This document is a checklist for air compressors that should be completed weekly to ensure safety and operational efficiency. It includes a series of yes/no/n/a questions regarding safety features, maintenance conditions, and necessary equipment for each compressor. The checklist also requires comments, inspector signatures, and HSE manager review.

1. AIR COMPRESSOR CHECKLIST
(To be completed on weekly basis)
Page 1 of 1 Form # HSEQ- ACL (Rev 2 – Mar 23)
Project Information
Project Name: Serial No:
Location: Manufacture Name:
Company Name: Date :
3rd
Party Inspection valid till:
Sr. Description Yes No N/A Comments
1. Are compressors equipped with pressure relief valves and
pressure gauges?
2. Are signs posted to warn about hot surfaces of the
exhaust?
3. Air compressor 3rd party certificate available?
4. Is whip check arrestor used in all coupling points?
5. Is the belt drive system totally enclosed to provide
protection for the front, back, top, and sides?
6. Air hoses in good condition without cracks/ damages.
7. Control valves in good condition
8. Is there any oil leakage
9. Drip tray provided
10. Fire extinguisher provided
11. Any damage/Cut in tires/ tire pressure
12. Meter gauge working properly
13. Lifting Hooks damaged
14. Battery of air compressor charged
15. Visible damage
16.
Exhaust directed/ close to combustibles/ flammables
17.
Exhaust not directed inside any room. (Internal
Combustion Air Compressors shall be kept outside in the
well-ventilated area)
18.
Others specify:
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / in charge : Signature: