Abstract
In digital image processing noise removal or noise filtering plays an important role, because for meaningful and useful processing images should not be corrupted by noises. In recent years, high quality televisions have become very popular but noise often affects TV broadcasts. Impulse noise corrupts the video during transmission and acquisition of signals. A number of denoising techniques have been introduced to remove impulse noise from images . Linear noise filtering technique does not work well when the noise is non-adaptive in nature and hence a number of non-linear filtering technique where introduced. In non-linear filtering technique, median filters and its modifications where used to remove noise but it resulted in blurring of images. Therefore here we propose an adaptive digital signal processing approach that can efficiently remove impulse noise from colour image. This algorithm is based on threshold which is adaptive in nature. This algorithm replaces the pixel only if it is found to be noisy pixel otherwise the original pixel is retained thus it results a better filtering technique when compared to median filters and its modified filters.
Keywords: impulse noise, Adaptive threshold, Noise detection, colour video
AN EMERGING TREND OF FEATURE EXTRACTION METHOD IN VIDEO PROCESSINGcscpconf
Recently the progress in technology and flourishing applications open up new forecast and defy
for the image and video processing community. Compared to still images, video sequences
afford more information about how objects and scenarios change over time. Quality of video is
very significant before applying it to any kind of processing techniques. This paper deals with
two major problems in video processing they are noise reduction and object segmentation on
video frames. The segmentation of objects is performed using foreground segmentation based
and fuzzy c-means clustering segmentation is compared with the proposed method Improvised
fuzzy c – means segmentation based on color. This was applied in the video frame to segment
various objects in the current frame. The proposed technique is a powerful method for image
segmentation and it works for both single and multiple feature data with spatial information.
The experimental result was conducted using various noises and filtering methods to show which is best suited among others and the proposed segmentation approach generates good quality segmented frames.
AN EMERGING TREND OF FEATURE EXTRACTION METHOD IN VIDEO PROCESSINGcscpconf
Recently the progress in technology and flourishing applications open up new forecast and defy
for the image and video processing community. Compared to still images, video sequences
afford more information about how objects and scenarios change over time. Quality of video is
very significant before applying it to any kind of processing techniques. This paper deals with
two major problems in video processing they are noise reduction and object segmentation on
video frames. The segmentation of objects is performed using foreground segmentation based
and fuzzy c-means clustering segmentation is compared with the proposed method Improvised
fuzzy c – means segmentation based on color. This was applied in the video frame to segment
various objects in the current frame. The proposed technique is a powerful method for image
segmentation and it works for both single and multiple feature data with spatial information.
The experimental result was conducted using various noises and filtering methods to show which is best suited among others and the proposed segmentation approach generates good quality segmented frames.
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
A NOVEL ALGORITHM FOR IMAGE DENOISING USING DT-CWT sipij
This paper addresses image enhancement system consisting of image denoising technique based on Dual Tree Complex Wavelet Transform (DT-CWT) . The proposed algorithm at the outset models the noisy remote sensing image (NRSI) statistically by aptly amalgamating the structural features and textures from it. This statistical model is decomposed using DTCWT with Tap-10 or length-10 filter banks based on
Farras wavelet implementation and sub band coefficients are suitably modeled to denoise with a method which is efficiently organized by combining the clustering techniques with soft thresholding - softclustering technique. The clustering techniques classify the noisy and image pixels based on the
neighborhood connected component analysis(CCA), connected pixel analysis and inter-pixel intensity variance (IPIV) and calculate an appropriate threshold value for noise removal. This threshold value is used with soft thresholding technique to denoise the image .Experimental results shows that that the
proposed technique outperforms the conventional and state-of-the-art techniques .It is also evaluated that the denoised images using DTCWT (Dual Tree Complex Wavelet Transform) is better balance between smoothness and accuracy than the DWT.. We used the PSNR (Peak Signal to Noise Ratio) along with
RMSE to assess the quality of denoised images.
Removal of noise is a determining track in
the image rebuilding process, but denoising of image remains a
claiming problem in upcoming analysis accomplice along
image processing. Denoising is utilized to expel the noise from
corrupted image, where as we need to maintain the edges and
other detailed characteristics almost accessible. This noise gets
imported during accretion, transmitting & receiving and
storage & retrieval techniques. In this paper, to discover out
denoised image the modified denoising technique and the local
adaptive wavelet image denoising technique can be obtained.
The input (noisy image) is denoised with the help of modified
denoising technique which is form on wavelet domain as well as
spatial domain along with the local adaptive wavelet image
denoising technique which is form on wavelet domain. In this
paper, I have appraised and analyzed achievements of
modified denoising technique and the local adaptive wavelet
image denoising technique. The above procedures are
contemplated with other based on PSNR between input image
and noisy image and SNR between input image and denoised
image. Simulation and experimental outgrowth for an image
reflects as the mean square error of the local adaptive wavelet
image denoising procedure is less efficient as compare to
modified denoising procedure including the signal to noise
ratio of the local adaptive wavelet image denoising technique is
effective than other approach. Therefore, the image after
denoising has a superior visual effect. In this paper, these two
techniques are materialized with the help of MATLAB for
denoising of image
A Decision tree and Conditional Median Filter Based Denoising for impulse noi...IJERA Editor
Impulse noise is often introduced into images during acquisition and transmission. Even though so many denoising techniques are existing for the removal of impulse noise in images, most of them are high complexity methods and have only low image quality. Here a low cost, low complexity VLSI architecture for the removal of random valued impulse noise in highly corrupted images is introduced. In this technique a decision- tree- based impulse noise detector is used to detect the noisy pixels and an efficient conditional median filter is used to reconstruct the intensity values of noisy pixels. The proposed technique can improve the signal to noise ratio than any other technique.
International Journal of Research in Engineering and Science is an open access peer-reviewed international forum for scientists involved in research to publish quality and refereed papers. Papers reporting original research or experimentally proved review work are welcome. Papers for publication are selected through peer review to ensure originality, relevance, and readability.
Introduction to image processing (or signal processing).
Types of Image processing.
Applications of Image processing.
Applications of Digital image processing.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Comparative analysis of filters and wavelet based thresholding methods for im...csandit
Image Denoising is an important part of diverse image processing and computer vision
problems. The important property of a good image denoising model is that it should completely
remove noise as far as possible as well as preserve edges. One of the most powerful and
perspective approaches in this area is image denoising using discrete wavelet transform (DWT).
In this paper comparative analysis of filters and various wavelet based methods has been
carried out. The simulation results show that wavelet based Bayes shrinkage method
outperforms other methods in terms of peak signal to noise ratio (PSNR) and mean square
error(MSE) and also the comparison of various wavelet families have been discussed in this
paper.
