage to help control theft. It provides details of the system design including components, working principle, and a theft detection method based on comparing power sent and consumed. Testing showed the prototype hardware worked satisfactorily for its purpose of informing authorities about theft by detecting excess power usage.
ENERGY METER READING SYSTEM WITH AUTOMATIC BILLING USING CLOUD
The document presents a system for automatic energy meter reading and billing using cloud technology. It uses an Arduino, current sensor, and GSM module to continuously monitor electricity consumption. The system calculates usage and cost, displays it on an LCD screen, and sends an SMS bill to the user and electric company. It aims to reduce manual labor by automating meter reading and billing. The system analysis electrical pulses to compute usage units in real-time and notify both customers and providers remotely via SMS and a web-based interface.
COLLISION AVOIDANCE SYSTEM
1) The document describes a collision avoidance system for autonomous vehicles that uses a Raspberry Pi, ultrasonic sensor, camera, GPS module, LCD display, and motor driver.
2) The system is able to detect objects using the ultrasonic sensor and camera, determine the distance to objects using vision processing techniques on images from the camera, and control the vehicle's motors using the motor driver to avoid collisions based on object distances.
3) Experimental results showed the system successfully detecting obstacles, measuring distances, and simulating avoidance maneuvers in response to obstacles getting too close. The goal is to reduce accidents caused by human errors by allowing vehicles to autonomously sense and avoid collisions.
IRJET - Analysis of Rejection of Square Piston and its Remedies
This document analyzes the rejection of square pistons in a manufacturing process and proposes remedies. It finds that the hydraulic piston part has the highest rejection rate of 58 components out of the total rejected over 3 months. The CNC turning machine was responsible for the most rejections at 28 components, followed by the arm milling machine at 21. Further analysis of the face milling process found the primary defects were milling width minus, accounting for 11 rejected components, and milling taper, accounting for 8 rejected components. The document aims to reduce rejection rates by identifying causes of defects through statistical analysis tools like Pareto charts.
Similar to Assignment 1 - Software (Presentation Slide) (20)
Improving the Performance of Laser CNC Machine at Different Grade of Aluminiu...
Improving the Performance of Laser CNC Machine at Different Grade of Aluminiu...
IRJET-IoT based Smart Electricity Meter and Power Theft Detection
IRJET-IoT based Smart Electricity Meter and Power Theft Detection
IRJET- Metal Crack Detection using Image Processing
IRJET- Metal Crack Detection using Image Processing
Gsm Based Energy Meter Monitoring and Load Control
Gsm Based Energy Meter Monitoring and Load Control
IRJET- Design and Fabrication of Automatic PVC Pipe Feed and Cutting Machine
IRJET- Design and Fabrication of Automatic PVC Pipe Feed and Cutting Machine
ENERGY METER READING SYSTEM WITH AUTOMATIC BILLING USING CLOUD
ENERGY METER READING SYSTEM WITH AUTOMATIC BILLING USING CLOUD
IRJET- Quantative Analysis of Undercut in PCM for SS304
IRJET- Quantative Analysis of Undercut in PCM for SS304
IRJET- Design and Implement Mechanism for Efficient Energy Meter using IoT
IRJET- Design and Implement Mechanism for Efficient Energy Meter using IoT
Automatic Customer Counter and Payment Tool for Shopping Centers and commerci...
Automatic Customer Counter and Payment Tool for Shopping Centers and commerci...
ENERGY METER READING SYSTEM WITH AUTOMATIC BILLING USING CLOUD
ENERGY METER READING SYSTEM WITH AUTOMATIC BILLING USING CLOUD
IRJET - Analysis of Rejection of Square Piston and its Remedies
IRJET - Analysis of Rejection of Square Piston and its Remedies
More from Kai Yun Pang
Assignment 2 - Resort Proposal at Pulau Langkawi
The document provides details of a proposed resort project at Pulau Langkawi, Malaysia. It includes a group of 6 students who prepared the report, the table of contents, and an introduction that gives background on the project site and land. Sections cover the proposed design, procurement management, time management, cost estimation, quality management, risk management, and environmental protection management for the resort project.
Assignment 2 - Report
This document outlines a group project for a Bachelor of Quantity Surveying course. Students will visit Pulau Langkawi or the alternative site of Pulau Ketam to observe and analyze the islands. They must then prepare a business proposal as an investor seeking to build a resort, covering items such as project background, design, time and cost estimates, quality and risk management, and environmental protection. Upon completion, students will submit a written report and presentation, gaining hands-on experience assessing a project site and understanding an investor's role and responsibilities. The goal is for students to research and propose suggestions for improving any resort development plans.