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
A NOVEL ALGORITHM FOR IMAGE DENOISING USING DT-CWT sipij
This paper addresses image enhancement system consisting of image denoising technique based on Dual Tree Complex Wavelet Transform (DT-CWT) . The proposed algorithm at the outset models the noisy remote sensing image (NRSI) statistically by aptly amalgamating the structural features and textures from it. This statistical model is decomposed using DTCWT with Tap-10 or length-10 filter banks based on
Farras wavelet implementation and sub band coefficients are suitably modeled to denoise with a method which is efficiently organized by combining the clustering techniques with soft thresholding - softclustering technique. The clustering techniques classify the noisy and image pixels based on the
neighborhood connected component analysis(CCA), connected pixel analysis and inter-pixel intensity variance (IPIV) and calculate an appropriate threshold value for noise removal. This threshold value is used with soft thresholding technique to denoise the image .Experimental results shows that that the
proposed technique outperforms the conventional and state-of-the-art techniques .It is also evaluated that the denoised images using DTCWT (Dual Tree Complex Wavelet Transform) is better balance between smoothness and accuracy than the DWT.. We used the PSNR (Peak Signal to Noise Ratio) along with
RMSE to assess the quality of denoised images.
Removal of noise is a determining track in
the image rebuilding process, but denoising of image remains a
claiming problem in upcoming analysis accomplice along
image processing. Denoising is utilized to expel the noise from
corrupted image, where as we need to maintain the edges and
other detailed characteristics almost accessible. This noise gets
imported during accretion, transmitting & receiving and
storage & retrieval techniques. In this paper, to discover out
denoised image the modified denoising technique and the local
adaptive wavelet image denoising technique can be obtained.
The input (noisy image) is denoised with the help of modified
denoising technique which is form on wavelet domain as well as
spatial domain along with the local adaptive wavelet image
denoising technique which is form on wavelet domain. In this
paper, I have appraised and analyzed achievements of
modified denoising technique and the local adaptive wavelet
image denoising technique. The above procedures are
contemplated with other based on PSNR between input image
and noisy image and SNR between input image and denoised
image. Simulation and experimental outgrowth for an image
reflects as the mean square error of the local adaptive wavelet
image denoising procedure is less efficient as compare to
modified denoising procedure including the signal to noise
ratio of the local adaptive wavelet image denoising technique is
effective than other approach. Therefore, the image after
denoising has a superior visual effect. In this paper, these two
techniques are materialized with the help of MATLAB for
denoising of image
A Decision tree and Conditional Median Filter Based Denoising for impulse noi...IJERA Editor
Impulse noise is often introduced into images during acquisition and transmission. Even though so many denoising techniques are existing for the removal of impulse noise in images, most of them are high complexity methods and have only low image quality. Here a low cost, low complexity VLSI architecture for the removal of random valued impulse noise in highly corrupted images is introduced. In this technique a decision- tree- based impulse noise detector is used to detect the noisy pixels and an efficient conditional median filter is used to reconstruct the intensity values of noisy pixels. The proposed technique can improve the signal to noise ratio than any other technique.
International Journal of Research in Engineering and Science is an open access peer-reviewed international forum for scientists involved in research to publish quality and refereed papers. Papers reporting original research or experimentally proved review work are welcome. Papers for publication are selected through peer review to ensure originality, relevance, and readability.
Introduction to image processing (or signal processing).
Types of Image processing.
Applications of Image processing.
Applications of Digital image processing.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Comparative analysis of filters and wavelet based thresholding methods for im...csandit
Image Denoising is an important part of diverse image processing and computer vision
problems. The important property of a good image denoising model is that it should completely
remove noise as far as possible as well as preserve edges. One of the most powerful and
perspective approaches in this area is image denoising using discrete wavelet transform (DWT).
In this paper comparative analysis of filters and various wavelet based methods has been
carried out. The simulation results show that wavelet based Bayes shrinkage method
outperforms other methods in terms of peak signal to noise ratio (PSNR) and mean square
error(MSE) and also the comparison of various wavelet families have been discussed in this
paper.
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Nouvelles technologies appliquées à la douleur en gériatrieArnaud Depil-Duval
Journée provençale de gérontologie - Comment les nouvelles technologies peuvent permettre aux seniors d'être mieux pris en charge en termes de douleur.
600 câu trắc nghiệm thể tích khối đa diện, mặt nón, mặt cầu, mặt trụhaic2hv.net
600 câu trắc nghiệm thể tích khối đa diện, mặt nón, mặt cầu, mặt trụ có đáp án chắc chắn sẽ giúp ích cho các em HS luyện thi THPT Quốc giá 2017 rất nhiều.
Tải tài liệu 600 cau trac nghiem the tich khoi da dien, mat non, mat cau, mat tru về máy tại địa chỉ http://ihoc.me/600-cau-trac-nghiem-khoi-da-dien/
352 bài tập trắc nghiệm tọa độ không gianhaic2hv.net
352 bài tập trắc nghiệm tọa độ không gian với 56 trang đi từ các dạng toán đơn giản đến nâng cao do thầy Bảo Vương chia sẻ chắc chắn sẽ hữu ích cho các em.
Tải tài liệu 352 bai tap trac nghiem toa do khong gian về máy tại địa chỉ:
http://ihoc.me/352-bai-tap-trac-nghiem-toa-khong-gian/
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A literature review of various techniques available on Image DenoisingAI Publications
This paper provides a literature review of the different approaches used for image denoising. Various approaches are studied and their results are compared to provide a better understanding of the filters used to de-noise images. It is shown that how a single image is subjected to various denoising techniques and how it can react to those filters. Statistical and mean deviation techniques used by halder et al. (2019)1 and CNN techniques used by zing et al.(2018)2 are reviewed in detail to show how salt and pepper noise can be removed from the images. Each paper that is discussed here has explored the individual approach based on their research and the aim of this paper is to discuss all those approaches in a subsequent manner.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Image denoising is the basic problem in digital image processing. Removing Noise from the image is the main task to denoise the image. Salt & pepper (Impulse) noise and the additive white Gaussian noise and blurredness are the types of noise that occur during transmission and capturing. To remove these types of noise we have many filters like mean filter, median filter, inverse filter, wiener filter. No single one filter can remove both types of noise. So I design a hybrid filter which can be used to denoise these both types of noises from the image.