Assignment 1 - Water Pump Station
The document outlines the tasks, durations, and schedule for constructing a water pump station over 279 days. Key steps include:
1. Applying for permits over 27 days and clearing/preparing the site over 7 days.
2. Installing sheet piles over 18 days to prevent soil collapse during the 90-day excavation period.
3. Pouring the concrete mat foundation and inverse slab over 43 days after erecting formwork and reinforcement bars over 10 days. The foundation will cure for 7 days before dismantling forms over 8 days.
4. Constructing the heavy wall from elevation 72 to 95 feet over 28 days, including forming, reinforcing, pouring, and curing concrete sections.
Assignment 1 - Microsoft Project
The document outlines the schedule and dependencies for tasks in building a water pump station project. Key tasks include obtaining permits, installing utilities, driving sheet piles, excavation and tiebacks over 90 days, pouring the foundation and slab over 43 days, and constructing and waterproofing the walls. The individual is asked to build a precedence table and solve the initial network in MS Project, listing assumptions and identifying the critical path and Gantt chart.
Assignment - Financial Appraisal
This document outlines a group assignment for a development economics course. It includes details of the proposed development such as land size, number and type of units, and a financial appraisal. The development will include shop/office, terrace, and low-cost housing units totaling 164 units. The financial appraisal estimates construction costs, administrative costs, financing costs, and gross profit. Cash flow projections are provided for a "sell-then-build" approach, with monthly sales and construction progress outlined over a 12 month period.
Assignment - Financial Appraisal
The document provides information about a proposed mixed development project in Rawang, Selangor. It will consist of 26' x 80' double-storey shop/office lots, 22' x 75' double-storey terrace houses, and 20' x 60' double-storey low cost houses. Thirty percent of the development must be low cost houses, and fifteen percent must be shop/office lots. The developer obtained a loan to purchase the land three years ago and has since received development approvals. As the cost consultant, you must analyze the development, provide a financial appraisal using the residue method, and cash flow analysis under sell-then-build and build-then-sell concepts.
Assignment - FIDIC Contract
This document provides a group assignment analyzing the appropriate form of FIDIC contract for a construction project. It recommends using the FIDIC Red Book based on the client's requirements, including having full control of design and ability to make changes. Payment will be based on bills of quantities. The Red Book best fits the traditional procurement method preferred by the client and covers conditions regarding payment, contractual programming, termination, and dispute resolution relevant for the project.
Assignment - Report
The Vice-Chancellor of the Construction Management University is planning a RM400 million construction project to build a new Postgraduate Student Accommodation and Outreach Centre. A group of students has been assigned a project to advise the Vice-Chancellor on various legal and contractual issues regarding the project. Specifically, the students must propose an appropriate FIDIC form of contract for the project, analyze payment conditions, contractual programming, termination conditions, and dispute resolution methods in the chosen FIDIC contract. The students must also compare their analysis of the chosen FIDIC contract to either the PAM or JKR standard forms of contract. The report should not exceed 3000 words and is due by November 21st, 2018 for a grade worth
Seminar - CIPAA 2012
This document provides an overview of the Construction Industry Payment and Adjudication Act 2012 (CIPAA) in Malaysia. It discusses what CIPAA is, its main objectives to provide timely payment and dispute resolution in the construction industry, and the adjudication process for resolving payment disputes. Key points covered include that adjudication decisions are temporarily binding pending final resolution by arbitration or courts, KLRCA oversees the adjudication process and determines adjudicator standards and fees, and possible impacts of CIPAA include its long time frames compromising timely payment and respondents sometimes being disadvantaged.
Assignment - S Hotel (Presentation Slide)
Value management was conducted on an 11-storey hotel project that was 35% through the design stage. The 5-day workshop identified unnecessary costs and proposed alternative design solutions to improve value without affecting performance. Tools like fast diagrams, compound approaches, and cost reduction approaches were used. Space function analysis identified potential changes like enlarging the dining area. A priority matrix assessed options like changing to sound insulated doors and using precast hollow core slabs. Cost analysis found potential savings from proposals such as eliminating skylights and changing to LED lights. The value management study concluded identifying client requirements early improves value and is highly recommended.
Assignment - S Hotel
The value management study identified three key objectives: consider life cycle costs, increase building efficiency, and eliminate unnecessary functions. Various value management tools were used, including FAST diagrams and space functional analysis. This led to proposals like changing to precast hollow core slabs to reduce costs and solid wood doors in guest rooms to improve sound insulation. The study aimed to increase value for money for the hotel project while meeting budget constraints.
Assignment - Case Study Report
This document provides an assignment brief for a case study report on implementing value management in a construction project. Students are to prepare a value management study report on a chosen project. The report should include: an introduction outlining the primary purpose of the value management study, an executive summary of the project under study including a brief description and problem summary and the type of value management study undertaken. It also requires the results of any functional analysis or value management tools used, sketches showing proposed design changes, supporting technical data for alternatives, a cost plan or analysis, and an action plan to implement recommendations along with a conclusion and recommendations. The completed case study report and presentation are due by November 19th and will account for 30% of the total exam
Assignment - Journal
The document provides details of a student's community service project at an orphanage. It includes an introduction to the project, organization charts, timelines, meeting minutes, and descriptions of pre-event planning activities. The student and their peers visited Good Samaritan Homes orphanage in Klang, Malaysia to organize activities for the children living there. They divided responsibilities among teams and fundraised donations. The high-level purpose was for the students to conduct a meaningful community service activity and gain experience through engaging with the orphanage.
Assignment - Community Service
This document outlines a community service initiative for architecture students. It involves splitting 70 students into two groups to volunteer at an orphanage home or participate in experiential activities. Students will take on roles to plan and run role-playing games and career exposure activities for children ages 7-15. The 12-week project timeline includes selecting a beneficiary group, planning activities and games, preparing materials, the service visit, and presentations reflecting on the experience. Suggestions include preparing questionnaires and career information for the children.
Assignment - Final Account
This document contains a group assignment for a course on professional practice. It provides background on the group members and instructor. It then lists 4 questions for the assignment. Question 1 asks students to prepare a report explaining adjustments needed for the final account of a construction project. Question 2 asks about contractual implications of omitting an item from the tender document. Question 3 requires students to assess a contractor's final account application and prepare the final account based on provided valuations and adjustments. Question 4 asks students to explain how various variations would be finalized and priced in a final account.
Assignment - Report
This document contains information for a coursework assignment on preparing a final account for an apartment construction project. It provides background on the contract sum and nominated subcontractors' accounts. It also lists 4 questions for the assignment:
1) Explain adjustments needed for the final account;
2) Discuss implications of omitting an entrance porch from tender documents;
3) Complete the final account based on provided valuations and adjustments;
4) Explain how various variations would be finalized, including issues with insurance, computer equipment, a wash trough, and excavation rates.
Seminar - Partial Possession by Employer
Here are the key differences between Sectional Completion and Partial Possession:
Sectional Completion:
- Refers to completing different sections or phases of the overall works separately based on pre-agreed sectional completion dates.
- Allows the contractor to achieve practical completion for different sections at different times.
- Each section is treated as a separate contract with its own DLP, retention sums, etc.
Partial Possession:
- Refers to the employer taking possession of part of the completed works before overall practical completion.
- Can be done with or without the contractor's consent under certain conditions.
- The occupied part is deemed practically complete but the overall works contract remains.
- Effects like reduced
Seminar - Question
This document outlines the requirements for a group presentation assignment in a professional practice course. It will make up 15% of the final grade. Students will be assigned to groups of 3 and each group must do a 15 minute presentation on one of six topics related to quantity surveying, followed by a discussion of questions. Topics include construction disputes, delays and disputes, construction claims, partial possession by the employer, rights of setting off by the employer, and practical completion and penultimate certificate. The presentation will be assessed based on content, teamwork, organization, presentation skills, and handling of questions.
Assignment - MK Land
MK Land Holdings Berhad operates in multiple business segments including property development, leisure, education, and investment holding. It has developed various residential and commercial properties across Selangor, Perak, and Kedah. The company's leisure properties include hotels, resorts, and golf courses catering to domestic and international tourists. MK Land has also expanded into the education sector by establishing Lake View College, which offers diploma programs in nursing, occupational safety and health, and environment health. Property development remains the largest contributor to the company's revenue, with affordable housing comprising 65% of developed units. The company aims to continue growing its business across segments.