PERFORMANCE ANALYSIS OF UNSYMMETRICAL TRIMMED MEDIAN AS DETECTOR ON IMAGE NOI...ijistjournal
This Paper Analyze the performance of Unsymmetrical trimmed median, which is used as detector for the detection of impulse noise, Gaussian noise and mixed noise is proposed. The proposed algorithm uses a fixed 3x3 window for the increasing noise densities. The pixels in the current window are arranged in sorting order using a improved snake like sorting algorithm with reduced comparator. The processed pixel is checked for the occurrence of outliers, if the absolute difference between processed pixels is greater than fixed threshold. Under high noise densities the processed pixel is also noisy hence the median is checked using the above procedure. if found true then the pixel is considered as noisy hence the corrupted pixel is replaced by the median of the current processing window. If median is also noisy then replace the corrupted pixel with unsymmetrical trimmed median else if the pixel is termed uncorrupted and left unaltered. The proposed algorithm (PA) is tested on varying detail images for various noises. The proposed algorithm effectively removes the high density fixed value impulse noise, low density random valued impulse noise, low density Gaussian noise and lower proportion of mixed noise. The proposed algorithm is targeted on Xc3e5000-5fg900 FPGA using Xilinx 7.1 compiler version which requires less number of slices, optimum speed and low power when compared to the other median finding architectures.
PERFORMANCE ANALYSIS OF UNSYMMETRICAL TRIMMED MEDIAN AS DETECTOR ON IMAGE NOI...ijistjournal
This Paper Analyze the performance of Unsymmetrical trimmed median, which is used as detector for the detection of impulse noise, Gaussian noise and mixed noise is proposed. The proposed algorithm uses a fixed 3x3 window for the increasing noise densities. The pixels in the current window are arranged in sorting order using a improved snake like sorting algorithm with reduced comparator. The processed pixel is checked for the occurrence of outliers, if the absolute difference between processed pixels is greater than fixed threshold. Under high noise densities the processed pixel is also noisy hence the median is checked using the above procedure. if found true then the pixel is considered as noisy hence the corrupted pixel is replaced by the median of the current processing window. If median is also noisy then replace the corrupted pixel with unsymmetrical trimmed median else if the pixel is termed uncorrupted and left unaltered. The proposed algorithm (PA) is tested on varying detail images for various noises. The proposed algorithm effectively removes the high density fixed value impulse noise, low density random valued impulse noise, low density Gaussian noise and lower proportion of mixed noise. The proposed algorithm is targeted on Xc3e5000-5fg900 FPGA using Xilinx 7.1 compiler version which requires less number of slices, optimum speed and low power when compared to the other median finding architectures.
Performance analysis of image filtering algorithms for mri imageseSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Performance of Various Order Statistics Filters in Impulse and Mixed Noise Re...sipij
Remote sensing images (ranges from satellite to seismic) are affected by number of noises like interference, impulse and speckle noises. Image denoising is one of the traditional problems in digital image processing, which plays vital role as a pre-processing step in number of image and video applications. Image denoising still remains a challenging research area for researchers because noise
removal introduces artifacts and causes blurring of the images. This study is done with the intension of designing a best algorithm for impulsive noise reduction in an industrial environment. A review of the typical impulsive noise reduction systems which are based on order statistics are done and particularized for the described situation. Finally, computational aspects are analyzed in terms of PSNR values and some solutions are proposed.
Mechanical properties of hybrid fiber reinforced concrete for pavementseSAT Journals
Abstract
The effect of addition of mono fibers and hybrid fibers on the mechanical properties of concrete mixture is studied in the present
investigation. Steel fibers of 1% and polypropylene fibers 0.036% were added individually to the concrete mixture as mono fibers and
then they were added together to form a hybrid fiber reinforced concrete. Mechanical properties such as compressive, split tensile and
flexural strength were determined. The results show that hybrid fibers improve the compressive strength marginally as compared to
mono fibers. Whereas, hybridization improves split tensile strength and flexural strength noticeably.
Keywords:-Hybridization, mono fibers, steel fiber, polypropylene fiber, Improvement in mechanical properties.
Material management in construction – a case studyeSAT Journals
Abstract
The objective of the present study is to understand about all the problems occurring in the company because of improper application
of material management. In construction project operation, often there is a project cost variance in terms of the material, equipments,
manpower, subcontractor, overhead cost, and general condition. Material is the main component in construction projects. Therefore,
if the material management is not properly managed it will create a project cost variance. Project cost can be controlled by taking
corrective actions towards the cost variance. Therefore a methodology is used to diagnose and evaluate the procurement process
involved in material management and launch a continuous improvement was developed and applied. A thorough study was carried
out along with study of cases, surveys and interviews to professionals involved in this area. As a result, a methodology for diagnosis
and improvement was proposed and tested in selected projects. The results obtained show that the main problem of procurement is
related to schedule delays and lack of specified quality for the project. To prevent this situation it is often necessary to dedicate
important resources like money, personnel, time, etc. To monitor and control the process. A great potential for improvement was
detected if state of the art technologies such as, electronic mail, electronic data interchange (EDI), and analysis were applied to the
procurement process. These helped to eliminate the root causes for many types of problems that were detected.
Managing drought short term strategies in semi arid regions a case studyeSAT Journals
Abstract
Drought management needs multidisciplinary action. Interdisciplinary efforts among the experts in various fields of the droughts
prone areas are helpful to achieve tangible and permanent solution for this recurring problem. The Gulbarga district having the total
area around 16, 240 sq.km, and accounts 8.45 per cent of the Karnataka state area. The district has been situated with latitude 17º 19'
60" North and longitude of 76 º 49' 60" east. The district is situated entirely on the Deccan plateau positioned at a height of 300 to
750 m above MSL. Sub-tropical, semi-arid type is one among the drought prone districts of Karnataka State. The drought
management is very important for a district like Gulbarga. In this paper various short term strategies are discussed to mitigate the
drought condition in the district.
Keywords: Drought, South-West monsoon, Semi-Arid, Rainfall, Strategies etc.
Life cycle cost analysis of overlay for an urban road in bangaloreeSAT Journals
Abstract
Pavements are subjected to severe condition of stresses and weathering effects from the day they are constructed and opened to traffic
mainly due to its fatigue behavior and environmental effects. Therefore, pavement rehabilitation is one of the most important
components of entire road systems. This paper highlights the design of concrete pavement with added mono fibers like polypropylene,
steel and hybrid fibres for a widened portion of existing concrete pavement and various overlay alternatives for an existing
bituminous pavement in an urban road in Bangalore. Along with this, Life cycle cost analyses at these sections are done by Net
Present Value (NPV) method to identify the most feasible option. The results show that though the initial cost of construction of
concrete overlay is high, over a period of time it prove to be better than the bituminous overlay considering the whole life cycle cost.
The economic analysis also indicates that, out of the three fibre options, hybrid reinforced concrete would be economical without
compromising the performance of the pavement.
Keywords: - Fatigue, Life cycle cost analysis, Net Present Value method, Overlay, Rehabilitation
Laboratory studies of dense bituminous mixes ii with reclaimed asphalt materialseSAT Journals
Abstract
The issue of growing demand on our nation’s roadways over that past couple of decades, decreasing budgetary funds, and the need to
provide a safe, efficient, and cost effective roadway system has led to a dramatic increase in the need to rehabilitate our existing
pavements and the issue of building sustainable road infrastructure in India. With these emergency of the mentioned needs and this
are today’s burning issue and has become the purpose of the study.
In the present study, the samples of existing bituminous layer materials were collected from NH-48(Devahalli to Hassan) site.The
mixtures were designed by Marshall Method as per Asphalt institute (MS-II) at 20% and 30% Reclaimed Asphalt Pavement (RAP).
RAP material was blended with virgin aggregate such that all specimens tested for the, Dense Bituminous Macadam-II (DBM-II)
gradation as per Ministry of Roads, Transport, and Highways (MoRT&H) and cost analysis were carried out to know the economics.
Laboratory results and analysis showed the use of recycled materials showed significant variability in Marshall Stability, and the
variability increased with the increase in RAP content. The saving can be realized from utilization of recycled materials as per the
methodology, the reduction in the total cost is 19%, 30%, comparing with the virgin mixes.
Keywords: Reclaimed Asphalt Pavement, Marshall Stability, MS-II, Dense Bituminous Macadam-II
Laboratory investigation of expansive soil stabilized with natural inorganic ...eSAT Journals
Abstract
Soil stabilization has proven to be one of the oldest techniques to improve the soil properties. Literature review conducted revealed
that uses of natural inorganic stabilizers are found to be one of the best options for soil stabilization. In this regard an attempt has
been made to evaluate the influence of RBI-81 stabilizer on properties of black cotton soil through laboratory investigations. Black
cotton soil with varying percentages of RBI-81 viz., 0, 0.5, 1, 1.5, 2, and 2.5 percent were studied for moisture density relationships
and strength behaviour of soils. Also the effect of curing period was evaluated as literature review clearly emphasized the strength
gain of soils stabilized with RBI-81 over a period of time. The results obtained shows that the unconfined compressive strength of
specimens treated with RBI-81 increased approximately by 250% for a curing period of 28 days as compared to virgin soil. Further
the CBR value improved approximately by 400%. The studies indicated an increasing trend for soil strength behaviour with
increasing percentage of RBI-81 suggesting its potential applications in soil stabilization.
Influence of reinforcement on the behavior of hollow concrete block masonry p...eSAT Journals
Abstract
Reinforced masonry was developed to exploit the strength potential of masonry and to solve its lack of tensile strength. Experimental
and analytical studies have been carried out to investigate the effect of reinforcement on the behavior of hollow concrete block
masonry prisms under compression and to predict ultimate failure compressive strength. In the numerical program, three dimensional
non-linear finite elements (FE) model based on the micro-modeling approach is developed for both unreinforced and reinforced
masonry prisms using ANSYS (14.5). The proposed FE model uses multi-linear stress-strain relationships to model the non-linear
behavior of hollow concrete block, mortar, and grout. Willam-Warnke’s five parameter failure theory has been adopted to model the
failure of masonry materials. The comparison of the numerical and experimental results indicates that the FE models can successfully
capture the highly nonlinear behavior of the physical specimens and accurately predict their strength and failure mechanisms.
Keywords: Structural masonry, Hollow concrete block prism, grout, Compression failure, Finite element method,
Numerical modeling.
Influence of compaction energy on soil stabilized with chemical stabilizereSAT Journals
Abstract
Increase in traffic along with heavier magnitude of wheel loads cause rapid deterioration in pavements. There is a need to improve
density, strength of soil subgrade and other pavement layers. In this study an attempt is made to improve the properties of locally
available loamy soil using twin approaches viz., i) increasing the compaction of soil and ii) treating the soil with chemical stabilizer.
Laboratory studies are carried out on both untreated and treated soil samples compacted by different compaction efforts. Studies
show that increase in compaction effort results in increase in density of soil. However in soil treated with chemical stabilizer, rate of
increase in density is not significant. The soil treated with chemical stabilizer exhibits improvement in both strength and performance
properties.
Keywords: compaction, density, subgradestabilization, resilient modulus
Geographical information system (gis) for water resources managementeSAT Journals
Abstract
Water resources projects are inherited with overlapping and at times conflicting objectives. These projects are often of varied sizes
ranging from major projects with command areas of millions of hectares to very small projects implemented at the local level. Thus,
in all these projects there is seldom proper coordination which is essential for ensuring collective sustainability.
Integrated watershed development and management is the accepted answer but in turn requires a comprehensive framework that can
enable planning process involving all the stakeholders at different levels and scales is compulsory. Such a unified hydrological
framework is essential to evaluate the cause and effect of all the proposed actions within the drainage basins.
The present paper describes a hydrological framework developed in the form of a Hydrologic Information System (HIS) which is
intended to meet the specific information needs of the various line departments of a typical State connected with water related aspects.
The HIS consist of a hydrologic information database coupled with tools for collating primary and secondary data and tools for
analyzing and visualizing the data and information. The HIS also incorporates hydrological model base for indirect assessment of
various entities of water balance in space and time. The framework would be maintained and updated to reflect fully the most
accurate ground truth data and the infrastructure requirements for planning and management.
Keywords: Hydrological Information System (HIS); WebGIS; Data Model; Web Mapping Services
Forest type mapping of bidar forest division, karnataka using geoinformatics ...eSAT Journals
Abstract
The study demonstrate the potentiality of satellite remote sensing technique for the generation of baseline information on forest types
including tree plantation details in Bidar forest division, Karnataka covering an area of 5814.60Sq.Kms. The Total Area of Bidar
forest division is 5814Sq.Kms analysis of the satellite data in the study area reveals that about 84% of the total area is Covered by
crop land, 1.778% of the area is covered by dry deciduous forest, 1.38 % of mixed plantation, which is very threatening to the
environmental stability of the forest, future plantation site has been mapped. With the use of latest Geo-informatics technology proper
and exact condition of the trees can be observed and necessary precautions can be taken for future plantation works in an appropriate
manner
Keywords:-RS, GIS, GPS, Forest Type, Tree Plantation
Factors influencing compressive strength of geopolymer concreteeSAT Journals
Abstract
To study effects of several factors on the properties of fly ash based geopolymer concrete on the compressive strength and also the
cost comparison with the normal concrete. The test variables were molarities of sodium hydroxide(NaOH) 8M,14M and 16M, ratio of
NaOH to sodium silicate (Na2SiO3) 1, 1.5, 2 and 2.5, alkaline liquid to fly ash ratio 0.35 and 0.40 and replacement of water in
Na2SiO3 solution by 10%, 20% and 30% were used in the present study. The test results indicated that the highest compressive
strength 54 MPa was observed for 16M of NaOH, ratio of NaOH to Na2SiO3 2.5 and alkaline liquid to fly ash ratio of 0.35. Lowest
compressive strength of 27 MPa was observed for 8M of NaOH, ratio of NaOH to Na2SiO3 is 1 and alkaline liquid to fly ash ratio of
0.40. Alkaline liquid to fly ash ratio of 0.35, water replacement of 10% and 30% for 8 and 16 molarity of NaOH and has resulted in
compressive strength of 36 MPa and 20 MPa respectively. Superplasticiser dosage of 2 % by weight of fly ash has given higher
strength in all cases.