Assignment - Financial Analysis
The document provides guidelines for a group assignment to analyze the financial strength of MK Land Holdings Berhad, a property development company listed on Bursa Malaysia. Students are required to write a report not exceeding 3,000 words that includes: (1) a background of MK Land and its business segments, (2) an industry analysis, (3) an evaluation of MK Land's financial performance over the past three years using 17 financial ratios, and (4) conclusions and recommendations.
More from Kai Yun Pang (20)
Recently uploaded
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Recently uploaded (20)
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Assignment 1 - Software (Presentation Slide)
- 2. Group Member: NG SIEW QING 0325750 NGIENG TIEN YUNG 0320221 NGO JIA HAUR 0320144 OOI YIN JI (LEADER) 0319962 PANG KAI YUN 0319802 SAM WEI YIN 0320364 SANDRABROOKE GOH 0329884
- 3. PART A
- 9. FUNCTIONS CREATE 3D MODEL DIRECTLY IMPORT THE ELECTRICAL DRAWING CHANGES AND VARIATIONS CAN BE DONE QUICKLY
- 11. AUTO IDENTIFY PIPES, WIRES, CABLES, DUCTS PROVIDE SUMMARISED QUANTITY REPORT FUNCTIONS
- 12. COST NEWLY INTRODUCED TO INDUSTRY LACK OF EXPERTS LIMITATIONS
- 14. SUPPORT 2D TAKING OFF SUPPORT 3D TAKING OFF WORKBOOK FUNCTIONS
- 16. COST AND LICENSE REBAR DETECTION LIMITATIONS
- 18. TAKEOFF MANAGER ● PRODUCE QUICK AND HIGH ACCURACY OF QUANTITY TAKEOFF COST PLANNER ● COST ESTIMATING & CALCULATION ● VALUE ENGINEERING MODULE CONSTRUCTABILITY MANAGER ● DETECT CONSTRUCTABILITY ISSUE FUNCTIONS
- 20. SUMMARY
- 22. PART B
- 23. BRIEFING STAGE
- 24. BIM MEASUREMENT
- 25. VISUALIZATION IMPROVED BY 3D MODEL IMPROVE THE COMMUNICATION AND THE COORDINATION AMONG DIFFERENT PARTIES BENEFITS
- 26. CONSTRAINTS HIGH COST FOR SOFTWARE AND TRAINING
- 27. CAD MEASUREMENT
- 31. COST EFFECTIVE NO TRAINING IS REQUIRED BENEFITS
- 33. DESIGN STAGE
- 34. BIM MEASUREMENT
- 35. HIGH GRAPHIC PERSPECTIVE OF 3D MODELING IMPROVE EFFICIENCY REDUCE THE MATERIAL USAGE BENEFITS
- 36. CONSTRAINTS REQUIRE TRAINED OR EXPERIENCED TECHNICAL STAFF
- 37. CAD MEASUREMENT
- 38. BENEFITS ACCURATE DESIGN COST MODELLING
- 39. CONSTRAINTS LACK OF STANDARDISATION IN DESIGN LOSS OF WORK DUE TO NOT SAVING
- 41. COST EFFECTIVE NO TRAINING IS REQUIRED CLIENT’S SATISFACTION BENEFITS
- 44. BIM MEASUREMENT
- 45. SCHEDULING BY 4D BIM IMPROVE SAFETY COST ESTIMATING BY 5D BIM BENEFITS
- 46. CONSTRAINTS DEFECTIVE OF 4D BIM
- 47. CAD MEASUREMENT
- 49. CONSTRAINTS UNABLE TO PRODUCE BQ NEED TO BE EXPORTED TO OTHER SOFTWARE
- 51. COST EFFECTIVE NO TRAINING IS REQUIRED FLEXIBILITY IN WORKFLOW BENEFITS
- 54. BIM MEASUREMENT
- 57. CAD MEASUREMENT
- 59. CONSTRAINTS LIMITED TO 2D VOLUME CANNOT BE MEASURED
- 61. COST EFFECTIVE NO TRAINING IS REQUIRED SAFE AND SECURED BENEFITS
- 64. BIM MEASUREMENT
- 66. CULTURAL BARRIER TOWARD A NEW TECHNOLOGY CONSTRAINTS
- 67. CAD MEASUREMENT
- 71. EASY TO OBTAIN INFORMATION REDUCE THE RISK OF LOSS OF INFORMATION BENEFITS
- 72. REQUIRE PLACE TO STORE THE DRAWING TIME NEEDED AFTER COMMISSIONING LIMITED INFORMATION CONSTRAINTS
- 73. THANK YOU !