Keywords: compressive strength, alkaline liquid, fly ash
Experimental investigation on circular hollow steel columns in filled with li...eSAT Journals
Abstract
Composite Circular hollow Steel tubes with and without GFRP infill for three different grades of Light weight concrete are tested for
ultimate load capacity and axial shortening , under Cyclic loading. Steel tubes are compared for different lengths, cross sections and
thickness. Specimens were tested separately after adopting Taguchi’s L9 (Latin Squares) Orthogonal array in order to save the initial
experimental cost on number of specimens and experimental duration. Analysis was carried out using ANN (Artificial Neural
Network) technique with the assistance of Mini Tab- a statistical soft tool. Comparison for predicted, experimental & ANN output is
obtained from linear regression plots. From this research study, it can be concluded that *Cross sectional area of steel tube has most
significant effect on ultimate load carrying capacity, *as length of steel tube increased- load carrying capacity decreased & *ANN
modeling predicted acceptable results. Thus ANN tool can be utilized for predicting ultimate load carrying capacity for composite
columns.
Keywords: Light weight concrete, GFRP, Artificial Neural Network, Linear Regression, Back propagation, orthogonal
Array, Latin Squares
Experimental behavior of circular hsscfrc filled steel tubular columns under ...eSAT Journals
Abstract
This paper presents an outlook on experimental behavior and a comparison with predicted formula on the behaviour of circular
concentrically loaded self-consolidating fibre reinforced concrete filled steel tube columns (HSSCFRC). Forty-five specimens were
tested. The main parameters varied in the tests are: (1) percentage of fiber (2) tube diameter or width to wall thickness ratio (D/t
from 15 to 25) (3) L/d ratio from 2.97 to 7.04 the results from these predictions were compared with the experimental data. The
experimental results) were also validated in this study.
Keywords: Self-compacting concrete; Concrete-filled steel tube; axial load behavior; Ultimate capacity.
Evaluation of punching shear in flat slabseSAT Journals
Abstract
Flat-slab construction has been widely used in construction today because of many advantages that it offers. The basic philosophy in
the design of flat slab is to consider only gravity forces; this method ignores the effect of punching shear due to unbalanced moments
at the slab column junction which is critical. An attempt has been made to generate generalized design sheets which accounts both
punching shear due to gravity loads and unbalanced moments for cases (a) interior column; (b) edge column (bending perpendicular
to shorter edge); (c) edge column (bending parallel to shorter edge); (d) corner column. These design sheets are prepared as per
codal provisions of IS 456-2000. These design sheets will be helpful in calculating the shear reinforcement to be provided at the
critical section which is ignored in many design offices. Apart from its usefulness in evaluating punching shear and the necessary
shear reinforcement, the design sheets developed will enable the designer to fix the depth of flat slab during the initial phase of the
design.
Keywords: Flat slabs, punching shear, unbalanced moment.
Evaluation of performance of intake tower dam for recent earthquake in indiaeSAT Journals
Abstract
Intake towers are typically tall, hollow, reinforced concrete structures and form entrance to reservoir outlet works. A parametric
study on dynamic behavior of circular cylindrical towers can be carried out to study the effect of depth of submergence, wall thickness
and slenderness ratio, and also effect on tower considering dynamic analysis for time history function of different soil condition and
by Goyal and Chopra accounting interaction effects of added hydrodynamic mass of surrounding and inside water in intake tower of
dam
Key words: Hydrodynamic mass, Depth of submergence, Reservoir, Time history analysis,
Evaluation of operational efficiency of urban road network using travel time ...eSAT Journals
Abstract
Efficiency of the road network system is analyzed by travel time reliability measures. The study overlooks on an important measure of
travel time reliability and prioritizing Tiruchirappalli road network. Traffic volume and travel time were collected using license plate
matching method. Travel time measures were estimated from average travel time and 95th travel time. Effect of non-motorized vehicle
on efficiency of road system was evaluated. Relation between buffer time index and traffic volume was created. Travel time model has
been developed and travel time measure was validated. Then service quality of road sections in network were graded based on
travel time reliability measures.
Keywords: Buffer Time Index (BTI); Average Travel Time (ATT); Travel Time Reliability (TTR); Buffer Time (BT).
Estimation of surface runoff in nallur amanikere watershed using scs cn methodeSAT Journals
Abstract
The development of watershed aims at productive utilization of all the available natural resources in the entire area extending from
ridge line to stream outlet. The per capita availability of land for cultivation has been decreasing over the years. Therefore, water and
the related land resources must be developed, utilized and managed in an integrated and comprehensive manner. Remote sensing and
GIS techniques are being increasingly used for planning, management and development of natural resources. The study area, Nallur
Amanikere watershed geographically lies between 110 38’ and 110 52’ N latitude and 760 30’ and 760 50’ E longitude with an area of
415.68 Sq. km. The thematic layers such as land use/land cover and soil maps were derived from remotely sensed data and overlayed
through ArcGIS software to assign the curve number on polygon wise. The daily rainfall data of six rain gauge stations in and around
the watershed (2001-2011) was used to estimate the daily runoff from the watershed using Soil Conservation Service - Curve Number
(SCS-CN) method. The runoff estimated from the SCS-CN model was then used to know the variation of runoff potential with different
land use/land cover and with different soil conditions.
Keywords: Watershed, Nallur watershed, Surface runoff, Rainfall-Runoff, SCS-CN, Remote Sensing, GIS.
Estimation of morphometric parameters and runoff using rs & gis techniqueseSAT Journals
Abstract
Land and water are the two vital natural resources, the optimal management of these resources with minimum adverse environmental
impact are essential not only for sustainable development but also for human survival. Satellite remote sensing with geographic
information system has a pragmatic approach to map and generate spatial input layers of predicting response behavior and yield of
watershed. Hence, in the present study an attempt has been made to understand the hydrological process of the catchment at the
watershed level by drawing the inferences from moprhometric analysis and runoff. The study area chosen for the present study is
Yagachi catchment situated in Chickamaglur and Hassan district lies geographically at a longitude 75⁰52’08.77”E and
13⁰10’50.77”N latitude. It covers an area of 559.493 Sq.km. Morphometric analysis is carried out to estimate morphometric
parameters at Micro-watershed to understand the hydrological response of the catchment at the Micro-watershed level. Daily runoff
is estimated using USDA SCS curve number model for a period of 10 years from 2001 to 2010. The rainfall runoff relationship of the
study shows there is a positive correlation.
Keywords: morphometric analysis, runoff, remote sensing and GIS, SCS - method
-
Effect of variation of plastic hinge length on the results of non linear anal...eSAT Journals
Abstract The nonlinear Static procedure also well known as pushover analysis is method where in monotonically increasing loads are applied to the structure till the structure is unable to resist any further load. It is a popular tool for seismic performance evaluation of existing and new structures. In literature lot of research has been carried out on conventional pushover analysis and after knowing deficiency efforts have been made to improve it. But actual test results to verify the analytically obtained pushover results are rarely available. It has been found that some amount of variation is always expected to exist in seismic demand prediction of pushover analysis. Initial study is carried out by considering user defined hinge properties and default hinge length. Attempt is being made to assess the variation of pushover analysis results by considering user defined hinge properties and various hinge length formulations available in literature and results compared with experimentally obtained results based on test carried out on a G+2 storied RCC framed structure. For the present study two geometric models viz bare frame and rigid frame model is considered and it is found that the results of pushover analysis are very sensitive to geometric model and hinge length adopted. Keywords: Pushover analysis, Base shear, Displacement, hinge length, moment curvature analysis
Effect of use of recycled materials on indirect tensile strength of asphalt c...eSAT Journals
Abstract
Depletion of natural resources and aggregate quarries for the road construction is a serious problem to procure materials. Hence
recycling or reuse of material is beneficial. On emphasizing development in sustainable construction in the present era, recycling of
asphalt pavements is one of the effective and proven rehabilitation processes. For the laboratory investigations reclaimed asphalt
pavement (RAP) from NH-4 and crumb rubber modified binder (CRMB-55) was used. Foundry waste was used as a replacement to
conventional filler. Laboratory tests were conducted on asphalt concrete mixes with 30, 40, 50, and 60 percent replacement with RAP.
These test results were compared with conventional mixes and asphalt concrete mixes with complete binder extracted RAP
aggregates. Mix design was carried out by Marshall Method. The Marshall Tests indicated highest stability values for asphalt
concrete (AC) mixes with 60% RAP. The optimum binder content (OBC) decreased with increased in RAP in AC mixes. The Indirect
Tensile Strength (ITS) for AC mixes with RAP also was found to be higher when compared to conventional AC mixes at 300C.
Keywords: Reclaimed asphalt pavement, Foundry waste, Recycling, Marshall Stability, Indirect tensile strength.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Planning Of Procurement o different goods and services
Adaptive denoising technique for colour images
1. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
_______________________________________________________________________________________
Volume: 04 Issue: 03 | Mar-2015, Available @ http://www.ijret.org 59
ADAPTIVE DENOISING TECHNIQUE FOR COLOUR IMAGES
S.R.Preethi1
, P.Latha2
1
Assistant Professor, Department of ECE, Valliammai Engineering College
2
Associate Professor, Department of ECE, ST.Joseph’s College Of Engineering
Abstract
In digital image processing noise removal or noise filtering plays an important role, because for meaningful and useful
processing images should not be corrupted by noises. In recent years, high quality televisions have become very popular but noise
often affects TV broadcasts. Impulse noise corrupts the video during transmission and acquisition of signals. A number of
denoising techniques have been introduced to remove impulse noise from images . Linear noise filtering technique does not work
well when the noise is non-adaptive in nature and hence a number of non-linear filtering technique where introduced. In non-
linear filtering technique, median filters and its modifications where used to remove noise but it resulted in blurring of images.
Therefore here we propose an adaptive digital signal processing approach that can efficiently remove impulse noise from colour
image. This algorithm is based on threshold which is adaptive in nature. This algorithm replaces the pixel only if it is found to be
noisy pixel otherwise the original pixel is retained thus it results a better filtering technique when compared to median filters and
its modified filters.
Keywords: impulse noise, Adaptive threshold, Noise detection, colour video
-------------------------------------------------------------------***-------------------------------------------------------------------
1. INTRODUCTION
Digital image processing is used widely in many important
fields such as medical imaging for diagnosis of diseases,
face recognition for security purposes and so on. Hence it is
necessary that image and video should be noise free for
various processing. Often the image and video are corrupted
by impulse noise. Impulse noise is also known as spike
noise or salt and pepper noise. Impulse noise results in dark
pixels in bright regions and bright pixels in dark regions.
Impulse noise is mainly caused during analog to digital
conversion, pre-processing, compressing of images and
videos, transmission of signals and acquisition of signals
(i.e.) while broadcasting of signals, storing and retrieval of
images and videos. Impulse noise is generally of two types
fixed value impulse noise and random value impulse noise.
In fixed value impulse noise the noisy pixel will have
minimum or maximum gray level value, thus it introduce
grey level value 0 (salt) and gray level value 255 (pepper) to
the original image and hence impulse noise is known as salt
and pepper noise. In random value impulse noise the noisy
pixel will have random value of gray level value. Impulse
noise is generally characterized by replacing some portion of
pixels in image by noisy pixels and leaving the remaining
part of pixels in the image unchanged.
In section II the related works of various impulse noise
removing techniques are discussed. In section III,
disadvantages of existing techniques are given. In section
IV, the adaptive threshold algorithm is explained in detail.
The implementation results are given in section V. In section
VI, the results and comparisons are given. The conclusion is
presented in section VII and future works is discussed in
section VIII.
2. RELATED WORKS
2.1 Impulse Noise Removal using Mean Filters:
Mean filter is a linear filter. In mean filter the pixel is
replaced by mean of neighbourhood pixel. Mean filter is a
linear filter and it is suitable for removing Gaussian noise
from images
2.2 Impulse Noise Removal using Median Filters
and Weighted Median Filter[1]:
In median filter the pixel in original image is replaced by
median of neighbourhood pixels. Median filter is a
smoothening filter and thus it preserves the edges. Median
filter preserves the position of boundaries in an image and
thus makes the image useful for visual enhancement and
various measurements. As a extension of median filters
there came Weighted Median (WM) filter. WM filter gives
more weightage to some selected pixels. In this filter each
window position is assigned a weight and then the sample
inside filter window is duplicated to number of
corresponding weight. Median values of neighbourhood
pixel from the increased list of samples gives the WM
output.
2.3 Analysis of Centre Weighted Filter [1]:
Centre Weighted Median (CWM) filter is a sub-class of
Weighted Median filter.CWM is one of important WM filter
because it is easy to implement and is best understood
theoretically compared to many WM filter.CWM filter has
useful properties such as noise preserving and suppressing
of noises especially heavy-tailed noise. In CWM filtering
technique more weight is given only to the centre value of
window and thus making CWM filer easier to design and
implement than other WM filters.
2. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
_______________________________________________________________________________________
Volume: 04 Issue: 03 | Mar-2015, Available @ http://www.ijret.org 60
2.4 Impulse Noise removal by using Simple
Adaptive Median Filter [2]:
Simple Adaptive Median (SAM) filter is used to remove
impulse noise.SAM is a hybrid of adaptive median filter and
switching median filter. In SAM filtering technique noisy
pixels and noise free pixels are identified and noise free
pixels are sent to the output without any modifications
where as noisy pixel values are replaced by values from
already precomputed look-up table and hence reducing the
execution time.SAM filter uses square filters, this filter is
further extended to Circular Simple Adaptive Filter
(CSAM)where CSAM uses circular filter. Thus CSAM
becomes more efficient than SAM as errors associated with
square kernels are minimized. This SAM and CSAM can
further be extended to Weighted Simple Adaptive Median
(WSAM) filter and Weighted Circular Simple Adaptive
Median (WCSAM) filter by adding weights to those filters.
2.5 Impulse Noise Removal using Fuzzy Logic [3]:
In this filtering technique 0’s and 255’s are removed from
the image and the median of the neighbourhood pixel is
found and it is used instead of noisy pixel. This technique is
based on fuzzy logic.
2.6 Impulse Noise removal using Image Denoising
Technique [4]:
In this paper Simple Edge Preserved Denoising (SEPD) and
(Reduced Simple Edge Preserved Denoising(RSEPD)
techniques have been employed to locate the edge of noisy
pixel. Here in this technique a pixel is checked whether it is
noisy pixel or noise free pixel, if it is a noisy pixel then
SEPD locates if directional edge is existing in the current
noisy pixel and it replaces noisy pixel with determined
reconstructed value. In SEPD twelve edge differences are
considered to detect the proper edge. When more edges are
considered the computational complexity is increased by
using this technique. Hence to further reduce the
computational complexity RSEPD technique is used. This
RSEPD technique uses only three edge differences to detect
proper edge. But the image produced is of lower quality
compared to SEPD but it has much reduced complexity
when compared to SEPD.
3. DISADVANTAGES OF PRESENT SYSTEMS
Mean filters is not suitable for removing impulse noise from
images . Hence median filters are found to be capable of
removing impulse noise. Median filters often remove
desirable details and blurs the image. Further, median filters
can remove noise only if noisy pixels occupy less than one
half of neighbourhood area. It has high computational cost.
Though WM and CWM can overcome the disadvantages of
median filter they are applied uniformly without considering
whether the pixel is noisy or noise free. The disadvantages
of WM and CWM filter are overcome by SAM filter but
here in SAM filter the noisy pixel value is replaced by value
from look-up table without checking if it is correct value by
considering the neighbourhood pixels. In noise removal
technique using fuzzy logic 0’s and 255’s are removed
without considering them if it is noisy or noise free. Further
this fuzzy technique can be used to remove impulse noise
from gray scale image only. In denoising techniques such as
SEPD and RSEPD there is need to compute three to twelve
edge differences thus increasing the time complexity.
4. PROPOSED WORK
In this chapter we propose an efficient noise removal
algorithm using adaptive digital signal approach to remove
impulse noise which have fixed and random value from gray
scale images and from colour images . Here we use
threshold whose value is adaptive in nature. The proposed
algorithm technique is splitted into two parts which can be
used to remove impulse noise. The first part involves
detecting if pixel is noisy or noise-free.the second part
involves replacing the detected noise free pixel by pixel
value found out using adaptive threshold.
4.1 Adaptive Threshold Algorithm
The proposed adaptive threshold algorithm has two parts
1. Noise Detection
2. Adaptive Filter
4.2 Noise Detection
Consider a 3x3 image in which there are 9 pixels as shown
below
fi-1,j-1 fi-1,j fi-1,j+1
fi,j-1 fi,j fi,j+1
fi+1,j-1 fi+1,j fi+1,j+1
Fig 1 3x3 window
In the Fig 1 fi,j is currently processed pixel then pixels fi-1,j-
1,fi-1,j,fi-1,j+1 and fi,j+1 are already processed pixel and thus the
mean of done-filtered pixels around the currently processed
pixel is computed and stored in variable DMi,j using
equation (1)
DMi,j= (1)
Aside from DMi,j we have another parameter YMi.j. The
pixels fi,j+1,fi+1,j-1,fi+1,j and fi+1,j+1 are pixels which should be
processed. The mean of pixels that have not yet been
processed is found out and stored in variable YMi,j which is
given in equation(2)
YMi,= (2)
DMi,j and YMi,j offers local mean for the processed pixel.If
currently processed pixel is not corrupted by noise then the
pixel value is close to DMi,j or YMi,j.
3. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
_______________________________________________________________________________________
Volume: 04 Issue: 03 | Mar-2015, Available @ http://www.ijret.org 61
Thus noise detection can be expressed as
if|fi,j- >Th fi,j is corrupted
fi,corrupted pixel
otherwise, fi,j is a noise free (3)
where Th is noise threshold.
From equation (3) one can decide if the currently processed
pixel is corrupted by noise or it is a noise free pixel. Based
on this result non-linear filtering can be done.
4.3 Non-Filtering Technique
Based on the result of noise detection nonlinear filtering
procedure is used to remove noise which is given by
fi,j
^
= DMi,j, fi,j is corrupted pixel
fi,j
^
= fi,j, fi,j is noise-free pixel (4)
Thus the corrupted pixels are replaced by average of
previously filtered pixels and the noise free pixels are kept
as it is. This filtering technique blurs the edges and hence
edge detection (ED) is adopted to improve the filtering
quality. Thus for filter to work efficiently one has to see if
processed pixel belongs to edge or noisy pixel in nonsmooth
regions. If the decision is incorrect, either image edges
become blurred or noise cannot be removed and also filtered
error will be propagated to next processing pixel due to
recursive nature of algorithm. Hence accurate computation
of edge parameter is needed. Edge computation for noisy
pixel is tedious as some of the edges are already destroyed
and this gives erratic result due to noisy pixels. Therefore to
avoid noisy pixel inclusion horizontal edge factor is
adaptively computed using previously processed pixels. The
horizontal ED parameter is given in equation (5)
ED= (5)
Where pixels fi-1,j-mand fi,j-m have already been filtered. Thus
by considering only horizontal ED the computational
complexity is reduced.
.
4.4 Threshold Computation
Depending on ED value dynamically adjust noise threshold
Th to reduce edge distortions. Noise Ratio (NR) is computed
using Noise Counter (NC). The NC increases by one if noisy
pixel is found. Depending on ED and NC parameters, the
adaptive function F for noise threshold can be given by
equation (6)
Th = F(ED,NC)=k1+ k2xED – k3xNC (6)
Here k1~k3are constants. NCt-1is the noise count found from
the previous processed frame.
4.5 Architecture Of Noise Reducton Processor
Fig 2 System architecture of noise reduction processor
Fig 2 shows the system architecture of noise reduction
processor. Here there are three scanning lines are given as
input which are used for data reallocation .Then parameters
such as DM, YM and local mean are computed. Edge
detection parameter ED is calculated and NR is calculated
from previously processed image. These two parameters are
used for computation of noise threshold Th. Using these
parameters noise detection is performed to check if pixel is
noisy or noise free and based on this result non-linear
filtering is done.
Fig.3 Functional diagram of Noise Detection
In Fig 3 the DM and YM values are averaged by right shift
operations and then it is subtracted from processed pixel to
get the absolute value. This absolute value and adaptive
threshold value are compared to check if current pixel is
noisy or noise free.
4. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
_______________________________________________________________________________________
Volume: 04 Issue: 03 | Mar-2015, Available @ http://www.ijret.org 62
5. SIMULATION USING MATLAB:
Fig 4 Input image
Fig 5 Output image using adaptive denoising technique for
10% noise density
Fig 6 Output image using adaptive denoising technique for
25% noise density
Fig 7 Output image using adaptive denoising technique for
50% noise density
Fig 8 Output image using adaptive denoising technique for
80% noise density
The fig 4 is given as the input image.Then impulse noise is
added with various noise density to input image. The Fig 5
shows the output image for noise density of 10%. The Fig 6
shows the output image for noise density of 25%. The Fig 7
shows the output image for noise density of 50%. The Fig 8
shows the output image for noise density of 80%.
6. RESULTS AND DISCUSSIONS
The quality of sequence of output frames can be measured
using PSNR and MSE values. PSNR ratio is often used as a
quality measurement between the original and noise
removed image. The higher the PSNR, the better the quality
of the compressed, or reconstructed image. The MSE
represents the cumulative squared error between the
compressed and the original image, whereas PSNR
represents a measure of the peak error. The lower the value
of MSE, the lower the error.
5. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
_______________________________________________________________________________________
Volume: 04 Issue: 03 | Mar-2015, Available @ http://www.ijret.org 63
Peak Signal to Noise Ratio (PSNR):
It is measured in decibel (dB) and it is defined as:
MSE =
PSNR = 10log10 x
Where
X - Original Image.
R - Restored Image
M x N - Size of Image.
MAE - Mean Absolute Error.
MSE - Mean Square Error.
PSNR - Peak Signal to Noise Ratio.
The higher the PNSR in the restored image the better is its
quality. Based on the values of PSNR a graph is plotted
between noise density in X axis and PSNR values in Y axis
and is shown in Fig 9.
Fig 9 Noise density Vs PSNR graph
From Fig 9 it can be seen that PSNR values of adaptive
threshold algorithm are high in 50% and 80% noise density
when compared to PSNR values of median filters and
adaptive threshold algorithm results in efficient removal of
impulse noise.
For colour image processing three noise filter processing
have to be done to filter red-green-blue (RGB) components
for each pixel directly. However, in order to reduce
computational time we can convert RGB image into YUV
domain. Since Y is luminance signal, the noise will clearly
appear in colour image if Y is corrupted signal. For image
noise filtering, Y signal processing is much more important
than U and V signals. Hence only Y signal is filtered with
one noise filtering process.
7. CONCLUSION
In this paper a high-performance algorithm for removing
impulse noise from colour image has been presented. This
adaptive denoising technique is suitable for efficient
removal of impulse noise in high noise environment. This
algorithm provides better and fast filtering of noise than
conventional and improved versions of median filters.This
can be futher developed and implemented in resonfigurable
system on chip to remove impulse noise.
REFERENCES
[1]. Tong Sun, Moncef Galbouj and Yrjo Neuvo,”Analysis
of two dimensional centre weighted median filter,”
Multidimensional systems and signal processing, page
no.159-172, January 1994.
[2]. Vipul D.Punjabi,Shiv Kumar and Neetesh Gupta,”A
survey on removal of impulse noise from images by
reducing execution time,”World Journal of Science and
Technology 134-136,April 2012.
[3]. Jasdeep Kaur, Pawandeep Kaur and Preetinder
Kaur,”Review of impulse noise reduction techniques using
fuzzy logic for image processing,” International Journal of
Engineering and Research Technology, vol no.01, July
2012.
[4]. P.Kalaiselva ,S.Vasantha,”VLSI implementation of
impulse noise removal using image denoising
technique,”IJCE,vol.02,no.02,March2012.
[5]. S.-C. Hsia, “Parallel VLSI design for a real-time video-
impulse noise-reduction processor,” IEEE Trans.Very
Large Scale Integr.(VLSI) Syst., vol. 11, no.4,pp. 651–658,
Aug. 2003
[6]. G.Sreedevi,Dr.M.ZKuria,”FPGA based denoising
technique for efficient removal of impulse noise in
images,”IEEE Trans.
[7]. Eduardo Abreu, Michael Lightstone, Sanjit.K.Mitra and
Kaoru Arakawa , ”A New efficient approach for removal of
0
5
10
15
20
25
30
35
10% 25% 50% 80%
PSNRvalues
PSNR of median filter
function
PSNR of adaptive threhold
6. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
_______________________________________________________________________________________
Volume: 04 Issue: 03 | Mar-2015, Available @ http://www.ijret.org 64
impulse noise from highly corrupted images,”IEEE
Transactions on Image Processing,vol no.05, June 1996.
[8]. ManoharAnnappa Koli,”Review of impulse noise
reduction techniques,”International Journal of Computer
Science and Engineering, vol no. 04,February 2012.
[9]. I. Aizenberg and C. Butakoff, “Effective impulse
detector based on rank-order criteria,” IEEE Signal Process.
Lett., vol. 11, no. 3, pp. 363–366, Mar. 2004.
[10]. W. Luo, “Efficient removal of impulse noise from
digital images,” IEEE Trans. Consum. Electron., vol. 52, pp.
523–527, May 2006.
[11]. P. Latha, Dr. M. A. Bhagyaveni, and S. R. Preethi,
,”Efficient Removal Of Impulse Noise From Video Using
Adaptive Threshold Algorithm”, Journal of Theoretical and
Applied Information Technology, 10th June 2014.